1# Copyright (c) 2021-2024, Arm Limited. All rights reserved. 2# 3# SPDX-License-Identifier: BSD-3-Clause 4# 5 6include common/fdt_wrappers.mk 7 8TARGET_FLAVOUR := fvp 9# DPU with SCMI may not necessarily work, so allow its independence 10TC_DPU_USE_SCMI_CLK := 1 11# SCMI power domain control enable 12TC_SCMI_PD_CTRL_EN := 1 13 14# System setup 15CSS_USE_SCMI_SDS_DRIVER := 1 16HW_ASSISTED_COHERENCY := 1 17USE_COHERENT_MEM := 0 18GIC_ENABLE_V4_EXTN := 1 19GICV3_SUPPORT_GIC600 := 1 20override NEED_BL2U := no 21override ARM_PLAT_MT := 1 22 23# CPU setup 24ARM_ARCH_MINOR := 7 25BRANCH_PROTECTION := 1 26ENABLE_FEAT_MPAM := 1 # default is 2, optimise 27ENABLE_SVE_FOR_NS := 2 # to show we use it 28ENABLE_SVE_FOR_SWD := 1 29ENABLE_SME_FOR_NS := 2 30ENABLE_SME2_FOR_NS := 2 31ENABLE_SME_FOR_SWD := 1 32ENABLE_TRBE_FOR_NS := 1 33ENABLE_SYS_REG_TRACE_FOR_NS := 1 34ENABLE_FEAT_AMU := 1 35ENABLE_AMU_FCONF := 1 36ENABLE_AMU_AUXILIARY_COUNTERS := 1 37ENABLE_MPMM := 1 38ENABLE_MPMM_FCONF := 1 39ENABLE_FEAT_MTE2 := 2 40ENABLE_SPE_FOR_NS := 3 41ENABLE_FEAT_TCR2 := 3 42 43CTX_INCLUDE_AARCH32_REGS := 0 44 45ifeq (${SPD},spmd) 46 SPMD_SPM_AT_SEL2 := 1 47 CTX_INCLUDE_PAUTH_REGS := 1 48endif 49 50# TC RESOLUTION - LIST OF VALID OPTIONS (this impacts only FVP) 51TC_RESOLUTION_OPTIONS := 640x480p60 \ 52 1920x1080p60 53# Set default to the 640x480p60 resolution mode 54TC_RESOLUTION ?= $(firstword $(TC_RESOLUTION_OPTIONS)) 55 56# Check resolution option for FVP 57ifneq ($(filter ${TARGET_FLAVOUR}, fvp),) 58ifeq ($(filter ${TC_RESOLUTION}, ${TC_RESOLUTION_OPTIONS}),) 59 $(error TC_RESOLUTION is ${TC_RESOLUTION}, it must be: ${TC_RESOLUTION_OPTIONS}) 60endif 61endif 62 63ifneq ($(shell expr $(TARGET_PLATFORM) \<= 1), 0) 64 $(error Platform ${PLAT}$(TARGET_PLATFORM) is no longer available.) 65endif 66 67ifneq ($(shell expr $(TARGET_PLATFORM) = 2), 0) 68 $(warning Platform ${PLAT}$(TARGET_PLATFORM) is deprecated. \ 69 Some of the features might not work as expected) 70endif 71 72ifeq ($(shell expr $(TARGET_PLATFORM) \<= 4), 0) 73 $(error TARGET_PLATFORM must be less than or equal to 4) 74endif 75 76ifeq ($(filter ${TARGET_FLAVOUR}, fvp fpga),) 77 $(error TARGET_FLAVOUR must be fvp or fpga) 78endif 79 80# Support for loading Android Image to DRAM 81TC_FPGA_ANDROID_IMG_IN_RAM := 0 82 83# Support Loading of FIP image to DRAM 84TC_FPGA_FIP_IMG_IN_RAM := 0 85 86$(eval $(call add_defines, \ 87 TARGET_PLATFORM \ 88 TARGET_FLAVOUR_$(call uppercase,${TARGET_FLAVOUR}) \ 89 TC_RESOLUTION_$(call uppercase,${TC_RESOLUTION}) \ 90 TC_DPU_USE_SCMI_CLK \ 91 TC_SCMI_PD_CTRL_EN \ 92 TC_FPGA_ANDROID_IMG_IN_RAM \ 93 TC_FPGA_FIP_IMG_IN_RAM \ 94)) 95 96CSS_LOAD_SCP_IMAGES := 1 97 98# Save DSU PMU registers on cluster off and restore them on cluster on 99PRESERVE_DSU_PMU_REGS := 1 100 101# Specify MHU type based on platform 102ifneq ($(filter ${TARGET_PLATFORM}, 2),) 103 PLAT_MHU_VERSION := 2 104else 105 PLAT_MHU_VERSION := 3 106endif 107 108# Include GICv3 driver files 109include drivers/arm/gic/v3/gicv3.mk 110 111ENT_GIC_SOURCES := ${GICV3_SOURCES} \ 112 plat/common/plat_gicv3.c \ 113 plat/arm/common/arm_gicv3.c 114 115TC_BASE = plat/arm/board/tc 116 117PLAT_INCLUDES += -I${TC_BASE}/include/ \ 118 -I${TC_BASE}/fdts/ 119 120# CPU libraries for TARGET_PLATFORM=1 121ifeq (${TARGET_PLATFORM}, 1) 122TC_CPU_SOURCES += lib/cpus/aarch64/cortex_a510.S \ 123 lib/cpus/aarch64/cortex_a715.S \ 124 lib/cpus/aarch64/cortex_x3.S 125endif 126 127# CPU libraries for TARGET_PLATFORM=2 128ifeq (${TARGET_PLATFORM}, 2) 129ERRATA_A520_2938996 := 1 130ERRATA_X4_2726228 := 1 131 132TC_CPU_SOURCES += lib/cpus/aarch64/cortex_a520.S \ 133 lib/cpus/aarch64/cortex_a720.S \ 134 lib/cpus/aarch64/cortex_x4.S 135endif 136 137# CPU libraries for TARGET_PLATFORM=3 138ifeq (${TARGET_PLATFORM}, 3) 139ERRATA_A520_2938996 := 1 140 141TC_CPU_SOURCES += lib/cpus/aarch64/cortex_a520.S \ 142 lib/cpus/aarch64/cortex_a725.S \ 143 lib/cpus/aarch64/cortex_x925.S 144endif 145 146# CPU libraries for TARGET_PLATFORM=4 147ifeq (${TARGET_PLATFORM}, 4) 148TC_CPU_SOURCES += lib/cpus/aarch64/cortex_gelas.S \ 149 lib/cpus/aarch64/nevis.S \ 150 lib/cpus/aarch64/travis.S 151endif 152 153INTERCONNECT_SOURCES := ${TC_BASE}/tc_interconnect.c \ 154 plat/arm/common/arm_ni.c 155 156PLAT_BL_COMMON_SOURCES += ${TC_BASE}/tc_plat.c \ 157 ${TC_BASE}/include/tc_helpers.S 158 159BL1_SOURCES += ${INTERCONNECT_SOURCES} \ 160 ${TC_CPU_SOURCES} \ 161 ${TC_BASE}/tc_trusted_boot.c \ 162 ${TC_BASE}/tc_bl1_setup.c \ 163 ${TC_BASE}/tc_err.c \ 164 drivers/arm/sbsa/sbsa.c 165 166BL2_SOURCES += ${TC_BASE}/tc_security.c \ 167 ${TC_BASE}/tc_err.c \ 168 ${TC_BASE}/tc_trusted_boot.c \ 169 ${TC_BASE}/tc_bl2_setup.c \ 170 lib/utils/mem_region.c \ 171 drivers/arm/tzc/tzc400.c \ 172 plat/arm/common/arm_nor_psci_mem_protect.c 173 174ifeq ($(shell test $(TARGET_PLATFORM) -le 2; echo $$?),0) 175BL2_SOURCES += plat/arm/common/arm_tzc400.c 176endif 177 178BL31_SOURCES += ${INTERCONNECT_SOURCES} \ 179 ${TC_CPU_SOURCES} \ 180 ${ENT_GIC_SOURCES} \ 181 ${TC_BASE}/tc_bl31_setup.c \ 182 ${TC_BASE}/tc_topology.c \ 183 lib/fconf/fconf.c \ 184 lib/fconf/fconf_dyn_cfg_getter.c \ 185 drivers/arm/css/dsu/dsu.c \ 186 drivers/cfi/v2m/v2m_flash.c \ 187 lib/utils/mem_region.c \ 188 plat/arm/common/arm_nor_psci_mem_protect.c \ 189 drivers/arm/sbsa/sbsa.c 190 191BL31_SOURCES += ${FDT_WRAPPERS_SOURCES} 192 193# Add the FDT_SOURCES and options for Dynamic Config 194FDT_SOURCES += ${TC_BASE}/fdts/${PLAT}_fw_config.dts \ 195 ${TC_BASE}/fdts/${PLAT}_tb_fw_config.dts \ 196 ${TC_BASE}/fdts/${PLAT}_nt_fw_config.dts 197FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb 198TB_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb 199FVP_NT_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_nt_fw_config.dtb 200 201# Add the FW_CONFIG to FIP and specify the same to certtool 202$(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config,${FW_CONFIG})) 203# Add the TB_FW_CONFIG to FIP and specify the same to certtool 204$(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config,${TB_FW_CONFIG})) 205# Add the NT_FW_CONFIG to FIP and specify the same to certtool 206$(eval $(call TOOL_ADD_PAYLOAD,${FVP_NT_FW_CONFIG},--nt-fw-config,${FVP_NT_FW_CONFIG})) 207 208ifeq (${SPD},spmd) 209ifeq ($(ARM_SPMC_MANIFEST_DTS),) 210ARM_SPMC_MANIFEST_DTS := ${TC_BASE}/fdts/${PLAT}_spmc_test_manifest.dts 211endif 212 213FDT_SOURCES += ${ARM_SPMC_MANIFEST_DTS} 214TC_TOS_FW_CONFIG := ${BUILD_PLAT}/fdts/$(notdir $(basename ${ARM_SPMC_MANIFEST_DTS})).dtb 215 216# Add the TOS_FW_CONFIG to FIP and specify the same to certtool 217$(eval $(call TOOL_ADD_PAYLOAD,${TC_TOS_FW_CONFIG},--tos-fw-config,${TC_TOS_FW_CONFIG})) 218endif 219 220#Device tree 221TC_HW_CONFIG_DTS := fdts/${PLAT}${TARGET_PLATFORM}.dts 222TC_HW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}.dtb 223FDT_SOURCES += ${TC_HW_CONFIG_DTS} 224$(eval TC_HW_CONFIG := ${BUILD_PLAT}/$(patsubst %.dts,%.dtb,$(TC_HW_CONFIG_DTS))) 225 226# Add the HW_CONFIG to FIP and specify the same to certtool 227$(eval $(call TOOL_ADD_PAYLOAD,${TC_HW_CONFIG},--hw-config,${TC_HW_CONFIG})) 228 229# Include Measured Boot makefile before any Crypto library makefile. 230# Crypto library makefile may need default definitions of Measured Boot build 231# flags present in Measured Boot makefile. 232$(info Including rse_comms.mk) 233ifeq (${MEASURED_BOOT},1) 234 $(info Including rse_comms.mk) 235 include drivers/arm/rse/rse_comms.mk 236 237 BL1_SOURCES += ${RSE_COMMS_SOURCES} 238 BL2_SOURCES += ${RSE_COMMS_SOURCES} 239 PLAT_INCLUDES += -Iinclude/lib/psa 240 241 ifeq (${DICE_PROTECTION_ENVIRONMENT},1) 242 $(info Including qcbor.mk) 243 include drivers/measured_boot/rse/qcbor.mk 244 $(info Including dice_prot_env.mk) 245 include drivers/measured_boot/rse/dice_prot_env.mk 246 247 BL1_SOURCES += ${QCBOR_SOURCES} \ 248 ${DPE_SOURCES} \ 249 plat/arm/board/tc/tc_common_dpe.c \ 250 plat/arm/board/tc/tc_bl1_dpe.c \ 251 lib/psa/dice_protection_environment.c \ 252 drivers/arm/css/sds/sds.c \ 253 drivers/delay_timer/delay_timer.c \ 254 drivers/delay_timer/generic_delay_timer.c 255 256 BL2_SOURCES += ${QCBOR_SOURCES} \ 257 ${DPE_SOURCES} \ 258 plat/arm/board/tc/tc_common_dpe.c \ 259 plat/arm/board/tc/tc_bl2_dpe.c \ 260 lib/psa/dice_protection_environment.c 261 262 PLAT_INCLUDES += -I${QCBOR_INCLUDES} \ 263 -Iinclude/lib/dice 264 else 265 $(info Including rse_measured_boot.mk) 266 include drivers/measured_boot/rse/rse_measured_boot.mk 267 268 BL1_SOURCES += ${MEASURED_BOOT_SOURCES} \ 269 plat/arm/board/tc/tc_common_measured_boot.c \ 270 plat/arm/board/tc/tc_bl1_measured_boot.c \ 271 lib/psa/measured_boot.c 272 273 BL2_SOURCES += ${MEASURED_BOOT_SOURCES} \ 274 plat/arm/board/tc/tc_common_measured_boot.c \ 275 plat/arm/board/tc/tc_bl2_measured_boot.c \ 276 lib/psa/measured_boot.c 277 endif 278endif 279 280ifeq (${TRNG_SUPPORT},1) 281 BL31_SOURCES += plat/arm/board/tc/tc_trng.c 282endif 283 284ifneq (${PLATFORM_TEST},) 285 # Add this include as first, before arm_common.mk. This is necessary 286 # because arm_common.mk builds Mbed TLS, and platform_test.mk can 287 # change the list of Mbed TLS files that are to be compiled 288 # (LIBMBEDTLS_SRCS). 289 include plat/arm/board/tc/platform_test.mk 290endif 291 292 293include plat/arm/common/arm_common.mk 294include plat/arm/css/common/css_common.mk 295include plat/arm/board/common/board_common.mk 296