1 /* 2 * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved. 3 * 4 * SPDX-License-Identifier: BSD-3-Clause 5 */ 6 7 #include <arch_helpers.h> 8 #include <arm_def.h> 9 #include <assert.h> 10 #include <bl_common.h> 11 #include <console.h> 12 #include <debug.h> 13 #include <desc_image_load.h> 14 #include <generic_delay_timer.h> 15 #ifdef SPD_opteed 16 #include <optee_utils.h> 17 #endif 18 #include <plat_arm.h> 19 #include <platform.h> 20 #include <platform_def.h> 21 #include <string.h> 22 #include <utils.h> 23 24 /* Data structure which holds the extents of the trusted SRAM for BL2 */ 25 static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE); 26 27 /* Weak definitions may be overridden in specific ARM standard platform */ 28 #pragma weak bl2_early_platform_setup 29 #pragma weak bl2_platform_setup 30 #pragma weak bl2_plat_arch_setup 31 #pragma weak bl2_plat_sec_mem_layout 32 33 #if LOAD_IMAGE_V2 34 35 #pragma weak bl2_plat_handle_post_image_load 36 37 #else /* LOAD_IMAGE_V2 */ 38 39 /******************************************************************************* 40 * This structure represents the superset of information that is passed to 41 * BL31, e.g. while passing control to it from BL2, bl31_params 42 * and other platform specific params 43 ******************************************************************************/ 44 typedef struct bl2_to_bl31_params_mem { 45 bl31_params_t bl31_params; 46 image_info_t bl31_image_info; 47 image_info_t bl32_image_info; 48 image_info_t bl33_image_info; 49 entry_point_info_t bl33_ep_info; 50 entry_point_info_t bl32_ep_info; 51 entry_point_info_t bl31_ep_info; 52 } bl2_to_bl31_params_mem_t; 53 54 55 static bl2_to_bl31_params_mem_t bl31_params_mem; 56 57 58 /* Weak definitions may be overridden in specific ARM standard platform */ 59 #pragma weak bl2_plat_get_bl31_params 60 #pragma weak bl2_plat_get_bl31_ep_info 61 #pragma weak bl2_plat_flush_bl31_params 62 #pragma weak bl2_plat_set_bl31_ep_info 63 #pragma weak bl2_plat_get_scp_bl2_meminfo 64 #pragma weak bl2_plat_get_bl32_meminfo 65 #pragma weak bl2_plat_set_bl32_ep_info 66 #pragma weak bl2_plat_get_bl33_meminfo 67 #pragma weak bl2_plat_set_bl33_ep_info 68 69 #if ARM_BL31_IN_DRAM 70 meminfo_t *bl2_plat_sec_mem_layout(void) 71 { 72 static meminfo_t bl2_dram_layout 73 __aligned(CACHE_WRITEBACK_GRANULE) = { 74 .total_base = BL31_BASE, 75 .total_size = (ARM_AP_TZC_DRAM1_BASE + 76 ARM_AP_TZC_DRAM1_SIZE) - BL31_BASE, 77 .free_base = BL31_BASE, 78 .free_size = (ARM_AP_TZC_DRAM1_BASE + 79 ARM_AP_TZC_DRAM1_SIZE) - BL31_BASE 80 }; 81 82 return &bl2_dram_layout; 83 } 84 #else 85 meminfo_t *bl2_plat_sec_mem_layout(void) 86 { 87 return &bl2_tzram_layout; 88 } 89 #endif /* ARM_BL31_IN_DRAM */ 90 91 /******************************************************************************* 92 * This function assigns a pointer to the memory that the platform has kept 93 * aside to pass platform specific and trusted firmware related information 94 * to BL31. This memory is allocated by allocating memory to 95 * bl2_to_bl31_params_mem_t structure which is a superset of all the 96 * structure whose information is passed to BL31 97 * NOTE: This function should be called only once and should be done 98 * before generating params to BL31 99 ******************************************************************************/ 100 bl31_params_t *bl2_plat_get_bl31_params(void) 101 { 102 bl31_params_t *bl2_to_bl31_params; 103 104 /* 105 * Initialise the memory for all the arguments that needs to 106 * be passed to BL31 107 */ 108 zeromem(&bl31_params_mem, sizeof(bl2_to_bl31_params_mem_t)); 109 110 /* Assign memory for TF related information */ 111 bl2_to_bl31_params = &bl31_params_mem.bl31_params; 112 SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0); 113 114 /* Fill BL31 related information */ 115 bl2_to_bl31_params->bl31_image_info = &bl31_params_mem.bl31_image_info; 116 SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info, PARAM_IMAGE_BINARY, 117 VERSION_1, 0); 118 119 /* Fill BL32 related information if it exists */ 120 #ifdef BL32_BASE 121 bl2_to_bl31_params->bl32_ep_info = &bl31_params_mem.bl32_ep_info; 122 SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info, PARAM_EP, 123 VERSION_1, 0); 124 bl2_to_bl31_params->bl32_image_info = &bl31_params_mem.bl32_image_info; 125 SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info, PARAM_IMAGE_BINARY, 126 VERSION_1, 0); 127 #endif /* BL32_BASE */ 128 129 /* Fill BL33 related information */ 130 bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem.bl33_ep_info; 131 SET_PARAM_HEAD(bl2_to_bl31_params->bl33_ep_info, 132 PARAM_EP, VERSION_1, 0); 133 134 /* BL33 expects to receive the primary CPU MPID (through x0) */ 135 bl2_to_bl31_params->bl33_ep_info->args.arg0 = 0xffff & read_mpidr(); 136 137 bl2_to_bl31_params->bl33_image_info = &bl31_params_mem.bl33_image_info; 138 SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info, PARAM_IMAGE_BINARY, 139 VERSION_1, 0); 140 141 return bl2_to_bl31_params; 142 } 143 144 /* Flush the TF params and the TF plat params */ 145 void bl2_plat_flush_bl31_params(void) 146 { 147 flush_dcache_range((unsigned long)&bl31_params_mem, 148 sizeof(bl2_to_bl31_params_mem_t)); 149 } 150 151 /******************************************************************************* 152 * This function returns a pointer to the shared memory that the platform 153 * has kept to point to entry point information of BL31 to BL2 154 ******************************************************************************/ 155 struct entry_point_info *bl2_plat_get_bl31_ep_info(void) 156 { 157 #if DEBUG 158 bl31_params_mem.bl31_ep_info.args.arg1 = ARM_BL31_PLAT_PARAM_VAL; 159 #endif 160 161 return &bl31_params_mem.bl31_ep_info; 162 } 163 #endif /* LOAD_IMAGE_V2 */ 164 165 /******************************************************************************* 166 * BL1 has passed the extents of the trusted SRAM that should be visible to BL2 167 * in x0. This memory layout is sitting at the base of the free trusted SRAM. 168 * Copy it to a safe location before its reclaimed by later BL2 functionality. 169 ******************************************************************************/ 170 void arm_bl2_early_platform_setup(meminfo_t *mem_layout) 171 { 172 /* Initialize the console to provide early debug support */ 173 console_init(PLAT_ARM_BOOT_UART_BASE, PLAT_ARM_BOOT_UART_CLK_IN_HZ, 174 ARM_CONSOLE_BAUDRATE); 175 176 /* Setup the BL2 memory layout */ 177 bl2_tzram_layout = *mem_layout; 178 179 /* Initialise the IO layer and register platform IO devices */ 180 plat_arm_io_setup(); 181 } 182 183 void bl2_early_platform_setup(meminfo_t *mem_layout) 184 { 185 arm_bl2_early_platform_setup(mem_layout); 186 generic_delay_timer_init(); 187 } 188 189 /* 190 * Perform ARM standard platform setup. 191 */ 192 void arm_bl2_platform_setup(void) 193 { 194 /* Initialize the secure environment */ 195 plat_arm_security_setup(); 196 } 197 198 void bl2_platform_setup(void) 199 { 200 arm_bl2_platform_setup(); 201 } 202 203 /******************************************************************************* 204 * Perform the very early platform specific architectural setup here. At the 205 * moment this is only initializes the mmu in a quick and dirty way. 206 ******************************************************************************/ 207 void arm_bl2_plat_arch_setup(void) 208 { 209 arm_setup_page_tables(bl2_tzram_layout.total_base, 210 bl2_tzram_layout.total_size, 211 BL_CODE_BASE, 212 BL_CODE_END, 213 BL_RO_DATA_BASE, 214 BL_RO_DATA_END 215 #if USE_COHERENT_MEM 216 , BL_COHERENT_RAM_BASE, 217 BL_COHERENT_RAM_END 218 #endif 219 ); 220 221 #ifdef AARCH32 222 enable_mmu_secure(0); 223 #else 224 enable_mmu_el1(0); 225 #endif 226 } 227 228 void bl2_plat_arch_setup(void) 229 { 230 arm_bl2_plat_arch_setup(); 231 } 232 233 #if LOAD_IMAGE_V2 234 int arm_bl2_handle_post_image_load(unsigned int image_id) 235 { 236 int err = 0; 237 bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id); 238 #ifdef SPD_opteed 239 bl_mem_params_node_t *pager_mem_params = NULL; 240 bl_mem_params_node_t *paged_mem_params = NULL; 241 #endif 242 assert(bl_mem_params); 243 244 switch (image_id) { 245 #ifdef AARCH64 246 case BL32_IMAGE_ID: 247 #ifdef SPD_opteed 248 pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID); 249 assert(pager_mem_params); 250 251 paged_mem_params = get_bl_mem_params_node(BL32_EXTRA2_IMAGE_ID); 252 assert(paged_mem_params); 253 254 err = parse_optee_header(&bl_mem_params->ep_info, 255 &pager_mem_params->image_info, 256 &paged_mem_params->image_info); 257 if (err != 0) { 258 WARN("OPTEE header parse error.\n"); 259 } 260 #endif 261 bl_mem_params->ep_info.spsr = arm_get_spsr_for_bl32_entry(); 262 break; 263 #endif 264 265 case BL33_IMAGE_ID: 266 /* BL33 expects to receive the primary CPU MPID (through r0) */ 267 bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr(); 268 bl_mem_params->ep_info.spsr = arm_get_spsr_for_bl33_entry(); 269 break; 270 271 #ifdef SCP_BL2_BASE 272 case SCP_BL2_IMAGE_ID: 273 /* The subsequent handling of SCP_BL2 is platform specific */ 274 err = plat_arm_bl2_handle_scp_bl2(&bl_mem_params->image_info); 275 if (err) { 276 WARN("Failure in platform-specific handling of SCP_BL2 image.\n"); 277 } 278 break; 279 #endif 280 } 281 282 return err; 283 } 284 285 /******************************************************************************* 286 * This function can be used by the platforms to update/use image 287 * information for given `image_id`. 288 ******************************************************************************/ 289 int bl2_plat_handle_post_image_load(unsigned int image_id) 290 { 291 return arm_bl2_handle_post_image_load(image_id); 292 } 293 294 #else /* LOAD_IMAGE_V2 */ 295 296 /******************************************************************************* 297 * Populate the extents of memory available for loading SCP_BL2 (if used), 298 * i.e. anywhere in trusted RAM as long as it doesn't overwrite BL2. 299 ******************************************************************************/ 300 void bl2_plat_get_scp_bl2_meminfo(meminfo_t *scp_bl2_meminfo) 301 { 302 *scp_bl2_meminfo = bl2_tzram_layout; 303 } 304 305 /******************************************************************************* 306 * Before calling this function BL31 is loaded in memory and its entrypoint 307 * is set by load_image. This is a placeholder for the platform to change 308 * the entrypoint of BL31 and set SPSR and security state. 309 * On ARM standard platforms we only set the security state of the entrypoint 310 ******************************************************************************/ 311 void bl2_plat_set_bl31_ep_info(image_info_t *bl31_image_info, 312 entry_point_info_t *bl31_ep_info) 313 { 314 SET_SECURITY_STATE(bl31_ep_info->h.attr, SECURE); 315 bl31_ep_info->spsr = SPSR_64(MODE_EL3, MODE_SP_ELX, 316 DISABLE_ALL_EXCEPTIONS); 317 } 318 319 320 /******************************************************************************* 321 * Before calling this function BL32 is loaded in memory and its entrypoint 322 * is set by load_image. This is a placeholder for the platform to change 323 * the entrypoint of BL32 and set SPSR and security state. 324 * On ARM standard platforms we only set the security state of the entrypoint 325 ******************************************************************************/ 326 #ifdef BL32_BASE 327 void bl2_plat_set_bl32_ep_info(image_info_t *bl32_image_info, 328 entry_point_info_t *bl32_ep_info) 329 { 330 SET_SECURITY_STATE(bl32_ep_info->h.attr, SECURE); 331 bl32_ep_info->spsr = arm_get_spsr_for_bl32_entry(); 332 } 333 334 /******************************************************************************* 335 * Populate the extents of memory available for loading BL32 336 ******************************************************************************/ 337 void bl2_plat_get_bl32_meminfo(meminfo_t *bl32_meminfo) 338 { 339 /* 340 * Populate the extents of memory available for loading BL32. 341 */ 342 bl32_meminfo->total_base = BL32_BASE; 343 bl32_meminfo->free_base = BL32_BASE; 344 bl32_meminfo->total_size = 345 (TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE; 346 bl32_meminfo->free_size = 347 (TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE; 348 } 349 #endif /* BL32_BASE */ 350 351 /******************************************************************************* 352 * Before calling this function BL33 is loaded in memory and its entrypoint 353 * is set by load_image. This is a placeholder for the platform to change 354 * the entrypoint of BL33 and set SPSR and security state. 355 * On ARM standard platforms we only set the security state of the entrypoint 356 ******************************************************************************/ 357 void bl2_plat_set_bl33_ep_info(image_info_t *image, 358 entry_point_info_t *bl33_ep_info) 359 { 360 SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE); 361 bl33_ep_info->spsr = arm_get_spsr_for_bl33_entry(); 362 } 363 364 /******************************************************************************* 365 * Populate the extents of memory available for loading BL33 366 ******************************************************************************/ 367 void bl2_plat_get_bl33_meminfo(meminfo_t *bl33_meminfo) 368 { 369 bl33_meminfo->total_base = ARM_NS_DRAM1_BASE; 370 bl33_meminfo->total_size = ARM_NS_DRAM1_SIZE; 371 bl33_meminfo->free_base = ARM_NS_DRAM1_BASE; 372 bl33_meminfo->free_size = ARM_NS_DRAM1_SIZE; 373 } 374 375 #endif /* LOAD_IMAGE_V2 */ 376