1# 2# (C) Copyright 2000-2009 3# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4# 5# See file CREDITS for list of people who contributed to this 6# project. 7# 8# This program is free software; you can redistribute it and/or 9# modify it under the terms of the GNU General Public License as 10# published by the Free Software Foundatio; either version 2 of 11# the License, or (at your option) any later version. 12# 13# This program is distributed in the hope that it will be useful, 14# but WITHOUT ANY WARRANTY; without even the implied warranty of 15# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16# GNU General Public License for more details. 17# 18# You should have received a copy of the GNU General Public License 19# along with this program; if not, write to the Free Software 20# Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21# MA 02111-1307 USA 22# 23 24VERSION = 2009 25PATCHLEVEL = 08 26SUBLEVEL = 27EXTRAVERSION = 28ifneq "$(SUBLEVEL)" "" 29U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) 30else 31U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION) 32endif 33TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h 34VERSION_FILE = $(obj)include/version_autogenerated.h 35 36HOSTARCH := $(shell uname -m | \ 37 sed -e s/i.86/i386/ \ 38 -e s/sun4u/sparc64/ \ 39 -e s/arm.*/arm/ \ 40 -e s/sa110/arm/ \ 41 -e s/powerpc/ppc/ \ 42 -e s/ppc64/ppc/ \ 43 -e s/macppc/ppc/) 44 45HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ 46 sed -e 's/\(cygwin\).*/cygwin/') 47 48# Set shell to bash if possible, otherwise fall back to sh 49SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ 50 else if [ -x /bin/bash ]; then echo /bin/bash; \ 51 else echo sh; fi; fi) 52 53export HOSTARCH HOSTOS SHELL 54 55# Deal with colliding definitions from tcsh etc. 56VENDOR= 57 58######################################################################### 59# Allow for silent builds 60ifeq (,$(findstring s,$(MAKEFLAGS))) 61XECHO = echo 62else 63XECHO = : 64endif 65 66######################################################################### 67# 68# U-boot build supports producing a object files to the separate external 69# directory. Two use cases are supported: 70# 71# 1) Add O= to the make command line 72# 'make O=/tmp/build all' 73# 74# 2) Set environement variable BUILD_DIR to point to the desired location 75# 'export BUILD_DIR=/tmp/build' 76# 'make' 77# 78# The second approach can also be used with a MAKEALL script 79# 'export BUILD_DIR=/tmp/build' 80# './MAKEALL' 81# 82# Command line 'O=' setting overrides BUILD_DIR environent variable. 83# 84# When none of the above methods is used the local build is performed and 85# the object files are placed in the source directory. 86# 87 88ifdef O 89ifeq ("$(origin O)", "command line") 90BUILD_DIR := $(O) 91endif 92endif 93 94ifneq ($(BUILD_DIR),) 95saved-output := $(BUILD_DIR) 96 97# Attempt to create a output directory. 98$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR}) 99 100# Verify if it was successful. 101BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd) 102$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist)) 103endif # ifneq ($(BUILD_DIR),) 104 105OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR)) 106SRCTREE := $(CURDIR) 107TOPDIR := $(SRCTREE) 108LNDIR := $(OBJTREE) 109export TOPDIR SRCTREE OBJTREE 110 111MKCONFIG := $(SRCTREE)/mkconfig 112export MKCONFIG 113 114ifneq ($(OBJTREE),$(SRCTREE)) 115REMOTE_BUILD := 1 116export REMOTE_BUILD 117endif 118 119# $(obj) and (src) are defined in config.mk but here in main Makefile 120# we also need them before config.mk is included which is the case for 121# some targets like unconfig, clean, clobber, distclean, etc. 122ifneq ($(OBJTREE),$(SRCTREE)) 123obj := $(OBJTREE)/ 124src := $(SRCTREE)/ 125else 126obj := 127src := 128endif 129export obj src 130 131# Make sure CDPATH settings don't interfere 132unexport CDPATH 133 134######################################################################### 135 136ifeq ($(ARCH),powerpc) 137ARCH = ppc 138endif 139 140# The "tools" are needed early, so put this first 141# Don't include stuff already done in $(LIBS) 142SUBDIRS = tools \ 143 examples/standalone \ 144 examples/api 145 146.PHONY : $(SUBDIRS) 147 148ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk)) 149 150# Include autoconf.mk before config.mk so that the config options are available 151# to all top level build files. We need the dummy all: target to prevent the 152# dependency target in autoconf.mk.dep from being the default. 153all: 154sinclude $(obj)include/autoconf.mk.dep 155sinclude $(obj)include/autoconf.mk 156 157# load ARCH, BOARD, and CPU configuration 158include $(obj)include/config.mk 159export ARCH CPU BOARD VENDOR SOC 160 161# set default to nothing for native builds 162ifeq ($(HOSTARCH),$(ARCH)) 163CROSS_COMPILE ?= 164endif 165 166# load other configuration 167include $(TOPDIR)/config.mk 168 169######################################################################### 170# U-Boot objects....order is important (i.e. start must be first) 171 172OBJS = cpu/$(CPU)/start.o 173ifeq ($(CPU),i386) 174OBJS += cpu/$(CPU)/start16.o 175OBJS += cpu/$(CPU)/resetvec.o 176endif 177ifeq ($(CPU),ppc4xx) 178OBJS += cpu/$(CPU)/resetvec.o 179endif 180ifeq ($(CPU),mpc85xx) 181OBJS += cpu/$(CPU)/resetvec.o 182endif 183 184OBJS := $(addprefix $(obj),$(OBJS)) 185 186LIBS = lib_generic/libgeneric.a 187LIBS += lib_generic/lzma/liblzma.a 188LIBS += lib_generic/lzo/liblzo.a 189LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \ 190 "board/$(VENDOR)/common/lib$(VENDOR).a"; fi) 191LIBS += cpu/$(CPU)/lib$(CPU).a 192ifdef SOC 193LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a 194endif 195ifeq ($(CPU),ixp) 196LIBS += cpu/ixp/npe/libnpe.a 197endif 198LIBS += lib_$(ARCH)/lib$(ARCH).a 199LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \ 200 fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \ 201 fs/ubifs/libubifs.a 202LIBS += net/libnet.a 203LIBS += disk/libdisk.a 204LIBS += drivers/bios_emulator/libatibiosemu.a 205LIBS += drivers/block/libblock.a 206LIBS += drivers/dma/libdma.a 207LIBS += drivers/fpga/libfpga.a 208LIBS += drivers/gpio/libgpio.a 209LIBS += drivers/hwmon/libhwmon.a 210LIBS += drivers/i2c/libi2c.a 211LIBS += drivers/input/libinput.a 212LIBS += drivers/misc/libmisc.a 213LIBS += drivers/mmc/libmmc.a 214LIBS += drivers/mtd/libmtd.a 215LIBS += drivers/mtd/nand/libnand.a 216LIBS += drivers/mtd/onenand/libonenand.a 217LIBS += drivers/mtd/ubi/libubi.a 218LIBS += drivers/mtd/spi/libspi_flash.a 219LIBS += drivers/net/libnet.a 220LIBS += drivers/net/phy/libphy.a 221LIBS += drivers/net/sk98lin/libsk98lin.a 222LIBS += drivers/pci/libpci.a 223LIBS += drivers/pcmcia/libpcmcia.a 224LIBS += drivers/power/libpower.a 225LIBS += drivers/spi/libspi.a 226ifeq ($(CPU),mpc83xx) 227LIBS += drivers/qe/qe.a 228endif 229ifeq ($(CPU),mpc85xx) 230LIBS += drivers/qe/qe.a 231LIBS += cpu/mpc8xxx/ddr/libddr.a 232LIBS += cpu/mpc8xxx/lib8xxx.a 233TAG_SUBDIRS += cpu/mpc8xxx 234endif 235ifeq ($(CPU),mpc86xx) 236LIBS += cpu/mpc8xxx/ddr/libddr.a 237LIBS += cpu/mpc8xxx/lib8xxx.a 238TAG_SUBDIRS += cpu/mpc8xxx 239endif 240LIBS += drivers/rtc/librtc.a 241LIBS += drivers/serial/libserial.a 242LIBS += drivers/twserial/libtws.a 243LIBS += drivers/usb/gadget/libusb_gadget.a 244LIBS += drivers/usb/host/libusb_host.a 245LIBS += drivers/usb/musb/libusb_musb.a 246LIBS += drivers/video/libvideo.a 247LIBS += drivers/watchdog/libwatchdog.a 248LIBS += common/libcommon.a 249LIBS += libfdt/libfdt.a 250LIBS += api/libapi.a 251LIBS += post/libpost.a 252 253LIBS := $(addprefix $(obj),$(LIBS)) 254.PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE) 255 256LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a 257LIBBOARD := $(addprefix $(obj),$(LIBBOARD)) 258 259# Add GCC lib 260ifdef USE_PRIVATE_LIBGCC 261ifeq ("$(USE_PRIVATE_LIBGCC)", "yes") 262PLATFORM_LIBGCC = -L $(OBJTREE)/lib_$(ARCH) -lgcc 263else 264PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc 265endif 266else 267PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc 268endif 269PLATFORM_LIBS += $(PLATFORM_LIBGCC) 270export PLATFORM_LIBS 271 272# Special flags for CPP when processing the linker script. 273# Pass the version down so we can handle backwards compatibility 274# on the fly. 275LDPPFLAGS += \ 276 -include $(TOPDIR)/include/u-boot/u-boot.lds.h \ 277 $(shell $(LD) --version | \ 278 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') 279 280ifeq ($(CONFIG_NAND_U_BOOT),y) 281NAND_SPL = nand_spl 282U_BOOT_NAND = $(obj)u-boot-nand.bin 283endif 284 285ifeq ($(CONFIG_ONENAND_U_BOOT),y) 286ONENAND_IPL = onenand_ipl 287U_BOOT_ONENAND = $(obj)u-boot-onenand.bin 288endif 289 290__OBJS := $(subst $(obj),,$(OBJS)) 291__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD)) 292 293######################################################################### 294######################################################################### 295 296# Always append ALL so that arch config.mk's can add custom ones 297ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND) 298 299all: $(ALL) 300 301$(obj)u-boot.hex: $(obj)u-boot 302 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ 303 304$(obj)u-boot.srec: $(obj)u-boot 305 $(OBJCOPY) -O srec $< $@ 306 307$(obj)u-boot.bin: $(obj)u-boot 308 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ 309 310$(obj)u-boot.ldr: $(obj)u-boot 311 $(obj)tools/envcrc --binary > $(obj)env-ldr.o 312 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS) 313 314$(obj)u-boot.ldr.hex: $(obj)u-boot.ldr 315 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary 316 317$(obj)u-boot.ldr.srec: $(obj)u-boot.ldr 318 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary 319 320$(obj)u-boot.img: $(obj)u-boot.bin 321 ./tools/mkimage -A $(ARCH) -T firmware -C none \ 322 -a $(TEXT_BASE) -e 0 \ 323 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ 324 sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ 325 -d $< $@ 326 327$(obj)u-boot.kwb: $(obj)u-boot.bin 328 $(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \ 329 -a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@ 330 331$(obj)u-boot.sha1: $(obj)u-boot.bin 332 $(obj)tools/ubsha1 $(obj)u-boot.bin 333 334$(obj)u-boot.dis: $(obj)u-boot 335 $(OBJDUMP) -d $< > $@ 336 337GEN_UBOOT = \ 338 UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ 339 sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ 340 cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ 341 --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ 342 -Map u-boot.map -o u-boot 343$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds 344 $(GEN_UBOOT) 345ifeq ($(CONFIG_KALLSYMS),y) 346 smap=`$(call SYSTEM_MAP,u-boot) | \ 347 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ 348 $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \ 349 -c common/system_map.c -o $(obj)common/system_map.o 350 $(GEN_UBOOT) $(obj)common/system_map.o 351endif 352 353$(OBJS): depend 354 $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@)) 355 356$(LIBS): depend $(SUBDIRS) 357 $(MAKE) -C $(dir $(subst $(obj),,$@)) 358 359$(LIBBOARD): depend $(LIBS) 360 $(MAKE) -C $(dir $(subst $(obj),,$@)) 361 362$(SUBDIRS): depend 363 $(MAKE) -C $@ all 364 365$(LDSCRIPT): depend 366 $(MAKE) -C $(dir $@) $(notdir $@) 367 368$(obj)u-boot.lds: $(LDSCRIPT) 369 $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ 370 371$(NAND_SPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk 372 $(MAKE) -C nand_spl/board/$(BOARDDIR) all 373 374$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin 375 cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin 376 377$(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk 378 $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all 379 380$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin 381 cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin 382 cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin 383 384$(VERSION_FILE): 385 @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \ 386 '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp 387 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@ 388 389$(TIMESTAMP_FILE): 390 @date +'#define U_BOOT_DATE "%b %d %C%y"' > $@ 391 @date +'#define U_BOOT_TIME "%T"' >> $@ 392 393gdbtools: 394 $(MAKE) -C tools/gdb all || exit 1 395 396updater: 397 $(MAKE) -C tools/updater all || exit 1 398 399env: 400 $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1 401 402depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk 403 for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done 404 405TAG_SUBDIRS += include 406TAG_SUBDIRS += lib_generic board/$(BOARDDIR) 407TAG_SUBDIRS += cpu/$(CPU) 408TAG_SUBDIRS += lib_$(ARCH) 409TAG_SUBDIRS += fs/cramfs 410TAG_SUBDIRS += fs/fat 411TAG_SUBDIRS += fs/fdos 412TAG_SUBDIRS += fs/jffs2 413TAG_SUBDIRS += fs/yaffs2 414TAG_SUBDIRS += net 415TAG_SUBDIRS += disk 416TAG_SUBDIRS += common 417TAG_SUBDIRS += drivers/bios_emulator 418TAG_SUBDIRS += drivers/block 419TAG_SUBDIRS += drivers/gpio 420TAG_SUBDIRS += drivers/hwmon 421TAG_SUBDIRS += drivers/i2c 422TAG_SUBDIRS += drivers/input 423TAG_SUBDIRS += drivers/misc 424TAG_SUBDIRS += drivers/mmc 425TAG_SUBDIRS += drivers/mtd 426TAG_SUBDIRS += drivers/mtd/nand 427TAG_SUBDIRS += drivers/mtd/onenand 428TAG_SUBDIRS += drivers/mtd/spi 429TAG_SUBDIRS += drivers/net 430TAG_SUBDIRS += drivers/net/sk98lin 431TAG_SUBDIRS += drivers/pci 432TAG_SUBDIRS += drivers/pcmcia 433TAG_SUBDIRS += drivers/qe 434TAG_SUBDIRS += drivers/rtc 435TAG_SUBDIRS += drivers/serial 436TAG_SUBDIRS += drivers/spi 437TAG_SUBDIRS += drivers/usb 438TAG_SUBDIRS += drivers/video 439 440tags ctags: 441 ctags -w -o $(obj)ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \ 442 -name '*.[ch]' -print` 443 444etags: 445 etags -a -o $(obj)etags `find $(SUBDIRS) $(TAG_SUBDIRS) \ 446 -name '*.[ch]' -print` 447cscope: 448 find $(SUBDIRS) $(TAG_SUBDIRS) -name '*.[ch]' -print \ 449 > cscope.files 450 cscope -b -q -k 451 452SYSTEM_MAP = \ 453 $(NM) $1 | \ 454 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ 455 LC_ALL=C sort 456$(obj)System.map: $(obj)u-boot 457 @$(call SYSTEM_MAP,$<) > $(obj)System.map 458 459# 460# Auto-generate the autoconf.mk file (which is included by all makefiles) 461# 462# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep. 463# the dep file is only include in this top level makefile to determine when 464# to regenerate the autoconf.mk file. 465$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h 466 @$(XECHO) Generating $@ ; \ 467 set -e ; \ 468 : Generate the dependancies ; \ 469 $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \ 470 -MQ $(obj)include/autoconf.mk include/common.h > $@ 471 472$(obj)include/autoconf.mk: $(obj)include/config.h 473 @$(XECHO) Generating $@ ; \ 474 set -e ; \ 475 : Extract the config macros ; \ 476 $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ 477 sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ 478 mv $@.tmp $@ 479 480######################################################################### 481else # !config.mk 482all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \ 483$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \ 484$(SUBDIRS) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools updater env depend \ 485dep tags ctags etags cscope $(obj)System.map: 486 @echo "System not configured - see README" >&2 487 @ exit 1 488endif # config.mk 489 490.PHONY : CHANGELOG 491CHANGELOG: 492 git log --no-merges U-Boot-1_1_5.. | \ 493 unexpand -a | sed -e 's/\s\s*$$//' > $@ 494 495include/license.h: tools/bin2header COPYING 496 cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h 497######################################################################### 498 499unconfig: 500 @rm -f $(obj)include/config.h $(obj)include/config.mk \ 501 $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \ 502 $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep 503 504#======================================================================== 505# PowerPC 506#======================================================================== 507 508######################################################################### 509## MPC5xx Systems 510######################################################################### 511 512canmb_config: unconfig 513 @$(MKCONFIG) -a canmb ppc mpc5xxx canmb 514 515cmi_mpc5xx_config: unconfig 516 @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi 517 518PATI_config: unconfig 519 @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl 520 521######################################################################### 522## MPC5xxx Systems 523######################################################################### 524 525aev_config: unconfig 526 @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc 527 528BC3450_config: unconfig 529 @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450 530 531cm5200_config: unconfig 532 @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200 533 534cpci5200_config: unconfig 535 @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd 536 537digsy_mtc_config \ 538digsy_mtc_LOWBOOT_config \ 539digsy_mtc_RAMBOOT_config: unconfig 540 @mkdir -p $(obj)include 541 @mkdir -p $(obj)board/digsy_mtc 542 @ >$(obj)include/config.h 543 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 544 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \ 545 echo "... with LOWBOOT configuration" ; \ 546 } 547 @[ -z "$(findstring RAMBOOT_,$@)" ] || \ 548 { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \ 549 echo "... with RAMBOOT configuration" ; \ 550 } 551 @$(MKCONFIG) -a digsy_mtc ppc mpc5xxx digsy_mtc 552 553galaxy5200_LOWBOOT_config \ 554galaxy5200_config: unconfig 555 @mkdir -p $(obj)include 556 @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 557 @$(MKCONFIG) -a galaxy5200 ppc mpc5xxx galaxy5200 558 559hmi1001_config: unconfig 560 @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001 561 562Lite5200_config \ 563Lite5200_LOWBOOT_config \ 564Lite5200_LOWBOOT08_config \ 565icecube_5200_config \ 566icecube_5200_LOWBOOT_config \ 567icecube_5200_LOWBOOT08_config \ 568icecube_5200_DDR_config \ 569icecube_5200_DDR_LOWBOOT_config \ 570icecube_5200_DDR_LOWBOOT08_config \ 571icecube_5100_config: unconfig 572 @mkdir -p $(obj)include 573 @mkdir -p $(obj)board/icecube 574 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 575 { if [ "$(findstring DDR,$@)" ] ; \ 576 then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ 577 else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ 578 fi ; \ 579 $(XECHO) "... with LOWBOOT configuration" ; \ 580 } 581 @[ -z "$(findstring LOWBOOT08,$@)" ] || \ 582 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ 583 echo "... with 8 MB flash only" ; \ 584 $(XECHO) "... with LOWBOOT configuration" ; \ 585 } 586 @[ -z "$(findstring DDR,$@)" ] || \ 587 { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ 588 $(XECHO) "... DDR memory revision" ; \ 589 } 590 @[ -z "$(findstring 5200,$@)" ] || \ 591 { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ 592 $(XECHO) "... with MPC5200 processor" ; \ 593 } 594 @[ -z "$(findstring 5100,$@)" ] || \ 595 { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ 596 $(XECHO) "... with MGT5100 processor" ; \ 597 } 598 @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube 599 600jupiter_config: unconfig 601 @$(MKCONFIG) jupiter ppc mpc5xxx jupiter 602 603inka4x0_config: unconfig 604 @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 605 606lite5200b_config \ 607lite5200b_PM_config \ 608lite5200b_LOWBOOT_config: unconfig 609 @mkdir -p $(obj)include 610 @mkdir -p $(obj)board/icecube 611 @ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h 612 @ $(XECHO) "... DDR memory revision" 613 @ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h 614 @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h 615 @[ -z "$(findstring _PM_,$@)" ] || \ 616 { echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \ 617 $(XECHO) "... with power management (low-power mode) support" ; \ 618 } 619 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 620 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ 621 $(XECHO) "... with LOWBOOT configuration" ; \ 622 } 623 @ $(XECHO) "... with MPC5200B processor" 624 @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube 625 626mcc200_config \ 627mcc200_SDRAM_config \ 628mcc200_highboot_config \ 629mcc200_COM12_config \ 630mcc200_COM12_SDRAM_config \ 631mcc200_COM12_highboot_config \ 632mcc200_COM12_highboot_SDRAM_config \ 633mcc200_highboot_SDRAM_config \ 634prs200_config \ 635prs200_DDR_config \ 636prs200_highboot_config \ 637prs200_highboot_DDR_config: unconfig 638 @mkdir -p $(obj)include 639 @mkdir -p $(obj)board/mcc200 640 @[ -n "$(findstring highboot,$@)" ] || \ 641 { $(XECHO) "... with lowboot configuration" ; \ 642 } 643 @[ -z "$(findstring highboot,$@)" ] || \ 644 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \ 645 $(XECHO) "... with highboot configuration" ; \ 646 } 647 @[ -n "$(findstring _SDRAM,$@)" ] || \ 648 { if [ -n "$(findstring mcc200,$@)" ]; \ 649 then \ 650 $(XECHO) "... with DDR" ; \ 651 else \ 652 if [ -n "$(findstring _DDR,$@)" ];\ 653 then \ 654 $(XECHO) "... with DDR" ; \ 655 else \ 656 echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\ 657 $(XECHO) "... with SDRAM" ; \ 658 fi; \ 659 fi; \ 660 } 661 @[ -z "$(findstring _SDRAM,$@)" ] || \ 662 { echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \ 663 $(XECHO) "... with SDRAM" ; \ 664 } 665 @[ -z "$(findstring COM12,$@)" ] || \ 666 { echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \ 667 $(XECHO) "... with console on COM12" ; \ 668 } 669 @[ -z "$(findstring prs200,$@)" ] || \ 670 { echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\ 671 } 672 @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200 673 674mecp5200_config: unconfig 675 @$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esd 676 677motionpro_config: unconfig 678 @$(MKCONFIG) motionpro ppc mpc5xxx motionpro 679 680mucmc52_config: unconfig 681 @$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52 682 683munices_config: unconfig 684 @$(MKCONFIG) munices ppc mpc5xxx munices 685 686MVBC_P_config: unconfig 687 @mkdir -p $(obj)include 688 @mkdir -p $(obj)board/mvbc_p 689 @ >$(obj)include/config.h 690 @[ -z "$(findstring MVBC_P,$@)" ] || \ 691 { echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; } 692 @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision 693 694o2dnt_config: unconfig 695 @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt 696 697pcm030_config \ 698pcm030_LOWBOOT_config: unconfig 699 @mkdir -p $(obj)include $(obj)board/phytec/pcm030 700 @ >$(obj)include/config.h 701 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 702 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \ 703 echo "... with LOWBOOT configuration" ; \ 704 } 705 @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec 706 707pf5200_config: unconfig 708 @$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd 709 710PM520_config \ 711PM520_DDR_config \ 712PM520_ROMBOOT_config \ 713PM520_ROMBOOT_DDR_config: unconfig 714 @mkdir -p $(obj)include 715 @[ -z "$(findstring DDR,$@)" ] || \ 716 { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ 717 $(XECHO) "... DDR memory revision" ; \ 718 } 719 @[ -z "$(findstring ROMBOOT,$@)" ] || \ 720 { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 721 $(XECHO) "... booting from 8-bit flash" ; \ 722 } 723 @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520 724 725smmaco4_config: unconfig 726 @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc 727 728spieval_config: unconfig 729 @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc 730 731TB5200_B_config \ 732TB5200_config: unconfig 733 @mkdir -p $(obj)include 734 @[ -z "$(findstring _B,$@)" ] || \ 735 { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 736 $(XECHO) "... with MPC5200B processor" ; \ 737 } 738 @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc 739 740MINI5200_config \ 741EVAL5200_config \ 742TOP5200_config: unconfig 743 @mkdir -p $(obj)include 744 @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 745 @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk 746 747Total5100_config \ 748Total5200_config \ 749Total5200_lowboot_config \ 750Total5200_Rev2_config \ 751Total5200_Rev2_lowboot_config: unconfig 752 @mkdir -p $(obj)include 753 @mkdir -p $(obj)board/total5200 754 @[ -z "$(findstring 5100,$@)" ] || \ 755 { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ 756 $(XECHO) "... with MGT5100 processor" ; \ 757 } 758 @[ -z "$(findstring 5200,$@)" ] || \ 759 { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ 760 $(XECHO) "... with MPC5200 processor" ; \ 761 } 762 @[ -n "$(findstring Rev,$@)" ] || \ 763 { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \ 764 $(XECHO) "... revision 1 board" ; \ 765 } 766 @[ -z "$(findstring Rev2_,$@)" ] || \ 767 { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \ 768 $(XECHO) "... revision 2 board" ; \ 769 } 770 @[ -z "$(findstring lowboot_,$@)" ] || \ 771 { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \ 772 $(XECHO) "... with lowboot configuration" ; \ 773 } 774 @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200 775 776cam5200_config \ 777cam5200_niosflash_config \ 778fo300_config \ 779MiniFAP_config \ 780TQM5200S_config \ 781TQM5200S_HIGHBOOT_config \ 782TQM5200_B_config \ 783TQM5200_B_HIGHBOOT_config \ 784TQM5200_config \ 785TQM5200_STK100_config: unconfig 786 @mkdir -p $(obj)include 787 @mkdir -p $(obj)board/tqc/tqm5200 788 @[ -z "$(findstring cam5200,$@)" ] || \ 789 { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \ 790 echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ 791 echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 792 $(XECHO) "... TQM5200S on Cam5200" ; \ 793 } 794 @[ -z "$(findstring niosflash,$@)" ] || \ 795 { echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \ 796 $(XECHO) "... with NIOS flash driver" ; \ 797 } 798 @[ -z "$(findstring fo300,$@)" ] || \ 799 { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \ 800 $(XECHO) "... TQM5200 on FO300" ; \ 801 } 802 @[ -z "$(findstring MiniFAP,$@)" ] || \ 803 { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \ 804 $(XECHO) "... TQM5200_AC on MiniFAP" ; \ 805 } 806 @[ -z "$(findstring STK100,$@)" ] || \ 807 { echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \ 808 $(XECHO) "... on a STK52XX.100 base board" ; \ 809 } 810 @[ -z "$(findstring TQM5200_B,$@)" ] || \ 811 { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 812 } 813 @[ -z "$(findstring TQM5200S,$@)" ] || \ 814 { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ 815 echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 816 } 817 @[ -z "$(findstring HIGHBOOT,$@)" ] || \ 818 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ 819 } 820 @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc 821 822uc101_config: unconfig 823 @$(MKCONFIG) uc101 ppc mpc5xxx uc101 824 825v38b_config: unconfig 826 @$(MKCONFIG) -a v38b ppc mpc5xxx v38b 827 828######################################################################### 829## MPC512x Systems 830######################################################################### 831 832aria_config: unconfig 833 @$(MKCONFIG) -a aria ppc mpc512x aria davedenx 834 835mecp5123_config: unconfig 836 @$(MKCONFIG) -a mecp5123 ppc mpc512x mecp5123 esd 837 838mpc5121ads_config \ 839mpc5121ads_rev2_config \ 840 : unconfig 841 @mkdir -p $(obj)include 842 @if [ "$(findstring rev2,$@)" ] ; then \ 843 echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \ 844 fi 845 @$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale 846 847######################################################################### 848## MPC8xx Systems 849######################################################################### 850 851Adder_config \ 852Adder87x_config \ 853AdderII_config \ 854 : unconfig 855 @mkdir -p $(obj)include 856 $(if $(findstring AdderII,$@), \ 857 @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) 858 @$(MKCONFIG) -a Adder ppc mpc8xx adder 859 860AdderUSB_config: unconfig 861 @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder 862 863ADS860_config \ 864FADS823_config \ 865FADS850SAR_config \ 866MPC86xADS_config \ 867MPC885ADS_config \ 868FADS860T_config: unconfig 869 @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads 870 871AMX860_config : unconfig 872 @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel 873 874c2mon_config: unconfig 875 @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon 876 877CCM_config: unconfig 878 @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens 879 880cogent_mpc8xx_config: unconfig 881 @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent 882 883ELPT860_config: unconfig 884 @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX 885 886EP88x_config: unconfig 887 @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x 888 889ESTEEM192E_config: unconfig 890 @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e 891 892ETX094_config : unconfig 893 @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094 894 895FLAGADM_config: unconfig 896 @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm 897 898xtract_GEN860T = $(subst _SC,,$(subst _config,,$1)) 899 900GEN860T_SC_config \ 901GEN860T_config: unconfig 902 @mkdir -p $(obj)include 903 @[ -z "$(findstring _SC,$@)" ] || \ 904 { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \ 905 $(XECHO) "With reduced H/W feature set (SC)..." ; \ 906 } 907 @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t 908 909GENIETV_config: unconfig 910 @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv 911 912GTH_config: unconfig 913 @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth 914 915hermes_config : unconfig 916 @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes 917 918HMI10_config : unconfig 919 @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc 920 921IAD210_config: unconfig 922 @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens 923 924xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) 925 926ICU862_100MHz_config \ 927ICU862_config: unconfig 928 @mkdir -p $(obj)include 929 @[ -z "$(findstring _100MHz,$@)" ] || \ 930 { echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \ 931 $(XECHO) "... with 100MHz system clock" ; \ 932 } 933 @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862 934 935IP860_config : unconfig 936 @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860 937 938IVML24_256_config \ 939IVML24_128_config \ 940IVML24_config: unconfig 941 @mkdir -p $(obj)include 942 @[ -z "$(findstring IVML24_config,$@)" ] || \ 943 { echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \ 944 } 945 @[ -z "$(findstring IVML24_128_config,$@)" ] || \ 946 { echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \ 947 } 948 @[ -z "$(findstring IVML24_256_config,$@)" ] || \ 949 { echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \ 950 } 951 @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm 952 953IVMS8_256_config \ 954IVMS8_128_config \ 955IVMS8_config: unconfig 956 @mkdir -p $(obj)include 957 @[ -z "$(findstring IVMS8_config,$@)" ] || \ 958 { echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \ 959 } 960 @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ 961 { echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \ 962 } 963 @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ 964 { echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \ 965 } 966 @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm 967 968kmsupx4_config: unconfig 969 @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile 970 971KUP4K_config : unconfig 972 @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup 973 974KUP4X_config : unconfig 975 @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup 976 977LANTEC_config : unconfig 978 @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec 979 980lwmon_config: unconfig 981 @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon 982 983MBX_config \ 984MBX860T_config: unconfig 985 @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx 986 987mgsuvd_config: unconfig 988 @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile 989 990MHPC_config: unconfig 991 @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec 992 993xtract_NETVIA = $(subst _V2,,$(subst _config,,$1)) 994 995NETVIA_V2_config \ 996NETVIA_config: unconfig 997 @mkdir -p $(obj)include 998 @[ -z "$(findstring NETVIA_config,$@)" ] || \ 999 { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \ 1000 $(XECHO) "... Version 1" ; \ 1001 } 1002 @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ 1003 { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \ 1004 $(XECHO) "... Version 2" ; \ 1005 } 1006 @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia 1007 1008xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1)) 1009 1010NETPHONE_V2_config \ 1011NETPHONE_config: unconfig 1012 @mkdir -p $(obj)include 1013 @[ -z "$(findstring NETPHONE_config,$@)" ] || \ 1014 { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \ 1015 } 1016 @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ 1017 { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \ 1018 } 1019 @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone 1020 1021xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1)))) 1022 1023NETTA_ISDN_6412_SWAPHOOK_config \ 1024NETTA_ISDN_SWAPHOOK_config \ 1025NETTA_6412_SWAPHOOK_config \ 1026NETTA_SWAPHOOK_config \ 1027NETTA_ISDN_6412_config \ 1028NETTA_ISDN_config \ 1029NETTA_6412_config \ 1030NETTA_config: unconfig 1031 @mkdir -p $(obj)include 1032 @[ -z "$(findstring ISDN_,$@)" ] || \ 1033 { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \ 1034 } 1035 @[ -n "$(findstring ISDN_,$@)" ] || \ 1036 { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \ 1037 } 1038 @[ -z "$(findstring 6412_,$@)" ] || \ 1039 { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \ 1040 } 1041 @[ -n "$(findstring 6412_,$@)" ] || \ 1042 { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \ 1043 } 1044 @[ -z "$(findstring SWAPHOOK_,$@)" ] || \ 1045 { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \ 1046 } 1047 @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ 1048 { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \ 1049 } 1050 @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta 1051 1052xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1)) 1053 1054NETTA2_V2_config \ 1055NETTA2_config: unconfig 1056 @mkdir -p $(obj)include 1057 @[ -z "$(findstring NETTA2_config,$@)" ] || \ 1058 { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \ 1059 } 1060 @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ 1061 { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \ 1062 } 1063 @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2 1064 1065NC650_Rev1_config \ 1066NC650_Rev2_config \ 1067CP850_config: unconfig 1068 @mkdir -p $(obj)include 1069 @[ -z "$(findstring CP850,$@)" ] || \ 1070 { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \ 1071 echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ 1072 } 1073 @[ -z "$(findstring Rev1,$@)" ] || \ 1074 { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \ 1075 } 1076 @[ -z "$(findstring Rev2,$@)" ] || \ 1077 { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ 1078 } 1079 @$(MKCONFIG) -a NC650 ppc mpc8xx nc650 1080 1081NX823_config: unconfig 1082 @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823 1083 1084pcu_e_config: unconfig 1085 @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens 1086 1087QS850_config: unconfig 1088 @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc 1089 1090QS823_config: unconfig 1091 @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc 1092 1093QS860T_config: unconfig 1094 @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc 1095 1096quantum_config: unconfig 1097 @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum 1098 1099R360MPI_config: unconfig 1100 @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi 1101 1102RBC823_config: unconfig 1103 @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823 1104 1105RPXClassic_config: unconfig 1106 @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic 1107 1108RPXlite_config: unconfig 1109 @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite 1110 1111RPXlite_DW_64_config \ 1112RPXlite_DW_LCD_config \ 1113RPXlite_DW_64_LCD_config \ 1114RPXlite_DW_NVRAM_config \ 1115RPXlite_DW_NVRAM_64_config \ 1116RPXlite_DW_NVRAM_LCD_config \ 1117RPXlite_DW_NVRAM_64_LCD_config \ 1118RPXlite_DW_config: unconfig 1119 @mkdir -p $(obj)include 1120 @[ -z "$(findstring _64,$@)" ] || \ 1121 { echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \ 1122 $(XECHO) "... with 64MHz system clock ..."; \ 1123 } 1124 @[ -z "$(findstring _LCD,$@)" ] || \ 1125 { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ 1126 echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ 1127 $(XECHO) "... with LCD display ..."; \ 1128 } 1129 @[ -z "$(findstring _NVRAM,$@)" ] || \ 1130 { echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ 1131 $(XECHO) "... with ENV in NVRAM ..."; \ 1132 } 1133 @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw 1134 1135rmu_config: unconfig 1136 @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu 1137 1138RRvision_config: unconfig 1139 @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision 1140 1141RRvision_LCD_config: unconfig 1142 @mkdir -p $(obj)include 1143 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1144 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h 1145 @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision 1146 1147SM850_config : unconfig 1148 @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc 1149 1150spc1920_config: unconfig 1151 @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920 1152 1153SPD823TS_config: unconfig 1154 @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx 1155 1156stxxtc_config: unconfig 1157 @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc stx 1158 1159svm_sc8xx_config: unconfig 1160 @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx 1161 1162SXNI855T_config: unconfig 1163 @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet 1164 1165# EMK MPC8xx based modules 1166TOP860_config: unconfig 1167 @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk 1168 1169# Play some tricks for configuration selection 1170# Only 855 and 860 boards may come with FEC 1171# and only 823 boards may have LCD support 1172xtract_8xx = $(subst _LCD,,$(subst _config,,$1)) 1173 1174FPS850L_config \ 1175FPS860L_config \ 1176NSCU_config \ 1177TQM823L_config \ 1178TQM823L_LCD_config \ 1179TQM850L_config \ 1180TQM855L_config \ 1181TQM860L_config \ 1182TQM862L_config \ 1183TQM823M_config \ 1184TQM850M_config \ 1185TQM855M_config \ 1186TQM860M_config \ 1187TQM862M_config \ 1188TQM866M_config \ 1189TQM885D_config \ 1190TK885D_config \ 1191virtlab2_config: unconfig 1192 @mkdir -p $(obj)include 1193 @[ -z "$(findstring _LCD,$@)" ] || \ 1194 { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ 1195 echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ 1196 $(XECHO) "... with LCD display" ; \ 1197 } 1198 @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc 1199 1200TTTech_config: unconfig 1201 @mkdir -p $(obj)include 1202 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1203 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h 1204 @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc 1205 1206uc100_config : unconfig 1207 @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100 1208 1209v37_config: unconfig 1210 @mkdir -p $(obj)include 1211 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1212 @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h 1213 @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37 1214 1215wtk_config: unconfig 1216 @mkdir -p $(obj)include 1217 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1218 @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h 1219 @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc 1220 1221######################################################################### 1222## PPC4xx Systems 1223######################################################################### 1224xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1)))))) 1225 1226acadia_config: unconfig 1227 @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc 1228 1229acadia_nand_config: unconfig 1230 @mkdir -p $(obj)include $(obj)board/amcc/acadia 1231 @mkdir -p $(obj)nand_spl/board/amcc/acadia 1232 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1233 @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc 1234 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp 1235 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1236 1237ADCIOP_config: unconfig 1238 @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd 1239 1240alpr_config: unconfig 1241 @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive 1242 1243AP1000_config:unconfig 1244 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix 1245 1246APC405_config: unconfig 1247 @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd 1248 1249AR405_config: unconfig 1250 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd 1251 1252ASH405_config: unconfig 1253 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd 1254 1255bamboo_config: unconfig 1256 @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc 1257 1258bamboo_nand_config: unconfig 1259 @mkdir -p $(obj)include $(obj)board/amcc/bamboo 1260 @mkdir -p $(obj)nand_spl/board/amcc/bamboo 1261 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1262 @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc 1263 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp 1264 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1265 1266bubinga_config: unconfig 1267 @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc 1268 1269CANBT_config: unconfig 1270 @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd 1271 1272# Arches, Canyonlands & Glacier use different U-Boot images 1273arches_config \ 1274canyonlands_config \ 1275glacier_config: unconfig 1276 @mkdir -p $(obj)include 1277 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1278 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1279 @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc 1280 1281canyonlands_nand_config \ 1282glacier_nand_config: unconfig 1283 @mkdir -p $(obj)include $(obj)board/amcc/canyonlands 1284 @mkdir -p $(obj)nand_spl/board/amcc/canyonlands 1285 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1286 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \ 1287 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h 1288 @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc 1289 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp 1290 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1291 1292CATcenter_config \ 1293CATcenter_25_config \ 1294CATcenter_33_config: unconfig 1295 @mkdir -p $(obj)include 1296 @ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h 1297 @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h 1298 @[ -z "$(findstring _25,$@)" ] || \ 1299 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \ 1300 $(XECHO) "SysClk = 25MHz" ; \ 1301 } 1302 @[ -z "$(findstring _33,$@)" ] || \ 1303 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \ 1304 $(XECHO) "SysClk = 33MHz" ; \ 1305 } 1306 @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave 1307 1308CMS700_config: unconfig 1309 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd 1310 1311CPCI2DP_config: unconfig 1312 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd 1313 1314CPCI405_config \ 1315CPCI4052_config \ 1316CPCI405DT_config \ 1317CPCI405AB_config: unconfig 1318 @mkdir -p $(obj)board/esd/cpci405 1319 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd 1320 1321CPCIISER4_config: unconfig 1322 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd 1323 1324CRAYL1_config: unconfig 1325 @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray 1326 1327csb272_config: unconfig 1328 @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272 1329 1330csb472_config: unconfig 1331 @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472 1332 1333DASA_SIM_config: unconfig 1334 @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd 1335 1336dlvision_config: unconfig 1337 @$(MKCONFIG) $(@:_config=) ppc ppc4xx dlvision gdsys 1338 1339DP405_config: unconfig 1340 @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd 1341 1342DU405_config: unconfig 1343 @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd 1344 1345DU440_config: unconfig 1346 @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd 1347 1348ebony_config: unconfig 1349 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc 1350 1351ERIC_config: unconfig 1352 @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric 1353 1354EXBITGEN_config: unconfig 1355 @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen 1356 1357fx12mm_flash_config: unconfig 1358 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1359 @mkdir -p $(obj)include $(obj)board/avnet/fx12mm 1360 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ 1361 > $(obj)board/avnet/fx12mm/config.tmp 1362 @echo "TEXT_BASE := 0xFFCB0000" \ 1363 >> $(obj)board/avnet/fx12mm/config.tmp 1364 @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet 1365 1366fx12mm_config: unconfig 1367 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1368 @mkdir -p $(obj)include $(obj)board/avnet/fx12mm 1369 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ 1370 > $(obj)board/avnet/fx12mm/config.tmp 1371 @echo "TEXT_BASE := 0x03000000" \ 1372 >> $(obj)board/avnet/fx12mm/config.tmp 1373 @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet 1374 1375G2000_config: unconfig 1376 @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000 1377 1378gdppc440etx_config: unconfig 1379 @$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys 1380 1381hcu4_config: unconfig 1382 @mkdir -p $(obj)board/netstal/common 1383 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal 1384 1385hcu5_config: unconfig 1386 @mkdir -p $(obj)board/netstal/common 1387 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal 1388 1389HH405_config: unconfig 1390 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd 1391 1392HUB405_config: unconfig 1393 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd 1394 1395# Compact-Center(codename intip) & DevCon-Center use different U-Boot images 1396intip_config \ 1397devconcenter_config: unconfig 1398 @mkdir -p $(obj)include 1399 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1400 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1401 @$(MKCONFIG) -n $@ -a intip ppc ppc4xx intip gdsys 1402 1403JSE_config: unconfig 1404 @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse 1405 1406KAREF_config: unconfig 1407 @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst 1408 1409katmai_config: unconfig 1410 @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc 1411 1412# Kilauea & Haleakala images are identical (recognized via PVR) 1413kilauea_config \ 1414haleakala_config: unconfig 1415 @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc 1416 1417kilauea_nand_config \ 1418haleakala_nand_config: unconfig 1419 @mkdir -p $(obj)include $(obj)board/amcc/kilauea 1420 @mkdir -p $(obj)nand_spl/board/amcc/kilauea 1421 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1422 @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc 1423 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp 1424 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1425 1426korat_config: unconfig 1427 @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat 1428 1429luan_config: unconfig 1430 @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc 1431 1432lwmon5_config: unconfig 1433 @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5 1434 1435makalu_config: unconfig 1436 @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc 1437 1438mcu25_config: unconfig 1439 @mkdir -p $(obj)board/netstal/common 1440 @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal 1441 1442METROBOX_config: unconfig 1443 @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst 1444 1445MIP405_config: unconfig 1446 @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl 1447 1448MIP405T_config: unconfig 1449 @mkdir -p $(obj)include 1450 @echo "#define CONFIG_MIP405T" >$(obj)include/config.h 1451 @$(XECHO) "Enable subset config for MIP405T" 1452 @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl 1453 1454ML2_config: unconfig 1455 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2 1456 1457ml300_config: unconfig 1458 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx 1459 1460ml507_flash_config: unconfig 1461 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1462 @mkdir -p $(obj)include $(obj)board/xilinx/ml507 1463 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1464 > $(obj)board/xilinx/ml507/config.tmp 1465 @echo "TEXT_BASE := 0xFE360000" \ 1466 >> $(obj)board/xilinx/ml507/config.tmp 1467 @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx 1468 1469ml507_config: unconfig 1470 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1471 @mkdir -p $(obj)include $(obj)board/xilinx/ml507 1472 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1473 > $(obj)board/xilinx/ml507/config.tmp 1474 @echo "TEXT_BASE := 0x04000000" \ 1475 >> $(obj)board/xilinx/ml507/config.tmp 1476 @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx 1477 1478neo_config: unconfig 1479 @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys 1480 1481ocotea_config: unconfig 1482 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc 1483 1484OCRTC_config \ 1485ORSG_config: unconfig 1486 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd 1487 1488p3p440_config: unconfig 1489 @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive 1490 1491PCI405_config: unconfig 1492 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd 1493 1494pcs440ep_config: unconfig 1495 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep 1496 1497PIP405_config: unconfig 1498 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl 1499 1500PLU405_config: unconfig 1501 @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd 1502 1503PMC405_config: unconfig 1504 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd 1505 1506PMC405DE_config: unconfig 1507 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405de esd 1508 1509PMC440_config: unconfig 1510 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd 1511 1512PPChameleonEVB_config \ 1513PPChameleonEVB_BA_25_config \ 1514PPChameleonEVB_ME_25_config \ 1515PPChameleonEVB_HI_25_config \ 1516PPChameleonEVB_BA_33_config \ 1517PPChameleonEVB_ME_33_config \ 1518PPChameleonEVB_HI_33_config: unconfig 1519 @mkdir -p $(obj)include 1520 @[ -z "$(findstring EVB_BA,$@)" ] || \ 1521 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \ 1522 $(XECHO) "... BASIC model" ; \ 1523 } 1524 @[ -z "$(findstring EVB_ME,$@)" ] || \ 1525 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \ 1526 $(XECHO) "... MEDIUM model" ; \ 1527 } 1528 @[ -z "$(findstring EVB_HI,$@)" ] || \ 1529 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \ 1530 $(XECHO) "... HIGH-END model" ; \ 1531 } 1532 @[ -z "$(findstring _25,$@)" ] || \ 1533 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \ 1534 $(XECHO) "SysClk = 25MHz" ; \ 1535 } 1536 @[ -z "$(findstring _33,$@)" ] || \ 1537 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \ 1538 $(XECHO) "SysClk = 33MHz" ; \ 1539 } 1540 @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave 1541 1542quad100hd_config: unconfig 1543 @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd 1544 1545redwood_config: unconfig 1546 @$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc 1547 1548sbc405_config: unconfig 1549 @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405 1550 1551sc3_config:unconfig 1552 @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3 1553 1554sequoia_config \ 1555rainier_config: unconfig 1556 @mkdir -p $(obj)include 1557 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1558 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1559 @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc 1560 1561sequoia_nand_config \ 1562rainier_nand_config: unconfig 1563 @mkdir -p $(obj)include $(obj)board/amcc/sequoia 1564 @mkdir -p $(obj)nand_spl/board/amcc/sequoia 1565 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1566 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1567 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h 1568 @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc 1569 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp 1570 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1571 1572sequoia_ramboot_config \ 1573rainier_ramboot_config: unconfig 1574 @mkdir -p $(obj)include $(obj)board/amcc/sequoia 1575 @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h 1576 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1577 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h 1578 @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc 1579 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp 1580 @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \ 1581 $(obj)board/amcc/sequoia/config.tmp 1582 1583taihu_config: unconfig 1584 @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc 1585 1586taishan_config: unconfig 1587 @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc 1588 1589v5fx30teval_config: unconfig 1590 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1591 @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval 1592 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1593 > $(obj)board/avnet/v5fx30teval/config.tmp 1594 @echo "TEXT_BASE := 0x03000000" \ 1595 >> $(obj)board/avnet/v5fx30teval/config.tmp 1596 @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet 1597 1598v5fx30teval_flash_config: unconfig 1599 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1600 @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval 1601 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1602 > $(obj)board/avnet/v5fx30teval/config.tmp 1603 @echo "TEXT_BASE := 0xFF1C0000" \ 1604 >> $(obj)board/avnet/v5fx30teval/config.tmp 1605 @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet 1606 1607VOH405_config: unconfig 1608 @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd 1609 1610VOM405_config: unconfig 1611 @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd 1612 1613W7OLMC_config \ 1614W7OLMG_config: unconfig 1615 @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o 1616 1617# Walnut & Sycamore images are identical (recognized via PVR) 1618walnut_config \ 1619sycamore_config: unconfig 1620 @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc 1621 1622WUH405_config: unconfig 1623 @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd 1624 1625xilinx-ppc405-generic_flash_config: unconfig 1626 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1627 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ 1628 > $(obj)board/xilinx/ppc405-generic/config.tmp 1629 @echo "TEXT_BASE := 0xFE360000" \ 1630 >> $(obj)board/xilinx/ppc405-generic/config.tmp 1631 @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx 1632 1633xilinx-ppc405-generic_config: unconfig 1634 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1635 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ 1636 > $(obj)board/xilinx/ppc405-generic/config.tmp 1637 @echo "TEXT_BASE := 0x04000000" \ 1638 >> $(obj)board/xilinx/ppc405-generic/config.tmp 1639 @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx 1640 1641xilinx-ppc440-generic_flash_config: unconfig 1642 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1643 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1644 > $(obj)board/xilinx/ppc440-generic/config.tmp 1645 @echo "TEXT_BASE := 0xFE360000" \ 1646 >> $(obj)board/xilinx/ppc440-generic/config.tmp 1647 @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx 1648 1649xilinx-ppc440-generic_config: unconfig 1650 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1651 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1652 > $(obj)board/xilinx/ppc440-generic/config.tmp 1653 @echo "TEXT_BASE := 0x04000000" \ 1654 >> $(obj)board/xilinx/ppc440-generic/config.tmp 1655 @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx 1656 1657XPEDITE1000_config: unconfig 1658 @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1000 xes 1659 1660yosemite_config \ 1661yellowstone_config: unconfig 1662 @mkdir -p $(obj)include 1663 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1664 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1665 @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc 1666 1667yucca_config: unconfig 1668 @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc 1669 1670zeus_config: unconfig 1671 @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus 1672 1673######################################################################### 1674## MPC8220 Systems 1675######################################################################### 1676 1677Alaska8220_config \ 1678Yukon8220_config: unconfig 1679 @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska 1680 1681sorcery_config: unconfig 1682 @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery 1683 1684######################################################################### 1685## MPC824x Systems 1686######################################################################### 1687xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))) 1688 1689A3000_config: unconfig 1690 @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000 1691 1692barco_config: unconfig 1693 @$(MKCONFIG) $(@:_config=) ppc mpc824x barco 1694 1695BMW_config: unconfig 1696 @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw 1697 1698CPC45_config \ 1699CPC45_ROMBOOT_config: unconfig 1700 @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45 1701 @cd $(obj)include ; \ 1702 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1703 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1704 $(XECHO) "... booting from 8-bit flash" ; \ 1705 else \ 1706 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1707 $(XECHO) "... booting from 64-bit flash" ; \ 1708 fi; \ 1709 echo "export CONFIG_BOOT_ROM" >> config.mk; 1710 1711CU824_config: unconfig 1712 @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824 1713 1714debris_config: unconfig 1715 @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin 1716 1717eXalion_config: unconfig 1718 @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion 1719 1720HIDDEN_DRAGON_config: unconfig 1721 @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon 1722 1723kvme080_config: unconfig 1724 @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin 1725 1726# HDLAN is broken ATM. Should be fixed as soon as hardware is available and as 1727# time permits. 1728#linkstation_HDLAN_config \ 1729# Remove this line when HDLAN is fixed 1730linkstation_HGLAN_config: unconfig 1731 @mkdir -p $(obj)include 1732 @case $@ in \ 1733 *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \ 1734 *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \ 1735 esac 1736 @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation 1737 1738MOUSSE_config: unconfig 1739 @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse 1740 1741MUSENKI_config: unconfig 1742 @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki 1743 1744MVBLUE_config: unconfig 1745 @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue 1746 1747OXC_config: unconfig 1748 @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc 1749 1750PN62_config: unconfig 1751 @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62 1752 1753Sandpoint8240_config: unconfig 1754 @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint 1755 1756Sandpoint8245_config: unconfig 1757 @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint 1758 1759sbc8240_config: unconfig 1760 @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240 1761 1762SL8245_config: unconfig 1763 @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245 1764 1765utx8245_config: unconfig 1766 @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245 1767 1768######################################################################### 1769## MPC8260 Systems 1770######################################################################### 1771 1772atc_config: unconfig 1773 @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc 1774 1775cogent_mpc8260_config: unconfig 1776 @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent 1777 1778CPU86_config \ 1779CPU86_ROMBOOT_config: unconfig 1780 @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86 1781 @cd $(obj)include ; \ 1782 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1783 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1784 $(XECHO) "... booting from 8-bit flash" ; \ 1785 else \ 1786 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1787 $(XECHO) "... booting from 64-bit flash" ; \ 1788 fi; \ 1789 echo "export CONFIG_BOOT_ROM" >> config.mk; 1790 1791CPU87_config \ 1792CPU87_ROMBOOT_config: unconfig 1793 @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87 1794 @cd $(obj)include ; \ 1795 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1796 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1797 $(XECHO) "... booting from 8-bit flash" ; \ 1798 else \ 1799 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1800 $(XECHO) "... booting from 64-bit flash" ; \ 1801 fi; \ 1802 echo "export CONFIG_BOOT_ROM" >> config.mk; 1803 1804ep8248_config \ 1805ep8248E_config : unconfig 1806 @$(MKCONFIG) ep8248 ppc mpc8260 ep8248 1807 1808ep8260_config: unconfig 1809 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260 1810 1811ep82xxm_config: unconfig 1812 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm 1813 1814gw8260_config: unconfig 1815 @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260 1816 1817hymod_config: unconfig 1818 @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod 1819 1820IDS8247_config: unconfig 1821 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247 1822 1823IPHASE4539_config: unconfig 1824 @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539 1825 1826ISPAN_config \ 1827ISPAN_REVB_config: unconfig 1828 @mkdir -p $(obj)include 1829 @if [ "$(findstring _REVB_,$@)" ] ; then \ 1830 echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \ 1831 fi 1832 @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan 1833 1834mgcoge_config : unconfig 1835 @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile 1836 1837MPC8260ADS_config \ 1838MPC8260ADS_lowboot_config \ 1839MPC8260ADS_33MHz_config \ 1840MPC8260ADS_33MHz_lowboot_config \ 1841MPC8260ADS_40MHz_config \ 1842MPC8260ADS_40MHz_lowboot_config \ 1843MPC8272ADS_config \ 1844MPC8272ADS_lowboot_config \ 1845PQ2FADS_config \ 1846PQ2FADS_lowboot_config \ 1847PQ2FADS-VR_config \ 1848PQ2FADS-VR_lowboot_config \ 1849PQ2FADS-ZU_config \ 1850PQ2FADS-ZU_lowboot_config \ 1851PQ2FADS-ZU_66MHz_config \ 1852PQ2FADS-ZU_66MHz_lowboot_config \ 1853 : unconfig 1854 @mkdir -p $(obj)include 1855 @mkdir -p $(obj)board/freescale/mpc8260ads 1856 $(if $(findstring PQ2FADS,$@), \ 1857 @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \ 1858 @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h) 1859 $(if $(findstring MHz,$@), \ 1860 @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \ 1861 $(if $(findstring VR,$@), \ 1862 @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h)) 1863 @[ -z "$(findstring lowboot_,$@)" ] || \ 1864 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \ 1865 $(XECHO) "... with lowboot configuration" ; \ 1866 } 1867 @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale 1868 1869MPC8266ADS_config: unconfig 1870 @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale 1871 1872muas3001_dev_config \ 1873muas3001_config : unconfig 1874 @mkdir -p $(obj)include 1875 @mkdir -p $(obj)board/muas3001 1876 @if [ "$(findstring dev,$@)" ] ; then \ 1877 echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \ 1878 fi 1879 @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001 1880 1881# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash 1882PM825_config \ 1883PM825_ROMBOOT_config \ 1884PM825_BIGFLASH_config \ 1885PM825_ROMBOOT_BIGFLASH_config \ 1886PM826_config \ 1887PM826_ROMBOOT_config \ 1888PM826_BIGFLASH_config \ 1889PM826_ROMBOOT_BIGFLASH_config: unconfig 1890 @mkdir -p $(obj)include 1891 @mkdir -p $(obj)board/pm826 1892 @if [ "$(findstring PM825_,$@)" ] ; then \ 1893 echo "#define CONFIG_PCI" >$(obj)include/config.h ; \ 1894 else \ 1895 >$(obj)include/config.h ; \ 1896 fi 1897 @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1898 $(XECHO) "... booting from 8-bit flash" ; \ 1899 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 1900 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ 1901 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ 1902 $(XECHO) "... with 32 MB Flash" ; \ 1903 echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ 1904 fi; \ 1905 else \ 1906 $(XECHO) "... booting from 64-bit flash" ; \ 1907 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ 1908 $(XECHO) "... with 32 MB Flash" ; \ 1909 echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ 1910 echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \ 1911 else \ 1912 echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \ 1913 fi; \ 1914 fi 1915 @$(MKCONFIG) -a PM826 ppc mpc8260 pm826 1916 1917PM828_config \ 1918PM828_PCI_config \ 1919PM828_ROMBOOT_config \ 1920PM828_ROMBOOT_PCI_config: unconfig 1921 @mkdir -p $(obj)include 1922 @mkdir -p $(obj)board/pm826 1923 @if [ "$(findstring _PCI_,$@)" ] ; then \ 1924 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 1925 $(XECHO) "... with PCI enabled" ; \ 1926 fi 1927 @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1928 $(XECHO) "... booting from 8-bit flash" ; \ 1929 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 1930 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ 1931 fi 1932 @$(MKCONFIG) -a PM828 ppc mpc8260 pm828 1933 1934ppmc8260_config: unconfig 1935 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260 1936 1937Rattler8248_config \ 1938Rattler_config: unconfig 1939 @mkdir -p $(obj)include 1940 $(if $(findstring 8248,$@), \ 1941 @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) 1942 @$(MKCONFIG) -a Rattler ppc mpc8260 rattler 1943 1944RPXsuper_config: unconfig 1945 @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper 1946 1947rsdproto_config: unconfig 1948 @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto 1949 1950sacsng_config: unconfig 1951 @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng 1952 1953sbc8260_config: unconfig 1954 @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260 1955 1956SCM_config: unconfig 1957 @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens 1958 1959TQM8255_AA_config \ 1960TQM8260_AA_config \ 1961TQM8260_AB_config \ 1962TQM8260_AC_config \ 1963TQM8260_AD_config \ 1964TQM8260_AE_config \ 1965TQM8260_AF_config \ 1966TQM8260_AG_config \ 1967TQM8260_AH_config \ 1968TQM8260_AI_config \ 1969TQM8265_AA_config: unconfig 1970 @mkdir -p $(obj)include 1971 @case "$@" in \ 1972 TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \ 1973 TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \ 1974 TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ 1975 TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ 1976 TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1977 TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \ 1978 TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1979 TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \ 1980 TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \ 1981 TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1982 TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \ 1983 esac; \ 1984 if [ "$${CTYPE}" != "MPC8260" ] ; then \ 1985 echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \ 1986 fi; \ 1987 echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \ 1988 echo "... with $${CFREQ}MHz system clock" ; \ 1989 if [ "$${CACHE}" = "yes" ] ; then \ 1990 echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ 1991 $(XECHO) "... with L2 Cache support" ; \ 1992 else \ 1993 echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ 1994 $(XECHO) "... without L2 Cache support" ; \ 1995 fi; \ 1996 if [ "$${BMODE}" = "60x" ] ; then \ 1997 echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ 1998 $(XECHO) "... with 60x Bus Mode" ; \ 1999 else \ 2000 echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ 2001 $(XECHO) "... without 60x Bus Mode" ; \ 2002 fi 2003 @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc 2004 2005TQM8272_config: unconfig 2006 @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc 2007 2008VoVPN-GW_66MHz_config \ 2009VoVPN-GW_100MHz_config: unconfig 2010 @mkdir -p $(obj)include 2011 @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h 2012 @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk 2013 2014ZPC1900_config: unconfig 2015 @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900 2016 2017######################################################################### 2018## Coldfire 2019######################################################################### 2020 2021M5208EVBE_config : unconfig 2022 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale 2023 2024M52277EVB_config \ 2025M52277EVB_spansion_config \ 2026M52277EVB_stmicro_config : unconfig 2027 @case "$@" in \ 2028 M52277EVB_config) FLASH=SPANSION;; \ 2029 M52277EVB_spansion_config) FLASH=SPANSION;; \ 2030 M52277EVB_stmicro_config) FLASH=STMICRO;; \ 2031 esac; \ 2032 if [ "$${FLASH}" = "SPANSION" ] ; then \ 2033 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ 2034 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \ 2035 cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \ 2036 $(XECHO) "... with SPANSION boot..." ; \ 2037 fi; \ 2038 if [ "$${FLASH}" = "STMICRO" ] ; then \ 2039 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 2040 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 2041 echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \ 2042 cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \ 2043 $(XECHO) "... with ST Micro boot..." ; \ 2044 fi 2045 @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale 2046 2047M5235EVB_config \ 2048M5235EVB_Flash16_config \ 2049M5235EVB_Flash32_config: unconfig 2050 @case "$@" in \ 2051 M5235EVB_config) FLASH=16;; \ 2052 M5235EVB_Flash16_config) FLASH=16;; \ 2053 M5235EVB_Flash32_config) FLASH=32;; \ 2054 esac; \ 2055 if [ "$${FLASH}" != "16" ] ; then \ 2056 echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \ 2057 echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ 2058 cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \ 2059 else \ 2060 echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ 2061 cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \ 2062 fi 2063 @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale 2064 2065M5249EVB_config : unconfig 2066 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale 2067 2068M5253DEMO_config : unconfig 2069 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale 2070 2071M5253EVBE_config : unconfig 2072 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale 2073 2074cobra5272_config : unconfig 2075 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272 2076 2077EB+MCF-EV123_config : unconfig 2078 @mkdir -p $(obj)include 2079 @mkdir -p $(obj)board/BuS/EB+MCF-EV123 2080 @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk 2081 @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS 2082 2083EB+MCF-EV123_internal_config : unconfig 2084 @mkdir -p $(obj)include 2085 @mkdir -p $(obj)board/BuS/EB+MCF-EV123 2086 @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk 2087 @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS 2088 2089idmr_config : unconfig 2090 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr 2091 2092M5271EVB_config : unconfig 2093 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale 2094 2095M5272C3_config : unconfig 2096 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale 2097 2098M5275EVB_config : unconfig 2099 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale 2100 2101M5282EVB_config : unconfig 2102 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale 2103 2104M53017EVB_config : unconfig 2105 @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale 2106 2107M5329AFEE_config \ 2108M5329BFEE_config : unconfig 2109 @case "$@" in \ 2110 M5329AFEE_config) NAND=0;; \ 2111 M5329BFEE_config) NAND=16;; \ 2112 esac; \ 2113 if [ "$${NAND}" != "0" ] ; then \ 2114 echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ 2115 fi 2116 @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale 2117 2118M5373EVB_config : unconfig 2119 @case "$@" in \ 2120 M5373EVB_config) NAND=16;; \ 2121 esac; \ 2122 if [ "$${NAND}" != "0" ] ; then \ 2123 echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ 2124 fi 2125 @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale 2126 2127M54451EVB_config \ 2128M54451EVB_stmicro_config : unconfig 2129 @case "$@" in \ 2130 M54451EVB_config) FLASH=NOR;; \ 2131 M54451EVB_stmicro_config) FLASH=STMICRO;; \ 2132 esac; \ 2133 if [ "$${FLASH}" = "NOR" ] ; then \ 2134 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \ 2135 cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \ 2136 $(XECHO) "... with NOR boot..." ; \ 2137 fi; \ 2138 if [ "$${FLASH}" = "STMICRO" ] ; then \ 2139 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 2140 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 2141 echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \ 2142 cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \ 2143 $(XECHO) "... with ST Micro boot..." ; \ 2144 fi; \ 2145 echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ; 2146 @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale 2147 2148M54455EVB_config \ 2149M54455EVB_atmel_config \ 2150M54455EVB_intel_config \ 2151M54455EVB_a33_config \ 2152M54455EVB_a66_config \ 2153M54455EVB_i33_config \ 2154M54455EVB_i66_config \ 2155M54455EVB_stm33_config : unconfig 2156 @case "$@" in \ 2157 M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \ 2158 M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \ 2159 M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \ 2160 M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \ 2161 M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \ 2162 M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \ 2163 M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \ 2164 M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \ 2165 esac; \ 2166 if [ "$${FLASH}" = "INTEL" ] ; then \ 2167 echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \ 2168 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2169 cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2170 $(XECHO) "... with INTEL boot..." ; \ 2171 fi; \ 2172 if [ "$${FLASH}" = "ATMEL" ] ; then \ 2173 echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \ 2174 echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2175 cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2176 $(XECHO) "... with ATMEL boot..." ; \ 2177 fi; \ 2178 if [ "$${FLASH}" = "STMICRO" ] ; then \ 2179 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 2180 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 2181 echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2182 cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2183 $(XECHO) "... with ST Micro boot..." ; \ 2184 fi; \ 2185 echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ 2186 $(XECHO) "... with $${FREQ}Hz input clock" 2187 @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale 2188 2189M5475AFE_config \ 2190M5475BFE_config \ 2191M5475CFE_config \ 2192M5475DFE_config \ 2193M5475EFE_config \ 2194M5475FFE_config \ 2195M5475GFE_config : unconfig 2196 @case "$@" in \ 2197 M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2198 M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ 2199 M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ 2200 M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ 2201 M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ 2202 M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ 2203 M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2204 esac; \ 2205 echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \ 2206 echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ 2207 echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ 2208 if [ "$${RAM1}" != "0" ] ; then \ 2209 echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ 2210 fi; \ 2211 if [ "$${CODE}" != "0" ] ; then \ 2212 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ 2213 fi; \ 2214 if [ "$${VID}" == "1" ] ; then \ 2215 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ 2216 fi; \ 2217 if [ "$${USB}" == "1" ] ; then \ 2218 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ 2219 fi 2220 @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale 2221 2222M5485AFE_config \ 2223M5485BFE_config \ 2224M5485CFE_config \ 2225M5485DFE_config \ 2226M5485EFE_config \ 2227M5485FFE_config \ 2228M5485GFE_config \ 2229M5485HFE_config : unconfig 2230 @case "$@" in \ 2231 M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2232 M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ 2233 M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ 2234 M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ 2235 M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ 2236 M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ 2237 M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2238 M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \ 2239 esac; \ 2240 echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \ 2241 echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ 2242 echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ 2243 if [ "$${RAM1}" != "0" ] ; then \ 2244 echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ 2245 fi; \ 2246 if [ "$${CODE}" != "0" ] ; then \ 2247 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ 2248 fi; \ 2249 if [ "$${VID}" == "1" ] ; then \ 2250 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ 2251 fi; \ 2252 if [ "$${USB}" == "1" ] ; then \ 2253 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ 2254 fi 2255 @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale 2256 2257TASREG_config : unconfig 2258 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd 2259 2260######################################################################### 2261## MPC83xx Systems 2262######################################################################### 2263 2264kmeter1_config: unconfig 2265 @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile 2266 2267MPC8313ERDB_33_config \ 2268MPC8313ERDB_66_config \ 2269MPC8313ERDB_NAND_33_config \ 2270MPC8313ERDB_NAND_66_config: unconfig 2271 @mkdir -p $(obj)include 2272 @mkdir -p $(obj)board/freescale/mpc8313erdb 2273 @if [ "$(findstring _33_,$@)" ] ; then \ 2274 $(XECHO) -n "...33M ..." ; \ 2275 echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \ 2276 fi ; \ 2277 if [ "$(findstring _66_,$@)" ] ; then \ 2278 $(XECHO) -n "...66M..." ; \ 2279 echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \ 2280 fi ; \ 2281 if [ "$(findstring _NAND_,$@)" ] ; then \ 2282 $(XECHO) -n "...NAND..." ; \ 2283 echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \ 2284 echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \ 2285 fi ; 2286 @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale 2287 @if [ "$(findstring _NAND_,$@)" ] ; then \ 2288 echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \ 2289 fi ; 2290 2291MPC8315ERDB_config: unconfig 2292 @$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale 2293 2294MPC8323ERDB_config: unconfig 2295 @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale 2296 2297MPC832XEMDS_config \ 2298MPC832XEMDS_HOST_33_config \ 2299MPC832XEMDS_HOST_66_config \ 2300MPC832XEMDS_SLAVE_config \ 2301MPC832XEMDS_ATM_config: unconfig 2302 @mkdir -p $(obj)include 2303 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2304 $(XECHO) -n "... PCI HOST " ; \ 2305 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2306 fi ; \ 2307 if [ "$(findstring _SLAVE_,$@)" ] ; then \ 2308 $(XECHO) "...PCI SLAVE 66M" ; \ 2309 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2310 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ 2311 fi ; \ 2312 if [ "$(findstring _33_,$@)" ] ; then \ 2313 $(XECHO) -n "...33M ..." ; \ 2314 echo "#define PCI_33M" >>$(obj)include/config.h ; \ 2315 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2316 fi ; \ 2317 if [ "$(findstring _66_,$@)" ] ; then \ 2318 $(XECHO) -n "...66M..." ; \ 2319 echo "#define PCI_66M" >>$(obj)include/config.h ; \ 2320 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2321 fi ; \ 2322 if [ "$(findstring _ATM_,$@)" ] ; then \ 2323 $(XECHO) -n "...ATM..." ; \ 2324 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2325 echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ 2326 fi ; 2327 @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale 2328 2329MPC8349EMDS_config: unconfig 2330 @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale 2331 2332MPC8349ITX_config \ 2333MPC8349ITX_LOWBOOT_config \ 2334MPC8349ITXGP_config: unconfig 2335 @mkdir -p $(obj)include 2336 @mkdir -p $(obj)board/freescale/mpc8349itx 2337 @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h 2338 @if [ "$(findstring GP,$@)" ] ; then \ 2339 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ 2340 fi 2341 @if [ "$(findstring LOWBOOT,$@)" ] ; then \ 2342 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ 2343 fi 2344 @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale 2345 2346MPC8360EMDS_config \ 2347MPC8360EMDS_HOST_33_config \ 2348MPC8360EMDS_HOST_66_config \ 2349MPC8360EMDS_SLAVE_config \ 2350MPC8360EMDS_ATM_config: unconfig 2351 @mkdir -p $(obj)include 2352 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2353 $(XECHO) -n "... PCI HOST " ; \ 2354 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2355 fi ; \ 2356 if [ "$(findstring _SLAVE_,$@)" ] ; then \ 2357 $(XECHO) "...PCI SLAVE 66M" ; \ 2358 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2359 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ 2360 fi ; \ 2361 if [ "$(findstring _33_,$@)" ] ; then \ 2362 $(XECHO) -n "...33M ..." ; \ 2363 echo "#define PCI_33M" >>$(obj)include/config.h ; \ 2364 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2365 fi ; \ 2366 if [ "$(findstring _66_,$@)" ] ; then \ 2367 $(XECHO) -n "...66M..." ; \ 2368 echo "#define PCI_66M" >>$(obj)include/config.h ; \ 2369 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2370 fi ; \ 2371 if [ "$(findstring _ATM_,$@)" ] ; then \ 2372 $(XECHO) -n "...ATM..." ; \ 2373 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2374 echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ 2375 fi ; 2376 @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale 2377 2378MPC8360ERDK_33_config \ 2379MPC8360ERDK_66_config \ 2380MPC8360ERDK_config: unconfig 2381 @mkdir -p $(obj)include 2382 @if [ "$(findstring _33_,$@)" ] ; then \ 2383 $(XECHO) -n "... CLKIN 33MHz " ; \ 2384 echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\ 2385 fi ; 2386 @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale 2387 2388MPC837XEMDS_config \ 2389MPC837XEMDS_HOST_config: unconfig 2390 @mkdir -p $(obj)include 2391 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2392 $(XECHO) -n "... PCI HOST " ; \ 2393 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2394 fi ; 2395 @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale 2396 2397MPC837XERDB_config: unconfig 2398 @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale 2399 2400MVBLM7_config: unconfig 2401 @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision 2402 2403sbc8349_config \ 2404sbc8349_PCI_33_config \ 2405sbc8349_PCI_66_config: unconfig 2406 @mkdir -p $(obj)include 2407 @if [ "$(findstring _PCI_,$@)" ] ; then \ 2408 $(XECHO) -n "... PCI HOST at " ; \ 2409 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2410 fi ; \ 2411 if [ "$(findstring _33_,$@)" ] ; then \ 2412 $(XECHO) -n "33MHz... " ; \ 2413 echo "#define PCI_33M" >>$(obj)include/config.h ; \ 2414 fi ; \ 2415 if [ "$(findstring _66_,$@)" ] ; then \ 2416 $(XECHO) -n "66MHz... " ; \ 2417 echo "#define PCI_66M" >>$(obj)include/config.h ; \ 2418 fi ; 2419 @$(MKCONFIG) -a sbc8349 ppc mpc83xx sbc8349 2420 2421SIMPC8313_LP_config \ 2422SIMPC8313_SP_config: unconfig 2423 @mkdir -p $(obj)include 2424 @mkdir -p $(obj)board/sheldon/simpc8313 2425 @if [ "$(findstring _LP_,$@)" ] ; then \ 2426 $(XECHO) -n "...Large Page NAND..." ; \ 2427 echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \ 2428 fi ; \ 2429 if [ "$(findstring _SP_,$@)" ] ; then \ 2430 $(XECHO) -n "...Small Page NAND..." ; \ 2431 echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \ 2432 fi ; 2433 @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon 2434 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 2435 2436TQM834x_config: unconfig 2437 @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc 2438 2439vme8349_config: unconfig 2440 @$(MKCONFIG) $(@:_config=) ppc mpc83xx vme8349 esd 2441 2442######################################################################### 2443## MPC85xx Systems 2444######################################################################### 2445 2446ATUM8548_config: unconfig 2447 @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548 2448 2449MPC8536DS_36BIT_config \ 2450MPC8536DS_config: unconfig 2451 @mkdir -p $(obj)include 2452 @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 2453 @$(MKCONFIG) -a MPC8536DS ppc mpc85xx mpc8536ds freescale 2454 2455MPC8540ADS_config: unconfig 2456 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale 2457 2458MPC8540EVAL_config \ 2459MPC8540EVAL_33_config \ 2460MPC8540EVAL_66_config \ 2461MPC8540EVAL_33_slave_config \ 2462MPC8540EVAL_66_slave_config: unconfig 2463 @mkdir -p $(obj)include 2464 @if [ "$(findstring _33_,$@)" ] ; then \ 2465 $(XECHO) "... 33 MHz PCI" ; \ 2466 else \ 2467 echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \ 2468 $(XECHO) "... 66 MHz PCI" ; \ 2469 fi ; \ 2470 if [ "$(findstring _slave_,$@)" ] ; then \ 2471 echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \ 2472 $(XECHO) " slave" ; \ 2473 else \ 2474 $(XECHO) " host" ; \ 2475 fi 2476 @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval 2477 2478MPC8560ADS_config: unconfig 2479 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale 2480 2481MPC8541CDS_legacy_config \ 2482MPC8541CDS_config: unconfig 2483 @mkdir -p $(obj)include 2484 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2485 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2486 $(XECHO) "... legacy" ; \ 2487 fi 2488 @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale 2489 2490MPC8544DS_config: unconfig 2491 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale 2492 2493MPC8548CDS_legacy_config \ 2494MPC8548CDS_config: unconfig 2495 @mkdir -p $(obj)include 2496 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2497 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2498 $(XECHO) "... legacy" ; \ 2499 fi 2500 @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale 2501 2502MPC8555CDS_legacy_config \ 2503MPC8555CDS_config: unconfig 2504 @mkdir -p $(obj)include 2505 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2506 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2507 $(XECHO) "... legacy" ; \ 2508 fi 2509 @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale 2510 2511MPC8568MDS_config: unconfig 2512 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale 2513 2514MPC8569MDS_config: unconfig 2515 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8569mds freescale 2516 2517MPC8572DS_36BIT_config \ 2518MPC8572DS_config: unconfig 2519 @mkdir -p $(obj)include 2520 @if [ "$(findstring _36BIT_,$@)" ] ; then \ 2521 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ 2522 $(XECHO) "... enabling 36-bit physical addressing." ; \ 2523 fi 2524 @$(MKCONFIG) -a MPC8572DS ppc mpc85xx mpc8572ds freescale 2525 2526P2020DS_36BIT_config \ 2527P2020DS_config: unconfig 2528 @mkdir -p $(obj)include 2529 @if [ "$(findstring _36BIT_,$@)" ] ; then \ 2530 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ 2531 $(XECHO) "... enabling 36-bit physical addressing." ; \ 2532 fi 2533 @$(MKCONFIG) -a P2020DS ppc mpc85xx p2020ds freescale 2534 2535P1011RDB_config: unconfig 2536 @mkdir -p $(obj)include 2537 @echo "#define CONFIG_P1011" >>$(obj)include/config.h ; 2538 @$(MKCONFIG) -a P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale 2539 2540P1020RDB_config: unconfig 2541 @mkdir -p $(obj)include 2542 @echo "#define CONFIG_P1020" >>$(obj)include/config.h ; 2543 @$(MKCONFIG) -a P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale 2544 2545P2010RDB_config: unconfig 2546 @mkdir -p $(obj)include 2547 @echo "#define CONFIG_P2010" >>$(obj)include/config.h ; 2548 @$(MKCONFIG) -a P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale 2549 2550P2020RDB_config: unconfig 2551 @mkdir -p $(obj)include 2552 @echo "#define CONFIG_P2020" >>$(obj)include/config.h ; 2553 @$(MKCONFIG) -a P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale 2554 2555PM854_config: unconfig 2556 @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854 2557 2558PM856_config: unconfig 2559 @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856 2560 2561sbc8540_config \ 2562sbc8540_33_config \ 2563sbc8540_66_config: unconfig 2564 @mkdir -p $(obj)include 2565 @if [ "$(findstring _66_,$@)" ] ; then \ 2566 echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ 2567 $(XECHO) "... 66 MHz PCI" ; \ 2568 else \ 2569 $(XECHO) "... 33 MHz PCI" ; \ 2570 fi 2571 @$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560 2572 2573sbc8548_config: unconfig 2574 @$(MKCONFIG) $(@:_config=) ppc mpc85xx sbc8548 2575 2576sbc8560_config \ 2577sbc8560_33_config \ 2578sbc8560_66_config: unconfig 2579 @mkdir -p $(obj)include 2580 @if [ "$(findstring _66_,$@)" ] ; then \ 2581 echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ 2582 $(XECHO) "... 66 MHz PCI" ; \ 2583 else \ 2584 $(XECHO) "... 33 MHz PCI" ; \ 2585 fi 2586 @$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560 2587 2588socrates_config: unconfig 2589 @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates 2590 2591stxgp3_config: unconfig 2592 @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 stx 2593 2594stxssa_config \ 2595stxssa_4M_config: unconfig 2596 @mkdir -p $(obj)include 2597 @if [ "$(findstring _4M_,$@)" ] ; then \ 2598 echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \ 2599 $(XECHO) "... with 4 MiB flash memory" ; \ 2600 fi 2601 @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa stx 2602 2603TQM8540_config \ 2604TQM8541_config \ 2605TQM8548_config \ 2606TQM8548_AG_config \ 2607TQM8548_BE_config \ 2608TQM8555_config \ 2609TQM8560_config: unconfig 2610 @mkdir -p $(obj)include 2611 @BTYPE=$(@:_config=); \ 2612 CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \ 2613 $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \ 2614 echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \ 2615 echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \ 2616 echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \ 2617 echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h; 2618 @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc 2619 @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk; 2620 2621XPEDITE5200_config: unconfig 2622 @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes 2623 2624XPEDITE5370_config: unconfig 2625 @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes 2626 2627######################################################################### 2628## MPC86xx Systems 2629######################################################################### 2630 2631MPC8610HPCD_config: unconfig 2632 @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale 2633 2634MPC8641HPCN_36BIT_config \ 2635MPC8641HPCN_config: unconfig 2636 @mkdir -p $(obj)include 2637 @if [ "$(findstring _36BIT_,$@)" ] ; then \ 2638 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ 2639 $(XECHO) "... enabling 36-bit physical addressing." ; \ 2640 fi 2641 @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale 2642 2643sbc8641d_config: unconfig 2644 @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d 2645 2646XPEDITE5170_config: unconfig 2647 @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes 2648 2649######################################################################### 2650## 74xx/7xx Systems 2651######################################################################### 2652 2653AmigaOneG3SE_config: unconfig 2654 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI 2655 2656BAB7xx_config: unconfig 2657 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec 2658 2659CPCI750_config: unconfig 2660 @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd 2661 2662DB64360_config: unconfig 2663 @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell 2664 2665DB64460_config: unconfig 2666 @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell 2667 2668ELPPC_config: unconfig 2669 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec 2670 2671EVB64260_config \ 2672EVB64260_750CX_config: unconfig 2673 @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260 2674 2675mpc7448hpc2_config: unconfig 2676 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale 2677 2678P3G4_config: unconfig 2679 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 2680 2681p3m750_config \ 2682p3m7448_config: unconfig 2683 @mkdir -p $(obj)include 2684 @if [ "$(findstring 750_,$@)" ] ; then \ 2685 echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \ 2686 else \ 2687 echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \ 2688 fi 2689 @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive 2690 2691PCIPPC2_config \ 2692PCIPPC6_config: unconfig 2693 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2 2694 2695ppmc7xx_config: unconfig 2696 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx 2697 2698ZUMA_config: unconfig 2699 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 2700 2701#======================================================================== 2702# ARM 2703#======================================================================== 2704######################################################################### 2705## StrongARM Systems 2706######################################################################### 2707 2708assabet_config : unconfig 2709 @$(MKCONFIG) $(@:_config=) arm sa1100 assabet 2710 2711dnp1110_config : unconfig 2712 @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110 2713 2714gcplus_config : unconfig 2715 @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus 2716 2717lart_config : unconfig 2718 @$(MKCONFIG) $(@:_config=) arm sa1100 lart 2719 2720shannon_config : unconfig 2721 @$(MKCONFIG) $(@:_config=) arm sa1100 shannon 2722 2723######################################################################### 2724## ARM92xT Systems 2725######################################################################### 2726 2727######################################################################### 2728## Atmel AT91RM9200 Systems 2729######################################################################### 2730 2731at91rm9200dk_config : unconfig 2732 @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 2733 2734at91rm9200ek_config : unconfig 2735 @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200 2736 2737cmc_pu2_config : unconfig 2738 @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 2739 2740csb637_config : unconfig 2741 @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200 2742 2743kb9202_config : unconfig 2744 @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200 2745 2746m501sk_config : unconfig 2747 @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200 2748 2749mp2usb_config : unconfig 2750 @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200 2751 2752######################################################################### 2753## Atmel ARM926EJ-S Systems 2754######################################################################### 2755 2756afeb9260_config: unconfig 2757 @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91 2758 2759at91cap9adk_config : unconfig 2760 @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91 2761 2762at91sam9260ek_nandflash_config \ 2763at91sam9260ek_dataflash_cs0_config \ 2764at91sam9260ek_dataflash_cs1_config \ 2765at91sam9260ek_config \ 2766at91sam9g20ek_nandflash_config \ 2767at91sam9g20ek_dataflash_cs0_config \ 2768at91sam9g20ek_dataflash_cs1_config \ 2769at91sam9g20ek_config : unconfig 2770 @mkdir -p $(obj)include 2771 @if [ "$(findstring 9g20,$@)" ] ; then \ 2772 echo "#define CONFIG_AT91SAM9G20EK 1" >>$(obj)include/config.h ; \ 2773 $(XECHO) "... 9G20 Variant" ; \ 2774 else \ 2775 echo "#define CONFIG_AT91SAM9260EK 1" >>$(obj)include/config.h ; \ 2776 fi; 2777 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2778 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2779 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2780 elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ 2781 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ 2782 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2783 else \ 2784 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ 2785 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ 2786 fi; 2787 @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 2788 2789at91sam9xeek_nandflash_config \ 2790at91sam9xeek_dataflash_cs0_config \ 2791at91sam9xeek_dataflash_cs1_config \ 2792at91sam9xeek_config : unconfig 2793 @mkdir -p $(obj)include 2794 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2795 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2796 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2797 elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ 2798 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ 2799 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2800 else \ 2801 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ 2802 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ 2803 fi; 2804 @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 2805 2806at91sam9261ek_nandflash_config \ 2807at91sam9261ek_dataflash_cs0_config \ 2808at91sam9261ek_dataflash_cs3_config \ 2809at91sam9261ek_config \ 2810at91sam9g10ek_nandflash_config \ 2811at91sam9g10ek_dataflash_cs0_config \ 2812at91sam9g10ek_dataflash_cs3_config \ 2813at91sam9g10ek_config : unconfig 2814 @mkdir -p $(obj)include 2815 @if [ "$(findstring 9g10,$@)" ] ; then \ 2816 echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \ 2817 $(XECHO) "... 9G10 Variant" ; \ 2818 else \ 2819 echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \ 2820 fi; 2821 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2822 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2823 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2824 elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ 2825 echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ 2826 $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \ 2827 else \ 2828 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ 2829 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2830 fi; 2831 @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91 2832 2833at91sam9263ek_norflash_config \ 2834at91sam9263ek_norflash_boot_config \ 2835at91sam9263ek_nandflash_config \ 2836at91sam9263ek_dataflash_config \ 2837at91sam9263ek_dataflash_cs0_config \ 2838at91sam9263ek_config : unconfig 2839 @mkdir -p $(obj)include 2840 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2841 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2842 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2843 elif [ "$(findstring norflash,$@)" ] ; then \ 2844 echo "#define CONFIG_SYS_USE_NORFLASH 1" >>$(obj)include/config.h ; \ 2845 $(XECHO) "... with environment variable in NOR FLASH" ; \ 2846 else \ 2847 echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ 2848 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2849 fi; 2850 @if [ "$(findstring norflash_boot,$@)" ] ; then \ 2851 echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1" >>$(obj)include/config.h ; \ 2852 $(XECHO) "... and boot from NOR FLASH" ; \ 2853 fi; 2854 @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91 2855 2856at91sam9rlek_nandflash_config \ 2857at91sam9rlek_dataflash_config \ 2858at91sam9rlek_dataflash_cs0_config \ 2859at91sam9rlek_config : unconfig 2860 @mkdir -p $(obj)include 2861 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2862 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2863 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2864 else \ 2865 echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ 2866 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2867 fi; 2868 @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 2869 2870meesc_config : unconfig 2871 @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91 2872 2873pm9261_config : unconfig 2874 @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91 2875 2876at91sam9m10g45ek_nandflash_config \ 2877at91sam9m10g45ek_dataflash_config \ 2878at91sam9m10g45ek_dataflash_cs0_config \ 2879at91sam9m10g45ek_config \ 2880at91sam9g45ekes_nandflash_config \ 2881at91sam9g45ekes_dataflash_config \ 2882at91sam9g45ekes_dataflash_cs0_config \ 2883at91sam9g45ekes_config : unconfig 2884 @mkdir -p $(obj)include 2885 @if [ "$(findstring 9m10,$@)" ] ; then \ 2886 echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \ 2887 $(XECHO) "... 9M10G45 Variant" ; \ 2888 else \ 2889 echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \ 2890 fi; 2891 2892 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2893 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2894 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2895 else \ 2896 echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \ 2897 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2898 fi; 2899 @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 2900 2901pm9263_config : unconfig 2902 @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91 2903 2904SBC35_A9G20_NANDFLASH_config \ 2905SBC35_A9G20_EEPROM_config \ 2906SBC35_A9G20_config : unconfig 2907 @mkdir -p $(obj)include 2908 @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 2909 @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91 2910 2911TNY_A9G20_NANDFLASH_config \ 2912TNY_A9G20_EEPROM_config \ 2913TNY_A9G20_config \ 2914TNY_A9260_NANDFLASH_config \ 2915TNY_A9260_EEPROM_config \ 2916TNY_A9260_config : unconfig 2917 @mkdir -p $(obj)include 2918 @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 2919 @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91 2920 2921######################################################################## 2922## ARM Integrator boards - see doc/README-integrator for more info. 2923integratorap_config \ 2924ap_config \ 2925ap966_config \ 2926ap922_config \ 2927ap922_XA10_config \ 2928ap7_config \ 2929ap720t_config \ 2930ap920t_config \ 2931ap926ejs_config \ 2932ap946es_config: unconfig 2933 @board/armltd/integrator/split_by_variant.sh ap $@ 2934 2935integratorcp_config \ 2936cp_config \ 2937cp920t_config \ 2938cp926ejs_config \ 2939cp946es_config \ 2940cp1136_config \ 2941cp966_config \ 2942cp922_config \ 2943cp922_XA10_config \ 2944cp1026_config: unconfig 2945 @board/armltd/integrator/split_by_variant.sh cp $@ 2946 2947davinci_dvevm_config : unconfig 2948 @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci 2949 2950davinci_schmoogie_config : unconfig 2951 @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci 2952 2953davinci_sffsdr_config : unconfig 2954 @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci 2955 2956davinci_sonata_config : unconfig 2957 @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci 2958 2959davinci_dm355evm_config : unconfig 2960 @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci 2961 2962davinci_dm365evm_config : unconfig 2963 @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci 2964 2965imx27lite_config: unconfig 2966 @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27 2967 2968lpd7a400_config \ 2969lpd7a404_config: unconfig 2970 @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x 2971 2972mv88f6281gtw_ge_config: unconfig 2973 @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood 2974 2975mx1ads_config : unconfig 2976 @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx 2977 2978mx1fs2_config : unconfig 2979 @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx 2980 2981netstar_config: unconfig 2982 @$(MKCONFIG) $(@:_config=) arm arm925t netstar 2983 2984nhk8815_config \ 2985nhk8815_onenand_config: unconfig 2986 @mkdir -p $(obj)include 2987 @ > $(obj)include/config.h 2988 @if [ "$(findstring _onenand, $@)" ] ; then \ 2989 echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \ 2990 $(XECHO) "... configured to boot from OneNand Flash"; \ 2991 else \ 2992 $(XECHO) "... configured to boot from Nand Flash"; \ 2993 fi 2994 @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik 2995 2996omap1510inn_config : unconfig 2997 @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti 2998 2999xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) 3000 3001omap1610inn_config \ 3002omap1610inn_cs0boot_config \ 3003omap1610inn_cs3boot_config \ 3004omap1610inn_cs_autoboot_config \ 3005omap1610h2_config \ 3006omap1610h2_cs0boot_config \ 3007omap1610h2_cs3boot_config \ 3008omap1610h2_cs_autoboot_config: unconfig 3009 @mkdir -p $(obj)include 3010 @if [ "$(findstring _cs0boot_, $@)" ] ; then \ 3011 echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \ 3012 $(XECHO) "... configured for CS0 boot"; \ 3013 elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ 3014 echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \ 3015 $(XECHO) "... configured for CS_AUTO boot"; \ 3016 else \ 3017 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ 3018 $(XECHO) "... configured for CS3 boot"; \ 3019 fi; 3020 @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap 3021 3022omap5912osk_config : unconfig 3023 @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap 3024 3025xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) 3026 3027omap730p2_config \ 3028omap730p2_cs0boot_config \ 3029omap730p2_cs3boot_config : unconfig 3030 @mkdir -p $(obj)include 3031 @if [ "$(findstring _cs0boot_, $@)" ] ; then \ 3032 echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \ 3033 $(XECHO) "... configured for CS0 boot"; \ 3034 else \ 3035 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ 3036 $(XECHO) "... configured for CS3 boot"; \ 3037 fi; 3038 @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap 3039 3040rd6281a_config: unconfig 3041 @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood 3042 3043sbc2410x_config: unconfig 3044 @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 3045 3046scb9328_config : unconfig 3047 @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx 3048 3049sheevaplug_config: unconfig 3050 @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood 3051 3052smdk2400_config : unconfig 3053 @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0 3054 3055smdk2410_config : unconfig 3056 @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0 3057 3058SX1_stdout_serial_config \ 3059SX1_config: unconfig 3060 @mkdir -p $(obj)include 3061 @if [ "$(findstring _stdout_serial_, $@)" ] ; then \ 3062 echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ 3063 $(XECHO) "... configured for stdout serial"; \ 3064 else \ 3065 echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ 3066 $(XECHO) "... configured for stdout usbtty"; \ 3067 fi; 3068 @$(MKCONFIG) SX1 arm arm925t sx1 3069 3070# TRAB default configuration: 8 MB Flash, 32 MB RAM 3071xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1)))) 3072 3073trab_config \ 3074trab_bigram_config \ 3075trab_bigflash_config \ 3076trab_old_config: unconfig 3077 @mkdir -p $(obj)include 3078 @mkdir -p $(obj)board/trab 3079 @[ -z "$(findstring _bigram,$@)" ] || \ 3080 { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ 3081 echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \ 3082 $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \ 3083 } 3084 @[ -z "$(findstring _bigflash,$@)" ] || \ 3085 { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \ 3086 echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ 3087 $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \ 3088 echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ 3089 } 3090 @[ -z "$(findstring _old,$@)" ] || \ 3091 { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ 3092 echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ 3093 $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \ 3094 echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ 3095 } 3096 @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 3097 3098VCMA9_config : unconfig 3099 @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0 3100 3101######################################################################### 3102# ARM supplied Versatile development boards 3103######################################################################### 3104 3105cm4008_config : unconfig 3106 @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695 3107 3108cm41xx_config : unconfig 3109 @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 3110 3111versatile_config \ 3112versatileab_config \ 3113versatilepb_config : unconfig 3114 @board/armltd/versatile/split_by_variant.sh $@ 3115 3116voiceblue_config: unconfig 3117 @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue 3118 3119######################################################################### 3120## S3C44B0 Systems 3121######################################################################### 3122 3123B2_config : unconfig 3124 @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave 3125 3126######################################################################### 3127## ARM720T Systems 3128######################################################################### 3129 3130armadillo_config: unconfig 3131 @$(MKCONFIG) $(@:_config=) arm arm720t armadillo 3132 3133ep7312_config : unconfig 3134 @$(MKCONFIG) $(@:_config=) arm arm720t ep7312 3135 3136impa7_config : unconfig 3137 @$(MKCONFIG) $(@:_config=) arm arm720t impa7 3138 3139modnet50_config : unconfig 3140 @$(MKCONFIG) $(@:_config=) arm arm720t modnet50 3141 3142evb4510_config : unconfig 3143 @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b 3144 3145lpc2292sodimm_config: unconfig 3146 @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292 3147 3148SMN42_config : unconfig 3149 @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292 3150 3151######################################################################### 3152## ARM CORTEX Systems 3153######################################################################### 3154 3155devkit8000_config : unconfig 3156 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3 3157 3158omap3_beagle_config : unconfig 3159 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle ti omap3 3160 3161omap3_overo_config : unconfig 3162 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo NULL omap3 3163 3164omap3_evm_config : unconfig 3165 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3 3166 3167omap3_pandora_config : unconfig 3168 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3 3169 3170omap3_zoom1_config : unconfig 3171 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 logicpd omap3 3172 3173omap3_zoom2_config : unconfig 3174 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3 3175 3176######################################################################### 3177## XScale Systems 3178######################################################################### 3179 3180actux1_config : unconfig 3181 @$(MKCONFIG) $(@:_config=) arm ixp actux1 3182 3183actux2_config : unconfig 3184 @$(MKCONFIG) $(@:_config=) arm ixp actux2 3185 3186actux3_config : unconfig 3187 @$(MKCONFIG) $(@:_config=) arm ixp actux3 3188 3189actux4_config : unconfig 3190 @$(MKCONFIG) $(@:_config=) arm ixp actux4 3191 3192cerf250_config : unconfig 3193 @$(MKCONFIG) $(@:_config=) arm pxa cerf250 3194 3195cradle_config : unconfig 3196 @$(MKCONFIG) $(@:_config=) arm pxa cradle 3197 3198csb226_config : unconfig 3199 @$(MKCONFIG) $(@:_config=) arm pxa csb226 3200 3201delta_config : unconfig 3202 @$(MKCONFIG) $(@:_config=) arm pxa delta 3203 3204innokom_config : unconfig 3205 @$(MKCONFIG) $(@:_config=) arm pxa innokom 3206 3207ixdp425_config : unconfig 3208 @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 3209 3210ixdpg425_config : unconfig 3211 @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 3212 3213lubbock_config : unconfig 3214 @$(MKCONFIG) $(@:_config=) arm pxa lubbock 3215 3216pleb2_config : unconfig 3217 @$(MKCONFIG) $(@:_config=) arm pxa pleb2 3218 3219logodl_config : unconfig 3220 @$(MKCONFIG) $(@:_config=) arm pxa logodl 3221 3222pdnb3_config \ 3223scpu_config: unconfig 3224 @mkdir -p $(obj)include 3225 @if [ "$(findstring scpu_,$@)" ] ; then \ 3226 echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \ 3227 $(XECHO) "... on SCPU board variant" ; \ 3228 fi 3229 @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive 3230 3231pxa255_idp_config: unconfig 3232 @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp 3233 3234polaris_config \ 3235trizepsiv_config : unconfig 3236 @mkdir -p $(obj)include 3237 @if [ "$(findstring polaris,$@)" ] ; then \ 3238 echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \ 3239 fi; 3240 @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv 3241 3242wepep250_config : unconfig 3243 @$(MKCONFIG) $(@:_config=) arm pxa wepep250 3244 3245xaeniax_config : unconfig 3246 @$(MKCONFIG) $(@:_config=) arm pxa xaeniax 3247 3248xm250_config : unconfig 3249 @$(MKCONFIG) $(@:_config=) arm pxa xm250 3250 3251xsengine_config : unconfig 3252 @$(MKCONFIG) $(@:_config=) arm pxa xsengine 3253 3254zylonite_config : 3255 @$(MKCONFIG) $(@:_config=) arm pxa zylonite 3256 3257######################################################################### 3258## ARM1136 Systems 3259######################################################################### 3260 3261apollon_config : unconfig 3262 @mkdir -p $(obj)include 3263 @mkdir -p $(obj)onenand_ipl/board/apollon 3264 @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h 3265 @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx 3266 @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk 3267 3268imx31_litekit_config : unconfig 3269 @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31 3270 3271imx31_phycore_eet_config \ 3272imx31_phycore_config : unconfig 3273 @mkdir -p $(obj)include 3274 @if [ -n "$(findstring _eet_,$@)" ]; then \ 3275 echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \ 3276 fi 3277 @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31 3278 3279mx31ads_config : unconfig 3280 @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31 3281 3282mx31pdk_config \ 3283mx31pdk_nand_config : unconfig 3284 @mkdir -p $(obj)include 3285 @if [ -n "$(findstring _nand_,$@)" ]; then \ 3286 echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h; \ 3287 else \ 3288 echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \ 3289 echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h; \ 3290 fi 3291 @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31 3292 3293omap2420h4_config : unconfig 3294 @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx 3295 3296qong_config : unconfig 3297 @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31 3298 3299######################################################################### 3300## ARM1176 Systems 3301######################################################################### 3302smdk6400_noUSB_config \ 3303smdk6400_config : unconfig 3304 @mkdir -p $(obj)include $(obj)board/samsung/smdk6400 3305 @mkdir -p $(obj)nand_spl/board/samsung/smdk6400 3306 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 3307 @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \ 3308 echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ 3309 $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx; \ 3310 else \ 3311 echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ 3312 $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx; \ 3313 fi 3314 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 3315 3316#======================================================================== 3317# i386 3318#======================================================================== 3319######################################################################### 3320## AMD SC520 CDP 3321######################################################################### 3322eNET_config : unconfig 3323 @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520 3324 3325sc520_cdp_config : unconfig 3326 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520 3327 3328sc520_spunk_config : unconfig 3329 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 3330 3331sc520_spunk_rel_config : unconfig 3332 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 3333 3334#======================================================================== 3335# MIPS 3336#======================================================================== 3337######################################################################### 3338## MIPS32 4Kc 3339######################################################################### 3340 3341xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1)))) 3342 3343incaip_100MHz_config \ 3344incaip_133MHz_config \ 3345incaip_150MHz_config \ 3346incaip_config: unconfig 3347 @mkdir -p $(obj)include 3348 @[ -z "$(findstring _100MHz,$@)" ] || \ 3349 { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \ 3350 $(XECHO) "... with 100MHz system clock" ; \ 3351 } 3352 @[ -z "$(findstring _133MHz,$@)" ] || \ 3353 { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \ 3354 $(XECHO) "... with 133MHz system clock" ; \ 3355 } 3356 @[ -z "$(findstring _150MHz,$@)" ] || \ 3357 { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \ 3358 $(XECHO) "... with 150MHz system clock" ; \ 3359 } 3360 @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip 3361 3362tb0229_config: unconfig 3363 @$(MKCONFIG) $(@:_config=) mips mips tb0229 3364 3365vct_premium_config \ 3366vct_premium_small_config \ 3367vct_premium_onenand_config \ 3368vct_premium_onenand_small_config \ 3369vct_platinum_config \ 3370vct_platinum_small_config \ 3371vct_platinum_onenand_config \ 3372vct_platinum_onenand_small_config \ 3373vct_platinumavc_config \ 3374vct_platinumavc_small_config \ 3375vct_platinumavc_onenand_config \ 3376vct_platinumavc_onenand_small_config: unconfig 3377 @mkdir -p $(obj)include 3378 @if [ "$(findstring _premium,$@)" ] ; then \ 3379 echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \ 3380 $(XECHO) "... on Premium board variant" ; \ 3381 fi 3382 @if [ "$(findstring _platinum_,$@)" ] ; then \ 3383 echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \ 3384 $(XECHO) "... on Platinum board variant" ; \ 3385 fi 3386 @if [ "$(findstring _platinumavc,$@)" ] ; then \ 3387 echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \ 3388 $(XECHO) "... on PlatinumAVC board variant" ; \ 3389 fi 3390 @if [ "$(findstring _onenand,$@)" ] ; then \ 3391 echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \ 3392 $(XECHO) "... on OneNAND board variant" ; \ 3393 fi 3394 @if [ "$(findstring _small,$@)" ] ; then \ 3395 echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \ 3396 $(XECHO) "... stripped down image variant" ; \ 3397 fi 3398 @$(MKCONFIG) -a vct mips mips vct micronas 3399 3400######################################################################### 3401## MIPS32 AU1X00 3402######################################################################### 3403 3404dbau1000_config : unconfig 3405 @mkdir -p $(obj)include 3406 @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h 3407 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3408 3409dbau1100_config : unconfig 3410 @mkdir -p $(obj)include 3411 @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h 3412 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3413 3414dbau1500_config : unconfig 3415 @mkdir -p $(obj)include 3416 @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h 3417 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3418 3419dbau1550_config : unconfig 3420 @mkdir -p $(obj)include 3421 @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h 3422 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3423 3424dbau1550_el_config : unconfig 3425 @mkdir -p $(obj)include 3426 @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h 3427 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3428 3429gth2_config : unconfig 3430 @mkdir -p $(obj)include 3431 @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h 3432 @$(MKCONFIG) -a gth2 mips mips gth2 3433 3434pb1000_config : unconfig 3435 @mkdir -p $(obj)include 3436 @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h 3437 @$(MKCONFIG) -a pb1x00 mips mips pb1x00 3438 3439qemu_mips_config : unconfig 3440 @mkdir -p $(obj)include 3441 @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h 3442 @$(MKCONFIG) -a qemu-mips mips mips qemu-mips 3443 3444######################################################################### 3445## MIPS64 5Kc 3446######################################################################### 3447 3448purple_config : unconfig 3449 @$(MKCONFIG) $(@:_config=) mips mips purple 3450 3451#======================================================================== 3452# Nios 3453#======================================================================== 3454######################################################################### 3455## Nios32 3456######################################################################### 3457 3458ADNPESC1_DNPEVA2_base_32_config \ 3459ADNPESC1_base_32_config \ 3460ADNPESC1_config: unconfig 3461 @mkdir -p $(obj)include 3462 @[ -z "$(findstring _DNPEVA2,$@)" ] || \ 3463 { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \ 3464 $(XECHO) "... DNP/EVA2 configuration" ; \ 3465 } 3466 @[ -z "$(findstring _base_32,$@)" ] || \ 3467 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ 3468 $(XECHO) "... NIOS 'base_32' configuration" ; \ 3469 } 3470 @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ 3471 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ 3472 $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \ 3473 } 3474 @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv 3475 3476DK1C20_safe_32_config \ 3477DK1C20_standard_32_config \ 3478DK1C20_config: unconfig 3479 @mkdir -p $(obj)include 3480 @[ -z "$(findstring _safe_32,$@)" ] || \ 3481 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ 3482 $(XECHO) "... NIOS 'safe_32' configuration" ; \ 3483 } 3484 @[ -z "$(findstring _standard_32,$@)" ] || \ 3485 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3486 $(XECHO) "... NIOS 'standard_32' configuration" ; \ 3487 } 3488 @[ -z "$(findstring DK1C20_config,$@)" ] || \ 3489 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3490 $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ 3491 } 3492 @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera 3493 3494DK1S10_safe_32_config \ 3495DK1S10_standard_32_config \ 3496DK1S10_mtx_ldk_20_config \ 3497DK1S10_config: unconfig 3498 @mkdir -p $(obj)include 3499 @[ -z "$(findstring _safe_32,$@)" ] || \ 3500 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ 3501 $(XECHO) "... NIOS 'safe_32' configuration" ; \ 3502 } 3503 @[ -z "$(findstring _standard_32,$@)" ] || \ 3504 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3505 $(XECHO) "... NIOS 'standard_32' configuration" ; \ 3506 } 3507 @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \ 3508 { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \ 3509 $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \ 3510 } 3511 @[ -z "$(findstring DK1S10_config,$@)" ] || \ 3512 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3513 $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ 3514 } 3515 @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera 3516 3517######################################################################### 3518## Nios-II 3519######################################################################### 3520 3521EP1C20_config : unconfig 3522 @$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 altera 3523 3524EP1S10_config : unconfig 3525 @$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 altera 3526 3527EP1S40_config : unconfig 3528 @$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 altera 3529 3530PK1C20_config : unconfig 3531 @$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyent 3532 3533PCI5441_config : unconfig 3534 @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent 3535 3536#======================================================================== 3537## Microblaze 3538#======================================================================== 3539 3540microblaze-generic_config: unconfig 3541 @mkdir -p $(obj)include 3542 @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx 3543 3544#======================================================================== 3545# Blackfin 3546#======================================================================== 3547 3548# Analog Devices boards 3549BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \ 3550 bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit 3551 3552# Bluetechnix tinyboards 3553BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf537u cm-bf548 cm-bf561 tcm-bf537 3554 3555# Misc third party boards 3556BFIN_BOARDS += bf537-minotaur bf537-srv1 blackstamp 3557 3558# I-SYST Micromodule 3559BFIN_BOARDS += ibf-dsp561 3560 3561$(BFIN_BOARDS:%=%_config) : unconfig 3562 @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=) 3563 3564$(BFIN_BOARDS): 3565 $(MAKE) $@_config 3566 $(MAKE) 3567 3568#======================================================================== 3569# AVR32 3570#======================================================================== 3571 3572atngw100_config : unconfig 3573 @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x 3574 3575atstk1002_config : unconfig 3576 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3577 3578atstk1003_config : unconfig 3579 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3580 3581atstk1004_config : unconfig 3582 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3583 3584atstk1006_config : unconfig 3585 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3586 3587favr-32-ezkit_config : unconfig 3588 @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x 3589 3590hammerhead_config : unconfig 3591 @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x 3592 3593mimc200_config : unconfig 3594 @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x 3595 3596#======================================================================== 3597# SH3 (SuperH) 3598#======================================================================== 3599 3600######################################################################### 3601## sh2 (Renesas SuperH) 3602######################################################################### 3603rsk7203_config: unconfig 3604 @mkdir -p $(obj)include 3605 @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h 3606 @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas 3607 3608######################################################################### 3609## sh3 (Renesas SuperH) 3610######################################################################### 3611 3612mpr2_config: unconfig 3613 @mkdir -p $(obj)include 3614 @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h 3615 @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2 3616 3617ms7720se_config: unconfig 3618 @mkdir -p $(obj)include 3619 @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h 3620 @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se 3621 3622######################################################################### 3623## sh4 (Renesas SuperH) 3624######################################################################### 3625 3626MigoR_config : unconfig 3627 @mkdir -p $(obj)include 3628 @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h 3629 @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas 3630 3631ms7750se_config: unconfig 3632 @mkdir -p $(obj)include 3633 @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h 3634 @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se 3635 3636ms7722se_config : unconfig 3637 @mkdir -p $(obj)include 3638 @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h 3639 @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se 3640 3641r2dplus_config : unconfig 3642 @mkdir -p $(obj)include 3643 @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h 3644 @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas 3645 3646r7780mp_config: unconfig 3647 @mkdir -p $(obj)include 3648 @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h 3649 @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas 3650 3651sh7763rdp_config : unconfig 3652 @mkdir -p $(obj)include 3653 @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h 3654 @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas 3655 3656xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1)) 3657sh7785lcr_32bit_config \ 3658sh7785lcr_config : unconfig 3659 @mkdir -p $(obj)include 3660 @mkdir -p $(obj)board/renesas/sh7785lcr 3661 @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h 3662 @if [ "$(findstring 32bit, $@)" ] ; then \ 3663 echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \ 3664 echo "TEXT_BASE = 0x8ff80000" > \ 3665 $(obj)board/renesas/sh7785lcr/config.tmp ; \ 3666 $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \ 3667 fi 3668 @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas 3669 3670ap325rxa_config : unconfig 3671 @mkdir -p $(obj)include 3672 @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h 3673 @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas 3674 3675espt_config : unconfig 3676 @mkdir -p $(obj)include 3677 @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h 3678 @$(MKCONFIG) -a $(@:_config=) sh sh4 espt 3679 3680#======================================================================== 3681# SPARC 3682#======================================================================== 3683 3684######################################################################### 3685## LEON3 3686######################################################################### 3687 3688# Gaisler GR-XC3S-1500 board 3689gr_xc3s_1500_config : unconfig 3690 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler 3691 3692# Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system 3693gr_cpci_ax2000_config : unconfig 3694 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler 3695 3696# Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS 3697# Development board Stratix II edition, FPGA Device EP2S60. 3698gr_ep2s60_config: unconfig 3699 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler 3700 3701# Gaisler LEON3 GRSIM simulator 3702grsim_config : unconfig 3703 @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler 3704 3705######################################################################### 3706## LEON2 3707######################################################################### 3708 3709# Gaisler LEON2 GRSIM simulator 3710grsim_leon2_config : unconfig 3711 @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler 3712 3713######################################################################### 3714######################################################################### 3715######################################################################### 3716 3717clean: 3718 @rm -f $(obj)examples/standalone/82559_eeprom \ 3719 $(obj)examples/standalone/atmel_df_pow2 \ 3720 $(obj)examples/standalone/eepro100_eeprom \ 3721 $(obj)examples/standalone/hello_world \ 3722 $(obj)examples/standalone/interrupt \ 3723 $(obj)examples/standalone/mem_to_mem_idma2intr \ 3724 $(obj)examples/standalone/sched \ 3725 $(obj)examples/standalone/smc91111_eeprom \ 3726 $(obj)examples/standalone/test_burst \ 3727 $(obj)examples/standalone/timer 3728 @rm -f $(obj)examples/api/demo{,.bin} 3729 @rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \ 3730 $(obj)tools/env/{fw_printenv,fw_setenv} \ 3731 $(obj)tools/envcrc \ 3732 $(obj)tools/gdb/{astest,gdbcont,gdbsend} \ 3733 $(obj)tools/gen_eth_addr $(obj)tools/img2srec \ 3734 $(obj)tools/mkimage $(obj)tools/mpc86x_clk \ 3735 $(obj)tools/ncb $(obj)tools/ubsha1 3736 @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \ 3737 $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \ 3738 $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \ 3739 $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \ 3740 $(obj)lib_blackfin/u-boot.lds \ 3741 $(obj)u-boot.lds \ 3742 $(obj)cpu/blackfin/bootrom-asm-offsets.[chs] 3743 @rm -f $(obj)include/bmp_logo.h 3744 @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map} 3745 @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map} 3746 @rm -f $(obj)onenand_ipl/u-boot.lds 3747 @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE) 3748 @find $(OBJTREE) -type f \ 3749 \( -name 'core' -o -name '*.bak' -o -name '*~' \ 3750 -o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \ 3751 | xargs rm -f 3752 3753clobber: clean 3754 @find $(OBJTREE) -type f \( -name .depend \ 3755 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \ 3756 -print0 \ 3757 | xargs -0 rm -f 3758 @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \ 3759 $(obj)cscope.* $(obj)*.*~ 3760 @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) 3761 @rm -f $(obj)u-boot.kwb 3762 @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes} 3763 @rm -f $(obj)cpu/mpc824x/bedbug_603e.c 3764 @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm 3765 @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f 3766 @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f 3767 3768ifeq ($(OBJTREE),$(SRCTREE)) 3769mrproper \ 3770distclean: clobber unconfig 3771else 3772mrproper \ 3773distclean: clobber unconfig 3774 rm -rf $(obj)* 3775endif 3776 3777backup: 3778 F=`basename $(TOPDIR)` ; cd .. ; \ 3779 gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F 3780 3781######################################################################### 3782