1 /* 2 * Copyright (c) 2018-2020, ARM Limited and Contributors. All rights reserved. 3 * 4 * SPDX-License-Identifier: BSD-3-Clause 5 */ 6 7 #include <assert.h> 8 9 #if MEASURED_BOOT 10 #include <common/desc_image_load.h> 11 #endif 12 #include <common/fdt_wrappers.h> 13 14 #include <libfdt.h> 15 16 #include <plat/arm/common/arm_dyn_cfg_helpers.h> 17 #include <plat/arm/common/plat_arm.h> 18 19 #define DTB_PROP_MBEDTLS_HEAP_ADDR "mbedtls_heap_addr" 20 #define DTB_PROP_MBEDTLS_HEAP_SIZE "mbedtls_heap_size" 21 22 #if MEASURED_BOOT 23 #ifdef SPD_opteed 24 /* 25 * Currently OP-TEE does not support reading DTBs from Secure memory 26 * and this property should be removed when this feature is supported. 27 */ 28 #define DTB_PROP_HW_SM_LOG_ADDR "tpm_event_log_sm_addr" 29 #endif /* SPD_opteed */ 30 #define DTB_PROP_HW_LOG_ADDR "tpm_event_log_addr" 31 #define DTB_PROP_HW_LOG_SIZE "tpm_event_log_size" 32 #endif /* MEASURED_BOOT */ 33 34 /******************************************************************************* 35 * Validate the tb_fw_config is a valid DTB file and returns the node offset 36 * to "arm,tb_fw" property. 37 * Arguments: 38 * void *dtb - pointer to the TB_FW_CONFIG in memory 39 * int *node - Returns the node offset to "arm,tb_fw" property if found. 40 * 41 * Returns 0 on success and -1 on error. 42 ******************************************************************************/ 43 int arm_dyn_tb_fw_cfg_init(void *dtb, int *node) 44 { 45 assert(dtb != NULL); 46 assert(node != NULL); 47 48 /* Check if the pointer to DT is correct */ 49 if (fdt_check_header(dtb) != 0) { 50 WARN("Invalid DTB file passed as%s\n", " TB_FW_CONFIG"); 51 return -1; 52 } 53 54 /* Assert the node offset point to "arm,tb_fw" compatible property */ 55 *node = fdt_node_offset_by_compatible(dtb, -1, "arm,tb_fw"); 56 if (*node < 0) { 57 WARN("The compatible property '%s' not%s", "arm,tb_fw", 58 " found in the config\n"); 59 return -1; 60 } 61 62 VERBOSE("Dyn cfg: '%s'%s", "arm,tb_fw", " found in the config\n"); 63 return 0; 64 } 65 66 /* 67 * This function writes the Mbed TLS heap address and size in the DTB. When it 68 * is called, it is guaranteed that a DTB is available. However it is not 69 * guaranteed that the shared Mbed TLS heap implementation is used. Thus we 70 * return error code from here and it's the responsibility of the caller to 71 * determine the action upon error. 72 * 73 * This function is supposed to be called only by BL1. 74 * 75 * Returns: 76 * 0 = success 77 * -1 = error 78 */ 79 int arm_set_dtb_mbedtls_heap_info(void *dtb, void *heap_addr, size_t heap_size) 80 { 81 int dtb_root; 82 83 /* 84 * Verify that the DTB is valid, before attempting to write to it, 85 * and get the DTB root node. 86 */ 87 int err = arm_dyn_tb_fw_cfg_init(dtb, &dtb_root); 88 if (err < 0) { 89 ERROR("Invalid%s loaded. Unable to get root node\n", 90 " TB_FW_CONFIG"); 91 return -1; 92 } 93 94 /* 95 * Write the heap address and size in the DTB. 96 * 97 * NOTE: The variables heap_addr and heap_size are corrupted 98 * by the "fdtw_write_inplace_cells" function. After the 99 * function calls they must NOT be reused. 100 */ 101 err = fdtw_write_inplace_cells(dtb, dtb_root, 102 DTB_PROP_MBEDTLS_HEAP_ADDR, 2, &heap_addr); 103 if (err < 0) { 104 ERROR("%sDTB property '%s'\n", 105 "Unable to write ", DTB_PROP_MBEDTLS_HEAP_ADDR); 106 return -1; 107 } 108 109 err = fdtw_write_inplace_cells(dtb, dtb_root, 110 DTB_PROP_MBEDTLS_HEAP_SIZE, 1, &heap_size); 111 if (err < 0) { 112 ERROR("%sDTB property '%s'\n", 113 "Unable to write ", DTB_PROP_MBEDTLS_HEAP_SIZE); 114 return -1; 115 } 116 117 return 0; 118 } 119 120 #if MEASURED_BOOT 121 /* 122 * Write the Event Log address and its size in the DTB. 123 * 124 * This function is supposed to be called only by BL2. 125 * 126 * Returns: 127 * 0 = success 128 * < 0 = error 129 */ 130 static int arm_set_event_log_info(uintptr_t config_base, 131 #ifdef SPD_opteed 132 uintptr_t sm_log_addr, 133 #endif 134 uintptr_t log_addr, size_t log_size) 135 { 136 /* As libfdt uses void *, we can't avoid this cast */ 137 void *dtb = (void *)config_base; 138 const char *compatible = "arm,tpm_event_log"; 139 int err, node; 140 141 /* 142 * Verify that the DTB is valid, before attempting to write to it, 143 * and get the DTB root node. 144 */ 145 146 /* Check if the pointer to DT is correct */ 147 err = fdt_check_header(dtb); 148 if (err < 0) { 149 WARN("Invalid DTB file passed\n"); 150 return err; 151 } 152 153 /* Assert the node offset point to compatible property */ 154 node = fdt_node_offset_by_compatible(dtb, -1, compatible); 155 if (node < 0) { 156 WARN("The compatible property '%s' not%s", compatible, 157 " found in the config\n"); 158 return node; 159 } 160 161 VERBOSE("Dyn cfg: '%s'%s", compatible, " found in the config\n"); 162 163 #ifdef SPD_opteed 164 if (sm_log_addr != 0UL) { 165 err = fdtw_write_inplace_cells(dtb, node, 166 DTB_PROP_HW_SM_LOG_ADDR, 2, &sm_log_addr); 167 if (err < 0) { 168 ERROR("%sDTB property '%s'\n", 169 "Unable to write ", DTB_PROP_HW_SM_LOG_ADDR); 170 return err; 171 } 172 } 173 #endif 174 err = fdtw_write_inplace_cells(dtb, node, 175 DTB_PROP_HW_LOG_ADDR, 2, &log_addr); 176 if (err < 0) { 177 ERROR("%sDTB property '%s'\n", 178 "Unable to write ", DTB_PROP_HW_LOG_ADDR); 179 return err; 180 } 181 182 err = fdtw_write_inplace_cells(dtb, node, 183 DTB_PROP_HW_LOG_SIZE, 1, &log_size); 184 if (err < 0) { 185 ERROR("%sDTB property '%s'\n", 186 "Unable to write ", DTB_PROP_HW_LOG_SIZE); 187 } else { 188 /* 189 * Ensure that the info written to the DTB is visible 190 * to other images. 191 */ 192 flush_dcache_range(config_base, fdt_totalsize(dtb)); 193 } 194 195 return err; 196 } 197 198 /* 199 * This function writes the Event Log address and its size 200 * in the TOS_FW_CONFIG DTB. 201 * 202 * This function is supposed to be called only by BL2. 203 * 204 * Returns: 205 * 0 = success 206 * < 0 = error 207 */ 208 int arm_set_tos_fw_info(uintptr_t config_base, uintptr_t log_addr, 209 size_t log_size) 210 { 211 int err; 212 213 assert(config_base != 0UL); 214 assert(log_addr != 0UL); 215 216 /* Write the Event Log address and its size in the DTB */ 217 err = arm_set_event_log_info(config_base, 218 #ifdef SPD_opteed 219 0UL, 220 #endif 221 log_addr, log_size); 222 if (err < 0) { 223 ERROR("%sEvent Log data to TOS_FW_CONFIG\n", 224 "Unable to write "); 225 } 226 227 return err; 228 } 229 230 /* 231 * This function writes the Event Log address and its size 232 * in the NT_FW_CONFIG DTB. 233 * 234 * This function is supposed to be called only by BL2. 235 * 236 * Returns: 237 * 0 = success 238 * < 0 = error 239 */ 240 int arm_set_nt_fw_info(uintptr_t config_base, 241 #ifdef SPD_opteed 242 uintptr_t log_addr, 243 #endif 244 size_t log_size, uintptr_t *ns_log_addr) 245 { 246 uintptr_t ns_addr; 247 const bl_mem_params_node_t *cfg_mem_params; 248 int err; 249 250 assert(config_base != 0UL); 251 assert(ns_log_addr != NULL); 252 253 /* Get the config load address and size from NT_FW_CONFIG */ 254 cfg_mem_params = get_bl_mem_params_node(NT_FW_CONFIG_ID); 255 assert(cfg_mem_params != NULL); 256 257 /* Calculate Event Log address in Non-secure memory */ 258 ns_addr = cfg_mem_params->image_info.image_base + 259 cfg_mem_params->image_info.image_max_size; 260 261 /* Check for memory space */ 262 if ((uint64_t)(ns_addr + log_size) > ARM_NS_DRAM1_END) { 263 return -1; 264 } 265 266 /* Write the Event Log address and its size in the DTB */ 267 err = arm_set_event_log_info(config_base, 268 #ifdef SPD_opteed 269 log_addr, 270 #endif 271 ns_addr, log_size); 272 273 /* Return Event Log address in Non-secure memory */ 274 *ns_log_addr = (err < 0) ? 0UL : ns_addr; 275 return err; 276 } 277 #endif /* MEASURED_BOOT */ 278