1if ARCH_ROCKCHIP 2 3config ROCKCHIP_PX30 4 bool "Support Rockchip PX30" 5 select ARM64 if !ARM64_BOOT_AARCH32 6 select GICV2 7 select ARM_SMCCC 8 select SUPPORT_SPL 9 select SUPPORT_TPL 10 select SPL if !ARM64_BOOT_AARCH32 11 select TPL if !ARM64_BOOT_AARCH32 12 select TPL_TINY_FRAMEWORK if TPL 13 14 imply SPL_SEPARATE_BSS 15 imply SPL_SERIAL_SUPPORT 16 imply TPL_SERIAL_SUPPORT 17 help 18 The Rockchip PX30 is a ARM-based SoC with a quad-core Cortex-A35 19 including NEON and GPU, Mali-400 graphics, several DDR3 options 20 and video codec support. Peripherals include Gigabit Ethernet, 21 USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. 22 23if ROCKCHIP_PX30 24 25config TPL_LDSCRIPT 26 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 27 28config TPL_TEXT_BASE 29 default 0xff0e1000 30 31config TPL_MAX_SIZE 32 default 10240 33 34config ROCKCHIP_RK3326 35 bool "Support Rockchip RK3326 " 36 help 37 RK3326 can use most code from PX30, but at some situations we have 38 to distinguish between RK3326 and PX30, so this macro gives help. 39 It is usually selected in rk3326 board defconfig. 40endif 41 42config ROCKCHIP_RK3036 43 bool "Support Rockchip RK3036" 44 select CPU_V7 45 select SUPPORT_SPL 46 select SUPPORT_TPL 47 select SPL 48 select TPL 49 select BOARD_LATE_INIT 50 select ROCKCHIP_BROM_HELPER 51 select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL 52 select TPL_NEEDS_SEPARATE_STACK if TPL 53 select ARM_SMCCC 54 help 55 The Rockchip RK3036 is a ARM-based SoC with a dual-core Cortex-A7 56 including NEON and GPU, Mali-400 graphics, several DDR3 options 57 and video codec support. Peripherals include Gigabit Ethernet, 58 USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. 59 60config ROCKCHIP_RK3128 61 bool "Support Rockchip RK3128" 62 select CPU_V7 63 select GICV2 64 select ARM_SMCCC 65 help 66 The Rockchip RK3128 is a ARM-based SoC with a quad-core Cortex-A7 67 including NEON and GPU, Mali-400 graphics, several DDR3 options 68 and video codec support. Peripherals include Gigabit Ethernet, 69 USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. 70 71if ROCKCHIP_RK3128 72 73config ROCKCHIP_RK3126 74 bool "Support Rockchip RK3126 " 75 help 76 RK3126 can use most code from RK3128, but at some situations we have 77 to distinguish between RK3126 and RK3128, so this macro gives help. 78 It is usually selected in rk3126 board defconfig. 79 80config ROCKCHIP_PX3SE 81 bool "Support Rockchip PX3SE" 82 help 83 PX3SE is a variant of RK3128, it shares codes with RK3128, but we still 84 need this macro to distinguish PX3SE and RK3128. 85endif 86 87config ROCKCHIP_RK3066 88 bool "Support Rockchip RK3066" 89 select CPU_V7 90 select SUPPORT_SPL 91 select SUPPORT_TPL 92 select SPL 93 select TPL 94 select BOARD_LATE_INIT 95 select ROCKCHIP_BROM_HELPER 96 select SPL_ROCKCHIP_EARLYRETURN_TO_BROM 97 help 98 The Rockchip RK3066 is a ARM-based SoC with a dual-core Cortex-A9 99 including NEON and GPU, Mali-400 graphics, several DDR3 options 100 and video codec support. Peripherals include ethernet, USB2 host 101 and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. 102 103config ROCKCHIP_RK3188 104 bool "Support Rockchip RK3188" 105 select CPU_V7 106 select SPL_BOARD_INIT if SPL 107 select SUPPORT_SPL 108 select SPL 109 select SPL_CLK 110 select SPL_REGMAP 111 select SPL_SYSCON 112 select SPL_RAM 113 select SPL_DRIVERS_MISC_SUPPORT 114 select SPL_ROCKCHIP_EARLYRETURN_TO_BROM 115 select BOARD_LATE_INIT 116 select ROCKCHIP_BROM_HELPER 117 help 118 The Rockchip RK3188 is a ARM-based SoC with a quad-core Cortex-A9 119 including NEON and GPU, 512KB L2 cache, Mali-400 graphics, two 120 video interfaces, several memory options and video codec support. 121 Peripherals include Fast Ethernet, USB2 host and OTG, SDIO, I2S, 122 UART, SPI, I2C and PWMs. 123 124config ROCKCHIP_RK322X 125 bool "Support Rockchip RK3228/RK3229" 126 select CPU_V7 127 select SUPPORT_SPL 128 select SUPPORT_TPL 129 select SPL 130 select TPL 131 select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL 132 select TPL_NEEDS_SEPARATE_STACK if TPL 133 select SPL_DRIVERS_MISC_SUPPORT 134 imply SPL_SERIAL_SUPPORT 135 imply TPL_SERIAL_SUPPORT 136 select ROCKCHIP_BROM_HELPER 137 select TPL_LIBCOMMON_SUPPORT 138 select TPL_LIBGENERIC_SUPPORT 139 select GICV2 140 select ARM_SMCCC 141 help 142 The Rockchip RK3229 is a ARM-based SoC with a dual-core Cortex-A7 143 including NEON and GPU, Mali-400 graphics, several DDR3 options 144 and video codec support. Peripherals include Gigabit Ethernet, 145 USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. 146 147if ROCKCHIP_RK322X 148 149config ROCKCHIP_RK3128X 150 bool "Support Rockchip RK3128X " 151 help 152 RK3128X can use most code from RK322X, but at some situations we have 153 to distinguish between RK3128X and RK322X, so this macro gives help. 154 It is usually selected in RK3128X board defconfig. 155endif 156 157config ROCKCHIP_RK3288 158 bool "Support Rockchip RK3288" 159 select CPU_V7 160 select SPL_BOARD_INIT if SPL 161 select SUPPORT_SPL 162 select SUPPORT_TPL 163 select SPL 164 select TPL 165 select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL 166 select TPL_NEEDS_SEPARATE_STACK if TPL 167 imply TPL_SERIAL_SUPPORT 168 select GICV2 169 select ARM_SMCCC 170 select SPL_OPTEE 171 select FIT 172 select SPL_LOAD_FIT 173 select TPL_LIBCOMMON_SUPPORT 174 select TPL_LIBGENERIC_SUPPORT 175 select TPL_SYS_MALLOC_SIMPLE 176 select TPL_BOOTROM_SUPPORT 177 select TPL_DRIVERS_MISC_SUPPORT 178 select TPL_OF_CONTROL 179 select TPL_DM 180 select TPL_REGMAP 181 select TPL_SYSCON 182 select TPL_RAM 183 select TPL_CLK 184 select TPL_TINY_MEMSET 185 help 186 The Rockchip RK3288 is a ARM-based SoC with a quad-core Cortex-A17 187 including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two 188 video interfaces supporting HDMI and eDP, several DDR3 options 189 and video codec support. Peripherals include Gigabit Ethernet, 190 USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs. 191 192if ROCKCHIP_RK3288 193config SPL_FIT_GENERATOR 194 default "arch/arm/mach-rockchip/make_fit_optee.sh" 195 196config TPL_LDSCRIPT 197 default "arch/arm/mach-rockchip/u-boot-tpl.lds" 198 199config TPL_TEXT_BASE 200 default 0xff704000 201 202config TPL_MAX_SIZE 203 default 32768 204 205config TPL_STACK 206 default 0xff718000 207 208endif 209 210config ROCKCHIP_RK3308 211 bool "Support Rockchip RK3308" 212 select ARM64 if !ARM64_BOOT_AARCH32 213 select ARM_SMCCC 214 imply GICV2 215 select SUPPORT_SPL if !ARM64_BOOT_AARCH32 216 select SUPPORT_TPL if !ARM64_BOOT_AARCH32 217 select SPL if !ARM64_BOOT_AARCH32 218 select TPL if !ARM64_BOOT_AARCH32 219 imply SPL_CLK 220 imply SPL_REGMAP 221 imply SPL_SYSCON 222 imply SPL_RAM 223 imply SPL_SERIAL_SUPPORT 224 imply TPL_SERIAL_SUPPORT 225 imply SPL_SEPARATE_BSS 226 help 227 The Rockchip RK3308 is a ARM-based Soc which embeded with quad 228 Cortex-A35 and highly integrated audio interfaces. 229 230if ROCKCHIP_RK3308 231 232config TPL_LDSCRIPT 233 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 234 235config TPL_TEXT_BASE 236 default 0xfff81000 237 238config TPL_MAX_SIZE 239 default 10240 240 241config TPL_STACK 242 default 0xfff84000 243 244endif 245 246config ROCKCHIP_RK3328 247 bool "Support Rockchip RK3328" 248 select ARM64 249 select GICV2 250 select SUPPORT_SPL 251 select SUPPORT_TPL 252 select SPL 253 select TPL 254 select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL 255 select TPL_NEEDS_SEPARATE_STACK if TPL 256 imply SPL_SERIAL_SUPPORT 257 imply TPL_SERIAL_SUPPORT 258 imply SPL_SEPARATE_BSS 259 select ARM_SMCCC 260 help 261 The Rockchip RK3328 is a ARM-based SoC with a quad-core Cortex-A53. 262 including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two 263 video interfaces supporting HDMI and eDP, several DDR3 options 264 and video codec support. Peripherals include Gigabit Ethernet, 265 USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs. 266 267if ROCKCHIP_RK3328 268 269config TPL_LDSCRIPT 270 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 271 272config TPL_TEXT_BASE 273 default 0xff091000 274 275config TPL_MAX_SIZE 276 default 28672 277 278config TPL_STACK 279 default 0xff098000 280 281endif 282 283config ROCKCHIP_RK3368 284 bool "Support Rockchip RK3368" 285 select ARM64 286 select SUPPORT_SPL 287 select SUPPORT_TPL 288 select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL 289 select TPL_NEEDS_SEPARATE_STACK if TPL 290 imply SPL_SEPARATE_BSS 291 imply SPL_SERIAL_SUPPORT 292 imply TPL_SERIAL_SUPPORT 293 select GICV2 294 select ARM_SMCCC 295 help 296 The Rockchip RK3368 is a ARM-based SoC with a octa-core (organised 297 into a big and little cluster with 4 cores each) Cortex-A53 including 298 AdvSIMD, 512KB L2 cache (for the big cluster) and 256 KB L2 cache 299 (for the little cluster), PowerVR G6110 based graphics, one video 300 output processor supporting LVDS/HDMI/eDP, several DDR3 options and 301 video codec support. 302 303 On-chip peripherals include Gigabit Ethernet, USB2 host and OTG, SDIO, 304 I2S, UARTs, SPI, I2C and PWMs. 305 306if ROCKCHIP_RK3368 307 308config ROCKCHIP_PX5 309 bool "Support Rockchip PX5" 310 help 311 PX5 is a variant of RK3368, it shares codes with RK3368, but we still 312 need this macro to distinguish PX5 and RK3368. 313 314config TPL_LDSCRIPT 315 default "arch/arm/mach-rockchip/rk3368/u-boot-tpl.lds" 316 317config TPL_TEXT_BASE 318 default 0xff8c1000 319 320config TPL_MAX_SIZE 321 default 28672 322 323config TPL_STACK 324 default 0xff8cffff 325 326endif 327 328config ROCKCHIP_RK3399 329 bool "Support Rockchip RK3399" 330 select ARM64 331 select SUPPORT_SPL 332 select SUPPORT_TPL 333 select SPL 334 select TPL 335 select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL 336 select TPL_NEEDS_SEPARATE_STACK if TPL 337 imply TPL_SERIAL_SUPPORT 338 select SPL_SEPARATE_BSS 339 select SPL_SERIAL_SUPPORT 340 select SPL_DRIVERS_MISC_SUPPORT 341 select GICV3 342 select BOARD_LATE_INIT 343 select ROCKCHIP_BROM_HELPER 344 select ARM_SMCCC 345 select TPL_LIBCOMMON_SUPPORT 346 select TPL_LIBGENERIC_SUPPORT 347 select TPL_SYS_MALLOC_SIMPLE 348 select TPL_BOOTROM_SUPPORT 349 select TPL_DRIVERS_MISC_SUPPORT 350 select TPL_OF_CONTROL 351 select TPL_DM 352 select TPL_REGMAP 353 select TPL_SYSCON 354 select TPL_RAM 355 select TPL_CLK 356 select TPL_TINY_MEMSET 357 help 358 The Rockchip RK3399 is a ARM-based SoC with a dual-core Cortex-A72 359 and quad-core Cortex-A53. 360 including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two 361 video interfaces supporting HDMI and eDP, several DDR3 options 362 and video codec support. Peripherals include Gigabit Ethernet, 363 USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs. 364 365if ROCKCHIP_RK3399 366 367config ROCKCHIP_RK3399PRO 368 bool "Support Rockchip RK3399Pro" 369 370config TPL_LDSCRIPT 371 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 372 373config TPL_TEXT_BASE 374 default 0xff8c2000 375 376config TPL_MAX_SIZE 377 default 188416 378 379config TPL_STACK 380 default 0xff8effff 381 382endif 383 384config ROCKCHIP_RK3568 385 bool "Support Rockchip RK3568" 386 select ARM64 if !ARM64_BOOT_AARCH32 387 select ARM_SMCCC 388 select GICV3 if !ARM64_BOOT_AARCH32 && !SUPPORT_USBPLUG 389 select SUPPORT_TPL if !ARM64_BOOT_AARCH32 390 select SUPPORT_SPL if !ARM64_BOOT_AARCH32 391 select TPL_TINY_FRAMEWORK if TPL 392 select DEBUG_UART_BOARD_INIT 393 imply TPL if !ARM64_BOOT_AARCH32 394 imply SPL if !ARM64_BOOT_AARCH32 395 imply TPL_SERIAL_SUPPORT 396 help 397 The Rockchip RK3568 is a ARM-based SoC with a quad-core Cortex-A55. 398 399if ROCKCHIP_RK3568 400 401config TPL_LDSCRIPT 402 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 403 404config TPL_TEXT_BASE 405 default 0xfdcc1000 406 407config TPL_MAX_SIZE 408 default 61440 409 410endif 411 412config ROCKCHIP_RK3588 413 bool "Support Rockchip RK3588" 414 select ARM64 if !ARM64_BOOT_AARCH32 415 select ARM_SMCCC 416 select DEBUG_UART_BOARD_INIT 417 select GICV3 if !ARM64_BOOT_AARCH32 && !SUPPORT_USBPLUG 418 select ROCKCHIP_BROM_HELPER 419 select SUPPORT_SPL if !ARM64_BOOT_AARCH32 420 select SUPPORT_TPL if !ARM64_BOOT_AARCH32 421 select TPL_TINY_FRAMEWORK if TPL 422 imply TPL if !ARM64_BOOT_AARCH32 423 imply SPL if !ARM64_BOOT_AARCH32 424 imply TPL_SERIAL_SUPPORT 425 select DEBUG_UART_BOARD_INIT 426 help 427 The Rockchip RK3588 is a ARM-based SoC with a quad-core Cortex-A55. 428 429if ROCKCHIP_RK3588 430 431config TPL_LDSCRIPT 432 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 433 434config TPL_TEXT_BASE 435 default 0xfdcc1000 436 437config TPL_MAX_SIZE 438 default 61440 439endif 440 441config ROCKCHIP_RK1808 442 bool "Support Rockchip RK1808" 443 select ARM64 444 select ARM_SMCCC 445 select GICV3 if !COPROCESSOR_RK1808 446 select SUPPORT_SPL if !COPROCESSOR_RK1808 447 select SUPPORT_TPL if !COPROCESSOR_RK1808 448 help 449 The Rockchip RK1808 is a ARM-based Soc which embedded with dual 450 Cortex-A35. 451 452if ROCKCHIP_RK1808 453 454config ROCKCHIP_RK1806 455 bool "Support Rockchip RK1806" 456 help 457 The Rockchip RK1806 is a ARM-based Soc which embedded with dual 458 Cortex-A35. 459 460config COPROCESSOR_RK1808 461 bool "RK1808 coprocessor" 462 help 463 This indicates the RK1808 is working as a coprocessor for another 464 more powerful SoC. 465 466endif 467 468config ROCKCHIP_RV1106 469 bool "Support Rockchip RV1106" 470 select CPU_V7 471 select DEBUG_UART_BOARD_INIT 472 imply SUPPORT_SPL 473 imply SUPPORT_TPL 474 imply SPL 475 imply TPL 476 imply TPL_SERIAL_SUPPORT 477 imply TPL_TINY_FRAMEWORK if TPL 478 imply BOARD_LATE_INIT 479 imply ROCKCHIP_GPIO_V2 480 help 481 The Rockchip RV1106 is a ARM-based SoC with a Cortex-A7 and 482 other modules. 483 484if ROCKCHIP_RV1106 485 486config TPL_LDSCRIPT 487 default "arch/arm/mach-rockchip/u-boot-tpl.lds" 488 489config TPL_TEXT_BASE 490 default 0xff701000 491 492config TPL_MAX_SIZE 493 default 32768 494endif 495 496config ROCKCHIP_RV1108 497 bool "Support Rockchip RV1108" 498 select CPU_V7 499 select SUPPORT_SPL 500 select SUPPORT_TPL 501 select SPL 502 select TPL 503 select BOARD_LATE_INIT 504 help 505 The Rockchip RV1108 is a ARM-based SoC with a single-core Cortex-A7 506 and a DSP. 507 508if ROCKCHIP_RV1108 509 510config TPL_LDSCRIPT 511 default "arch/arm/mach-rockchip/u-boot-tpl.lds" 512 513config TPL_TEXT_BASE 514 default 0x10080800 515 516config TPL_MAX_SIZE 517 default 6144 518 519config TPL_STACK 520 default 0x10082000 521 522endif 523 524config ROCKCHIP_RV1126 525 bool "Support Rockchip RV1126" 526 select CPU_V7 527 imply SUPPORT_TPL 528 imply SUPPORT_SPL 529 imply TPL_TINY_FRAMEWORK if TPL 530 select DEBUG_UART_BOARD_INIT 531 imply TPL 532 imply SPL 533 imply GICV2 534 imply ARM_SMCCC 535 imply BOARD_LATE_INIT 536 imply ROCKCHIP_GPIO_V2 537 imply TPL_SERIAL_SUPPORT 538 help 539 The Rockchip RV1126 is a ARM-based SoC with a quad-core Cortex-A7 540 and a risc-v core. 541 542if ROCKCHIP_RV1126 543 544config TPL_LDSCRIPT 545 default "arch/arm/mach-rockchip/u-boot-tpl.lds" 546 547config TPL_TEXT_BASE 548 default 0xff701000 549 550config TPL_MAX_SIZE 551 default 32768 552endif 553 554config SPL_ROCKCHIP_BACK_TO_BROM 555 bool "SPL returns to bootrom" 556 default y if ROCKCHIP_RK3036 557 select ROCKCHIP_BROM_HELPER 558 depends on SPL 559 help 560 Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled, 561 SPL will return to the boot rom, which will then load the U-Boot 562 binary to keep going on. 563 564config TPL_ROCKCHIP_BACK_TO_BROM 565 bool "TPL returns to bootrom" 566 default y 567 select ROCKCHIP_BROM_HELPER 568 depends on TPL 569 help 570 Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled, 571 SPL will return to the boot rom, which will then load the U-Boot 572 binary to keep going on. 573 574config ARM64_BOOT_AARCH32 575 bool "Support Boot an ARM64 on AArch32 execution state, ie. U-Boot is in AArch32" 576 select CPU_V7 577 default n 578 help 579 If you want to boot an ARM64 processor on 32-bit mode, say y here. 580 581config ARM64_SWITCH_TO_AARCH32 582 bool "Support AArch64 U-Boot boot AArch32 kernel" 583 default n 584 help 585 If you want AArch64 U-Boot to boot AArch32 kernel, say y here. 586 This feature needs ATF to help switch the PE state. 587 588config ROCKCHIP_BOOT_MODE_REG 589 hex "Rockchip boot mode flag register address" 590 default 0xff010200 if ROCKCHIP_PX30 591 default 0x200081c8 if ROCKCHIP_RK3036 592 default 0x100a0038 if ROCKCHIP_RK3128 593 default 0x20004040 if ROCKCHIP_RK3188 594 default 0x110005c8 if ROCKCHIP_RK322X 595 default 0xff730094 if ROCKCHIP_RK3288 596 default 0xff000500 if ROCKCHIP_RK3308 597 default 0xff1005c8 if ROCKCHIP_RK3328 598 default 0xff738200 if ROCKCHIP_RK3368 599 default 0xff320300 if ROCKCHIP_RK3399 600 default 0xfdc20200 if ROCKCHIP_RK3568 601 default 0xfd588080 if ROCKCHIP_RK3588 602 default 0xfe020200 if ROCKCHIP_RK1808 603 default 0xff020200 if ROCKCHIP_RV1106 604 default 0x10300580 if ROCKCHIP_RV1108 605 default 0xfe020200 if ROCKCHIP_RV1126 606 default 0 607 help 608 The Soc will enter to different boot mode(defined in asm/arch/boot_mode.h) 609 according to the value from this register. 610 611config ROCKCHIP_STIMER_BASE 612 hex "Rockchip Secure timer base address" 613 default 0xff220020 if ROCKCHIP_PX30 614 default 0x200440a0 if ROCKCHIP_RK3036 615 default 0x2000e000 if ROCKCHIP_RK3066 616 default 0x20018020 if ROCKCHIP_RK3126 617 default 0x200440a0 if ROCKCHIP_RK3128 618 default 0x2000e000 if ROCKCHIP_RK3188 619 default 0x110d0020 if ROCKCHIP_RK322X 620 default 0xff810020 if ROCKCHIP_RK3288 621 default 0xff1b00a0 if ROCKCHIP_RK3308 622 default 0xff1d0020 if ROCKCHIP_RK3328 623 default 0xff830020 if ROCKCHIP_RK3368 624 default 0xff8680a0 if ROCKCHIP_RK3399 625 default 0xfdd1c020 if ROCKCHIP_RK3568 626 default 0xfd8c8000 if ROCKCHIP_RK3588 627 default 0xff590020 if ROCKCHIP_RV1106 628 default 0x10350020 if ROCKCHIP_RV1108 629 default 0xff670020 if ROCKCHIP_RV1126 630 default 0 631 help 632 The secure timer inited in SPL/TPL in secure word, ARM generic timer 633 works after this timer work. 634 635config ROCKCHIP_IRAM_START_ADDR 636 hex "Rockchip Secure timer base address" 637 default 0xff0e0000 if ROCKCHIP_PX30 638 default 0x10080000 if ROCKCHIP_RK3036 639 default 0x10080000 if ROCKCHIP_RK3128 640 default 0x10080000 if ROCKCHIP_RK3188 641 default 0x10080000 if ROCKCHIP_RK322X 642 default 0xff700000 if ROCKCHIP_RK3288 643 default 0xfff80000 if ROCKCHIP_RK3308 644 default 0xff091000 if ROCKCHIP_RK3328 645 default 0xff8c0000 if ROCKCHIP_RK3368 646 default 0xff8c0000 if ROCKCHIP_RK3399 647 default 0xfdcc0000 if ROCKCHIP_RK3568 648 default 0xff000000 if ROCKCHIP_RK3588 649 default 0xff6c0000 if ROCKCHIP_RV1106 650 default 0x10080000 if ROCKCHIP_RV1108 651 default 0xff700000 if ROCKCHIP_RV1126 652 default 0 653 help 654 The IRAM start addr is to locate variant of the boot device from 655 bootrom. 656 657config ROCKCHIP_SPL_RESERVE_IRAM 658 hex "Size of IRAM reserved in SPL" 659 default 0 660 help 661 SPL may need reserve memory for firmware loaded by SPL, whose load 662 address is in IRAM and may overlay with SPL text area if not 663 reserved. 664 665config ROCKCHIP_BROM_HELPER 666 bool 667 668config SPL_ROCKCHIP_EARLYRETURN_TO_BROM 669 bool "SPL requires early-return (for RK3188-style BROM) to BROM" 670 depends on SPL && ENABLE_ARM_SOC_BOOT0_HOOK 671 help 672 Some Rockchip BROM variants (e.g. on the RK3188) load the 673 first stage in segments and enter multiple times. E.g. on 674 the RK3188, the first 1KB of the first stage are loaded 675 first and entered; after returning to the BROM, the 676 remainder of the first stage is loaded, but the BROM 677 re-enters at the same address/to the same code as previously. 678 679 This enables support code in the BOOT0 hook for the SPL stage 680 to allow multiple entries. 681 682config TPL_ROCKCHIP_EARLYRETURN_TO_BROM 683 bool "TPL requires early-return (for RK3188-style BROM) to BROM" 684 depends on TPL && ENABLE_ARM_SOC_BOOT0_HOOK 685 help 686 Some Rockchip BROM variants (e.g. on the RK3188) load the 687 first stage in segments and enter multiple times. E.g. on 688 the RK3188, the first 1KB of the first stage are loaded 689 first and entered; after returning to the BROM, the 690 remainder of the first stage is loaded, but the BROM 691 re-enters at the same address/to the same code as previously. 692 693 This enables support code in the BOOT0 hook for the TPL stage 694 to allow multiple entries. 695 696config SPL_MMC_SUPPORT 697 default y if !SPL_ROCKCHIP_BACK_TO_BROM && MMC 698 699config RKIMG_BOOTLOADER 700 bool "Support for Rockchip platform features" 701 default y 702 help 703 Actually this is a compatible configure for code compilation. 704 705config RKIMG_ANDROID_BOOTMODE_LEGACY 706 bool "Support set androidboot.mode with legacy rule" 707 depends on RKIMG_BOOTLOADER 708 default n 709 help 710 Rockchip set "androidboot.mode=" as "charger" or boot media for android, 711 which is a rockchip private solution(SDK < 8.1) and deprecated. 712 713config ROCKCHIP_BOOTDEV 714 string "Set the boot device for multiple storage board" 715 default "" 716 help 717 On the multiple storage on board, set this to determine what we really 718 want to be the boot device, which contains kernel, rootfs and etc. 719 Fall through to get from preloader or scan list when it's NULL. 720 721config ROCKCHIP_RESOURCE_IMAGE 722 bool "Enable support for rockchip resource image" 723 depends on RKIMG_BOOTLOADER 724 default y 725 help 726 This enables support to get dtb or logo files from 727 rockchip resource image format partition. 728 729config ROCKCHIP_DTB_VERIFY 730 bool "Enable hash verify for DTB in the resource file" 731 depends on ROCKCHIP_RESOURCE_IMAGE 732 select SHA1 if !DM_CRYPTO 733 select SHA256 if !DM_CRYPTO 734 default y 735 help 736 This enables the hash verify for DTB in the resource file, it means we 737 always read DTB from second position even the DTB position is present. 738 739config ROCKCHIP_USB_BOOT 740 bool "Enable support for rockchip U-disk boot" 741 depends on USB 742 default n 743 help 744 This enables support for rockchip U-disk boot. 745 746config ROCKCHIP_FIT_IMAGE 747 bool "Enable support for FIT image" 748 depends on FIT 749 select CMD_BOOT_FIT 750 default n 751 help 752 This enables loading dtb from fit image. 753 754config ROCKCHIP_UIMAGE 755 bool "Enable support for legacy uImage" 756 depends on !FIT_SIGNATURE && USING_KERNEL_DTB 757 select CMD_BOOT_UIMAGE 758 default n 759 help 760 This enables loading dtb from uImage image. 761 762config ROCKCHIP_EARLY_DISTRO_DTB 763 bool "Enable support for distro dtb early" 764 depends on DISTRO_DEFAULTS && USING_KERNEL_DTB && CMD_FS_GENERIC 765 default n 766 help 767 This enables loading dtb from distro bootable partition when there 768 is no valid dtb in android boot.img and rockchip resource.img. 769 770if ROCKCHIP_EARLY_DISTRO_DTB 771 772config ROCKCHIP_EARLY_DISTRO_DTB_PATH 773 string "/rk-kernel.dtb" 774 help 775 "DTB file path in the bootable partition image" 776endif 777 778config ROCKCHIP_HWID_DTB 779 bool "Enable support for selecting DTB by hardware id" 780 depends on ROCKCHIP_RESOURCE_IMAGE 781 default n 782 help 783 This enables select the expected DTB from sets by hardware id, 784 i.e. GPIO or ADC value. 785 786config ROCKCHIP_VENDOR_PARTITION 787 bool "Rockchip vendor storage partition support" 788 depends on RKIMG_BOOTLOADER 789 help 790 This enable support to read/write vendor configuration data from/to 791 this partition. 792 793config USING_KERNEL_DTB 794 bool "Using dtb from Kernel/resource for U-Boot" 795 depends on RKIMG_BOOTLOADER && OF_LIVE 796 default y 797 help 798 This enable support to read dtb from resource and use it for U-Boot, 799 the uart and emmc will still using U-Boot dtb, but other devices like 800 regulator/pmic, display, usb will use dts node from kernel. 801 802config USING_KERNEL_DTB_V2 803 bool "Version 2 of kernel dtb mechanism" 804 depends on USING_KERNEL_DTB 805 default n 806 help 807 The V2 mechanism: 808 - both of U-Boot and kernel's *ALL* devices are exist in dm tree. 809 - put the necessary U-Boot devices in the head of device uclass list. 810 - the both existence policy don't require phandle fixup any more. 811 - it is for the next generation(rk3588 ...) or necessary platforms. 812 The V1 mechanism(legacy): 813 - U-Boot: only some necessary U-Boot devices(storage, crypto...) in dm tree. 814 - kernel: all the devices(except the U-Boot only) in dm tree. 815 816config EMBED_KERNEL_DTB_PATH 817 string "Embeded kernel dtb file path" 818 depends on USING_KERNEL_DTB 819 default "dts/kern.dtb" 820 help 821 This file will auto be appended to the u-boot.bin. 822 823config EMBED_KERNEL_DTB_ALWAYS 824 bool "Always using embed kernel dtb" 825 depends on USING_KERNEL_DTB 826 default n 827 help 828 Allow fallback to always use a prepared kernel dtb even USING_KERNEL_DTB 829 is set. This makes U-Boot stage more stable but not flexible any more to 830 compatible different boards. 831 832config ROCKCHIP_CRC 833 bool "Rockchip CRC verify images" 834 help 835 This enable support Rockchip CRC verify images. It takes a lot of time, 836 so it is better only used for debug. 837 838config ROCKCHIP_SMCCC 839 bool "Rockchip SMCCC" 840 default y if ARM_SMCCC 841 help 842 This enable support for Rockchip SMC calls 843 844config ROCKCHIP_DEBUGGER 845 bool "Rockchip debugger" 846 depends on IRQ 847 help 848 This enable support for Rockchip debugger. Now we install a timer interrupt 849 and dump pt_regs when the timeout event trigger. This helps us to know cpu 850 state when system hang. 851 852config ROCKCHIP_CRASH_DUMP 853 bool "Rockchip crash dump registers" 854 help 855 This enable dump registers when system crash, the registers you would like 856 to dump can be added in show_regs(). 857 858config ROCKCHIP_PRELOADER_ATAGS 859 bool "Rockchip pre-loader atags" 860 default y if ARCH_ROCKCHIP 861 help 862 This enable support Rockchip atags among pre-loaders, i.e. ddr, miniloader, ATF, 863 tos, U-Boot, etc. It delivers boot and configure information, shared with pre-loaders 864 and finally ends with U-Boot. 865 866config ROCKCHIP_META 867 bool "Rockchip Meta" 868 depends on SPL_KERNEL_BOOT && SPL_LIBDISK_SUPPORT 869 help 870 This support to load Rockchip meta data which like isp parameter, peripheral 871 parameters, etc. 872 873config ROCKCHIP_PRELOADER_SERIAL 874 bool "Rockchip pre-loader serial" 875 default y if ROCKCHIP_PRELOADER_ATAGS 876 help 877 This enable U-Boot using pre-loader atags serial configure to initialize console. 878 It denpends on serial aliases to find pre-loader serial number. 879 880config ROCKCHIP_IMAGE_TINY 881 bool "Rockchip tiny Image generation" 882 default n 883 help 884 This enable tiny image generation 885 886config ROCKCHIP_FIT_IMAGE_PACK 887 bool "Rockchip fit image pack of U-Boot and TEE" 888 depends on ROCKCHIP_FIT_IMAGE 889 default n 890 help 891 This enable fit image pack of U-Boot and TEE, it's used for make.sh script. 892 893config ROCKCHIP_UART_MUX_SEL_M 894 int "UART mux select" 895 default 0 896 depends on TPL 897 help 898 This select uart multiplexer for debug uart iomux in board_debug_uart_init. 899 900config ROCKCHIP_REBOOT_TEST 901 bool "Rockchip reboot stress test before kernel" 902 default n 903 help 904 It's a reboot stress test before kernel stages. 905 906config ROCKCHIP_NEW_IDB 907 bool "Rockchip new IDB header" 908 default n 909 help 910 The new IDB header was introduced from RK356X. 911 912config GICV2 913 bool "ARM GICv2" 914 915config GICV3 916 bool "ARM GICv3" 917 918config ROCKCHIP_EMMC_IOMUX 919 bool "ROCKCHIP EMMC IOMUX" 920 default n 921 help 922 This enable U-Boot to config EMMC iomux. 923 924config ROCKCHIP_NAND_IOMUX 925 bool "ROCKCHIP NAND IOMUX" 926 default n 927 help 928 This enable U-Boot to config NAND iomux. 929 930config ROCKCHIP_SFC_IOMUX 931 bool "ROCKCHIP SFC IOMUX" 932 default n 933 help 934 This enable U-Boot to config SFC iomux. 935 936config ROCKCHIP_SET_SN 937 bool "Rockchip set serial number" 938 default y 939 940config ROCKCHIP_SET_ETHADDR 941 bool "Rockchip set eth address" 942 default y 943 944config BASE_DEFCONFIG 945 string "Base defconfig of config fragment" 946 default "" 947 help 948 Indicate the base defconfig of config fragment. 949 950config CHIP_NAME 951 string "Chip label name" 952 default "" 953 954config LOADER_INI 955 string "Name of Loader ini file in rkbin repository" 956 default "" 957 help 958 The ini file is used to pack loader image. 959 960config TRUST_INI 961 string "Name of Trust ini file in rkbin repository" 962 default "" 963 help 964 The ini file is used to pack trust image. 965 966if !ROCKCHIP_FIT_IMAGE_PACK 967config UBOOT_SIZE_KB 968 int "Per u-boot.bin Image size, unit: KB" 969 default 1024 970 971config UBOOT_NUM 972 int "Number of u-boot.bin image being packed into trust.img" 973 default 4 974 975config TRUST_SIZE_KB 976 int "Per trust Image size, unit: KB" 977 default 2048 978 979config TRUST_NUM 980 int "Number of trust image being packed into trust.img" 981 default 2 982 983config TRUST_RSA_MODE 984 int "RSA mode of trust.img on ARM64" 985 default 2 986 help 987 The RSA mode for tools to pack, the mode id can be: 988 0: none; 1: RSA-1024; 2: RSA-2048; 3: RSA-2048-pss. 989 990config TRUST_SHA_MODE 991 int "SHA mode of trust.img on ARM64" 992 default 3 993 help 994 The SHA mode for tools to pack, the mode id can be: 995 0: none; 1: sha1; 2: sha256 RK big endian; 3: sha256 little endian. 996endif 997 998source "arch/arm/mach-rockchip/px30/Kconfig" 999source "arch/arm/mach-rockchip/rk3036/Kconfig" 1000source "arch/arm/mach-rockchip/rk3066/Kconfig" 1001source "arch/arm/mach-rockchip/rk3128/Kconfig" 1002source "arch/arm/mach-rockchip/rk3188/Kconfig" 1003source "arch/arm/mach-rockchip/rk322x/Kconfig" 1004source "arch/arm/mach-rockchip/rk3288/Kconfig" 1005source "arch/arm/mach-rockchip/rk3308/Kconfig" 1006source "arch/arm/mach-rockchip/rk3328/Kconfig" 1007source "arch/arm/mach-rockchip/rk3368/Kconfig" 1008source "arch/arm/mach-rockchip/rk3399/Kconfig" 1009source "arch/arm/mach-rockchip/rk3568/Kconfig" 1010source "arch/arm/mach-rockchip/rk3588/Kconfig" 1011source "arch/arm/mach-rockchip/rk1808/Kconfig" 1012source "arch/arm/mach-rockchip/rv1106/Kconfig" 1013source "arch/arm/mach-rockchip/rv1108/Kconfig" 1014source "arch/arm/mach-rockchip/rv1126/Kconfig" 1015 1016endif 1017