1if ARCH_ROCKCHIP 2 3config ROCKCHIP_PX30 4 bool "Support Rockchip PX30" 5 select ARM64 if !ARM64_BOOT_AARCH32 6 select GICV2 7 select ARM_SMCCC 8 select SUPPORT_SPL 9 select SUPPORT_TPL 10 select SPL if !ARM64_BOOT_AARCH32 11 select TPL if !ARM64_BOOT_AARCH32 12 select TPL_TINY_FRAMEWORK if TPL 13 14 imply SPL_SEPARATE_BSS 15 imply SPL_SERIAL_SUPPORT 16 imply TPL_SERIAL_SUPPORT 17 help 18 The Rockchip PX30 is a ARM-based SoC with a quad-core Cortex-A35 19 including NEON and GPU, Mali-400 graphics, several DDR3 options 20 and video codec support. Peripherals include Gigabit Ethernet, 21 USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. 22 23if ROCKCHIP_PX30 24 25config TPL_LDSCRIPT 26 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 27 28config TPL_TEXT_BASE 29 default 0xff0e1000 30 31config TPL_MAX_SIZE 32 default 10240 33 34config ROCKCHIP_RK3326 35 bool "Support Rockchip RK3326 " 36 help 37 RK3326 can use most code from PX30, but at some situations we have 38 to distinguish between RK3326 and PX30, so this macro gives help. 39 It is usually selected in rk3326 board defconfig. 40endif 41 42config ROCKCHIP_RK3036 43 bool "Support Rockchip RK3036" 44 select CPU_V7 45 select SUPPORT_SPL 46 select SUPPORT_TPL 47 select SPL 48 select TPL 49 select BOARD_LATE_INIT 50 select ROCKCHIP_BROM_HELPER 51 select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL 52 select TPL_NEEDS_SEPARATE_STACK if TPL 53 select ARM_SMCCC 54 help 55 The Rockchip RK3036 is a ARM-based SoC with a dual-core Cortex-A7 56 including NEON and GPU, Mali-400 graphics, several DDR3 options 57 and video codec support. Peripherals include Gigabit Ethernet, 58 USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. 59 60config ROCKCHIP_RK3128 61 bool "Support Rockchip RK3128" 62 select CPU_V7 63 select GICV2 64 select ARM_SMCCC 65 help 66 The Rockchip RK3128 is a ARM-based SoC with a quad-core Cortex-A7 67 including NEON and GPU, Mali-400 graphics, several DDR3 options 68 and video codec support. Peripherals include Gigabit Ethernet, 69 USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. 70 71if ROCKCHIP_RK3128 72 73config ROCKCHIP_RK3126 74 bool "Support Rockchip RK3126 " 75 help 76 RK3126 can use most code from RK3128, but at some situations we have 77 to distinguish between RK3126 and RK3128, so this macro gives help. 78 It is usually selected in rk3126 board defconfig. 79 80config ROCKCHIP_PX3SE 81 bool "Support Rockchip PX3SE" 82 help 83 PX3SE is a variant of RK3128, it shares codes with RK3128, but we still 84 need this macro to distinguish PX3SE and RK3128. 85endif 86 87config ROCKCHIP_RK3066 88 bool "Support Rockchip RK3066" 89 select CPU_V7 90 select SUPPORT_SPL 91 select SUPPORT_TPL 92 select SPL 93 select TPL 94 select BOARD_LATE_INIT 95 select ROCKCHIP_BROM_HELPER 96 select SPL_ROCKCHIP_EARLYRETURN_TO_BROM 97 help 98 The Rockchip RK3066 is a ARM-based SoC with a dual-core Cortex-A9 99 including NEON and GPU, Mali-400 graphics, several DDR3 options 100 and video codec support. Peripherals include ethernet, USB2 host 101 and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. 102 103config ROCKCHIP_RK3188 104 bool "Support Rockchip RK3188" 105 select CPU_V7 106 select SPL_BOARD_INIT if SPL 107 select SUPPORT_SPL 108 select SPL 109 select SPL_CLK 110 select SPL_REGMAP 111 select SPL_SYSCON 112 select SPL_RAM 113 select SPL_DRIVERS_MISC_SUPPORT 114 select SPL_ROCKCHIP_EARLYRETURN_TO_BROM 115 select BOARD_LATE_INIT 116 select ROCKCHIP_BROM_HELPER 117 help 118 The Rockchip RK3188 is a ARM-based SoC with a quad-core Cortex-A9 119 including NEON and GPU, 512KB L2 cache, Mali-400 graphics, two 120 video interfaces, several memory options and video codec support. 121 Peripherals include Fast Ethernet, USB2 host and OTG, SDIO, I2S, 122 UART, SPI, I2C and PWMs. 123 124config ROCKCHIP_RK322X 125 bool "Support Rockchip RK3228/RK3229" 126 select CPU_V7 127 select SUPPORT_SPL 128 select SUPPORT_TPL 129 select SPL 130 select TPL 131 select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL 132 select TPL_NEEDS_SEPARATE_STACK if TPL 133 select SPL_DRIVERS_MISC_SUPPORT 134 imply SPL_SERIAL_SUPPORT 135 imply TPL_SERIAL_SUPPORT 136 select ROCKCHIP_BROM_HELPER 137 select TPL_LIBCOMMON_SUPPORT 138 select TPL_LIBGENERIC_SUPPORT 139 select GICV2 140 select ARM_SMCCC 141 help 142 The Rockchip RK3229 is a ARM-based SoC with a dual-core Cortex-A7 143 including NEON and GPU, Mali-400 graphics, several DDR3 options 144 and video codec support. Peripherals include Gigabit Ethernet, 145 USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. 146 147if ROCKCHIP_RK322X 148 149config ROCKCHIP_RK3128X 150 bool "Support Rockchip RK3128X " 151 help 152 RK3128X can use most code from RK322X, but at some situations we have 153 to distinguish between RK3128X and RK322X, so this macro gives help. 154 It is usually selected in RK3128X board defconfig. 155endif 156 157config ROCKCHIP_RK3288 158 bool "Support Rockchip RK3288" 159 select CPU_V7 160 select SPL_BOARD_INIT if SPL 161 select SUPPORT_SPL 162 select SUPPORT_TPL 163 select SPL 164 select TPL 165 select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL 166 select TPL_NEEDS_SEPARATE_STACK if TPL 167 imply TPL_SERIAL_SUPPORT 168 select GICV2 169 select ARM_SMCCC 170 select SPL_OPTEE 171 select FIT 172 select SPL_LOAD_FIT 173 select TPL_LIBCOMMON_SUPPORT 174 select TPL_LIBGENERIC_SUPPORT 175 select TPL_SYS_MALLOC_SIMPLE 176 select TPL_BOOTROM_SUPPORT 177 select TPL_DRIVERS_MISC_SUPPORT 178 select TPL_OF_CONTROL 179 select TPL_DM 180 select TPL_REGMAP 181 select TPL_SYSCON 182 select TPL_RAM 183 select TPL_CLK 184 select TPL_TINY_MEMSET 185 help 186 The Rockchip RK3288 is a ARM-based SoC with a quad-core Cortex-A17 187 including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two 188 video interfaces supporting HDMI and eDP, several DDR3 options 189 and video codec support. Peripherals include Gigabit Ethernet, 190 USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs. 191 192if ROCKCHIP_RK3288 193config SPL_FIT_GENERATOR 194 default "arch/arm/mach-rockchip/make_fit_optee.sh" 195 196config TPL_LDSCRIPT 197 default "arch/arm/mach-rockchip/u-boot-tpl.lds" 198 199config TPL_TEXT_BASE 200 default 0xff704000 201 202config TPL_MAX_SIZE 203 default 32768 204 205config TPL_STACK 206 default 0xff718000 207 208endif 209 210config ROCKCHIP_RK3308 211 bool "Support Rockchip RK3308" 212 select ARM64 if !ARM64_BOOT_AARCH32 213 select ARM_SMCCC 214 select GICV2 215 select SUPPORT_SPL if !ARM64_BOOT_AARCH32 216 select SUPPORT_TPL if !ARM64_BOOT_AARCH32 217 select SPL if !ARM64_BOOT_AARCH32 218 select TPL if !ARM64_BOOT_AARCH32 219 imply SPL_CLK 220 imply SPL_REGMAP 221 imply SPL_SYSCON 222 imply SPL_RAM 223 imply SPL_SERIAL_SUPPORT 224 imply TPL_SERIAL_SUPPORT 225 imply SPL_SEPARATE_BSS 226 help 227 The Rockchip RK3308 is a ARM-based Soc which embeded with quad 228 Cortex-A35 and highly integrated audio interfaces. 229 230if ROCKCHIP_RK3308 231 232config TPL_LDSCRIPT 233 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 234 235config TPL_TEXT_BASE 236 default 0xfff81000 237 238config TPL_MAX_SIZE 239 default 10240 240 241config TPL_STACK 242 default 0xfff84000 243 244endif 245 246config ROCKCHIP_RK3328 247 bool "Support Rockchip RK3328" 248 select ARM64 249 select GICV2 250 select SUPPORT_SPL 251 select SUPPORT_TPL 252 select SPL 253 select TPL 254 select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL 255 select TPL_NEEDS_SEPARATE_STACK if TPL 256 imply SPL_SERIAL_SUPPORT 257 imply TPL_SERIAL_SUPPORT 258 imply SPL_SEPARATE_BSS 259 select ARM_SMCCC 260 help 261 The Rockchip RK3328 is a ARM-based SoC with a quad-core Cortex-A53. 262 including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two 263 video interfaces supporting HDMI and eDP, several DDR3 options 264 and video codec support. Peripherals include Gigabit Ethernet, 265 USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs. 266 267if ROCKCHIP_RK3328 268 269config TPL_LDSCRIPT 270 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 271 272config TPL_TEXT_BASE 273 default 0xff091000 274 275config TPL_MAX_SIZE 276 default 28672 277 278config TPL_STACK 279 default 0xff098000 280 281endif 282 283config ROCKCHIP_RK3368 284 bool "Support Rockchip RK3368" 285 select ARM64 286 select SUPPORT_SPL 287 select SUPPORT_TPL 288 select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL 289 select TPL_NEEDS_SEPARATE_STACK if TPL 290 imply SPL_SEPARATE_BSS 291 imply SPL_SERIAL_SUPPORT 292 imply TPL_SERIAL_SUPPORT 293 select GICV2 294 select ARM_SMCCC 295 help 296 The Rockchip RK3368 is a ARM-based SoC with a octa-core (organised 297 into a big and little cluster with 4 cores each) Cortex-A53 including 298 AdvSIMD, 512KB L2 cache (for the big cluster) and 256 KB L2 cache 299 (for the little cluster), PowerVR G6110 based graphics, one video 300 output processor supporting LVDS/HDMI/eDP, several DDR3 options and 301 video codec support. 302 303 On-chip peripherals include Gigabit Ethernet, USB2 host and OTG, SDIO, 304 I2S, UARTs, SPI, I2C and PWMs. 305 306if ROCKCHIP_RK3368 307 308config ROCKCHIP_PX5 309 bool "Support Rockchip PX5" 310 help 311 PX5 is a variant of RK3368, it shares codes with RK3368, but we still 312 need this macro to distinguish PX5 and RK3368. 313 314config TPL_LDSCRIPT 315 default "arch/arm/mach-rockchip/rk3368/u-boot-tpl.lds" 316 317config TPL_TEXT_BASE 318 default 0xff8c1000 319 320config TPL_MAX_SIZE 321 default 28672 322 323config TPL_STACK 324 default 0xff8cffff 325 326endif 327 328config ROCKCHIP_RK3399 329 bool "Support Rockchip RK3399" 330 select ARM64 331 select SUPPORT_SPL 332 select SUPPORT_TPL 333 select SPL 334 select TPL 335 select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL 336 select TPL_NEEDS_SEPARATE_STACK if TPL 337 imply TPL_SERIAL_SUPPORT 338 select SPL_SEPARATE_BSS 339 select SPL_SERIAL_SUPPORT 340 select SPL_DRIVERS_MISC_SUPPORT 341 select GICV3 342 select BOARD_LATE_INIT 343 select ROCKCHIP_BROM_HELPER 344 select ARM_SMCCC 345 select TPL_LIBCOMMON_SUPPORT 346 select TPL_LIBGENERIC_SUPPORT 347 select TPL_SYS_MALLOC_SIMPLE 348 select TPL_BOOTROM_SUPPORT 349 select TPL_DRIVERS_MISC_SUPPORT 350 select TPL_OF_CONTROL 351 select TPL_DM 352 select TPL_REGMAP 353 select TPL_SYSCON 354 select TPL_RAM 355 select TPL_CLK 356 select TPL_TINY_MEMSET 357 help 358 The Rockchip RK3399 is a ARM-based SoC with a dual-core Cortex-A72 359 and quad-core Cortex-A53. 360 including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two 361 video interfaces supporting HDMI and eDP, several DDR3 options 362 and video codec support. Peripherals include Gigabit Ethernet, 363 USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs. 364 365if ROCKCHIP_RK3399 366 367config ROCKCHIP_RK3399PRO 368 bool "Support Rockchip RK3399Pro" 369 370config TPL_LDSCRIPT 371 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 372 373config TPL_TEXT_BASE 374 default 0xff8c2000 375 376config TPL_MAX_SIZE 377 default 188416 378 379config TPL_STACK 380 default 0xff8effff 381 382endif 383 384config ROCKCHIP_RK3568 385 bool "Support Rockchip RK3568" 386 select ARM64 if !ARM64_BOOT_AARCH32 387 select ARM_SMCCC 388 select GICV3 if !ARM64_BOOT_AARCH32 && !SUPPORT_USBPLUG 389 select SUPPORT_TPL if !ARM64_BOOT_AARCH32 390 select SUPPORT_SPL if !ARM64_BOOT_AARCH32 391 select TPL_TINY_FRAMEWORK if TPL 392 select DEBUG_UART_BOARD_INIT 393 imply TPL if !ARM64_BOOT_AARCH32 394 imply SPL if !ARM64_BOOT_AARCH32 395 imply TPL_SERIAL_SUPPORT 396 help 397 The Rockchip RK3568 is a ARM-based SoC with a quad-core Cortex-A55. 398 399if ROCKCHIP_RK3568 400 401config TPL_LDSCRIPT 402 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 403 404config TPL_TEXT_BASE 405 default 0xfdcc1000 406 407config TPL_MAX_SIZE 408 default 61440 409 410endif 411 412config ROCKCHIP_RK3588 413 bool "Support Rockchip RK3588" 414 select ARM64 if !ARM64_BOOT_AARCH32 415 select ARM_SMCCC 416 select DEBUG_UART_BOARD_INIT 417 select GICV3 if !ARM64_BOOT_AARCH32 && !SUPPORT_USBPLUG 418 select ROCKCHIP_BROM_HELPER 419 select SUPPORT_SPL if !ARM64_BOOT_AARCH32 420 select SUPPORT_TPL if !ARM64_BOOT_AARCH32 421 select TPL_TINY_FRAMEWORK if TPL 422 imply TPL if !ARM64_BOOT_AARCH32 423 imply SPL if !ARM64_BOOT_AARCH32 424 imply TPL_SERIAL_SUPPORT 425 select DEBUG_UART_BOARD_INIT 426 help 427 The Rockchip RK3588 is a ARM-based SoC with a quad-core Cortex-A55. 428 429if ROCKCHIP_RK3588 430 431config TPL_LDSCRIPT 432 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 433 434config TPL_TEXT_BASE 435 default 0xfdcc1000 436 437config TPL_MAX_SIZE 438 default 61440 439endif 440 441config ROCKCHIP_RK1808 442 bool "Support Rockchip RK1808" 443 select ARM64 444 select ARM_SMCCC 445 select GICV3 if !COPROCESSOR_RK1808 446 select SUPPORT_SPL if !COPROCESSOR_RK1808 447 select SUPPORT_TPL if !COPROCESSOR_RK1808 448 help 449 The Rockchip RK1808 is a ARM-based Soc which embedded with dual 450 Cortex-A35. 451 452if ROCKCHIP_RK1808 453 454config ROCKCHIP_RK1806 455 bool "Support Rockchip RK1806" 456 help 457 The Rockchip RK1806 is a ARM-based Soc which embedded with dual 458 Cortex-A35. 459 460config COPROCESSOR_RK1808 461 bool "RK1808 coprocessor" 462 help 463 This indicates the RK1808 is working as a coprocessor for another 464 more powerful SoC. 465 466endif 467 468config ROCKCHIP_RV1108 469 bool "Support Rockchip RV1108" 470 select CPU_V7 471 select SUPPORT_SPL 472 select SUPPORT_TPL 473 select SPL 474 select TPL 475 select BOARD_LATE_INIT 476 help 477 The Rockchip RV1108 is a ARM-based SoC with a single-core Cortex-A7 478 and a DSP. 479 480if ROCKCHIP_RV1108 481 482config TPL_LDSCRIPT 483 default "arch/arm/mach-rockchip/u-boot-tpl.lds" 484 485config TPL_TEXT_BASE 486 default 0x10080800 487 488config TPL_MAX_SIZE 489 default 6144 490 491config TPL_STACK 492 default 0x10082000 493 494endif 495 496config ROCKCHIP_RV1126 497 bool "Support Rockchip RV1126" 498 select CPU_V7 499 select SUPPORT_TPL 500 select SUPPORT_SPL 501 select TPL_TINY_FRAMEWORK if TPL 502 select DEBUG_UART_BOARD_INIT 503 imply TPL 504 imply SPL 505 imply GICV2 506 imply ARM_SMCCC 507 imply BOARD_LATE_INIT 508 imply ROCKCHIP_GPIO_V2 509 imply TPL_SERIAL_SUPPORT 510 help 511 The Rockchip RV1126 is a ARM-based SoC with a quad-core Cortex-A7 512 and a risc-v core. 513 514if ROCKCHIP_RV1126 515 516config TPL_LDSCRIPT 517 default "arch/arm/mach-rockchip/u-boot-tpl.lds" 518 519config TPL_TEXT_BASE 520 default 0xff701000 521 522config TPL_MAX_SIZE 523 default 32768 524endif 525 526config SPL_ROCKCHIP_BACK_TO_BROM 527 bool "SPL returns to bootrom" 528 default y if ROCKCHIP_RK3036 529 select ROCKCHIP_BROM_HELPER 530 depends on SPL 531 help 532 Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled, 533 SPL will return to the boot rom, which will then load the U-Boot 534 binary to keep going on. 535 536config TPL_ROCKCHIP_BACK_TO_BROM 537 bool "TPL returns to bootrom" 538 default y 539 select ROCKCHIP_BROM_HELPER 540 depends on TPL 541 help 542 Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled, 543 SPL will return to the boot rom, which will then load the U-Boot 544 binary to keep going on. 545 546config ARM64_BOOT_AARCH32 547 bool "Support Boot an ARM64 on AArch32 execution state, ie. U-Boot is in AArch32" 548 select CPU_V7 549 default n 550 help 551 If you want to boot an ARM64 processor on 32-bit mode, say y here. 552 553config ARM64_SWITCH_TO_AARCH32 554 bool "Support AArch64 U-Boot boot AArch32 kernel" 555 default n 556 help 557 If you want AArch64 U-Boot to boot AArch32 kernel, say y here. 558 This feature needs ATF to help switch the PE state. 559 560config ROCKCHIP_BOOT_MODE_REG 561 hex "Rockchip boot mode flag register address" 562 default 0xff010200 if ROCKCHIP_PX30 563 default 0x200081c8 if ROCKCHIP_RK3036 564 default 0x100a0038 if ROCKCHIP_RK3128 565 default 0x20004040 if ROCKCHIP_RK3188 566 default 0x110005c8 if ROCKCHIP_RK322X 567 default 0xff730094 if ROCKCHIP_RK3288 568 default 0xff000500 if ROCKCHIP_RK3308 569 default 0xff1005c8 if ROCKCHIP_RK3328 570 default 0xff738200 if ROCKCHIP_RK3368 571 default 0xff320300 if ROCKCHIP_RK3399 572 default 0xfdc20200 if ROCKCHIP_RK3568 573 default 0xfd588080 if ROCKCHIP_RK3588 574 default 0xfe020200 if ROCKCHIP_RK1808 575 default 0x10300580 if ROCKCHIP_RV1108 576 default 0xfe020200 if ROCKCHIP_RV1126 577 default 0 578 help 579 The Soc will enter to different boot mode(defined in asm/arch/boot_mode.h) 580 according to the value from this register. 581 582config ROCKCHIP_STIMER_BASE 583 hex "Rockchip Secure timer base address" 584 default 0xff220020 if ROCKCHIP_PX30 585 default 0x200440a0 if ROCKCHIP_RK3036 586 default 0x2000e000 if ROCKCHIP_RK3066 587 default 0x20018020 if ROCKCHIP_RK3126 588 default 0x200440a0 if ROCKCHIP_RK3128 589 default 0x2000e000 if ROCKCHIP_RK3188 590 default 0x110d0020 if ROCKCHIP_RK322X 591 default 0xff810020 if ROCKCHIP_RK3288 592 default 0xff1b00a0 if ROCKCHIP_RK3308 593 default 0xff1d0020 if ROCKCHIP_RK3328 594 default 0xff830020 if ROCKCHIP_RK3368 595 default 0xff8680a0 if ROCKCHIP_RK3399 596 default 0xfdd1c020 if ROCKCHIP_RK3568 597 default 0xfd8c8000 if ROCKCHIP_RK3588 598 default 0x10350020 if ROCKCHIP_RV1108 599 default 0xff670020 if ROCKCHIP_RV1126 600 default 0 601 help 602 The secure timer inited in SPL/TPL in secure word, ARM generic timer 603 works after this timer work. 604 605config ROCKCHIP_IRAM_START_ADDR 606 hex "Rockchip Secure timer base address" 607 default 0xff0e0000 if ROCKCHIP_PX30 608 default 0x10080000 if ROCKCHIP_RK3036 609 default 0x10080000 if ROCKCHIP_RK3128 610 default 0x10080000 if ROCKCHIP_RK3188 611 default 0x10080000 if ROCKCHIP_RK322X 612 default 0xff700000 if ROCKCHIP_RK3288 613 default 0xfff80000 if ROCKCHIP_RK3308 614 default 0xff091000 if ROCKCHIP_RK3328 615 default 0xff8c0000 if ROCKCHIP_RK3368 616 default 0xff8c0000 if ROCKCHIP_RK3399 617 default 0xfdcc0000 if ROCKCHIP_RK3568 618 default 0xff000000 if ROCKCHIP_RK3588 619 default 0x10080000 if ROCKCHIP_RV1108 620 default 0xff700000 if ROCKCHIP_RV1126 621 default 0 622 help 623 The IRAM start addr is to locate variant of the boot device from 624 bootrom. 625 626config ROCKCHIP_SPL_RESERVE_IRAM 627 hex "Size of IRAM reserved in SPL" 628 default 0 629 help 630 SPL may need reserve memory for firmware loaded by SPL, whose load 631 address is in IRAM and may overlay with SPL text area if not 632 reserved. 633 634config ROCKCHIP_BROM_HELPER 635 bool 636 637config SPL_ROCKCHIP_EARLYRETURN_TO_BROM 638 bool "SPL requires early-return (for RK3188-style BROM) to BROM" 639 depends on SPL && ENABLE_ARM_SOC_BOOT0_HOOK 640 help 641 Some Rockchip BROM variants (e.g. on the RK3188) load the 642 first stage in segments and enter multiple times. E.g. on 643 the RK3188, the first 1KB of the first stage are loaded 644 first and entered; after returning to the BROM, the 645 remainder of the first stage is loaded, but the BROM 646 re-enters at the same address/to the same code as previously. 647 648 This enables support code in the BOOT0 hook for the SPL stage 649 to allow multiple entries. 650 651config TPL_ROCKCHIP_EARLYRETURN_TO_BROM 652 bool "TPL requires early-return (for RK3188-style BROM) to BROM" 653 depends on TPL && ENABLE_ARM_SOC_BOOT0_HOOK 654 help 655 Some Rockchip BROM variants (e.g. on the RK3188) load the 656 first stage in segments and enter multiple times. E.g. on 657 the RK3188, the first 1KB of the first stage are loaded 658 first and entered; after returning to the BROM, the 659 remainder of the first stage is loaded, but the BROM 660 re-enters at the same address/to the same code as previously. 661 662 This enables support code in the BOOT0 hook for the TPL stage 663 to allow multiple entries. 664 665config SPL_MMC_SUPPORT 666 default y if !SPL_ROCKCHIP_BACK_TO_BROM && MMC 667 668config RKIMG_BOOTLOADER 669 bool "Support for Rockchip platform features" 670 default y 671 help 672 Actually this is a compatible configure for code compilation. 673 674config RKIMG_ANDROID_BOOTMODE_LEGACY 675 bool "Support set androidboot.mode with legacy rule" 676 depends on RKIMG_BOOTLOADER 677 default n 678 help 679 Rockchip set "androidboot.mode=" as "charger" or boot media for android, 680 which is a rockchip private solution(SDK < 8.1) and deprecated. 681 682config ROCKCHIP_RESOURCE_IMAGE 683 bool "Enable support for rockchip resource image" 684 depends on RKIMG_BOOTLOADER 685 default y 686 help 687 This enables support to get dtb or logo files from 688 rockchip resource image format partition. 689 690config ROCKCHIP_DTB_VERIFY 691 bool "Enable hash verify for DTB in the resource file" 692 depends on ROCKCHIP_RESOURCE_IMAGE 693 select SHA1 if !DM_CRYPTO 694 select SHA256 if !DM_CRYPTO 695 default y 696 help 697 This enables the hash verify for DTB in the resource file, it means we 698 always read DTB from second position even the DTB position is present. 699 700config ROCKCHIP_USB_BOOT 701 bool "Enable support for rockchip U-disk boot" 702 depends on USB 703 default n 704 help 705 This enables support for rockchip U-disk boot. 706 707config ROCKCHIP_FIT_IMAGE 708 bool "Enable support for FIT image" 709 depends on FIT 710 select CMD_BOOT_FIT 711 default n 712 help 713 This enables loading dtb from fit image. 714 715config ROCKCHIP_UIMAGE 716 bool "Enable support for legacy uImage" 717 depends on !FIT_SIGNATURE && USING_KERNEL_DTB 718 select CMD_BOOT_UIMAGE 719 default n 720 help 721 This enables loading dtb from uImage image. 722 723config ROCKCHIP_EARLY_DISTRO_DTB 724 bool "Enable support for distro dtb early" 725 depends on DISTRO_DEFAULTS && USING_KERNEL_DTB && CMD_FS_GENERIC 726 default n 727 help 728 This enables loading dtb from distro bootable partition when there 729 is no valid dtb in android boot.img and rockchip resource.img. 730 731if ROCKCHIP_EARLY_DISTRO_DTB 732 733config ROCKCHIP_EARLY_DISTRO_DTB_PATH 734 string "/rk-kernel.dtb" 735 help 736 "DTB file path in the bootable partition image" 737endif 738 739config ROCKCHIP_HWID_DTB 740 bool "Enable support for selecting DTB by hardware id" 741 depends on ROCKCHIP_RESOURCE_IMAGE 742 default n 743 help 744 This enables select the expected DTB from sets by hardware id, 745 i.e. GPIO or ADC value. 746 747config ROCKCHIP_VENDOR_PARTITION 748 bool "Rockchip vendor storage partition support" 749 depends on RKIMG_BOOTLOADER 750 help 751 This enable support to read/write vendor configuration data from/to 752 this partition. 753 754config USING_KERNEL_DTB 755 bool "Using dtb from Kernel/resource for U-Boot" 756 depends on RKIMG_BOOTLOADER && OF_LIVE 757 default y 758 help 759 This enable support to read dtb from resource and use it for U-Boot, 760 the uart and emmc will still using U-Boot dtb, but other devices like 761 regulator/pmic, display, usb will use dts node from kernel. 762 763config USING_KERNEL_DTB_V2 764 bool "Version 2 of kernel dtb mechanism" 765 depends on USING_KERNEL_DTB 766 default n 767 help 768 The V2 mechanism: 769 - both of U-Boot and kernel's *ALL* devices are exist in dm tree. 770 - put the necessary U-Boot devices in the head of device uclass list. 771 - the both existence policy don't require phandle fixup any more. 772 - it is for the next generation(rk3588 ...) or necessary platforms. 773 The V1 mechanism(legacy): 774 - U-Boot: only some necessary U-Boot devices(storage, crypto...) in dm tree. 775 - kernel: all the devices(except the U-Boot only) in dm tree. 776 777config EMBED_KERNEL_DTB_PATH 778 string "Embeded kernel dtb file path" 779 depends on USING_KERNEL_DTB 780 default "dts/kern.dtb" 781 help 782 This file will auto be appended to the u-boot.bin. 783 784config EMBED_KERNEL_DTB_ALWAYS 785 bool "Always using embed kernel dtb" 786 depends on USING_KERNEL_DTB 787 default n 788 help 789 Allow fallback to always use a prepared kernel dtb even USING_KERNEL_DTB 790 is set. This makes U-Boot stage more stable but not flexible any more to 791 compatible different boards. 792 793config ROCKCHIP_CRC 794 bool "Rockchip CRC verify images" 795 help 796 This enable support Rockchip CRC verify images. It takes a lot of time, 797 so it is better only used for debug. 798 799config ROCKCHIP_SMCCC 800 bool "Rockchip SMCCC" 801 default y if ARM_SMCCC 802 help 803 This enable support for Rockchip SMC calls 804 805config ROCKCHIP_DEBUGGER 806 bool "Rockchip debugger" 807 depends on IRQ 808 help 809 This enable support for Rockchip debugger. Now we install a timer interrupt 810 and dump pt_regs when the timeout event trigger. This helps us to know cpu 811 state when system hang. 812 813config ROCKCHIP_CRASH_DUMP 814 bool "Rockchip crash dump registers" 815 help 816 This enable dump registers when system crash, the registers you would like 817 to dump can be added in show_regs(). 818 819config ROCKCHIP_PRELOADER_ATAGS 820 bool "Rockchip pre-loader atags" 821 default y if ARCH_ROCKCHIP 822 help 823 This enable support Rockchip atags among pre-loaders, i.e. ddr, miniloader, ATF, 824 tos, U-Boot, etc. It delivers boot and configure information, shared with pre-loaders 825 and finally ends with U-Boot. 826 827config ROCKCHIP_PRELOADER_SERIAL 828 bool "Rockchip pre-loader serial" 829 default y if ROCKCHIP_PRELOADER_ATAGS 830 help 831 This enable U-Boot using pre-loader atags serial configure to initialize console. 832 It denpends on serial aliases to find pre-loader serial number. 833 834config ROCKCHIP_FIT_IMAGE_PACK 835 bool "Rockchip fit image pack of U-Boot and TEE" 836 depends on ROCKCHIP_FIT_IMAGE 837 default n 838 help 839 This enable fit image pack of U-Boot and TEE, it's used for make.sh script. 840 841config ROCKCHIP_UART_MUX_SEL_M 842 int "UART mux select" 843 default 0 844 depends on TPL 845 help 846 This select uart multiplexer for debug uart iomux in board_debug_uart_init. 847 848config ROCKCHIP_REBOOT_TEST 849 bool "Rockchip reboot stress test before kernel" 850 default n 851 help 852 It's a reboot stress test before kernel stages. 853 854config ROCKCHIP_NEW_IDB 855 bool "Rockchip new IDB header" 856 default n 857 help 858 The new IDB header was introduced from RK356X. 859 860config GICV2 861 bool "ARM GICv2" 862 863config GICV3 864 bool "ARM GICv3" 865 866config ROCKCHIP_EMMC_IOMUX 867 bool "ROCKCHIP EMMC IOMUX" 868 default n 869 help 870 This enable U-Boot to config EMMC iomux. 871 872config ROCKCHIP_NAND_IOMUX 873 bool "ROCKCHIP NAND IOMUX" 874 default n 875 help 876 This enable U-Boot to config NAND iomux. 877 878config ROCKCHIP_SFC_IOMUX 879 bool "ROCKCHIP SFC IOMUX" 880 default n 881 help 882 This enable U-Boot to config SFC iomux. 883 884config BASE_DEFCONFIG 885 string "Base defconfig of config fragment" 886 default "" 887 help 888 Indicate the base defconfig of config fragment. 889 890config CHIP_NAME 891 string "Chip label name" 892 default "" 893 894config LOADER_INI 895 string "Name of Loader ini file in rkbin repository" 896 default "" 897 help 898 The ini file is used to pack loader image. 899 900config TRUST_INI 901 string "Name of Trust ini file in rkbin repository" 902 default "" 903 help 904 The ini file is used to pack trust image. 905 906if !ROCKCHIP_FIT_IMAGE_PACK 907config UBOOT_SIZE_KB 908 int "Per u-boot.bin Image size, unit: KB" 909 default 1024 910 911config UBOOT_NUM 912 int "Number of u-boot.bin image being packed into trust.img" 913 default 4 914 915config TRUST_SIZE_KB 916 int "Per trust Image size, unit: KB" 917 default 2048 918 919config TRUST_NUM 920 int "Number of trust image being packed into trust.img" 921 default 2 922 923config TRUST_RSA_MODE 924 int "RSA mode of trust.img on ARM64" 925 default 2 926 help 927 The RSA mode for tools to pack, the mode id can be: 928 0: none; 1: RSA-1024; 2: RSA-2048; 3: RSA-2048-pss. 929 930config TRUST_SHA_MODE 931 int "SHA mode of trust.img on ARM64" 932 default 3 933 help 934 The SHA mode for tools to pack, the mode id can be: 935 0: none; 1: sha1; 2: sha256 RK big endian; 3: sha256 little endian. 936endif 937 938source "arch/arm/mach-rockchip/px30/Kconfig" 939source "arch/arm/mach-rockchip/rk3036/Kconfig" 940source "arch/arm/mach-rockchip/rk3066/Kconfig" 941source "arch/arm/mach-rockchip/rk3128/Kconfig" 942source "arch/arm/mach-rockchip/rk3188/Kconfig" 943source "arch/arm/mach-rockchip/rk322x/Kconfig" 944source "arch/arm/mach-rockchip/rk3288/Kconfig" 945source "arch/arm/mach-rockchip/rk3308/Kconfig" 946source "arch/arm/mach-rockchip/rk3328/Kconfig" 947source "arch/arm/mach-rockchip/rk3368/Kconfig" 948source "arch/arm/mach-rockchip/rk3399/Kconfig" 949source "arch/arm/mach-rockchip/rk3568/Kconfig" 950source "arch/arm/mach-rockchip/rk3588/Kconfig" 951source "arch/arm/mach-rockchip/rk1808/Kconfig" 952source "arch/arm/mach-rockchip/rv1108/Kconfig" 953source "arch/arm/mach-rockchip/rv1126/Kconfig" 954 955endif 956