1 /* 2 * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved. 3 * 4 * SPDX-License-Identifier: BSD-3-Clause 5 */ 6 7 #ifndef __PLATFORM_H__ 8 #define __PLATFORM_H__ 9 10 #include <psci.h> 11 #include <stdint.h> 12 #include <types.h> 13 14 15 /******************************************************************************* 16 * Forward declarations 17 ******************************************************************************/ 18 struct auth_img_desc_s; 19 struct meminfo; 20 struct image_info; 21 struct entry_point_info; 22 struct bl31_params; 23 struct image_desc; 24 struct bl_load_info; 25 struct bl_params; 26 struct mmap_region; 27 struct secure_partition_boot_info; 28 29 /******************************************************************************* 30 * plat_get_rotpk_info() flags 31 ******************************************************************************/ 32 #define ROTPK_IS_HASH (1 << 0) 33 /* Flag used to skip verification of the certificate ROTPK while the platform 34 ROTPK is not deployed */ 35 #define ROTPK_NOT_DEPLOYED (1 << 1) 36 37 /******************************************************************************* 38 * Function declarations 39 ******************************************************************************/ 40 /******************************************************************************* 41 * Mandatory common functions 42 ******************************************************************************/ 43 unsigned long long plat_get_syscnt_freq(void) __deprecated; 44 unsigned int plat_get_syscnt_freq2(void); 45 46 int plat_get_image_source(unsigned int image_id, 47 uintptr_t *dev_handle, 48 uintptr_t *image_spec); 49 uintptr_t plat_get_ns_image_entrypoint(void); 50 unsigned int plat_my_core_pos(void); 51 int plat_core_pos_by_mpidr(u_register_t mpidr); 52 53 #if STACK_PROTECTOR_ENABLED 54 /* 55 * Return a new value to be used for the stack protection's canary. 56 * 57 * Ideally, this value is a random number that is impossible to predict by an 58 * attacker. 59 */ 60 u_register_t plat_get_stack_protector_canary(void); 61 #endif /* STACK_PROTECTOR_ENABLED */ 62 63 /******************************************************************************* 64 * Mandatory interrupt management functions 65 ******************************************************************************/ 66 uint32_t plat_ic_get_pending_interrupt_id(void); 67 uint32_t plat_ic_get_pending_interrupt_type(void); 68 uint32_t plat_ic_acknowledge_interrupt(void); 69 uint32_t plat_ic_get_interrupt_type(uint32_t id); 70 void plat_ic_end_of_interrupt(uint32_t id); 71 uint32_t plat_interrupt_type_to_line(uint32_t type, 72 uint32_t security_state); 73 74 /******************************************************************************* 75 * Optional interrupt management functions, depending on chosen EL3 components. 76 ******************************************************************************/ 77 unsigned int plat_ic_get_running_priority(void); 78 int plat_ic_is_spi(unsigned int id); 79 int plat_ic_is_ppi(unsigned int id); 80 int plat_ic_is_sgi(unsigned int id); 81 unsigned int plat_ic_get_interrupt_active(unsigned int id); 82 void plat_ic_disable_interrupt(unsigned int id); 83 void plat_ic_enable_interrupt(unsigned int id); 84 int plat_ic_has_interrupt_type(unsigned int type); 85 void plat_ic_set_interrupt_type(unsigned int id, unsigned int type); 86 void plat_ic_set_interrupt_priority(unsigned int id, unsigned int priority); 87 void plat_ic_raise_el3_sgi(int sgi_num, u_register_t target); 88 void plat_ic_set_spi_routing(unsigned int id, unsigned int routing_mode, 89 u_register_t mpidr); 90 void plat_ic_set_interrupt_pending(unsigned int id); 91 void plat_ic_clear_interrupt_pending(unsigned int id); 92 unsigned int plat_ic_set_priority_mask(unsigned int mask); 93 unsigned int plat_ic_get_interrupt_id(unsigned int raw); 94 95 /******************************************************************************* 96 * Optional common functions (may be overridden) 97 ******************************************************************************/ 98 uintptr_t plat_get_my_stack(void); 99 void plat_report_exception(unsigned int exception_type); 100 int plat_crash_console_init(void); 101 int plat_crash_console_putc(int c); 102 int plat_crash_console_flush(void); 103 void plat_error_handler(int err) __dead2; 104 void plat_panic_handler(void) __dead2; 105 const char *plat_log_get_prefix(unsigned int log_level); 106 void bl2_plat_preload_setup(void); 107 int plat_try_next_boot_source(void); 108 109 /******************************************************************************* 110 * Mandatory BL1 functions 111 ******************************************************************************/ 112 void bl1_early_platform_setup(void); 113 void bl1_plat_arch_setup(void); 114 void bl1_platform_setup(void); 115 struct meminfo *bl1_plat_sec_mem_layout(void); 116 117 /******************************************************************************* 118 * Optional EL3 component functions in BL31 119 ******************************************************************************/ 120 121 /* SDEI platform functions */ 122 #if SDEI_SUPPORT 123 int plat_sdei_validate_entry_point(uintptr_t ep, unsigned int client_mode); 124 void plat_sdei_handle_masked_trigger(uint64_t mpidr, unsigned int intr); 125 #endif 126 127 /* 128 * The following function is mandatory when the 129 * firmware update feature is used. 130 */ 131 int bl1_plat_mem_check(uintptr_t mem_base, unsigned int mem_size, 132 unsigned int flags); 133 134 /******************************************************************************* 135 * Optional BL1 functions (may be overridden) 136 ******************************************************************************/ 137 void bl1_init_bl2_mem_layout(const struct meminfo *bl1_mem_layout, 138 struct meminfo *bl2_mem_layout); 139 140 /* 141 * The following functions are used for image loading process in BL1. 142 */ 143 void bl1_plat_set_ep_info(unsigned int image_id, 144 struct entry_point_info *ep_info); 145 /* 146 * The following functions are mandatory when firmware update 147 * feature is used and optional otherwise. 148 */ 149 unsigned int bl1_plat_get_next_image_id(void); 150 struct image_desc *bl1_plat_get_image_desc(unsigned int image_id); 151 152 /* 153 * The following functions are used by firmware update 154 * feature and may optionally be overridden. 155 */ 156 __dead2 void bl1_plat_fwu_done(void *client_cookie, void *reserved); 157 158 /* 159 * This BL1 function can be used by the platforms to update/use image 160 * information for a given `image_id`. 161 */ 162 int bl1_plat_handle_pre_image_load(unsigned int image_id); 163 int bl1_plat_handle_post_image_load(unsigned int image_id); 164 165 /******************************************************************************* 166 * Mandatory BL2 functions 167 ******************************************************************************/ 168 void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1, u_register_t arg2, u_register_t arg3); 169 #if !ERROR_DEPRECATED 170 void bl2_early_platform_setup(struct meminfo *mem_layout); 171 #endif 172 void bl2_plat_arch_setup(void); 173 void bl2_platform_setup(void); 174 struct meminfo *bl2_plat_sec_mem_layout(void); 175 176 #if LOAD_IMAGE_V2 177 /* 178 * This function can be used by the platforms to update/use image 179 * information for given `image_id`. 180 */ 181 int bl2_plat_handle_pre_image_load(unsigned int image_id); 182 int bl2_plat_handle_post_image_load(unsigned int image_id); 183 184 #else /* LOAD_IMAGE_V2 */ 185 186 /* 187 * This function returns a pointer to the shared memory that the platform has 188 * kept aside to pass trusted firmware related information that BL31 189 * could need 190 */ 191 struct bl31_params *bl2_plat_get_bl31_params(void); 192 193 /* 194 * This function returns a pointer to the shared memory that the platform 195 * has kept to point to entry point information of BL31 to BL2 196 */ 197 struct entry_point_info *bl2_plat_get_bl31_ep_info(void); 198 199 /* 200 * This function flushes to main memory all the params that are 201 * passed to BL31 202 */ 203 void bl2_plat_flush_bl31_params(void); 204 205 /* 206 * The next 2 functions allow the platform to change the entrypoint information 207 * for the mandatory 3rd level BL images, BL31 and BL33. This is done after 208 * BL2 has loaded those images into memory but before BL31 is executed. 209 */ 210 void bl2_plat_set_bl31_ep_info(struct image_info *image, 211 struct entry_point_info *ep); 212 213 void bl2_plat_set_bl33_ep_info(struct image_info *image, 214 struct entry_point_info *ep); 215 216 /* Gets the memory layout for BL33 */ 217 void bl2_plat_get_bl33_meminfo(struct meminfo *mem_info); 218 219 /******************************************************************************* 220 * Conditionally mandatory BL2 functions: must be implemented if SCP_BL2 image 221 * is supported 222 ******************************************************************************/ 223 /* Gets the memory layout for SCP_BL2 */ 224 void bl2_plat_get_scp_bl2_meminfo(struct meminfo *mem_info); 225 226 /* 227 * This function is called after loading SCP_BL2 image and it is used to perform 228 * any platform-specific actions required to handle the SCP firmware. 229 */ 230 int bl2_plat_handle_scp_bl2(struct image_info *scp_bl2_image_info); 231 232 /******************************************************************************* 233 * Conditionally mandatory BL2 functions: must be implemented if BL32 image 234 * is supported 235 ******************************************************************************/ 236 void bl2_plat_set_bl32_ep_info(struct image_info *image, 237 struct entry_point_info *ep); 238 239 /* Gets the memory layout for BL32 */ 240 void bl2_plat_get_bl32_meminfo(struct meminfo *mem_info); 241 242 #endif /* LOAD_IMAGE_V2 */ 243 244 /******************************************************************************* 245 * Optional BL2 functions (may be overridden) 246 ******************************************************************************/ 247 248 249 /******************************************************************************* 250 * Mandatory BL2 at EL3 functions: Must be implemented if BL2_AT_EL3 image is 251 * supported 252 ******************************************************************************/ 253 void bl2_el3_early_platform_setup(u_register_t arg0, u_register_t arg1, 254 u_register_t arg2, u_register_t arg3); 255 void bl2_el3_plat_arch_setup(void); 256 257 258 /******************************************************************************* 259 * Optional BL2 at EL3 functions (may be overridden) 260 ******************************************************************************/ 261 void bl2_el3_plat_prepare_exit(void); 262 263 /******************************************************************************* 264 * Mandatory BL2U functions. 265 ******************************************************************************/ 266 void bl2u_early_platform_setup(struct meminfo *mem_layout, 267 void *plat_info); 268 void bl2u_plat_arch_setup(void); 269 void bl2u_platform_setup(void); 270 271 /******************************************************************************* 272 * Conditionally mandatory BL2U functions for CSS platforms. 273 ******************************************************************************/ 274 /* 275 * This function is used to perform any platform-specific actions required to 276 * handle the BL2U_SCP firmware. 277 */ 278 int bl2u_plat_handle_scp_bl2u(void); 279 280 /******************************************************************************* 281 * Mandatory BL31 functions 282 ******************************************************************************/ 283 #if !ERROR_DEPRECATED 284 #if LOAD_IMAGE_V2 285 void bl31_early_platform_setup(void *from_bl2, 286 void *plat_params_from_bl2); 287 #else 288 void bl31_early_platform_setup(struct bl31_params *from_bl2, 289 void *plat_params_from_bl2); 290 #endif 291 #endif /* ERROR_DEPRECATED */ 292 void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1, 293 u_register_t arg2, u_register_t arg3); 294 void bl31_plat_arch_setup(void); 295 void bl31_platform_setup(void); 296 void bl31_plat_runtime_setup(void); 297 struct entry_point_info *bl31_plat_get_next_image_ep_info(uint32_t type); 298 299 /******************************************************************************* 300 * Mandatory PSCI functions (BL31) 301 ******************************************************************************/ 302 int plat_setup_psci_ops(uintptr_t sec_entrypoint, 303 const struct plat_psci_ops **); 304 const unsigned char *plat_get_power_domain_tree_desc(void); 305 306 /******************************************************************************* 307 * Optional PSCI functions (BL31). 308 ******************************************************************************/ 309 void plat_psci_stat_accounting_start(const psci_power_state_t *state_info); 310 void plat_psci_stat_accounting_stop(const psci_power_state_t *state_info); 311 u_register_t plat_psci_stat_get_residency(unsigned int lvl, 312 const psci_power_state_t *state_info, 313 int last_cpu_index); 314 plat_local_state_t plat_get_target_pwr_state(unsigned int lvl, 315 const plat_local_state_t *states, 316 unsigned int ncpu); 317 318 /******************************************************************************* 319 * Optional BL31 functions (may be overridden) 320 ******************************************************************************/ 321 void bl31_plat_enable_mmu(uint32_t flags); 322 323 /******************************************************************************* 324 * Optional BL32 functions (may be overridden) 325 ******************************************************************************/ 326 void bl32_plat_enable_mmu(uint32_t flags); 327 328 /******************************************************************************* 329 * Trusted Board Boot functions 330 ******************************************************************************/ 331 int plat_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len, 332 unsigned int *flags); 333 int plat_get_nv_ctr(void *cookie, unsigned int *nv_ctr); 334 int plat_set_nv_ctr(void *cookie, unsigned int nv_ctr); 335 int plat_set_nv_ctr2(void *cookie, const struct auth_img_desc_s *img_desc, 336 unsigned int nv_ctr); 337 338 /******************************************************************************* 339 * Secure Partitions functions 340 ******************************************************************************/ 341 const struct mmap_region *plat_get_secure_partition_mmap(void *cookie); 342 const struct secure_partition_boot_info *plat_get_secure_partition_boot_info( 343 void *cookie); 344 345 #if LOAD_IMAGE_V2 346 /******************************************************************************* 347 * Mandatory BL image load functions(may be overridden). 348 ******************************************************************************/ 349 /* 350 * This function returns pointer to the list of images that the 351 * platform has populated to load. 352 */ 353 struct bl_load_info *plat_get_bl_image_load_info(void); 354 355 /* 356 * This function returns a pointer to the shared memory that the 357 * platform has kept aside to pass trusted firmware related 358 * information that next BL image could need. 359 */ 360 struct bl_params *plat_get_next_bl_params(void); 361 362 /* 363 * This function flushes to main memory all the params that are 364 * passed to next image. 365 */ 366 void plat_flush_next_bl_params(void); 367 368 #endif /* LOAD_IMAGE_V2 */ 369 370 #if ENABLE_PLAT_COMPAT 371 /* 372 * The below declarations are to enable compatibility for the platform ports 373 * using the old platform interface. 374 */ 375 376 /******************************************************************************* 377 * Optional common functions (may be overridden) 378 ******************************************************************************/ 379 unsigned int platform_get_core_pos(unsigned long mpidr); 380 381 /******************************************************************************* 382 * Mandatory PSCI Compatibility functions (BL31) 383 ******************************************************************************/ 384 int platform_setup_pm(const plat_pm_ops_t **); 385 386 unsigned int plat_get_aff_count(unsigned int, unsigned long); 387 unsigned int plat_get_aff_state(unsigned int, unsigned long); 388 #else /* __ENABLE_PLAT_COMPAT__ */ 389 /* 390 * The below function enable Trusted Firmware components like SPDs which 391 * haven't migrated to the new platform API to compile on platforms which 392 * have the compatibility layer disabled. 393 */ 394 unsigned int platform_get_core_pos(unsigned long mpidr) __deprecated; 395 396 #endif /* __ENABLE_PLAT_COMPAT__ */ 397 398 #endif /* __PLATFORM_H__ */ 399 400