1 /* 2 * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions are met: 6 * 7 * Redistributions of source code must retain the above copyright notice, this 8 * list of conditions and the following disclaimer. 9 * 10 * Redistributions in binary form must reproduce the above copyright notice, 11 * this list of conditions and the following disclaimer in the documentation 12 * and/or other materials provided with the distribution. 13 * 14 * Neither the name of ARM nor the names of its contributors may be used 15 * to endorse or promote products derived from this software without specific 16 * prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 22 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 * POSSIBILITY OF SUCH DAMAGE. 29 */ 30 31 /******************************************************************************* 32 * This is the Secure Payload Dispatcher (SPD). The dispatcher is meant to be a 33 * plug-in component to the Secure Monitor, registered as a runtime service. The 34 * SPD is expected to be a functional extension of the Secure Payload (SP) that 35 * executes in Secure EL1. The Secure Monitor will delegate all SMCs targeting 36 * the Trusted OS/Applications range to the dispatcher. The SPD will either 37 * handle the request locally or delegate it to the Secure Payload. It is also 38 * responsible for initialising and maintaining communication with the SP. 39 ******************************************************************************/ 40 #include <arch_helpers.h> 41 #include <assert.h> 42 #include <bl_common.h> 43 #include <bl31.h> 44 #include <context_mgmt.h> 45 #include <debug.h> 46 #include <errno.h> 47 #include <platform.h> 48 #include <runtime_svc.h> 49 #include <stddef.h> 50 #include <tlk.h> 51 #include <uuid.h> 52 #include "tlkd_private.h" 53 54 extern const spd_pm_ops_t tlkd_pm_ops; 55 56 /******************************************************************************* 57 * Array to keep track of per-cpu Secure Payload state 58 ******************************************************************************/ 59 static tlk_context_t tlk_ctx; 60 61 /* TLK UID: RFC-4122 compliant UUID (version-5, sha-1) */ 62 DEFINE_SVC_UUID(tlk_uuid, 63 0xbd11e9c9, 0x2bba, 0x52ee, 0xb1, 0x72, 64 0x46, 0x1f, 0xba, 0x97, 0x7f, 0x63); 65 66 int32_t tlkd_init(void); 67 68 /* 69 * The number of arguments/results to save during a SMC call for TLK. 70 */ 71 #define TLK_SHDBUF_SIZE 4 72 73 /******************************************************************************* 74 * Shared memory buffer for passing SMC args/results to TLK 75 ******************************************************************************/ 76 typedef struct tlk_args_results { 77 uint64_t args[TLK_SHDBUF_SIZE]; 78 } tlk_args_results_t; 79 80 static tlk_args_results_t *tlk_args_results_buf; 81 82 /* 83 * Helper function to store args from TLK and pass results back 84 */ 85 static inline void store_tlk_args_results(uint64_t x0, uint64_t x1, uint64_t x2, 86 uint64_t x3) 87 { 88 /* store arguments sent by TLK */ 89 tlk_args_results_buf->args[0] = x0; 90 tlk_args_results_buf->args[1] = x1; 91 tlk_args_results_buf->args[2] = x2; 92 tlk_args_results_buf->args[3] = x3; 93 94 flush_dcache_range((uint64_t)tlk_args_results_buf, 95 sizeof(tlk_args_results_t)); 96 } 97 98 /******************************************************************************* 99 * Secure Payload Dispatcher setup. The SPD finds out the SP entrypoint and type 100 * (aarch32/aarch64) if not already known and initialises the context for entry 101 * into the SP for its initialisation. 102 ******************************************************************************/ 103 int32_t tlkd_setup(void) 104 { 105 entry_point_info_t *tlk_ep_info; 106 107 /* 108 * Get information about the Secure Payload (BL32) image. Its 109 * absence is a critical failure. 110 */ 111 tlk_ep_info = bl31_plat_get_next_image_ep_info(SECURE); 112 if (!tlk_ep_info) { 113 WARN("No SP provided. Booting device without SP" 114 " initialization. SMC`s destined for SP" 115 " will return SMC_UNK\n"); 116 return 1; 117 } 118 119 /* 120 * If there's no valid entry point for SP, we return a non-zero value 121 * signalling failure initializing the service. We bail out without 122 * registering any handlers 123 */ 124 if (!tlk_ep_info->pc) 125 return 1; 126 127 /* 128 * Inspect the SP image's SPSR and determine it's execution state 129 * i.e whether AArch32 or AArch64. 130 */ 131 tlkd_init_tlk_ep_state(tlk_ep_info, 132 (tlk_ep_info->spsr >> MODE_RW_SHIFT) & MODE_RW_MASK, 133 tlk_ep_info->pc, 134 &tlk_ctx); 135 136 /* 137 * All TLK SPD initialization done. Now register our init function 138 * with BL31 for deferred invocation 139 */ 140 bl31_register_bl32_init(&tlkd_init); 141 142 return 0; 143 } 144 145 /******************************************************************************* 146 * This function passes control to the Secure Payload image (BL32) for the first 147 * time on the primary cpu after a cold boot. It assumes that a valid secure 148 * context has already been created by tlkd_setup() which can be directly 149 * used. This function performs a synchronous entry into the Secure payload. 150 * The SP passes control back to this routine through a SMC. 151 ******************************************************************************/ 152 int32_t tlkd_init(void) 153 { 154 uint64_t mpidr = read_mpidr(); 155 entry_point_info_t *tlk_entry_point; 156 157 /* 158 * Get information about the Secure Payload (BL32) image. Its 159 * absence is a critical failure. 160 */ 161 tlk_entry_point = bl31_plat_get_next_image_ep_info(SECURE); 162 assert(tlk_entry_point); 163 164 cm_init_context(mpidr, tlk_entry_point); 165 166 /* 167 * Arrange for an entry into the test secure payload. 168 */ 169 return tlkd_synchronous_sp_entry(&tlk_ctx); 170 } 171 172 /******************************************************************************* 173 * This function is responsible for handling all SMCs in the Trusted OS/App 174 * range from the non-secure state as defined in the SMC Calling Convention 175 * Document. It is also responsible for communicating with the Secure payload 176 * to delegate work and return results back to the non-secure state. Lastly it 177 * will also return any information that the secure payload needs to do the 178 * work assigned to it. 179 ******************************************************************************/ 180 uint64_t tlkd_smc_handler(uint32_t smc_fid, 181 uint64_t x1, 182 uint64_t x2, 183 uint64_t x3, 184 uint64_t x4, 185 void *cookie, 186 void *handle, 187 uint64_t flags) 188 { 189 uint32_t ns; 190 191 /* Passing a NULL context is a critical programming error */ 192 assert(handle); 193 194 /* Determine which security state this SMC originated from */ 195 ns = is_caller_non_secure(flags); 196 197 switch (smc_fid) { 198 199 /* 200 * This function ID is used only by the SP to indicate it has 201 * finished initialising itself after a cold boot 202 */ 203 case TLK_ENTRY_DONE: 204 if (ns) 205 SMC_RET1(handle, SMC_UNK); 206 207 /* 208 * SP has been successfully initialized. Register power 209 * managemnt hooks with PSCI 210 */ 211 psci_register_spd_pm_hook(&tlkd_pm_ops); 212 213 /* 214 * TLK reports completion. The SPD must have initiated 215 * the original request through a synchronous entry 216 * into the SP. Jump back to the original C runtime 217 * context. 218 */ 219 tlkd_synchronous_sp_exit(&tlk_ctx, tlk_args_results_buf->args[0]); 220 221 /* 222 * This is a request from the secure payload to register 223 * shared memory to pass SMC args/results between EL1, EL3. 224 */ 225 case TLK_FID_SHARED_MEMBUF: 226 if (ns || !x1) 227 SMC_RET1(handle, SMC_UNK); 228 229 /* 230 * TODO: Check if the passed memory pointer is valid. Might 231 * require a call into the platform code. 232 */ 233 234 tlk_args_results_buf = (tlk_args_results_t *)x1; 235 SMC_RET0(handle); 236 237 /* 238 * Return the number of service function IDs implemented to 239 * provide service to non-secure 240 */ 241 case TOS_CALL_COUNT: 242 SMC_RET1(handle, TLK_NUM_FID); 243 244 /* 245 * Return TLK's UID to the caller 246 */ 247 case TOS_UID: 248 SMC_UUID_RET(handle, tlk_uuid); 249 250 /* 251 * Return the version of current implementation 252 */ 253 case TOS_CALL_VERSION: 254 SMC_RET2(handle, TLK_VERSION_MAJOR, TLK_VERSION_MINOR); 255 256 default: 257 break; 258 } 259 260 SMC_RET1(handle, SMC_UNK); 261 } 262 263 /* Define a SPD runtime service descriptor for fast SMC calls */ 264 DECLARE_RT_SVC( 265 tlkd_tos_fast, 266 267 OEN_TOS_START, 268 OEN_TOS_END, 269 SMC_TYPE_FAST, 270 tlkd_setup, 271 tlkd_smc_handler 272 ); 273 274 /* Define a SPD runtime service descriptor for standard SMC calls */ 275 DECLARE_RT_SVC( 276 tlkd_tos_std, 277 278 OEN_TOS_START, 279 OEN_TOS_END, 280 SMC_TYPE_STD, 281 NULL, 282 tlkd_smc_handler 283 ); 284