1 /* 2 * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions are met: 6 * 7 * Redistributions of source code must retain the above copyright notice, this 8 * list of conditions and the following disclaimer. 9 * 10 * Redistributions in binary form must reproduce the above copyright notice, 11 * this list of conditions and the following disclaimer in the documentation 12 * and/or other materials provided with the distribution. 13 * 14 * Neither the name of ARM nor the names of its contributors may be used 15 * to endorse or promote products derived from this software without specific 16 * prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 22 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 * POSSIBILITY OF SUCH DAMAGE. 29 */ 30 31 #include <arch.h> 32 #include <arch_helpers.h> 33 #include <assert.h> 34 #include <bl31.h> 35 #include <bl_common.h> 36 #include <console.h> 37 #include <cortex_a57.h> 38 #include <cortex_a53.h> 39 #include <debug.h> 40 #include <denver.h> 41 #include <errno.h> 42 #include <memctrl.h> 43 #include <mmio.h> 44 #include <platform.h> 45 #include <platform_def.h> 46 #include <stddef.h> 47 #include <tegra_private.h> 48 49 /******************************************************************************* 50 * Declarations of linker defined symbols which will help us find the layout 51 * of trusted SRAM 52 ******************************************************************************/ 53 extern unsigned long __RO_START__; 54 extern unsigned long __RO_END__; 55 extern unsigned long __BL31_END__; 56 57 extern uint64_t tegra_bl31_phys_base; 58 extern uint64_t tegra_console_base; 59 60 /* 61 * The next 3 constants identify the extents of the code, RO data region and the 62 * limit of the BL3-1 image. These addresses are used by the MMU setup code and 63 * therefore they must be page-aligned. It is the responsibility of the linker 64 * script to ensure that __RO_START__, __RO_END__ & __BL31_END__ linker symbols 65 * refer to page-aligned addresses. 66 */ 67 #define BL31_RO_BASE (unsigned long)(&__RO_START__) 68 #define BL31_RO_LIMIT (unsigned long)(&__RO_END__) 69 #define BL31_END (unsigned long)(&__BL31_END__) 70 71 static entry_point_info_t bl33_image_ep_info, bl32_image_ep_info; 72 static plat_params_from_bl2_t plat_bl31_params_from_bl2 = { 73 .tzdram_size = (uint64_t)TZDRAM_SIZE 74 }; 75 76 /******************************************************************************* 77 * This variable holds the non-secure image entry address 78 ******************************************************************************/ 79 extern uint64_t ns_image_entrypoint; 80 81 /******************************************************************************* 82 * Return a pointer to the 'entry_point_info' structure of the next image for 83 * security state specified. BL33 corresponds to the non-secure image type 84 * while BL32 corresponds to the secure image type. 85 ******************************************************************************/ 86 entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type) 87 { 88 if (type == NON_SECURE) 89 return &bl33_image_ep_info; 90 91 if (type == SECURE) 92 return &bl32_image_ep_info; 93 94 return NULL; 95 } 96 97 /******************************************************************************* 98 * Return a pointer to the 'plat_params_from_bl2_t' structure. The BL2 image 99 * passes this platform specific information. 100 ******************************************************************************/ 101 plat_params_from_bl2_t *bl31_get_plat_params(void) 102 { 103 return &plat_bl31_params_from_bl2; 104 } 105 106 /******************************************************************************* 107 * Perform any BL31 specific platform actions. Populate the BL33 and BL32 image 108 * info. 109 ******************************************************************************/ 110 void bl31_early_platform_setup(bl31_params_t *from_bl2, 111 void *plat_params_from_bl2) 112 { 113 plat_params_from_bl2_t *plat_params = 114 (plat_params_from_bl2_t *)plat_params_from_bl2; 115 #if DEBUG 116 int impl = (read_midr() >> MIDR_IMPL_SHIFT) & MIDR_IMPL_MASK; 117 #endif 118 119 /* 120 * Copy BL3-3, BL3-2 entry point information. 121 * They are stored in Secure RAM, in BL2's address space. 122 */ 123 assert(from_bl2->bl33_ep_info); 124 bl33_image_ep_info = *from_bl2->bl33_ep_info; 125 126 if (from_bl2->bl32_ep_info) 127 bl32_image_ep_info = *from_bl2->bl32_ep_info; 128 129 /* 130 * Parse platform specific parameters - TZDRAM aperture base and size 131 */ 132 assert(plat_params); 133 plat_bl31_params_from_bl2.tzdram_base = plat_params->tzdram_base; 134 plat_bl31_params_from_bl2.tzdram_size = plat_params->tzdram_size; 135 plat_bl31_params_from_bl2.uart_id = plat_params->uart_id; 136 137 /* 138 * Get the base address of the UART controller to be used for the 139 * console 140 */ 141 assert(plat_params->uart_id); 142 tegra_console_base = plat_get_console_from_id(plat_params->uart_id); 143 144 /* 145 * Configure the UART port to be used as the console 146 */ 147 assert(tegra_console_base); 148 console_init(tegra_console_base, TEGRA_BOOT_UART_CLK_IN_HZ, 149 TEGRA_CONSOLE_BAUDRATE); 150 151 /* Initialise crash console */ 152 plat_crash_console_init(); 153 154 INFO("BL3-1: Boot CPU: %s Processor [%lx]\n", (impl == DENVER_IMPL) ? 155 "Denver" : "ARM", read_mpidr()); 156 } 157 158 /******************************************************************************* 159 * Initialize the gic, configure the SCR. 160 ******************************************************************************/ 161 void bl31_platform_setup(void) 162 { 163 uint32_t tmp_reg; 164 165 /* 166 * Initialize delay timer 167 */ 168 tegra_delay_timer_init(); 169 170 /* 171 * Setup secondary CPU POR infrastructure. 172 */ 173 plat_secondary_setup(); 174 175 /* 176 * Initial Memory Controller configuration. 177 */ 178 tegra_memctrl_setup(); 179 180 /* 181 * Do initial security configuration to allow DRAM/device access. 182 */ 183 tegra_memctrl_tzdram_setup(plat_bl31_params_from_bl2.tzdram_base, 184 plat_bl31_params_from_bl2.tzdram_size); 185 186 /* Set the next EL to be AArch64 */ 187 tmp_reg = SCR_RES1_BITS | SCR_RW_BIT; 188 write_scr(tmp_reg); 189 190 /* Initialize the gic cpu and distributor interfaces */ 191 tegra_gic_setup(); 192 193 INFO("BL3-1: Tegra platform setup complete\n"); 194 } 195 196 /******************************************************************************* 197 * Perform the very early platform specific architectural setup here. At the 198 * moment this only intializes the mmu in a quick and dirty way. 199 ******************************************************************************/ 200 void bl31_plat_arch_setup(void) 201 { 202 unsigned long bl31_base_pa = tegra_bl31_phys_base; 203 unsigned long total_base = bl31_base_pa; 204 unsigned long total_size = BL32_BASE - BL31_RO_BASE; 205 unsigned long ro_start = bl31_base_pa; 206 unsigned long ro_size = BL31_RO_LIMIT - BL31_RO_BASE; 207 const mmap_region_t *plat_mmio_map = NULL; 208 #if USE_COHERENT_MEM 209 unsigned long coh_start, coh_size; 210 #endif 211 212 /* add memory regions */ 213 mmap_add_region(total_base, total_base, 214 total_size, 215 MT_MEMORY | MT_RW | MT_SECURE); 216 mmap_add_region(ro_start, ro_start, 217 ro_size, 218 MT_MEMORY | MT_RO | MT_SECURE); 219 220 #if USE_COHERENT_MEM 221 coh_start = total_base + (BL_COHERENT_RAM_BASE - BL31_RO_BASE); 222 coh_size = BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE; 223 224 mmap_add_region(coh_start, coh_start, 225 coh_size, 226 MT_DEVICE | MT_RW | MT_SECURE); 227 #endif 228 229 /* add MMIO space */ 230 plat_mmio_map = plat_get_mmio_map(); 231 if (plat_mmio_map) 232 mmap_add(plat_mmio_map); 233 else 234 WARN("MMIO map not available\n"); 235 236 /* set up translation tables */ 237 init_xlat_tables(); 238 239 /* enable the MMU */ 240 enable_mmu_el3(0); 241 242 INFO("BL3-1: Tegra: MMU enabled\n"); 243 } 244 245 /******************************************************************************* 246 * Check if the given NS DRAM range is valid 247 ******************************************************************************/ 248 int bl31_check_ns_address(uint64_t base, uint64_t size_in_bytes) 249 { 250 uint64_t end = base + size_in_bytes - 1; 251 252 /* 253 * Check if the NS DRAM address is valid 254 */ 255 if ((base < TEGRA_DRAM_BASE) || (end > TEGRA_DRAM_END) || 256 (base >= end)) { 257 ERROR("NS address is out-of-bounds!\n"); 258 return -EFAULT; 259 } 260 261 /* 262 * TZDRAM aperture contains the BL31 and BL32 images, so we need 263 * to check if the NS DRAM range overlaps the TZDRAM aperture. 264 */ 265 if ((base < TZDRAM_END) && (end > tegra_bl31_phys_base)) { 266 ERROR("NS address overlaps TZDRAM!\n"); 267 return -ENOTSUP; 268 } 269 270 /* valid NS address */ 271 return 0; 272 } 273