xref: /rk3399_ARM-atf/plat/mediatek/mt8173/include/plat_macros.S (revision 6331a31a66cdcf53421d3dccd3067f072c6da175)
1/*
2 * Copyright (c) 2014-2015, ARM Limited and Contributors. All rights reserved.
3 *
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions are met:
6 *
7 * Redistributions of source code must retain the above copyright notice, this
8 * list of conditions and the following disclaimer.
9 *
10 * Redistributions in binary form must reproduce the above copyright notice,
11 * this list of conditions and the following disclaimer in the documentation
12 * and/or other materials provided with the distribution.
13 *
14 * Neither the name of ARM nor the names of its contributors may be used
15 * to endorse or promote products derived from this software without specific
16 * prior written permission.
17 *
18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
22 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28 * POSSIBILITY OF SUCH DAMAGE.
29 */
30
31#include <cci.h>
32#include <gic_v2.h>
33#include <mt8173_def.h>
34
35.section .rodata.gic_reg_name, "aS"
36gicc_regs:
37	.asciz "gicc_hppir", "gicc_ahppir", "gicc_ctlr", ""
38gicd_pend_reg:
39	.asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n"	\
40		" Offset:\t\t\tvalue\n"
41newline:
42	.asciz "\n"
43spacer:
44	.asciz ":\t\t0x"
45
46.section .rodata.cci_reg_name, "aS"
47cci_iface_regs:
48	.asciz "cci_snoop_ctrl_cluster0", "cci_snoop_ctrl_cluster1" , ""
49
50	/* ---------------------------------------------
51	 * The below macro prints out relevant GIC and
52	 * CCI registers whenever an unhandled exception
53	 * is taken in BL3-1.
54	 * Clobbers: x0 - x10, x16, x17, sp
55	 * ---------------------------------------------
56	 */
57	.macro plat_crash_print_regs
58	mov_imm x16, BASE_GICD_BASE
59	mov_imm x17, BASE_GICC_BASE
60	/* Load the gicc reg list to x6 */
61	adr	x6, gicc_regs
62	/* Load the gicc regs to gp regs used by str_in_crash_buf_print */
63	ldr	w8, [x17, #GICC_HPPIR]
64	ldr	w9, [x17, #GICC_AHPPIR]
65	ldr	w10, [x17, #GICC_CTLR]
66	/* Store to the crash buf and print to console */
67	bl	str_in_crash_buf_print
68
69	/* Print the GICD_ISPENDR regs */
70	add	x7, x16, #GICD_ISPENDR
71	adr	x4, gicd_pend_reg
72	bl	asm_print_str
73gicd_ispendr_loop:
74	sub	x4, x7, x16
75	cmp	x4, #0x280
76	b.eq	exit_print_gic_regs
77	bl	asm_print_hex
78
79	adr	x4, spacer
80	bl	asm_print_str
81
82	ldr	x4, [x7], #8
83	bl	asm_print_hex
84
85	adr	x4, newline
86	bl	asm_print_str
87	b	gicd_ispendr_loop
88exit_print_gic_regs:
89
90	adr	x6, cci_iface_regs
91	/* Store in x7 the base address of the first interface */
92	mov_imm	x7, (PLAT_MT_CCI_BASE + SLAVE_IFACE_OFFSET(	\
93			PLAT_MT_CCI_CLUSTER0_SL_IFACE_IX))
94	ldr	w8, [x7, #SNOOP_CTRL_REG]
95	/* Store in x7 the base address of the second interface */
96	mov_imm	x7, (PLAT_MT_CCI_BASE + SLAVE_IFACE_OFFSET(	\
97			PLAT_MT_CCI_CLUSTER1_SL_IFACE_IX))
98	ldr	w9, [x7, #SNOOP_CTRL_REG]
99	/* Store to the crash buf and print to console */
100	bl	str_in_crash_buf_print
101	.endm
102