xref: /rk3399_ARM-atf/plat/xilinx/zynqmp/pm_service/pm_client.c (revision b62673c645752a78f649282cfa293e8da09e3bef)
1 /*
2  * Copyright (c) 2013-2018, Arm Limited and Contributors. All rights reserved.
3  * Copyright (c) 2022-2024, Advanced Micro Devices, Inc. All rights reserved.
4  *
5  * SPDX-License-Identifier: BSD-3-Clause
6  */
7 
8 /*
9  * APU specific definition of processors in the subsystem as well as functions
10  * for getting information about and changing state of the APU.
11  */
12 
13 #include <assert.h>
14 #include <string.h>
15 
16 #include <common/bl_common.h>
17 #include <drivers/arm/gic_common.h>
18 #include <drivers/arm/gicv2.h>
19 #include <lib/bakery_lock.h>
20 #include <lib/mmio.h>
21 #include <lib/utils.h>
22 
23 #include <plat_ipi.h>
24 #include "pm_client.h"
25 #include "pm_ipi.h"
26 #include <zynqmp_def.h>
27 #include "zynqmp_pm_api_sys.h"
28 
29 #define IRQ_MAX		84U
30 #define NUM_GICD_ISENABLER	((IRQ_MAX >> 5U) + 1U)
31 #define UNDEFINED_CPUID		(~0U)
32 
33 #define PM_SUSPEND_MODE_STD		0U
34 #define PM_SUSPEND_MODE_POWER_OFF	1U
35 
36 DEFINE_BAKERY_LOCK(pm_client_secure_lock);
37 
38 static const struct pm_ipi apu_ipi = {
39 	.local_ipi_id = IPI_LOCAL_ID,
40 	.remote_ipi_id = IPI_REMOTE_ID,
41 	.buffer_base = IPI_BUFFER_LOCAL_BASE,
42 };
43 
44 static uint32_t suspend_mode = PM_SUSPEND_MODE_STD;
45 
46 /* Order in pm_procs_all array must match cpu ids */
47 static const struct pm_proc pm_procs_all[] = {
48 	{
49 		.node_id = (uint32_t)NODE_APU_0,
50 		.pwrdn_mask = APU_0_PWRCTL_CPUPWRDWNREQ_MASK,
51 		.ipi = &apu_ipi,
52 	},
53 	{
54 		.node_id = (uint32_t)NODE_APU_1,
55 		.pwrdn_mask = APU_1_PWRCTL_CPUPWRDWNREQ_MASK,
56 		.ipi = &apu_ipi,
57 	},
58 	{
59 		.node_id = (uint32_t)NODE_APU_2,
60 		.pwrdn_mask = APU_2_PWRCTL_CPUPWRDWNREQ_MASK,
61 		.ipi = &apu_ipi,
62 	},
63 	{
64 		.node_id = (uint32_t)NODE_APU_3,
65 		.pwrdn_mask = APU_3_PWRCTL_CPUPWRDWNREQ_MASK,
66 		.ipi = &apu_ipi,
67 	},
68 };
69 
70 /* Interrupt to PM node ID map */
71 static enum pm_node_id irq_node_map[IRQ_MAX + 1U] = {
72 	NODE_UNKNOWN,
73 	NODE_UNKNOWN,
74 	NODE_UNKNOWN,
75 	NODE_UNKNOWN,	/* 3 */
76 	NODE_UNKNOWN,
77 	NODE_UNKNOWN,
78 	NODE_UNKNOWN,
79 	NODE_UNKNOWN,	/* 7 */
80 	NODE_UNKNOWN,
81 	NODE_UNKNOWN,
82 	NODE_UNKNOWN,
83 	NODE_UNKNOWN,	/* 11 */
84 	NODE_UNKNOWN,
85 	NODE_UNKNOWN,
86 	NODE_NAND,
87 	NODE_QSPI,	/* 15 */
88 	NODE_GPIO,
89 	NODE_I2C_0,
90 	NODE_I2C_1,
91 	NODE_SPI_0,	/* 19 */
92 	NODE_SPI_1,
93 	NODE_UART_0,
94 	NODE_UART_1,
95 	NODE_CAN_0,	/* 23 */
96 	NODE_CAN_1,
97 	NODE_UNKNOWN,
98 	NODE_RTC,
99 	NODE_RTC,	/* 27 */
100 	NODE_UNKNOWN,
101 	NODE_UNKNOWN,
102 	NODE_UNKNOWN,
103 	NODE_UNKNOWN,	/* 31 */
104 	NODE_UNKNOWN,
105 	NODE_UNKNOWN,
106 	NODE_UNKNOWN,
107 	NODE_UNKNOWN,	/* 35, NODE_IPI_APU */
108 	NODE_TTC_0,
109 	NODE_TTC_0,
110 	NODE_TTC_0,
111 	NODE_TTC_1,	/* 39 */
112 	NODE_TTC_1,
113 	NODE_TTC_1,
114 	NODE_TTC_2,
115 	NODE_TTC_2,	/* 43 */
116 	NODE_TTC_2,
117 	NODE_TTC_3,
118 	NODE_TTC_3,
119 	NODE_TTC_3,	/* 47 */
120 	NODE_SD_0,
121 	NODE_SD_1,
122 	NODE_SD_0,
123 	NODE_SD_1,	/* 51 */
124 	NODE_UNKNOWN,
125 	NODE_UNKNOWN,
126 	NODE_UNKNOWN,
127 	NODE_UNKNOWN,	/* 55 */
128 	NODE_UNKNOWN,
129 	NODE_ETH_0,
130 	NODE_ETH_0,
131 	NODE_ETH_1,	/* 59 */
132 	NODE_ETH_1,
133 	NODE_ETH_2,
134 	NODE_ETH_2,
135 	NODE_ETH_3,	/* 63 */
136 	NODE_ETH_3,
137 	NODE_USB_0,
138 	NODE_USB_0,
139 	NODE_USB_0,	/* 67 */
140 	NODE_USB_0,
141 	NODE_USB_0,
142 	NODE_USB_1,
143 	NODE_USB_1,	/* 71 */
144 	NODE_USB_1,
145 	NODE_USB_1,
146 	NODE_USB_1,
147 	NODE_USB_0,	/* 75 */
148 	NODE_USB_0,
149 	NODE_ADMA,
150 	NODE_ADMA,
151 	NODE_ADMA,	/* 79 */
152 	NODE_ADMA,
153 	NODE_ADMA,
154 	NODE_ADMA,
155 	NODE_ADMA,	/* 83 */
156 	NODE_ADMA,
157 };
158 
159 /**
160  * irq_to_pm_node - Get PM node ID corresponding to the interrupt number.
161  * @irq: Interrupt number.
162  *
163  * Return: PM node ID corresponding to the specified interrupt.
164  *
165  */
166 static enum pm_node_id irq_to_pm_node(uint32_t irq)
167 {
168 	assert(irq <= IRQ_MAX);
169 	return irq_node_map[irq];
170 }
171 
172 /**
173  * pm_client_set_wakeup_sources - Set all slaves with enabled interrupts as wake
174  *                                sources in the PMU firmware.
175  *
176  */
177 static void pm_client_set_wakeup_sources(void)
178 {
179 	uint32_t reg_num;
180 	uint8_t pm_wakeup_nodes_set[NODE_MAX] = { 0 };
181 	uintptr_t isenabler1 = BASE_GICD_BASE + GICD_ISENABLER + 4U;
182 
183 	/* In case of power-off suspend, only NODE_EXTERN must be set */
184 	if (suspend_mode == PM_SUSPEND_MODE_POWER_OFF) {
185 		enum pm_ret_status ret;
186 
187 		ret = pm_set_wakeup_source(NODE_APU, NODE_EXTERN, 1U);
188 		/**
189 		 * If NODE_EXTERN could not be set as wake source, proceed with
190 		 * standard suspend (no one will wake the system otherwise)
191 		 */
192 		if (ret == PM_RET_SUCCESS) {
193 			return;
194 		}
195 	}
196 
197 	zeromem(&pm_wakeup_nodes_set, sizeof(pm_wakeup_nodes_set));
198 
199 	for (reg_num = 0U; reg_num < NUM_GICD_ISENABLER; reg_num++) {
200 		uint32_t base_irq = reg_num << ISENABLER_SHIFT;
201 		uint32_t reg = mmio_read_32(isenabler1 + (uint64_t)(reg_num << 2U));
202 
203 		if (reg == 0) {
204 			continue;
205 		}
206 
207 		while (reg != 0U) {
208 			enum pm_node_id node;
209 			uint32_t idx, irq, lowest_set = reg & (-reg);
210 			enum pm_ret_status ret;
211 
212 			idx = (uint32_t)__builtin_ctz(lowest_set);
213 			irq = base_irq + idx;
214 
215 			if (irq > IRQ_MAX) {
216 				break;
217 			}
218 
219 			node = irq_to_pm_node(irq);
220 			reg &= ~lowest_set;
221 
222 			if ((node > NODE_UNKNOWN) && (node < NODE_MAX)) {
223 				if (pm_wakeup_nodes_set[node] == 0U) {
224 					ret = pm_set_wakeup_source(NODE_APU, node, 1U);
225 					pm_wakeup_nodes_set[node] = (ret == PM_RET_SUCCESS) ? 1U : 0U;
226 				}
227 			}
228 		}
229 	}
230 }
231 
232 /**
233  * pm_get_proc() - returns pointer to the proc structure.
234  * @cpuid: id of the cpu whose proc struct pointer should be returned.
235  *
236  * Return: pointer to a proc structure if proc is found, otherwise NULL.
237  *
238  */
239 const struct pm_proc *pm_get_proc(uint32_t cpuid)
240 {
241 	const struct pm_proc *ret = NULL;
242 
243 	if (cpuid < ARRAY_SIZE(pm_procs_all)) {
244 		ret = &pm_procs_all[cpuid];
245 	}
246 
247 	return ret;
248 }
249 
250 /**
251  * pm_get_cpuid() - get the local cpu ID for a global node ID.
252  * @nid: node id of the processor.
253  *
254  * Return: the cpu ID (starting from 0) for the subsystem.
255  *
256  */
257 static uint32_t pm_get_cpuid(enum pm_node_id nid)
258 {
259 	uint32_t ret = UNDEFINED_CPUID;
260 
261 	for (size_t i = 0; i < ARRAY_SIZE(pm_procs_all); i++) {
262 		if (pm_procs_all[i].node_id == nid) {
263 			ret = i;
264 			break;
265 		}
266 	}
267 
268 	return ret;
269 }
270 
271 const struct pm_proc *primary_proc = &pm_procs_all[0];
272 
273 /**
274  * pm_client_suspend() - Client-specific suspend actions.
275  * @proc: processor which need to suspend.
276  * @state: desired suspend state.
277  *
278  * This function should contain any PU-specific actions
279  * required prior to sending suspend request to PMU
280  * Actions taken depend on the state system is suspending to.
281  *
282  */
283 void pm_client_suspend(const struct pm_proc *proc, uint32_t state)
284 {
285 	bakery_lock_get(&pm_client_secure_lock);
286 
287 	if (state == PM_STATE_SUSPEND_TO_RAM) {
288 		pm_client_set_wakeup_sources();
289 	}
290 
291 	/* Set powerdown request */
292 	mmio_write_32(APU_PWRCTL, mmio_read_32(APU_PWRCTL) | proc->pwrdn_mask);
293 
294 	bakery_lock_release(&pm_client_secure_lock);
295 }
296 
297 
298 /**
299  * pm_client_abort_suspend() - Client-specific abort-suspend actions.
300  *
301  * This function should contain any PU-specific actions
302  * required for aborting a prior suspend request.
303  *
304  */
305 void pm_client_abort_suspend(void)
306 {
307 	/* Enable interrupts at processor level (for current cpu) */
308 	gicv2_cpuif_enable();
309 
310 	bakery_lock_get(&pm_client_secure_lock);
311 
312 	/* Clear powerdown request */
313 	mmio_write_32(APU_PWRCTL,
314 		 mmio_read_32(APU_PWRCTL) & ~primary_proc->pwrdn_mask);
315 
316 	bakery_lock_release(&pm_client_secure_lock);
317 }
318 
319 /**
320  * pm_client_wakeup() - Client-specific wakeup actions.
321  * @proc: Processor which need to wakeup.
322  *
323  * This function should contain any PU-specific actions
324  * required for waking up another APU core.
325  *
326  */
327 void pm_client_wakeup(const struct pm_proc *proc)
328 {
329 	uint32_t cpuid = pm_get_cpuid(proc->node_id);
330 	uint32_t val;
331 
332 	if (cpuid != UNDEFINED_CPUID) {
333 		bakery_lock_get(&pm_client_secure_lock);
334 
335 		/* clear powerdown bit for affected cpu */
336 		val = mmio_read_32(APU_PWRCTL);
337 
338 		val &= ~(proc->pwrdn_mask);
339 		mmio_write_32(APU_PWRCTL, val);
340 
341 		bakery_lock_release(&pm_client_secure_lock);
342 	}
343 }
344 
345 enum pm_ret_status pm_set_suspend_mode(uint32_t mode)
346 {
347 	enum pm_ret_status suspend_mode_status = PM_RET_ERROR_ARGS;
348 
349 	if ((mode == PM_SUSPEND_MODE_STD) ||
350 	    (mode == PM_SUSPEND_MODE_POWER_OFF)) {
351 		suspend_mode = mode;
352 		suspend_mode_status = PM_RET_SUCCESS;
353 	}
354 
355 	return suspend_mode_status;
356 }
357