xref: /rk3399_ARM-atf/include/plat/common/platform.h (revision bd0c34778174aa4239ff96b448d0b6e1deeec4e2)
1 /*
2  * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
3  *
4  * SPDX-License-Identifier: BSD-3-Clause
5  */
6 
7 #ifndef __PLATFORM_H__
8 #define __PLATFORM_H__
9 
10 #include <psci.h>
11 #include <stdint.h>
12 #include <types.h>
13 
14 
15 /*******************************************************************************
16  * Forward declarations
17  ******************************************************************************/
18 struct auth_img_desc_s;
19 struct meminfo;
20 struct image_info;
21 struct entry_point_info;
22 struct bl31_params;
23 struct image_desc;
24 struct bl_load_info;
25 struct bl_params;
26 
27 /*******************************************************************************
28  * plat_get_rotpk_info() flags
29  ******************************************************************************/
30 #define ROTPK_IS_HASH			(1 << 0)
31 /* Flag used to skip verification of the certificate ROTPK while the platform
32    ROTPK is not deployed */
33 #define ROTPK_NOT_DEPLOYED		(1 << 1)
34 
35 /*******************************************************************************
36  * Function declarations
37  ******************************************************************************/
38 /*******************************************************************************
39  * Mandatory common functions
40  ******************************************************************************/
41 unsigned long long plat_get_syscnt_freq(void) __deprecated;
42 unsigned int plat_get_syscnt_freq2(void);
43 
44 int plat_get_image_source(unsigned int image_id,
45 			uintptr_t *dev_handle,
46 			uintptr_t *image_spec);
47 uintptr_t plat_get_ns_image_entrypoint(void);
48 unsigned int plat_my_core_pos(void);
49 int plat_core_pos_by_mpidr(u_register_t mpidr);
50 
51 #if STACK_PROTECTOR_ENABLED
52 /*
53  * Return a new value to be used for the stack protection's canary.
54  *
55  * Ideally, this value is a random number that is impossible to predict by an
56  * attacker.
57  */
58 u_register_t plat_get_stack_protector_canary(void);
59 #endif /* STACK_PROTECTOR_ENABLED */
60 
61 /*******************************************************************************
62  * Mandatory interrupt management functions
63  ******************************************************************************/
64 uint32_t plat_ic_get_pending_interrupt_id(void);
65 uint32_t plat_ic_get_pending_interrupt_type(void);
66 uint32_t plat_ic_acknowledge_interrupt(void);
67 uint32_t plat_ic_get_interrupt_type(uint32_t id);
68 void plat_ic_end_of_interrupt(uint32_t id);
69 uint32_t plat_interrupt_type_to_line(uint32_t type,
70 				     uint32_t security_state);
71 
72 /*******************************************************************************
73  * Optional interrupt management functions, depending on chosen EL3 components.
74  ******************************************************************************/
75 unsigned int plat_ic_get_running_priority(void);
76 int plat_ic_is_spi(unsigned int id);
77 int plat_ic_is_ppi(unsigned int id);
78 int plat_ic_is_sgi(unsigned int id);
79 unsigned int plat_ic_get_interrupt_active(unsigned int id);
80 void plat_ic_disable_interrupt(unsigned int id);
81 void plat_ic_enable_interrupt(unsigned int id);
82 int plat_ic_has_interrupt_type(unsigned int type);
83 void plat_ic_set_interrupt_type(unsigned int id, unsigned int type);
84 void plat_ic_set_interrupt_priority(unsigned int id, unsigned int priority);
85 void plat_ic_raise_el3_sgi(int sgi_num, u_register_t target);
86 void plat_ic_set_spi_routing(unsigned int id, unsigned int routing_mode,
87 		u_register_t mpidr);
88 void plat_ic_set_interrupt_pending(unsigned int id);
89 void plat_ic_clear_interrupt_pending(unsigned int id);
90 unsigned int plat_ic_set_priority_mask(unsigned int mask);
91 
92 /*******************************************************************************
93  * Optional common functions (may be overridden)
94  ******************************************************************************/
95 uintptr_t plat_get_my_stack(void);
96 void plat_report_exception(unsigned int exception_type);
97 int plat_crash_console_init(void);
98 int plat_crash_console_putc(int c);
99 int plat_crash_console_flush(void);
100 void plat_error_handler(int err) __dead2;
101 void plat_panic_handler(void) __dead2;
102 const char *plat_log_get_prefix(unsigned int log_level);
103 
104 /*******************************************************************************
105  * Mandatory BL1 functions
106  ******************************************************************************/
107 void bl1_early_platform_setup(void);
108 void bl1_plat_arch_setup(void);
109 void bl1_platform_setup(void);
110 struct meminfo *bl1_plat_sec_mem_layout(void);
111 
112 /*
113  * The following function is mandatory when the
114  * firmware update feature is used.
115  */
116 int bl1_plat_mem_check(uintptr_t mem_base, unsigned int mem_size,
117 		unsigned int flags);
118 
119 /*******************************************************************************
120  * Optional BL1 functions (may be overridden)
121  ******************************************************************************/
122 void bl1_init_bl2_mem_layout(const struct meminfo *bl1_mem_layout,
123 			     struct meminfo *bl2_mem_layout);
124 
125 /*
126  * The following functions are used for image loading process in BL1.
127  */
128 void bl1_plat_set_ep_info(unsigned int image_id,
129 		struct entry_point_info *ep_info);
130 /*
131  * The following functions are mandatory when firmware update
132  * feature is used and optional otherwise.
133  */
134 unsigned int bl1_plat_get_next_image_id(void);
135 struct image_desc *bl1_plat_get_image_desc(unsigned int image_id);
136 
137 /*
138  * The following functions are used by firmware update
139  * feature and may optionally be overridden.
140  */
141 __dead2 void bl1_plat_fwu_done(void *client_cookie, void *reserved);
142 
143 
144 /*******************************************************************************
145  * Mandatory BL2 functions
146  ******************************************************************************/
147 void bl2_early_platform_setup(struct meminfo *mem_layout);
148 void bl2_plat_arch_setup(void);
149 void bl2_platform_setup(void);
150 struct meminfo *bl2_plat_sec_mem_layout(void);
151 
152 #if LOAD_IMAGE_V2
153 /*
154  * This function can be used by the platforms to update/use image
155  * information for given `image_id`.
156  */
157 int bl2_plat_handle_post_image_load(unsigned int image_id);
158 
159 #else /* LOAD_IMAGE_V2 */
160 
161 /*
162  * This function returns a pointer to the shared memory that the platform has
163  * kept aside to pass trusted firmware related information that BL31
164  * could need
165  */
166 struct bl31_params *bl2_plat_get_bl31_params(void);
167 
168 /*
169  * This function returns a pointer to the shared memory that the platform
170  * has kept to point to entry point information of BL31 to BL2
171  */
172 struct entry_point_info *bl2_plat_get_bl31_ep_info(void);
173 
174 /*
175  * This function flushes to main memory all the params that are
176  * passed to BL31
177  */
178 void bl2_plat_flush_bl31_params(void);
179 
180 /*
181  * The next 2 functions allow the platform to change the entrypoint information
182  * for the mandatory 3rd level BL images, BL31 and BL33. This is done after
183  * BL2 has loaded those images into memory but before BL31 is executed.
184  */
185 void bl2_plat_set_bl31_ep_info(struct image_info *image,
186 			       struct entry_point_info *ep);
187 
188 void bl2_plat_set_bl33_ep_info(struct image_info *image,
189 			       struct entry_point_info *ep);
190 
191 /* Gets the memory layout for BL33 */
192 void bl2_plat_get_bl33_meminfo(struct meminfo *mem_info);
193 
194 /*******************************************************************************
195  * Conditionally mandatory BL2 functions: must be implemented if SCP_BL2 image
196  * is supported
197  ******************************************************************************/
198 /* Gets the memory layout for SCP_BL2 */
199 void bl2_plat_get_scp_bl2_meminfo(struct meminfo *mem_info);
200 
201 /*
202  * This function is called after loading SCP_BL2 image and it is used to perform
203  * any platform-specific actions required to handle the SCP firmware.
204  */
205 int bl2_plat_handle_scp_bl2(struct image_info *scp_bl2_image_info);
206 
207 /*******************************************************************************
208  * Conditionally mandatory BL2 functions: must be implemented if BL32 image
209  * is supported
210  ******************************************************************************/
211 void bl2_plat_set_bl32_ep_info(struct image_info *image,
212 			       struct entry_point_info *ep);
213 
214 /* Gets the memory layout for BL32 */
215 void bl2_plat_get_bl32_meminfo(struct meminfo *mem_info);
216 
217 #endif /* LOAD_IMAGE_V2 */
218 
219 /*******************************************************************************
220  * Optional BL2 functions (may be overridden)
221  ******************************************************************************/
222 
223 /*******************************************************************************
224  * Mandatory BL2U functions.
225  ******************************************************************************/
226 void bl2u_early_platform_setup(struct meminfo *mem_layout,
227 		void *plat_info);
228 void bl2u_plat_arch_setup(void);
229 void bl2u_platform_setup(void);
230 
231 /*******************************************************************************
232  * Conditionally mandatory BL2U functions for CSS platforms.
233  ******************************************************************************/
234 /*
235  * This function is used to perform any platform-specific actions required to
236  * handle the BL2U_SCP firmware.
237  */
238 int bl2u_plat_handle_scp_bl2u(void);
239 
240 /*******************************************************************************
241  * Mandatory BL31 functions
242  ******************************************************************************/
243 #if LOAD_IMAGE_V2
244 void bl31_early_platform_setup(void *from_bl2,
245 				void *plat_params_from_bl2);
246 #else
247 void bl31_early_platform_setup(struct bl31_params *from_bl2,
248 				void *plat_params_from_bl2);
249 #endif
250 void bl31_plat_arch_setup(void);
251 void bl31_platform_setup(void);
252 void bl31_plat_runtime_setup(void);
253 struct entry_point_info *bl31_plat_get_next_image_ep_info(uint32_t type);
254 
255 /*******************************************************************************
256  * Mandatory PSCI functions (BL31)
257  ******************************************************************************/
258 int plat_setup_psci_ops(uintptr_t sec_entrypoint,
259 			const struct plat_psci_ops **);
260 const unsigned char *plat_get_power_domain_tree_desc(void);
261 
262 /*******************************************************************************
263  * Optional PSCI functions (BL31).
264  ******************************************************************************/
265 void plat_psci_stat_accounting_start(const psci_power_state_t *state_info);
266 void plat_psci_stat_accounting_stop(const psci_power_state_t *state_info);
267 u_register_t plat_psci_stat_get_residency(unsigned int lvl,
268 			const psci_power_state_t *state_info,
269 			int last_cpu_index);
270 plat_local_state_t plat_get_target_pwr_state(unsigned int lvl,
271 			const plat_local_state_t *states,
272 			unsigned int ncpu);
273 
274 /*******************************************************************************
275  * Optional BL31 functions (may be overridden)
276  ******************************************************************************/
277 void bl31_plat_enable_mmu(uint32_t flags);
278 
279 /*******************************************************************************
280  * Optional BL32 functions (may be overridden)
281  ******************************************************************************/
282 void bl32_plat_enable_mmu(uint32_t flags);
283 
284 /*******************************************************************************
285  * Trusted Board Boot functions
286  ******************************************************************************/
287 int plat_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len,
288 			unsigned int *flags);
289 int plat_get_nv_ctr(void *cookie, unsigned int *nv_ctr);
290 int plat_set_nv_ctr(void *cookie, unsigned int nv_ctr);
291 int plat_set_nv_ctr2(void *cookie, const struct auth_img_desc_s *img_desc,
292 		unsigned int nv_ctr);
293 
294 #if LOAD_IMAGE_V2
295 /*******************************************************************************
296  * Mandatory BL image load functions(may be overridden).
297  ******************************************************************************/
298 /*
299  * This function returns pointer to the list of images that the
300  * platform has populated to load.
301  */
302 struct bl_load_info *plat_get_bl_image_load_info(void);
303 
304 /*
305  * This function returns a pointer to the shared memory that the
306  * platform has kept aside to pass trusted firmware related
307  * information that next BL image could need.
308  */
309 struct bl_params *plat_get_next_bl_params(void);
310 
311 /*
312  * This function flushes to main memory all the params that are
313  * passed to next image.
314  */
315 void plat_flush_next_bl_params(void);
316 
317 #endif /* LOAD_IMAGE_V2 */
318 
319 #if ENABLE_PLAT_COMPAT
320 /*
321  * The below declarations are to enable compatibility for the platform ports
322  * using the old platform interface.
323  */
324 
325 /*******************************************************************************
326  * Optional common functions (may be overridden)
327  ******************************************************************************/
328 unsigned int platform_get_core_pos(unsigned long mpidr);
329 
330 /*******************************************************************************
331  * Mandatory PSCI Compatibility functions (BL31)
332  ******************************************************************************/
333 int platform_setup_pm(const plat_pm_ops_t **);
334 
335 unsigned int plat_get_aff_count(unsigned int, unsigned long);
336 unsigned int plat_get_aff_state(unsigned int, unsigned long);
337 #else /* __ENABLE_PLAT_COMPAT__ */
338 /*
339  * The below function enable Trusted Firmware components like SPDs which
340  * haven't migrated to the new platform API to compile on platforms which
341  * have the compatibility layer disabled.
342  */
343 unsigned int platform_get_core_pos(unsigned long mpidr) __deprecated;
344 
345 #endif /* __ENABLE_PLAT_COMPAT__ */
346 
347 #endif /* __PLATFORM_H__ */
348 
349