1# 2# (C) Copyright 2000-2009 3# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4# 5# See file CREDITS for list of people who contributed to this 6# project. 7# 8# This program is free software; you can redistribute it and/or 9# modify it under the terms of the GNU General Public License as 10# published by the Free Software Foundatio; either version 2 of 11# the License, or (at your option) any later version. 12# 13# This program is distributed in the hope that it will be useful, 14# but WITHOUT ANY WARRANTY; without even the implied warranty of 15# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16# GNU General Public License for more details. 17# 18# You should have received a copy of the GNU General Public License 19# along with this program; if not, write to the Free Software 20# Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21# MA 02111-1307 USA 22# 23 24VERSION = 2009 25PATCHLEVEL = 06 26SUBLEVEL = 27EXTRAVERSION = 28ifneq "$(SUBLEVEL)" "" 29U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) 30else 31U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION) 32endif 33TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h 34VERSION_FILE = $(obj)include/version_autogenerated.h 35 36HOSTARCH := $(shell uname -m | \ 37 sed -e s/i.86/i386/ \ 38 -e s/sun4u/sparc64/ \ 39 -e s/arm.*/arm/ \ 40 -e s/sa110/arm/ \ 41 -e s/powerpc/ppc/ \ 42 -e s/ppc64/ppc/ \ 43 -e s/macppc/ppc/) 44 45HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ 46 sed -e 's/\(cygwin\).*/cygwin/') 47 48# Set shell to bash if possible, otherwise fall back to sh 49SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ 50 else if [ -x /bin/bash ]; then echo /bin/bash; \ 51 else echo sh; fi; fi) 52 53export HOSTARCH HOSTOS SHELL 54 55# Deal with colliding definitions from tcsh etc. 56VENDOR= 57 58######################################################################### 59# Allow for silent builds 60ifeq (,$(findstring s,$(MAKEFLAGS))) 61XECHO = echo 62else 63XECHO = : 64endif 65 66######################################################################### 67# 68# U-boot build supports producing a object files to the separate external 69# directory. Two use cases are supported: 70# 71# 1) Add O= to the make command line 72# 'make O=/tmp/build all' 73# 74# 2) Set environement variable BUILD_DIR to point to the desired location 75# 'export BUILD_DIR=/tmp/build' 76# 'make' 77# 78# The second approach can also be used with a MAKEALL script 79# 'export BUILD_DIR=/tmp/build' 80# './MAKEALL' 81# 82# Command line 'O=' setting overrides BUILD_DIR environent variable. 83# 84# When none of the above methods is used the local build is performed and 85# the object files are placed in the source directory. 86# 87 88ifdef O 89ifeq ("$(origin O)", "command line") 90BUILD_DIR := $(O) 91endif 92endif 93 94ifneq ($(BUILD_DIR),) 95saved-output := $(BUILD_DIR) 96 97# Attempt to create a output directory. 98$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR}) 99 100# Verify if it was successful. 101BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd) 102$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist)) 103endif # ifneq ($(BUILD_DIR),) 104 105OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR)) 106SRCTREE := $(CURDIR) 107TOPDIR := $(SRCTREE) 108LNDIR := $(OBJTREE) 109export TOPDIR SRCTREE OBJTREE 110 111MKCONFIG := $(SRCTREE)/mkconfig 112export MKCONFIG 113 114ifneq ($(OBJTREE),$(SRCTREE)) 115REMOTE_BUILD := 1 116export REMOTE_BUILD 117endif 118 119# $(obj) and (src) are defined in config.mk but here in main Makefile 120# we also need them before config.mk is included which is the case for 121# some targets like unconfig, clean, clobber, distclean, etc. 122ifneq ($(OBJTREE),$(SRCTREE)) 123obj := $(OBJTREE)/ 124src := $(SRCTREE)/ 125else 126obj := 127src := 128endif 129export obj src 130 131# Make sure CDPATH settings don't interfere 132unexport CDPATH 133 134######################################################################### 135 136ifeq ($(ARCH),powerpc) 137ARCH = ppc 138endif 139 140# The "tools" are needed early, so put this first 141# Don't include stuff already done in $(LIBS) 142SUBDIRS = tools \ 143 examples/standalone \ 144 examples/api 145 146.PHONY : $(SUBDIRS) 147 148ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk)) 149 150# Include autoconf.mk before config.mk so that the config options are available 151# to all top level build files. We need the dummy all: target to prevent the 152# dependency target in autoconf.mk.dep from being the default. 153all: 154sinclude $(obj)include/autoconf.mk.dep 155sinclude $(obj)include/autoconf.mk 156 157# load ARCH, BOARD, and CPU configuration 158include $(obj)include/config.mk 159export ARCH CPU BOARD VENDOR SOC 160 161# set default to nothing for native builds 162ifeq ($(HOSTARCH),$(ARCH)) 163CROSS_COMPILE ?= 164endif 165 166# load other configuration 167include $(TOPDIR)/config.mk 168 169######################################################################### 170# U-Boot objects....order is important (i.e. start must be first) 171 172OBJS = cpu/$(CPU)/start.o 173ifeq ($(CPU),i386) 174OBJS += cpu/$(CPU)/start16.o 175OBJS += cpu/$(CPU)/resetvec.o 176endif 177ifeq ($(CPU),ppc4xx) 178OBJS += cpu/$(CPU)/resetvec.o 179endif 180ifeq ($(CPU),mpc85xx) 181OBJS += cpu/$(CPU)/resetvec.o 182endif 183 184OBJS := $(addprefix $(obj),$(OBJS)) 185 186LIBS = lib_generic/libgeneric.a 187LIBS += lib_generic/lzma/liblzma.a 188LIBS += lib_generic/lzo/liblzo.a 189LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \ 190 "board/$(VENDOR)/common/lib$(VENDOR).a"; fi) 191LIBS += cpu/$(CPU)/lib$(CPU).a 192ifdef SOC 193LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a 194endif 195ifeq ($(CPU),ixp) 196LIBS += cpu/ixp/npe/libnpe.a 197endif 198LIBS += lib_$(ARCH)/lib$(ARCH).a 199LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \ 200 fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \ 201 fs/ubifs/libubifs.a 202LIBS += net/libnet.a 203LIBS += disk/libdisk.a 204LIBS += drivers/bios_emulator/libatibiosemu.a 205LIBS += drivers/block/libblock.a 206LIBS += drivers/dma/libdma.a 207LIBS += drivers/fpga/libfpga.a 208LIBS += drivers/gpio/libgpio.a 209LIBS += drivers/hwmon/libhwmon.a 210LIBS += drivers/i2c/libi2c.a 211LIBS += drivers/input/libinput.a 212LIBS += drivers/misc/libmisc.a 213LIBS += drivers/mmc/libmmc.a 214LIBS += drivers/mtd/libmtd.a 215LIBS += drivers/mtd/nand/libnand.a 216LIBS += drivers/mtd/onenand/libonenand.a 217LIBS += drivers/mtd/ubi/libubi.a 218LIBS += drivers/mtd/spi/libspi_flash.a 219LIBS += drivers/net/libnet.a 220LIBS += drivers/net/phy/libphy.a 221LIBS += drivers/net/sk98lin/libsk98lin.a 222LIBS += drivers/pci/libpci.a 223LIBS += drivers/pcmcia/libpcmcia.a 224LIBS += drivers/spi/libspi.a 225ifeq ($(CPU),mpc83xx) 226LIBS += drivers/qe/qe.a 227endif 228ifeq ($(CPU),mpc85xx) 229LIBS += drivers/qe/qe.a 230LIBS += cpu/mpc8xxx/ddr/libddr.a 231TAG_SUBDIRS += cpu/mpc8xxx 232endif 233ifeq ($(CPU),mpc86xx) 234LIBS += cpu/mpc8xxx/ddr/libddr.a 235TAG_SUBDIRS += cpu/mpc8xxx 236endif 237LIBS += drivers/rtc/librtc.a 238LIBS += drivers/serial/libserial.a 239LIBS += drivers/twserial/libtws.a 240LIBS += drivers/usb/gadget/libusb_gadget.a 241LIBS += drivers/usb/host/libusb_host.a 242LIBS += drivers/usb/musb/libusb_musb.a 243LIBS += drivers/video/libvideo.a 244LIBS += drivers/watchdog/libwatchdog.a 245LIBS += common/libcommon.a 246LIBS += libfdt/libfdt.a 247LIBS += api/libapi.a 248LIBS += post/libpost.a 249 250LIBS := $(addprefix $(obj),$(LIBS)) 251.PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE) 252 253LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a 254LIBBOARD := $(addprefix $(obj),$(LIBBOARD)) 255 256# Add GCC lib 257PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc 258 259ifeq ($(CONFIG_NAND_U_BOOT),y) 260NAND_SPL = nand_spl 261U_BOOT_NAND = $(obj)u-boot-nand.bin 262endif 263 264ifeq ($(CONFIG_ONENAND_U_BOOT),y) 265ONENAND_IPL = onenand_ipl 266U_BOOT_ONENAND = $(obj)u-boot-onenand.bin 267endif 268 269__OBJS := $(subst $(obj),,$(OBJS)) 270__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD)) 271 272######################################################################### 273######################################################################### 274 275# Always append ALL so that arch config.mk's can add custom ones 276ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND) 277 278all: $(ALL) 279 280$(obj)u-boot.hex: $(obj)u-boot 281 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ 282 283$(obj)u-boot.srec: $(obj)u-boot 284 $(OBJCOPY) -O srec $< $@ 285 286$(obj)u-boot.bin: $(obj)u-boot 287 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ 288 289$(obj)u-boot.ldr: $(obj)u-boot 290 $(obj)tools/envcrc --binary > $(obj)env-ldr.o 291 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS) 292 293$(obj)u-boot.ldr.hex: $(obj)u-boot.ldr 294 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary 295 296$(obj)u-boot.ldr.srec: $(obj)u-boot.ldr 297 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary 298 299$(obj)u-boot.img: $(obj)u-boot.bin 300 ./tools/mkimage -A $(ARCH) -T firmware -C none \ 301 -a $(TEXT_BASE) -e 0 \ 302 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ 303 sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ 304 -d $< $@ 305 306$(obj)u-boot.sha1: $(obj)u-boot.bin 307 $(obj)tools/ubsha1 $(obj)u-boot.bin 308 309$(obj)u-boot.dis: $(obj)u-boot 310 $(OBJDUMP) -d $< > $@ 311 312GEN_UBOOT = \ 313 UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ 314 sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ 315 cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ 316 --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ 317 -Map u-boot.map -o u-boot 318$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) 319 $(GEN_UBOOT) 320ifeq ($(CONFIG_KALLSYMS),y) 321 smap=`$(call SYSTEM_MAP,u-boot) | awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ 322 $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" -c common/system_map.c -o $(obj)common/system_map.o 323 $(GEN_UBOOT) $(obj)common/system_map.o 324endif 325 326$(OBJS): depend 327 $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@)) 328 329$(LIBS): depend $(SUBDIRS) 330 $(MAKE) -C $(dir $(subst $(obj),,$@)) 331 332$(LIBBOARD): depend $(LIBS) 333 $(MAKE) -C $(dir $(subst $(obj),,$@)) 334 335$(SUBDIRS): depend 336 $(MAKE) -C $@ all 337 338$(LDSCRIPT): depend 339 $(MAKE) -C $(dir $@) $(notdir $@) 340 341$(NAND_SPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk 342 $(MAKE) -C nand_spl/board/$(BOARDDIR) all 343 344$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin 345 cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin 346 347$(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk 348 $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all 349 350$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin 351 cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin 352 cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin 353 354$(VERSION_FILE): 355 @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \ 356 '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp 357 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@ 358 359$(TIMESTAMP_FILE): 360 @date +'#define U_BOOT_DATE "%b %d %C%y"' > $@ 361 @date +'#define U_BOOT_TIME "%T"' >> $@ 362 363gdbtools: 364 $(MAKE) -C tools/gdb all || exit 1 365 366updater: 367 $(MAKE) -C tools/updater all || exit 1 368 369env: 370 $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1 371 372depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk 373 for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done 374 375TAG_SUBDIRS += include 376TAG_SUBDIRS += lib_generic board/$(BOARDDIR) 377TAG_SUBDIRS += cpu/$(CPU) 378TAG_SUBDIRS += lib_$(ARCH) 379TAG_SUBDIRS += fs/cramfs 380TAG_SUBDIRS += fs/fat 381TAG_SUBDIRS += fs/fdos 382TAG_SUBDIRS += fs/jffs2 383TAG_SUBDIRS += fs/yaffs2 384TAG_SUBDIRS += net 385TAG_SUBDIRS += disk 386TAG_SUBDIRS += common 387TAG_SUBDIRS += drivers/bios_emulator 388TAG_SUBDIRS += drivers/block 389TAG_SUBDIRS += drivers/gpio 390TAG_SUBDIRS += drivers/hwmon 391TAG_SUBDIRS += drivers/i2c 392TAG_SUBDIRS += drivers/input 393TAG_SUBDIRS += drivers/misc 394TAG_SUBDIRS += drivers/mmc 395TAG_SUBDIRS += drivers/mtd 396TAG_SUBDIRS += drivers/mtd/nand 397TAG_SUBDIRS += drivers/mtd/onenand 398TAG_SUBDIRS += drivers/mtd/spi 399TAG_SUBDIRS += drivers/net 400TAG_SUBDIRS += drivers/net/sk98lin 401TAG_SUBDIRS += drivers/pci 402TAG_SUBDIRS += drivers/pcmcia 403TAG_SUBDIRS += drivers/qe 404TAG_SUBDIRS += drivers/rtc 405TAG_SUBDIRS += drivers/serial 406TAG_SUBDIRS += drivers/spi 407TAG_SUBDIRS += drivers/usb 408TAG_SUBDIRS += drivers/video 409 410tags ctags: 411 ctags -w -o $(obj)ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \ 412 -name '*.[ch]' -print` 413 414etags: 415 etags -a -o $(obj)etags `find $(SUBDIRS) $(TAG_SUBDIRS) \ 416 -name '*.[ch]' -print` 417cscope: 418 find $(SUBDIRS) $(TAG_SUBDIRS) -name '*.[ch]' -print \ 419 > cscope.files 420 cscope -b -q -k 421 422SYSTEM_MAP = \ 423 $(NM) $1 | \ 424 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ 425 LC_ALL=C sort 426$(obj)System.map: $(obj)u-boot 427 @$(call SYSTEM_MAP,$<) > $(obj)System.map 428 429# 430# Auto-generate the autoconf.mk file (which is included by all makefiles) 431# 432# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep. 433# the dep file is only include in this top level makefile to determine when 434# to regenerate the autoconf.mk file. 435$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h 436 @$(XECHO) Generating $@ ; \ 437 set -e ; \ 438 : Generate the dependancies ; \ 439 $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \ 440 -MQ $(obj)include/autoconf.mk include/common.h > $@ 441 442$(obj)include/autoconf.mk: $(obj)include/config.h 443 @$(XECHO) Generating $@ ; \ 444 set -e ; \ 445 : Extract the config macros ; \ 446 $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ 447 sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ 448 mv $@.tmp $@ 449 450######################################################################### 451else # !config.mk 452all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \ 453$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \ 454$(SUBDIRS) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools updater env depend \ 455dep tags ctags etags cscope $(obj)System.map: 456 @echo "System not configured - see README" >&2 457 @ exit 1 458endif # config.mk 459 460.PHONY : CHANGELOG 461CHANGELOG: 462 git log --no-merges U-Boot-1_1_5.. | \ 463 unexpand -a | sed -e 's/\s\s*$$//' > $@ 464 465include/license.h: tools/bin2header COPYING 466 cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h 467######################################################################### 468 469unconfig: 470 @rm -f $(obj)include/config.h $(obj)include/config.mk \ 471 $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \ 472 $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep 473 474#======================================================================== 475# PowerPC 476#======================================================================== 477 478######################################################################### 479## MPC5xx Systems 480######################################################################### 481 482canmb_config: unconfig 483 @$(MKCONFIG) -a canmb ppc mpc5xxx canmb 484 485cmi_mpc5xx_config: unconfig 486 @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi 487 488PATI_config: unconfig 489 @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl 490 491######################################################################### 492## MPC5xxx Systems 493######################################################################### 494 495aev_config: unconfig 496 @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc 497 498BC3450_config: unconfig 499 @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450 500 501cm5200_config: unconfig 502 @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200 503 504cpci5200_config: unconfig 505 @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd 506 507digsy_mtc_config \ 508digsy_mtc_LOWBOOT_config \ 509digsy_mtc_RAMBOOT_config: unconfig 510 @mkdir -p $(obj)include 511 @mkdir -p $(obj)board/digsy_mtc 512 @ >$(obj)include/config.h 513 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 514 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \ 515 echo "... with LOWBOOT configuration" ; \ 516 } 517 @[ -z "$(findstring RAMBOOT_,$@)" ] || \ 518 { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \ 519 echo "... with RAMBOOT configuration" ; \ 520 } 521 @$(MKCONFIG) -a digsy_mtc ppc mpc5xxx digsy_mtc 522 523hmi1001_config: unconfig 524 @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001 525 526Lite5200_config \ 527Lite5200_LOWBOOT_config \ 528Lite5200_LOWBOOT08_config \ 529icecube_5200_config \ 530icecube_5200_LOWBOOT_config \ 531icecube_5200_LOWBOOT08_config \ 532icecube_5200_DDR_config \ 533icecube_5200_DDR_LOWBOOT_config \ 534icecube_5200_DDR_LOWBOOT08_config \ 535icecube_5100_config: unconfig 536 @mkdir -p $(obj)include 537 @mkdir -p $(obj)board/icecube 538 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 539 { if [ "$(findstring DDR,$@)" ] ; \ 540 then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ 541 else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ 542 fi ; \ 543 $(XECHO) "... with LOWBOOT configuration" ; \ 544 } 545 @[ -z "$(findstring LOWBOOT08,$@)" ] || \ 546 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ 547 echo "... with 8 MB flash only" ; \ 548 $(XECHO) "... with LOWBOOT configuration" ; \ 549 } 550 @[ -z "$(findstring DDR,$@)" ] || \ 551 { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ 552 $(XECHO) "... DDR memory revision" ; \ 553 } 554 @[ -z "$(findstring 5200,$@)" ] || \ 555 { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ 556 $(XECHO) "... with MPC5200 processor" ; \ 557 } 558 @[ -z "$(findstring 5100,$@)" ] || \ 559 { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ 560 $(XECHO) "... with MGT5100 processor" ; \ 561 } 562 @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube 563 564jupiter_config: unconfig 565 @$(MKCONFIG) jupiter ppc mpc5xxx jupiter 566 567inka4x0_config: unconfig 568 @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 569 570lite5200b_config \ 571lite5200b_PM_config \ 572lite5200b_LOWBOOT_config: unconfig 573 @mkdir -p $(obj)include 574 @mkdir -p $(obj)board/icecube 575 @ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h 576 @ $(XECHO) "... DDR memory revision" 577 @ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h 578 @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h 579 @[ -z "$(findstring _PM_,$@)" ] || \ 580 { echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \ 581 $(XECHO) "... with power management (low-power mode) support" ; \ 582 } 583 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 584 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ 585 $(XECHO) "... with LOWBOOT configuration" ; \ 586 } 587 @ $(XECHO) "... with MPC5200B processor" 588 @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube 589 590mcc200_config \ 591mcc200_SDRAM_config \ 592mcc200_highboot_config \ 593mcc200_COM12_config \ 594mcc200_COM12_SDRAM_config \ 595mcc200_COM12_highboot_config \ 596mcc200_COM12_highboot_SDRAM_config \ 597mcc200_highboot_SDRAM_config \ 598prs200_config \ 599prs200_DDR_config \ 600prs200_highboot_config \ 601prs200_highboot_DDR_config: unconfig 602 @mkdir -p $(obj)include 603 @mkdir -p $(obj)board/mcc200 604 @[ -n "$(findstring highboot,$@)" ] || \ 605 { $(XECHO) "... with lowboot configuration" ; \ 606 } 607 @[ -z "$(findstring highboot,$@)" ] || \ 608 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \ 609 $(XECHO) "... with highboot configuration" ; \ 610 } 611 @[ -n "$(findstring _SDRAM,$@)" ] || \ 612 { if [ -n "$(findstring mcc200,$@)" ]; \ 613 then \ 614 $(XECHO) "... with DDR" ; \ 615 else \ 616 if [ -n "$(findstring _DDR,$@)" ];\ 617 then \ 618 $(XECHO) "... with DDR" ; \ 619 else \ 620 echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\ 621 $(XECHO) "... with SDRAM" ; \ 622 fi; \ 623 fi; \ 624 } 625 @[ -z "$(findstring _SDRAM,$@)" ] || \ 626 { echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \ 627 $(XECHO) "... with SDRAM" ; \ 628 } 629 @[ -z "$(findstring COM12,$@)" ] || \ 630 { echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \ 631 $(XECHO) "... with console on COM12" ; \ 632 } 633 @[ -z "$(findstring prs200,$@)" ] || \ 634 { echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\ 635 } 636 @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200 637 638mecp5200_config: unconfig 639 @$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esd 640 641motionpro_config: unconfig 642 @$(MKCONFIG) motionpro ppc mpc5xxx motionpro 643 644mucmc52_config: unconfig 645 @$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52 646 647munices_config: unconfig 648 @$(MKCONFIG) munices ppc mpc5xxx munices 649 650MVBC_P_config: unconfig 651 @mkdir -p $(obj)include 652 @mkdir -p $(obj)board/mvbc_p 653 @ >$(obj)include/config.h 654 @[ -z "$(findstring MVBC_P,$@)" ] || \ 655 { echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; } 656 @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision 657 658o2dnt_config: unconfig 659 @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt 660 661pcm030_config \ 662pcm030_LOWBOOT_config: unconfig 663 @mkdir -p $(obj)include $(obj)board/phytec/pcm030 664 @ >$(obj)include/config.h 665 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 666 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \ 667 echo "... with LOWBOOT configuration" ; \ 668 } 669 @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec 670 671pf5200_config: unconfig 672 @$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd 673 674PM520_config \ 675PM520_DDR_config \ 676PM520_ROMBOOT_config \ 677PM520_ROMBOOT_DDR_config: unconfig 678 @mkdir -p $(obj)include 679 @[ -z "$(findstring DDR,$@)" ] || \ 680 { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ 681 $(XECHO) "... DDR memory revision" ; \ 682 } 683 @[ -z "$(findstring ROMBOOT,$@)" ] || \ 684 { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 685 $(XECHO) "... booting from 8-bit flash" ; \ 686 } 687 @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520 688 689smmaco4_config: unconfig 690 @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc 691 692spieval_config: unconfig 693 @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc 694 695TB5200_B_config \ 696TB5200_config: unconfig 697 @mkdir -p $(obj)include 698 @[ -z "$(findstring _B,$@)" ] || \ 699 { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 700 $(XECHO) "... with MPC5200B processor" ; \ 701 } 702 @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc 703 704MINI5200_config \ 705EVAL5200_config \ 706TOP5200_config: unconfig 707 @mkdir -p $(obj)include 708 @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 709 @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk 710 711Total5100_config \ 712Total5200_config \ 713Total5200_lowboot_config \ 714Total5200_Rev2_config \ 715Total5200_Rev2_lowboot_config: unconfig 716 @mkdir -p $(obj)include 717 @mkdir -p $(obj)board/total5200 718 @[ -z "$(findstring 5100,$@)" ] || \ 719 { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ 720 $(XECHO) "... with MGT5100 processor" ; \ 721 } 722 @[ -z "$(findstring 5200,$@)" ] || \ 723 { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ 724 $(XECHO) "... with MPC5200 processor" ; \ 725 } 726 @[ -n "$(findstring Rev,$@)" ] || \ 727 { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \ 728 $(XECHO) "... revision 1 board" ; \ 729 } 730 @[ -z "$(findstring Rev2_,$@)" ] || \ 731 { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \ 732 $(XECHO) "... revision 2 board" ; \ 733 } 734 @[ -z "$(findstring lowboot_,$@)" ] || \ 735 { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \ 736 $(XECHO) "... with lowboot configuration" ; \ 737 } 738 @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200 739 740cam5200_config \ 741cam5200_niosflash_config \ 742fo300_config \ 743MiniFAP_config \ 744TQM5200S_config \ 745TQM5200S_HIGHBOOT_config \ 746TQM5200_B_config \ 747TQM5200_B_HIGHBOOT_config \ 748TQM5200_config \ 749TQM5200_STK100_config: unconfig 750 @mkdir -p $(obj)include 751 @mkdir -p $(obj)board/tqc/tqm5200 752 @[ -z "$(findstring cam5200,$@)" ] || \ 753 { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \ 754 echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ 755 echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 756 $(XECHO) "... TQM5200S on Cam5200" ; \ 757 } 758 @[ -z "$(findstring niosflash,$@)" ] || \ 759 { echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \ 760 $(XECHO) "... with NIOS flash driver" ; \ 761 } 762 @[ -z "$(findstring fo300,$@)" ] || \ 763 { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \ 764 $(XECHO) "... TQM5200 on FO300" ; \ 765 } 766 @[ -z "$(findstring MiniFAP,$@)" ] || \ 767 { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \ 768 $(XECHO) "... TQM5200_AC on MiniFAP" ; \ 769 } 770 @[ -z "$(findstring STK100,$@)" ] || \ 771 { echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \ 772 $(XECHO) "... on a STK52XX.100 base board" ; \ 773 } 774 @[ -z "$(findstring TQM5200_B,$@)" ] || \ 775 { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 776 } 777 @[ -z "$(findstring TQM5200S,$@)" ] || \ 778 { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ 779 echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 780 } 781 @[ -z "$(findstring HIGHBOOT,$@)" ] || \ 782 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ 783 } 784 @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc 785 786uc101_config: unconfig 787 @$(MKCONFIG) uc101 ppc mpc5xxx uc101 788 789v38b_config: unconfig 790 @$(MKCONFIG) -a v38b ppc mpc5xxx v38b 791 792######################################################################### 793## MPC512x Systems 794######################################################################### 795 796aria_config: unconfig 797 @$(MKCONFIG) -a aria ppc mpc512x aria davedenx 798 799mecp5123_config: unconfig 800 @$(MKCONFIG) -a mecp5123 ppc mpc512x mecp5123 esd 801 802mpc5121ads_config \ 803mpc5121ads_rev2_config \ 804 : unconfig 805 @mkdir -p $(obj)include 806 @if [ "$(findstring rev2,$@)" ] ; then \ 807 echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \ 808 fi 809 @$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale 810 811######################################################################### 812## MPC8xx Systems 813######################################################################### 814 815Adder_config \ 816Adder87x_config \ 817AdderII_config \ 818 : unconfig 819 @mkdir -p $(obj)include 820 $(if $(findstring AdderII,$@), \ 821 @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) 822 @$(MKCONFIG) -a Adder ppc mpc8xx adder 823 824AdderUSB_config: unconfig 825 @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder 826 827ADS860_config \ 828FADS823_config \ 829FADS850SAR_config \ 830MPC86xADS_config \ 831MPC885ADS_config \ 832FADS860T_config: unconfig 833 @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads 834 835AMX860_config : unconfig 836 @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel 837 838c2mon_config: unconfig 839 @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon 840 841CCM_config: unconfig 842 @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens 843 844cogent_mpc8xx_config: unconfig 845 @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent 846 847ELPT860_config: unconfig 848 @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX 849 850EP88x_config: unconfig 851 @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x 852 853ESTEEM192E_config: unconfig 854 @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e 855 856ETX094_config : unconfig 857 @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094 858 859FLAGADM_config: unconfig 860 @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm 861 862xtract_GEN860T = $(subst _SC,,$(subst _config,,$1)) 863 864GEN860T_SC_config \ 865GEN860T_config: unconfig 866 @mkdir -p $(obj)include 867 @[ -z "$(findstring _SC,$@)" ] || \ 868 { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \ 869 $(XECHO) "With reduced H/W feature set (SC)..." ; \ 870 } 871 @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t 872 873GENIETV_config: unconfig 874 @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv 875 876GTH_config: unconfig 877 @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth 878 879hermes_config : unconfig 880 @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes 881 882HMI10_config : unconfig 883 @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc 884 885IAD210_config: unconfig 886 @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens 887 888xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) 889 890ICU862_100MHz_config \ 891ICU862_config: unconfig 892 @mkdir -p $(obj)include 893 @[ -z "$(findstring _100MHz,$@)" ] || \ 894 { echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \ 895 $(XECHO) "... with 100MHz system clock" ; \ 896 } 897 @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862 898 899IP860_config : unconfig 900 @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860 901 902IVML24_256_config \ 903IVML24_128_config \ 904IVML24_config: unconfig 905 @mkdir -p $(obj)include 906 @[ -z "$(findstring IVML24_config,$@)" ] || \ 907 { echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \ 908 } 909 @[ -z "$(findstring IVML24_128_config,$@)" ] || \ 910 { echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \ 911 } 912 @[ -z "$(findstring IVML24_256_config,$@)" ] || \ 913 { echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \ 914 } 915 @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm 916 917IVMS8_256_config \ 918IVMS8_128_config \ 919IVMS8_config: unconfig 920 @mkdir -p $(obj)include 921 @[ -z "$(findstring IVMS8_config,$@)" ] || \ 922 { echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \ 923 } 924 @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ 925 { echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \ 926 } 927 @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ 928 { echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \ 929 } 930 @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm 931 932kmsupx4_config: unconfig 933 @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile 934 935KUP4K_config : unconfig 936 @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup 937 938KUP4X_config : unconfig 939 @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup 940 941LANTEC_config : unconfig 942 @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec 943 944lwmon_config: unconfig 945 @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon 946 947MBX_config \ 948MBX860T_config: unconfig 949 @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx 950 951mgsuvd_config: unconfig 952 @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile 953 954MHPC_config: unconfig 955 @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec 956 957xtract_NETVIA = $(subst _V2,,$(subst _config,,$1)) 958 959NETVIA_V2_config \ 960NETVIA_config: unconfig 961 @mkdir -p $(obj)include 962 @[ -z "$(findstring NETVIA_config,$@)" ] || \ 963 { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \ 964 $(XECHO) "... Version 1" ; \ 965 } 966 @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ 967 { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \ 968 $(XECHO) "... Version 2" ; \ 969 } 970 @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia 971 972xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1)) 973 974NETPHONE_V2_config \ 975NETPHONE_config: unconfig 976 @mkdir -p $(obj)include 977 @[ -z "$(findstring NETPHONE_config,$@)" ] || \ 978 { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \ 979 } 980 @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ 981 { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \ 982 } 983 @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone 984 985xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1)))) 986 987NETTA_ISDN_6412_SWAPHOOK_config \ 988NETTA_ISDN_SWAPHOOK_config \ 989NETTA_6412_SWAPHOOK_config \ 990NETTA_SWAPHOOK_config \ 991NETTA_ISDN_6412_config \ 992NETTA_ISDN_config \ 993NETTA_6412_config \ 994NETTA_config: unconfig 995 @mkdir -p $(obj)include 996 @[ -z "$(findstring ISDN_,$@)" ] || \ 997 { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \ 998 } 999 @[ -n "$(findstring ISDN_,$@)" ] || \ 1000 { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \ 1001 } 1002 @[ -z "$(findstring 6412_,$@)" ] || \ 1003 { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \ 1004 } 1005 @[ -n "$(findstring 6412_,$@)" ] || \ 1006 { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \ 1007 } 1008 @[ -z "$(findstring SWAPHOOK_,$@)" ] || \ 1009 { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \ 1010 } 1011 @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ 1012 { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \ 1013 } 1014 @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta 1015 1016xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1)) 1017 1018NETTA2_V2_config \ 1019NETTA2_config: unconfig 1020 @mkdir -p $(obj)include 1021 @[ -z "$(findstring NETTA2_config,$@)" ] || \ 1022 { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \ 1023 } 1024 @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ 1025 { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \ 1026 } 1027 @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2 1028 1029NC650_Rev1_config \ 1030NC650_Rev2_config \ 1031CP850_config: unconfig 1032 @mkdir -p $(obj)include 1033 @[ -z "$(findstring CP850,$@)" ] || \ 1034 { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \ 1035 echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ 1036 } 1037 @[ -z "$(findstring Rev1,$@)" ] || \ 1038 { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \ 1039 } 1040 @[ -z "$(findstring Rev2,$@)" ] || \ 1041 { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ 1042 } 1043 @$(MKCONFIG) -a NC650 ppc mpc8xx nc650 1044 1045NX823_config: unconfig 1046 @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823 1047 1048pcu_e_config: unconfig 1049 @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens 1050 1051QS850_config: unconfig 1052 @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc 1053 1054QS823_config: unconfig 1055 @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc 1056 1057QS860T_config: unconfig 1058 @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc 1059 1060quantum_config: unconfig 1061 @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum 1062 1063R360MPI_config: unconfig 1064 @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi 1065 1066RBC823_config: unconfig 1067 @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823 1068 1069RPXClassic_config: unconfig 1070 @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic 1071 1072RPXlite_config: unconfig 1073 @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite 1074 1075RPXlite_DW_64_config \ 1076RPXlite_DW_LCD_config \ 1077RPXlite_DW_64_LCD_config \ 1078RPXlite_DW_NVRAM_config \ 1079RPXlite_DW_NVRAM_64_config \ 1080RPXlite_DW_NVRAM_LCD_config \ 1081RPXlite_DW_NVRAM_64_LCD_config \ 1082RPXlite_DW_config: unconfig 1083 @mkdir -p $(obj)include 1084 @[ -z "$(findstring _64,$@)" ] || \ 1085 { echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \ 1086 $(XECHO) "... with 64MHz system clock ..."; \ 1087 } 1088 @[ -z "$(findstring _LCD,$@)" ] || \ 1089 { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ 1090 echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ 1091 $(XECHO) "... with LCD display ..."; \ 1092 } 1093 @[ -z "$(findstring _NVRAM,$@)" ] || \ 1094 { echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ 1095 $(XECHO) "... with ENV in NVRAM ..."; \ 1096 } 1097 @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw 1098 1099rmu_config: unconfig 1100 @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu 1101 1102RRvision_config: unconfig 1103 @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision 1104 1105RRvision_LCD_config: unconfig 1106 @mkdir -p $(obj)include 1107 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1108 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h 1109 @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision 1110 1111SM850_config : unconfig 1112 @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc 1113 1114spc1920_config: unconfig 1115 @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920 1116 1117SPD823TS_config: unconfig 1118 @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx 1119 1120stxxtc_config: unconfig 1121 @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc 1122 1123svm_sc8xx_config: unconfig 1124 @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx 1125 1126SXNI855T_config: unconfig 1127 @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet 1128 1129# EMK MPC8xx based modules 1130TOP860_config: unconfig 1131 @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk 1132 1133# Play some tricks for configuration selection 1134# Only 855 and 860 boards may come with FEC 1135# and only 823 boards may have LCD support 1136xtract_8xx = $(subst _LCD,,$(subst _config,,$1)) 1137 1138FPS850L_config \ 1139FPS860L_config \ 1140NSCU_config \ 1141TQM823L_config \ 1142TQM823L_LCD_config \ 1143TQM850L_config \ 1144TQM855L_config \ 1145TQM860L_config \ 1146TQM862L_config \ 1147TQM823M_config \ 1148TQM850M_config \ 1149TQM855M_config \ 1150TQM860M_config \ 1151TQM862M_config \ 1152TQM866M_config \ 1153TQM885D_config \ 1154TK885D_config \ 1155virtlab2_config: unconfig 1156 @mkdir -p $(obj)include 1157 @[ -z "$(findstring _LCD,$@)" ] || \ 1158 { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ 1159 echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ 1160 $(XECHO) "... with LCD display" ; \ 1161 } 1162 @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc 1163 1164TTTech_config: unconfig 1165 @mkdir -p $(obj)include 1166 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1167 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h 1168 @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc 1169 1170uc100_config : unconfig 1171 @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100 1172 1173v37_config: unconfig 1174 @mkdir -p $(obj)include 1175 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1176 @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h 1177 @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37 1178 1179wtk_config: unconfig 1180 @mkdir -p $(obj)include 1181 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1182 @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h 1183 @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc 1184 1185######################################################################### 1186## PPC4xx Systems 1187######################################################################### 1188xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1)))))) 1189 1190acadia_config: unconfig 1191 @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc 1192 1193acadia_nand_config: unconfig 1194 @mkdir -p $(obj)include $(obj)board/amcc/acadia 1195 @mkdir -p $(obj)nand_spl/board/amcc/acadia 1196 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1197 @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc 1198 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp 1199 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1200 1201ADCIOP_config: unconfig 1202 @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd 1203 1204alpr_config: unconfig 1205 @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive 1206 1207AP1000_config:unconfig 1208 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix 1209 1210APC405_config: unconfig 1211 @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd 1212 1213AR405_config: unconfig 1214 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd 1215 1216ASH405_config: unconfig 1217 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd 1218 1219bamboo_config: unconfig 1220 @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc 1221 1222bamboo_nand_config: unconfig 1223 @mkdir -p $(obj)include $(obj)board/amcc/bamboo 1224 @mkdir -p $(obj)nand_spl/board/amcc/bamboo 1225 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1226 @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc 1227 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp 1228 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1229 1230bubinga_config: unconfig 1231 @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc 1232 1233CANBT_config: unconfig 1234 @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd 1235 1236# Arches, Canyonlands & Glacier use different U-Boot images 1237arches_config \ 1238canyonlands_config \ 1239glacier_config: unconfig 1240 @mkdir -p $(obj)include 1241 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1242 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1243 @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc 1244 1245canyonlands_nand_config \ 1246glacier_nand_config: unconfig 1247 @mkdir -p $(obj)include $(obj)board/amcc/canyonlands 1248 @mkdir -p $(obj)nand_spl/board/amcc/canyonlands 1249 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1250 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \ 1251 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h 1252 @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc 1253 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp 1254 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1255 1256CATcenter_config \ 1257CATcenter_25_config \ 1258CATcenter_33_config: unconfig 1259 @mkdir -p $(obj)include 1260 @ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h 1261 @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h 1262 @[ -z "$(findstring _25,$@)" ] || \ 1263 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \ 1264 $(XECHO) "SysClk = 25MHz" ; \ 1265 } 1266 @[ -z "$(findstring _33,$@)" ] || \ 1267 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \ 1268 $(XECHO) "SysClk = 33MHz" ; \ 1269 } 1270 @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave 1271 1272CMS700_config: unconfig 1273 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd 1274 1275CPCI2DP_config: unconfig 1276 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd 1277 1278CPCI405_config \ 1279CPCI4052_config \ 1280CPCI405DT_config \ 1281CPCI405AB_config: unconfig 1282 @mkdir -p $(obj)board/esd/cpci405 1283 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd 1284 1285CPCIISER4_config: unconfig 1286 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd 1287 1288CRAYL1_config: unconfig 1289 @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray 1290 1291csb272_config: unconfig 1292 @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272 1293 1294csb472_config: unconfig 1295 @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472 1296 1297DASA_SIM_config: unconfig 1298 @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd 1299 1300DP405_config: unconfig 1301 @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd 1302 1303DU405_config: unconfig 1304 @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd 1305 1306DU440_config: unconfig 1307 @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd 1308 1309ebony_config: unconfig 1310 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc 1311 1312ERIC_config: unconfig 1313 @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric 1314 1315EXBITGEN_config: unconfig 1316 @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen 1317 1318fx12mm_flash_config: unconfig 1319 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1320 @mkdir -p $(obj)include $(obj)board/avnet/fx12mm 1321 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ 1322 > $(obj)board/avnet/fx12mm/config.tmp 1323 @echo "TEXT_BASE := 0xFFCB0000" \ 1324 >> $(obj)board/avnet/fx12mm/config.tmp 1325 @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet 1326 1327fx12mm_config: unconfig 1328 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1329 @mkdir -p $(obj)include $(obj)board/avnet/fx12mm 1330 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ 1331 > $(obj)board/avnet/fx12mm/config.tmp 1332 @echo "TEXT_BASE := 0x03000000" \ 1333 >> $(obj)board/avnet/fx12mm/config.tmp 1334 @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet 1335 1336G2000_config: unconfig 1337 @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000 1338 1339gdppc440etx_config: unconfig 1340 @$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys 1341 1342hcu4_config: unconfig 1343 @mkdir -p $(obj)board/netstal/common 1344 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal 1345 1346hcu5_config: unconfig 1347 @mkdir -p $(obj)board/netstal/common 1348 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal 1349 1350HH405_config: unconfig 1351 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd 1352 1353HUB405_config: unconfig 1354 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd 1355 1356JSE_config: unconfig 1357 @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse 1358 1359KAREF_config: unconfig 1360 @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst 1361 1362katmai_config: unconfig 1363 @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc 1364 1365# Kilauea & Haleakala images are identical (recognized via PVR) 1366kilauea_config \ 1367haleakala_config: unconfig 1368 @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc 1369 1370kilauea_nand_config \ 1371haleakala_nand_config: unconfig 1372 @mkdir -p $(obj)include $(obj)board/amcc/kilauea 1373 @mkdir -p $(obj)nand_spl/board/amcc/kilauea 1374 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1375 @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc 1376 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp 1377 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1378 1379korat_config: unconfig 1380 @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat 1381 1382luan_config: unconfig 1383 @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc 1384 1385lwmon5_config: unconfig 1386 @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5 1387 1388makalu_config: unconfig 1389 @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc 1390 1391mcu25_config: unconfig 1392 @mkdir -p $(obj)board/netstal/common 1393 @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal 1394 1395METROBOX_config: unconfig 1396 @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst 1397 1398MIP405_config: unconfig 1399 @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl 1400 1401MIP405T_config: unconfig 1402 @mkdir -p $(obj)include 1403 @echo "#define CONFIG_MIP405T" >$(obj)include/config.h 1404 @$(XECHO) "Enable subset config for MIP405T" 1405 @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl 1406 1407ML2_config: unconfig 1408 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2 1409 1410ml300_config: unconfig 1411 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx 1412 1413ml507_flash_config: unconfig 1414 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1415 @mkdir -p $(obj)include $(obj)board/xilinx/ml507 1416 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1417 > $(obj)board/xilinx/ml507/config.tmp 1418 @echo "TEXT_BASE := 0xFE360000" \ 1419 >> $(obj)board/xilinx/ml507/config.tmp 1420 @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx 1421 1422ml507_config: unconfig 1423 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1424 @mkdir -p $(obj)include $(obj)board/xilinx/ml507 1425 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1426 > $(obj)board/xilinx/ml507/config.tmp 1427 @echo "TEXT_BASE := 0x04000000" \ 1428 >> $(obj)board/xilinx/ml507/config.tmp 1429 @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx 1430 1431neo_config: unconfig 1432 @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys 1433 1434ocotea_config: unconfig 1435 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc 1436 1437OCRTC_config \ 1438ORSG_config: unconfig 1439 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd 1440 1441p3p440_config: unconfig 1442 @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive 1443 1444PCI405_config: unconfig 1445 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd 1446 1447pcs440ep_config: unconfig 1448 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep 1449 1450PIP405_config: unconfig 1451 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl 1452 1453PLU405_config: unconfig 1454 @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd 1455 1456PMC405_config: unconfig 1457 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd 1458 1459PMC440_config: unconfig 1460 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd 1461 1462PPChameleonEVB_config \ 1463PPChameleonEVB_BA_25_config \ 1464PPChameleonEVB_ME_25_config \ 1465PPChameleonEVB_HI_25_config \ 1466PPChameleonEVB_BA_33_config \ 1467PPChameleonEVB_ME_33_config \ 1468PPChameleonEVB_HI_33_config: unconfig 1469 @mkdir -p $(obj)include 1470 @[ -z "$(findstring EVB_BA,$@)" ] || \ 1471 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \ 1472 $(XECHO) "... BASIC model" ; \ 1473 } 1474 @[ -z "$(findstring EVB_ME,$@)" ] || \ 1475 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \ 1476 $(XECHO) "... MEDIUM model" ; \ 1477 } 1478 @[ -z "$(findstring EVB_HI,$@)" ] || \ 1479 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \ 1480 $(XECHO) "... HIGH-END model" ; \ 1481 } 1482 @[ -z "$(findstring _25,$@)" ] || \ 1483 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \ 1484 $(XECHO) "SysClk = 25MHz" ; \ 1485 } 1486 @[ -z "$(findstring _33,$@)" ] || \ 1487 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \ 1488 $(XECHO) "SysClk = 33MHz" ; \ 1489 } 1490 @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave 1491 1492quad100hd_config: unconfig 1493 @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd 1494 1495redwood_config: unconfig 1496 @$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc 1497 1498sbc405_config: unconfig 1499 @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405 1500 1501sc3_config:unconfig 1502 @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3 1503 1504sequoia_config \ 1505rainier_config: unconfig 1506 @mkdir -p $(obj)include 1507 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1508 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1509 @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc 1510 1511sequoia_nand_config \ 1512rainier_nand_config: unconfig 1513 @mkdir -p $(obj)include $(obj)board/amcc/sequoia 1514 @mkdir -p $(obj)nand_spl/board/amcc/sequoia 1515 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1516 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1517 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h 1518 @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc 1519 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp 1520 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1521 1522sequoia_ramboot_config \ 1523rainier_ramboot_config: unconfig 1524 @mkdir -p $(obj)include $(obj)board/amcc/sequoia 1525 @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h 1526 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1527 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h 1528 @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc 1529 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp 1530 @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \ 1531 $(obj)board/amcc/sequoia/config.tmp 1532 1533taihu_config: unconfig 1534 @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc 1535 1536taishan_config: unconfig 1537 @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc 1538 1539v5fx30teval_config: unconfig 1540 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1541 @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval 1542 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1543 > $(obj)board/avnet/v5fx30teval/config.tmp 1544 @echo "TEXT_BASE := 0x03000000" \ 1545 >> $(obj)board/avnet/v5fx30teval/config.tmp 1546 @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet 1547 1548v5fx30teval_flash_config: unconfig 1549 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1550 @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval 1551 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1552 > $(obj)board/avnet/v5fx30teval/config.tmp 1553 @echo "TEXT_BASE := 0xFF1C0000" \ 1554 >> $(obj)board/avnet/v5fx30teval/config.tmp 1555 @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet 1556 1557VOH405_config: unconfig 1558 @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd 1559 1560VOM405_config: unconfig 1561 @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd 1562 1563W7OLMC_config \ 1564W7OLMG_config: unconfig 1565 @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o 1566 1567# Walnut & Sycamore images are identical (recognized via PVR) 1568walnut_config \ 1569sycamore_config: unconfig 1570 @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc 1571 1572WUH405_config: unconfig 1573 @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd 1574 1575xilinx-ppc405-generic_flash_config: unconfig 1576 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1577 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ 1578 > $(obj)board/xilinx/ppc405-generic/config.tmp 1579 @echo "TEXT_BASE := 0xFE360000" \ 1580 >> $(obj)board/xilinx/ppc405-generic/config.tmp 1581 @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx 1582 1583xilinx-ppc405-generic_config: unconfig 1584 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1585 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ 1586 > $(obj)board/xilinx/ppc405-generic/config.tmp 1587 @echo "TEXT_BASE := 0x04000000" \ 1588 >> $(obj)board/xilinx/ppc405-generic/config.tmp 1589 @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx 1590 1591xilinx-ppc440-generic_flash_config: unconfig 1592 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1593 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1594 > $(obj)board/xilinx/ppc440-generic/config.tmp 1595 @echo "TEXT_BASE := 0xFE360000" \ 1596 >> $(obj)board/xilinx/ppc440-generic/config.tmp 1597 @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx 1598 1599xilinx-ppc440-generic_config: unconfig 1600 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1601 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1602 > $(obj)board/xilinx/ppc440-generic/config.tmp 1603 @echo "TEXT_BASE := 0x04000000" \ 1604 >> $(obj)board/xilinx/ppc440-generic/config.tmp 1605 @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx 1606 1607XPEDITE1K_config: unconfig 1608 @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k 1609 1610yosemite_config \ 1611yellowstone_config: unconfig 1612 @mkdir -p $(obj)include 1613 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1614 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1615 @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc 1616 1617yucca_config: unconfig 1618 @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc 1619 1620zeus_config: unconfig 1621 @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus 1622 1623######################################################################### 1624## MPC8220 Systems 1625######################################################################### 1626 1627Alaska8220_config \ 1628Yukon8220_config: unconfig 1629 @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska 1630 1631sorcery_config: unconfig 1632 @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery 1633 1634######################################################################### 1635## MPC824x Systems 1636######################################################################### 1637xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))) 1638 1639A3000_config: unconfig 1640 @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000 1641 1642barco_config: unconfig 1643 @$(MKCONFIG) $(@:_config=) ppc mpc824x barco 1644 1645BMW_config: unconfig 1646 @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw 1647 1648CPC45_config \ 1649CPC45_ROMBOOT_config: unconfig 1650 @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45 1651 @cd $(obj)include ; \ 1652 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1653 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1654 $(XECHO) "... booting from 8-bit flash" ; \ 1655 else \ 1656 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1657 $(XECHO) "... booting from 64-bit flash" ; \ 1658 fi; \ 1659 echo "export CONFIG_BOOT_ROM" >> config.mk; 1660 1661CU824_config: unconfig 1662 @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824 1663 1664debris_config: unconfig 1665 @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin 1666 1667eXalion_config: unconfig 1668 @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion 1669 1670HIDDEN_DRAGON_config: unconfig 1671 @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon 1672 1673kvme080_config: unconfig 1674 @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin 1675 1676# HDLAN is broken ATM. Should be fixed as soon as hardware is available and as 1677# time permits. 1678#linkstation_HDLAN_config \ 1679# Remove this line when HDLAN is fixed 1680linkstation_HGLAN_config: unconfig 1681 @mkdir -p $(obj)include 1682 @case $@ in \ 1683 *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \ 1684 *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \ 1685 esac 1686 @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation 1687 1688MOUSSE_config: unconfig 1689 @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse 1690 1691MUSENKI_config: unconfig 1692 @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki 1693 1694MVBLUE_config: unconfig 1695 @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue 1696 1697OXC_config: unconfig 1698 @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc 1699 1700PN62_config: unconfig 1701 @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62 1702 1703Sandpoint8240_config: unconfig 1704 @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint 1705 1706Sandpoint8245_config: unconfig 1707 @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint 1708 1709sbc8240_config: unconfig 1710 @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240 1711 1712SL8245_config: unconfig 1713 @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245 1714 1715utx8245_config: unconfig 1716 @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245 1717 1718######################################################################### 1719## MPC8260 Systems 1720######################################################################### 1721 1722atc_config: unconfig 1723 @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc 1724 1725cogent_mpc8260_config: unconfig 1726 @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent 1727 1728CPU86_config \ 1729CPU86_ROMBOOT_config: unconfig 1730 @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86 1731 @cd $(obj)include ; \ 1732 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1733 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1734 $(XECHO) "... booting from 8-bit flash" ; \ 1735 else \ 1736 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1737 $(XECHO) "... booting from 64-bit flash" ; \ 1738 fi; \ 1739 echo "export CONFIG_BOOT_ROM" >> config.mk; 1740 1741CPU87_config \ 1742CPU87_ROMBOOT_config: unconfig 1743 @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87 1744 @cd $(obj)include ; \ 1745 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1746 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1747 $(XECHO) "... booting from 8-bit flash" ; \ 1748 else \ 1749 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1750 $(XECHO) "... booting from 64-bit flash" ; \ 1751 fi; \ 1752 echo "export CONFIG_BOOT_ROM" >> config.mk; 1753 1754ep8248_config \ 1755ep8248E_config : unconfig 1756 @$(MKCONFIG) ep8248 ppc mpc8260 ep8248 1757 1758ep8260_config: unconfig 1759 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260 1760 1761ep82xxm_config: unconfig 1762 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm 1763 1764gw8260_config: unconfig 1765 @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260 1766 1767hymod_config: unconfig 1768 @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod 1769 1770IDS8247_config: unconfig 1771 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247 1772 1773IPHASE4539_config: unconfig 1774 @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539 1775 1776ISPAN_config \ 1777ISPAN_REVB_config: unconfig 1778 @mkdir -p $(obj)include 1779 @if [ "$(findstring _REVB_,$@)" ] ; then \ 1780 echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \ 1781 fi 1782 @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan 1783 1784mgcoge_config : unconfig 1785 @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile 1786 1787MPC8260ADS_config \ 1788MPC8260ADS_lowboot_config \ 1789MPC8260ADS_33MHz_config \ 1790MPC8260ADS_33MHz_lowboot_config \ 1791MPC8260ADS_40MHz_config \ 1792MPC8260ADS_40MHz_lowboot_config \ 1793MPC8272ADS_config \ 1794MPC8272ADS_lowboot_config \ 1795PQ2FADS_config \ 1796PQ2FADS_lowboot_config \ 1797PQ2FADS-VR_config \ 1798PQ2FADS-VR_lowboot_config \ 1799PQ2FADS-ZU_config \ 1800PQ2FADS-ZU_lowboot_config \ 1801PQ2FADS-ZU_66MHz_config \ 1802PQ2FADS-ZU_66MHz_lowboot_config \ 1803 : unconfig 1804 @mkdir -p $(obj)include 1805 @mkdir -p $(obj)board/freescale/mpc8260ads 1806 $(if $(findstring PQ2FADS,$@), \ 1807 @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \ 1808 @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h) 1809 $(if $(findstring MHz,$@), \ 1810 @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \ 1811 $(if $(findstring VR,$@), \ 1812 @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h)) 1813 @[ -z "$(findstring lowboot_,$@)" ] || \ 1814 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \ 1815 $(XECHO) "... with lowboot configuration" ; \ 1816 } 1817 @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale 1818 1819MPC8266ADS_config: unconfig 1820 @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale 1821 1822muas3001_dev_config \ 1823muas3001_config : unconfig 1824 @mkdir -p $(obj)include 1825 @mkdir -p $(obj)board/muas3001 1826 @if [ "$(findstring dev,$@)" ] ; then \ 1827 echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \ 1828 fi 1829 @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001 1830 1831# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash 1832PM825_config \ 1833PM825_ROMBOOT_config \ 1834PM825_BIGFLASH_config \ 1835PM825_ROMBOOT_BIGFLASH_config \ 1836PM826_config \ 1837PM826_ROMBOOT_config \ 1838PM826_BIGFLASH_config \ 1839PM826_ROMBOOT_BIGFLASH_config: unconfig 1840 @mkdir -p $(obj)include 1841 @mkdir -p $(obj)board/pm826 1842 @if [ "$(findstring PM825_,$@)" ] ; then \ 1843 echo "#define CONFIG_PCI" >$(obj)include/config.h ; \ 1844 else \ 1845 >$(obj)include/config.h ; \ 1846 fi 1847 @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1848 $(XECHO) "... booting from 8-bit flash" ; \ 1849 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 1850 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ 1851 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ 1852 $(XECHO) "... with 32 MB Flash" ; \ 1853 echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ 1854 fi; \ 1855 else \ 1856 $(XECHO) "... booting from 64-bit flash" ; \ 1857 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ 1858 $(XECHO) "... with 32 MB Flash" ; \ 1859 echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ 1860 echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \ 1861 else \ 1862 echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \ 1863 fi; \ 1864 fi 1865 @$(MKCONFIG) -a PM826 ppc mpc8260 pm826 1866 1867PM828_config \ 1868PM828_PCI_config \ 1869PM828_ROMBOOT_config \ 1870PM828_ROMBOOT_PCI_config: unconfig 1871 @mkdir -p $(obj)include 1872 @mkdir -p $(obj)board/pm826 1873 @if [ "$(findstring _PCI_,$@)" ] ; then \ 1874 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 1875 $(XECHO) "... with PCI enabled" ; \ 1876 fi 1877 @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1878 $(XECHO) "... booting from 8-bit flash" ; \ 1879 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 1880 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ 1881 fi 1882 @$(MKCONFIG) -a PM828 ppc mpc8260 pm828 1883 1884ppmc8260_config: unconfig 1885 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260 1886 1887Rattler8248_config \ 1888Rattler_config: unconfig 1889 @mkdir -p $(obj)include 1890 $(if $(findstring 8248,$@), \ 1891 @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) 1892 @$(MKCONFIG) -a Rattler ppc mpc8260 rattler 1893 1894RPXsuper_config: unconfig 1895 @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper 1896 1897rsdproto_config: unconfig 1898 @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto 1899 1900sacsng_config: unconfig 1901 @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng 1902 1903sbc8260_config: unconfig 1904 @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260 1905 1906SCM_config: unconfig 1907 @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens 1908 1909TQM8255_AA_config \ 1910TQM8260_AA_config \ 1911TQM8260_AB_config \ 1912TQM8260_AC_config \ 1913TQM8260_AD_config \ 1914TQM8260_AE_config \ 1915TQM8260_AF_config \ 1916TQM8260_AG_config \ 1917TQM8260_AH_config \ 1918TQM8260_AI_config \ 1919TQM8265_AA_config: unconfig 1920 @mkdir -p $(obj)include 1921 @case "$@" in \ 1922 TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \ 1923 TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \ 1924 TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ 1925 TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ 1926 TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1927 TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \ 1928 TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1929 TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \ 1930 TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \ 1931 TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1932 TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \ 1933 esac; \ 1934 if [ "$${CTYPE}" != "MPC8260" ] ; then \ 1935 echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \ 1936 fi; \ 1937 echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \ 1938 echo "... with $${CFREQ}MHz system clock" ; \ 1939 if [ "$${CACHE}" = "yes" ] ; then \ 1940 echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ 1941 $(XECHO) "... with L2 Cache support" ; \ 1942 else \ 1943 echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ 1944 $(XECHO) "... without L2 Cache support" ; \ 1945 fi; \ 1946 if [ "$${BMODE}" = "60x" ] ; then \ 1947 echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ 1948 $(XECHO) "... with 60x Bus Mode" ; \ 1949 else \ 1950 echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ 1951 $(XECHO) "... without 60x Bus Mode" ; \ 1952 fi 1953 @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc 1954 1955TQM8272_config: unconfig 1956 @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc 1957 1958VoVPN-GW_66MHz_config \ 1959VoVPN-GW_100MHz_config: unconfig 1960 @mkdir -p $(obj)include 1961 @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h 1962 @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk 1963 1964ZPC1900_config: unconfig 1965 @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900 1966 1967######################################################################### 1968## Coldfire 1969######################################################################### 1970 1971M52277EVB_config \ 1972M52277EVB_spansion_config \ 1973M52277EVB_stmicro_config : unconfig 1974 @case "$@" in \ 1975 M52277EVB_config) FLASH=SPANSION;; \ 1976 M52277EVB_spansion_config) FLASH=SPANSION;; \ 1977 M52277EVB_stmicro_config) FLASH=STMICRO;; \ 1978 esac; \ 1979 if [ "$${FLASH}" = "SPANSION" ] ; then \ 1980 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ 1981 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \ 1982 cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \ 1983 $(XECHO) "... with SPANSION boot..." ; \ 1984 fi; \ 1985 if [ "$${FLASH}" = "STMICRO" ] ; then \ 1986 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 1987 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 1988 echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \ 1989 cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \ 1990 $(XECHO) "... with ST Micro boot..." ; \ 1991 fi 1992 @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale 1993 1994M5235EVB_config \ 1995M5235EVB_Flash16_config \ 1996M5235EVB_Flash32_config: unconfig 1997 @case "$@" in \ 1998 M5235EVB_config) FLASH=16;; \ 1999 M5235EVB_Flash16_config) FLASH=16;; \ 2000 M5235EVB_Flash32_config) FLASH=32;; \ 2001 esac; \ 2002 if [ "$${FLASH}" != "16" ] ; then \ 2003 echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \ 2004 echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ 2005 cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \ 2006 else \ 2007 echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ 2008 cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \ 2009 fi 2010 @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale 2011 2012M5249EVB_config : unconfig 2013 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale 2014 2015M5253DEMO_config : unconfig 2016 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale 2017 2018M5253EVBE_config : unconfig 2019 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale 2020 2021cobra5272_config : unconfig 2022 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272 2023 2024EB+MCF-EV123_config : unconfig 2025 @mkdir -p $(obj)include 2026 @mkdir -p $(obj)board/BuS/EB+MCF-EV123 2027 @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk 2028 @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS 2029 2030EB+MCF-EV123_internal_config : unconfig 2031 @mkdir -p $(obj)include 2032 @mkdir -p $(obj)board/BuS/EB+MCF-EV123 2033 @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk 2034 @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS 2035 2036idmr_config : unconfig 2037 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr 2038 2039M5271EVB_config : unconfig 2040 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale 2041 2042M5272C3_config : unconfig 2043 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale 2044 2045M5275EVB_config : unconfig 2046 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale 2047 2048M5282EVB_config : unconfig 2049 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale 2050 2051M53017EVB_config : unconfig 2052 @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale 2053 2054M5329AFEE_config \ 2055M5329BFEE_config : unconfig 2056 @case "$@" in \ 2057 M5329AFEE_config) NAND=0;; \ 2058 M5329BFEE_config) NAND=16;; \ 2059 esac; \ 2060 if [ "$${NAND}" != "0" ] ; then \ 2061 echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ 2062 fi 2063 @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale 2064 2065M5373EVB_config : unconfig 2066 @case "$@" in \ 2067 M5373EVB_config) NAND=16;; \ 2068 esac; \ 2069 if [ "$${NAND}" != "0" ] ; then \ 2070 echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ 2071 fi 2072 @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale 2073 2074M54451EVB_config \ 2075M54451EVB_spansion_config \ 2076M54451EVB_stmicro_config : unconfig 2077 @case "$@" in \ 2078 M54451EVB_config) FLASH=SPANSION;; \ 2079 M54451EVB_spansion_config) FLASH=SPANSION;; \ 2080 M54451EVB_stmicro_config) FLASH=STMICRO;; \ 2081 esac; \ 2082 if [ "$${FLASH}" = "SPANSION" ] ; then \ 2083 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ 2084 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \ 2085 cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \ 2086 $(XECHO) "... with SPANSION boot..." ; \ 2087 fi; \ 2088 if [ "$${FLASH}" = "STMICRO" ] ; then \ 2089 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 2090 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 2091 echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \ 2092 cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \ 2093 $(XECHO) "... with ST Micro boot..." ; \ 2094 fi; \ 2095 echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ; 2096 @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale 2097 2098M54455EVB_config \ 2099M54455EVB_atmel_config \ 2100M54455EVB_intel_config \ 2101M54455EVB_a33_config \ 2102M54455EVB_a66_config \ 2103M54455EVB_i33_config \ 2104M54455EVB_i66_config \ 2105M54455EVB_stm33_config : unconfig 2106 @case "$@" in \ 2107 M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \ 2108 M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \ 2109 M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \ 2110 M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \ 2111 M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \ 2112 M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \ 2113 M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \ 2114 M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \ 2115 esac; \ 2116 if [ "$${FLASH}" = "INTEL" ] ; then \ 2117 echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \ 2118 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2119 cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2120 $(XECHO) "... with INTEL boot..." ; \ 2121 fi; \ 2122 if [ "$${FLASH}" = "ATMEL" ] ; then \ 2123 echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \ 2124 echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2125 cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2126 $(XECHO) "... with ATMEL boot..." ; \ 2127 fi; \ 2128 if [ "$${FLASH}" = "STMICRO" ] ; then \ 2129 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 2130 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 2131 echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2132 cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2133 $(XECHO) "... with ST Micro boot..." ; \ 2134 fi; \ 2135 echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ 2136 $(XECHO) "... with $${FREQ}Hz input clock" 2137 @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale 2138 2139M5475AFE_config \ 2140M5475BFE_config \ 2141M5475CFE_config \ 2142M5475DFE_config \ 2143M5475EFE_config \ 2144M5475FFE_config \ 2145M5475GFE_config : unconfig 2146 @case "$@" in \ 2147 M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2148 M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ 2149 M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ 2150 M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ 2151 M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ 2152 M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ 2153 M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2154 esac; \ 2155 echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \ 2156 echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ 2157 echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ 2158 if [ "$${RAM1}" != "0" ] ; then \ 2159 echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ 2160 fi; \ 2161 if [ "$${CODE}" != "0" ] ; then \ 2162 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ 2163 fi; \ 2164 if [ "$${VID}" == "1" ] ; then \ 2165 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ 2166 fi; \ 2167 if [ "$${USB}" == "1" ] ; then \ 2168 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ 2169 fi 2170 @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale 2171 2172M5485AFE_config \ 2173M5485BFE_config \ 2174M5485CFE_config \ 2175M5485DFE_config \ 2176M5485EFE_config \ 2177M5485FFE_config \ 2178M5485GFE_config \ 2179M5485HFE_config : unconfig 2180 @case "$@" in \ 2181 M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2182 M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ 2183 M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ 2184 M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ 2185 M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ 2186 M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ 2187 M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2188 M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \ 2189 esac; \ 2190 echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \ 2191 echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ 2192 echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ 2193 if [ "$${RAM1}" != "0" ] ; then \ 2194 echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ 2195 fi; \ 2196 if [ "$${CODE}" != "0" ] ; then \ 2197 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ 2198 fi; \ 2199 if [ "$${VID}" == "1" ] ; then \ 2200 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ 2201 fi; \ 2202 if [ "$${USB}" == "1" ] ; then \ 2203 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ 2204 fi 2205 @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale 2206 2207TASREG_config : unconfig 2208 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd 2209 2210######################################################################### 2211## MPC83xx Systems 2212######################################################################### 2213 2214kmeter1_config: unconfig 2215 @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile 2216 2217MPC8313ERDB_33_config \ 2218MPC8313ERDB_66_config \ 2219MPC8313ERDB_NAND_33_config \ 2220MPC8313ERDB_NAND_66_config: unconfig 2221 @mkdir -p $(obj)include 2222 @mkdir -p $(obj)board/freescale/mpc8313erdb 2223 @if [ "$(findstring _33_,$@)" ] ; then \ 2224 $(XECHO) -n "...33M ..." ; \ 2225 echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \ 2226 fi ; \ 2227 if [ "$(findstring _66_,$@)" ] ; then \ 2228 $(XECHO) -n "...66M..." ; \ 2229 echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \ 2230 fi ; \ 2231 if [ "$(findstring _NAND_,$@)" ] ; then \ 2232 $(XECHO) -n "...NAND..." ; \ 2233 echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \ 2234 echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \ 2235 fi ; 2236 @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale 2237 @if [ "$(findstring _NAND_,$@)" ] ; then \ 2238 echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \ 2239 fi ; 2240 2241MPC8315ERDB_config: unconfig 2242 @$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale 2243 2244MPC8323ERDB_config: unconfig 2245 @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale 2246 2247MPC832XEMDS_config \ 2248MPC832XEMDS_HOST_33_config \ 2249MPC832XEMDS_HOST_66_config \ 2250MPC832XEMDS_SLAVE_config \ 2251MPC832XEMDS_ATM_config: unconfig 2252 @mkdir -p $(obj)include 2253 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2254 $(XECHO) -n "... PCI HOST " ; \ 2255 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2256 fi ; \ 2257 if [ "$(findstring _SLAVE_,$@)" ] ; then \ 2258 $(XECHO) "...PCI SLAVE 66M" ; \ 2259 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2260 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ 2261 fi ; \ 2262 if [ "$(findstring _33_,$@)" ] ; then \ 2263 $(XECHO) -n "...33M ..." ; \ 2264 echo "#define PCI_33M" >>$(obj)include/config.h ; \ 2265 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2266 fi ; \ 2267 if [ "$(findstring _66_,$@)" ] ; then \ 2268 $(XECHO) -n "...66M..." ; \ 2269 echo "#define PCI_66M" >>$(obj)include/config.h ; \ 2270 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2271 fi ; \ 2272 if [ "$(findstring _ATM_,$@)" ] ; then \ 2273 $(XECHO) -n "...ATM..." ; \ 2274 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2275 echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ 2276 fi ; 2277 @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale 2278 2279MPC8349EMDS_config: unconfig 2280 @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale 2281 2282MPC8349ITX_config \ 2283MPC8349ITX_LOWBOOT_config \ 2284MPC8349ITXGP_config: unconfig 2285 @mkdir -p $(obj)include 2286 @mkdir -p $(obj)board/freescale/mpc8349itx 2287 @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h 2288 @if [ "$(findstring GP,$@)" ] ; then \ 2289 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ 2290 fi 2291 @if [ "$(findstring LOWBOOT,$@)" ] ; then \ 2292 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ 2293 fi 2294 @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale 2295 2296MPC8360EMDS_config \ 2297MPC8360EMDS_HOST_33_config \ 2298MPC8360EMDS_HOST_66_config \ 2299MPC8360EMDS_SLAVE_config \ 2300MPC8360EMDS_ATM_config: unconfig 2301 @mkdir -p $(obj)include 2302 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2303 $(XECHO) -n "... PCI HOST " ; \ 2304 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2305 fi ; \ 2306 if [ "$(findstring _SLAVE_,$@)" ] ; then \ 2307 $(XECHO) "...PCI SLAVE 66M" ; \ 2308 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2309 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ 2310 fi ; \ 2311 if [ "$(findstring _33_,$@)" ] ; then \ 2312 $(XECHO) -n "...33M ..." ; \ 2313 echo "#define PCI_33M" >>$(obj)include/config.h ; \ 2314 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2315 fi ; \ 2316 if [ "$(findstring _66_,$@)" ] ; then \ 2317 $(XECHO) -n "...66M..." ; \ 2318 echo "#define PCI_66M" >>$(obj)include/config.h ; \ 2319 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2320 fi ; \ 2321 if [ "$(findstring _ATM_,$@)" ] ; then \ 2322 $(XECHO) -n "...ATM..." ; \ 2323 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2324 echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ 2325 fi ; 2326 @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale 2327 2328MPC8360ERDK_33_config \ 2329MPC8360ERDK_66_config \ 2330MPC8360ERDK_config: unconfig 2331 @mkdir -p $(obj)include 2332 @if [ "$(findstring _33_,$@)" ] ; then \ 2333 $(XECHO) -n "... CLKIN 33MHz " ; \ 2334 echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\ 2335 fi ; 2336 @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale 2337 2338MPC837XEMDS_config \ 2339MPC837XEMDS_HOST_config: unconfig 2340 @mkdir -p $(obj)include 2341 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2342 $(XECHO) -n "... PCI HOST " ; \ 2343 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2344 fi ; 2345 @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale 2346 2347MPC837XERDB_config: unconfig 2348 @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale 2349 2350MVBLM7_config: unconfig 2351 @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision 2352 2353sbc8349_config: unconfig 2354 @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349 2355 2356SIMPC8313_LP_config \ 2357SIMPC8313_SP_config: unconfig 2358 @mkdir -p $(obj)include 2359 @mkdir -p $(obj)board/sheldon/simpc8313 2360 @if [ "$(findstring _LP_,$@)" ] ; then \ 2361 $(XECHO) -n "...Large Page NAND..." ; \ 2362 echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \ 2363 fi ; \ 2364 if [ "$(findstring _SP_,$@)" ] ; then \ 2365 $(XECHO) -n "...Small Page NAND..." ; \ 2366 echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \ 2367 fi ; 2368 @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon 2369 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 2370 2371TQM834x_config: unconfig 2372 @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc 2373 2374 2375######################################################################### 2376## MPC85xx Systems 2377######################################################################### 2378 2379ATUM8548_config: unconfig 2380 @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548 2381 2382MPC8536DS_config: unconfig 2383 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8536ds freescale 2384 2385MPC8540ADS_config: unconfig 2386 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale 2387 2388MPC8540EVAL_config \ 2389MPC8540EVAL_33_config \ 2390MPC8540EVAL_66_config \ 2391MPC8540EVAL_33_slave_config \ 2392MPC8540EVAL_66_slave_config: unconfig 2393 @mkdir -p $(obj)include 2394 @if [ "$(findstring _33_,$@)" ] ; then \ 2395 $(XECHO) "... 33 MHz PCI" ; \ 2396 else \ 2397 echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \ 2398 $(XECHO) "... 66 MHz PCI" ; \ 2399 fi ; \ 2400 if [ "$(findstring _slave_,$@)" ] ; then \ 2401 echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \ 2402 $(XECHO) " slave" ; \ 2403 else \ 2404 $(XECHO) " host" ; \ 2405 fi 2406 @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval 2407 2408MPC8560ADS_config: unconfig 2409 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale 2410 2411MPC8541CDS_legacy_config \ 2412MPC8541CDS_config: unconfig 2413 @mkdir -p $(obj)include 2414 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2415 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2416 $(XECHO) "... legacy" ; \ 2417 fi 2418 @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale 2419 2420MPC8544DS_config: unconfig 2421 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale 2422 2423MPC8548CDS_legacy_config \ 2424MPC8548CDS_config: unconfig 2425 @mkdir -p $(obj)include 2426 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2427 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2428 $(XECHO) "... legacy" ; \ 2429 fi 2430 @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale 2431 2432MPC8555CDS_legacy_config \ 2433MPC8555CDS_config: unconfig 2434 @mkdir -p $(obj)include 2435 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2436 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2437 $(XECHO) "... legacy" ; \ 2438 fi 2439 @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale 2440 2441MPC8568MDS_config: unconfig 2442 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale 2443 2444MPC8569MDS_config: unconfig 2445 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8569mds freescale 2446 2447MPC8572DS_36BIT_config \ 2448MPC8572DS_config: unconfig 2449 @mkdir -p $(obj)include 2450 @if [ "$(findstring _36BIT_,$@)" ] ; then \ 2451 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ 2452 $(XECHO) "... enabling 36-bit physical addressing." ; \ 2453 fi 2454 @$(MKCONFIG) -a MPC8572DS ppc mpc85xx mpc8572ds freescale 2455 2456P2020DS_36BIT_config \ 2457P2020DS_config: unconfig 2458 @mkdir -p $(obj)include 2459 @if [ "$(findstring _36BIT_,$@)" ] ; then \ 2460 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ 2461 $(XECHO) "... enabling 36-bit physical addressing." ; \ 2462 fi 2463 @$(MKCONFIG) -a P2020DS ppc mpc85xx p2020ds freescale 2464 2465PM854_config: unconfig 2466 @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854 2467 2468PM856_config: unconfig 2469 @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856 2470 2471sbc8540_config \ 2472sbc8540_33_config \ 2473sbc8540_66_config: unconfig 2474 @mkdir -p $(obj)include 2475 @if [ "$(findstring _66_,$@)" ] ; then \ 2476 echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ 2477 $(XECHO) "... 66 MHz PCI" ; \ 2478 else \ 2479 $(XECHO) "... 33 MHz PCI" ; \ 2480 fi 2481 @$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560 2482 2483sbc8548_config: unconfig 2484 @$(MKCONFIG) $(@:_config=) ppc mpc85xx sbc8548 2485 2486sbc8560_config \ 2487sbc8560_33_config \ 2488sbc8560_66_config: unconfig 2489 @mkdir -p $(obj)include 2490 @if [ "$(findstring _66_,$@)" ] ; then \ 2491 echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ 2492 $(XECHO) "... 66 MHz PCI" ; \ 2493 else \ 2494 $(XECHO) "... 33 MHz PCI" ; \ 2495 fi 2496 @$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560 2497 2498socrates_config: unconfig 2499 @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates 2500 2501stxgp3_config: unconfig 2502 @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 2503 2504stxssa_config \ 2505stxssa_4M_config: unconfig 2506 @mkdir -p $(obj)include 2507 @if [ "$(findstring _4M_,$@)" ] ; then \ 2508 echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \ 2509 $(XECHO) "... with 4 MiB flash memory" ; \ 2510 fi 2511 @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa 2512 2513TQM8540_config \ 2514TQM8541_config \ 2515TQM8548_config \ 2516TQM8548_AG_config \ 2517TQM8548_BE_config \ 2518TQM8555_config \ 2519TQM8560_config: unconfig 2520 @mkdir -p $(obj)include 2521 @BTYPE=$(@:_config=); \ 2522 CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \ 2523 $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \ 2524 echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \ 2525 echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \ 2526 echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \ 2527 echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h; 2528 @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc 2529 @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk; 2530 2531XPEDITE5200_config: unconfig 2532 @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes 2533 2534XPEDITE5370_config: unconfig 2535 @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes 2536 2537######################################################################### 2538## MPC86xx Systems 2539######################################################################### 2540 2541MPC8610HPCD_config: unconfig 2542 @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale 2543 2544MPC8641HPCN_36BIT_config \ 2545MPC8641HPCN_config: unconfig 2546 @mkdir -p $(obj)include 2547 @if [ "$(findstring _36BIT_,$@)" ] ; then \ 2548 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ 2549 $(XECHO) "... enabling 36-bit physical addressing." ; \ 2550 fi 2551 @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale 2552 2553sbc8641d_config: unconfig 2554 @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d 2555 2556XPEDITE5170_config: unconfig 2557 @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes 2558 2559######################################################################### 2560## 74xx/7xx Systems 2561######################################################################### 2562 2563AmigaOneG3SE_config: unconfig 2564 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI 2565 2566BAB7xx_config: unconfig 2567 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec 2568 2569CPCI750_config: unconfig 2570 @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd 2571 2572DB64360_config: unconfig 2573 @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell 2574 2575DB64460_config: unconfig 2576 @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell 2577 2578ELPPC_config: unconfig 2579 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec 2580 2581EVB64260_config \ 2582EVB64260_750CX_config: unconfig 2583 @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260 2584 2585mpc7448hpc2_config: unconfig 2586 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale 2587 2588P3G4_config: unconfig 2589 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 2590 2591p3m750_config \ 2592p3m7448_config: unconfig 2593 @mkdir -p $(obj)include 2594 @if [ "$(findstring 750_,$@)" ] ; then \ 2595 echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \ 2596 else \ 2597 echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \ 2598 fi 2599 @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive 2600 2601PCIPPC2_config \ 2602PCIPPC6_config: unconfig 2603 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2 2604 2605ppmc7xx_config: unconfig 2606 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx 2607 2608ZUMA_config: unconfig 2609 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 2610 2611#======================================================================== 2612# ARM 2613#======================================================================== 2614######################################################################### 2615## StrongARM Systems 2616######################################################################### 2617 2618assabet_config : unconfig 2619 @$(MKCONFIG) $(@:_config=) arm sa1100 assabet 2620 2621dnp1110_config : unconfig 2622 @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110 2623 2624gcplus_config : unconfig 2625 @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus 2626 2627lart_config : unconfig 2628 @$(MKCONFIG) $(@:_config=) arm sa1100 lart 2629 2630shannon_config : unconfig 2631 @$(MKCONFIG) $(@:_config=) arm sa1100 shannon 2632 2633######################################################################### 2634## ARM92xT Systems 2635######################################################################### 2636 2637######################################################################### 2638## Atmel AT91RM9200 Systems 2639######################################################################### 2640 2641at91rm9200dk_config : unconfig 2642 @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 2643 2644at91rm9200ek_config : unconfig 2645 @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200 2646 2647cmc_pu2_config : unconfig 2648 @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 2649 2650csb637_config : unconfig 2651 @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200 2652 2653kb9202_config : unconfig 2654 @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200 2655 2656m501sk_config : unconfig 2657 @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200 2658 2659mp2usb_config : unconfig 2660 @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200 2661 2662######################################################################### 2663## Atmel ARM926EJ-S Systems 2664######################################################################### 2665 2666afeb9260_config: unconfig 2667 @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91 2668 2669at91cap9adk_config : unconfig 2670 @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91 2671 2672at91sam9260ek_nandflash_config \ 2673at91sam9260ek_dataflash_cs0_config \ 2674at91sam9260ek_dataflash_cs1_config \ 2675at91sam9260ek_config \ 2676at91sam9g20ek_nandflash_config \ 2677at91sam9g20ek_dataflash_cs0_config \ 2678at91sam9g20ek_dataflash_cs1_config \ 2679at91sam9g20ek_config : unconfig 2680 @mkdir -p $(obj)include 2681 @if [ "$(findstring 9g20,$@)" ] ; then \ 2682 echo "#define CONFIG_AT91SAM9G20EK 1" >>$(obj)include/config.h ; \ 2683 $(XECHO) "... 9G20 Variant" ; \ 2684 else \ 2685 echo "#define CONFIG_AT91SAM9260EK 1" >>$(obj)include/config.h ; \ 2686 fi; 2687 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2688 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2689 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2690 elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ 2691 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ 2692 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2693 else \ 2694 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ 2695 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ 2696 fi; 2697 @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 2698 2699at91sam9xeek_nandflash_config \ 2700at91sam9xeek_dataflash_cs0_config \ 2701at91sam9xeek_dataflash_cs1_config \ 2702at91sam9xeek_config : unconfig 2703 @mkdir -p $(obj)include 2704 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2705 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2706 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2707 elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ 2708 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ 2709 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2710 else \ 2711 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ 2712 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ 2713 fi; 2714 @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 2715 2716at91sam9261ek_nandflash_config \ 2717at91sam9261ek_dataflash_cs0_config \ 2718at91sam9261ek_dataflash_cs3_config \ 2719at91sam9261ek_config \ 2720at91sam9g10ek_nandflash_config \ 2721at91sam9g10ek_dataflash_cs0_config \ 2722at91sam9g10ek_dataflash_cs3_config \ 2723at91sam9g10ek_config : unconfig 2724 @mkdir -p $(obj)include 2725 @if [ "$(findstring 9g10,$@)" ] ; then \ 2726 echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \ 2727 $(XECHO) "... 9G10 Variant" ; \ 2728 else \ 2729 echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \ 2730 fi; 2731 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2732 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2733 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2734 elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ 2735 echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ 2736 $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \ 2737 else \ 2738 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ 2739 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2740 fi; 2741 @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91 2742 2743at91sam9263ek_norflash_config \ 2744at91sam9263ek_norflash_boot_config \ 2745at91sam9263ek_nandflash_config \ 2746at91sam9263ek_dataflash_config \ 2747at91sam9263ek_dataflash_cs0_config \ 2748at91sam9263ek_config : unconfig 2749 @mkdir -p $(obj)include 2750 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2751 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2752 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2753 elif [ "$(findstring norflash,$@)" ] ; then \ 2754 echo "#define CONFIG_SYS_USE_NORFLASH 1" >>$(obj)include/config.h ; \ 2755 $(XECHO) "... with environment variable in NOR FLASH" ; \ 2756 else \ 2757 echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ 2758 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2759 fi; 2760 @if [ "$(findstring norflash_boot,$@)" ] ; then \ 2761 echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1" >>$(obj)include/config.h ; \ 2762 $(XECHO) "... and boot from NOR FLASH" ; \ 2763 fi; 2764 @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91 2765 2766at91sam9rlek_nandflash_config \ 2767at91sam9rlek_dataflash_config \ 2768at91sam9rlek_dataflash_cs0_config \ 2769at91sam9rlek_config : unconfig 2770 @mkdir -p $(obj)include 2771 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2772 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2773 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2774 else \ 2775 echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ 2776 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2777 fi; 2778 @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 2779 2780meesc_config : unconfig 2781 @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91 2782 2783pm9261_config : unconfig 2784 @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91 2785 2786at91sam9m10g45ek_nandflash_config \ 2787at91sam9m10g45ek_dataflash_config \ 2788at91sam9m10g45ek_dataflash_cs0_config \ 2789at91sam9m10g45ek_config \ 2790at91sam9g45ekes_nandflash_config \ 2791at91sam9g45ekes_dataflash_config \ 2792at91sam9g45ekes_dataflash_cs0_config \ 2793at91sam9g45ekes_config : unconfig 2794 @mkdir -p $(obj)include 2795 @if [ "$(findstring 9m10,$@)" ] ; then \ 2796 echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \ 2797 $(XECHO) "... 9M10G45 Variant" ; \ 2798 else \ 2799 echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \ 2800 fi; 2801 2802 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2803 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2804 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2805 else \ 2806 echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \ 2807 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2808 fi; 2809 @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 2810 2811pm9263_config : unconfig 2812 @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91 2813 2814######################################################################## 2815## ARM Integrator boards - see doc/README-integrator for more info. 2816integratorap_config \ 2817ap_config \ 2818ap966_config \ 2819ap922_config \ 2820ap922_XA10_config \ 2821ap7_config \ 2822ap720t_config \ 2823ap920t_config \ 2824ap926ejs_config \ 2825ap946es_config: unconfig 2826 @board/armltd/integrator/split_by_variant.sh ap $@ 2827 2828integratorcp_config \ 2829cp_config \ 2830cp920t_config \ 2831cp926ejs_config \ 2832cp946es_config \ 2833cp1136_config \ 2834cp966_config \ 2835cp922_config \ 2836cp922_XA10_config \ 2837cp1026_config: unconfig 2838 @board/armltd/integrator/split_by_variant.sh cp $@ 2839 2840davinci_dvevm_config : unconfig 2841 @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci 2842 2843davinci_schmoogie_config : unconfig 2844 @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci 2845 2846davinci_sffsdr_config : unconfig 2847 @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci 2848 2849davinci_sonata_config : unconfig 2850 @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci 2851 2852davinci_dm355evm_config : unconfig 2853 @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci 2854 2855lpd7a400_config \ 2856lpd7a404_config: unconfig 2857 @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x 2858 2859mv88f6281gtw_ge_config: unconfig 2860 @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood 2861 2862mx1ads_config : unconfig 2863 @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx 2864 2865mx1fs2_config : unconfig 2866 @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx 2867 2868netstar_config: unconfig 2869 @$(MKCONFIG) $(@:_config=) arm arm925t netstar 2870 2871nhk8815_config \ 2872nhk8815_onenand_config: unconfig 2873 @mkdir -p $(obj)include 2874 @ > $(obj)include/config.h 2875 @if [ "$(findstring _onenand, $@)" ] ; then \ 2876 echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \ 2877 $(XECHO) "... configured to boot from OneNand Flash"; \ 2878 else \ 2879 $(XECHO) "... configured to boot from Nand Flash"; \ 2880 fi 2881 @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik 2882 2883omap1510inn_config : unconfig 2884 @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn 2885 2886xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) 2887 2888omap1610inn_config \ 2889omap1610inn_cs0boot_config \ 2890omap1610inn_cs3boot_config \ 2891omap1610inn_cs_autoboot_config \ 2892omap1610h2_config \ 2893omap1610h2_cs0boot_config \ 2894omap1610h2_cs3boot_config \ 2895omap1610h2_cs_autoboot_config: unconfig 2896 @mkdir -p $(obj)include 2897 @if [ "$(findstring _cs0boot_, $@)" ] ; then \ 2898 echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \ 2899 $(XECHO) "... configured for CS0 boot"; \ 2900 elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ 2901 echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \ 2902 $(XECHO) "... configured for CS_AUTO boot"; \ 2903 else \ 2904 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ 2905 $(XECHO) "... configured for CS3 boot"; \ 2906 fi; 2907 @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap 2908 2909omap5912osk_config : unconfig 2910 @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap 2911 2912xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) 2913 2914omap730p2_config \ 2915omap730p2_cs0boot_config \ 2916omap730p2_cs3boot_config : unconfig 2917 @mkdir -p $(obj)include 2918 @if [ "$(findstring _cs0boot_, $@)" ] ; then \ 2919 echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \ 2920 $(XECHO) "... configured for CS0 boot"; \ 2921 else \ 2922 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ 2923 $(XECHO) "... configured for CS3 boot"; \ 2924 fi; 2925 @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap 2926 2927rd6281a_config: unconfig 2928 @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood 2929 2930sbc2410x_config: unconfig 2931 @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 2932 2933scb9328_config : unconfig 2934 @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx 2935 2936sheevaplug_config: unconfig 2937 @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood 2938 2939smdk2400_config : unconfig 2940 @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0 2941 2942smdk2410_config : unconfig 2943 @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0 2944 2945SX1_stdout_serial_config \ 2946SX1_config: unconfig 2947 @mkdir -p $(obj)include 2948 @if [ "$(findstring _stdout_serial_, $@)" ] ; then \ 2949 echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ 2950 $(XECHO) "... configured for stdout serial"; \ 2951 else \ 2952 echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ 2953 $(XECHO) "... configured for stdout usbtty"; \ 2954 fi; 2955 @$(MKCONFIG) SX1 arm arm925t sx1 2956 2957# TRAB default configuration: 8 MB Flash, 32 MB RAM 2958xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1)))) 2959 2960trab_config \ 2961trab_bigram_config \ 2962trab_bigflash_config \ 2963trab_old_config: unconfig 2964 @mkdir -p $(obj)include 2965 @mkdir -p $(obj)board/trab 2966 @[ -z "$(findstring _bigram,$@)" ] || \ 2967 { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ 2968 echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \ 2969 $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \ 2970 } 2971 @[ -z "$(findstring _bigflash,$@)" ] || \ 2972 { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \ 2973 echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ 2974 $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \ 2975 echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ 2976 } 2977 @[ -z "$(findstring _old,$@)" ] || \ 2978 { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ 2979 echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ 2980 $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \ 2981 echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ 2982 } 2983 @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 2984 2985VCMA9_config : unconfig 2986 @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0 2987 2988######################################################################### 2989# ARM supplied Versatile development boards 2990######################################################################### 2991 2992cm4008_config : unconfig 2993 @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695 2994 2995cm41xx_config : unconfig 2996 @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 2997 2998versatile_config \ 2999versatileab_config \ 3000versatilepb_config : unconfig 3001 @board/armltd/versatile/split_by_variant.sh $@ 3002 3003voiceblue_config: unconfig 3004 @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue 3005 3006######################################################################### 3007## S3C44B0 Systems 3008######################################################################### 3009 3010B2_config : unconfig 3011 @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave 3012 3013######################################################################### 3014## ARM720T Systems 3015######################################################################### 3016 3017armadillo_config: unconfig 3018 @$(MKCONFIG) $(@:_config=) arm arm720t armadillo 3019 3020ep7312_config : unconfig 3021 @$(MKCONFIG) $(@:_config=) arm arm720t ep7312 3022 3023impa7_config : unconfig 3024 @$(MKCONFIG) $(@:_config=) arm arm720t impa7 3025 3026modnet50_config : unconfig 3027 @$(MKCONFIG) $(@:_config=) arm arm720t modnet50 3028 3029evb4510_config : unconfig 3030 @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b 3031 3032lpc2292sodimm_config: unconfig 3033 @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292 3034 3035SMN42_config : unconfig 3036 @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292 3037 3038######################################################################### 3039## ARM CORTEX Systems 3040######################################################################### 3041 3042omap3_beagle_config : unconfig 3043 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle omap3 omap3 3044 3045omap3_overo_config : unconfig 3046 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo omap3 omap3 3047 3048omap3_evm_config : unconfig 3049 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm omap3 omap3 3050 3051omap3_pandora_config : unconfig 3052 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora omap3 omap3 3053 3054omap3_zoom1_config : unconfig 3055 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 omap3 omap3 3056 3057omap3_zoom2_config : unconfig 3058 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 omap3 omap3 3059 3060######################################################################### 3061## XScale Systems 3062######################################################################### 3063 3064actux1_config : unconfig 3065 @$(MKCONFIG) $(@:_config=) arm ixp actux1 3066 3067actux2_config : unconfig 3068 @$(MKCONFIG) $(@:_config=) arm ixp actux2 3069 3070actux3_config : unconfig 3071 @$(MKCONFIG) $(@:_config=) arm ixp actux3 3072 3073actux4_config : unconfig 3074 @$(MKCONFIG) $(@:_config=) arm ixp actux4 3075 3076cerf250_config : unconfig 3077 @$(MKCONFIG) $(@:_config=) arm pxa cerf250 3078 3079cradle_config : unconfig 3080 @$(MKCONFIG) $(@:_config=) arm pxa cradle 3081 3082csb226_config : unconfig 3083 @$(MKCONFIG) $(@:_config=) arm pxa csb226 3084 3085delta_config : unconfig 3086 @$(MKCONFIG) $(@:_config=) arm pxa delta 3087 3088innokom_config : unconfig 3089 @$(MKCONFIG) $(@:_config=) arm pxa innokom 3090 3091ixdp425_config : unconfig 3092 @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 3093 3094ixdpg425_config : unconfig 3095 @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 3096 3097lubbock_config : unconfig 3098 @$(MKCONFIG) $(@:_config=) arm pxa lubbock 3099 3100pleb2_config : unconfig 3101 @$(MKCONFIG) $(@:_config=) arm pxa pleb2 3102 3103logodl_config : unconfig 3104 @$(MKCONFIG) $(@:_config=) arm pxa logodl 3105 3106pdnb3_config \ 3107scpu_config: unconfig 3108 @mkdir -p $(obj)include 3109 @if [ "$(findstring scpu_,$@)" ] ; then \ 3110 echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \ 3111 $(XECHO) "... on SCPU board variant" ; \ 3112 fi 3113 @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive 3114 3115pxa255_idp_config: unconfig 3116 @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp 3117 3118polaris_config \ 3119trizepsiv_config : unconfig 3120 @mkdir -p $(obj)include 3121 @if [ "$(findstring polaris,$@)" ] ; then \ 3122 echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \ 3123 fi; 3124 @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv 3125 3126wepep250_config : unconfig 3127 @$(MKCONFIG) $(@:_config=) arm pxa wepep250 3128 3129xaeniax_config : unconfig 3130 @$(MKCONFIG) $(@:_config=) arm pxa xaeniax 3131 3132xm250_config : unconfig 3133 @$(MKCONFIG) $(@:_config=) arm pxa xm250 3134 3135xsengine_config : unconfig 3136 @$(MKCONFIG) $(@:_config=) arm pxa xsengine 3137 3138zylonite_config : 3139 @$(MKCONFIG) $(@:_config=) arm pxa zylonite 3140 3141######################################################################### 3142## ARM1136 Systems 3143######################################################################### 3144 3145apollon_config : unconfig 3146 @mkdir -p $(obj)include 3147 @mkdir -p $(obj)onenand_ipl/board/apollon 3148 @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h 3149 @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx 3150 @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk 3151 3152imx31_litekit_config : unconfig 3153 @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31 3154 3155imx31_phycore_eet_config \ 3156imx31_phycore_config : unconfig 3157 @mkdir -p $(obj)include 3158 @if [ -n "$(findstring _eet_,$@)" ]; then \ 3159 echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \ 3160 fi 3161 @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31 3162 3163mx31ads_config : unconfig 3164 @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31 3165 3166mx31pdk_config \ 3167mx31pdk_nand_config : unconfig 3168 @mkdir -p $(obj)include 3169 @if [ -n "$(findstring _nand_,$@)" ]; then \ 3170 echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h; \ 3171 else \ 3172 echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \ 3173 echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h; \ 3174 fi 3175 @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31 3176 3177omap2420h4_config : unconfig 3178 @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx 3179 3180qong_config : unconfig 3181 @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31 3182 3183######################################################################### 3184## ARM1176 Systems 3185######################################################################### 3186smdk6400_noUSB_config \ 3187smdk6400_config : unconfig 3188 @mkdir -p $(obj)include $(obj)board/samsung/smdk6400 3189 @mkdir -p $(obj)nand_spl/board/samsung/smdk6400 3190 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 3191 @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \ 3192 echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ 3193 $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx; \ 3194 else \ 3195 echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ 3196 $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx; \ 3197 fi 3198 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 3199 3200#======================================================================== 3201# i386 3202#======================================================================== 3203######################################################################### 3204## AMD SC520 CDP 3205######################################################################### 3206eNET_config : unconfig 3207 @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520 3208 3209sc520_cdp_config : unconfig 3210 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520 3211 3212sc520_spunk_config : unconfig 3213 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 3214 3215sc520_spunk_rel_config : unconfig 3216 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 3217 3218#======================================================================== 3219# MIPS 3220#======================================================================== 3221######################################################################### 3222## MIPS32 4Kc 3223######################################################################### 3224 3225xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1)))) 3226 3227incaip_100MHz_config \ 3228incaip_133MHz_config \ 3229incaip_150MHz_config \ 3230incaip_config: unconfig 3231 @mkdir -p $(obj)include 3232 @[ -z "$(findstring _100MHz,$@)" ] || \ 3233 { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \ 3234 $(XECHO) "... with 100MHz system clock" ; \ 3235 } 3236 @[ -z "$(findstring _133MHz,$@)" ] || \ 3237 { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \ 3238 $(XECHO) "... with 133MHz system clock" ; \ 3239 } 3240 @[ -z "$(findstring _150MHz,$@)" ] || \ 3241 { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \ 3242 $(XECHO) "... with 150MHz system clock" ; \ 3243 } 3244 @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip 3245 3246tb0229_config: unconfig 3247 @$(MKCONFIG) $(@:_config=) mips mips tb0229 3248 3249vct_premium_config \ 3250vct_premium_small_config \ 3251vct_premium_onenand_config \ 3252vct_premium_onenand_small_config \ 3253vct_platinum_config \ 3254vct_platinum_small_config \ 3255vct_platinum_onenand_config \ 3256vct_platinum_onenand_small_config \ 3257vct_platinumavc_config \ 3258vct_platinumavc_small_config \ 3259vct_platinumavc_onenand_config \ 3260vct_platinumavc_onenand_small_config: unconfig 3261 @mkdir -p $(obj)include 3262 @if [ "$(findstring _premium,$@)" ] ; then \ 3263 echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \ 3264 $(XECHO) "... on Premium board variant" ; \ 3265 fi 3266 @if [ "$(findstring _platinum_,$@)" ] ; then \ 3267 echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \ 3268 $(XECHO) "... on Platinum board variant" ; \ 3269 fi 3270 @if [ "$(findstring _platinumavc,$@)" ] ; then \ 3271 echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \ 3272 $(XECHO) "... on PlatinumAVC board variant" ; \ 3273 fi 3274 @if [ "$(findstring _onenand,$@)" ] ; then \ 3275 echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \ 3276 $(XECHO) "... on OneNAND board variant" ; \ 3277 fi 3278 @if [ "$(findstring _small,$@)" ] ; then \ 3279 echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \ 3280 $(XECHO) "... stripped down image variant" ; \ 3281 fi 3282 @$(MKCONFIG) -a vct mips mips vct micronas 3283 3284######################################################################### 3285## MIPS32 AU1X00 3286######################################################################### 3287 3288dbau1000_config : unconfig 3289 @mkdir -p $(obj)include 3290 @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h 3291 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3292 3293dbau1100_config : unconfig 3294 @mkdir -p $(obj)include 3295 @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h 3296 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3297 3298dbau1500_config : unconfig 3299 @mkdir -p $(obj)include 3300 @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h 3301 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3302 3303dbau1550_config : unconfig 3304 @mkdir -p $(obj)include 3305 @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h 3306 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3307 3308dbau1550_el_config : unconfig 3309 @mkdir -p $(obj)include 3310 @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h 3311 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3312 3313gth2_config : unconfig 3314 @mkdir -p $(obj)include 3315 @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h 3316 @$(MKCONFIG) -a gth2 mips mips gth2 3317 3318pb1000_config : unconfig 3319 @mkdir -p $(obj)include 3320 @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h 3321 @$(MKCONFIG) -a pb1x00 mips mips pb1x00 3322 3323qemu_mips_config : unconfig 3324 @mkdir -p $(obj)include 3325 @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h 3326 @$(MKCONFIG) -a qemu-mips mips mips qemu-mips 3327 3328######################################################################### 3329## MIPS64 5Kc 3330######################################################################### 3331 3332purple_config : unconfig 3333 @$(MKCONFIG) $(@:_config=) mips mips purple 3334 3335#======================================================================== 3336# Nios 3337#======================================================================== 3338######################################################################### 3339## Nios32 3340######################################################################### 3341 3342ADNPESC1_DNPEVA2_base_32_config \ 3343ADNPESC1_base_32_config \ 3344ADNPESC1_config: unconfig 3345 @mkdir -p $(obj)include 3346 @[ -z "$(findstring _DNPEVA2,$@)" ] || \ 3347 { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \ 3348 $(XECHO) "... DNP/EVA2 configuration" ; \ 3349 } 3350 @[ -z "$(findstring _base_32,$@)" ] || \ 3351 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ 3352 $(XECHO) "... NIOS 'base_32' configuration" ; \ 3353 } 3354 @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ 3355 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ 3356 $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \ 3357 } 3358 @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv 3359 3360DK1C20_safe_32_config \ 3361DK1C20_standard_32_config \ 3362DK1C20_config: unconfig 3363 @mkdir -p $(obj)include 3364 @[ -z "$(findstring _safe_32,$@)" ] || \ 3365 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ 3366 $(XECHO) "... NIOS 'safe_32' configuration" ; \ 3367 } 3368 @[ -z "$(findstring _standard_32,$@)" ] || \ 3369 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3370 $(XECHO) "... NIOS 'standard_32' configuration" ; \ 3371 } 3372 @[ -z "$(findstring DK1C20_config,$@)" ] || \ 3373 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3374 $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ 3375 } 3376 @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera 3377 3378DK1S10_safe_32_config \ 3379DK1S10_standard_32_config \ 3380DK1S10_mtx_ldk_20_config \ 3381DK1S10_config: unconfig 3382 @mkdir -p $(obj)include 3383 @[ -z "$(findstring _safe_32,$@)" ] || \ 3384 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ 3385 $(XECHO) "... NIOS 'safe_32' configuration" ; \ 3386 } 3387 @[ -z "$(findstring _standard_32,$@)" ] || \ 3388 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3389 $(XECHO) "... NIOS 'standard_32' configuration" ; \ 3390 } 3391 @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \ 3392 { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \ 3393 $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \ 3394 } 3395 @[ -z "$(findstring DK1S10_config,$@)" ] || \ 3396 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3397 $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ 3398 } 3399 @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera 3400 3401######################################################################### 3402## Nios-II 3403######################################################################### 3404 3405EP1C20_config : unconfig 3406 @$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 altera 3407 3408EP1S10_config : unconfig 3409 @$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 altera 3410 3411EP1S40_config : unconfig 3412 @$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 altera 3413 3414PK1C20_config : unconfig 3415 @$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyent 3416 3417PCI5441_config : unconfig 3418 @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent 3419 3420#======================================================================== 3421## Microblaze 3422#======================================================================== 3423 3424microblaze-generic_config: unconfig 3425 @mkdir -p $(obj)include 3426 @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx 3427 3428suzaku_config: unconfig 3429 @mkdir -p $(obj)include 3430 @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h 3431 @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno 3432 3433#======================================================================== 3434# Blackfin 3435#======================================================================== 3436 3437# Analog Devices boards 3438BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \ 3439 bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit 3440 3441# Bluetechnix tinyboards 3442BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf548 cm-bf561 tcm-bf537 3443 3444# Misc third party boards 3445BFIN_BOARDS += bf537-minotaur bf537-srv1 blackstamp 3446 3447# I-SYST Micromodule 3448BFIN_BOARDS += ibf-dsp561 3449 3450$(BFIN_BOARDS:%=%_config) : unconfig 3451 @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=) 3452 3453$(BFIN_BOARDS): 3454 $(MAKE) $@_config 3455 $(MAKE) 3456 3457#======================================================================== 3458# AVR32 3459#======================================================================== 3460 3461atngw100_config : unconfig 3462 @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x 3463 3464atstk1002_config : unconfig 3465 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3466 3467atstk1003_config : unconfig 3468 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3469 3470atstk1004_config : unconfig 3471 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3472 3473atstk1006_config : unconfig 3474 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3475 3476favr-32-ezkit_config : unconfig 3477 @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x 3478 3479hammerhead_config : unconfig 3480 @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x 3481 3482mimc200_config : unconfig 3483 @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x 3484 3485#======================================================================== 3486# SH3 (SuperH) 3487#======================================================================== 3488 3489######################################################################### 3490## sh2 (Renesas SuperH) 3491######################################################################### 3492rsk7203_config: unconfig 3493 @mkdir -p $(obj)include 3494 @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h 3495 @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas 3496 3497######################################################################### 3498## sh3 (Renesas SuperH) 3499######################################################################### 3500 3501mpr2_config: unconfig 3502 @mkdir -p $(obj)include 3503 @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h 3504 @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2 3505 3506ms7720se_config: unconfig 3507 @mkdir -p $(obj)include 3508 @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h 3509 @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se 3510 3511######################################################################### 3512## sh4 (Renesas SuperH) 3513######################################################################### 3514 3515MigoR_config : unconfig 3516 @mkdir -p $(obj)include 3517 @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h 3518 @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas 3519 3520ms7750se_config: unconfig 3521 @mkdir -p $(obj)include 3522 @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h 3523 @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se 3524 3525ms7722se_config : unconfig 3526 @mkdir -p $(obj)include 3527 @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h 3528 @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se 3529 3530r2dplus_config : unconfig 3531 @mkdir -p $(obj)include 3532 @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h 3533 @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas 3534 3535r7780mp_config: unconfig 3536 @mkdir -p $(obj)include 3537 @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h 3538 @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas 3539 3540sh7763rdp_config : unconfig 3541 @mkdir -p $(obj)include 3542 @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h 3543 @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas 3544 3545xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1)) 3546sh7785lcr_32bit_config \ 3547sh7785lcr_config : unconfig 3548 @mkdir -p $(obj)include 3549 @mkdir -p $(obj)board/renesas/sh7785lcr 3550 @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h 3551 @if [ "$(findstring 32bit, $@)" ] ; then \ 3552 echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \ 3553 echo "TEXT_BASE = 0x8ff80000" > \ 3554 $(obj)board/renesas/sh7785lcr/config.tmp ; \ 3555 $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \ 3556 fi 3557 @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas 3558 3559ap325rxa_config : unconfig 3560 @mkdir -p $(obj)include 3561 @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h 3562 @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas 3563 3564espt_config : unconfig 3565 @mkdir -p $(obj)include 3566 @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h 3567 @$(MKCONFIG) -a $(@:_config=) sh sh4 espt 3568 3569#======================================================================== 3570# SPARC 3571#======================================================================== 3572 3573######################################################################### 3574## LEON3 3575######################################################################### 3576 3577# Gaisler GR-XC3S-1500 board 3578gr_xc3s_1500_config : unconfig 3579 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler 3580 3581# Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system 3582gr_cpci_ax2000_config : unconfig 3583 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler 3584 3585# Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS 3586# Development board Stratix II edition, FPGA Device EP2S60. 3587gr_ep2s60_config: unconfig 3588 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler 3589 3590# Gaisler LEON3 GRSIM simulator 3591grsim_config : unconfig 3592 @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler 3593 3594######################################################################### 3595## LEON2 3596######################################################################### 3597 3598# Gaisler LEON2 GRSIM simulator 3599grsim_leon2_config : unconfig 3600 @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler 3601 3602######################################################################### 3603######################################################################### 3604######################################################################### 3605 3606clean: 3607 @rm -f $(obj)examples/standalone/82559_eeprom \ 3608 $(obj)examples/standalone/eepro100_eeprom \ 3609 $(obj)examples/standalone/hello_world \ 3610 $(obj)examples/standalone/interrupt \ 3611 $(obj)examples/standalone/mem_to_mem_idma2intr \ 3612 $(obj)examples/standalone/sched \ 3613 $(obj)examples/standalone/smc91111_eeprom \ 3614 $(obj)examples/standalone/test_burst \ 3615 $(obj)examples/standalone/timer 3616 @rm -f $(obj)examples/api/demo{,.bin} 3617 @rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \ 3618 $(obj)tools/env/{fw_printenv,fw_setenv} \ 3619 $(obj)tools/envcrc \ 3620 $(obj)tools/gdb/{astest,gdbcont,gdbsend} \ 3621 $(obj)tools/gen_eth_addr $(obj)tools/img2srec \ 3622 $(obj)tools/mkimage $(obj)tools/mpc86x_clk \ 3623 $(obj)tools/ncb $(obj)tools/ubsha1 3624 @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \ 3625 $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \ 3626 $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \ 3627 $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \ 3628 $(obj)lib_blackfin/u-boot.lds \ 3629 $(obj)cpu/blackfin/bootrom-asm-offsets.[chs] 3630 @rm -f $(obj)include/bmp_logo.h 3631 @rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map} 3632 @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map} 3633 @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE) 3634 @find $(OBJTREE) -type f \ 3635 \( -name 'core' -o -name '*.bak' -o -name '*~' \ 3636 -o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \ 3637 | xargs rm -f 3638 3639clobber: clean 3640 @find $(OBJTREE) -type f \( -name .depend \ 3641 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \ 3642 -print0 \ 3643 | xargs -0 rm -f 3644 @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \ 3645 $(obj)cscope.* $(obj)*.*~ 3646 @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) 3647 @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes} 3648 @rm -f $(obj)cpu/mpc824x/bedbug_603e.c 3649 @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm 3650 @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f 3651 @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f 3652 3653ifeq ($(OBJTREE),$(SRCTREE)) 3654mrproper \ 3655distclean: clobber unconfig 3656else 3657mrproper \ 3658distclean: clobber unconfig 3659 rm -rf $(obj)* 3660endif 3661 3662backup: 3663 F=`basename $(TOPDIR)` ; cd .. ; \ 3664 gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F 3665 3666######################################################################### 3667