xref: /rk3399_ARM-atf/include/plat/common/platform.h (revision d72c486b52dc654e4216d41dcc1b0f87bdbdf3e9)
1 /*
2  * Copyright (c) 2013-2022, Arm Limited and Contributors. All rights reserved.
3  *
4  * SPDX-License-Identifier: BSD-3-Clause
5  */
6 
7 #ifndef PLATFORM_H
8 #define PLATFORM_H
9 
10 #include <stdint.h>
11 
12 #include <lib/psci/psci.h>
13 #if defined(SPD_spmd)
14  #include <services/spm_core_manifest.h>
15 #endif
16 #if ENABLE_RME
17 #include <services/rmm_core_manifest.h>
18 #endif
19 #if TRNG_SUPPORT
20 #include "plat_trng.h"
21 #endif
22 #include <drivers/fwu/fwu_metadata.h>
23 #if DRTM_SUPPORT
24 #include "plat_drtm.h"
25 #endif /* DRTM_SUPPORT */
26 
27 /*******************************************************************************
28  * Forward declarations
29  ******************************************************************************/
30 struct auth_img_desc_s;
31 struct meminfo;
32 struct image_info;
33 struct entry_point_info;
34 struct image_desc;
35 struct bl_load_info;
36 struct bl_params;
37 struct mmap_region;
38 struct spm_mm_boot_info;
39 struct sp_res_desc;
40 enum fw_enc_status_t;
41 
42 /*******************************************************************************
43  * plat_get_rotpk_info() flags
44  ******************************************************************************/
45 #define ROTPK_IS_HASH			(1 << 0)
46 /* Flag used to skip verification of the certificate ROTPK while the platform
47    ROTPK is not deployed */
48 #define ROTPK_NOT_DEPLOYED		(1 << 1)
49 
50 /*******************************************************************************
51  * plat_get_enc_key_info() flags
52  ******************************************************************************/
53 /*
54  * Flag used to notify caller that information provided in key buffer is an
55  * identifier rather than an actual key.
56  */
57 #define ENC_KEY_IS_IDENTIFIER		(1 << 0)
58 
59 /*******************************************************************************
60  * Function declarations
61  ******************************************************************************/
62 /*******************************************************************************
63  * Mandatory common functions
64  ******************************************************************************/
65 unsigned int plat_get_syscnt_freq2(void);
66 
67 int plat_get_image_source(unsigned int image_id,
68 			uintptr_t *dev_handle,
69 			uintptr_t *image_spec);
70 uintptr_t plat_get_ns_image_entrypoint(void);
71 unsigned int plat_my_core_pos(void);
72 int plat_core_pos_by_mpidr(u_register_t mpidr);
73 int plat_get_mbedtls_heap(void **heap_addr, size_t *heap_size);
74 
75 #if STACK_PROTECTOR_ENABLED
76 /*
77  * Return a new value to be used for the stack protection's canary.
78  *
79  * Ideally, this value is a random number that is impossible to predict by an
80  * attacker.
81  */
82 u_register_t plat_get_stack_protector_canary(void);
83 #endif /* STACK_PROTECTOR_ENABLED */
84 
85 /*******************************************************************************
86  * Mandatory interrupt management functions
87  ******************************************************************************/
88 uint32_t plat_ic_get_pending_interrupt_id(void);
89 uint32_t plat_ic_get_pending_interrupt_type(void);
90 uint32_t plat_ic_acknowledge_interrupt(void);
91 uint32_t plat_ic_get_interrupt_type(uint32_t id);
92 void plat_ic_end_of_interrupt(uint32_t id);
93 uint32_t plat_interrupt_type_to_line(uint32_t type,
94 				     uint32_t security_state);
95 
96 /*******************************************************************************
97  * Optional interrupt management functions, depending on chosen EL3 components.
98  ******************************************************************************/
99 unsigned int plat_ic_get_running_priority(void);
100 int plat_ic_is_spi(unsigned int id);
101 int plat_ic_is_ppi(unsigned int id);
102 int plat_ic_is_sgi(unsigned int id);
103 unsigned int plat_ic_get_interrupt_active(unsigned int id);
104 void plat_ic_disable_interrupt(unsigned int id);
105 void plat_ic_enable_interrupt(unsigned int id);
106 int plat_ic_has_interrupt_type(unsigned int type);
107 void plat_ic_set_interrupt_type(unsigned int id, unsigned int type);
108 void plat_ic_set_interrupt_priority(unsigned int id, unsigned int priority);
109 void plat_ic_raise_el3_sgi(int sgi_num, u_register_t target);
110 void plat_ic_raise_ns_sgi(int sgi_num, u_register_t target);
111 void plat_ic_raise_s_el1_sgi(int sgi_num, u_register_t target);
112 void plat_ic_set_spi_routing(unsigned int id, unsigned int routing_mode,
113 		u_register_t mpidr);
114 void plat_ic_set_interrupt_pending(unsigned int id);
115 void plat_ic_clear_interrupt_pending(unsigned int id);
116 unsigned int plat_ic_set_priority_mask(unsigned int mask);
117 unsigned int plat_ic_get_interrupt_id(unsigned int raw);
118 
119 /*******************************************************************************
120  * Optional common functions (may be overridden)
121  ******************************************************************************/
122 uintptr_t plat_get_my_stack(void);
123 void plat_report_exception(unsigned int exception_type);
124 void plat_report_prefetch_abort(unsigned int fault_address);
125 void plat_report_data_abort(unsigned int fault_address);
126 int plat_crash_console_init(void);
127 int plat_crash_console_putc(int c);
128 void plat_crash_console_flush(void);
129 void plat_error_handler(int err) __dead2;
130 void plat_panic_handler(void) __dead2;
131 const char *plat_log_get_prefix(unsigned int log_level);
132 void bl2_plat_preload_setup(void);
133 int plat_try_next_boot_source(void);
134 
135 #if MEASURED_BOOT
136 int plat_mboot_measure_image(unsigned int image_id, image_info_t *image_data);
137 int plat_mboot_measure_critical_data(unsigned int critical_data_id,
138 				     const void *base,
139 				     size_t size);
140 #else
141 static inline int plat_mboot_measure_image(unsigned int image_id __unused,
142 					   image_info_t *image_data __unused)
143 {
144 	return 0;
145 }
146 static inline int plat_mboot_measure_critical_data(
147 					unsigned int critical_data_id __unused,
148 					const void *base __unused,
149 					size_t size __unused)
150 {
151 	return 0;
152 }
153 #endif /* MEASURED_BOOT */
154 
155 /*******************************************************************************
156  * Mandatory BL1 functions
157  ******************************************************************************/
158 void bl1_early_platform_setup(void);
159 void bl1_plat_arch_setup(void);
160 void bl1_platform_setup(void);
161 struct meminfo *bl1_plat_sec_mem_layout(void);
162 
163 /*******************************************************************************
164  * Optional EL3 component functions in BL31
165  ******************************************************************************/
166 
167 /* SDEI platform functions */
168 #if SDEI_SUPPORT
169 void plat_sdei_setup(void);
170 int plat_sdei_validate_entry_point(uintptr_t ep, unsigned int client_mode);
171 void plat_sdei_handle_masked_trigger(uint64_t mpidr, unsigned int intr);
172 #endif
173 
174 void plat_default_ea_handler(unsigned int ea_reason, uint64_t syndrome, void *cookie,
175 		void *handle, uint64_t flags);
176 void plat_ea_handler(unsigned int ea_reason, uint64_t syndrome, void *cookie,
177 		void *handle, uint64_t flags);
178 
179 /*
180  * The following function is mandatory when the
181  * firmware update feature is used.
182  */
183 int bl1_plat_mem_check(uintptr_t mem_base, unsigned int mem_size,
184 		unsigned int flags);
185 
186 /*******************************************************************************
187  * Optional BL1 functions (may be overridden)
188  ******************************************************************************/
189 /*
190  * The following functions are used for image loading process in BL1.
191  */
192 void bl1_plat_set_ep_info(unsigned int image_id,
193 		struct entry_point_info *ep_info);
194 /*
195  * The following functions are mandatory when firmware update
196  * feature is used and optional otherwise.
197  */
198 unsigned int bl1_plat_get_next_image_id(void);
199 struct image_desc *bl1_plat_get_image_desc(unsigned int image_id);
200 
201 /*
202  * The following functions are used by firmware update
203  * feature and may optionally be overridden.
204  */
205 __dead2 void bl1_plat_fwu_done(void *client_cookie, void *reserved);
206 
207 /*
208  * This BL1 function can be used by the platforms to update/use image
209  * information for a given `image_id`.
210  */
211 int bl1_plat_handle_pre_image_load(unsigned int image_id);
212 int bl1_plat_handle_post_image_load(unsigned int image_id);
213 
214 #if MEASURED_BOOT
215 void bl1_plat_mboot_init(void);
216 void bl1_plat_mboot_finish(void);
217 #else
218 static inline void bl1_plat_mboot_init(void)
219 {
220 }
221 static inline void bl1_plat_mboot_finish(void)
222 {
223 }
224 #endif /* MEASURED_BOOT */
225 
226 /*******************************************************************************
227  * Mandatory BL2 functions
228  ******************************************************************************/
229 void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1, u_register_t arg2, u_register_t arg3);
230 void bl2_plat_arch_setup(void);
231 void bl2_platform_setup(void);
232 struct meminfo *bl2_plat_sec_mem_layout(void);
233 
234 /*
235  * This function can be used by the platforms to update/use image
236  * information for given `image_id`.
237  */
238 int bl2_plat_handle_pre_image_load(unsigned int image_id);
239 int bl2_plat_handle_post_image_load(unsigned int image_id);
240 
241 /*******************************************************************************
242  * Optional BL2 functions (may be overridden)
243  ******************************************************************************/
244 #if MEASURED_BOOT
245 void bl2_plat_mboot_init(void);
246 void bl2_plat_mboot_finish(void);
247 #else
248 static inline void bl2_plat_mboot_init(void)
249 {
250 }
251 static inline void bl2_plat_mboot_finish(void)
252 {
253 }
254 #endif /* MEASURED_BOOT */
255 
256 /*******************************************************************************
257  * Mandatory BL2 at EL3 functions: Must be implemented if BL2_AT_EL3 image is
258  * supported
259  ******************************************************************************/
260 void bl2_el3_early_platform_setup(u_register_t arg0, u_register_t arg1,
261 				  u_register_t arg2, u_register_t arg3);
262 void bl2_el3_plat_arch_setup(void);
263 
264 /*******************************************************************************
265  * Optional BL2 at EL3 functions (may be overridden)
266  ******************************************************************************/
267 void bl2_el3_plat_prepare_exit(void);
268 
269 /*******************************************************************************
270  * Mandatory BL2U functions.
271  ******************************************************************************/
272 void bl2u_early_platform_setup(struct meminfo *mem_layout,
273 		void *plat_info);
274 void bl2u_plat_arch_setup(void);
275 void bl2u_platform_setup(void);
276 
277 /*******************************************************************************
278  * Conditionally mandatory BL2U functions for CSS platforms.
279  ******************************************************************************/
280 /*
281  * This function is used to perform any platform-specific actions required to
282  * handle the BL2U_SCP firmware.
283  */
284 int bl2u_plat_handle_scp_bl2u(void);
285 
286 /*******************************************************************************
287  * Mandatory BL31 functions
288  ******************************************************************************/
289 void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
290 		u_register_t arg2, u_register_t arg3);
291 void bl31_plat_arch_setup(void);
292 void bl31_platform_setup(void);
293 void bl31_plat_runtime_setup(void);
294 struct entry_point_info *bl31_plat_get_next_image_ep_info(uint32_t type);
295 
296 /*******************************************************************************
297  * Mandatory PSCI functions (BL31)
298  ******************************************************************************/
299 int plat_setup_psci_ops(uintptr_t sec_entrypoint,
300 			const struct plat_psci_ops **psci_ops);
301 const unsigned char *plat_get_power_domain_tree_desc(void);
302 
303 /*******************************************************************************
304  * Optional PSCI functions (BL31).
305  ******************************************************************************/
306 void plat_psci_stat_accounting_start(const psci_power_state_t *state_info);
307 void plat_psci_stat_accounting_stop(const psci_power_state_t *state_info);
308 u_register_t plat_psci_stat_get_residency(unsigned int lvl,
309 			const psci_power_state_t *state_info,
310 			unsigned int last_cpu_idx);
311 plat_local_state_t plat_get_target_pwr_state(unsigned int lvl,
312 			const plat_local_state_t *states,
313 			unsigned int ncpu);
314 
315 /*******************************************************************************
316  * Mandatory BL31 functions when ENABLE_RME=1
317  ******************************************************************************/
318 #if ENABLE_RME
319 int plat_rmmd_get_cca_attest_token(uintptr_t buf, size_t *len,
320 				   uintptr_t hash, size_t hash_size);
321 int plat_rmmd_get_cca_realm_attest_key(uintptr_t buf, size_t *len,
322 				       unsigned int type);
323 size_t plat_rmmd_get_el3_rmm_shared_mem(uintptr_t *shared);
324 int plat_rmmd_load_manifest(rmm_manifest_t *manifest);
325 #endif
326 
327 /*******************************************************************************
328  * Optional BL31 functions (may be overridden)
329  ******************************************************************************/
330 void bl31_plat_enable_mmu(uint32_t flags);
331 
332 /*******************************************************************************
333  * Optional BL32 functions (may be overridden)
334  ******************************************************************************/
335 void bl32_plat_enable_mmu(uint32_t flags);
336 
337 /*******************************************************************************
338  * Trusted Board Boot functions
339  ******************************************************************************/
340 int plat_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len,
341 			unsigned int *flags);
342 int plat_get_nv_ctr(void *cookie, unsigned int *nv_ctr);
343 int plat_set_nv_ctr(void *cookie, unsigned int nv_ctr);
344 int plat_set_nv_ctr2(void *cookie, const struct auth_img_desc_s *img_desc,
345 		unsigned int nv_ctr);
346 int get_mbedtls_heap_helper(void **heap_addr, size_t *heap_size);
347 int plat_get_enc_key_info(enum fw_enc_status_t fw_enc_status, uint8_t *key,
348 			  size_t *key_len, unsigned int *flags,
349 			  const uint8_t *img_id, size_t img_id_len);
350 
351 /*******************************************************************************
352  * Secure Partitions functions
353  ******************************************************************************/
354 const struct mmap_region *plat_get_secure_partition_mmap(void *cookie);
355 const struct spm_mm_boot_info *plat_get_secure_partition_boot_info(
356 		void *cookie);
357 int plat_spm_sp_rd_load(struct sp_res_desc *rd, const void *ptr, size_t size);
358 int plat_spm_sp_get_next_address(void **sp_base, size_t *sp_size,
359 				 void **rd_base, size_t *rd_size);
360 #if defined(SPD_spmd)
361 int plat_spm_core_manifest_load(spmc_manifest_attribute_t *manifest,
362 				const void *pm_addr);
363 #endif
364 #if defined(SPMC_AT_EL3)
365 int plat_spmc_shmem_datastore_get(uint8_t **datastore, size_t *size);
366 #endif
367 
368 /*******************************************************************************
369  * Mandatory BL image load functions(may be overridden).
370  ******************************************************************************/
371 /*
372  * This function returns pointer to the list of images that the
373  * platform has populated to load.
374  */
375 struct bl_load_info *plat_get_bl_image_load_info(void);
376 
377 /*
378  * This function returns a pointer to the shared memory that the
379  * platform has kept aside to pass trusted firmware related
380  * information that next BL image could need.
381  */
382 struct bl_params *plat_get_next_bl_params(void);
383 
384 /*
385  * This function flushes to main memory all the params that are
386  * passed to next image.
387  */
388 void plat_flush_next_bl_params(void);
389 
390 /*
391  * The below function enable Trusted Firmware components like SPDs which
392  * haven't migrated to the new platform API to compile on platforms which
393  * have the compatibility layer disabled.
394  */
395 unsigned int platform_core_pos_helper(unsigned long mpidr);
396 
397 /*
398  * Optional function to get SOC version
399  */
400 int32_t plat_get_soc_version(void);
401 
402 /*
403  * Optional function to get SOC revision
404  */
405 int32_t plat_get_soc_revision(void);
406 
407 /*
408  * Optional function to check for SMCCC function availability for platform
409  */
410 int32_t plat_is_smccc_feature_available(u_register_t fid);
411 
412 /*******************************************************************************
413  * FWU platform specific functions
414  ******************************************************************************/
415 int plat_fwu_set_metadata_image_source(unsigned int image_id,
416 				       uintptr_t *dev_handle,
417 				       uintptr_t *image_spec);
418 void plat_fwu_set_images_source(const struct fwu_metadata *metadata);
419 uint32_t plat_fwu_get_boot_idx(void);
420 
421 #endif /* PLATFORM_H */
422