1 /* 2 * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved. 3 * Copyright (c) 2019-2023, Intel Corporation. All rights reserved. 4 * Copyright (c) 2024, Altera Corporation. All rights reserved. 5 * 6 * SPDX-License-Identifier: BSD-3-Clause 7 */ 8 9 #ifndef PLAT_SOCFPGA_DEF_H 10 #define PLAT_SOCFPGA_DEF_H 11 12 #include "agilex5_memory_controller.h" 13 #include "agilex5_system_manager.h" 14 15 #include <platform_def.h> 16 17 /* Platform Setting */ 18 #define PLATFORM_MODEL PLAT_SOCFPGA_AGILEX5 19 #define BOOT_SOURCE BOOT_SOURCE_SDMMC 20 /* 1 = Flush cache, 0 = No cache flush. 21 * Default for Agilex5 is Cache flush. 22 */ 23 #define CACHE_FLUSH 1 24 #define MMC_DEVICE_TYPE 1 /* MMC = 0, SD = 1 */ 25 #define XLAT_TABLES_V2 U(1) 26 #define PLAT_PRIMARY_CPU_A55 0x000 27 #define PLAT_PRIMARY_CPU_A76 0x200 28 #define PLAT_CLUSTER_ID_MPIDR_AFF_SHIFT MPIDR_AFF2_SHIFT 29 #define PLAT_CPU_ID_MPIDR_AFF_SHIFT MPIDR_AFF1_SHIFT 30 #define PLAT_L2_RESET_REQ 0xB007C0DE 31 #define PLAT_HANDOFF_OFFSET 0x0007F000 32 #define PLAT_TIMER_BASE_ADDR 0x10D01000 33 34 /* System Counter */ 35 /* TODO: Update back to 400MHz. 36 * This shall be updated to read from L4 clock instead of hardcoded. 37 */ 38 #define PLAT_SYS_COUNTER_FREQ_IN_TICKS U(400000000) 39 #define PLAT_SYS_COUNTER_FREQ_IN_MHZ U(400) 40 41 /* FPGA config helpers */ 42 #define INTEL_SIP_SMC_FPGA_CONFIG_ADDR 0x80400000 43 #define INTEL_SIP_SMC_FPGA_CONFIG_SIZE 0x82000000 44 45 /* QSPI Setting */ 46 #define CAD_QSPIDATA_OFST 0x10900000 47 #define CAD_QSPI_OFFSET 0x108d2000 48 49 /* SDMMC Setting */ 50 # if ARM_LINUX_KERNEL_AS_BL33 51 #define SOCFPGA_MMC_BLOCK_SIZE U(32768) 52 # else 53 #define SOCFPGA_MMC_BLOCK_SIZE U(8192) 54 # endif 55 56 /* Register Mapping */ 57 #define SOCFPGA_CCU_NOC_REG_BASE 0x1c000000 58 #define SOCFPGA_F2SDRAMMGR_REG_BASE 0x18001000 59 60 #define SOCFPGA_MMC_REG_BASE 0x10808000 61 #define SOCFPGA_MEMCTRL_REG_BASE 0x108CC000 62 #define SOCFPGA_RSTMGR_REG_BASE 0x10d11000 63 #define SOCFPGA_SYSMGR_REG_BASE 0x10d12000 64 #define SOCFPGA_PINMUX_REG_BASE 0x10d13000 65 #define SOCFPGA_NAND_REG_BASE 0x10B80000 66 #define SOCFPGA_ECC_QSPI_REG_BASE 0x10A22000 67 68 #define SOCFPGA_L4_PER_SCR_REG_BASE 0x10d21000 69 #define SOCFPGA_L4_SYS_SCR_REG_BASE 0x10d21100 70 #define SOCFPGA_SOC2FPGA_SCR_REG_BASE 0x10d21200 71 #define SOCFPGA_LWSOC2FPGA_SCR_REG_BASE 0x10d21300 72 73 /* Define maximum page size for NAND flash devices */ 74 #define PLATFORM_MTD_MAX_PAGE_SIZE U(0x2000) 75 76 /******************************************************************************* 77 * Platform memory map related constants 78 ******************************************************************************/ 79 #define DRAM_BASE (0x80000000) 80 #define DRAM_SIZE (0x80000000) 81 82 #define OCRAM_BASE (0x00000000) 83 #define OCRAM_SIZE (0x00080000) 84 85 #define MEM64_BASE (0x0080000000) 86 #define MEM64_SIZE (0x0080000000) 87 88 //128MB PSS 89 #define PSS_BASE (0x10000000) 90 #define PSS_SIZE (0x08000000) 91 92 //64MB MPFE 93 #define MPFE_BASE (0x18000000) 94 #define MPFE_SIZE (0x04000000) 95 96 //16MB CCU 97 #define CCU_BASE (0x1C000000) 98 #define CCU_SIZE (0x01000000) 99 100 //1MB GIC 101 #define GIC_BASE (0x1D000000) 102 #define GIC_SIZE (0x00100000) 103 104 #define BL2_BASE (0x00000000) 105 #define BL2_LIMIT (0x0007E000) 106 107 #define BL31_BASE (0x80000000) 108 #define BL31_LIMIT (0x82000000) 109 /******************************************************************************* 110 * UART related constants 111 ******************************************************************************/ 112 #define PLAT_UART0_BASE (0x10C02000) 113 #define PLAT_UART1_BASE (0x10C02100) 114 115 /******************************************************************************* 116 * WDT related constants 117 ******************************************************************************/ 118 #define WDT_BASE (0x10D00200) 119 120 /******************************************************************************* 121 * GIC related constants 122 ******************************************************************************/ 123 #define PLAT_GIC_BASE (0x1D000000) 124 #define PLAT_GICC_BASE (PLAT_GIC_BASE + 0x20000) 125 #define PLAT_GICD_BASE (PLAT_GIC_BASE + 0x00000) 126 #define PLAT_GICR_BASE (PLAT_GIC_BASE + 0x60000) 127 128 #define PLAT_INTEL_SOCFPGA_GICR_BASE PLAT_GICR_BASE 129 130 /******************************************************************************* 131 * SDMMC related pointer function 132 ******************************************************************************/ 133 #define SDMMC_READ_BLOCKS sdmmc_read_blocks 134 #define SDMMC_WRITE_BLOCKS sdmmc_write_blocks 135 136 /******************************************************************************* 137 * sysmgr.boot_scratch_cold6 & 7 (64bit) are used to indicate L2 reset 138 * is done and HPS should trigger warm reset via RMR_EL3. 139 ******************************************************************************/ 140 #define L2_RESET_DONE_REG 0x10D12218 141 142 #endif /* PLAT_SOCFPGA_DEF_H */ 143