1# 2# Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved. 3# 4# SPDX-License-Identifier: BSD-3-Clause 5# 6 7ifeq (${ARCH}, aarch64) 8 # On ARM standard platorms, the TSP can execute from Trusted SRAM, Trusted 9 # DRAM (if available) or the TZC secured area of DRAM. 10 # TZC secured DRAM is the default. 11 12 ARM_TSP_RAM_LOCATION ?= dram 13 14 ifeq (${ARM_TSP_RAM_LOCATION}, tsram) 15 ARM_TSP_RAM_LOCATION_ID = ARM_TRUSTED_SRAM_ID 16 else ifeq (${ARM_TSP_RAM_LOCATION}, tdram) 17 ARM_TSP_RAM_LOCATION_ID = ARM_TRUSTED_DRAM_ID 18 else ifeq (${ARM_TSP_RAM_LOCATION}, dram) 19 ARM_TSP_RAM_LOCATION_ID = ARM_DRAM_ID 20 else 21 $(error "Unsupported ARM_TSP_RAM_LOCATION value") 22 endif 23 24 # Process flags 25 # Process ARM_BL31_IN_DRAM flag 26 ARM_BL31_IN_DRAM := 0 27 $(eval $(call assert_boolean,ARM_BL31_IN_DRAM)) 28 $(eval $(call add_define,ARM_BL31_IN_DRAM)) 29else 30 ARM_TSP_RAM_LOCATION_ID = ARM_TRUSTED_SRAM_ID 31endif 32 33$(eval $(call add_define,ARM_TSP_RAM_LOCATION_ID)) 34 35 36# For the original power-state parameter format, the State-ID can be encoded 37# according to the recommended encoding or zero. This flag determines which 38# State-ID encoding to be parsed. 39ARM_RECOM_STATE_ID_ENC := 0 40 41# If the PSCI_EXTENDED_STATE_ID is set, then ARM_RECOM_STATE_ID_ENC need to 42# be set. Else throw a build error. 43ifeq (${PSCI_EXTENDED_STATE_ID}, 1) 44 ifeq (${ARM_RECOM_STATE_ID_ENC}, 0) 45 $(error Build option ARM_RECOM_STATE_ID_ENC needs to be set if \ 46 PSCI_EXTENDED_STATE_ID is set for ARM platforms) 47 endif 48endif 49 50# Process ARM_RECOM_STATE_ID_ENC flag 51$(eval $(call assert_boolean,ARM_RECOM_STATE_ID_ENC)) 52$(eval $(call add_define,ARM_RECOM_STATE_ID_ENC)) 53 54# Process ARM_DISABLE_TRUSTED_WDOG flag 55# By default, Trusted Watchdog is always enabled unless SPIN_ON_BL1_EXIT is set 56ARM_DISABLE_TRUSTED_WDOG := 0 57ifeq (${SPIN_ON_BL1_EXIT}, 1) 58ARM_DISABLE_TRUSTED_WDOG := 1 59endif 60$(eval $(call assert_boolean,ARM_DISABLE_TRUSTED_WDOG)) 61$(eval $(call add_define,ARM_DISABLE_TRUSTED_WDOG)) 62 63# Process ARM_CONFIG_CNTACR 64ARM_CONFIG_CNTACR := 1 65$(eval $(call assert_boolean,ARM_CONFIG_CNTACR)) 66$(eval $(call add_define,ARM_CONFIG_CNTACR)) 67 68# Process ARM_BL31_IN_DRAM flag 69ARM_BL31_IN_DRAM := 0 70$(eval $(call assert_boolean,ARM_BL31_IN_DRAM)) 71$(eval $(call add_define,ARM_BL31_IN_DRAM)) 72 73# Process ARM_PLAT_MT flag 74ARM_PLAT_MT := 0 75$(eval $(call assert_boolean,ARM_PLAT_MT)) 76$(eval $(call add_define,ARM_PLAT_MT)) 77 78# Use translation tables library v2 by default 79ARM_XLAT_TABLES_LIB_V1 := 0 80$(eval $(call assert_boolean,ARM_XLAT_TABLES_LIB_V1)) 81$(eval $(call add_define,ARM_XLAT_TABLES_LIB_V1)) 82 83# Don't have the Linux kernel as a BL33 image by default 84ARM_LINUX_KERNEL_AS_BL33 := 0 85$(eval $(call assert_boolean,ARM_LINUX_KERNEL_AS_BL33)) 86$(eval $(call add_define,ARM_LINUX_KERNEL_AS_BL33)) 87 88ifeq (${ARM_LINUX_KERNEL_AS_BL33},1) 89 ifneq (${ARCH},aarch64) 90 ifneq (${RESET_TO_SP_MIN},1) 91 $(error "ARM_LINUX_KERNEL_AS_BL33 is only available if RESET_TO_SP_MIN=1.") 92 endif 93 endif 94 ifndef PRELOADED_BL33_BASE 95 $(error "PRELOADED_BL33_BASE must be set if ARM_LINUX_KERNEL_AS_BL33 is used.") 96 endif 97 ifndef ARM_PRELOADED_DTB_BASE 98 $(error "ARM_PRELOADED_DTB_BASE must be set if ARM_LINUX_KERNEL_AS_BL33 is used.") 99 endif 100 $(eval $(call add_define,ARM_PRELOADED_DTB_BASE)) 101endif 102 103# Use an implementation of SHA-256 with a smaller memory footprint but reduced 104# speed. 105$(eval $(call add_define,MBEDTLS_SHA256_SMALLER)) 106 107# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images 108# in the FIP if the platform requires. 109ifneq ($(BL32_EXTRA1),) 110$(eval $(call TOOL_ADD_IMG,bl32_extra1,--tos-fw-extra1)) 111endif 112ifneq ($(BL32_EXTRA2),) 113$(eval $(call TOOL_ADD_IMG,bl32_extra2,--tos-fw-extra2)) 114endif 115 116# Enable PSCI_STAT_COUNT/RESIDENCY APIs on ARM platforms 117ENABLE_PSCI_STAT := 1 118ENABLE_PMF := 1 119 120# Override the standard libc with optimised libc_asm 121OVERRIDE_LIBC := 1 122ifeq (${OVERRIDE_LIBC},1) 123 include lib/libc/libc_asm.mk 124endif 125 126# On ARM platforms, separate the code and read-only data sections to allow 127# mapping the former as executable and the latter as execute-never. 128SEPARATE_CODE_AND_RODATA := 1 129 130# On ARM platforms, disable SEPARATE_NOBITS_REGION by default. Both PROGBITS 131# and NOBITS sections of BL31 image are adjacent to each other and loaded 132# into Trusted SRAM. 133SEPARATE_NOBITS_REGION := 0 134 135# In order to support SEPARATE_NOBITS_REGION for Arm platforms, we need to load 136# BL31 PROGBITS into secure DRAM space and BL31 NOBITS into SRAM. Hence mandate 137# the build to require that ARM_BL31_IN_DRAM is enabled as well. 138ifeq ($(SEPARATE_NOBITS_REGION),1) 139 ifneq ($(ARM_BL31_IN_DRAM),1) 140 $(error For SEPARATE_NOBITS_REGION, ARM_BL31_IN_DRAM must be enabled) 141 endif 142 ifneq ($(RECLAIM_INIT_CODE),0) 143 $(error For SEPARATE_NOBITS_REGION, RECLAIM_INIT_CODE cannot be supported) 144 endif 145endif 146 147# Disable ARM Cryptocell by default 148ARM_CRYPTOCELL_INTEG := 0 149$(eval $(call assert_boolean,ARM_CRYPTOCELL_INTEG)) 150$(eval $(call add_define,ARM_CRYPTOCELL_INTEG)) 151 152# Enable PIE support for RESET_TO_BL31 case 153ifeq (${RESET_TO_BL31},1) 154 ENABLE_PIE := 1 155endif 156 157# CryptoCell integration relies on coherent buffers for passing data from 158# the AP CPU to the CryptoCell 159ifeq (${ARM_CRYPTOCELL_INTEG},1) 160 ifeq (${USE_COHERENT_MEM},0) 161 $(error "ARM_CRYPTOCELL_INTEG needs USE_COHERENT_MEM to be set.") 162 endif 163endif 164 165ifeq (${ARCH}, aarch64) 166PLAT_INCLUDES += -Iinclude/plat/arm/common/aarch64 167endif 168 169PLAT_BL_COMMON_SOURCES += plat/arm/common/${ARCH}/arm_helpers.S \ 170 plat/arm/common/arm_common.c \ 171 plat/arm/common/arm_console.c 172 173ifeq (${ARM_XLAT_TABLES_LIB_V1}, 1) 174PLAT_BL_COMMON_SOURCES += lib/xlat_tables/xlat_tables_common.c \ 175 lib/xlat_tables/${ARCH}/xlat_tables.c 176else 177include lib/xlat_tables_v2/xlat_tables.mk 178 179PLAT_BL_COMMON_SOURCES += ${XLAT_TABLES_LIB_SRCS} 180endif 181 182ARM_IO_SOURCES += plat/arm/common/arm_io_storage.c \ 183 plat/arm/common/fconf/arm_fconf_io.c 184ifeq (${SPD},spmd) 185 ifeq (${SPMD_SPM_AT_SEL2},1) 186 ARM_IO_SOURCES += plat/arm/common/fconf/arm_fconf_sp.c 187 endif 188endif 189 190BL1_SOURCES += drivers/io/io_fip.c \ 191 drivers/io/io_memmap.c \ 192 drivers/io/io_storage.c \ 193 plat/arm/common/arm_bl1_setup.c \ 194 plat/arm/common/arm_err.c \ 195 ${ARM_IO_SOURCES} 196 197ifdef EL3_PAYLOAD_BASE 198# Need the plat_arm_program_trusted_mailbox() function to release secondary CPUs from 199# their holding pen 200BL1_SOURCES += plat/arm/common/arm_pm.c 201endif 202 203BL2_SOURCES += drivers/delay_timer/delay_timer.c \ 204 drivers/delay_timer/generic_delay_timer.c \ 205 drivers/io/io_fip.c \ 206 drivers/io/io_memmap.c \ 207 drivers/io/io_storage.c \ 208 plat/arm/common/arm_bl2_setup.c \ 209 plat/arm/common/arm_err.c \ 210 ${ARM_IO_SOURCES} 211 212# Firmware Configuration Framework sources 213include lib/fconf/fconf.mk 214 215# Add `libfdt` and Arm common helpers required for Dynamic Config 216include lib/libfdt/libfdt.mk 217 218DYN_CFG_SOURCES += plat/arm/common/arm_dyn_cfg.c \ 219 plat/arm/common/arm_dyn_cfg_helpers.c \ 220 common/fdt_wrappers.c 221 222BL1_SOURCES += ${DYN_CFG_SOURCES} 223BL2_SOURCES += ${DYN_CFG_SOURCES} 224 225ifeq (${BL2_AT_EL3},1) 226BL2_SOURCES += plat/arm/common/arm_bl2_el3_setup.c 227endif 228 229# Because BL1/BL2 execute in AArch64 mode but BL32 in AArch32 we need to use 230# the AArch32 descriptors. 231ifeq (${JUNO_AARCH32_EL3_RUNTIME},1) 232BL2_SOURCES += plat/arm/common/aarch32/arm_bl2_mem_params_desc.c 233else 234BL2_SOURCES += plat/arm/common/${ARCH}/arm_bl2_mem_params_desc.c 235endif 236BL2_SOURCES += plat/arm/common/arm_image_load.c \ 237 common/desc_image_load.c 238ifeq (${SPD},opteed) 239BL2_SOURCES += lib/optee/optee_utils.c 240endif 241 242BL2U_SOURCES += drivers/delay_timer/delay_timer.c \ 243 drivers/delay_timer/generic_delay_timer.c \ 244 plat/arm/common/arm_bl2u_setup.c 245 246BL31_SOURCES += plat/arm/common/arm_bl31_setup.c \ 247 plat/arm/common/arm_pm.c \ 248 plat/arm/common/arm_topology.c \ 249 plat/common/plat_psci_common.c 250 251ifeq (${ENABLE_PMF}, 1) 252ifeq (${ARCH}, aarch64) 253BL31_SOURCES += plat/arm/common/aarch64/execution_state_switch.c\ 254 plat/arm/common/arm_sip_svc.c \ 255 lib/pmf/pmf_smc.c 256else 257BL32_SOURCES += plat/arm/common/arm_sip_svc.c \ 258 lib/pmf/pmf_smc.c 259endif 260endif 261 262ifeq (${EL3_EXCEPTION_HANDLING},1) 263BL31_SOURCES += plat/common/aarch64/plat_ehf.c 264endif 265 266ifeq (${SDEI_SUPPORT},1) 267BL31_SOURCES += plat/arm/common/aarch64/arm_sdei.c 268ifeq (${SDEI_IN_FCONF},1) 269BL31_SOURCES += plat/arm/common/fconf/fconf_sdei_getter.c 270endif 271endif 272 273# RAS sources 274ifeq (${RAS_EXTENSION},1) 275BL31_SOURCES += lib/extensions/ras/std_err_record.c \ 276 lib/extensions/ras/ras_common.c 277endif 278 279# Pointer Authentication sources 280ifeq (${ENABLE_PAUTH}, 1) 281PLAT_BL_COMMON_SOURCES += plat/arm/common/aarch64/arm_pauth.c \ 282 lib/extensions/pauth/pauth_helpers.S 283endif 284 285ifeq (${SPD},spmd) 286BL31_SOURCES += plat/common/plat_spmd_manifest.c \ 287 common/fdt_wrappers.c \ 288 ${LIBFDT_SRCS} 289 290endif 291 292ifneq (${TRUSTED_BOARD_BOOT},0) 293 294 # Include common TBB sources 295 AUTH_SOURCES := drivers/auth/auth_mod.c \ 296 drivers/auth/crypto_mod.c \ 297 drivers/auth/img_parser_mod.c \ 298 lib/fconf/fconf_tbbr_getter.c 299 300 # Include the selected chain of trust sources. 301 ifeq (${COT},tbbr) 302 BL1_SOURCES += drivers/auth/tbbr/tbbr_cot_common.c \ 303 drivers/auth/tbbr/tbbr_cot_bl1.c 304 ifneq (${COT_DESC_IN_DTB},0) 305 BL2_SOURCES += lib/fconf/fconf_cot_getter.c 306 else 307 BL2_SOURCES += drivers/auth/tbbr/tbbr_cot_common.c \ 308 drivers/auth/tbbr/tbbr_cot_bl2.c 309 endif 310 else ifeq (${COT},dualroot) 311 AUTH_SOURCES += drivers/auth/dualroot/cot.c 312 else 313 $(error Unknown chain of trust ${COT}) 314 endif 315 316 BL1_SOURCES += ${AUTH_SOURCES} \ 317 bl1/tbbr/tbbr_img_desc.c \ 318 plat/arm/common/arm_bl1_fwu.c \ 319 plat/common/tbbr/plat_tbbr.c 320 321 BL2_SOURCES += ${AUTH_SOURCES} \ 322 plat/common/tbbr/plat_tbbr.c 323 324 $(eval $(call TOOL_ADD_IMG,ns_bl2u,--fwu,FWU_)) 325 326 # We expect to locate the *.mk files under the directories specified below 327ifeq (${ARM_CRYPTOCELL_INTEG},0) 328 CRYPTO_LIB_MK := drivers/auth/mbedtls/mbedtls_crypto.mk 329else 330 CRYPTO_LIB_MK := drivers/auth/cryptocell/cryptocell_crypto.mk 331endif 332 IMG_PARSER_LIB_MK := drivers/auth/mbedtls/mbedtls_x509.mk 333 334 $(info Including ${CRYPTO_LIB_MK}) 335 include ${CRYPTO_LIB_MK} 336 337 $(info Including ${IMG_PARSER_LIB_MK}) 338 include ${IMG_PARSER_LIB_MK} 339 340endif 341 342ifeq (${RECLAIM_INIT_CODE}, 1) 343 ifeq (${ARM_XLAT_TABLES_LIB_V1}, 1) 344 $(error "To reclaim init code xlat tables v2 must be used") 345 endif 346endif 347 348ifeq (${MEASURED_BOOT},1) 349 MEASURED_BOOT_MK := drivers/measured_boot/measured_boot.mk 350 $(info Including ${MEASURED_BOOT_MK}) 351 include ${MEASURED_BOOT_MK} 352endif 353