xref: /rk3399_ARM-atf/plat/qti/msm8916/msm8916_pm.c (revision c822d26506a589d4fa017246eeb83627f2efb554)
1 /*
2  * Copyright (c) 2021-2022, Stephan Gerhold <stephan@gerhold.net>
3  *
4  * SPDX-License-Identifier: BSD-3-Clause
5  */
6 
7 #include <arch.h>
8 #include <arch_helpers.h>
9 #include <common/debug.h>
10 #include <drivers/arm/cci.h>
11 #include <drivers/arm/gicv2.h>
12 #include <drivers/delay_timer.h>
13 #include <lib/mmio.h>
14 #include <lib/psci/psci.h>
15 #include <plat/common/platform.h>
16 
17 #include <msm8916_mmap.h>
18 #include "msm8916_pm.h"
19 
20 /*
21  * On platforms with two clusters the index of the APCS memory region is swapped
22  * compared to the MPIDR cluster affinity level: APCS cluster 0 manages CPUs
23  * with cluster affinity level 1, while APCS cluster 1 manages CPUs with level 0.
24  *
25  * On platforms with a single cluster there is only one APCS memory region.
26  */
27 #if PLATFORM_CLUSTER_COUNT == 2
28 #define MPIDR_APCS_CLUSTER(mpidr)	!MPIDR_AFFLVL1_VAL(mpidr)
29 #else
30 #define MPIDR_APCS_CLUSTER(mpidr)	0
31 #endif
32 
33 #define CLUSTER_PWR_STATE(state) ((state)->pwr_domain_state[MPIDR_AFFLVL1])
34 
35 static int msm8916_pwr_domain_on(u_register_t mpidr)
36 {
37 	/* Power on L2 cache and secondary CPU core for the first time */
38 	if (PLATFORM_CLUSTER_COUNT > 1) {
39 		msm8916_l2_boot(APCS_GLB(MPIDR_APCS_CLUSTER(mpidr)));
40 	}
41 	msm8916_cpu_boot(APCS_ALIAS_ACS(MPIDR_APCS_CLUSTER(mpidr),
42 					MPIDR_AFFLVL0_VAL(mpidr)));
43 	return PSCI_E_SUCCESS;
44 }
45 
46 static void msm8916_pwr_domain_on_finish(const psci_power_state_t *target_state)
47 {
48 	if (PLATFORM_CLUSTER_COUNT > 1 &&
49 	    CLUSTER_PWR_STATE(target_state) == PLAT_MAX_OFF_STATE) {
50 		cci_enable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr_el1()));
51 	}
52 
53 	gicv2_pcpu_distif_init();
54 	gicv2_cpuif_enable();
55 }
56 
57 static void __dead2 msm8916_system_reset(void)
58 {
59 	mmio_write_32(MPM_PS_HOLD, 0);
60 	mdelay(1000);
61 
62 	ERROR("PSCI: System reset failed\n");
63 	panic();
64 }
65 
66 static const plat_psci_ops_t msm8916_psci_ops = {
67 	.pwr_domain_on			= msm8916_pwr_domain_on,
68 	.pwr_domain_on_finish		= msm8916_pwr_domain_on_finish,
69 	.system_off			= msm8916_system_reset,
70 	.system_reset			= msm8916_system_reset,
71 };
72 
73 /* Defined and used in msm8916_helpers.S */
74 extern uintptr_t msm8916_entry_point;
75 
76 int plat_setup_psci_ops(uintptr_t sec_entrypoint,
77 			const plat_psci_ops_t **psci_ops)
78 {
79 	/*
80 	 * The entry point is read with caches off (and even from two different
81 	 * physical addresses when read through the "boot remapper"), so make
82 	 * sure it is flushed to memory.
83 	 */
84 	msm8916_entry_point = sec_entrypoint;
85 	flush_dcache_range((uintptr_t)&msm8916_entry_point, sizeof(uintptr_t));
86 
87 	*psci_ops = &msm8916_psci_ops;
88 	return 0;
89 }
90