1# 2# (C) Copyright 2000-2006 3# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4# 5# See file CREDITS for list of people who contributed to this 6# project. 7# 8# This program is free software; you can redistribute it and/or 9# modify it under the terms of the GNU General Public License as 10# published by the Free Software Foundatio; either version 2 of 11# the License, or (at your option) any later version. 12# 13# This program is distributed in the hope that it will be useful, 14# but WITHOUT ANY WARRANTY; without even the implied warranty of 15# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16# GNU General Public License for more details. 17# 18# You should have received a copy of the GNU General Public License 19# along with this program; if not, write to the Free Software 20# Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21# MA 02111-1307 USA 22# 23 24VERSION = 1 25PATCHLEVEL = 1 26SUBLEVEL = 4 27EXTRAVERSION = 28U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) 29VERSION_FILE = include/version_autogenerated.h 30 31HOSTARCH := $(shell uname -m | \ 32 sed -e s/i.86/i386/ \ 33 -e s/sun4u/sparc64/ \ 34 -e s/arm.*/arm/ \ 35 -e s/sa110/arm/ \ 36 -e s/powerpc/ppc/ \ 37 -e s/macppc/ppc/) 38 39HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ 40 sed -e 's/\(cygwin\).*/cygwin/') 41 42export HOSTARCH HOSTOS 43 44# Deal with colliding definitions from tcsh etc. 45VENDOR= 46 47######################################################################### 48 49TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi) 50export TOPDIR 51 52ifeq (include/config.mk,$(wildcard include/config.mk)) 53# load ARCH, BOARD, and CPU configuration 54include include/config.mk 55export ARCH CPU BOARD VENDOR SOC 56ifndef CROSS_COMPILE 57ifeq ($(HOSTARCH),ppc) 58CROSS_COMPILE = 59else 60ifeq ($(ARCH),ppc) 61CROSS_COMPILE = powerpc-linux- 62endif 63ifeq ($(ARCH),arm) 64CROSS_COMPILE = arm-linux- 65endif 66ifeq ($(ARCH),i386) 67ifeq ($(HOSTARCH),i386) 68CROSS_COMPILE = 69else 70CROSS_COMPILE = i386-linux- 71endif 72endif 73ifeq ($(ARCH),mips) 74CROSS_COMPILE = mips_4KC- 75endif 76ifeq ($(ARCH),nios) 77CROSS_COMPILE = nios-elf- 78endif 79ifeq ($(ARCH),nios2) 80CROSS_COMPILE = nios2-elf- 81endif 82ifeq ($(ARCH),m68k) 83CROSS_COMPILE = m68k-elf- 84endif 85ifeq ($(ARCH),microblaze) 86CROSS_COMPILE = mb- 87endif 88ifeq ($(ARCH),blackfin) 89CROSS_COMPILE = bfin-elf- 90endif 91endif 92endif 93 94export CROSS_COMPILE 95 96# load other configuration 97include $(TOPDIR)/config.mk 98 99 100######################################################################### 101# U-Boot objects....order is important (i.e. start must be first) 102 103OBJS = cpu/$(CPU)/start.o 104ifeq ($(CPU),i386) 105OBJS += cpu/$(CPU)/start16.o 106OBJS += cpu/$(CPU)/reset.o 107endif 108ifeq ($(CPU),ppc4xx) 109OBJS += cpu/$(CPU)/resetvec.o 110endif 111ifeq ($(CPU),mpc83xx) 112OBJS += cpu/$(CPU)/resetvec.o 113endif 114ifeq ($(CPU),mpc85xx) 115OBJS += cpu/$(CPU)/resetvec.o 116endif 117ifeq ($(CPU),bf533) 118OBJS += cpu/$(CPU)/start1.o cpu/$(CPU)/interrupt.o cpu/$(CPU)/cache.o 119OBJS += cpu/$(CPU)/cplbhdlr.o cpu/$(CPU)/cplbmgr.o cpu/$(CPU)/flush.o 120endif 121 122LIBS = lib_generic/libgeneric.a 123LIBS += board/$(BOARDDIR)/lib$(BOARD).a 124LIBS += cpu/$(CPU)/lib$(CPU).a 125ifdef SOC 126LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a 127endif 128LIBS += lib_$(ARCH)/lib$(ARCH).a 129LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \ 130 fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a 131LIBS += net/libnet.a 132LIBS += disk/libdisk.a 133LIBS += rtc/librtc.a 134LIBS += dtt/libdtt.a 135LIBS += drivers/libdrivers.a 136LIBS += drivers/nand/libnand.a 137LIBS += drivers/nand_legacy/libnand_legacy.a 138LIBS += drivers/sk98lin/libsk98lin.a 139LIBS += post/libpost.a post/cpu/libcpu.a 140LIBS += common/libcommon.a 141LIBS += $(BOARDLIBS) 142.PHONY : $(LIBS) 143 144# Add GCC lib 145PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc 146 147 148# The "tools" are needed early, so put this first 149# Don't include stuff already done in $(LIBS) 150SUBDIRS = tools \ 151 examples \ 152 post \ 153 post/cpu 154.PHONY : $(SUBDIRS) 155 156######################################################################### 157######################################################################### 158 159ALL = u-boot.srec u-boot.bin System.map 160 161all: $(ALL) 162 163u-boot.hex: u-boot 164 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ 165 166u-boot.srec: u-boot 167 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ 168 169u-boot.bin: u-boot 170 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ 171 172u-boot.img: u-boot.bin 173 ./tools/mkimage -A $(ARCH) -T firmware -C none \ 174 -a $(TEXT_BASE) -e 0 \ 175 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ 176 sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ 177 -d $< $@ 178 179u-boot.dis: u-boot 180 $(OBJDUMP) -d $< > $@ 181 182u-boot: depend version $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT) 183 UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ 184 $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \ 185 --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \ 186 -Map u-boot.map -o u-boot 187 188$(LIBS): 189 $(MAKE) -C `dirname $@` 190 191$(SUBDIRS): 192 $(MAKE) -C $@ all 193 194version: 195 @echo -n "#define U_BOOT_VERSION \"U-Boot " > $(VERSION_FILE); \ 196 echo -n "$(U_BOOT_VERSION)" >> $(VERSION_FILE); \ 197 echo -n $(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion \ 198 $(TOPDIR)) >> $(VERSION_FILE); \ 199 echo "\"" >> $(VERSION_FILE) 200 201gdbtools: 202 $(MAKE) -C tools/gdb || exit 1 203 204depend dep: 205 @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done 206 207tags: 208 ctags -w `find $(SUBDIRS) include \ 209 lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \ 210 fs/cramfs fs/fat fs/fdos fs/jffs2 \ 211 net disk rtc dtt drivers drivers/sk98lin common \ 212 \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` 213 214etags: 215 etags -a `find $(SUBDIRS) include \ 216 lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \ 217 fs/cramfs fs/fat fs/fdos fs/jffs2 \ 218 net disk rtc dtt drivers drivers/sk98lin common \ 219 \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` 220 221System.map: u-boot 222 @$(NM) $< | \ 223 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ 224 sort > System.map 225 226######################################################################### 227else 228all install u-boot u-boot.srec depend dep: 229 @echo "System not configured - see README" >&2 230 @ exit 1 231endif 232 233######################################################################### 234 235unconfig: 236 @rm -f include/config.h include/config.mk board/*/config.tmp 237 238#======================================================================== 239# PowerPC 240#======================================================================== 241 242######################################################################### 243## MPC5xx Systems 244######################################################################### 245 246canmb_config: unconfig 247 @./mkconfig -a canmb ppc mpc5xxx canmb 248 249cmi_mpc5xx_config: unconfig 250 @./mkconfig $(@:_config=) ppc mpc5xx cmi 251 252PATI_config: unconfig 253 @./mkconfig $(@:_config=) ppc mpc5xx pati mpl 254 255######################################################################### 256## MPC5xxx Systems 257######################################################################### 258 259aev_config: unconfig 260 @./mkconfig -a aev ppc mpc5xxx tqm5200 261 262BC3450_config: unconfig 263 @./mkconfig -a BC3450 ppc mpc5xxx bc3450 264 265cpci5200_config: unconfig 266 @./mkconfig -a cpci5200 ppc mpc5xxx cpci5200 esd 267 268hmi1001_config: unconfig 269 @./mkconfig hmi1001 ppc mpc5xxx hmi1001 270 271Lite5200_config \ 272Lite5200_LOWBOOT_config \ 273Lite5200_LOWBOOT08_config \ 274icecube_5200_config \ 275icecube_5200_LOWBOOT_config \ 276icecube_5200_LOWBOOT08_config \ 277icecube_5200_DDR_config \ 278icecube_5200_DDR_LOWBOOT_config \ 279icecube_5200_DDR_LOWBOOT08_config \ 280icecube_5100_config: unconfig 281 @ >include/config.h 282 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 283 { if [ "$(findstring DDR,$@)" ] ; \ 284 then echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \ 285 else echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \ 286 fi ; \ 287 echo "... with LOWBOOT configuration" ; \ 288 } 289 @[ -z "$(findstring LOWBOOT08,$@)" ] || \ 290 { echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \ 291 echo "... with 8 MB flash only" ; \ 292 echo "... with LOWBOOT configuration" ; \ 293 } 294 @[ -z "$(findstring DDR,$@)" ] || \ 295 { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \ 296 echo "... DDR memory revision" ; \ 297 } 298 @[ -z "$(findstring 5200,$@)" ] || \ 299 { echo "#define CONFIG_MPC5200" >>include/config.h ; \ 300 echo "... with MPC5200 processor" ; \ 301 } 302 @[ -z "$(findstring 5100,$@)" ] || \ 303 { echo "#define CONFIG_MGT5100" >>include/config.h ; \ 304 echo "... with MGT5100 processor" ; \ 305 } 306 @./mkconfig -a IceCube ppc mpc5xxx icecube 307 308inka4x0_config: unconfig 309 @./mkconfig inka4x0 ppc mpc5xxx inka4x0 310 311lite5200b_config \ 312lite5200b_LOWBOOT_config: unconfig 313 @ >include/config.h 314 @ echo "#define CONFIG_MPC5200_DDR" >>include/config.h 315 @ echo "... DDR memory revision" 316 @ echo "#define CONFIG_MPC5200" >>include/config.h 317 @ echo "#define CONFIG_LITE5200B" >>include/config.h 318 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 319 { echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \ 320 echo "... with LOWBOOT configuration" ; \ 321 } 322 @ echo "... with MPC5200B processor" 323 @./mkconfig -a IceCube ppc mpc5xxx icecube 324 325mcc200_config \ 326mcc200_SDRAM \ 327mcc200_highboot \ 328mcc200_COM12 \ 329mcc200_highboot_SDRAM: unconfig 330 @ >include/config.h 331 @[ -n "$(findstring highboot,$@)" ] || \ 332 { echo "... with lowboot configuration" ; \ 333 } 334 @[ -z "$(findstring highboot,$@)" ] || \ 335 { echo "TEXT_BASE = 0xFFF00000" >board/mcc200/config.tmp ; \ 336 echo "... with highboot configuration" ; \ 337 } 338 @[ -n "$(findstring _SDRAM,$@)" ] || \ 339 { echo "... with DDR" ; \ 340 } 341 @[ -z "$(findstring _SDRAM,$@)" ] || \ 342 { echo "#define CONFIG_MCC200_SDRAM" >>include/config.h ; \ 343 echo "... with SDRAM" ; \ 344 } 345 @[ -z "$(findstring COM12,$@)" ] || \ 346 { echo "#define CONFIG_CONSOLE_COM12" >>include/config.h ; \ 347 echo "... with console on COM12" ; \ 348 } 349 @./mkconfig -a mcc200 ppc mpc5xxx mcc200 350 351o2dnt_config: 352 @./mkconfig o2dnt ppc mpc5xxx o2dnt 353 354pf5200_config: unconfig 355 @./mkconfig pf5200 ppc mpc5xxx pf5200 esd 356 357PM520_config \ 358PM520_DDR_config \ 359PM520_ROMBOOT_config \ 360PM520_ROMBOOT_DDR_config: unconfig 361 @ >include/config.h 362 @[ -z "$(findstring DDR,$@)" ] || \ 363 { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \ 364 echo "... DDR memory revision" ; \ 365 } 366 @[ -z "$(findstring ROMBOOT,$@)" ] || \ 367 { echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \ 368 echo "... booting from 8-bit flash" ; \ 369 } 370 @./mkconfig -a PM520 ppc mpc5xxx pm520 371 372smmaco4_config: unconfig 373 @./mkconfig -a smmaco4 ppc mpc5xxx tqm5200 374 375spieval_config: unconfig 376 @./mkconfig -a spieval ppc mpc5xxx tqm5200 377 378TB5200_B_config \ 379TB5200_config: unconfig 380 @[ -z "$(findstring _B,$@)" ] || \ 381 { echo "#define CONFIG_TQM5200_B" >>include/config.h ; \ 382 echo "... with MPC5200B processor" ; \ 383 } 384 @./mkconfig -n $@ -a TB5200 ppc mpc5xxx tqm5200 385 386MINI5200_config \ 387EVAL5200_config \ 388TOP5200_config: unconfig 389 @ echo "#define CONFIG_$(@:_config=) 1" >include/config.h 390 @./mkconfig -n $@ -a TOP5200 ppc mpc5xxx top5200 emk 391 392Total5100_config \ 393Total5200_config \ 394Total5200_lowboot_config \ 395Total5200_Rev2_config \ 396Total5200_Rev2_lowboot_config: unconfig 397 @ >include/config.h 398 @[ -z "$(findstring 5100,$@)" ] || \ 399 { echo "#define CONFIG_MGT5100" >>include/config.h ; \ 400 echo "... with MGT5100 processor" ; \ 401 } 402 @[ -z "$(findstring 5200,$@)" ] || \ 403 { echo "#define CONFIG_MPC5200" >>include/config.h ; \ 404 echo "... with MPC5200 processor" ; \ 405 } 406 @[ -n "$(findstring Rev,$@)" ] || \ 407 { echo "#define CONFIG_TOTAL5200_REV 1" >>include/config.h ; \ 408 echo "... revision 1 board" ; \ 409 } 410 @[ -z "$(findstring Rev2_,$@)" ] || \ 411 { echo "#define CONFIG_TOTAL5200_REV 2" >>include/config.h ; \ 412 echo "... revision 2 board" ; \ 413 } 414 @[ -z "$(findstring lowboot_,$@)" ] || \ 415 { echo "TEXT_BASE = 0xFE000000" >board/total5200/config.tmp ; \ 416 echo "... with lowboot configuration" ; \ 417 } 418 @./mkconfig -a Total5200 ppc mpc5xxx total5200 419 420TQM5200_config \ 421TQM5200_B_config \ 422TQM5200_B_HIGHBOOT_config \ 423TQM5200S_config \ 424TQM5200S_HIGHBOOT_config \ 425TQM5200_STK100_config \ 426cam5200_config \ 427MiniFAP_config: unconfig 428 @ >include/config.h 429 @[ -z "$(findstring MiniFAP,$@)" ] || \ 430 { echo "#define CONFIG_MINIFAP" >>include/config.h ; \ 431 echo "... TQM5200_AC on MiniFAP" ; \ 432 } 433 @[ -z "$(findstring cam5200,$@)" ] || \ 434 { echo "#define CONFIG_CAM5200" >>include/config.h ; \ 435 echo "#define CONFIG_TQM5200S" >>include/config.h ; \ 436 echo "#define CONFIG_TQM5200_B" >>include/config.h ; \ 437 echo "... TQM5200S on Cam5200" ; \ 438 } 439 @[ -z "$(findstring STK100,$@)" ] || \ 440 { echo "#define CONFIG_STK52XX_REV100" >>include/config.h ; \ 441 echo "... on a STK52XX.100 base board" ; \ 442 } 443 @[ -z "$(findstring TQM5200_B,$@)" ] || \ 444 { echo "#define CONFIG_TQM5200_B" >>include/config.h ; \ 445 } 446 @[ -z "$(findstring TQM5200S,$@)" ] || \ 447 { echo "#define CONFIG_TQM5200S" >>include/config.h ; \ 448 echo "#define CONFIG_TQM5200_B" >>include/config.h ; \ 449 } 450 @[ -z "$(findstring HIGHBOOT,$@)" ] || \ 451 { echo "TEXT_BASE = 0xFFF00000" >board/tqm5200/config.tmp ; \ 452 } 453 @./mkconfig -n $@ -a TQM5200 ppc mpc5xxx tqm5200 454 455######################################################################### 456## MPC8xx Systems 457######################################################################### 458 459Adder_config \ 460Adder87x_config \ 461AdderII_config \ 462 : unconfig 463 $(if $(findstring AdderII,$@), \ 464 @echo "#define CONFIG_MPC852T" > include/config.h) 465 @./mkconfig -a Adder ppc mpc8xx adder 466 467ADS860_config \ 468FADS823_config \ 469FADS850SAR_config \ 470MPC86xADS_config \ 471MPC885ADS_config \ 472FADS860T_config: unconfig 473 @./mkconfig $(@:_config=) ppc mpc8xx fads 474 475AMX860_config : unconfig 476 @./mkconfig $(@:_config=) ppc mpc8xx amx860 westel 477 478c2mon_config: unconfig 479 @./mkconfig $(@:_config=) ppc mpc8xx c2mon 480 481CCM_config: unconfig 482 @./mkconfig $(@:_config=) ppc mpc8xx CCM siemens 483 484cogent_mpc8xx_config: unconfig 485 @./mkconfig $(@:_config=) ppc mpc8xx cogent 486 487ELPT860_config: unconfig 488 @./mkconfig $(@:_config=) ppc mpc8xx elpt860 LEOX 489 490EP88x_config: unconfig 491 @./mkconfig $(@:_config=) ppc mpc8xx ep88x 492 493ESTEEM192E_config: unconfig 494 @./mkconfig $(@:_config=) ppc mpc8xx esteem192e 495 496ETX094_config : unconfig 497 @./mkconfig $(@:_config=) ppc mpc8xx etx094 498 499FLAGADM_config: unconfig 500 @./mkconfig $(@:_config=) ppc mpc8xx flagadm 501 502xtract_GEN860T = $(subst _SC,,$(subst _config,,$1)) 503 504GEN860T_SC_config \ 505GEN860T_config: unconfig 506 @ >include/config.h 507 @[ -z "$(findstring _SC,$@)" ] || \ 508 { echo "#define CONFIG_SC" >>include/config.h ; \ 509 echo "With reduced H/W feature set (SC)..." ; \ 510 } 511 @./mkconfig -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t 512 513GENIETV_config: unconfig 514 @./mkconfig $(@:_config=) ppc mpc8xx genietv 515 516GTH_config: unconfig 517 @./mkconfig $(@:_config=) ppc mpc8xx gth 518 519hermes_config : unconfig 520 @./mkconfig $(@:_config=) ppc mpc8xx hermes 521 522HMI10_config : unconfig 523 @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx 524 525IAD210_config: unconfig 526 @./mkconfig $(@:_config=) ppc mpc8xx IAD210 siemens 527 528xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) 529 530ICU862_100MHz_config \ 531ICU862_config: unconfig 532 @ >include/config.h 533 @[ -z "$(findstring _100MHz,$@)" ] || \ 534 { echo "#define CONFIG_100MHz" >>include/config.h ; \ 535 echo "... with 100MHz system clock" ; \ 536 } 537 @./mkconfig -a $(call xtract_ICU862,$@) ppc mpc8xx icu862 538 539IP860_config : unconfig 540 @./mkconfig $(@:_config=) ppc mpc8xx ip860 541 542IVML24_256_config \ 543IVML24_128_config \ 544IVML24_config: unconfig 545 @ >include/config.h 546 @[ -z "$(findstring IVML24_config,$@)" ] || \ 547 { echo "#define CONFIG_IVML24_16M" >>include/config.h ; \ 548 } 549 @[ -z "$(findstring IVML24_128_config,$@)" ] || \ 550 { echo "#define CONFIG_IVML24_32M" >>include/config.h ; \ 551 } 552 @[ -z "$(findstring IVML24_256_config,$@)" ] || \ 553 { echo "#define CONFIG_IVML24_64M" >>include/config.h ; \ 554 } 555 @./mkconfig -a IVML24 ppc mpc8xx ivm 556 557IVMS8_256_config \ 558IVMS8_128_config \ 559IVMS8_config: unconfig 560 @ >include/config.h 561 @[ -z "$(findstring IVMS8_config,$@)" ] || \ 562 { echo "#define CONFIG_IVMS8_16M" >>include/config.h ; \ 563 } 564 @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ 565 { echo "#define CONFIG_IVMS8_32M" >>include/config.h ; \ 566 } 567 @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ 568 { echo "#define CONFIG_IVMS8_64M" >>include/config.h ; \ 569 } 570 @./mkconfig -a IVMS8 ppc mpc8xx ivm 571 572KUP4K_config : unconfig 573 @./mkconfig $(@:_config=) ppc mpc8xx kup4k kup 574 575KUP4X_config : unconfig 576 @./mkconfig $(@:_config=) ppc mpc8xx kup4x kup 577 578LANTEC_config : unconfig 579 @./mkconfig $(@:_config=) ppc mpc8xx lantec 580 581lwmon_config: unconfig 582 @./mkconfig $(@:_config=) ppc mpc8xx lwmon 583 584MBX_config \ 585MBX860T_config: unconfig 586 @./mkconfig $(@:_config=) ppc mpc8xx mbx8xx 587 588MHPC_config: unconfig 589 @./mkconfig $(@:_config=) ppc mpc8xx mhpc eltec 590 591MVS1_config : unconfig 592 @./mkconfig $(@:_config=) ppc mpc8xx mvs1 593 594xtract_NETVIA = $(subst _V2,,$(subst _config,,$1)) 595 596NETVIA_V2_config \ 597NETVIA_config: unconfig 598 @ >include/config.h 599 @[ -z "$(findstring NETVIA_config,$@)" ] || \ 600 { echo "#define CONFIG_NETVIA_VERSION 1" >>include/config.h ; \ 601 echo "... Version 1" ; \ 602 } 603 @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ 604 { echo "#define CONFIG_NETVIA_VERSION 2" >>include/config.h ; \ 605 echo "... Version 2" ; \ 606 } 607 @./mkconfig -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia 608 609xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1)) 610 611NETPHONE_V2_config \ 612NETPHONE_config: unconfig 613 @ >include/config.h 614 @[ -z "$(findstring NETPHONE_config,$@)" ] || \ 615 { echo "#define CONFIG_NETPHONE_VERSION 1" >>include/config.h ; \ 616 } 617 @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ 618 { echo "#define CONFIG_NETPHONE_VERSION 2" >>include/config.h ; \ 619 } 620 @./mkconfig -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone 621 622xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1)))) 623 624NETTA_ISDN_6412_SWAPHOOK_config \ 625NETTA_ISDN_SWAPHOOK_config \ 626NETTA_6412_SWAPHOOK_config \ 627NETTA_SWAPHOOK_config \ 628NETTA_ISDN_6412_config \ 629NETTA_ISDN_config \ 630NETTA_6412_config \ 631NETTA_config: unconfig 632 @ >include/config.h 633 @[ -z "$(findstring ISDN_,$@)" ] || \ 634 { echo "#define CONFIG_NETTA_ISDN 1" >>include/config.h ; \ 635 } 636 @[ -n "$(findstring ISDN_,$@)" ] || \ 637 { echo "#undef CONFIG_NETTA_ISDN" >>include/config.h ; \ 638 } 639 @[ -z "$(findstring 6412_,$@)" ] || \ 640 { echo "#define CONFIG_NETTA_6412 1" >>include/config.h ; \ 641 } 642 @[ -n "$(findstring 6412_,$@)" ] || \ 643 { echo "#undef CONFIG_NETTA_6412" >>include/config.h ; \ 644 } 645 @[ -z "$(findstring SWAPHOOK_,$@)" ] || \ 646 { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>include/config.h ; \ 647 } 648 @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ 649 { echo "#undef CONFIG_NETTA_SWAPHOOK" >>include/config.h ; \ 650 } 651 @./mkconfig -a $(call xtract_NETTA,$@) ppc mpc8xx netta 652 653xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1)) 654 655NETTA2_V2_config \ 656NETTA2_config: unconfig 657 @ >include/config.h 658 @[ -z "$(findstring NETTA2_config,$@)" ] || \ 659 { echo "#define CONFIG_NETTA2_VERSION 1" >>include/config.h ; \ 660 } 661 @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ 662 { echo "#define CONFIG_NETTA2_VERSION 2" >>include/config.h ; \ 663 } 664 @./mkconfig -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2 665 666NC650_Rev1_config \ 667NC650_Rev2_config \ 668CP850_config: unconfig 669 @ >include/config.h 670 @[ -z "$(findstring CP850,$@)" ] || \ 671 { echo "#define CONFIG_CP850 1" >>include/config.h ; \ 672 echo "#define CONFIG_IDS852_REV2 1" >>include/config.h ; \ 673 } 674 @[ -z "$(findstring Rev1,$@)" ] || \ 675 { echo "#define CONFIG_IDS852_REV1 1" >>include/config.h ; \ 676 } 677 @[ -z "$(findstring Rev2,$@)" ] || \ 678 { echo "#define CONFIG_IDS852_REV2 1" >>include/config.h ; \ 679 } 680 @./mkconfig -a NC650 ppc mpc8xx nc650 681 682NX823_config: unconfig 683 @./mkconfig $(@:_config=) ppc mpc8xx nx823 684 685pcu_e_config: unconfig 686 @./mkconfig $(@:_config=) ppc mpc8xx pcu_e siemens 687 688QS850_config: unconfig 689 @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc 690 691QS823_config: unconfig 692 @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc 693 694QS860T_config: unconfig 695 @./mkconfig $(@:_config=) ppc mpc8xx qs860t snmc 696 697quantum_config: unconfig 698 @./mkconfig $(@:_config=) ppc mpc8xx quantum 699 700R360MPI_config: unconfig 701 @./mkconfig $(@:_config=) ppc mpc8xx r360mpi 702 703RBC823_config: unconfig 704 @./mkconfig $(@:_config=) ppc mpc8xx rbc823 705 706RPXClassic_config: unconfig 707 @./mkconfig $(@:_config=) ppc mpc8xx RPXClassic 708 709RPXlite_config: unconfig 710 @./mkconfig $(@:_config=) ppc mpc8xx RPXlite 711 712RPXlite_DW_64_config \ 713RPXlite_DW_LCD_config \ 714RPXlite_DW_64_LCD_config \ 715RPXlite_DW_NVRAM_config \ 716RPXlite_DW_NVRAM_64_config \ 717RPXlite_DW_NVRAM_LCD_config \ 718RPXlite_DW_NVRAM_64_LCD_config \ 719RPXlite_DW_config: unconfig 720 @ >include/config.h 721 @[ -z "$(findstring _64,$@)" ] || \ 722 { echo "#define RPXlite_64MHz" >>include/config.h ; \ 723 echo "... with 64MHz system clock ..."; \ 724 } 725 @[ -z "$(findstring _LCD,$@)" ] || \ 726 { echo "#define CONFIG_LCD" >>include/config.h ; \ 727 echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \ 728 echo "... with LCD display ..."; \ 729 } 730 @[ -z "$(findstring _NVRAM,$@)" ] || \ 731 { echo "#define CFG_ENV_IS_IN_NVRAM" >>include/config.h ; \ 732 echo "... with ENV in NVRAM ..."; \ 733 } 734 @./mkconfig -a RPXlite_DW ppc mpc8xx RPXlite_dw 735 736rmu_config: unconfig 737 @./mkconfig $(@:_config=) ppc mpc8xx rmu 738 739RRvision_config: unconfig 740 @./mkconfig $(@:_config=) ppc mpc8xx RRvision 741 742RRvision_LCD_config: unconfig 743 @echo "#define CONFIG_LCD" >include/config.h 744 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h 745 @./mkconfig -a RRvision ppc mpc8xx RRvision 746 747SM850_config : unconfig 748 @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx 749 750spc1920_config: 751 @./mkconfig $(@:_config=) ppc mpc8xx spc1920 752 753SPD823TS_config: unconfig 754 @./mkconfig $(@:_config=) ppc mpc8xx spd8xx 755 756stxxtc_config: unconfig 757 @./mkconfig $(@:_config=) ppc mpc8xx stxxtc 758 759svm_sc8xx_config: unconfig 760 @ >include/config.h 761 @./mkconfig $(@:_config=) ppc mpc8xx svm_sc8xx 762 763SXNI855T_config: unconfig 764 @./mkconfig $(@:_config=) ppc mpc8xx sixnet 765 766# EMK MPC8xx based modules 767TOP860_config: unconfig 768 @./mkconfig $(@:_config=) ppc mpc8xx top860 emk 769 770# Play some tricks for configuration selection 771# Only 855 and 860 boards may come with FEC 772# and only 823 boards may have LCD support 773xtract_8xx = $(subst _LCD,,$(subst _config,,$1)) 774 775FPS850L_config \ 776FPS860L_config \ 777NSCU_config \ 778TQM823L_config \ 779TQM823L_LCD_config \ 780TQM850L_config \ 781TQM855L_config \ 782TQM860L_config \ 783TQM862L_config \ 784TQM823M_config \ 785TQM850M_config \ 786TQM855M_config \ 787TQM860M_config \ 788TQM862M_config \ 789TQM866M_config \ 790TQM885D_config \ 791virtlab2_config: unconfig 792 @ >include/config.h 793 @[ -z "$(findstring _LCD,$@)" ] || \ 794 { echo "#define CONFIG_LCD" >>include/config.h ; \ 795 echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \ 796 echo "... with LCD display" ; \ 797 } 798 @./mkconfig -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx 799 800TTTech_config: unconfig 801 @echo "#define CONFIG_LCD" >include/config.h 802 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h 803 @./mkconfig -a TQM823L ppc mpc8xx tqm8xx 804 805uc100_config : unconfig 806 @./mkconfig $(@:_config=) ppc mpc8xx uc100 807 808v37_config: unconfig 809 @echo "#define CONFIG_LCD" >include/config.h 810 @echo "#define CONFIG_SHARP_LQ084V1DG21" >>include/config.h 811 @./mkconfig $(@:_config=) ppc mpc8xx v37 812 813wtk_config: unconfig 814 @echo "#define CONFIG_LCD" >include/config.h 815 @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>include/config.h 816 @./mkconfig -a TQM823L ppc mpc8xx tqm8xx 817 818######################################################################### 819## PPC4xx Systems 820######################################################################### 821xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1)))))) 822 823ADCIOP_config: unconfig 824 @./mkconfig $(@:_config=) ppc ppc4xx adciop esd 825 826AP1000_config:unconfig 827 @./mkconfig $(@:_config=) ppc ppc4xx ap1000 amirix 828 829APC405_config: unconfig 830 @./mkconfig $(@:_config=) ppc ppc4xx apc405 esd 831 832AR405_config: unconfig 833 @./mkconfig $(@:_config=) ppc ppc4xx ar405 esd 834 835ASH405_config: unconfig 836 @./mkconfig $(@:_config=) ppc ppc4xx ash405 esd 837 838bamboo_config: unconfig 839 @./mkconfig $(@:_config=) ppc ppc4xx bamboo amcc 840 841bubinga_config: unconfig 842 @./mkconfig $(@:_config=) ppc ppc4xx bubinga amcc 843 844CANBT_config: unconfig 845 @./mkconfig $(@:_config=) ppc ppc4xx canbt esd 846 847CATcenter_config \ 848CATcenter_25_config \ 849CATcenter_33_config: unconfig 850 @ echo "/* CATcenter uses PPChameleon Model ME */" > include/config.h 851 @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> include/config.h 852 @[ -z "$(findstring _25,$@)" ] || \ 853 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \ 854 echo "SysClk = 25MHz" ; \ 855 } 856 @[ -z "$(findstring _33,$@)" ] || \ 857 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \ 858 echo "SysClk = 33MHz" ; \ 859 } 860 @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave 861 862CPCI2DP_config: unconfig 863 @./mkconfig $(@:_config=) ppc ppc4xx cpci2dp esd 864 865CPCI405_config \ 866CPCI4052_config \ 867CPCI405DT_config \ 868CPCI405AB_config: unconfig 869 @./mkconfig $(@:_config=) ppc ppc4xx cpci405 esd 870 @echo "BOARD_REVISION = $(@:_config=)" >>include/config.mk 871 872CPCI440_config: unconfig 873 @./mkconfig $(@:_config=) ppc ppc4xx cpci440 esd 874 875CPCIISER4_config: unconfig 876 @./mkconfig $(@:_config=) ppc ppc4xx cpciiser4 esd 877 878CRAYL1_config: unconfig 879 @./mkconfig $(@:_config=) ppc ppc4xx L1 cray 880 881csb272_config: unconfig 882 @./mkconfig $(@:_config=) ppc ppc4xx csb272 883 884csb472_config: unconfig 885 @./mkconfig $(@:_config=) ppc ppc4xx csb472 886 887DASA_SIM_config: unconfig 888 @./mkconfig $(@:_config=) ppc ppc4xx dasa_sim esd 889 890DP405_config: unconfig 891 @./mkconfig $(@:_config=) ppc ppc4xx dp405 esd 892 893DU405_config: unconfig 894 @./mkconfig $(@:_config=) ppc ppc4xx du405 esd 895 896ebony_config: unconfig 897 @./mkconfig $(@:_config=) ppc ppc4xx ebony amcc 898 899ERIC_config: unconfig 900 @./mkconfig $(@:_config=) ppc ppc4xx eric 901 902EXBITGEN_config: unconfig 903 @./mkconfig $(@:_config=) ppc ppc4xx exbitgen 904 905G2000_config: unconfig 906 @./mkconfig $(@:_config=) ppc ppc4xx g2000 907 908HH405_config: unconfig 909 @./mkconfig $(@:_config=) ppc ppc4xx hh405 esd 910 911HUB405_config: unconfig 912 @./mkconfig $(@:_config=) ppc ppc4xx hub405 esd 913 914JSE_config: unconfig 915 @./mkconfig $(@:_config=) ppc ppc4xx jse 916 917KAREF_config: unconfig 918 @./mkconfig $(@:_config=) ppc ppc4xx karef sandburst 919 920luan_config: unconfig 921 @./mkconfig $(@:_config=) ppc ppc4xx luan amcc 922 923METROBOX_config: unconfig 924 @./mkconfig $(@:_config=) ppc ppc4xx metrobox sandburst 925 926MIP405_config: unconfig 927 @./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl 928 929MIP405T_config: unconfig 930 @echo "#define CONFIG_MIP405T" >include/config.h 931 @echo "Enable subset config for MIP405T" 932 @./mkconfig -a MIP405 ppc ppc4xx mip405 mpl 933 934ML2_config: unconfig 935 @./mkconfig $(@:_config=) ppc ppc4xx ml2 936 937ml300_config: unconfig 938 @./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx 939 940ocotea_config: unconfig 941 @./mkconfig $(@:_config=) ppc ppc4xx ocotea amcc 942 943OCRTC_config \ 944ORSG_config: unconfig 945 @./mkconfig $(@:_config=) ppc ppc4xx ocrtc esd 946 947p3p440_config: unconfig 948 @./mkconfig $(@:_config=) ppc ppc4xx p3p440 prodrive 949 950PCI405_config: unconfig 951 @./mkconfig $(@:_config=) ppc ppc4xx pci405 esd 952 953pcs440ep_config: unconfig 954 @./mkconfig $(@:_config=) ppc ppc4xx pcs440ep 955 956PIP405_config: unconfig 957 @./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl 958 959PLU405_config: unconfig 960 @./mkconfig $(@:_config=) ppc ppc4xx plu405 esd 961 962PMC405_config: unconfig 963 @./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd 964 965PPChameleonEVB_config \ 966PPChameleonEVB_BA_25_config \ 967PPChameleonEVB_ME_25_config \ 968PPChameleonEVB_HI_25_config \ 969PPChameleonEVB_BA_33_config \ 970PPChameleonEVB_ME_33_config \ 971PPChameleonEVB_HI_33_config: unconfig 972 @ >include/config.h 973 @[ -z "$(findstring EVB_BA,$@)" ] || \ 974 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>include/config.h ; \ 975 echo "... BASIC model" ; \ 976 } 977 @[ -z "$(findstring EVB_ME,$@)" ] || \ 978 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>include/config.h ; \ 979 echo "... MEDIUM model" ; \ 980 } 981 @[ -z "$(findstring EVB_HI,$@)" ] || \ 982 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>include/config.h ; \ 983 echo "... HIGH-END model" ; \ 984 } 985 @[ -z "$(findstring _25,$@)" ] || \ 986 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \ 987 echo "SysClk = 25MHz" ; \ 988 } 989 @[ -z "$(findstring _33,$@)" ] || \ 990 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \ 991 echo "SysClk = 33MHz" ; \ 992 } 993 @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave 994 995sbc405_config: unconfig 996 @./mkconfig $(@:_config=) ppc ppc4xx sbc405 997 998sycamore_config: unconfig 999 @echo "Configuring for sycamore board as subset of walnut..." 1000 @./mkconfig -a walnut ppc ppc4xx walnut amcc 1001 1002VOH405_config: unconfig 1003 @./mkconfig $(@:_config=) ppc ppc4xx voh405 esd 1004 1005VOM405_config: unconfig 1006 @./mkconfig $(@:_config=) ppc ppc4xx vom405 esd 1007 1008CMS700_config: unconfig 1009 @./mkconfig $(@:_config=) ppc ppc4xx cms700 esd 1010 1011W7OLMC_config \ 1012W7OLMG_config: unconfig 1013 @./mkconfig $(@:_config=) ppc ppc4xx w7o 1014 1015walnut_config: unconfig 1016 @./mkconfig $(@:_config=) ppc ppc4xx walnut amcc 1017 1018WUH405_config: unconfig 1019 @./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd 1020 1021XPEDITE1K_config: unconfig 1022 @./mkconfig $(@:_config=) ppc ppc4xx xpedite1k 1023 1024yosemite_config: unconfig 1025 @./mkconfig $(@:_config=) ppc ppc4xx yosemite amcc 1026 1027yellowstone_config: unconfig 1028 @./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc 1029 1030yucca_config: unconfig 1031 @./mkconfig $(@:_config=) ppc ppc4xx yucca amcc 1032 1033######################################################################### 1034## MPC8220 Systems 1035######################################################################### 1036 1037Alaska8220_config \ 1038Yukon8220_config: unconfig 1039 @./mkconfig $(@:_config=) ppc mpc8220 alaska 1040 1041sorcery_config: unconfig 1042 @./mkconfig $(@:_config=) ppc mpc8220 sorcery 1043 1044######################################################################### 1045## MPC824x Systems 1046######################################################################### 1047xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))) 1048 1049A3000_config: unconfig 1050 @./mkconfig $(@:_config=) ppc mpc824x a3000 1051 1052barco_config: unconfig 1053 @./mkconfig $(@:_config=) ppc mpc824x barco 1054 1055BMW_config: unconfig 1056 @./mkconfig $(@:_config=) ppc mpc824x bmw 1057 1058CPC45_config \ 1059CPC45_ROMBOOT_config: unconfig 1060 @./mkconfig $(call xtract_82xx,$@) ppc mpc824x cpc45 1061 @cd ./include ; \ 1062 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1063 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1064 echo "... booting from 8-bit flash" ; \ 1065 else \ 1066 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1067 echo "... booting from 64-bit flash" ; \ 1068 fi; \ 1069 echo "export CONFIG_BOOT_ROM" >> config.mk; 1070 1071CU824_config: unconfig 1072 @./mkconfig $(@:_config=) ppc mpc824x cu824 1073 1074debris_config: unconfig 1075 @./mkconfig $(@:_config=) ppc mpc824x debris etin 1076 1077eXalion_config: unconfig 1078 @./mkconfig $(@:_config=) ppc mpc824x eXalion 1079 1080HIDDEN_DRAGON_config: unconfig 1081 @./mkconfig $(@:_config=) ppc mpc824x hidden_dragon 1082 1083kvme080_config: unconfig 1084 @./mkconfig $(@:_config=) ppc mpc824x kvme080 etin 1085 1086MOUSSE_config: unconfig 1087 @./mkconfig $(@:_config=) ppc mpc824x mousse 1088 1089MUSENKI_config: unconfig 1090 @./mkconfig $(@:_config=) ppc mpc824x musenki 1091 1092MVBLUE_config: unconfig 1093 @./mkconfig $(@:_config=) ppc mpc824x mvblue 1094 1095OXC_config: unconfig 1096 @./mkconfig $(@:_config=) ppc mpc824x oxc 1097 1098PN62_config: unconfig 1099 @./mkconfig $(@:_config=) ppc mpc824x pn62 1100 1101Sandpoint8240_config: unconfig 1102 @./mkconfig $(@:_config=) ppc mpc824x sandpoint 1103 1104Sandpoint8245_config: unconfig 1105 @./mkconfig $(@:_config=) ppc mpc824x sandpoint 1106 1107sbc8240_config: unconfig 1108 @./mkconfig $(@:_config=) ppc mpc824x sbc8240 1109 1110SL8245_config: unconfig 1111 @./mkconfig $(@:_config=) ppc mpc824x sl8245 1112 1113utx8245_config: unconfig 1114 @./mkconfig $(@:_config=) ppc mpc824x utx8245 1115 1116######################################################################### 1117## MPC8260 Systems 1118######################################################################### 1119 1120atc_config: unconfig 1121 @./mkconfig $(@:_config=) ppc mpc8260 atc 1122 1123cogent_mpc8260_config: unconfig 1124 @./mkconfig $(@:_config=) ppc mpc8260 cogent 1125 1126CPU86_config \ 1127CPU86_ROMBOOT_config: unconfig 1128 @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu86 1129 @cd ./include ; \ 1130 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1131 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1132 echo "... booting from 8-bit flash" ; \ 1133 else \ 1134 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1135 echo "... booting from 64-bit flash" ; \ 1136 fi; \ 1137 echo "export CONFIG_BOOT_ROM" >> config.mk; 1138 1139CPU87_config \ 1140CPU87_ROMBOOT_config: unconfig 1141 @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu87 1142 @cd ./include ; \ 1143 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1144 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1145 echo "... booting from 8-bit flash" ; \ 1146 else \ 1147 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1148 echo "... booting from 64-bit flash" ; \ 1149 fi; \ 1150 echo "export CONFIG_BOOT_ROM" >> config.mk; 1151 1152ep8248_config \ 1153ep8248E_config : unconfig 1154 @./mkconfig ep8248 ppc mpc8260 ep8248 1155 1156ep8260_config: unconfig 1157 @./mkconfig $(@:_config=) ppc mpc8260 ep8260 1158 1159gw8260_config: unconfig 1160 @./mkconfig $(@:_config=) ppc mpc8260 gw8260 1161 1162hymod_config: unconfig 1163 @./mkconfig $(@:_config=) ppc mpc8260 hymod 1164 1165IDS8247_config: unconfig 1166 @./mkconfig $(@:_config=) ppc mpc8260 ids8247 1167 1168IPHASE4539_config: unconfig 1169 @./mkconfig $(@:_config=) ppc mpc8260 iphase4539 1170 1171ISPAN_config \ 1172ISPAN_REVB_config: unconfig 1173 @if [ "$(findstring _REVB_,$@)" ] ; then \ 1174 echo "#define CFG_REV_B" > include/config.h ; \ 1175 fi 1176 @./mkconfig -a ISPAN ppc mpc8260 ispan 1177 1178MPC8260ADS_config \ 1179MPC8260ADS_lowboot_config \ 1180MPC8260ADS_33MHz_config \ 1181MPC8260ADS_33MHz_lowboot_config \ 1182MPC8260ADS_40MHz_config \ 1183MPC8260ADS_40MHz_lowboot_config \ 1184MPC8272ADS_config \ 1185MPC8272ADS_lowboot_config \ 1186PQ2FADS_config \ 1187PQ2FADS_lowboot_config \ 1188PQ2FADS-VR_config \ 1189PQ2FADS-VR_lowboot_config \ 1190PQ2FADS-ZU_config \ 1191PQ2FADS-ZU_lowboot_config \ 1192PQ2FADS-ZU_66MHz_config \ 1193PQ2FADS-ZU_66MHz_lowboot_config \ 1194 : unconfig 1195 $(if $(findstring PQ2FADS,$@), \ 1196 @echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > include/config.h, \ 1197 @echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > include/config.h) 1198 $(if $(findstring MHz,$@), \ 1199 @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> include/config.h, \ 1200 $(if $(findstring VR,$@), \ 1201 @echo "#define CONFIG_8260_CLKIN 66000000" >> include/config.h)) 1202 @[ -z "$(findstring lowboot_,$@)" ] || \ 1203 { echo "TEXT_BASE = 0xFF800000" >board/mpc8260ads/config.tmp ; \ 1204 echo "... with lowboot configuration" ; \ 1205 } 1206 @./mkconfig -a MPC8260ADS ppc mpc8260 mpc8260ads 1207 1208MPC8266ADS_config: unconfig 1209 @./mkconfig $(@:_config=) ppc mpc8260 mpc8266ads 1210 1211# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash 1212PM825_config \ 1213PM825_ROMBOOT_config \ 1214PM825_BIGFLASH_config \ 1215PM825_ROMBOOT_BIGFLASH_config \ 1216PM826_config \ 1217PM826_ROMBOOT_config \ 1218PM826_BIGFLASH_config \ 1219PM826_ROMBOOT_BIGFLASH_config: unconfig 1220 @if [ "$(findstring PM825_,$@)" ] ; then \ 1221 echo "#define CONFIG_PCI" >include/config.h ; \ 1222 else \ 1223 >include/config.h ; \ 1224 fi 1225 @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1226 echo "... booting from 8-bit flash" ; \ 1227 echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \ 1228 echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \ 1229 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ 1230 echo "... with 32 MB Flash" ; \ 1231 echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \ 1232 fi; \ 1233 else \ 1234 echo "... booting from 64-bit flash" ; \ 1235 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ 1236 echo "... with 32 MB Flash" ; \ 1237 echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \ 1238 echo "TEXT_BASE = 0x40000000" >board/pm826/config.tmp ; \ 1239 else \ 1240 echo "TEXT_BASE = 0xFF000000" >board/pm826/config.tmp ; \ 1241 fi; \ 1242 fi 1243 @./mkconfig -a PM826 ppc mpc8260 pm826 1244 1245PM828_config \ 1246PM828_PCI_config \ 1247PM828_ROMBOOT_config \ 1248PM828_ROMBOOT_PCI_config: unconfig 1249 @if [ "$(findstring _PCI_,$@)" ] ; then \ 1250 echo "#define CONFIG_PCI" >>include/config.h ; \ 1251 echo "... with PCI enabled" ; \ 1252 else \ 1253 >include/config.h ; \ 1254 fi 1255 @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1256 echo "... booting from 8-bit flash" ; \ 1257 echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \ 1258 echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \ 1259 fi 1260 @./mkconfig -a PM828 ppc mpc8260 pm828 1261 1262ppmc8260_config: unconfig 1263 @./mkconfig $(@:_config=) ppc mpc8260 ppmc8260 1264 1265Rattler8248_config \ 1266Rattler_config: unconfig 1267 $(if $(findstring 8248,$@), \ 1268 @echo "#define CONFIG_MPC8248" > include/config.h) 1269 @./mkconfig -a Rattler ppc mpc8260 rattler 1270 1271RPXsuper_config: unconfig 1272 @./mkconfig $(@:_config=) ppc mpc8260 rpxsuper 1273 1274rsdproto_config: unconfig 1275 @./mkconfig $(@:_config=) ppc mpc8260 rsdproto 1276 1277sacsng_config: unconfig 1278 @./mkconfig $(@:_config=) ppc mpc8260 sacsng 1279 1280sbc8260_config: unconfig 1281 @./mkconfig $(@:_config=) ppc mpc8260 sbc8260 1282 1283SCM_config: unconfig 1284 @./mkconfig $(@:_config=) ppc mpc8260 SCM siemens 1285 1286TQM8255_AA_config \ 1287TQM8260_AA_config \ 1288TQM8260_AB_config \ 1289TQM8260_AC_config \ 1290TQM8260_AD_config \ 1291TQM8260_AE_config \ 1292TQM8260_AF_config \ 1293TQM8260_AG_config \ 1294TQM8260_AH_config \ 1295TQM8260_AI_config \ 1296TQM8265_AA_config: unconfig 1297 @case "$@" in \ 1298 TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \ 1299 TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \ 1300 TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ 1301 TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ 1302 TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1303 TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \ 1304 TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1305 TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \ 1306 TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \ 1307 TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1308 TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \ 1309 esac; \ 1310 >include/config.h ; \ 1311 if [ "$${CTYPE}" != "MPC8260" ] ; then \ 1312 echo "#define CONFIG_$${CTYPE}" >>include/config.h ; \ 1313 fi; \ 1314 echo "#define CONFIG_$${CFREQ}MHz" >>include/config.h ; \ 1315 echo "... with $${CFREQ}MHz system clock" ; \ 1316 if [ "$${CACHE}" == "yes" ] ; then \ 1317 echo "#define CONFIG_L2_CACHE" >>include/config.h ; \ 1318 echo "... with L2 Cache support" ; \ 1319 else \ 1320 echo "#undef CONFIG_L2_CACHE" >>include/config.h ; \ 1321 echo "... without L2 Cache support" ; \ 1322 fi; \ 1323 if [ "$${BMODE}" == "60x" ] ; then \ 1324 echo "#define CONFIG_BUSMODE_60x" >>include/config.h ; \ 1325 echo "... with 60x Bus Mode" ; \ 1326 else \ 1327 echo "#undef CONFIG_BUSMODE_60x" >>include/config.h ; \ 1328 echo "... without 60x Bus Mode" ; \ 1329 fi 1330 @./mkconfig -a TQM8260 ppc mpc8260 tqm8260 1331 1332VoVPN-GW_66MHz_config \ 1333VoVPN-GW_100MHz_config: unconfig 1334 @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > include/config.h 1335 @./mkconfig -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk 1336 1337ZPC1900_config: unconfig 1338 @./mkconfig $(@:_config=) ppc mpc8260 zpc1900 1339 1340######################################################################### 1341## Coldfire 1342######################################################################### 1343 1344cobra5272_config : unconfig 1345 @./mkconfig $(@:_config=) m68k mcf52x2 cobra5272 1346 1347EB+MCF-EV123_config : unconfig 1348 @ >include/config.h 1349 @echo "TEXT_BASE = 0xFFE00000"|tee board/BuS/EB+MCF-EV123/textbase.mk 1350 @./mkconfig EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS 1351 1352EB+MCF-EV123_internal_config : unconfig 1353 @ >include/config.h 1354 @echo "TEXT_BASE = 0xF0000000"|tee board/BuS/EB+MCF-EV123/textbase.mk 1355 @./mkconfig EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS 1356 1357M5271EVB_config : unconfig 1358 @./mkconfig $(@:_config=) m68k mcf52x2 m5271evb 1359 1360M5272C3_config : unconfig 1361 @./mkconfig $(@:_config=) m68k mcf52x2 m5272c3 1362 1363M5282EVB_config : unconfig 1364 @./mkconfig $(@:_config=) m68k mcf52x2 m5282evb 1365 1366TASREG_config : unconfig 1367 @./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd 1368 1369r5200_config : unconfig 1370 @./mkconfig $(@:_config=) m68k mcf52x2 r5200 1371 1372######################################################################### 1373## MPC83xx Systems 1374######################################################################### 1375 1376MPC8349ADS_config: unconfig 1377 @./mkconfig $(@:_config=) ppc mpc83xx mpc8349ads 1378 1379TQM834x_config: unconfig 1380 @./mkconfig $(@:_config=) ppc mpc83xx tqm834x 1381 1382MPC8349EMDS_config: unconfig 1383 @./mkconfig $(@:_config=) ppc mpc83xx mpc8349emds 1384 1385######################################################################### 1386## MPC85xx Systems 1387######################################################################### 1388 1389MPC8540ADS_config: unconfig 1390 @./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads 1391 1392MPC8540EVAL_config \ 1393MPC8540EVAL_33_config \ 1394MPC8540EVAL_66_config \ 1395MPC8540EVAL_33_slave_config \ 1396MPC8540EVAL_66_slave_config: unconfig 1397 @echo "" >include/config.h ; \ 1398 if [ "$(findstring _33_,$@)" ] ; then \ 1399 echo -n "... 33 MHz PCI" ; \ 1400 else \ 1401 echo "#define CONFIG_SYSCLK_66M" >>include/config.h ; \ 1402 echo -n "... 66 MHz PCI" ; \ 1403 fi ; \ 1404 if [ "$(findstring _slave_,$@)" ] ; then \ 1405 echo "#define CONFIG_PCI_SLAVE" >>include/config.h ; \ 1406 echo " slave" ; \ 1407 else \ 1408 echo " host" ; \ 1409 fi 1410 @./mkconfig -a MPC8540EVAL ppc mpc85xx mpc8540eval 1411 1412MPC8560ADS_config: unconfig 1413 @./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads 1414 1415MPC8541CDS_config: unconfig 1416 @./mkconfig $(@:_config=) ppc mpc85xx mpc8541cds cds 1417 1418MPC8548CDS_config: unconfig 1419 @./mkconfig $(@:_config=) ppc mpc85xx mpc8548cds cds 1420 1421MPC8555CDS_config: unconfig 1422 @./mkconfig $(@:_config=) ppc mpc85xx mpc8555cds cds 1423 1424PM854_config: unconfig 1425 @./mkconfig $(@:_config=) ppc mpc85xx pm854 1426 1427PM856_config: unconfig 1428 @./mkconfig $(@:_config=) ppc mpc85xx pm856 1429 1430sbc8540_config \ 1431sbc8540_33_config \ 1432sbc8540_66_config: unconfig 1433 @if [ "$(findstring _66_,$@)" ] ; then \ 1434 echo "#define CONFIG_PCI_66" >>include/config.h ; \ 1435 echo "... 66 MHz PCI" ; \ 1436 else \ 1437 >include/config.h ; \ 1438 echo "... 33 MHz PCI" ; \ 1439 fi 1440 @./mkconfig -a SBC8540 ppc mpc85xx sbc8560 1441 1442sbc8560_config \ 1443sbc8560_33_config \ 1444sbc8560_66_config: unconfig 1445 @if [ "$(findstring _66_,$@)" ] ; then \ 1446 echo "#define CONFIG_PCI_66" >>include/config.h ; \ 1447 echo "... 66 MHz PCI" ; \ 1448 else \ 1449 >include/config.h ; \ 1450 echo "... 33 MHz PCI" ; \ 1451 fi 1452 @./mkconfig -a sbc8560 ppc mpc85xx sbc8560 1453 1454stxgp3_config: unconfig 1455 @./mkconfig $(@:_config=) ppc mpc85xx stxgp3 1456 1457TQM8540_config \ 1458TQM8541_config \ 1459TQM8555_config \ 1460TQM8560_config: unconfig 1461 @CTYPE=$(subst TQM,,$(@:_config=)); \ 1462 >include/config.h ; \ 1463 echo "... TQM"$${CTYPE}; \ 1464 echo "#define CONFIG_MPC$${CTYPE}">>include/config.h; \ 1465 echo "#define CONFIG_TQM$${CTYPE}">>include/config.h; \ 1466 echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>include/config.h; \ 1467 echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>include/config.h; \ 1468 echo "#define CFG_BOOTFILE \"bootfile=/tftpboot/tqm$${CTYPE}/uImage\0\"">>include/config.h 1469 @./mkconfig -a TQM85xx ppc mpc85xx tqm85xx 1470 1471######################################################################### 1472## 74xx/7xx Systems 1473######################################################################### 1474 1475AmigaOneG3SE_config: unconfig 1476 @./mkconfig $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI 1477 1478BAB7xx_config: unconfig 1479 @./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec 1480 1481CPCI750_config: unconfig 1482 @./mkconfig CPCI750 ppc 74xx_7xx cpci750 esd 1483 1484DB64360_config: unconfig 1485 @./mkconfig DB64360 ppc 74xx_7xx db64360 Marvell 1486 1487DB64460_config: unconfig 1488 @./mkconfig DB64460 ppc 74xx_7xx db64460 Marvell 1489 1490ELPPC_config: unconfig 1491 @./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec 1492 1493EVB64260_config \ 1494EVB64260_750CX_config: unconfig 1495 @./mkconfig EVB64260 ppc 74xx_7xx evb64260 1496 1497P3G4_config: unconfig 1498 @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260 1499 1500PCIPPC2_config \ 1501PCIPPC6_config: unconfig 1502 @./mkconfig $(@:_config=) ppc 74xx_7xx pcippc2 1503 1504ZUMA_config: unconfig 1505 @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260 1506 1507ppmc7xx_config: unconfig 1508 @./mkconfig $(@:_config=) ppc 74xx_7xx ppmc7xx 1509 1510#======================================================================== 1511# ARM 1512#======================================================================== 1513######################################################################### 1514## StrongARM Systems 1515######################################################################### 1516 1517assabet_config : unconfig 1518 @./mkconfig $(@:_config=) arm sa1100 assabet 1519 1520dnp1110_config : unconfig 1521 @./mkconfig $(@:_config=) arm sa1100 dnp1110 1522 1523gcplus_config : unconfig 1524 @./mkconfig $(@:_config=) arm sa1100 gcplus 1525 1526lart_config : unconfig 1527 @./mkconfig $(@:_config=) arm sa1100 lart 1528 1529shannon_config : unconfig 1530 @./mkconfig $(@:_config=) arm sa1100 shannon 1531 1532######################################################################### 1533## ARM92xT Systems 1534######################################################################### 1535 1536xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1)))) 1537 1538xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) 1539 1540xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) 1541 1542at91rm9200dk_config : unconfig 1543 @./mkconfig $(@:_config=) arm arm920t at91rm9200dk NULL at91rm9200 1544 1545cmc_pu2_config : unconfig 1546 @./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 1547 1548csb637_config : unconfig 1549 @./mkconfig $(@:_config=) arm arm920t csb637 NULL at91rm9200 1550 1551mp2usb_config : unconfig 1552 @./mkconfig $(@:_config=) arm arm920t mp2usb NULL at91rm9200 1553 1554 1555######################################################################## 1556## ARM Integrator boards - see doc/README-integrator for more info. 1557integratorap_config \ 1558ap_config \ 1559ap966_config \ 1560ap922_config \ 1561ap922_XA10_config \ 1562ap7_config \ 1563ap720t_config \ 1564ap920t_config \ 1565ap926ejs_config \ 1566ap946es_config: unconfig 1567 @board/integratorap/split_by_variant.sh $@ 1568 1569integratorcp_config \ 1570cp_config \ 1571cp920t_config \ 1572cp926ejs_config \ 1573cp946es_config \ 1574cp1136_config \ 1575cp966_config \ 1576cp922_config \ 1577cp922_XA10_config \ 1578cp1026_config: unconfig 1579 @board/integratorcp/split_by_variant.sh $@ 1580 1581kb9202_config : unconfig 1582 @./mkconfig $(@:_config=) arm arm920t kb9202 NULL at91rm9200 1583 1584lpd7a400_config \ 1585lpd7a404_config: unconfig 1586 @./mkconfig $(@:_config=) arm lh7a40x lpd7a40x 1587 1588mx1ads_config : unconfig 1589 @./mkconfig $(@:_config=) arm arm920t mx1ads NULL imx 1590 1591mx1fs2_config : unconfig 1592 @./mkconfig $(@:_config=) arm arm920t mx1fs2 NULL imx 1593 1594netstar_32_config \ 1595netstar_config: unconfig 1596 @if [ "$(findstring _32_,$@)" ] ; then \ 1597 echo "... 32MB SDRAM" ; \ 1598 echo "#define PHYS_SDRAM_1_SIZE SZ_32M" >>include/config.h ; \ 1599 else \ 1600 echo "... 64MB SDRAM" ; \ 1601 echo "#define PHYS_SDRAM_1_SIZE SZ_64M" >>include/config.h ; \ 1602 fi 1603 @./mkconfig -a netstar arm arm925t netstar 1604 1605omap1510inn_config : unconfig 1606 @./mkconfig $(@:_config=) arm arm925t omap1510inn 1607 1608omap5912osk_config : unconfig 1609 @./mkconfig $(@:_config=) arm arm926ejs omap5912osk NULL omap 1610 1611omap1610inn_config \ 1612omap1610inn_cs0boot_config \ 1613omap1610inn_cs3boot_config \ 1614omap1610inn_cs_autoboot_config \ 1615omap1610h2_config \ 1616omap1610h2_cs0boot_config \ 1617omap1610h2_cs3boot_config \ 1618omap1610h2_cs_autoboot_config: unconfig 1619 @if [ "$(findstring _cs0boot_, $@)" ] ; then \ 1620 echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \ 1621 echo "... configured for CS0 boot"; \ 1622 elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ 1623 echo "#define CONFIG_CS_AUTOBOOT" >> ./include/config.h ; \ 1624 echo "... configured for CS_AUTO boot"; \ 1625 else \ 1626 echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \ 1627 echo "... configured for CS3 boot"; \ 1628 fi; 1629 @./mkconfig -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap 1630 1631omap730p2_config \ 1632omap730p2_cs0boot_config \ 1633omap730p2_cs3boot_config : unconfig 1634 @if [ "$(findstring _cs0boot_, $@)" ] ; then \ 1635 echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \ 1636 echo "... configured for CS0 boot"; \ 1637 else \ 1638 echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \ 1639 echo "... configured for CS3 boot"; \ 1640 fi; 1641 @./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap 1642 1643sbc2410x_config: unconfig 1644 @./mkconfig $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 1645 1646scb9328_config : unconfig 1647 @./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx 1648 1649smdk2400_config : unconfig 1650 @./mkconfig $(@:_config=) arm arm920t smdk2400 NULL s3c24x0 1651 1652smdk2410_config : unconfig 1653 @./mkconfig $(@:_config=) arm arm920t smdk2410 NULL s3c24x0 1654 1655SX1_config : unconfig 1656 @./mkconfig $(@:_config=) arm arm925t sx1 1657 1658# TRAB default configuration: 8 MB Flash, 32 MB RAM 1659trab_config \ 1660trab_bigram_config \ 1661trab_bigflash_config \ 1662trab_old_config: unconfig 1663 @ >include/config.h 1664 @[ -z "$(findstring _bigram,$@)" ] || \ 1665 { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \ 1666 echo "#define CONFIG_RAM_32MB" >>include/config.h ; \ 1667 echo "... with 8 MB Flash, 32 MB RAM" ; \ 1668 } 1669 @[ -z "$(findstring _bigflash,$@)" ] || \ 1670 { echo "#define CONFIG_FLASH_16MB" >>include/config.h ; \ 1671 echo "#define CONFIG_RAM_16MB" >>include/config.h ; \ 1672 echo "... with 16 MB Flash, 16 MB RAM" ; \ 1673 echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \ 1674 } 1675 @[ -z "$(findstring _old,$@)" ] || \ 1676 { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \ 1677 echo "#define CONFIG_RAM_16MB" >>include/config.h ; \ 1678 echo "... with 8 MB Flash, 16 MB RAM" ; \ 1679 echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \ 1680 } 1681 @./mkconfig -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 1682 1683VCMA9_config : unconfig 1684 @./mkconfig $(@:_config=) arm arm920t vcma9 mpl s3c24x0 1685 1686#======================================================================== 1687# ARM supplied Versatile development boards 1688#======================================================================== 1689versatile_config \ 1690versatileab_config \ 1691versatilepb_config : unconfig 1692 @board/versatile/split_by_variant.sh $@ 1693 1694voiceblue_smallflash_config \ 1695voiceblue_config: unconfig 1696 @if [ "$(findstring _smallflash_,$@)" ] ; then \ 1697 echo "... boot from lower flash bank" ; \ 1698 echo "#define VOICEBLUE_SMALL_FLASH" >>include/config.h ; \ 1699 echo "VOICEBLUE_SMALL_FLASH=y" >board/voiceblue/config.tmp ; \ 1700 else \ 1701 echo "... boot from upper flash bank" ; \ 1702 >include/config.h ; \ 1703 echo "VOICEBLUE_SMALL_FLASH=n" >board/voiceblue/config.tmp ; \ 1704 fi 1705 @./mkconfig -a voiceblue arm arm925t voiceblue 1706 1707cm4008_config : unconfig 1708 @./mkconfig $(@:_config=) arm arm920t cm4008 NULL ks8695 1709 1710cm41xx_config : unconfig 1711 @./mkconfig $(@:_config=) arm arm920t cm41xx NULL ks8695 1712 1713gth2_config : unconfig 1714 @ >include/config.h 1715 @echo "#define CONFIG_GTH2 1" >>include/config.h 1716 @./mkconfig -a gth2 mips mips gth2 1717 1718######################################################################### 1719## S3C44B0 Systems 1720######################################################################### 1721 1722B2_config : unconfig 1723 @./mkconfig $(@:_config=) arm s3c44b0 B2 dave 1724 1725######################################################################### 1726## ARM720T Systems 1727######################################################################### 1728 1729armadillo_config: unconfig 1730 @./mkconfig $(@:_config=) arm arm720t armadillo 1731 1732ep7312_config : unconfig 1733 @./mkconfig $(@:_config=) arm arm720t ep7312 1734 1735impa7_config : unconfig 1736 @./mkconfig $(@:_config=) arm arm720t impa7 1737 1738modnet50_config : unconfig 1739 @./mkconfig $(@:_config=) arm arm720t modnet50 1740 1741evb4510_config : unconfig 1742 @./mkconfig $(@:_config=) arm arm720t evb4510 1743 1744######################################################################### 1745## XScale Systems 1746######################################################################### 1747 1748adsvix_config : unconfig 1749 @./mkconfig $(@:_config=) arm pxa adsvix 1750 1751cerf250_config : unconfig 1752 @./mkconfig $(@:_config=) arm pxa cerf250 1753 1754cradle_config : unconfig 1755 @./mkconfig $(@:_config=) arm pxa cradle 1756 1757csb226_config : unconfig 1758 @./mkconfig $(@:_config=) arm pxa csb226 1759 1760delta_config : 1761 @./mkconfig $(@:_config=) arm pxa delta 1762 1763innokom_config : unconfig 1764 @./mkconfig $(@:_config=) arm pxa innokom 1765 1766ixdp425_config : unconfig 1767 @./mkconfig $(@:_config=) arm ixp ixdp425 1768 1769ixdpg425_config : unconfig 1770 @./mkconfig $(@:_config=) arm ixp ixdp425 1771 1772lubbock_config : unconfig 1773 @./mkconfig $(@:_config=) arm pxa lubbock 1774 1775pleb2_config : unconfig 1776 @./mkconfig $(@:_config=) arm pxa pleb2 1777 1778logodl_config : unconfig 1779 @./mkconfig $(@:_config=) arm pxa logodl 1780 1781pdnb3_config : unconfig 1782 @./mkconfig $(@:_config=) arm ixp pdnb3 prodrive 1783 1784pxa255_idp_config: unconfig 1785 @./mkconfig $(@:_config=) arm pxa pxa255_idp 1786 1787wepep250_config : unconfig 1788 @./mkconfig $(@:_config=) arm pxa wepep250 1789 1790xaeniax_config : unconfig 1791 @./mkconfig $(@:_config=) arm pxa xaeniax 1792 1793xm250_config : unconfig 1794 @./mkconfig $(@:_config=) arm pxa xm250 1795 1796xsengine_config : unconfig 1797 @./mkconfig $(@:_config=) arm pxa xsengine 1798 1799zylonite_config : 1800 @./mkconfig $(@:_config=) arm pxa zylonite 1801 1802######################################################################### 1803## ARM1136 Systems 1804######################################################################### 1805omap2420h4_config : unconfig 1806 @./mkconfig $(@:_config=) arm arm1136 omap2420h4 1807 1808#======================================================================== 1809# i386 1810#======================================================================== 1811######################################################################### 1812## AMD SC520 CDP 1813######################################################################### 1814sc520_cdp_config : unconfig 1815 @./mkconfig $(@:_config=) i386 i386 sc520_cdp 1816 1817sc520_spunk_config : unconfig 1818 @./mkconfig $(@:_config=) i386 i386 sc520_spunk 1819 1820sc520_spunk_rel_config : unconfig 1821 @./mkconfig $(@:_config=) i386 i386 sc520_spunk 1822 1823#======================================================================== 1824# MIPS 1825#======================================================================== 1826######################################################################### 1827## MIPS32 4Kc 1828######################################################################### 1829 1830xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1)))) 1831 1832incaip_100MHz_config \ 1833incaip_133MHz_config \ 1834incaip_150MHz_config \ 1835incaip_config: unconfig 1836 @ >include/config.h 1837 @[ -z "$(findstring _100MHz,$@)" ] || \ 1838 { echo "#define CPU_CLOCK_RATE 100000000" >>include/config.h ; \ 1839 echo "... with 100MHz system clock" ; \ 1840 } 1841 @[ -z "$(findstring _133MHz,$@)" ] || \ 1842 { echo "#define CPU_CLOCK_RATE 133000000" >>include/config.h ; \ 1843 echo "... with 133MHz system clock" ; \ 1844 } 1845 @[ -z "$(findstring _150MHz,$@)" ] || \ 1846 { echo "#define CPU_CLOCK_RATE 150000000" >>include/config.h ; \ 1847 echo "... with 150MHz system clock" ; \ 1848 } 1849 @./mkconfig -a $(call xtract_incaip,$@) mips mips incaip 1850 1851tb0229_config: unconfig 1852 @./mkconfig $(@:_config=) mips mips tb0229 1853 1854######################################################################### 1855## MIPS32 AU1X00 1856######################################################################### 1857dbau1000_config : unconfig 1858 @ >include/config.h 1859 @echo "#define CONFIG_DBAU1000 1" >>include/config.h 1860 @./mkconfig -a dbau1x00 mips mips dbau1x00 1861 1862dbau1100_config : unconfig 1863 @ >include/config.h 1864 @echo "#define CONFIG_DBAU1100 1" >>include/config.h 1865 @./mkconfig -a dbau1x00 mips mips dbau1x00 1866 1867dbau1500_config : unconfig 1868 @ >include/config.h 1869 @echo "#define CONFIG_DBAU1500 1" >>include/config.h 1870 @./mkconfig -a dbau1x00 mips mips dbau1x00 1871 1872dbau1550_config : unconfig 1873 @ >include/config.h 1874 @echo "#define CONFIG_DBAU1550 1" >>include/config.h 1875 @./mkconfig -a dbau1x00 mips mips dbau1x00 1876 1877dbau1550_el_config : unconfig 1878 @ >include/config.h 1879 @echo "#define CONFIG_DBAU1550 1" >>include/config.h 1880 @./mkconfig -a dbau1x00 mips mips dbau1x00 1881 1882pb1000_config : unconfig 1883 @ >include/config.h 1884 @echo "#define CONFIG_PB1000 1" >>include/config.h 1885 @./mkconfig -a pb1x00 mips mips pb1x00 1886 1887######################################################################### 1888## MIPS64 5Kc 1889######################################################################### 1890 1891purple_config : unconfig 1892 @./mkconfig $(@:_config=) mips mips purple 1893 1894#======================================================================== 1895# Nios 1896#======================================================================== 1897######################################################################### 1898## Nios32 1899######################################################################### 1900 1901DK1C20_safe_32_config \ 1902DK1C20_standard_32_config \ 1903DK1C20_config: unconfig 1904 @ >include/config.h 1905 @[ -z "$(findstring _safe_32,$@)" ] || \ 1906 { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \ 1907 echo "... NIOS 'safe_32' configuration" ; \ 1908 } 1909 @[ -z "$(findstring _standard_32,$@)" ] || \ 1910 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ 1911 echo "... NIOS 'standard_32' configuration" ; \ 1912 } 1913 @[ -z "$(findstring DK1C20_config,$@)" ] || \ 1914 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ 1915 echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \ 1916 } 1917 @./mkconfig -a DK1C20 nios nios dk1c20 altera 1918 1919DK1S10_safe_32_config \ 1920DK1S10_standard_32_config \ 1921DK1S10_mtx_ldk_20_config \ 1922DK1S10_config: unconfig 1923 @ >include/config.h 1924 @[ -z "$(findstring _safe_32,$@)" ] || \ 1925 { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \ 1926 echo "... NIOS 'safe_32' configuration" ; \ 1927 } 1928 @[ -z "$(findstring _standard_32,$@)" ] || \ 1929 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ 1930 echo "... NIOS 'standard_32' configuration" ; \ 1931 } 1932 @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \ 1933 { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>include/config.h ; \ 1934 echo "... NIOS 'mtx_ldk_20' configuration" ; \ 1935 } 1936 @[ -z "$(findstring DK1S10_config,$@)" ] || \ 1937 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ 1938 echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \ 1939 } 1940 @./mkconfig -a DK1S10 nios nios dk1s10 altera 1941 1942ADNPESC1_DNPEVA2_base_32_config \ 1943ADNPESC1_base_32_config \ 1944ADNPESC1_config: unconfig 1945 @ >include/config.h 1946 @[ -z "$(findstring _DNPEVA2,$@)" ] || \ 1947 { echo "#define CONFIG_DNPEVA2 1" >>include/config.h ; \ 1948 echo "... DNP/EVA2 configuration" ; \ 1949 } 1950 @[ -z "$(findstring _base_32,$@)" ] || \ 1951 { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \ 1952 echo "... NIOS 'base_32' configuration" ; \ 1953 } 1954 @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ 1955 { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \ 1956 echo "... NIOS 'base_32' configuration (DEFAULT)" ; \ 1957 } 1958 @./mkconfig -a ADNPESC1 nios nios adnpesc1 ssv 1959 1960######################################################################### 1961## Nios-II 1962######################################################################### 1963 1964EP1C20_config : unconfig 1965 @./mkconfig EP1C20 nios2 nios2 ep1c20 altera 1966 1967EP1S10_config : unconfig 1968 @./mkconfig EP1S10 nios2 nios2 ep1s10 altera 1969 1970EP1S40_config : unconfig 1971 @./mkconfig EP1S40 nios2 nios2 ep1s40 altera 1972 1973PK1C20_config : unconfig 1974 @./mkconfig PK1C20 nios2 nios2 pk1c20 psyent 1975 1976PCI5441_config : unconfig 1977 @./mkconfig PCI5441 nios2 nios2 pci5441 psyent 1978 1979#======================================================================== 1980# MicroBlaze 1981#======================================================================== 1982######################################################################### 1983## Microblaze 1984######################################################################### 1985suzaku_config: unconfig 1986 @ >include/config.h 1987 @echo "#define CONFIG_SUZAKU 1" >> include/config.h 1988 @./mkconfig -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno 1989 1990######################################################################### 1991## Blackfin 1992######################################################################### 1993ezkit533_config : unconfig 1994 @./mkconfig $(@:_config=) blackfin bf533 ezkit533 1995 1996stamp_config : unconfig 1997 @./mkconfig $(@:_config=) blackfin bf533 stamp 1998 1999dspstamp_config : unconfig 2000 @./mkconfig $(@:_config=) blackfin bf533 dsp_stamp 2001 2002######################################################################### 2003######################################################################### 2004######################################################################### 2005 2006clean: 2007 find . -type f \ 2008 \( -name 'core' -o -name '*.bak' -o -name '*~' \ 2009 -o -name '*.o' -o -name '*.a' \) -print \ 2010 | xargs rm -f 2011 rm -f examples/hello_world examples/timer \ 2012 examples/eepro100_eeprom examples/sched \ 2013 examples/mem_to_mem_idma2intr examples/82559_eeprom \ 2014 examples/smc91111_eeprom \ 2015 examples/test_burst 2016 rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr 2017 rm -f tools/mpc86x_clk tools/ncb 2018 rm -f tools/easylogo/easylogo tools/bmp_logo 2019 rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend 2020 rm -f tools/env/fw_printenv tools/env/fw_setenv 2021 rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image 2022 rm -f board/netstar/eeprom board/netstar/crcek 2023 rm -f board/netstar/*.srec board/netstar/*.bin 2024 rm -f board/trab/trab_fkt board/voiceblue/eeprom 2025 rm -f board/integratorap/u-boot.lds board/integratorcp/u-boot.lds 2026 rm -f include/bmp_logo.h 2027 2028clobber: clean 2029 find . -type f \( -name .depend \ 2030 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \ 2031 -print0 \ 2032 | xargs -0 rm -f 2033 rm -f $(OBJS) *.bak tags TAGS include/version_autogenerated.h 2034 rm -fr *.*~ 2035 rm -f u-boot u-boot.map u-boot.hex $(ALL) 2036 rm -f tools/crc32.c tools/environment.c tools/env/crc32.c 2037 rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c 2038 rm -f include/asm/proc include/asm/arch include/asm 2039 2040mrproper \ 2041distclean: clobber unconfig 2042 2043backup: 2044 F=`basename $(TOPDIR)` ; cd .. ; \ 2045 gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F 2046 2047######################################################################### 2048