xref: /rk3399_ARM-atf/plat/xilinx/versal_net/include/platform_def.h (revision 13304d30cd77ade18ffe868009c5ac872de1e026)

/*
 * Copyright (c) 2018-2020, Arm Limited and Contributors. All rights reserved.
 * Copyright (c) 2021-2022, Xilinx, Inc. All rights reserved.
 * Copyright (c) 2022-2025, Advanced Micro Devices, Inc. All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#ifndef PLATFORM_DEF_H
#define PLATFORM_DEF_H

#include <arch.h>
#include <drivers/arm/gic_common.h>
#include <plat_common.h>
#include "versal_net_def.h"

/*******************************************************************************
 * Generic platform constants
 ******************************************************************************/

/* Size of cacheable stacks */
#define PLATFORM_STACK_SIZE		U(0x440)

#define PLATFORM_CLUSTER_COUNT		U(4)
#define PLATFORM_CORE_COUNT_PER_CLUSTER	U(4) /* 4 CPUs per cluster */

#define PLATFORM_CORE_COUNT		(PLATFORM_CLUSTER_COUNT * PLATFORM_CORE_COUNT_PER_CLUSTER)

#define E_INVALID_CORE_COUNT		-1
#define E_INVALID_CLUSTER_COUNT		-3

#define PLAT_MAX_PWR_LVL		U(2)
#define PLAT_MAX_RET_STATE		U(1)
#define PLAT_MAX_OFF_STATE		U(2)

/*******************************************************************************
 * BL31 specific defines.
 ******************************************************************************/
/*
 * Put BL31 at the top of the Trusted SRAM (just below the shared memory, if
 * present). BL31_BASE is calculated using the current BL31 debug size plus a
 * little space for growth.
 */
#ifndef VERSAL_NET_ATF_MEM_BASE
# define BL31_BASE			U(0xBBF00000)
# define BL31_LIMIT			U(0xBC000000)
#else
# define BL31_BASE			U(VERSAL_NET_ATF_MEM_BASE)
# define BL31_LIMIT			U(VERSAL_NET_ATF_MEM_BASE + VERSAL_NET_ATF_MEM_SIZE)
# ifdef VERSAL_NET_ATF_MEM_PROGBITS_SIZE
#  define BL31_PROGBITS_LIMIT		U(VERSAL_NET_ATF_MEM_BASE + \
					  VERSAL_NET_ATF_MEM_PROGBITS_SIZE)
# endif
#endif

/*******************************************************************************
 * BL32 specific defines.
 ******************************************************************************/
#ifndef VERSAL_NET_BL32_MEM_BASE
# define BL32_BASE			U(0x60000000)
# define BL32_LIMIT			U(0x80000000)
#else
# define BL32_BASE			U(VERSAL_NET_BL32_MEM_BASE)
# define BL32_LIMIT			U(VERSAL_NET_BL32_MEM_BASE + VERSAL_NET_BL32_MEM_SIZE)
#endif

/*******************************************************************************
 * BL33 specific defines.
 ******************************************************************************/
#ifndef PRELOADED_BL33_BASE
# define PLAT_ARM_NS_IMAGE_BASE		U(0x8000000)
#else
# define PLAT_ARM_NS_IMAGE_BASE		U(PRELOADED_BL33_BASE)
#endif

/*******************************************************************************
 * HIGH and LOW DDR MAX definitions
 ******************************************************************************/
#define PLAT_DDR_LOWMEM_MAX		U(0x80000000)
#define PLAT_DDR_HIGHMEM_MAX		U(0x100000000)

/*******************************************************************************
 * TSP  specific defines.
 ******************************************************************************/
#define TSP_SEC_MEM_BASE		BL32_BASE
#define TSP_SEC_MEM_SIZE		(BL32_LIMIT - BL32_BASE)

/* ID of the secure physical generic timer interrupt used by the TSP */
#define TSP_IRQ_SEC_PHY_TIMER		ARM_IRQ_SEC_PHY_TIMER

/*******************************************************************************
 * Platform specific page table and MMU setup constants
 ******************************************************************************/

#define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 32U)
#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 32U)

#define XILINX_OF_BOARD_DTB_MAX_SIZE	U(0x200000)

#define PLAT_OCM_BASE			U(0xBBF00000)
#define PLAT_OCM_LIMIT			U(0xBC000000)

#define IS_TFA_IN_OCM(x)	((x >= PLAT_OCM_BASE) && (x < PLAT_OCM_LIMIT))

#ifndef MAX_MMAP_REGIONS
#if (defined(XILINX_OF_BOARD_DTB_ADDR) && !IS_TFA_IN_OCM(BL31_BASE))
#define MAX_MMAP_REGIONS		9
#else
#define MAX_MMAP_REGIONS		8
#endif
#endif

#ifndef MAX_XLAT_TABLES
#define MAX_XLAT_TABLES			U(9)
#endif

#define CACHE_WRITEBACK_SHIFT	U(6)
#define CACHE_WRITEBACK_GRANULE	(1 << CACHE_WRITEBACK_SHIFT)

#define PLAT_ARM_GICD_BASE	U(0xE2000000)
#define PLAT_ARM_GICR_BASE	U(0xE2060000)

/* interrupt priorities when SDEI is enabled:
 * RAS in future is planned to have highest priority (lower value 0x10)
 * followed by IPI and SDEI exceptions in a step of 0x10.
 */

#if SDEI_SUPPORT
#define VERSAL_NET_SDEI_SGI_PRIVATE     U(8)
#define PLAT_SDEI_CRITICAL_PRI		0x30
#define PLAT_SDEI_NORMAL_PRI		0x40
#define PLAT_PRI_BITS			U(3)
#define PLAT_IPI_PRI			0x20

#define PLAT_EHF_DESC	EHF_PRI_DESC(PLAT_PRI_BITS, PLAT_IPI_PRI)

#define VERSAL_NET_SDEI_SH_EVENT_0	U(200)
#define VERSAL_NET_SDEI_PRV_EV		U(201)
#endif

/*
 * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
 * terminology. On a GICv2 system or mode, the lists will be merged and treated
 * as Group 0 interrupts.
 */
#define PLAT_VERSAL_NET_IPI_IRQ	89
#define PLAT_VERSAL_IPI_IRQ	PLAT_VERSAL_NET_IPI_IRQ

#if SDEI_SUPPORT
#define PLAT_ARM_G1S_IRQ_PROPS(grp) \
	INTR_PROP_DESC(VERSAL_NET_IRQ_SEC_PHY_TIMER, PLAT_IPI_PRI, grp, \
			GIC_INTR_CFG_LEVEL)

#define PLAT_ARM_G0_IRQ_PROPS(grp) \
	INTR_PROP_DESC(PLAT_VERSAL_IPI_IRQ, PLAT_IPI_PRI, grp, \
			GIC_INTR_CFG_EDGE), \
	INTR_PROP_DESC(CPU_PWR_DOWN_REQ_INTR, PLAT_IPI_PRI, grp, \
			GIC_INTR_CFG_EDGE), \
	INTR_PROP_DESC(VERSAL_NET_SDEI_SGI_PRIVATE, PLAT_SDEI_NORMAL_PRI, grp, \
			GIC_INTR_CFG_EDGE)
#else
#define PLAT_ARM_G1S_IRQ_PROPS(grp) \
	INTR_PROP_DESC(VERSAL_NET_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \
			GIC_INTR_CFG_LEVEL)

#define PLAT_ARM_G0_IRQ_PROPS(grp) \
	INTR_PROP_DESC(PLAT_VERSAL_IPI_IRQ, GIC_HIGHEST_SEC_PRIORITY, grp, \
			GIC_INTR_CFG_EDGE), \
	INTR_PROP_DESC(CPU_PWR_DOWN_REQ_INTR, GIC_HIGHEST_SEC_PRIORITY, grp, \
			GIC_INTR_CFG_EDGE)
#endif

#define IRQ_MAX		200U

#endif /* PLATFORM_DEF_H */