xref: /rk3399_ARM-atf/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c (revision 51faada71a219a8b94cd8d8e423f0f22e9da4d8f)
1 /*
2  * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
3  *
4  * Redistribution and use in source and binary forms, with or without
5  * modification, are permitted provided that the following conditions are met:
6  *
7  * Redistributions of source code must retain the above copyright notice, this
8  * list of conditions and the following disclaimer.
9  *
10  * Redistributions in binary form must reproduce the above copyright notice,
11  * this list of conditions and the following disclaimer in the documentation
12  * and/or other materials provided with the distribution.
13  *
14  * Neither the name of ARM nor the names of its contributors may be used
15  * to endorse or promote products derived from this software without specific
16  * prior written permission.
17  *
18  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
22  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28  * POSSIBILITY OF SUCH DAMAGE.
29  */
30 
31 #include <bl_common.h>
32 #include <desc_image_load.h>
33 #include <platform.h>
34 #include <platform_def.h>
35 
36 
37 /*******************************************************************************
38  * Following descriptor provides BL image/ep information that gets used
39  * by BL2 to load the images and also subset of this information is
40  * passed to next BL image. The image loading sequence is managed by
41  * populating the images in required loading order. The image execution
42  * sequence is managed by populating the `next_handoff_image_id` with
43  * the next executable image id.
44  ******************************************************************************/
45 static bl_mem_params_node_t bl2_mem_params_descs[] = {
46 #ifdef SCP_BL2_BASE
47 	/* Fill SCP_BL2 related information if it exists */
48     {
49 	    .image_id = SCP_BL2_IMAGE_ID,
50 
51 	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
52 		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
53 
54 	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
55 		    VERSION_2, image_info_t, 0),
56 	    .image_info.image_base = SCP_BL2_BASE,
57 	    .image_info.image_max_size = PLAT_CSS_MAX_SCP_BL2_SIZE,
58 
59 	    .next_handoff_image_id = INVALID_IMAGE_ID,
60     },
61 #endif /* SCP_BL2_BASE */
62 
63 #ifdef EL3_PAYLOAD_BASE
64 	/* Fill EL3 payload related information (BL31 is EL3 payload)*/
65     {
66 	    .image_id = BL31_IMAGE_ID,
67 
68 	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
69 		    VERSION_2, entry_point_info_t,
70 		    SECURE | EXECUTABLE | EP_FIRST_EXE),
71 	    .ep_info.pc = EL3_PAYLOAD_BASE,
72 	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
73 		    DISABLE_ALL_EXCEPTIONS),
74 
75 	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
76 		    VERSION_2, image_info_t,
77 		    IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
78 
79 	    .next_handoff_image_id = INVALID_IMAGE_ID,
80     },
81 
82 #else /* EL3_PAYLOAD_BASE */
83 
84 	/* Fill BL31 related information */
85     {
86 	    .image_id = BL31_IMAGE_ID,
87 
88 	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
89 		    VERSION_2, entry_point_info_t,
90 		    SECURE | EXECUTABLE | EP_FIRST_EXE),
91 	    .ep_info.pc = BL31_BASE,
92 	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
93 		    DISABLE_ALL_EXCEPTIONS),
94 #if DEBUG
95 	    .ep_info.args.arg1 = ARM_BL31_PLAT_PARAM_VAL,
96 #endif
97 
98 	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
99 		    VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
100 	    .image_info.image_base = BL31_BASE,
101 	    .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
102 
103 # ifdef BL32_BASE
104 	    .next_handoff_image_id = BL32_IMAGE_ID,
105 # else
106 	    .next_handoff_image_id = BL33_IMAGE_ID,
107 # endif
108     },
109 
110 # ifdef BL32_BASE
111 	/* Fill BL32 related information */
112     {
113 	    .image_id = BL32_IMAGE_ID,
114 
115 	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
116 		    VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
117 	    .ep_info.pc = BL32_BASE,
118 
119 	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
120 		    VERSION_2, image_info_t, 0),
121 	    .image_info.image_base = BL32_BASE,
122 	    .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
123 
124 	    .next_handoff_image_id = BL33_IMAGE_ID,
125     },
126 # endif /* BL32_BASE */
127 
128 	/* Fill BL33 related information */
129     {
130 	    .image_id = BL33_IMAGE_ID,
131 	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
132 		    VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
133 # ifdef PRELOADED_BL33_BASE
134 	    .ep_info.pc = PRELOADED_BL33_BASE,
135 
136 	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
137 		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
138 # else
139 	    .ep_info.pc = PLAT_ARM_NS_IMAGE_OFFSET,
140 
141 	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
142 		    VERSION_2, image_info_t, 0),
143 	    .image_info.image_base = PLAT_ARM_NS_IMAGE_OFFSET,
144 	    .image_info.image_max_size = ARM_DRAM1_SIZE,
145 # endif /* PRELOADED_BL33_BASE */
146 
147 	    .next_handoff_image_id = INVALID_IMAGE_ID,
148     }
149 #endif /* EL3_PAYLOAD_BASE */
150 };
151 
152 REGISTER_BL_IMAGE_DESCS(bl2_mem_params_descs)
153