xref: /rk3399_rockchip-uboot/Makefile (revision 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8) 
1#
2# (C) Copyright 2000-2008
3# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4#
5# See file CREDITS for list of people who contributed to this
6# project.
7#
8# This program is free software; you can redistribute it and/or
9# modify it under the terms of the GNU General Public License as
10# published by the Free Software Foundatio; either version 2 of
11# the License, or (at your option) any later version.
12#
13# This program is distributed in the hope that it will be useful,
14# but WITHOUT ANY WARRANTY; without even the implied warranty of
15# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16# GNU General Public License for more details.
17#
18# You should have received a copy of the GNU General Public License
19# along with this program; if not, write to the Free Software
20# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21# MA 02111-1307 USA
22#
23
24VERSION = 1
25PATCHLEVEL = 3
26SUBLEVEL = 2
27EXTRAVERSION = -rc3
28U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
29VERSION_FILE = $(obj)include/version_autogenerated.h
30
31HOSTARCH := $(shell uname -m | \
32	sed -e s/i.86/i386/ \
33	    -e s/sun4u/sparc64/ \
34	    -e s/arm.*/arm/ \
35	    -e s/sa110/arm/ \
36	    -e s/powerpc/ppc/ \
37	    -e s/ppc64/ppc/ \
38	    -e s/macppc/ppc/)
39
40HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
41	    sed -e 's/\(cygwin\).*/cygwin/')
42
43export	HOSTARCH HOSTOS
44
45# Deal with colliding definitions from tcsh etc.
46VENDOR=
47
48#########################################################################
49# Allow for silent builds
50ifeq (,$(findstring s,$(MAKEFLAGS)))
51XECHO = echo
52else
53XECHO = :
54endif
55
56#########################################################################
57#
58# U-boot build supports producing a object files to the separate external
59# directory. Two use cases are supported:
60#
61# 1) Add O= to the make command line
62# 'make O=/tmp/build all'
63#
64# 2) Set environement variable BUILD_DIR to point to the desired location
65# 'export BUILD_DIR=/tmp/build'
66# 'make'
67#
68# The second approach can also be used with a MAKEALL script
69# 'export BUILD_DIR=/tmp/build'
70# './MAKEALL'
71#
72# Command line 'O=' setting overrides BUILD_DIR environent variable.
73#
74# When none of the above methods is used the local build is performed and
75# the object files are placed in the source directory.
76#
77
78ifdef O
79ifeq ("$(origin O)", "command line")
80BUILD_DIR := $(O)
81endif
82endif
83
84ifneq ($(BUILD_DIR),)
85saved-output := $(BUILD_DIR)
86
87# Attempt to create a output directory.
88$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
89
90# Verify if it was successful.
91BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
92$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
93endif # ifneq ($(BUILD_DIR),)
94
95OBJTREE		:= $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
96SRCTREE		:= $(CURDIR)
97TOPDIR		:= $(SRCTREE)
98LNDIR		:= $(OBJTREE)
99export	TOPDIR SRCTREE OBJTREE
100
101MKCONFIG	:= $(SRCTREE)/mkconfig
102export MKCONFIG
103
104ifneq ($(OBJTREE),$(SRCTREE))
105REMOTE_BUILD	:= 1
106export REMOTE_BUILD
107endif
108
109# $(obj) and (src) are defined in config.mk but here in main Makefile
110# we also need them before config.mk is included which is the case for
111# some targets like unconfig, clean, clobber, distclean, etc.
112ifneq ($(OBJTREE),$(SRCTREE))
113obj := $(OBJTREE)/
114src := $(SRCTREE)/
115else
116obj :=
117src :=
118endif
119export obj src
120
121# Make sure CDPATH settings don't interfere
122unexport CDPATH
123
124#########################################################################
125
126ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
127
128# load ARCH, BOARD, and CPU configuration
129include $(obj)include/config.mk
130export	ARCH CPU BOARD VENDOR SOC
131
132ifndef CROSS_COMPILE
133ifeq ($(HOSTARCH),$(ARCH))
134CROSS_COMPILE =
135else
136ifeq ($(ARCH),ppc)
137CROSS_COMPILE = ppc_8xx-
138endif
139ifeq ($(ARCH),arm)
140CROSS_COMPILE = arm-linux-
141endif
142ifeq ($(ARCH),i386)
143CROSS_COMPILE = i386-linux-
144endif
145ifeq ($(ARCH),mips)
146CROSS_COMPILE = mips_4KC-
147endif
148ifeq ($(ARCH),nios)
149CROSS_COMPILE = nios-elf-
150endif
151ifeq ($(ARCH),nios2)
152CROSS_COMPILE = nios2-elf-
153endif
154ifeq ($(ARCH),m68k)
155CROSS_COMPILE = m68k-elf-
156endif
157ifeq ($(ARCH),microblaze)
158CROSS_COMPILE = mb-
159endif
160ifeq ($(ARCH),blackfin)
161CROSS_COMPILE = bfin-uclinux-
162endif
163ifeq ($(ARCH),avr32)
164CROSS_COMPILE = avr32-linux-
165endif
166ifeq ($(ARCH),sh)
167CROSS_COMPILE = sh4-linux-
168endif	# sh
169endif	# HOSTARCH,ARCH
170endif	# CROSS_COMPILE
171
172export	CROSS_COMPILE
173
174# load other configuration
175include $(TOPDIR)/config.mk
176
177#########################################################################
178# U-Boot objects....order is important (i.e. start must be first)
179
180OBJS  = cpu/$(CPU)/start.o
181ifeq ($(CPU),i386)
182OBJS += cpu/$(CPU)/start16.o
183OBJS += cpu/$(CPU)/reset.o
184endif
185ifeq ($(CPU),ppc4xx)
186OBJS += cpu/$(CPU)/resetvec.o
187endif
188ifeq ($(CPU),mpc85xx)
189OBJS += cpu/$(CPU)/resetvec.o
190endif
191
192OBJS := $(addprefix $(obj),$(OBJS))
193
194LIBS  = lib_generic/libgeneric.a
195LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
196	"board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
197LIBS += board/$(BOARDDIR)/lib$(BOARD).a
198LIBS += cpu/$(CPU)/lib$(CPU).a
199ifdef SOC
200LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
201endif
202ifeq ($(CPU),ixp)
203LIBS += cpu/ixp/npe/libnpe.a
204endif
205LIBS += lib_$(ARCH)/lib$(ARCH).a
206LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
207	fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
208LIBS += net/libnet.a
209LIBS += disk/libdisk.a
210LIBS += drivers/bios_emulator/libatibiosemu.a
211LIBS += drivers/block/libblock.a
212LIBS += drivers/dma/libdma.a
213LIBS += drivers/hwmon/libhwmon.a
214LIBS += drivers/i2c/libi2c.a
215LIBS += drivers/input/libinput.a
216LIBS += drivers/misc/libmisc.a
217LIBS += drivers/mtd/libmtd.a
218LIBS += drivers/mtd/nand/libnand.a
219LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
220LIBS += drivers/mtd/onenand/libonenand.a
221LIBS += drivers/net/libnet.a
222LIBS += drivers/net/sk98lin/libsk98lin.a
223LIBS += drivers/pci/libpci.a
224LIBS += drivers/pcmcia/libpcmcia.a
225LIBS += drivers/spi/libspi.a
226ifeq ($(CPU),mpc83xx)
227LIBS += drivers/qe/qe.a
228endif
229ifeq ($(CPU),mpc85xx)
230LIBS += drivers/qe/qe.a
231endif
232LIBS += drivers/rtc/librtc.a
233LIBS += drivers/serial/libserial.a
234LIBS += drivers/usb/libusb.a
235LIBS += drivers/video/libvideo.a
236LIBS += post/libpost.a post/drivers/libpostdrivers.a
237LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \
238	"post/lib_$(ARCH)/libpost$(ARCH).a"; fi)
239LIBS += $(shell if [ -d post/lib_$(ARCH)/fpu ]; then echo \
240	"post/lib_$(ARCH)/fpu/libpost$(ARCH)fpu.a"; fi)
241LIBS += $(shell if [ -d post/cpu/$(CPU) ]; then echo \
242	"post/cpu/$(CPU)/libpost$(CPU).a"; fi)
243LIBS += $(shell if [ -d post/board/$(BOARDDIR) ]; then echo \
244	"post/board/$(BOARDDIR)/libpost$(BOARD).a"; fi)
245LIBS += common/libcommon.a
246LIBS += libfdt/libfdt.a
247LIBS += api/libapi.a
248
249LIBS := $(addprefix $(obj),$(LIBS))
250.PHONY : $(LIBS) $(VERSION_FILE)
251
252# Add GCC lib
253PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
254
255# The "tools" are needed early, so put this first
256# Don't include stuff already done in $(LIBS)
257SUBDIRS	= tools \
258	  examples \
259	  api_examples
260
261.PHONY : $(SUBDIRS)
262
263ifeq ($(CONFIG_NAND_U_BOOT),y)
264NAND_SPL = nand_spl
265U_BOOT_NAND = $(obj)u-boot-nand.bin
266endif
267
268ifeq ($(CONFIG_ONENAND_U_BOOT),y)
269ONENAND_IPL = onenand_ipl
270U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
271endif
272
273__OBJS := $(subst $(obj),,$(OBJS))
274__LIBS := $(subst $(obj),,$(LIBS))
275
276#########################################################################
277#########################################################################
278
279ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND)
280ifeq ($(ARCH),blackfin)
281ALL += $(obj)u-boot.ldr
282endif
283
284all:		$(ALL)
285
286$(obj)u-boot.hex:	$(obj)u-boot
287		$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
288
289$(obj)u-boot.srec:	$(obj)u-boot
290		$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
291
292$(obj)u-boot.bin:	$(obj)u-boot
293		$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
294
295$(obj)u-boot.ldr:	$(obj)u-boot
296		$(LDR) -T $(CONFIG_BFIN_CPU) -f -c $@ $< $(LDR_FLAGS)
297
298$(obj)u-boot.ldr.hex:	$(obj)u-boot.ldr
299		$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
300
301$(obj)u-boot.ldr.srec:	$(obj)u-boot.ldr
302		$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
303
304$(obj)u-boot.img:	$(obj)u-boot.bin
305		./tools/mkimage -A $(ARCH) -T firmware -C none \
306		-a $(TEXT_BASE) -e 0 \
307		-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
308			sed -e 's/"[	 ]*$$/ for $(BOARD) board"/') \
309		-d $< $@
310
311$(obj)u-boot.sha1:	$(obj)u-boot.bin
312		$(obj)tools/ubsha1 $(obj)u-boot.bin
313
314$(obj)u-boot.dis:	$(obj)u-boot
315		$(OBJDUMP) -d $< > $@
316
317$(obj)u-boot:		depend $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
318		UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
319		cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
320			--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
321			-Map u-boot.map -o u-boot
322
323$(OBJS):	depend $(obj)include/autoconf.mk
324		$(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
325
326$(LIBS):	depend $(obj)include/autoconf.mk
327		$(MAKE) -C $(dir $(subst $(obj),,$@))
328
329$(SUBDIRS):	depend $(obj)include/autoconf.mk
330		$(MAKE) -C $@ all
331
332$(LDSCRIPT):	depend $(obj)include/autoconf.mk
333		$(MAKE) -C $(dir $@) $(notdir $@)
334
335$(NAND_SPL):	$(VERSION_FILE)	$(obj)include/autoconf.mk
336		$(MAKE) -C nand_spl/board/$(BOARDDIR) all
337
338$(U_BOOT_NAND):	$(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
339		cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
340
341$(ONENAND_IPL):	$(VERSION_FILE)	$(obj)include/autoconf.mk
342		$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
343
344$(U_BOOT_ONENAND):	$(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
345		cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
346
347$(VERSION_FILE):
348		@( echo -n "#define U_BOOT_VERSION \"U-Boot " ; \
349		echo -n "$(U_BOOT_VERSION)" ; \
350		echo -n $(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion \
351			 $(TOPDIR)) ; \
352		echo "\"" ) > $@.tmp
353		@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
354
355gdbtools:
356		$(MAKE) -C tools/gdb all || exit 1
357
358updater:
359		$(MAKE) -C tools/updater all || exit 1
360
361env:
362		$(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
363
364depend dep:	$(VERSION_FILE)
365		for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
366
367TAG_SUBDIRS += include
368TAG_SUBDIRS += lib_generic board/$(BOARDDIR)
369TAG_SUBDIRS += cpu/$(CPU)
370TAG_SUBDIRS += lib_$(ARCH)
371TAG_SUBDIRS += fs/cramfs
372TAG_SUBDIRS += fs/fat
373TAG_SUBDIRS += fs/fdos
374TAG_SUBDIRS += fs/jffs2
375TAG_SUBDIRS += net
376TAG_SUBDIRS += disk
377TAG_SUBDIRS += common
378TAG_SUBDIRS += drivers/bios_emulator
379TAG_SUBDIRS += drivers/block
380TAG_SUBDIRS += drivers/hwmon
381TAG_SUBDIRS += drivers/i2c
382TAG_SUBDIRS += drivers/input
383TAG_SUBDIRS += drivers/misc
384TAG_SUBDIRS += drivers/mtd
385TAG_SUBDIRS += drivers/mtd/nand
386TAG_SUBDIRS += drivers/mtd/nand_legacy
387TAG_SUBDIRS += drivers/mtd/onenand
388TAG_SUBDIRS += drivers/net
389TAG_SUBDIRS += drivers/net/sk98lin
390TAG_SUBDIRS += drivers/pci
391TAG_SUBDIRS += drivers/pcmcia
392TAG_SUBDIRS += drivers/qe
393TAG_SUBDIRS += drivers/rtc
394TAG_SUBDIRS += drivers/serial
395TAG_SUBDIRS += drivers/spi
396TAG_SUBDIRS += drivers/usb
397TAG_SUBDIRS += drivers/video
398
399tags ctags:
400		ctags -w -o $(obj)ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \
401						-name '*.[ch]' -print`
402
403etags:
404		etags -a -o $(obj)etags `find $(SUBDIRS) $(TAG_SUBDIRS) \
405						-name '*.[ch]' -print`
406cscope:
407		find $(SUBDIRS) $(TAG_SUBDIRS) -name '*.[ch]' -print \
408						> cscope.files
409		cscope -b -q -k
410
411$(obj)System.map:	$(obj)u-boot
412		@$(NM) $< | \
413		grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
414		sort > $(obj)System.map
415
416#
417# Auto-generate the autoconf.mk file (which is included by all makefiles)
418#
419# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
420# the dep file is only include in this top level makefile to determine when
421# to regenerate the autoconf.mk file.
422$(obj)include/autoconf.mk: $(obj)include/config.h $(VERSION_FILE)
423	@$(XECHO) Generating include/autoconf.mk ; \
424	set -e ; \
425	: Generate the dependancies ; \
426	$(CC) -M $(HOST_CFLAGS) $(CPPFLAGS) -MQ $@ include/common.h > $@.dep ; \
427	: Extract the config macros ; \
428	$(CPP) $(CFLAGS) -dM include/common.h | sed -n -f tools/scripts/define2mk.sed > $@
429
430sinclude $(obj)include/autoconf.mk.dep
431
432#########################################################################
433else	# !config.mk
434all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
435$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
436$(SUBDIRS) $(VERSION_FILE) gdbtools updater env depend \
437dep tags ctags etags cscope $(obj)System.map:
438	@echo "System not configured - see README" >&2
439	@ exit 1
440endif	# config.mk
441
442.PHONY : CHANGELOG
443CHANGELOG:
444	git log --no-merges U-Boot-1_1_5.. | \
445	unexpand -a | sed -e 's/\s\s*$$//' > $@
446
447#########################################################################
448
449unconfig:
450	@rm -f $(obj)include/config.h $(obj)include/config.mk \
451		$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
452		$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
453
454#========================================================================
455# PowerPC
456#========================================================================
457
458#########################################################################
459## MPC5xx Systems
460#########################################################################
461
462canmb_config:	unconfig
463	@$(MKCONFIG) -a canmb ppc mpc5xxx canmb
464
465cmi_mpc5xx_config:	unconfig
466	@$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi
467
468PATI_config:		unconfig
469	@$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl
470
471#########################################################################
472## MPC5xxx Systems
473#########################################################################
474
475aev_config: unconfig
476	@$(MKCONFIG) -a aev ppc mpc5xxx tqm5200
477
478BC3450_config:	unconfig
479	@$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
480
481cpci5200_config:  unconfig
482	@$(MKCONFIG) -a cpci5200  ppc mpc5xxx cpci5200 esd
483
484hmi1001_config:	unconfig
485	@$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
486
487Lite5200_config				\
488Lite5200_LOWBOOT_config			\
489Lite5200_LOWBOOT08_config		\
490icecube_5200_config			\
491icecube_5200_LOWBOOT_config		\
492icecube_5200_LOWBOOT08_config		\
493icecube_5200_DDR_config			\
494icecube_5200_DDR_LOWBOOT_config		\
495icecube_5200_DDR_LOWBOOT08_config	\
496icecube_5100_config:			unconfig
497	@mkdir -p $(obj)include
498	@mkdir -p $(obj)board/icecube
499	@ >$(obj)include/config.h
500	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
501		{ if [ "$(findstring DDR,$@)" ] ; \
502			then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
503			else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
504		  fi ; \
505		  $(XECHO) "... with LOWBOOT configuration" ; \
506		}
507	@[ -z "$(findstring LOWBOOT08,$@)" ] || \
508		{ echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
509		  echo "... with 8 MB flash only" ; \
510		  $(XECHO) "... with LOWBOOT configuration" ; \
511		}
512	@[ -z "$(findstring DDR,$@)" ] || \
513		{ echo "#define CONFIG_MPC5200_DDR"	>>$(obj)include/config.h ; \
514		  $(XECHO) "... DDR memory revision" ; \
515		}
516	@[ -z "$(findstring 5200,$@)" ] || \
517		{ echo "#define CONFIG_MPC5200"		>>$(obj)include/config.h ; \
518		  $(XECHO) "... with MPC5200 processor" ; \
519		}
520	@[ -z "$(findstring 5100,$@)" ] || \
521		{ echo "#define CONFIG_MGT5100"		>>$(obj)include/config.h ; \
522		  $(XECHO) "... with MGT5100 processor" ; \
523		}
524	@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
525
526jupiter_config:	unconfig
527	@$(MKCONFIG) jupiter ppc mpc5xxx jupiter
528
529v38b_config: unconfig
530	@$(MKCONFIG) -a v38b ppc mpc5xxx v38b
531
532inka4x0_config:	unconfig
533	@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
534
535lite5200b_config	\
536lite5200b_PM_config	\
537lite5200b_LOWBOOT_config:	unconfig
538	@mkdir -p $(obj)include
539	@mkdir -p $(obj)board/icecube
540	@ >$(obj)include/config.h
541	@ echo "#define CONFIG_MPC5200_DDR"	>>$(obj)include/config.h
542	@ $(XECHO) "... DDR memory revision"
543	@ echo "#define CONFIG_MPC5200"		>>$(obj)include/config.h
544	@ echo "#define CONFIG_LITE5200B"	>>$(obj)include/config.h
545	@[ -z "$(findstring _PM_,$@)" ] || \
546		{ echo "#define CONFIG_LITE5200B_PM"	>>$(obj)include/config.h ; \
547		  $(XECHO) "... with power management (low-power mode) support" ; \
548		}
549	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
550		{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
551		  $(XECHO) "... with LOWBOOT configuration" ; \
552		}
553	@ $(XECHO) "... with MPC5200B processor"
554	@$(MKCONFIG) -a IceCube  ppc mpc5xxx icecube
555
556mcc200_config	\
557mcc200_SDRAM_config	\
558mcc200_highboot_config	\
559mcc200_COM12_config	\
560mcc200_COM12_SDRAM_config	\
561mcc200_COM12_highboot_config	\
562mcc200_COM12_highboot_SDRAM_config	\
563mcc200_highboot_SDRAM_config	\
564prs200_config	\
565prs200_DDR_config	\
566prs200_highboot_config	\
567prs200_highboot_DDR_config:	unconfig
568	@mkdir -p $(obj)include
569	@mkdir -p $(obj)board/mcc200
570	@ >$(obj)include/config.h
571	@[ -n "$(findstring highboot,$@)" ] || \
572		{ $(XECHO) "... with lowboot configuration" ; \
573		}
574	@[ -z "$(findstring highboot,$@)" ] || \
575		{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \
576		  $(XECHO) "... with highboot configuration" ; \
577		}
578	@[ -n "$(findstring _SDRAM,$@)" ] || \
579		{ if [ -n "$(findstring mcc200,$@)" ]; \
580		  then \
581			$(XECHO) "... with DDR" ; \
582		  else \
583			if [ -n "$(findstring _DDR,$@)" ];\
584			then \
585				$(XECHO) "... with DDR" ; \
586			else \
587				echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
588				$(XECHO) "... with SDRAM" ; \
589			fi; \
590		  fi; \
591		}
592	@[ -z "$(findstring _SDRAM,$@)" ] || \
593		{ echo "#define CONFIG_MCC200_SDRAM"	>>$(obj)include/config.h ; \
594		  $(XECHO) "... with SDRAM" ; \
595		}
596	@[ -z "$(findstring COM12,$@)" ] || \
597		{ echo "#define CONFIG_CONSOLE_COM12"	>>$(obj)include/config.h ; \
598		  $(XECHO) "... with console on COM12" ; \
599		}
600	@[ -z "$(findstring prs200,$@)" ] || \
601		{ echo "#define CONFIG_PRS200"  >>$(obj)include/config.h ;\
602		}
603	@$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200
604
605mecp5200_config:  unconfig
606	@$(MKCONFIG) mecp5200  ppc mpc5xxx mecp5200 esd
607
608munices_config:	unconfig
609	@$(MKCONFIG) munices ppc mpc5xxx munices
610
611o2dnt_config:	unconfig
612	@$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
613
614pf5200_config:  unconfig
615	@$(MKCONFIG) pf5200  ppc mpc5xxx pf5200 esd
616
617PM520_config \
618PM520_DDR_config \
619PM520_ROMBOOT_config \
620PM520_ROMBOOT_DDR_config:	unconfig
621	@mkdir -p $(obj)include
622	@ >$(obj)include/config.h
623	@[ -z "$(findstring DDR,$@)" ] || \
624		{ echo "#define CONFIG_MPC5200_DDR"	>>$(obj)include/config.h ; \
625		  $(XECHO) "... DDR memory revision" ; \
626		}
627	@[ -z "$(findstring ROMBOOT,$@)" ] || \
628		{ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
629		  $(XECHO) "... booting from 8-bit flash" ; \
630		}
631	@$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
632
633smmaco4_config: unconfig
634	@$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200
635
636cm5200_config:	unconfig
637	@$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
638
639spieval_config:	unconfig
640	@$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200
641
642TB5200_B_config \
643TB5200_config:	unconfig
644	@mkdir -p $(obj)include
645	@[ -z "$(findstring _B,$@)" ] || \
646		{ echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h ; \
647		  $(XECHO) "... with MPC5200B processor" ; \
648		}
649	@$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200
650
651MINI5200_config	\
652EVAL5200_config	\
653TOP5200_config:	unconfig
654	@mkdir -p $(obj)include
655	@ echo "#define CONFIG_$(@:_config=) 1"	>$(obj)include/config.h
656	@$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
657
658Total5100_config		\
659Total5200_config		\
660Total5200_lowboot_config	\
661Total5200_Rev2_config		\
662Total5200_Rev2_lowboot_config:	unconfig
663	@mkdir -p $(obj)include
664	@mkdir -p $(obj)board/total5200
665	@ >$(obj)include/config.h
666	@[ -z "$(findstring 5100,$@)" ] || \
667		{ echo "#define CONFIG_MGT5100"		>>$(obj)include/config.h ; \
668		  $(XECHO) "... with MGT5100 processor" ; \
669		}
670	@[ -z "$(findstring 5200,$@)" ] || \
671		{ echo "#define CONFIG_MPC5200"		>>$(obj)include/config.h ; \
672		  $(XECHO) "... with MPC5200 processor" ; \
673		}
674	@[ -n "$(findstring Rev,$@)" ] || \
675		{ echo "#define CONFIG_TOTAL5200_REV 1"	>>$(obj)include/config.h ; \
676		  $(XECHO) "... revision 1 board" ; \
677		}
678	@[ -z "$(findstring Rev2_,$@)" ] || \
679		{ echo "#define CONFIG_TOTAL5200_REV 2"	>>$(obj)include/config.h ; \
680		  $(XECHO) "... revision 2 board" ; \
681		}
682	@[ -z "$(findstring lowboot_,$@)" ] || \
683		{ echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
684		  $(XECHO) "... with lowboot configuration" ; \
685		}
686	@$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
687
688cam5200_config \
689cam5200_niosflash_config \
690fo300_config \
691MiniFAP_config \
692TQM5200S_config \
693TQM5200S_HIGHBOOT_config \
694TQM5200_B_config \
695TQM5200_B_HIGHBOOT_config \
696TQM5200_config	\
697TQM5200_STK100_config:	unconfig
698	@mkdir -p $(obj)include
699	@mkdir -p $(obj)board/tqm5200
700	@ >$(obj)include/config.h
701	@[ -z "$(findstring cam5200,$@)" ] || \
702		{ echo "#define CONFIG_CAM5200"	>>$(obj)include/config.h ; \
703		  echo "#define CONFIG_TQM5200S"	>>$(obj)include/config.h ; \
704		  echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h ; \
705		  $(XECHO) "... TQM5200S on Cam5200" ; \
706		}
707	@[ -z "$(findstring niosflash,$@)" ] || \
708		{ echo "#define CONFIG_CAM5200_NIOSFLASH"	>>$(obj)include/config.h ; \
709		  $(XECHO) "... with NIOS flash driver" ; \
710		}
711	@[ -z "$(findstring fo300,$@)" ] || \
712		{ echo "#define CONFIG_FO300"	>>$(obj)include/config.h ; \
713		  $(XECHO) "... TQM5200 on FO300" ; \
714		}
715	@[ -z "$(findstring MiniFAP,$@)" ] || \
716		{ echo "#define CONFIG_MINIFAP"	>>$(obj)include/config.h ; \
717		  $(XECHO) "... TQM5200_AC on MiniFAP" ; \
718		}
719	@[ -z "$(findstring STK100,$@)" ] || \
720		{ echo "#define CONFIG_STK52XX_REV100"	>>$(obj)include/config.h ; \
721		  $(XECHO) "... on a STK52XX.100 base board" ; \
722		}
723	@[ -z "$(findstring TQM5200_B,$@)" ] || \
724		{ echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h ; \
725		}
726	@[ -z "$(findstring TQM5200S,$@)" ] || \
727		{ echo "#define CONFIG_TQM5200S"	>>$(obj)include/config.h ; \
728		  echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h ; \
729		}
730	@[ -z "$(findstring HIGHBOOT,$@)" ] || \
731		{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
732		}
733	@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200
734uc101_config:		unconfig
735	@$(MKCONFIG) uc101 ppc mpc5xxx uc101
736motionpro_config:	unconfig
737	@$(MKCONFIG) motionpro ppc mpc5xxx motionpro
738
739
740#########################################################################
741## MPC512x Systems
742#########################################################################
743ads5121_config \
744ads5121_PCI_config \
745	:		 unconfig
746	@echo "" >$(obj)include/config.h
747	@if [ "$(findstring _PCI_,$@)" ] ; then \
748		echo "#define CONFIG_PCI"  >>$(obj)include/config.h ; \
749		$(XECHO) "... with PCI enabled" ; \
750	fi
751	@$(MKCONFIG) -a ads5121 ppc mpc512x ads5121
752
753
754#########################################################################
755## MPC8xx Systems
756#########################################################################
757
758Adder_config    \
759Adder87x_config \
760AdderII_config  \
761	:		unconfig
762	@mkdir -p $(obj)include
763	$(if $(findstring AdderII,$@), \
764	@echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
765	@$(MKCONFIG) -a Adder ppc mpc8xx adder
766
767AdderUSB_config:	unconfig
768	@$(MKCONFIG) -a AdderUSB ppc mpc8xx adder
769
770ADS860_config     \
771FADS823_config    \
772FADS850SAR_config \
773MPC86xADS_config  \
774MPC885ADS_config  \
775FADS860T_config:	unconfig
776	@$(MKCONFIG) $(@:_config=) ppc mpc8xx fads
777
778AMX860_config	:	unconfig
779	@$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel
780
781c2mon_config:		unconfig
782	@$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon
783
784CCM_config:		unconfig
785	@$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens
786
787cogent_mpc8xx_config:	unconfig
788	@$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent
789
790ELPT860_config:		unconfig
791	@$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX
792
793EP88x_config:		unconfig
794	@$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x
795
796ESTEEM192E_config:	unconfig
797	@$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e
798
799ETX094_config	:	unconfig
800	@$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094
801
802FLAGADM_config:	unconfig
803	@$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm
804
805xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
806
807GEN860T_SC_config	\
808GEN860T_config: unconfig
809	@mkdir -p $(obj)include
810	@ >$(obj)include/config.h
811	@[ -z "$(findstring _SC,$@)" ] || \
812		{ echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
813		  $(XECHO) "With reduced H/W feature set (SC)..." ; \
814		}
815	@$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
816
817GENIETV_config:	unconfig
818	@$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv
819
820GTH_config:	unconfig
821	@$(MKCONFIG) $(@:_config=) ppc mpc8xx gth
822
823hermes_config	:	unconfig
824	@$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
825
826HMI10_config	:	unconfig
827	@$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx
828
829IAD210_config: unconfig
830	@$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
831
832xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
833
834ICU862_100MHz_config	\
835ICU862_config: unconfig
836	@mkdir -p $(obj)include
837	@ >$(obj)include/config.h
838	@[ -z "$(findstring _100MHz,$@)" ] || \
839		{ echo "#define CONFIG_100MHz"	>>$(obj)include/config.h ; \
840		  $(XECHO) "... with 100MHz system clock" ; \
841		}
842	@$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
843
844IP860_config	:	unconfig
845	@$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860
846
847IVML24_256_config \
848IVML24_128_config \
849IVML24_config:	unconfig
850	@mkdir -p $(obj)include
851	@ >$(obj)include/config.h
852	@[ -z "$(findstring IVML24_config,$@)" ] || \
853		 { echo "#define CONFIG_IVML24_16M"	>>$(obj)include/config.h ; \
854		 }
855	@[ -z "$(findstring IVML24_128_config,$@)" ] || \
856		 { echo "#define CONFIG_IVML24_32M"	>>$(obj)include/config.h ; \
857		 }
858	@[ -z "$(findstring IVML24_256_config,$@)" ] || \
859		 { echo "#define CONFIG_IVML24_64M"	>>$(obj)include/config.h ; \
860		 }
861	@$(MKCONFIG) -a IVML24 ppc mpc8xx ivm
862
863IVMS8_256_config \
864IVMS8_128_config \
865IVMS8_config:	unconfig
866	@mkdir -p $(obj)include
867	@ >$(obj)include/config.h
868	@[ -z "$(findstring IVMS8_config,$@)" ] || \
869		 { echo "#define CONFIG_IVMS8_16M"	>>$(obj)include/config.h ; \
870		 }
871	@[ -z "$(findstring IVMS8_128_config,$@)" ] || \
872		 { echo "#define CONFIG_IVMS8_32M"	>>$(obj)include/config.h ; \
873		 }
874	@[ -z "$(findstring IVMS8_256_config,$@)" ] || \
875		 { echo "#define CONFIG_IVMS8_64M"	>>$(obj)include/config.h ; \
876		 }
877	@$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
878
879KUP4K_config	:	unconfig
880	@$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
881
882KUP4X_config    :       unconfig
883	@$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup
884
885LANTEC_config	:	unconfig
886	@$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec
887
888lwmon_config:		unconfig
889	@$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon
890
891MBX_config	\
892MBX860T_config:	unconfig
893	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
894
895mgsuvd_config:		unconfig
896	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd
897
898MHPC_config:		unconfig
899	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
900
901MVS1_config :		unconfig
902	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mvs1
903
904xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
905
906NETVIA_V2_config \
907NETVIA_config:		unconfig
908	@mkdir -p $(obj)include
909	@ >$(obj)include/config.h
910	@[ -z "$(findstring NETVIA_config,$@)" ] || \
911		 { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
912		  $(XECHO) "... Version 1" ; \
913		 }
914	@[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
915		 { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
916		  $(XECHO) "... Version 2" ; \
917		 }
918	@$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
919
920xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
921
922NETPHONE_V2_config \
923NETPHONE_config:	unconfig
924	@mkdir -p $(obj)include
925	@ >$(obj)include/config.h
926	@[ -z "$(findstring NETPHONE_config,$@)" ] || \
927		 { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
928		 }
929	@[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
930		 { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
931		 }
932	@$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
933
934xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
935
936NETTA_ISDN_6412_SWAPHOOK_config \
937NETTA_ISDN_SWAPHOOK_config \
938NETTA_6412_SWAPHOOK_config \
939NETTA_SWAPHOOK_config \
940NETTA_ISDN_6412_config \
941NETTA_ISDN_config \
942NETTA_6412_config \
943NETTA_config:		unconfig
944	@mkdir -p $(obj)include
945	@ >$(obj)include/config.h
946	@[ -z "$(findstring ISDN_,$@)" ] || \
947		 { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
948		 }
949	@[ -n "$(findstring ISDN_,$@)" ] || \
950		 { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
951		 }
952	@[ -z "$(findstring 6412_,$@)" ] || \
953		 { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
954		 }
955	@[ -n "$(findstring 6412_,$@)" ] || \
956		 { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
957		 }
958	@[ -z "$(findstring SWAPHOOK_,$@)" ] || \
959		 { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
960		 }
961	@[ -n "$(findstring SWAPHOOK_,$@)" ] || \
962		 { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
963		 }
964	@$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta
965
966xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
967
968NETTA2_V2_config \
969NETTA2_config:		unconfig
970	@mkdir -p $(obj)include
971	@ >$(obj)include/config.h
972	@[ -z "$(findstring NETTA2_config,$@)" ] || \
973		 { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
974		 }
975	@[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
976		 { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
977		 }
978	@$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
979
980NC650_Rev1_config \
981NC650_Rev2_config \
982CP850_config:	unconfig
983	@mkdir -p $(obj)include
984	@ >$(obj)include/config.h
985	@[ -z "$(findstring CP850,$@)" ] || \
986		 { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
987		   echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
988		 }
989	@[ -z "$(findstring Rev1,$@)" ] || \
990		 { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
991		 }
992	@[ -z "$(findstring Rev2,$@)" ] || \
993		 { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
994		 }
995	@$(MKCONFIG) -a NC650 ppc mpc8xx nc650
996
997NX823_config:		unconfig
998	@$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823
999
1000pcu_e_config:		unconfig
1001	@$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens
1002
1003QS850_config:	unconfig
1004	@$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1005
1006QS823_config:	unconfig
1007	@$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1008
1009QS860T_config:	unconfig
1010	@$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc
1011
1012quantum_config:	unconfig
1013	@$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum
1014
1015R360MPI_config:	unconfig
1016	@$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi
1017
1018RBC823_config:	unconfig
1019	@$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823
1020
1021RPXClassic_config:	unconfig
1022	@$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic
1023
1024RPXlite_config:		unconfig
1025	@$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
1026
1027RPXlite_DW_64_config		\
1028RPXlite_DW_LCD_config		\
1029RPXlite_DW_64_LCD_config	\
1030RPXlite_DW_NVRAM_config		\
1031RPXlite_DW_NVRAM_64_config      \
1032RPXlite_DW_NVRAM_LCD_config	\
1033RPXlite_DW_NVRAM_64_LCD_config  \
1034RPXlite_DW_config:	unconfig
1035	@mkdir -p $(obj)include
1036	@ >$(obj)include/config.h
1037	@[ -z "$(findstring _64,$@)" ] || \
1038		{ echo "#define RPXlite_64MHz"		>>$(obj)include/config.h ; \
1039		  $(XECHO) "... with 64MHz system clock ..."; \
1040		}
1041	@[ -z "$(findstring _LCD,$@)" ] || \
1042		{ echo "#define CONFIG_LCD"		>>$(obj)include/config.h ; \
1043		  echo "#define CONFIG_NEC_NL6448BC20"	>>$(obj)include/config.h ; \
1044		  $(XECHO) "... with LCD display ..."; \
1045		}
1046	@[ -z "$(findstring _NVRAM,$@)" ] || \
1047		{ echo "#define  CFG_ENV_IS_IN_NVRAM"	>>$(obj)include/config.h ; \
1048		  $(XECHO) "... with ENV in NVRAM ..."; \
1049		}
1050	@$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
1051
1052rmu_config:	unconfig
1053	@$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu
1054
1055RRvision_config:	unconfig
1056	@$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision
1057
1058RRvision_LCD_config:	unconfig
1059	@mkdir -p $(obj)include
1060	@echo "#define CONFIG_LCD" >$(obj)include/config.h
1061	@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1062	@$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
1063
1064SM850_config	:	unconfig
1065	@$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx
1066
1067spc1920_config:		unconfig
1068	@$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
1069
1070SPD823TS_config:	unconfig
1071	@$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx
1072
1073stxxtc_config:	unconfig
1074	@$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc
1075
1076svm_sc8xx_config:	unconfig
1077	@$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx
1078
1079SXNI855T_config:	unconfig
1080	@$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet
1081
1082# EMK MPC8xx based modules
1083TOP860_config:		unconfig
1084	@$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk
1085
1086# Play some tricks for configuration selection
1087# Only 855 and 860 boards may come with FEC
1088# and only 823 boards may have LCD support
1089xtract_8xx = $(subst _LCD,,$(subst _config,,$1))
1090
1091FPS850L_config		\
1092FPS860L_config		\
1093NSCU_config		\
1094TQM823L_config		\
1095TQM823L_LCD_config	\
1096TQM850L_config		\
1097TQM855L_config		\
1098TQM860L_config		\
1099TQM862L_config		\
1100TQM823M_config		\
1101TQM850M_config		\
1102TQM855M_config		\
1103TQM860M_config		\
1104TQM862M_config		\
1105TQM866M_config		\
1106TQM885D_config		\
1107TK885D_config		\
1108virtlab2_config:	unconfig
1109	@mkdir -p $(obj)include
1110	@ >$(obj)include/config.h
1111	@[ -z "$(findstring _LCD,$@)" ] || \
1112		{ echo "#define CONFIG_LCD"		>>$(obj)include/config.h ; \
1113		  echo "#define CONFIG_NEC_NL6448BC20"	>>$(obj)include/config.h ; \
1114		  $(XECHO) "... with LCD display" ; \
1115		}
1116	@$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx
1117
1118TTTech_config:	unconfig
1119	@mkdir -p $(obj)include
1120	@echo "#define CONFIG_LCD" >$(obj)include/config.h
1121	@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1122	@$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx
1123
1124uc100_config	:	unconfig
1125	@$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
1126
1127v37_config:	unconfig
1128	@mkdir -p $(obj)include
1129	@echo "#define CONFIG_LCD" >$(obj)include/config.h
1130	@echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
1131	@$(MKCONFIG) $(@:_config=) ppc mpc8xx v37
1132
1133wtk_config:	unconfig
1134	@mkdir -p $(obj)include
1135	@echo "#define CONFIG_LCD" >$(obj)include/config.h
1136	@echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
1137	@$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx
1138
1139#########################################################################
1140## PPC4xx Systems
1141#########################################################################
1142xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
1143
1144acadia_config:	unconfig
1145	@$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
1146
1147acadia_nand_config:	unconfig
1148	@mkdir -p $(obj)include $(obj)board/amcc/acadia
1149	@mkdir -p $(obj)nand_spl/board/amcc/acadia
1150	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1151	@$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
1152	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
1153	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1154
1155ADCIOP_config:	unconfig
1156	@$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
1157
1158alpr_config:	unconfig
1159	@$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
1160
1161AP1000_config:unconfig
1162	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
1163
1164APC405_config:	unconfig
1165	@$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd
1166
1167AR405_config:	unconfig
1168	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd
1169
1170ASH405_config:	unconfig
1171	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd
1172
1173bamboo_config:	unconfig
1174	@$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
1175
1176bamboo_nand_config:	unconfig
1177	@mkdir -p $(obj)include $(obj)board/amcc/bamboo
1178	@mkdir -p $(obj)nand_spl/board/amcc/bamboo
1179	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1180	@$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
1181	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
1182	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1183
1184bubinga_config:	unconfig
1185	@$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
1186
1187CANBT_config:	unconfig
1188	@$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
1189
1190CATcenter_config	\
1191CATcenter_25_config	\
1192CATcenter_33_config:	unconfig
1193	@mkdir -p $(obj)include
1194	@ echo "/* CATcenter uses PPChameleon Model ME */"  > $(obj)include/config.h
1195	@ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
1196	@[ -z "$(findstring _25,$@)" ] || \
1197		{ echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
1198		  $(XECHO) "SysClk = 25MHz" ; \
1199		}
1200	@[ -z "$(findstring _33,$@)" ] || \
1201		{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
1202		  $(XECHO) "SysClk = 33MHz" ; \
1203		}
1204	@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1205
1206CPCI2DP_config:	unconfig
1207	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
1208
1209CPCI405_config	\
1210CPCI4052_config	\
1211CPCI405DT_config	\
1212CPCI405AB_config:	unconfig
1213	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
1214	@echo "BOARD_REVISION = $(@:_config=)"	>> $(obj)include/config.mk
1215
1216CPCIISER4_config:	unconfig
1217	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
1218
1219CRAYL1_config:	unconfig
1220	@$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray
1221
1222csb272_config:	unconfig
1223	@$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272
1224
1225csb472_config:	unconfig
1226	@$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472
1227
1228DASA_SIM_config: unconfig
1229	@$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
1230
1231DP405_config:	unconfig
1232	@$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
1233
1234DU405_config:	unconfig
1235	@$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
1236
1237DU440_config:	unconfig
1238	@$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd
1239
1240ebony_config:	unconfig
1241	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
1242
1243ERIC_config:	unconfig
1244	@$(MKCONFIG) $(@:_config=) ppc ppc4xx eric
1245
1246EXBITGEN_config:	unconfig
1247	@$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen
1248
1249G2000_config:	unconfig
1250	@$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
1251
1252hcu4_config:	unconfig
1253	@mkdir -p $(obj)board/netstal/common
1254	@$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
1255
1256hcu5_config:	unconfig
1257	@mkdir -p $(obj)board/netstal/common
1258	@$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal
1259
1260HH405_config:	unconfig
1261	@$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
1262
1263HUB405_config:	unconfig
1264	@$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
1265
1266JSE_config:	unconfig
1267	@$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
1268
1269KAREF_config: unconfig
1270	@$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
1271
1272katmai_config:	unconfig
1273	@$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
1274
1275# Kilauea & Haleakala images are identical (recognized via PVR)
1276kilauea_config \
1277haleakala_config: unconfig
1278	@$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1279
1280kilauea_nand_config \
1281haleakala_nand_config: unconfig
1282	@mkdir -p $(obj)include $(obj)board/amcc/kilauea
1283	@mkdir -p $(obj)nand_spl/board/amcc/kilauea
1284	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1285	@$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1286	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
1287	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1288
1289korat_config:	unconfig
1290	@$(MKCONFIG) $(@:_config=) ppc ppc4xx korat
1291
1292luan_config:	unconfig
1293	@$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
1294
1295lwmon5_config:	unconfig
1296	@$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
1297
1298makalu_config:	unconfig
1299	@$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
1300
1301METROBOX_config: unconfig
1302	@$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
1303
1304MIP405_config:	unconfig
1305	@$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl
1306
1307MIP405T_config:	unconfig
1308	@mkdir -p $(obj)include
1309	@echo "#define CONFIG_MIP405T" >$(obj)include/config.h
1310	@$(XECHO) "Enable subset config for MIP405T"
1311	@$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl
1312
1313ML2_config:	unconfig
1314	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
1315
1316ml300_config:	unconfig
1317	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
1318
1319ocotea_config:	unconfig
1320	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
1321
1322OCRTC_config		\
1323ORSG_config:	unconfig
1324	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd
1325
1326p3p440_config:	unconfig
1327	@$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive
1328
1329PCI405_config:	unconfig
1330	@$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd
1331
1332pcs440ep_config:	unconfig
1333	@$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep
1334
1335PIP405_config:	unconfig
1336	@$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl
1337
1338PLU405_config:	unconfig
1339	@$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd
1340
1341PMC405_config:	unconfig
1342	@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
1343
1344PMC440_config:	unconfig
1345	@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
1346
1347PPChameleonEVB_config		\
1348PPChameleonEVB_BA_25_config	\
1349PPChameleonEVB_ME_25_config	\
1350PPChameleonEVB_HI_25_config	\
1351PPChameleonEVB_BA_33_config	\
1352PPChameleonEVB_ME_33_config	\
1353PPChameleonEVB_HI_33_config:	unconfig
1354	@mkdir -p $(obj)include
1355	@ >$(obj)include/config.h
1356	@[ -z "$(findstring EVB_BA,$@)" ] || \
1357		{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
1358		  $(XECHO) "... BASIC model" ; \
1359		}
1360	@[ -z "$(findstring EVB_ME,$@)" ] || \
1361		{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
1362		  $(XECHO) "... MEDIUM model" ; \
1363		}
1364	@[ -z "$(findstring EVB_HI,$@)" ] || \
1365		{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
1366		  $(XECHO) "... HIGH-END model" ; \
1367		}
1368	@[ -z "$(findstring _25,$@)" ] || \
1369		{ echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
1370		  $(XECHO) "SysClk = 25MHz" ; \
1371		}
1372	@[ -z "$(findstring _33,$@)" ] || \
1373		{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
1374		  $(XECHO) "SysClk = 33MHz" ; \
1375		}
1376	@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1377
1378sbc405_config:	unconfig
1379	@$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
1380
1381sequoia_config \
1382rainier_config: unconfig
1383	@mkdir -p $(obj)include
1384	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1385		tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1386	@$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1387
1388sequoia_nand_config \
1389rainier_nand_config: unconfig
1390	@mkdir -p $(obj)include $(obj)board/amcc/sequoia
1391	@mkdir -p $(obj)nand_spl/board/amcc/sequoia
1392	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1393	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1394		tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1395	@$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1396	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1397	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1398
1399sc3_config:unconfig
1400	@$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
1401
1402taihu_config:	unconfig
1403	@$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
1404
1405taishan_config:	unconfig
1406	@$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
1407
1408VOH405_config:	unconfig
1409	@$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
1410
1411VOM405_config:	unconfig
1412	@$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
1413
1414CMS700_config:	unconfig
1415	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
1416
1417W7OLMC_config	\
1418W7OLMG_config: unconfig
1419	@$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
1420
1421# Walnut & Sycamore images are identical (recognized via PVR)
1422walnut_config \
1423sycamore_config: unconfig
1424	@$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc
1425
1426WUH405_config:	unconfig
1427	@$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
1428
1429XPEDITE1K_config:	unconfig
1430	@$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k
1431
1432yosemite_config \
1433yellowstone_config: unconfig
1434	@mkdir -p $(obj)include
1435	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1436		tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1437	@$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc
1438
1439yucca_config:	unconfig
1440	@$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
1441
1442zeus_config:	unconfig
1443	@$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
1444
1445#########################################################################
1446## MPC8220 Systems
1447#########################################################################
1448
1449Alaska8220_config	\
1450Yukon8220_config:	unconfig
1451	@$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska
1452
1453sorcery_config:		unconfig
1454	@$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery
1455
1456#########################################################################
1457## MPC824x Systems
1458#########################################################################
1459xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
1460
1461A3000_config: unconfig
1462	@$(MKCONFIG) $(@:_config=) ppc mpc824x a3000
1463
1464barco_config: unconfig
1465	@$(MKCONFIG) $(@:_config=) ppc mpc824x barco
1466
1467BMW_config: unconfig
1468	@$(MKCONFIG) $(@:_config=) ppc mpc824x bmw
1469
1470CPC45_config	\
1471CPC45_ROMBOOT_config:	unconfig
1472	@$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45
1473	@cd $(obj)include ;				\
1474	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1475		echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1476		$(XECHO) "... booting from 8-bit flash" ; \
1477	else \
1478		echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1479		$(XECHO) "... booting from 64-bit flash" ; \
1480	fi; \
1481	echo "export CONFIG_BOOT_ROM" >> config.mk;
1482
1483CU824_config: unconfig
1484	@$(MKCONFIG) $(@:_config=) ppc mpc824x cu824
1485
1486debris_config: unconfig
1487	@$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin
1488
1489eXalion_config: unconfig
1490	@$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion
1491
1492HIDDEN_DRAGON_config: unconfig
1493	@$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon
1494
1495kvme080_config: unconfig
1496	@$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
1497
1498MOUSSE_config: unconfig
1499	@$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
1500
1501MUSENKI_config: unconfig
1502	@$(MKCONFIG) $(@:_config=) ppc mpc824x musenki
1503
1504MVBLUE_config:	unconfig
1505	@$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue
1506
1507OXC_config: unconfig
1508	@$(MKCONFIG) $(@:_config=) ppc mpc824x oxc
1509
1510PN62_config: unconfig
1511	@$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
1512
1513Sandpoint8240_config: unconfig
1514	@$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1515
1516Sandpoint8245_config: unconfig
1517	@$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1518
1519sbc8240_config: unconfig
1520	@$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240
1521
1522SL8245_config: unconfig
1523	@$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245
1524
1525utx8245_config: unconfig
1526	@$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245
1527
1528#########################################################################
1529## MPC8260 Systems
1530#########################################################################
1531
1532atc_config:	unconfig
1533	@$(MKCONFIG) $(@:_config=) ppc mpc8260 atc
1534
1535cogent_mpc8260_config:	unconfig
1536	@$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent
1537
1538CPU86_config	\
1539CPU86_ROMBOOT_config: unconfig
1540	@$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86
1541	@cd $(obj)include ;				\
1542	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1543		echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1544		$(XECHO) "... booting from 8-bit flash" ; \
1545	else \
1546		echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1547		$(XECHO) "... booting from 64-bit flash" ; \
1548	fi; \
1549	echo "export CONFIG_BOOT_ROM" >> config.mk;
1550
1551CPU87_config	\
1552CPU87_ROMBOOT_config: unconfig
1553	@$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87
1554	@cd $(obj)include ;				\
1555	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1556		echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1557		$(XECHO) "... booting from 8-bit flash" ; \
1558	else \
1559		echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1560		$(XECHO) "... booting from 64-bit flash" ; \
1561	fi; \
1562	echo "export CONFIG_BOOT_ROM" >> config.mk;
1563
1564ep8248_config	\
1565ep8248E_config	:	unconfig
1566	@$(MKCONFIG) ep8248 ppc mpc8260 ep8248
1567
1568ep8260_config:	unconfig
1569	@$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
1570
1571ep82xxm_config:	unconfig
1572	@$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
1573
1574gw8260_config:	unconfig
1575	@$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
1576
1577hymod_config:	unconfig
1578	@$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod
1579
1580IDS8247_config:	unconfig
1581	@$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247
1582
1583IPHASE4539_config:	unconfig
1584	@$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539
1585
1586ISPAN_config		\
1587ISPAN_REVB_config:	unconfig
1588	@mkdir -p $(obj)include
1589	@if [ "$(findstring _REVB_,$@)" ] ; then \
1590		echo "#define CFG_REV_B" > $(obj)include/config.h ; \
1591	fi
1592	@$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
1593
1594mgcoge_config	:	unconfig
1595	@$(MKCONFIG) mgcoge ppc mpc8260 mgcoge
1596
1597MPC8260ADS_config	\
1598MPC8260ADS_lowboot_config	\
1599MPC8260ADS_33MHz_config	\
1600MPC8260ADS_33MHz_lowboot_config	\
1601MPC8260ADS_40MHz_config	\
1602MPC8260ADS_40MHz_lowboot_config	\
1603MPC8272ADS_config	\
1604MPC8272ADS_lowboot_config	\
1605PQ2FADS_config		\
1606PQ2FADS_lowboot_config		\
1607PQ2FADS-VR_config	\
1608PQ2FADS-VR_lowboot_config	\
1609PQ2FADS-ZU_config	\
1610PQ2FADS-ZU_lowboot_config	\
1611PQ2FADS-ZU_66MHz_config	\
1612PQ2FADS-ZU_66MHz_lowboot_config	\
1613	:		unconfig
1614	@mkdir -p $(obj)include
1615	@mkdir -p $(obj)board/mpc8260ads
1616	$(if $(findstring PQ2FADS,$@), \
1617	@echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > $(obj)include/config.h, \
1618	@echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
1619	$(if $(findstring MHz,$@), \
1620	@echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
1621	$(if $(findstring VR,$@), \
1622	@echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
1623	@[ -z "$(findstring lowboot_,$@)" ] || \
1624		{ echo "TEXT_BASE = 0xFF800000" >$(obj)board/mpc8260ads/config.tmp ; \
1625		  $(XECHO) "... with lowboot configuration" ; \
1626		}
1627	@$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads
1628
1629MPC8266ADS_config:	unconfig
1630	@$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads
1631
1632# PM825/PM826 default configuration:  small (= 8 MB) Flash / boot from 64-bit flash
1633PM825_config	\
1634PM825_ROMBOOT_config	\
1635PM825_BIGFLASH_config	\
1636PM825_ROMBOOT_BIGFLASH_config	\
1637PM826_config	\
1638PM826_ROMBOOT_config	\
1639PM826_BIGFLASH_config	\
1640PM826_ROMBOOT_BIGFLASH_config:	unconfig
1641	@mkdir -p $(obj)include
1642	@mkdir -p $(obj)board/pm826
1643	@if [ "$(findstring PM825_,$@)" ] ; then \
1644		echo "#define CONFIG_PCI"	>$(obj)include/config.h ; \
1645	else \
1646		>$(obj)include/config.h ; \
1647	fi
1648	@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1649		$(XECHO) "... booting from 8-bit flash" ; \
1650		echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1651		echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1652		if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1653			$(XECHO) "... with 32 MB Flash" ; \
1654			echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1655		fi; \
1656	else \
1657		$(XECHO) "... booting from 64-bit flash" ; \
1658		if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1659			$(XECHO) "... with 32 MB Flash" ; \
1660			echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1661			echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
1662		else \
1663			echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
1664		fi; \
1665	fi
1666	@$(MKCONFIG) -a PM826 ppc mpc8260 pm826
1667
1668PM828_config	\
1669PM828_PCI_config	\
1670PM828_ROMBOOT_config	\
1671PM828_ROMBOOT_PCI_config:	unconfig
1672	@mkdir -p $(obj)include
1673	@mkdir -p $(obj)board/pm826
1674	@if [ "$(findstring _PCI_,$@)" ] ; then \
1675		echo "#define CONFIG_PCI"  >>$(obj)include/config.h ; \
1676		$(XECHO) "... with PCI enabled" ; \
1677	else \
1678		>$(obj)include/config.h ; \
1679	fi
1680	@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1681		$(XECHO) "... booting from 8-bit flash" ; \
1682		echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1683		echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1684	fi
1685	@$(MKCONFIG) -a PM828 ppc mpc8260 pm828
1686
1687ppmc8260_config:	unconfig
1688	@$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260
1689
1690Rattler8248_config	\
1691Rattler_config:		unconfig
1692	@mkdir -p $(obj)include
1693	$(if $(findstring 8248,$@), \
1694	@echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
1695	@$(MKCONFIG) -a Rattler ppc mpc8260 rattler
1696
1697RPXsuper_config:	unconfig
1698	@$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper
1699
1700rsdproto_config:	unconfig
1701	@$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto
1702
1703sacsng_config:	unconfig
1704	@$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng
1705
1706sbc8260_config:	unconfig
1707	@$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260
1708
1709SCM_config:		unconfig
1710	@$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens
1711
1712TQM8255_AA_config \
1713TQM8260_AA_config \
1714TQM8260_AB_config \
1715TQM8260_AC_config \
1716TQM8260_AD_config \
1717TQM8260_AE_config \
1718TQM8260_AF_config \
1719TQM8260_AG_config \
1720TQM8260_AH_config \
1721TQM8260_AI_config \
1722TQM8265_AA_config:  unconfig
1723	@mkdir -p $(obj)include
1724	@case "$@" in \
1725	TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;	BMODE=8260;;  \
1726	TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;	BMODE=8260;; \
1727	TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes;	BMODE=60x;;  \
1728	TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes;	BMODE=60x;;  \
1729	TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=60x;;  \
1730	TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;	BMODE=8260;; \
1731	TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=60x;;  \
1732	TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=8260;; \
1733	TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes;	BMODE=60x;;  \
1734	TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=60x;;  \
1735	TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;	BMODE=60x;;  \
1736	esac; \
1737	>$(obj)include/config.h ; \
1738	if [ "$${CTYPE}" != "MPC8260" ] ; then \
1739		echo "#define CONFIG_$${CTYPE}"	>>$(obj)include/config.h ; \
1740	fi; \
1741	echo "#define CONFIG_$${CFREQ}MHz"	>>$(obj)include/config.h ; \
1742	echo "... with $${CFREQ}MHz system clock" ; \
1743	if [ "$${CACHE}" = "yes" ] ; then \
1744		echo "#define CONFIG_L2_CACHE"	>>$(obj)include/config.h ; \
1745		$(XECHO) "... with L2 Cache support" ; \
1746	else \
1747		echo "#undef CONFIG_L2_CACHE"	>>$(obj)include/config.h ; \
1748		$(XECHO) "... without L2 Cache support" ; \
1749	fi; \
1750	if [ "$${BMODE}" = "60x" ] ; then \
1751		echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
1752		$(XECHO) "... with 60x Bus Mode" ; \
1753	else \
1754		echo "#undef CONFIG_BUSMODE_60x"  >>$(obj)include/config.h ; \
1755		$(XECHO) "... without 60x Bus Mode" ; \
1756	fi
1757	@$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260
1758
1759TQM8272_config: unconfig
1760	@$(MKCONFIG) -a TQM8272 ppc mpc8260 tqm8272
1761
1762VoVPN-GW_66MHz_config	\
1763VoVPN-GW_100MHz_config:		unconfig
1764	@mkdir -p $(obj)include
1765	@echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
1766	@$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
1767
1768ZPC1900_config: unconfig
1769	@$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900
1770
1771#########################################################################
1772## Coldfire
1773#########################################################################
1774
1775M52277EVB_config:	unconfig
1776	@$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
1777
1778M5235EVB_config \
1779M5235EVB_Flash16_config \
1780M5235EVB_Flash32_config:	unconfig
1781	@case "$@" in \
1782	M5235EVB_config)		FLASH=16;; \
1783	M5235EVB_Flash16_config)	FLASH=16;; \
1784	M5235EVB_Flash32_config)	FLASH=32;; \
1785	esac; \
1786	>$(obj)include/config.h ; \
1787	if [ "$${FLASH}" != "16" ] ; then \
1788		echo "#define NORFLASH_PS32BIT	1" >> $(obj)include/config.h ; \
1789		echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
1790		cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
1791	else \
1792		echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
1793		cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
1794	fi
1795	@$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale
1796
1797M5249EVB_config :		unconfig
1798	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
1799
1800M5253EVBE_config :		unconfig
1801	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale
1802
1803cobra5272_config :		unconfig
1804	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
1805
1806EB+MCF-EV123_config :		unconfig
1807	@mkdir -p $(obj)include
1808	@mkdir -p $(obj)board/BuS/EB+MCF-EV123
1809	@ >$(obj)include/config.h
1810	@echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
1811	@$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
1812
1813EB+MCF-EV123_internal_config :	unconfig
1814	@mkdir -p $(obj)include
1815	@mkdir -p $(obj)board/BuS/EB+MCF-EV123
1816	@ >$(obj)include/config.h
1817	@echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
1818	@$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
1819
1820idmr_config :			unconfig
1821	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr
1822
1823M5271EVB_config :		unconfig
1824	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb
1825
1826M5272C3_config :		unconfig
1827	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3
1828
1829M5282EVB_config :		unconfig
1830	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb
1831
1832TASREG_config :		unconfig
1833	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
1834
1835r5200_config :		unconfig
1836	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 r5200
1837
1838M5329AFEE_config \
1839M5329BFEE_config :	unconfig
1840	@case "$@" in \
1841	M5329AFEE_config)	NAND=0;; \
1842	M5329BFEE_config)	NAND=16;; \
1843	esac; \
1844	>$(obj)include/config.h ; \
1845	if [ "$${NAND}" != "0" ] ; then \
1846		echo "#define NANDFLASH_SIZE	$${NAND}" > $(obj)include/config.h ; \
1847	fi
1848	@$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
1849
1850M5373EVB_config :	unconfig
1851	@case "$@" in \
1852	M5373EVB_config)	NAND=16;; \
1853	esac; \
1854	>include/config.h ; \
1855	if [ "$${NAND}" != "0" ] ; then \
1856		echo "#define NANDFLASH_SIZE	$${NAND}" > $(obj)include/config.h ; \
1857	fi
1858	@$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
1859
1860M54455EVB_config \
1861M54455EVB_atmel_config \
1862M54455EVB_intel_config \
1863M54455EVB_a33_config \
1864M54455EVB_a66_config \
1865M54455EVB_i33_config \
1866M54455EVB_i66_config :	unconfig
1867	@case "$@" in \
1868	M54455EVB_config)		FLASH=ATMEL; FREQ=33333333;; \
1869	M54455EVB_atmel_config)		FLASH=ATMEL; FREQ=33333333;; \
1870	M54455EVB_intel_config)		FLASH=INTEL; FREQ=33333333;; \
1871	M54455EVB_a33_config)		FLASH=ATMEL; FREQ=33333333;; \
1872	M54455EVB_a66_config)		FLASH=ATMEL; FREQ=66666666;; \
1873	M54455EVB_i33_config)		FLASH=INTEL; FREQ=33333333;; \
1874	M54455EVB_i66_config)		FLASH=INTEL; FREQ=66666666;; \
1875	esac; \
1876	>$(obj)include/config.h ; \
1877	if [ "$${FLASH}" = "INTEL" ] ; then \
1878		echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
1879		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
1880		cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
1881		$(XECHO) "... with INTEL boot..." ; \
1882	else \
1883		echo "#define CFG_ATMEL_BOOT"	>> $(obj)include/config.h ; \
1884		echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
1885		cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
1886		$(XECHO) "... with ATMEL boot..." ; \
1887	fi; \
1888	echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
1889	$(XECHO) "... with $${FREQ}Hz input clock"
1890	@$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
1891
1892M5475AFE_config \
1893M5475BFE_config \
1894M5475CFE_config \
1895M5475DFE_config \
1896M5475EFE_config \
1897M5475FFE_config \
1898M5475GFE_config :	unconfig
1899	@case "$@" in \
1900	M5475AFE_config)	BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
1901	M5475BFE_config)	BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
1902	M5475CFE_config)	BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
1903	M5475DFE_config)	BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
1904	M5475EFE_config)	BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
1905	M5475FFE_config)	BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
1906	M5475GFE_config)	BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
1907	esac; \
1908	>include/config.h ; \
1909	echo "#define CFG_BUSCLK	133333333" > $(obj)include/config.h ; \
1910	echo "#define CFG_BOOTSZ	$${BOOT}" >> $(obj)include/config.h ; \
1911	echo "#define CFG_DRAMSZ	$${RAM}" >> $(obj)include/config.h ; \
1912	if [ "$${RAM1}" != "0" ] ; then \
1913		echo "#define CFG_DRAMSZ1	$${RAM1}" >> $(obj)include/config.h ; \
1914	fi; \
1915	if [ "$${CODE}" != "0" ] ; then \
1916		echo "#define CFG_NOR1SZ	$${CODE}" >> $(obj)include/config.h ; \
1917	fi; \
1918	if [ "$${VID}" == "1" ] ; then \
1919		echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
1920	fi; \
1921	if [ "$${USB}" == "1" ] ; then \
1922		echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
1923	fi
1924	@$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
1925
1926M5485AFE_config \
1927M5485BFE_config \
1928M5485CFE_config \
1929M5485DFE_config \
1930M5485EFE_config \
1931M5485FFE_config \
1932M5485GFE_config \
1933M5485HFE_config :	unconfig
1934	@case "$@" in \
1935	M5485AFE_config)	BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
1936	M5485BFE_config)	BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
1937	M5485CFE_config)	BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
1938	M5485DFE_config)	BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
1939	M5485EFE_config)	BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
1940	M5485FFE_config)	BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
1941	M5485GFE_config)	BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
1942	M5485HFE_config)	BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
1943	esac; \
1944	>include/config.h ; \
1945	echo "#define CFG_BUSCLK	100000000" > $(obj)include/config.h ; \
1946	echo "#define CFG_BOOTSZ	$${BOOT}" >> $(obj)include/config.h ; \
1947	echo "#define CFG_DRAMSZ	$${RAM}" >> $(obj)include/config.h ; \
1948	if [ "$${RAM1}" != "0" ] ; then \
1949		echo "#define CFG_DRAMSZ1	$${RAM1}" >> $(obj)include/config.h ; \
1950	fi; \
1951	if [ "$${CODE}" != "0" ] ; then \
1952		echo "#define CFG_NOR1SZ	$${CODE}" >> $(obj)include/config.h ; \
1953	fi; \
1954	if [ "$${VID}" == "1" ] ; then \
1955		echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
1956	fi; \
1957	if [ "$${USB}" == "1" ] ; then \
1958		echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
1959	fi
1960	@$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
1961
1962#########################################################################
1963## MPC83xx Systems
1964#########################################################################
1965
1966MPC8313ERDB_33_config \
1967MPC8313ERDB_66_config: unconfig
1968	@mkdir -p $(obj)include
1969	@echo "" >$(obj)include/config.h ; \
1970	if [ "$(findstring _33_,$@)" ] ; then \
1971		$(XECHO) -n "...33M ..." ; \
1972		echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
1973	fi ; \
1974	if [ "$(findstring _66_,$@)" ] ; then \
1975		$(XECHO) -n "...66M..." ; \
1976		echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
1977	fi ;
1978	@$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
1979
1980MPC8315ERDB_config: unconfig
1981	@$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
1982
1983MPC8323ERDB_config:	unconfig
1984	@$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
1985
1986MPC832XEMDS_config \
1987MPC832XEMDS_HOST_33_config \
1988MPC832XEMDS_HOST_66_config \
1989MPC832XEMDS_SLAVE_config \
1990MPC832XEMDS_ATM_config:	unconfig
1991	@mkdir -p $(obj)include
1992	@echo "" >$(obj)include/config.h ; \
1993	if [ "$(findstring _HOST_,$@)" ] ; then \
1994		$(XECHO) -n "... PCI HOST " ; \
1995		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
1996	fi ; \
1997	if [ "$(findstring _SLAVE_,$@)" ] ; then \
1998		$(XECHO) "...PCI SLAVE 66M"  ; \
1999		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2000		echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2001	fi ; \
2002	if [ "$(findstring _33_,$@)" ] ; then \
2003		$(XECHO) -n "...33M ..." ; \
2004		echo "#define PCI_33M" >>$(obj)include/config.h ; \
2005		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2006	fi ; \
2007	if [ "$(findstring _66_,$@)" ] ; then \
2008		$(XECHO) -n "...66M..." ; \
2009		echo "#define PCI_66M" >>$(obj)include/config.h ; \
2010		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2011	fi ; \
2012	if [ "$(findstring _ATM_,$@)" ] ; then \
2013		$(XECHO) -n "...ATM..." ; \
2014		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2015		echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2016	fi ;
2017	@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
2018
2019MPC8349EMDS_config:	unconfig
2020	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale
2021
2022MPC8349ITX_config \
2023MPC8349ITX_LOWBOOT_config \
2024MPC8349ITXGP_config:	unconfig
2025	@mkdir -p $(obj)include
2026	@mkdir -p $(obj)board/freescale/mpc8349itx
2027	@echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
2028	@if [ "$(findstring GP,$@)" ] ; then \
2029		echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2030	fi
2031	@if [ "$(findstring LOWBOOT,$@)" ] ; then \
2032		echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2033	fi
2034	@$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale
2035
2036MPC8360EMDS_config \
2037MPC8360EMDS_HOST_33_config \
2038MPC8360EMDS_HOST_66_config \
2039MPC8360EMDS_SLAVE_config \
2040MPC8360EMDS_ATM_config: unconfig
2041	@mkdir -p $(obj)include
2042	@echo "" >$(obj)include/config.h ; \
2043	if [ "$(findstring _HOST_,$@)" ] ; then \
2044		$(XECHO) -n "... PCI HOST " ; \
2045		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2046	fi ; \
2047	if [ "$(findstring _SLAVE_,$@)" ] ; then \
2048		$(XECHO) "...PCI SLAVE 66M"  ; \
2049		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2050		echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2051	fi ; \
2052	if [ "$(findstring _33_,$@)" ] ; then \
2053		$(XECHO) -n "...33M ..." ; \
2054		echo "#define PCI_33M" >>$(obj)include/config.h ; \
2055		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2056	fi ; \
2057	if [ "$(findstring _66_,$@)" ] ; then \
2058		$(XECHO) -n "...66M..." ; \
2059		echo "#define PCI_66M" >>$(obj)include/config.h ; \
2060		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2061	fi ; \
2062	if [ "$(findstring _ATM_,$@)" ] ; then \
2063		$(XECHO) -n "...ATM..." ; \
2064		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2065		echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2066	fi ;
2067	@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
2068
2069MPC8360ERDK_33_config \
2070MPC8360ERDK_66_config \
2071MPC8360ERDK_config:	unconfig
2072	@mkdir -p $(obj)include
2073	@echo "" >$(obj)include/config.h ; \
2074	if [ "$(findstring _33_,$@)" ] ; then \
2075		$(XECHO) -n "... CLKIN 33MHz " ; \
2076		echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
2077	fi ;
2078	@$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale
2079
2080MPC837XEMDS_config \
2081MPC837XEMDS_HOST_config:	unconfig
2082	@mkdir -p $(obj)include
2083	@echo "" >$(obj)include/config.h ; \
2084	if [ "$(findstring _HOST_,$@)" ] ; then \
2085		$(XECHO) -n "... PCI HOST " ; \
2086		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2087	fi ;
2088	@$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
2089
2090MPC837XERDB_config:	unconfig
2091	@$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
2092
2093sbc8349_config:		unconfig
2094	@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
2095
2096TQM834x_config:	unconfig
2097	@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x
2098
2099
2100#########################################################################
2101## MPC85xx Systems
2102#########################################################################
2103
2104ATUM8548_config:	unconfig
2105	@$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
2106
2107MPC8540ADS_config:	unconfig
2108	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
2109
2110MPC8540EVAL_config \
2111MPC8540EVAL_33_config \
2112MPC8540EVAL_66_config \
2113MPC8540EVAL_33_slave_config \
2114MPC8540EVAL_66_slave_config:      unconfig
2115	@mkdir -p $(obj)include
2116	@echo "" >$(obj)include/config.h ; \
2117	if [ "$(findstring _33_,$@)" ] ; then \
2118		$(XECHO) "... 33 MHz PCI" ; \
2119	else \
2120		echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
2121		$(XECHO) "... 66 MHz PCI" ; \
2122	fi ; \
2123	if [ "$(findstring _slave_,$@)" ] ; then \
2124		echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
2125		$(XECHO) " slave" ; \
2126	else \
2127		$(XECHO) " host" ; \
2128	fi
2129	@$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
2130
2131MPC8560ADS_config:	unconfig
2132	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
2133
2134MPC8541CDS_legacy_config \
2135MPC8541CDS_config:	unconfig
2136	@mkdir -p $(obj)include
2137	@echo "" >$(obj)include/config.h ; \
2138	if [ "$(findstring _legacy_,$@)" ] ; then \
2139		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2140		$(XECHO) "... legacy" ; \
2141	fi
2142	@$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
2143
2144MPC8544DS_config:	unconfig
2145	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
2146
2147MPC8548CDS_legacy_config \
2148MPC8548CDS_config:	unconfig
2149	@mkdir -p $(obj)include
2150	@echo "" >$(obj)include/config.h ; \
2151	if [ "$(findstring _legacy_,$@)" ] ; then \
2152		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2153		$(XECHO) "... legacy" ; \
2154	fi
2155	@$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
2156
2157MPC8555CDS_legacy_config \
2158MPC8555CDS_config:	unconfig
2159	@mkdir -p $(obj)include
2160	@echo "" >$(obj)include/config.h ; \
2161	if [ "$(findstring _legacy_,$@)" ] ; then \
2162		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2163		$(XECHO) "... legacy" ; \
2164	fi
2165	@$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
2166
2167MPC8568MDS_config:	unconfig
2168	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
2169
2170PM854_config:	unconfig
2171	@$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
2172
2173PM856_config:	unconfig
2174	@$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856
2175
2176sbc8540_config \
2177sbc8540_33_config \
2178sbc8540_66_config:	unconfig
2179	@mkdir -p $(obj)include
2180	@if [ "$(findstring _66_,$@)" ] ; then \
2181		echo "#define CONFIG_PCI_66"	>>$(obj)include/config.h ; \
2182		$(XECHO) "... 66 MHz PCI" ; \
2183	else \
2184		>$(obj)include/config.h ; \
2185		$(XECHO) "... 33 MHz PCI" ; \
2186	fi
2187	@$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560
2188
2189sbc8548_config:		unconfig
2190	@$(MKCONFIG) $(@:_config=) ppc mpc85xx sbc8548
2191
2192sbc8560_config \
2193sbc8560_33_config \
2194sbc8560_66_config:      unconfig
2195	@mkdir -p $(obj)include
2196	@if [ "$(findstring _66_,$@)" ] ; then \
2197		echo "#define CONFIG_PCI_66"	>>$(obj)include/config.h ; \
2198		$(XECHO) "... 66 MHz PCI" ; \
2199	else \
2200		>$(obj)include/config.h ; \
2201		$(XECHO) "... 33 MHz PCI" ; \
2202	fi
2203	@$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560
2204
2205stxgp3_config:		unconfig
2206	@$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3
2207
2208stxssa_config		\
2209stxssa_4M_config:	unconfig
2210	@mkdir -p $(obj)include
2211	@if [ "$(findstring _4M_,$@)" ] ; then \
2212		echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
2213		$(XECHO) "... with 4 MiB flash memory" ; \
2214	else \
2215		>$(obj)include/config.h ; \
2216	fi
2217	@$(MKCONFIG) -a stxssa ppc mpc85xx stxssa
2218
2219TQM8540_config		\
2220TQM8541_config		\
2221TQM8555_config		\
2222TQM8560_config:		unconfig
2223	@mkdir -p $(obj)include
2224	@CTYPE=$(subst TQM,,$(@:_config=)); \
2225	>$(obj)include/config.h ; \
2226	$(XECHO) "... TQM"$${CTYPE}; \
2227	echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
2228	echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \
2229	echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
2230	echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; \
2231	echo "#define CFG_BOOTFILE_PATH \"/tftpboot/tqm$${CTYPE}/uImage\"">>$(obj)include/config.h
2232	@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx
2233
2234#########################################################################
2235## MPC86xx Systems
2236#########################################################################
2237
2238MPC8610HPCD_config:	unconfig
2239	@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
2240
2241MPC8641HPCN_config:    unconfig
2242	@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale
2243
2244sbc8641d_config:	unconfig
2245	@$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
2246
2247#########################################################################
2248## 74xx/7xx Systems
2249#########################################################################
2250
2251AmigaOneG3SE_config:	unconfig
2252	@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
2253
2254BAB7xx_config: unconfig
2255	@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
2256
2257CPCI750_config:	unconfig
2258	@$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
2259
2260DB64360_config:	unconfig
2261	@$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
2262
2263DB64460_config:	unconfig
2264	@$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
2265
2266ELPPC_config: unconfig
2267	@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec
2268
2269EVB64260_config	\
2270EVB64260_750CX_config:	unconfig
2271	@$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
2272
2273mpc7448hpc2_config:  unconfig
2274	@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2
2275
2276P3G4_config: unconfig
2277	@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2278
2279p3m750_config	\
2280p3m7448_config:		unconfig
2281	@mkdir -p $(obj)include
2282	@if [ "$(findstring 750_,$@)" ] ; then \
2283		echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \
2284	else \
2285		echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
2286	fi
2287	@$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive
2288
2289PCIPPC2_config \
2290PCIPPC6_config: unconfig
2291	@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
2292
2293ZUMA_config:	unconfig
2294	@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2295
2296ppmc7xx_config: unconfig
2297	@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
2298
2299#========================================================================
2300# ARM
2301#========================================================================
2302#########################################################################
2303## StrongARM Systems
2304#########################################################################
2305
2306assabet_config	:	unconfig
2307	@$(MKCONFIG) $(@:_config=) arm sa1100 assabet
2308
2309dnp1110_config	:	unconfig
2310	@$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110
2311
2312gcplus_config	:	unconfig
2313	@$(MKCONFIG) $(@:_config=) arm sa1100 gcplus
2314
2315lart_config	:	unconfig
2316	@$(MKCONFIG) $(@:_config=) arm sa1100 lart
2317
2318shannon_config	:	unconfig
2319	@$(MKCONFIG) $(@:_config=) arm sa1100 shannon
2320
2321#########################################################################
2322## ARM92xT Systems
2323#########################################################################
2324
2325xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
2326
2327xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
2328
2329xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
2330
2331at91cap9adk_config	:	unconfig
2332	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91cap9
2333
2334at91rm9200dk_config	:	unconfig
2335	@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
2336
2337cmc_pu2_config	:	unconfig
2338	@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
2339
2340csb637_config	:	unconfig
2341	@$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
2342
2343mp2usb_config	:	unconfig
2344	@$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
2345
2346m501sk_config	:	unconfig
2347	@$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200
2348
2349########################################################################
2350## ARM Integrator boards - see doc/README-integrator for more info.
2351integratorap_config	\
2352ap_config		\
2353ap966_config		\
2354ap922_config		\
2355ap922_XA10_config	\
2356ap7_config		\
2357ap720t_config		\
2358ap920t_config		\
2359ap926ejs_config		\
2360ap946es_config: unconfig
2361	@board/integratorap/split_by_variant.sh $@
2362
2363integratorcp_config	\
2364cp_config		\
2365cp920t_config		\
2366cp926ejs_config		\
2367cp946es_config		\
2368cp1136_config		\
2369cp966_config		\
2370cp922_config		\
2371cp922_XA10_config	\
2372cp1026_config: unconfig
2373	@board/integratorcp/split_by_variant.sh $@
2374
2375kb9202_config	:	unconfig
2376	@$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
2377
2378lpd7a400_config \
2379lpd7a404_config:	unconfig
2380	@$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
2381
2382mx1ads_config	:	unconfig
2383	@$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
2384
2385mx1fs2_config	:	unconfig
2386	@$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx
2387
2388netstar_config:		unconfig
2389	@$(MKCONFIG) $(@:_config=) arm arm925t netstar
2390
2391omap1510inn_config :	unconfig
2392	@$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn
2393
2394omap5912osk_config :	unconfig
2395	@$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap
2396
2397davinci_dvevm_config :	unconfig
2398	@$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davinci
2399
2400davinci_schmoogie_config :	unconfig
2401	@$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
2402
2403davinci_sonata_config :	unconfig
2404	@$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
2405
2406omap1610inn_config \
2407omap1610inn_cs0boot_config \
2408omap1610inn_cs3boot_config \
2409omap1610inn_cs_autoboot_config \
2410omap1610h2_config \
2411omap1610h2_cs0boot_config \
2412omap1610h2_cs3boot_config \
2413omap1610h2_cs_autoboot_config:	unconfig
2414	@mkdir -p $(obj)include
2415	@if [ "$(findstring _cs0boot_, $@)" ] ; then \
2416		echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
2417		$(XECHO) "... configured for CS0 boot"; \
2418	elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
2419		echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
2420		$(XECHO) "... configured for CS_AUTO boot"; \
2421	else \
2422		echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
2423		$(XECHO) "... configured for CS3 boot"; \
2424	fi;
2425	@$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
2426
2427omap730p2_config \
2428omap730p2_cs0boot_config \
2429omap730p2_cs3boot_config :	unconfig
2430	@mkdir -p $(obj)include
2431	@if [ "$(findstring _cs0boot_, $@)" ] ; then \
2432		echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
2433		$(XECHO) "... configured for CS0 boot"; \
2434	else \
2435		echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
2436		$(XECHO) "... configured for CS3 boot"; \
2437	fi;
2438	@$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap
2439
2440sbc2410x_config: unconfig
2441	@$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
2442
2443scb9328_config	:	unconfig
2444	@$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
2445
2446smdk2400_config	:	unconfig
2447	@$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0
2448
2449smdk2410_config	:	unconfig
2450	@$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
2451
2452SX1_config :		unconfig
2453	@$(MKCONFIG) $(@:_config=) arm arm925t sx1
2454
2455# TRAB default configuration:	8 MB Flash, 32 MB RAM
2456trab_config \
2457trab_bigram_config \
2458trab_bigflash_config \
2459trab_old_config:	unconfig
2460	@mkdir -p $(obj)include
2461	@mkdir -p $(obj)board/trab
2462	@ >$(obj)include/config.h
2463	@[ -z "$(findstring _bigram,$@)" ] || \
2464		{ echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
2465		  echo "#define CONFIG_RAM_32MB"   >>$(obj)include/config.h ; \
2466		  $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \
2467		}
2468	@[ -z "$(findstring _bigflash,$@)" ] || \
2469		{ echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
2470		  echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
2471		  $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \
2472		  echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
2473		}
2474	@[ -z "$(findstring _old,$@)" ] || \
2475		{ echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
2476		  echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
2477		  $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \
2478		  echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
2479		}
2480	@$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
2481
2482VCMA9_config	:	unconfig
2483	@$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
2484
2485#========================================================================
2486# ARM supplied Versatile development boards
2487#========================================================================
2488versatile_config	\
2489versatileab_config	\
2490versatilepb_config :	unconfig
2491	@board/versatile/split_by_variant.sh $@
2492
2493voiceblue_config:	unconfig
2494	@$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
2495
2496cm4008_config	:	unconfig
2497	@$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
2498
2499cm41xx_config	:	unconfig
2500	@$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
2501
2502gth2_config		:	unconfig
2503	@mkdir -p $(obj)include
2504	@ >$(obj)include/config.h
2505	@echo "#define CONFIG_GTH2 1" >>$(obj)include/config.h
2506	@$(MKCONFIG) -a gth2 mips mips gth2
2507
2508#########################################################################
2509## S3C44B0 Systems
2510#########################################################################
2511
2512B2_config	:	unconfig
2513	@$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave
2514
2515#########################################################################
2516## ARM720T Systems
2517#########################################################################
2518
2519armadillo_config:	unconfig
2520	@$(MKCONFIG) $(@:_config=) arm arm720t armadillo
2521
2522ep7312_config	:	unconfig
2523	@$(MKCONFIG) $(@:_config=) arm arm720t ep7312
2524
2525impa7_config	:	unconfig
2526	@$(MKCONFIG) $(@:_config=) arm arm720t impa7
2527
2528modnet50_config :	unconfig
2529	@$(MKCONFIG) $(@:_config=) arm arm720t modnet50
2530
2531evb4510_config :	unconfig
2532	@$(MKCONFIG) $(@:_config=) arm arm720t evb4510
2533
2534lpc2292sodimm_config:	unconfig
2535	@$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
2536
2537SMN42_config	:	unconfig
2538	@$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
2539
2540#########################################################################
2541## XScale Systems
2542#########################################################################
2543
2544actux1_config	:	unconfig
2545	@$(MKCONFIG) $(@:_config=) arm ixp actux1
2546
2547actux2_config	:	unconfig
2548	@$(MKCONFIG) $(@:_config=) arm ixp actux2
2549
2550actux3_config	:	unconfig
2551	@$(MKCONFIG) $(@:_config=) arm ixp actux3
2552
2553actux4_config	:	unconfig
2554	@$(MKCONFIG) $(@:_config=) arm ixp actux4
2555
2556adsvix_config	:	unconfig
2557	@$(MKCONFIG) $(@:_config=) arm pxa adsvix
2558
2559cerf250_config :	unconfig
2560	@$(MKCONFIG) $(@:_config=) arm pxa cerf250
2561
2562cradle_config	:	unconfig
2563	@$(MKCONFIG) $(@:_config=) arm pxa cradle
2564
2565csb226_config	:	unconfig
2566	@$(MKCONFIG) $(@:_config=) arm pxa csb226
2567
2568delta_config :	unconfig
2569	@$(MKCONFIG) $(@:_config=) arm pxa delta
2570
2571innokom_config	:	unconfig
2572	@$(MKCONFIG) $(@:_config=) arm pxa innokom
2573
2574ixdp425_config	:	unconfig
2575	@$(MKCONFIG) $(@:_config=) arm ixp ixdp425
2576
2577ixdpg425_config	:	unconfig
2578	@$(MKCONFIG) $(@:_config=) arm ixp ixdp425
2579
2580lubbock_config	:	unconfig
2581	@$(MKCONFIG) $(@:_config=) arm pxa lubbock
2582
2583pleb2_config	:	unconfig
2584	@$(MKCONFIG) $(@:_config=) arm pxa pleb2
2585
2586logodl_config	:	unconfig
2587	@$(MKCONFIG) $(@:_config=) arm pxa logodl
2588
2589pdnb3_config \
2590scpu_config:    unconfig
2591	@mkdir -p $(obj)include
2592	@if [ "$(findstring scpu_,$@)" ] ; then \
2593		echo "#define CONFIG_SCPU"      >>$(obj)include/config.h ; \
2594		$(XECHO) "... on SCPU board variant" ; \
2595	else \
2596		>$(obj)include/config.h ; \
2597	fi
2598	@$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
2599
2600pxa255_idp_config:	unconfig
2601	@$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
2602
2603trizepsiv_config	:	unconfig
2604	@$(MKCONFIG) $(@:_config=) arm pxa trizepsiv
2605
2606wepep250_config	:	unconfig
2607	@$(MKCONFIG) $(@:_config=) arm pxa wepep250
2608
2609xaeniax_config	:	unconfig
2610	@$(MKCONFIG) $(@:_config=) arm pxa xaeniax
2611
2612xm250_config	:	unconfig
2613	@$(MKCONFIG) $(@:_config=) arm pxa xm250
2614
2615xsengine_config :	unconfig
2616	@$(MKCONFIG) $(@:_config=) arm pxa xsengine
2617
2618zylonite_config :
2619	@$(MKCONFIG) $(@:_config=) arm pxa zylonite
2620
2621#########################################################################
2622## ARM1136 Systems
2623#########################################################################
2624omap2420h4_config	: unconfig
2625	@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4
2626
2627apollon_config		: unconfig
2628	@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
2629	@$(MKCONFIG) $(@:_config=) arm arm1136 apollon
2630	@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
2631
2632#========================================================================
2633# i386
2634#========================================================================
2635#########################################################################
2636## AMD SC520 CDP
2637#########################################################################
2638sc520_cdp_config	:	unconfig
2639	@$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp
2640
2641sc520_spunk_config	:	unconfig
2642	@$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk
2643
2644sc520_spunk_rel_config	:	unconfig
2645	@$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk
2646
2647#========================================================================
2648# MIPS
2649#========================================================================
2650#########################################################################
2651## MIPS32 4Kc
2652#########################################################################
2653
2654xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
2655
2656incaip_100MHz_config	\
2657incaip_133MHz_config	\
2658incaip_150MHz_config	\
2659incaip_config: unconfig
2660	@mkdir -p $(obj)include
2661	@ >$(obj)include/config.h
2662	@[ -z "$(findstring _100MHz,$@)" ] || \
2663		{ echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
2664		  $(XECHO) "... with 100MHz system clock" ; \
2665		}
2666	@[ -z "$(findstring _133MHz,$@)" ] || \
2667		{ echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
2668		  $(XECHO) "... with 133MHz system clock" ; \
2669		}
2670	@[ -z "$(findstring _150MHz,$@)" ] || \
2671		{ echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
2672		  $(XECHO) "... with 150MHz system clock" ; \
2673		}
2674	@$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
2675
2676tb0229_config: unconfig
2677	@$(MKCONFIG) $(@:_config=) mips mips tb0229
2678
2679#########################################################################
2680## MIPS32 AU1X00
2681#########################################################################
2682dbau1000_config		:	unconfig
2683	@mkdir -p $(obj)include
2684	@ >$(obj)include/config.h
2685	@echo "#define CONFIG_DBAU1000 1" >>$(obj)include/config.h
2686	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
2687
2688dbau1100_config		:	unconfig
2689	@mkdir -p $(obj)include
2690	@ >$(obj)include/config.h
2691	@echo "#define CONFIG_DBAU1100 1" >>$(obj)include/config.h
2692	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
2693
2694dbau1500_config		:	unconfig
2695	@mkdir -p $(obj)include
2696	@ >$(obj)include/config.h
2697	@echo "#define CONFIG_DBAU1500 1" >>$(obj)include/config.h
2698	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
2699
2700dbau1550_config		:	unconfig
2701	@mkdir -p $(obj)include
2702	@ >$(obj)include/config.h
2703	@echo "#define CONFIG_DBAU1550 1" >>$(obj)include/config.h
2704	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
2705
2706dbau1550_el_config	:	unconfig
2707	@mkdir -p $(obj)include
2708	@ >$(obj)include/config.h
2709	@echo "#define CONFIG_DBAU1550 1" >>$(obj)include/config.h
2710	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
2711
2712pb1000_config		:	unconfig
2713	@mkdir -p $(obj)include
2714	@ >$(obj)include/config.h
2715	@echo "#define CONFIG_PB1000 1" >>$(obj)include/config.h
2716	@$(MKCONFIG) -a pb1x00 mips mips pb1x00
2717
2718qemu_mips_config: unconfig
2719	@mkdir -p $(obj)include
2720	@ >$(obj)include/config.h
2721	@echo "#define CONFIG_QEMU_MIPS 1" >>$(obj)include/config.h
2722	@$(MKCONFIG) -a qemu-mips mips mips qemu-mips
2723
2724#########################################################################
2725## MIPS64 5Kc
2726#########################################################################
2727
2728purple_config :		unconfig
2729	@$(MKCONFIG) $(@:_config=) mips mips purple
2730
2731#========================================================================
2732# Nios
2733#========================================================================
2734#########################################################################
2735## Nios32
2736#########################################################################
2737
2738DK1C20_safe_32_config		\
2739DK1C20_standard_32_config	\
2740DK1C20_config:	unconfig
2741	@mkdir -p $(obj)include
2742	@ >$(obj)include/config.h
2743	@[ -z "$(findstring _safe_32,$@)" ] || \
2744		{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
2745		  $(XECHO) "... NIOS 'safe_32' configuration" ; \
2746		}
2747	@[ -z "$(findstring _standard_32,$@)" ] || \
2748		{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
2749		  $(XECHO) "... NIOS 'standard_32' configuration" ; \
2750		}
2751	@[ -z "$(findstring DK1C20_config,$@)" ] || \
2752		{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
2753		  $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
2754		}
2755	@$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
2756
2757DK1S10_safe_32_config		\
2758DK1S10_standard_32_config	\
2759DK1S10_mtx_ldk_20_config	\
2760DK1S10_config:	unconfig
2761	@mkdir -p $(obj)include
2762	@ >$(obj)include/config.h
2763	@[ -z "$(findstring _safe_32,$@)" ] || \
2764		{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
2765		  $(XECHO) "... NIOS 'safe_32' configuration" ; \
2766		}
2767	@[ -z "$(findstring _standard_32,$@)" ] || \
2768		{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
2769		  $(XECHO) "... NIOS 'standard_32' configuration" ; \
2770		}
2771	@[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
2772		{ echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
2773		  $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \
2774		}
2775	@[ -z "$(findstring DK1S10_config,$@)" ] || \
2776		{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
2777		  $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
2778		}
2779	@$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
2780
2781ADNPESC1_DNPEVA2_base_32_config	\
2782ADNPESC1_base_32_config		\
2783ADNPESC1_config: unconfig
2784	@mkdir -p $(obj)include
2785	@ >$(obj)include/config.h
2786	@[ -z "$(findstring _DNPEVA2,$@)" ] || \
2787		{ echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
2788		  $(XECHO) "... DNP/EVA2 configuration" ; \
2789		}
2790	@[ -z "$(findstring _base_32,$@)" ] || \
2791		{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
2792		  $(XECHO) "... NIOS 'base_32' configuration" ; \
2793		}
2794	@[ -z "$(findstring ADNPESC1_config,$@)" ] || \
2795		{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
2796		  $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
2797		}
2798	@$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
2799
2800#########################################################################
2801## Nios-II
2802#########################################################################
2803
2804EP1C20_config : unconfig
2805	@$(MKCONFIG)  EP1C20 nios2 nios2 ep1c20 altera
2806
2807EP1S10_config : unconfig
2808	@$(MKCONFIG)  EP1S10 nios2 nios2 ep1s10 altera
2809
2810EP1S40_config : unconfig
2811	@$(MKCONFIG)  EP1S40 nios2 nios2 ep1s40 altera
2812
2813PK1C20_config : unconfig
2814	@$(MKCONFIG)  PK1C20 nios2 nios2 pk1c20 psyent
2815
2816PCI5441_config : unconfig
2817	@$(MKCONFIG)  PCI5441 nios2 nios2 pci5441 psyent
2818
2819#========================================================================
2820# MicroBlaze
2821#========================================================================
2822#########################################################################
2823## Microblaze
2824#########################################################################
2825suzaku_config:	unconfig
2826	@mkdir -p $(obj)include
2827	@ >$(obj)include/config.h
2828	@echo "#define CONFIG_SUZAKU 1" >> $(obj)include/config.h
2829	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
2830
2831ml401_config:	unconfig
2832	@mkdir -p $(obj)include
2833	@ >$(obj)include/config.h
2834	@echo "#define CONFIG_ML401 1" >> $(obj)include/config.h
2835	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx
2836
2837xupv2p_config:	unconfig
2838	@mkdir -p $(obj)include
2839	@ >$(obj)include/config.h
2840	@echo "#define CONFIG_XUPV2P 1" >> $(obj)include/config.h
2841	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx
2842
2843#========================================================================
2844# Blackfin
2845#========================================================================
2846
2847# Analog Devices boards
2848BFIN_BOARDS = bf533-ezkit bf533-stamp bf537-stamp bf561-ezkit
2849
2850$(BFIN_BOARDS:%=%_config)	: unconfig
2851	@$(MKCONFIG) $(@:_config=) blackfin $(firstword $(subst -, ,$@)) $(@:_config=)
2852
2853$(BFIN_BOARDS):
2854	$(MAKE) $@_config
2855	$(MAKE)
2856
2857#========================================================================
2858# AVR32
2859#========================================================================
2860#########################################################################
2861## AT32AP7xxx
2862#########################################################################
2863
2864atstk1002_config	:	unconfig
2865	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
2866
2867atstk1003_config	:	unconfig
2868	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
2869
2870atstk1004_config	:	unconfig
2871	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
2872
2873atngw100_config	:	unconfig
2874	@$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
2875
2876#########################################################################
2877#########################################################################
2878#########################################################################
2879
2880#########################################################################
2881## sh3 (Renesas SuperH)
2882#########################################################################
2883ms7720se_config: unconfig
2884	@ >include/config.h
2885	@echo "#define CONFIG_MS7720SE 1" >> include/config.h
2886	@$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se
2887
2888#########################################################################
2889## sh4 (Renesas SuperH)
2890#########################################################################
2891ms7750se_config: unconfig
2892	@ >$(obj)include/config.h
2893	@echo "#define CONFIG_MS7750SE 1" >> $(obj)include/config.h
2894	@$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se
2895
2896ms7722se_config :       unconfig
2897	@ >$(obj)include/config.h
2898	@echo "#define CONFIG_MS7722SE 1" >> $(obj)include/config.h
2899	@$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se
2900
2901#########################################################################
2902#########################################################################
2903#########################################################################
2904
2905clean:
2906	@find $(OBJTREE) -type f \
2907		\( -name 'core' -o -name '*.bak' -o -name '*~' \
2908		-o -name '*.o'  -o -name '*.a'  \) -print \
2909		| xargs rm -f
2910	@cd $(obj)examples/ && rm -f hello_world timer eepro100_eeprom sched \
2911	      mem_to_mem_idma2intr 82559_eeprom smc91111_eeprom interrupt \
2912	      test_burst
2913	@cd $(obj)tools/ && rm -f bmp_logo easylogo/easylogo \
2914		env/{fw_printenv,fw_setenv} envcrc gdb/{astest,gdbcont,gdbsend} \
2915		gen_eth_addr img2srec mkimage mpc86x_clk ncb ubsha1
2916	@cd $(obj)board/ && rm -f cray/L1/{bootscript.c,bootscript.image} \
2917		netstar/{eeprom,crcek,crcit,*.srec,*.bin} \
2918		trab/trab_fkt voiceblue/eeprom \
2919		{integratorap,integratorcp}/u-boot.lds integratorcp/u-boot.lds \
2920		{bf533-ezkit,bf533-stamp,bf537-stamp,bf561-ezkit}/u-boot.lds
2921	@rm -f $(obj)include/bmp_logo.h $(obj)nand_spl/{u-boot-spl,u-boot-spl.map}
2922	@cd $(obj)onenand_ipl/ && rm -f onenand-ipl onenand-ipl.bin \
2923		onenand-ipl-2k.bin onenand-ipl.map
2924	@rm -f $(obj)api_examples/demo $(VERSION_FILE)
2925
2926clobber:	clean
2927	@find $(OBJTREE) -type f \( -name .depend \
2928		-o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
2929		-print0 \
2930		| xargs -0 rm -f
2931	@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
2932		$(obj)cscope.* $(obj)*.*~
2933	@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
2934	@rm -f $(obj)tools/{crc32.c,environment.c,env/crc32.c,sha1.c,inca-swap-bytes}
2935	@rm -f $(obj)cpu/mpc824x/bedbug_603e.c
2936	@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
2937	@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -lname "*" -print | xargs rm -f
2938	@[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -lname "*" -print | xargs rm -f
2939	@[ ! -d $(obj)api_examples ] || find $(obj)api_examples -lname "*" -print | xargs rm -f
2940
2941ifeq ($(OBJTREE),$(SRCTREE))
2942mrproper \
2943distclean:	clobber unconfig
2944else
2945mrproper \
2946distclean:	clobber unconfig
2947	rm -rf $(obj)*
2948endif
2949
2950backup:
2951	F=`basename $(TOPDIR)` ; cd .. ; \
2952	gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
2953
2954#########################################################################
2955