1# 2# SPDX-License-Identifier: GPL-2.0+ 3# 4 5VERSION = 2017 6PATCHLEVEL = 09 7SUBLEVEL = 8EXTRAVERSION = 9NAME = 10 11# *DOCUMENTATION* 12# To see a list of typical targets execute "make help" 13# More info can be located in ./README 14# Comments in this file are targeted only to the developer, do not 15# expect to learn how to build the kernel reading this file. 16 17# o Do not use make's built-in rules and variables 18# (this increases performance and avoids hard-to-debug behaviour); 19# o Look for make include files relative to root of kernel src 20MAKEFLAGS += -rR --include-dir=$(CURDIR) 21 22# Avoid funny character set dependencies 23unexport LC_ALL 24LC_COLLATE=C 25LC_NUMERIC=C 26export LC_COLLATE LC_NUMERIC 27 28# Avoid interference with shell env settings 29unexport GREP_OPTIONS 30 31# We are using a recursive build, so we need to do a little thinking 32# to get the ordering right. 33# 34# Most importantly: sub-Makefiles should only ever modify files in 35# their own directory. If in some directory we have a dependency on 36# a file in another dir (which doesn't happen often, but it's often 37# unavoidable when linking the built-in.o targets which finally 38# turn into vmlinux), we will call a sub make in that other dir, and 39# after that we are sure that everything which is in that other dir 40# is now up to date. 41# 42# The only cases where we need to modify files which have global 43# effects are thus separated out and done before the recursive 44# descending is started. They are now explicitly listed as the 45# prepare rule. 46 47# Beautify output 48# --------------------------------------------------------------------------- 49# 50# Normally, we echo the whole command before executing it. By making 51# that echo $($(quiet)$(cmd)), we now have the possibility to set 52# $(quiet) to choose other forms of output instead, e.g. 53# 54# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ 55# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< 56# 57# If $(quiet) is empty, the whole command will be printed. 58# If it is set to "quiet_", only the short version will be printed. 59# If it is set to "silent_", nothing will be printed at all, since 60# the variable $(silent_cmd_cc_o_c) doesn't exist. 61# 62# A simple variant is to prefix commands with $(Q) - that's useful 63# for commands that shall be hidden in non-verbose mode. 64# 65# $(Q)ln $@ :< 66# 67# If KBUILD_VERBOSE equals 0 then the above command will be hidden. 68# If KBUILD_VERBOSE equals 1 then the above command is displayed. 69# 70# To put more focus on warnings, be less verbose as default 71# Use 'make V=1' to see the full commands 72 73ifeq ("$(origin V)", "command line") 74 KBUILD_VERBOSE = $(V) 75endif 76ifndef KBUILD_VERBOSE 77 KBUILD_VERBOSE = 0 78endif 79 80ifeq ($(KBUILD_VERBOSE),1) 81 quiet = 82 Q = 83else 84 quiet=quiet_ 85 Q = @ 86endif 87 88# If the user is running make -s (silent mode), suppress echoing of 89# commands 90 91ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 92ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) 93 quiet=silent_ 94endif 95else # make-3.8x 96ifneq ($(filter s% -s%,$(MAKEFLAGS)),) 97 quiet=silent_ 98endif 99endif 100 101export quiet Q KBUILD_VERBOSE 102 103# kbuild supports saving output files in a separate directory. 104# To locate output files in a separate directory two syntaxes are supported. 105# In both cases the working directory must be the root of the kernel src. 106# 1) O= 107# Use "make O=dir/to/store/output/files/" 108# 109# 2) Set KBUILD_OUTPUT 110# Set the environment variable KBUILD_OUTPUT to point to the directory 111# where the output files shall be placed. 112# export KBUILD_OUTPUT=dir/to/store/output/files/ 113# make 114# 115# The O= assignment takes precedence over the KBUILD_OUTPUT environment 116# variable. 117 118# KBUILD_SRC is set on invocation of make in OBJ directory 119# KBUILD_SRC is not intended to be used by the regular user (for now) 120ifeq ($(KBUILD_SRC),) 121 122# OK, Make called in directory where kernel src resides 123# Do we want to locate output files in a separate directory? 124ifeq ("$(origin O)", "command line") 125 KBUILD_OUTPUT := $(O) 126endif 127 128# That's our default target when none is given on the command line 129PHONY := _all 130_all: 131 132# Cancel implicit rules on top Makefile 133$(CURDIR)/Makefile Makefile: ; 134 135ifneq ($(KBUILD_OUTPUT),) 136# Invoke a second make in the output directory, passing relevant variables 137# check that the output directory actually exists 138saved-output := $(KBUILD_OUTPUT) 139KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \ 140 && /bin/pwd) 141$(if $(KBUILD_OUTPUT),, \ 142 $(error failed to create output directory "$(saved-output)")) 143 144PHONY += $(MAKECMDGOALS) sub-make 145 146$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make 147 @: 148 149sub-make: FORCE 150 $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \ 151 -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS)) 152 153# Leave processing to above invocation of make 154skip-makefile := 1 155endif # ifneq ($(KBUILD_OUTPUT),) 156endif # ifeq ($(KBUILD_SRC),) 157 158# We process the rest of the Makefile if this is the final invocation of make 159ifeq ($(skip-makefile),) 160 161# Do not print "Entering directory ...", 162# but we want to display it when entering to the output directory 163# so that IDEs/editors are able to understand relative filenames. 164MAKEFLAGS += --no-print-directory 165 166# Call a source code checker (by default, "sparse") as part of the 167# C compilation. 168# 169# Use 'make C=1' to enable checking of only re-compiled files. 170# Use 'make C=2' to enable checking of *all* source files, regardless 171# of whether they are re-compiled or not. 172# 173# See the file "Documentation/sparse.txt" for more details, including 174# where to get the "sparse" utility. 175 176ifeq ("$(origin C)", "command line") 177 KBUILD_CHECKSRC = $(C) 178endif 179ifndef KBUILD_CHECKSRC 180 KBUILD_CHECKSRC = 0 181endif 182 183# Use make M=dir to specify directory of external module to build 184# Old syntax make ... SUBDIRS=$PWD is still supported 185# Setting the environment variable KBUILD_EXTMOD take precedence 186ifdef SUBDIRS 187 KBUILD_EXTMOD ?= $(SUBDIRS) 188endif 189 190ifeq ("$(origin M)", "command line") 191 KBUILD_EXTMOD := $(M) 192endif 193 194# If building an external module we do not care about the all: rule 195# but instead _all depend on modules 196PHONY += all 197ifeq ($(KBUILD_EXTMOD),) 198_all: all 199else 200_all: modules 201endif 202 203ifeq ($(KBUILD_SRC),) 204 # building in the source tree 205 srctree := . 206else 207 ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR))) 208 # building in a subdirectory of the source tree 209 srctree := .. 210 else 211 srctree := $(KBUILD_SRC) 212 endif 213endif 214objtree := . 215src := $(srctree) 216obj := $(objtree) 217 218VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD)) 219 220export srctree objtree VPATH 221 222# Make sure CDPATH settings don't interfere 223unexport CDPATH 224 225######################################################################### 226 227HOSTARCH := $(shell uname -m | \ 228 sed -e s/i.86/x86/ \ 229 -e s/sun4u/sparc64/ \ 230 -e s/arm.*/arm/ \ 231 -e s/sa110/arm/ \ 232 -e s/ppc64/powerpc/ \ 233 -e s/ppc/powerpc/ \ 234 -e s/macppc/powerpc/\ 235 -e s/sh.*/sh/) 236 237HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ 238 sed -e 's/\(cygwin\).*/cygwin/') 239 240export HOSTARCH HOSTOS 241 242######################################################################### 243 244# set default to nothing for native builds 245ifeq ($(HOSTARCH),$(ARCH)) 246CROSS_COMPILE ?= 247endif 248 249KCONFIG_CONFIG ?= .config 250export KCONFIG_CONFIG 251 252# SHELL used by kbuild 253CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ 254 else if [ -x /bin/bash ]; then echo /bin/bash; \ 255 else echo sh; fi ; fi) 256 257HOSTCC = cc 258HOSTCXX = c++ 259HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \ 260 $(if $(CONFIG_TOOLS_DEBUG),-g) 261HOSTCXXFLAGS = -O2 262 263ifeq ($(HOSTOS),cygwin) 264HOSTCFLAGS += -ansi 265endif 266 267# Mac OS X / Darwin's C preprocessor is Apple specific. It 268# generates numerous errors and warnings. We want to bypass it 269# and use GNU C's cpp. To do this we pass the -traditional-cpp 270# option to the compiler. Note that the -traditional-cpp flag 271# DOES NOT have the same semantics as GNU C's flag, all it does 272# is invoke the GNU preprocessor in stock ANSI/ISO C fashion. 273# 274# Apple's linker is similar, thanks to the new 2 stage linking 275# multiple symbol definitions are treated as errors, hence the 276# -multiply_defined suppress option to turn off this error. 277# 278ifeq ($(HOSTOS),darwin) 279# get major and minor product version (e.g. '10' and '6' for Snow Leopard) 280DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.') 281DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.') 282 283os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \ 284 $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;) 285 286# Snow Leopards build environment has no longer restrictions as described above 287HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc") 288HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp") 289HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress") 290 291# since Lion (10.7) ASLR is on by default, but we use linker generated lists 292# in some host tools which is a problem then ... so disable ASLR for these 293# tools 294HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie") 295endif 296 297# Decide whether to build built-in, modular, or both. 298# Normally, just do built-in. 299 300KBUILD_MODULES := 301KBUILD_BUILTIN := 1 302 303# If we have only "make modules", don't compile built-in objects. 304# When we're building modules with modversions, we need to consider 305# the built-in objects during the descend as well, in order to 306# make sure the checksums are up to date before we record them. 307 308ifeq ($(MAKECMDGOALS),modules) 309 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) 310endif 311 312# If we have "make <whatever> modules", compile modules 313# in addition to whatever we do anyway. 314# Just "make" or "make all" shall build modules as well 315 316# U-Boot does not need modules 317#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) 318# KBUILD_MODULES := 1 319#endif 320 321#ifeq ($(MAKECMDGOALS),) 322# KBUILD_MODULES := 1 323#endif 324 325export KBUILD_MODULES KBUILD_BUILTIN 326export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD 327 328# We need some generic definitions (do not try to remake the file). 329scripts/Kbuild.include: ; 330include scripts/Kbuild.include 331 332# Make variables (CC, etc...) 333 334AS = $(CROSS_COMPILE)as 335# Always use GNU ld 336ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),) 337LD = $(CROSS_COMPILE)ld.bfd 338else 339LD = $(CROSS_COMPILE)ld 340endif 341CC = $(CROSS_COMPILE)gcc 342CPP = $(CC) -E 343AR = $(CROSS_COMPILE)ar 344NM = $(CROSS_COMPILE)nm 345LDR = $(CROSS_COMPILE)ldr 346STRIP = $(CROSS_COMPILE)strip 347OBJCOPY = $(CROSS_COMPILE)objcopy 348OBJDUMP = $(CROSS_COMPILE)objdump 349AWK = awk 350PERL = perl 351PYTHON ?= python 352DTC ?= $(objtree)/scripts/dtc/dtc 353CHECK = sparse 354 355CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ 356 -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF) 357 358KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__ 359 360KBUILD_CFLAGS := -Wall -Wstrict-prototypes \ 361 -Wno-format-security \ 362 -fno-builtin -ffreestanding 363KBUILD_CFLAGS += -fshort-wchar -Werror 364KBUILD_AFLAGS := -D__ASSEMBLY__ 365 366# Read UBOOTRELEASE from include/config/uboot.release (if it exists) 367UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null) 368UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) 369 370export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION 371export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR 372export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC 373export CPP AR NM LDR STRIP OBJCOPY OBJDUMP 374export MAKE AWK PERL PYTHON 375export HOSTCXX HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS 376 377export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS 378export KBUILD_CFLAGS KBUILD_AFLAGS 379 380# When compiling out-of-tree modules, put MODVERDIR in the module 381# tree rather than in the kernel tree. The kernel tree might 382# even be read-only. 383export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions 384 385# Files to ignore in find ... statements 386 387export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \ 388 -name CVS -o -name .pc -o -name .hg -o -name .git \) \ 389 -prune -o 390export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \ 391 --exclude CVS --exclude .pc --exclude .hg --exclude .git 392 393# =========================================================================== 394# Rules shared between *config targets and build targets 395 396# Basic helpers built in scripts/ 397PHONY += scripts_basic 398scripts_basic: 399 $(Q)$(MAKE) $(build)=scripts/basic 400 $(Q)rm -f .tmp_quiet_recordmcount 401 402# To avoid any implicit rule to kick in, define an empty command. 403scripts/basic/%: scripts_basic ; 404 405PHONY += outputmakefile 406# outputmakefile generates a Makefile in the output directory, if using a 407# separate output directory. This allows convenient use of make in the 408# output directory. 409outputmakefile: 410ifneq ($(KBUILD_SRC),) 411 $(Q)ln -fsn $(srctree) source 412 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \ 413 $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) 414endif 415 416# To make sure we do not include .config for any of the *config targets 417# catch them early, and hand them over to scripts/kconfig/Makefile 418# It is allowed to specify more targets when calling make, including 419# mixing *config targets and build targets. 420# For example 'make oldconfig all'. 421# Detect when mixed targets is specified, and make a second invocation 422# of make so .config is not included in this case either (for *config). 423 424version_h := include/generated/version_autogenerated.h 425timestamp_h := include/generated/timestamp_autogenerated.h 426 427no-dot-config-targets := clean clobber mrproper distclean \ 428 help %docs check% coccicheck \ 429 ubootversion backup tests 430 431config-targets := 0 432mixed-targets := 0 433dot-config := 1 434 435ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) 436 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) 437 dot-config := 0 438 endif 439endif 440 441ifeq ($(KBUILD_EXTMOD),) 442 ifneq ($(filter config %config,$(MAKECMDGOALS)),) 443 config-targets := 1 444 ifneq ($(words $(MAKECMDGOALS)),1) 445 mixed-targets := 1 446 endif 447 endif 448endif 449 450ifeq ($(mixed-targets),1) 451# =========================================================================== 452# We're called with mixed targets (*config and build targets). 453# Handle them one by one. 454 455PHONY += $(MAKECMDGOALS) __build_one_by_one 456 457$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one 458 @: 459 460__build_one_by_one: 461 $(Q)set -e; \ 462 for i in $(MAKECMDGOALS); do \ 463 $(MAKE) -f $(srctree)/Makefile $$i; \ 464 done 465 466else 467ifeq ($(config-targets),1) 468# =========================================================================== 469# *config targets only - make sure prerequisites are updated, and descend 470# in scripts/kconfig to make the *config target 471 472KBUILD_DEFCONFIG := sandbox_defconfig 473export KBUILD_DEFCONFIG KBUILD_KCONFIG 474 475config: scripts_basic outputmakefile FORCE 476 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 477 478%config: scripts_basic outputmakefile FORCE 479 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 480 481else 482# =========================================================================== 483# Build targets only - this includes vmlinux, arch specific targets, clean 484# targets and others. In general all targets except *config targets. 485 486# Additional helpers built in scripts/ 487# Carefully list dependencies so we do not try to build scripts twice 488# in parallel 489PHONY += scripts 490scripts: scripts_basic include/config/auto.conf 491 $(Q)$(MAKE) $(build)=$(@) 492 493ifeq ($(dot-config),1) 494# Read in config 495-include include/config/auto.conf 496 497# Read in dependencies to all Kconfig* files, make sure to run 498# oldconfig if changes are detected. 499-include include/config/auto.conf.cmd 500 501# To avoid any implicit rule to kick in, define an empty command 502$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; 503 504# If .config is newer than include/config/auto.conf, someone tinkered 505# with it and forgot to run make oldconfig. 506# if auto.conf.cmd is missing then we are probably in a cleaned tree so 507# we execute the config step to be sure to catch updated Kconfig files 508include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd 509 $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig 510 @# If the following part fails, include/config/auto.conf should be 511 @# deleted so "make silentoldconfig" will be re-run on the next build. 512 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \ 513 { rm -f include/config/auto.conf; false; } 514 @# include/config.h has been updated after "make silentoldconfig". 515 @# We need to touch include/config/auto.conf so it gets newer 516 @# than include/config.h. 517 @# Otherwise, 'make silentoldconfig' would be invoked twice. 518 $(Q)touch include/config/auto.conf 519 520u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg: include/config.h FORCE 521 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@) 522 523-include include/autoconf.mk 524-include include/autoconf.mk.dep 525 526# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf 527# is up-to-date. When we switch to a different board configuration, old CONFIG 528# macros are still remaining in include/config/auto.conf. Without the following 529# gimmick, wrong config.mk would be included leading nasty warnings/errors. 530ifneq ($(wildcard $(KCONFIG_CONFIG)),) 531ifneq ($(wildcard include/config/auto.conf),) 532autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \ 533 include/config/auto.conf) 534ifeq ($(autoconf_is_old),) 535include config.mk 536include arch/$(ARCH)/Makefile 537endif 538endif 539endif 540 541# These are set by the arch-specific config.mk. Make sure they are exported 542# so they can be used when building an EFI application. 543export EFI_LDS # Filename of EFI link script in arch/$(ARCH)/lib 544export EFI_CRT0 # Filename of EFI CRT0 in arch/$(ARCH)/lib 545export EFI_RELOC # Filename of EFU relocation code in arch/$(ARCH)/lib 546export CFLAGS_EFI # Compiler flags to add when building EFI app 547export CFLAGS_NON_EFI # Compiler flags to remove when building EFI app 548export EFI_TARGET # binutils target if EFI is natively supported 549 550# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use 551# that (or fail if absent). Otherwise, search for a linker script in a 552# standard location. 553 554ifndef LDSCRIPT 555 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug 556 ifdef CONFIG_SYS_LDSCRIPT 557 # need to strip off double quotes 558 LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%) 559 endif 560endif 561 562# If there is no specified link script, we look in a number of places for it 563ifndef LDSCRIPT 564 ifeq ($(wildcard $(LDSCRIPT)),) 565 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds 566 endif 567 ifeq ($(wildcard $(LDSCRIPT)),) 568 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds 569 endif 570 ifeq ($(wildcard $(LDSCRIPT)),) 571 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds 572 endif 573endif 574 575else 576# Dummy target needed, because used as prerequisite 577include/config/auto.conf: ; 578endif # $(dot-config) 579 580# 581# Xtensa linker script cannot be preprocessed with -ansi because of 582# preprocessor operations on strings that don't make C identifiers. 583# 584ifeq ($(CONFIG_XTENSA),) 585LDPPFLAGS += -ansi 586endif 587 588ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE 589KBUILD_CFLAGS += -Os 590else 591KBUILD_CFLAGS += -O2 592endif 593 594KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector) 595KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks) 596 597KBUILD_CFLAGS += -g 598# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format> 599# option to the assembler. 600KBUILD_AFLAGS += -g 601 602# Report stack usage if supported 603ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y) 604 KBUILD_CFLAGS += -fstack-usage 605endif 606 607KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral) 608 609# turn jbsr into jsr for m68k 610ifeq ($(ARCH),m68k) 611ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4) 612KBUILD_AFLAGS += -Wa,-gstabs,-S 613endif 614endif 615 616# Prohibit date/time macros, which would make the build non-deterministic 617KBUILD_CFLAGS += $(call cc-option,-Werror=date-time) 618 619include scripts/Makefile.extrawarn 620 621# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments 622KBUILD_CPPFLAGS += $(KCPPFLAGS) 623KBUILD_AFLAGS += $(KAFLAGS) 624KBUILD_CFLAGS += $(KCFLAGS) 625 626# Use UBOOTINCLUDE when you must reference the include/ directory. 627# Needed to be compatible with the O= option 628UBOOTINCLUDE := \ 629 -Iinclude \ 630 $(if $(KBUILD_SRC), -I$(srctree)/include) \ 631 $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \ 632 $(if $(CONFIG_HAS_THUMB2),, \ 633 -I$(srctree)/arch/$(ARCH)/thumb1/include),) \ 634 -I$(srctree)/arch/$(ARCH)/include \ 635 -include $(srctree)/include/linux/kconfig.h 636 637NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) 638CHECKFLAGS += $(NOSTDINC_FLAGS) 639 640# FIX ME 641cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \ 642 $(NOSTDINC_FLAGS) 643c_flags := $(KBUILD_CFLAGS) $(cpp_flags) 644 645######################################################################### 646# U-Boot objects....order is important (i.e. start must be first) 647 648HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n) 649 650libs-y += lib/ 651libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ 652libs-$(CONFIG_OF_EMBED) += dts/ 653libs-y += fs/ 654libs-y += net/ 655libs-y += disk/ 656libs-y += drivers/ 657libs-y += drivers/cpu/ 658libs-y += drivers/dma/ 659libs-y += drivers/gpio/ 660libs-y += drivers/i2c/ 661libs-y += drivers/mtd/ 662libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/raw/ 663libs-y += drivers/mtd/onenand/ 664libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/ 665libs-y += drivers/mtd/spi/ 666libs-y += drivers/net/ 667libs-y += drivers/net/phy/ 668libs-y += drivers/pci/ 669libs-y += drivers/power/ \ 670 drivers/power/domain/ \ 671 drivers/power/fuel_gauge/ \ 672 drivers/power/mfd/ \ 673 drivers/power/pmic/ \ 674 drivers/power/battery/ \ 675 drivers/power/regulator/ \ 676 drivers/power/dvfs/ \ 677 drivers/power/io-domain/ \ 678 drivers/power/charge/ 679libs-y += drivers/spi/ 680libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/ 681libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/ 682libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/ 683libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/ 684libs-y += drivers/serial/ 685libs-y += drivers/usb/cdns3/ 686libs-y += drivers/usb/dwc3/ 687libs-y += drivers/usb/common/ 688libs-y += drivers/usb/emul/ 689libs-y += drivers/usb/eth/ 690libs-y += drivers/usb/gadget/ 691libs-y += drivers/usb/gadget/udc/ 692libs-y += drivers/usb/host/ 693libs-y += drivers/usb/musb/ 694libs-y += drivers/usb/musb-new/ 695libs-y += drivers/usb/phy/ 696libs-y += drivers/usb/ulpi/ 697libs-y += cmd/ 698libs-y += common/ 699libs-y += env/ 700libs-$(CONFIG_API) += api/ 701libs-$(CONFIG_HAS_POST) += post/ 702libs-y += test/ 703libs-y += test/dm/ 704libs-$(CONFIG_UT_ENV) += test/env/ 705libs-$(CONFIG_UT_OVERLAY) += test/overlay/ 706 707libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/) 708 709libs-y := $(sort $(libs-y)) 710 711u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples 712 713u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-)))) 714 715libs-y := $(patsubst %/, %/built-in.o, $(libs-y)) 716 717u-boot-init := $(head-y) 718u-boot-main := $(libs-y) 719 720 721# Add GCC lib 722ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y) 723PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a 724else 725PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc 726endif 727PLATFORM_LIBS += $(PLATFORM_LIBGCC) 728export PLATFORM_LIBS 729export PLATFORM_LIBGCC 730 731# Special flags for CPP when processing the linker script. 732# Pass the version down so we can handle backwards compatibility 733# on the fly. 734LDPPFLAGS += \ 735 -include $(srctree)/include/u-boot/u-boot.lds.h \ 736 -DCPUDIR=$(CPUDIR) \ 737 $(shell $(LD) --version | \ 738 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') 739 740######################################################################### 741######################################################################### 742 743ifneq ($(CONFIG_BOARD_SIZE_LIMIT),) 744BOARD_SIZE_CHECK = \ 745 @actual=`wc -c $@ | awk '{print $$1}'`; \ 746 limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \ 747 if test $$actual -gt $$limit; then \ 748 echo "$@ exceeds file size limit:" >&2 ; \ 749 echo " limit: $$limit bytes" >&2 ; \ 750 echo " actual: $$actual bytes" >&2 ; \ 751 echo " excess: $$((actual - limit)) bytes" >&2; \ 752 exit 1; \ 753 fi 754else 755BOARD_SIZE_CHECK = 756endif 757 758# Statically apply RELA-style relocations (currently arm64 only) 759# This is useful for arm64 where static relocation needs to be performed on 760# the raw binary, but certain simulators only accept an ELF file (but don't 761# do the relocation). 762ifneq ($(CONFIG_STATIC_RELA),) 763# $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base 764DO_STATIC_RELA = \ 765 start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \ 766 end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \ 767 tools/relocate-rela $(2) $(3) $$start $$end 768else 769DO_STATIC_RELA = 770endif 771 772# Always append ALL so that arch config.mk's can add custom ones 773ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check 774ALL-$(CONFIG_SUPPORT_USBPLUG) += usbplug.bin 775 776ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin 777ifeq ($(CONFIG_SPL_FSL_PBL),y) 778ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin 779else 780ifneq ($(CONFIG_SECURE_BOOT), y) 781# For Secure Boot The Image needs to be signed and Header must also 782# be included. So The image has to be built explicitly 783ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl 784endif 785endif 786ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin 787ifeq ($(CONFIG_MX6)$(CONFIG_SECURE_BOOT), yy) 788ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img 789else 790ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img 791endif 792ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin 793ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb 794ifeq ($(CONFIG_SPL_FRAMEWORK),y) 795ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img 796endif 797ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb 798ifneq ($(CONFIG_SPL_TARGET),) 799ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%) 800endif 801ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf 802ALL-$(CONFIG_EFI_APP) += u-boot-app.efi 803ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi 804 805ifneq ($(BUILD_ROM),) 806ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom 807endif 808 809# enable combined SPL/u-boot/dtb rules for tegra 810ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy) 811ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin 812ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin 813endif 814 815# Add optional build target if defined in board/cpu/soc headers 816ifneq ($(CONFIG_BUILD_TARGET),) 817ALL-y += $(CONFIG_BUILD_TARGET:"%"=%) 818endif 819 820LDFLAGS_u-boot += $(LDFLAGS_FINAL) 821 822# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards. 823LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker) 824 825ifneq ($(CONFIG_SYS_TEXT_BASE),) 826LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE) 827endif 828 829# Normally we fill empty space with 0xff 830quiet_cmd_objcopy = OBJCOPY $@ 831cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \ 832 $(OBJCOPYFLAGS_$(@F)) $< $@ 833 834# Provide a version which does not do this, for use by EFI 835quiet_cmd_zobjcopy = OBJCOPY $@ 836cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ 837 838quiet_cmd_efipayload = OBJCOPY $@ 839cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@ 840 841MKIMAGEOUTPUT ?= /dev/null 842 843quiet_cmd_mkimage = MKIMAGE $@ 844cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \ 845 $(if $(KBUILD_VERBOSE:1=), >$(MKIMAGEOUTPUT)) 846 847quiet_cmd_mkfitimage = MKIMAGE $@ 848cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E $@ \ 849 $(if $(KBUILD_VERBOSE:1=), >$(MKIMAGEOUTPUT)) 850 851quiet_cmd_cat = CAT $@ 852cmd_cat = cat $(filter-out $(PHONY), $^) > $@ 853 854append = cat $(filter-out $< $(PHONY), $^) >> $@ 855 856quiet_cmd_pad_cat = CAT $@ 857cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ 858 859cfg: u-boot.cfg 860 861quiet_cmd_cfgcheck = CFGCHK $2 862cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \ 863 $(srctree)/scripts/config_whitelist.txt $(srctree) 864 865all: $(ALL-y) cfg 866ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y) 867 @echo "===================== WARNING ======================" 868 @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove" 869 @echo "(possibly in a subsequent patch in your series)" 870 @echo "before sending patches to the mailing list." 871 @echo "====================================================" 872endif 873 @# Check that this build does not use CONFIG options that we do not 874 @# know about unless they are in Kconfig. All the existing CONFIG 875 @# options are whitelisted, so new ones should not be added. 876 $(call cmd,cfgcheck,u-boot.cfg) 877 878PHONY += dtbs 879dtbs: dts/dt.dtb 880 @: 881dts/dt.dtb: u-boot 882 $(Q)$(MAKE) $(build)=dts dtbs 883 884quiet_cmd_copy = COPY $@ 885 cmd_copy = cp $< $@ 886 887quiet_cmd_truncate = ALIGN $@ 888 cmd_truncate = truncate -s "%8" $@ 889 890ifeq ($(CONFIG_MULTI_DTB_FIT),y) 891 892fit-dtb.blob: dts/dt.dtb FORCE 893 $(call if_changed,mkimage) 894 895MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ 896 -a 0 -e 0 -E \ 897 $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null 898 899u-boot-fit-dtb.bin: u-boot-nodtb.bin fit-dtb.blob 900 $(call if_changed,cat) 901 902u-boot.bin: u-boot-fit-dtb.bin FORCE 903 $(call if_changed,copy) 904else ifeq ($(CONFIG_OF_SEPARATE),y) 905 906u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE 907 $(call if_changed,cat) 908 909EMBEDED_KERN_DTB := $(CONFIG_EMBEDED_KERNEL_DTB_PATH:"%"=%) 910ifneq ($(wildcard $(EMBEDED_KERN_DTB)),) 911u-boot-dtb-kern.bin: u-boot-dtb.bin FORCE 912 $(call if_changed,copy) 913 $(call if_changed,truncate) 914u-boot.bin: u-boot-dtb-kern.bin $(EMBEDED_KERN_DTB) FORCE 915 $(call if_changed,cat) 916else 917u-boot.bin: u-boot-dtb.bin FORCE 918 $(call if_changed,copy) 919 $(call if_changed,truncate) 920endif 921 922else 923u-boot.bin: u-boot-nodtb.bin FORCE 924 $(call if_changed,copy) 925endif 926 927ifeq ($(CONFIG_SUPPORT_USBPLUG),y) 928usbplug.bin: u-boot.bin 929 $(call if_changed,copy) 930endif 931 932%.imx: %.bin 933 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@ 934 935%.vyb: %.imx 936 $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@ 937 938quiet_cmd_copy = COPY $@ 939 cmd_copy = cp $< $@ 940 941u-boot.dtb: dts/dt.dtb FORCE 942 $(call cmd,copy) 943 944OBJCOPYFLAGS_u-boot.hex := -O ihex 945 946OBJCOPYFLAGS_u-boot.srec := -O srec 947 948u-boot.hex u-boot.srec: u-boot FORCE 949 $(call if_changed,objcopy) 950 951OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \ 952 $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) 953 954binary_size_check: u-boot-nodtb.bin FORCE 955 @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \ 956 map_size=$(shell cat u-boot.map | \ 957 awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \ 958 | sed 's/0X//g' \ 959 | bc); \ 960 if [ "" != "$$map_size" ]; then \ 961 if test $$map_size -ne $$file_size; then \ 962 echo "u-boot.map shows a binary size of $$map_size" >&2 ; \ 963 echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \ 964 exit 1; \ 965 fi \ 966 fi 967 968u-boot-nodtb.bin: u-boot FORCE 969 $(call if_changed,objcopy) 970 $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE)) 971 $(BOARD_SIZE_CHECK) 972 973u-boot.ldr: u-boot 974 $(CREATE_LDR_ENV) 975 $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS) 976 $(BOARD_SIZE_CHECK) 977 978# binman 979# --------------------------------------------------------------------------- 980quiet_cmd_binman = BINMAN $@ 981cmd_binman = $(srctree)/tools/binman/binman -d u-boot.dtb -O . \ 982 -I . -I $(srctree)/board/$(BOARDDIR) $< 983 984OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex 985 986OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec 987 988u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE 989 $(call if_changed,objcopy) 990 991# 992# U-Boot entry point, needed for booting of full-blown U-Boot 993# from the SPL U-Boot version. 994# 995ifndef CONFIG_SYS_UBOOT_START 996CONFIG_SYS_UBOOT_START := 0 997endif 998 999# Create a file containing the configuration options the image was built with 1000quiet_cmd_cpp_cfg = CFG $@ 1001cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ 1002 -DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $< 1003 1004# Boards with more complex image requirments can provide an .its source file 1005# or a generator script 1006ifneq ($(CONFIG_SPL_FIT_SOURCE),"") 1007U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE)) 1008else 1009ifneq ($(CONFIG_SPL_FIT_GENERATOR),"") 1010U_BOOT_ITS := u-boot.its 1011$(U_BOOT_ITS): FORCE 1012 $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \ 1013 $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@ 1014endif 1015endif 1016 1017ifdef CONFIG_SPL_LOAD_FIT 1018MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ 1019 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ 1020 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \ 1021 $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) 1022else 1023MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \ 1024 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ 1025 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" 1026MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \ 1027 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ 1028 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" 1029u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log 1030CLEAN_FILES += u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log 1031endif 1032 1033MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img) 1034 1035MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \ 1036 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) 1037 1038MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \ 1039 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \ 1040 $(if $(KEYDIR),-k $(KEYDIR)) 1041 1042MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ 1043 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage 1044 1045u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \ 1046 $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE 1047 $(call if_changed,mkimage) 1048 1049u-boot.itb: u-boot-nodtb.bin dts/dt.dtb $(U_BOOT_ITS) FORCE 1050 $(call if_changed,mkfitimage) 1051 1052u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE 1053 $(call if_changed,mkimage) 1054 1055u-boot.sha1: u-boot.bin 1056 tools/ubsha1 u-boot.bin 1057 1058u-boot.dis: u-boot 1059 $(OBJDUMP) -d $< > $@ 1060 1061ifdef CONFIG_TPL 1062SPL_PAYLOAD := tpl/u-boot-with-tpl.bin 1063else 1064SPL_PAYLOAD := u-boot.bin 1065endif 1066 1067OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ 1068 --pad-to=$(CONFIG_SPL_PAD_TO) 1069u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE 1070 $(call if_changed,pad_cat) 1071 1072MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE) 1073 1074lpc32xx-spl.img: spl/u-boot-spl.bin FORCE 1075 $(call if_changed,mkimage) 1076 1077OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) 1078 1079lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE 1080 $(call if_changed,objcopy) 1081 1082OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) 1083 1084lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE 1085 $(call if_changed,objcopy) 1086 1087lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE 1088 $(call if_changed,cat) 1089 1090CLEAN_FILES += lpc32xx-* 1091 1092OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \ 1093 --pad-to=$(CONFIG_TPL_PAD_TO) 1094tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE 1095 $(call if_changed,pad_cat) 1096 1097SPL: spl/u-boot-spl.bin FORCE 1098 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@ 1099 1100u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE 1101 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@ 1102 1103MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE) 1104 1105u-boot.ubl: u-boot-with-spl.bin FORCE 1106 $(call if_changed,mkimage) 1107 1108MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \ 1109 $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \ 1110 -T aisimage -e $(CONFIG_SPL_TEXT_BASE) 1111spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE 1112 $(call if_changed,mkimage) 1113 1114OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) 1115u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE 1116 $(call if_changed,pad_cat) 1117 1118u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin 1119 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb 1120u-boot.sb: u-boot.bin spl/u-boot-spl.bin 1121 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb 1122 1123# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL. 1124# Both images are created using mkimage (crc etc), so that the ROM 1125# bootloader can check its integrity. Padding needs to be done to the 1126# SPL image (with mkimage header) and not the binary. Otherwise the resulting image 1127# which is loaded/copied by the ROM bootloader to SRAM doesn't fit. 1128# The resulting image containing both U-Boot images is called u-boot.spr 1129MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \ 1130 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER 1131spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE 1132 $(call if_changed,mkimage) 1133 1134OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ 1135 --gap-fill=0xff 1136u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE 1137 $(call if_changed,pad_cat) 1138 1139ifneq ($(CONFIG_ARCH_SOCFPGA),) 1140quiet_cmd_socboot = SOCBOOT $@ 1141cmd_socboot = cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \ 1142 spl/u-boot-spl.sfp spl/u-boot-spl.sfp \ 1143 u-boot.img > $@ || rm -f $@ 1144u-boot-with-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE 1145 $(call if_changed,socboot) 1146endif 1147 1148# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including 1149# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in 1150# the middle. This is handled by binman based on an image description in the 1151# board's device tree. 1152ifneq ($(CONFIG_X86_RESET_VECTOR),) 1153rom: u-boot.rom FORCE 1154 1155refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE 1156 $(call if_changed,copy) 1157 1158quiet_cmd_ldr = LD $@ 1159cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \ 1160 $(filter-out FORCE,$^) -o $@ 1161 1162u-boot.rom: u-boot-x86-16bit.bin u-boot.bin \ 1163 $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \ 1164 $(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE 1165 $(call if_changed,binman) 1166 1167OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec 1168u-boot-x86-16bit.bin: u-boot FORCE 1169 $(call if_changed,objcopy) 1170endif 1171 1172ifneq ($(CONFIG_ARCH_SUNXI),) 1173u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE 1174 $(call if_changed,binman) 1175endif 1176 1177ifneq ($(CONFIG_TEGRA),) 1178OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE) 1179u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE 1180 $(call if_changed,pad_cat) 1181 1182OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE) 1183u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE 1184 $(call if_changed,pad_cat) 1185 1186u-boot-dtb-tegra.bin: u-boot-tegra.bin FORCE 1187 $(call if_changed,copy) 1188endif 1189 1190OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI) 1191u-boot-app.efi: u-boot FORCE 1192 $(call if_changed,zobjcopy) 1193 1194u-boot.bin.o: u-boot.bin FORCE 1195 $(call if_changed,efipayload) 1196 1197u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE 1198 $(call if_changed_dep,cpp_lds) 1199 1200# Rule to link the EFI payload which contains a stub and a U-Boot binary 1201quiet_cmd_u-boot_payload ?= LD $@ 1202 cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \ 1203 -T u-boot-payload.lds arch/x86/cpu/call32.o \ 1204 lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \ 1205 $(addprefix arch/$(ARCH)/lib/,$(EFISTUB)) 1206 1207u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE 1208 $(call if_changed,u-boot_payload) 1209 1210OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI) 1211u-boot-payload.efi: u-boot-payload FORCE 1212 $(call if_changed,zobjcopy) 1213 1214u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE 1215 $(call if_changed,cat) 1216 1217#Add a target to create boot binary having SPL binary in PBI format 1218#concatenated with u-boot binary. It is need by PowerPC SoC having 1219#internal SRAM <= 512KB. 1220MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ 1221 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \ 1222 -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE) 1223 1224spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE 1225 $(call if_changed,mkimage) 1226 1227ifeq ($(ARCH),arm) 1228UBOOT_BINLOAD := u-boot.img 1229else 1230UBOOT_BINLOAD := u-boot.bin 1231endif 1232 1233OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ 1234 --gap-fill=0xff 1235 1236u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE 1237 $(call if_changed,pad_cat) 1238 1239# PPC4xx needs the SPL at the end of the image, since the reset vector 1240# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target 1241# and need to introduce a new build target with the full blown U-Boot 1242# at the start padded up to the start of the SPL image. And then concat 1243# the SPL image to the end. 1244 1245OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \ 1246 --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff 1247u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE 1248 $(call if_changed,pad_cat) 1249 1250# Create a new ELF from a raw binary file. 1251ifndef PLATFORM_ELFENTRY 1252 PLATFORM_ELFENTRY = "_start" 1253endif 1254quiet_cmd_u-boot-elf ?= LD $@ 1255 cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \ 1256 --defsym=$(PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \ 1257 -Ttext=$(CONFIG_SYS_TEXT_BASE) 1258u-boot.elf: u-boot.bin 1259 $(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o 1260 $(call if_changed,u-boot-elf) 1261 1262ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink) 1263 1264# Rule to link u-boot 1265# May be overridden by arch/$(ARCH)/config.mk 1266quiet_cmd_u-boot__ ?= LD $@ 1267 cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \ 1268 -T u-boot.lds $(u-boot-init) \ 1269 --start-group $(u-boot-main) --end-group \ 1270 $(PLATFORM_LIBS) -Map u-boot.map; \ 1271 $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true) 1272 1273quiet_cmd_smap = GEN common/system_map.o 1274cmd_smap = \ 1275 smap=`$(call SYSTEM_MAP,u-boot) | \ 1276 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ 1277 $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \ 1278 -c $(srctree)/common/system_map.c -o common/system_map.o 1279 1280u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds FORCE 1281 +$(call if_changed,u-boot__) 1282ifeq ($(CONFIG_KALLSYMS),y) 1283 $(call cmd,smap) 1284 $(call cmd,u-boot__) common/system_map.o 1285endif 1286 1287quiet_cmd_sym ?= SYM $@ 1288 cmd_sym ?= $(OBJDUMP) -t $< > $@ 1289u-boot.sym: u-boot FORCE 1290 $(call if_changed,sym) 1291 1292# The actual objects are generated when descending, 1293# make sure no implicit rule kicks in 1294$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ; 1295 1296# Handle descending into subdirectories listed in $(vmlinux-dirs) 1297# Preset locale variables to speed up the build process. Limit locale 1298# tweaks to this spot to avoid wrong language settings when running 1299# make menuconfig etc. 1300# Error messages still appears in the original language 1301 1302PHONY += $(u-boot-dirs) 1303$(u-boot-dirs): prepare scripts 1304 $(Q)$(MAKE) $(build)=$@ 1305 1306tools: prepare 1307# The "tools" are needed early 1308$(filter-out tools, $(u-boot-dirs)): tools 1309# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC 1310# is "yes"), so compile examples after U-Boot is compiled. 1311examples: $(filter-out examples, $(u-boot-dirs)) 1312 1313define filechk_uboot.release 1314 echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" 1315endef 1316 1317# Store (new) UBOOTRELEASE string in include/config/uboot.release 1318include/config/uboot.release: include/config/auto.conf FORCE 1319 $(call filechk,uboot.release) 1320 1321 1322# Things we need to do before we recursively start building the kernel 1323# or the modules are listed in "prepare". 1324# A multi level approach is used. prepareN is processed before prepareN-1. 1325# archprepare is used in arch Makefiles and when processed asm symlink, 1326# version.h and scripts_basic is processed / created. 1327 1328# Listed in dependency order 1329PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3 1330 1331# prepare3 is used to check if we are building in a separate output directory, 1332# and if so do: 1333# 1) Check that make has not been executed in the kernel src $(srctree) 1334prepare3: include/config/uboot.release 1335ifneq ($(KBUILD_SRC),) 1336 @$(kecho) ' Using $(srctree) as source for U-Boot' 1337 $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \ 1338 echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \ 1339 echo >&2 " in the '$(srctree)' directory.";\ 1340 /bin/false; \ 1341 fi; 1342endif 1343 1344# prepare2 creates a makefile if using a separate output directory 1345prepare2: prepare3 outputmakefile 1346 1347prepare1: prepare2 $(version_h) $(timestamp_h) \ 1348 include/config/auto.conf 1349ifeq ($(wildcard $(LDSCRIPT)),) 1350 @echo >&2 " Could not find linker script." 1351 @/bin/false 1352endif 1353 1354archprepare: prepare1 scripts_basic 1355 1356prepare0: archprepare FORCE 1357 $(Q)$(MAKE) $(build)=. 1358 1359# All the preparing.. 1360prepare: prepare0 1361 1362# Generate some files 1363# --------------------------------------------------------------------------- 1364 1365ifeq ($(CONFIG_SUPPORT_USBPLUG),) 1366define filechk_version.h 1367 (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \ 1368 echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \ 1369 echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \ 1370 echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; ) 1371endef 1372else 1373define filechk_version.h 1374 (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \ 1375 echo \#define U_BOOT_VERSION \"USB-PLUG \" PLAIN_VERSION; \ 1376 echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \ 1377 echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; ) 1378endef 1379endif 1380 1381# The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date. 1382# The BSD date on the other hand behaves different and would produce errors 1383# with the misused '-d' switch. Respect that and search a working date with 1384# well known pre- and suffixes for the GNU variant of date. 1385define filechk_timestamp.h 1386 (if test -n "$${SOURCE_DATE_EPOCH}"; then \ 1387 SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \ 1388 DATE=""; \ 1389 for date in gdate date.gnu date; do \ 1390 $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \ 1391 done; \ 1392 if test -n "$${DATE}"; then \ 1393 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \ 1394 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \ 1395 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \ 1396 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \ 1397 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \ 1398 else \ 1399 return 42; \ 1400 fi; \ 1401 else \ 1402 LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \ 1403 LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \ 1404 LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \ 1405 LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \ 1406 LC_ALL=C date +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \ 1407 fi) 1408endef 1409 1410$(version_h): include/config/uboot.release FORCE 1411 $(call filechk,version.h) 1412 1413$(timestamp_h): $(srctree)/Makefile FORCE 1414 $(call filechk,timestamp.h) 1415 1416# --------------------------------------------------------------------------- 1417quiet_cmd_cpp_lds = LDS $@ 1418cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \ 1419 -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $< 1420 1421u-boot.lds: $(LDSCRIPT) prepare FORCE 1422 $(call if_changed_dep,cpp_lds) 1423 1424spl/u-boot-spl.bin: spl/u-boot-spl 1425 @: 1426spl/u-boot-spl: tools prepare \ 1427 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \ 1428 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb) 1429 $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all 1430 1431spl/sunxi-spl.bin: spl/u-boot-spl 1432 @: 1433 1434spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin 1435 @: 1436 1437spl/u-boot-spl.sfp: spl/u-boot-spl 1438 @: 1439 1440spl/boot.bin: spl/u-boot-spl 1441 @: 1442 1443tpl/u-boot-tpl.bin: tools prepare \ 1444 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) 1445 $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all 1446 1447TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include) 1448 1449FIND := find 1450FINDFLAGS := -L 1451 1452tags ctags: 1453 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ 1454 -name '*.[chS]' -print` 1455 ln -s ctags tags 1456 1457etags: 1458 etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ 1459 -name '*.[chS]' -print` 1460cscope: 1461 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \ 1462 cscope.files 1463 cscope -b -q -k 1464 1465SYSTEM_MAP = \ 1466 $(NM) $1 | \ 1467 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ 1468 LC_ALL=C sort 1469System.map: u-boot 1470 @$(call SYSTEM_MAP,$<) > $@ 1471 1472######################################################################### 1473 1474# ARM relocations should all be R_ARM_RELATIVE (32-bit) or 1475# R_AARCH64_RELATIVE (64-bit). 1476checkarmreloc: u-boot 1477 @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \ 1478 grep R_A | sort -u`"; \ 1479 if test "$$RELOC" != "R_ARM_RELATIVE" -a \ 1480 "$$RELOC" != "R_AARCH64_RELATIVE"; then \ 1481 echo "$< contains unexpected relocations: $$RELOC"; \ 1482 false; \ 1483 fi 1484 1485envtools: scripts_basic 1486 $(Q)$(MAKE) $(build)=tools/env 1487 1488tools-only: scripts_basic $(version_h) $(timestamp_h) 1489 $(Q)$(MAKE) $(build)=tools 1490 1491tools-all: export HOST_TOOLS_ALL=y 1492tools-all: envtools tools ; 1493 1494cross_tools: export CROSS_BUILD_TOOLS=y 1495cross_tools: tools ; 1496 1497.PHONY : CHANGELOG 1498CHANGELOG: 1499 git log --no-merges U-Boot-1_1_5.. | \ 1500 unexpand -a | sed -e 's/\s\s*$$//' > $@ 1501 1502######################################################################### 1503 1504### 1505# Cleaning is done on three levels. 1506# make clean Delete most generated files 1507# Leave enough to build external modules 1508# make mrproper Delete the current configuration, and all generated files 1509# make distclean Remove editor backup files, patch leftover files and the like 1510 1511# Directories & files removed with 'make clean' 1512CLEAN_DIRS += $(MODVERDIR) \ 1513 $(foreach d, spl tpl, $(patsubst %,$d/%, \ 1514 $(filter-out include, $(shell ls -1 $d 2>/dev/null)))) 1515 1516CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \ 1517 boot* u-boot* MLO* SPL System.map fit-dtb.blob *.bin *.img 1518 1519# Directories & files removed with 'make mrproper' 1520MRPROPER_DIRS += include/config include/generated spl tpl \ 1521 .tmp_objdiff 1522MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \ 1523 ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS 1524 1525# clean - Delete most, but leave enough to build external modules 1526# 1527clean: rm-dirs := $(CLEAN_DIRS) 1528clean: rm-files := $(CLEAN_FILES) 1529 1530clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f)) 1531 1532clean-dirs := $(addprefix _clean_, $(clean-dirs) doc/DocBook) 1533 1534PHONY += $(clean-dirs) clean archclean 1535$(clean-dirs): 1536 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) 1537 1538# TODO: Do not use *.cfgtmp 1539clean: $(clean-dirs) 1540 $(call cmd,rmdirs) 1541 $(call cmd,rmfiles) 1542 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ 1543 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ 1544 -o -name '*.ko.*' -o -name '*.su' -o -name '*.cfgtmp' \ 1545 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ 1546 -o -name '*.symtypes' -o -name 'modules.order' \ 1547 -o -name modules.builtin -o -name '.tmp_*.o.*' \ 1548 -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \ 1549 -o -name '*.gcno' \) -type f -print | xargs rm -f 1550 1551# mrproper - Delete all generated files, including .config 1552# 1553mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS)) 1554mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) 1555mrproper-dirs := $(addprefix _mrproper_,scripts) 1556 1557PHONY += $(mrproper-dirs) mrproper archmrproper 1558$(mrproper-dirs): 1559 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) 1560 1561mrproper: clean $(mrproper-dirs) 1562 $(call cmd,rmdirs) 1563 $(call cmd,rmfiles) 1564 @rm -f arch/*/include/asm/arch 1565 1566# distclean 1567# 1568PHONY += distclean 1569 1570distclean: mrproper 1571 @find $(srctree) $(RCS_FIND_IGNORE) \ 1572 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ 1573 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \ 1574 -o -name '.*.rej' -o -name '*%' -o -name 'core' \ 1575 -o -name '*.pyc' \) \ 1576 -type f -print | xargs rm -f 1577 @rm -f boards.cfg 1578 1579backup: 1580 F=`basename $(srctree)` ; cd .. ; \ 1581 gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F 1582 1583help: 1584 @echo 'Cleaning targets:' 1585 @echo ' clean - Remove most generated files but keep the config' 1586 @echo ' mrproper - Remove all generated files + config + various backup files' 1587 @echo ' distclean - mrproper + remove editor backup and patch files' 1588 @echo '' 1589 @echo 'Configuration targets:' 1590 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help 1591 @echo '' 1592 @echo 'Other generic targets:' 1593 @echo ' all - Build all necessary images depending on configuration' 1594 @echo ' tests - Build U-Boot for sandbox and run tests' 1595 @echo '* u-boot - Build the bare u-boot' 1596 @echo ' dir/ - Build all files in dir and below' 1597 @echo ' dir/file.[oisS] - Build specified target only' 1598 @echo ' dir/file.lst - Build specified mixed source/assembly target only' 1599 @echo ' (requires a recent binutils and recent build (System.map))' 1600 @echo ' tags/ctags - Generate ctags file for editors' 1601 @echo ' etags - Generate etags file for editors' 1602 @echo ' cscope - Generate cscope index' 1603 @echo ' ubootrelease - Output the release version string (use with make -s)' 1604 @echo ' ubootversion - Output the version stored in Makefile (use with make -s)' 1605 @echo " cfg - Don't build, just create the .cfg files" 1606 @echo " envtools - Build only the target-side environment tools" 1607 @echo '' 1608 @echo 'Static analysers' 1609 @echo ' checkstack - Generate a list of stack hogs' 1610 @echo '' 1611 @echo 'Documentation targets:' 1612 @$(MAKE) -f $(srctree)/doc/DocBook/Makefile dochelp 1613 @echo '' 1614 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' 1615 @echo ' make V=2 [targets] 2 => give reason for rebuild of target' 1616 @echo ' make O=dir [targets] Locate all output files in "dir", including .config' 1617 @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)' 1618 @echo ' make C=2 [targets] Force check of all c source with $$CHECK' 1619 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections' 1620 @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where' 1621 @echo ' 1: warnings which may be relevant and do not occur too often' 1622 @echo ' 2: warnings which occur quite often but may still be relevant' 1623 @echo ' 3: more obscure warnings, can most likely be ignored' 1624 @echo ' Multiple levels can be combined with W=12 or W=123' 1625 @echo '' 1626 @echo 'Execute "make" or "make all" to build all targets marked with [*] ' 1627 @echo 'For further info see the ./README file' 1628 1629tests: 1630 $(srctree)/test/run 1631 1632# Documentation targets 1633# --------------------------------------------------------------------------- 1634%docs: scripts_basic FORCE 1635 $(Q)$(MAKE) $(build)=scripts build_docproc 1636 $(Q)$(MAKE) $(build)=doc/DocBook $@ 1637 1638endif #ifeq ($(config-targets),1) 1639endif #ifeq ($(mixed-targets),1) 1640 1641PHONY += checkstack ubootrelease ubootversion 1642 1643checkstack: 1644 $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \ 1645 $(PERL) $(src)/scripts/checkstack.pl $(ARCH) 1646 1647ubootrelease: 1648 @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" 1649 1650ubootversion: 1651 @echo $(UBOOTVERSION) 1652 1653# Single targets 1654# --------------------------------------------------------------------------- 1655# Single targets are compatible with: 1656# - build with mixed source and output 1657# - build with separate output dir 'make O=...' 1658# - external modules 1659# 1660# target-dir => where to store outputfile 1661# build-dir => directory in kernel source tree to use 1662 1663ifeq ($(KBUILD_EXTMOD),) 1664 build-dir = $(patsubst %/,%,$(dir $@)) 1665 target-dir = $(dir $@) 1666else 1667 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@))) 1668 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash)) 1669 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@)) 1670endif 1671 1672%.s: %.c prepare scripts FORCE 1673 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1674%.i: %.c prepare scripts FORCE 1675 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1676%.o: %.c prepare scripts FORCE 1677 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1678%.lst: %.c prepare scripts FORCE 1679 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1680%.s: %.S prepare scripts FORCE 1681 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1682%.o: %.S prepare scripts FORCE 1683 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1684%.symtypes: %.c prepare scripts FORCE 1685 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1686 1687# Modules 1688/: prepare scripts FORCE 1689 $(cmd_crmodverdir) 1690 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1691 $(build)=$(build-dir) 1692%/: prepare scripts FORCE 1693 $(cmd_crmodverdir) 1694 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1695 $(build)=$(build-dir) 1696%.ko: prepare scripts FORCE 1697 $(cmd_crmodverdir) 1698 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1699 $(build)=$(build-dir) $(@:.ko=.o) 1700 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost 1701 1702# FIXME Should go into a make.lib or something 1703# =========================================================================== 1704 1705quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) 1706 cmd_rmdirs = rm -rf $(rm-dirs) 1707 1708quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) 1709 cmd_rmfiles = rm -f $(rm-files) 1710 1711# read all saved command lines 1712 1713targets := $(wildcard $(sort $(targets))) 1714cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) 1715 1716ifneq ($(cmd_files),) 1717 $(cmd_files): ; # Do not try to update included dependency files 1718 include $(cmd_files) 1719endif 1720 1721endif # skip-makefile 1722 1723PHONY += FORCE 1724FORCE: 1725 1726# Declare the contents of the .PHONY variable as phony. We keep that 1727# information in a variable so we can use it in if_changed and friends. 1728.PHONY: $(PHONY) 1729