xref: /rk3399_ARM-atf/include/plat/common/platform.h (revision 351f9cd8897fd3ea52db2421721a152494b16328)
1 /*
2  * Copyright (c) 2013-2022, ARM Limited and Contributors. All rights reserved.
3  *
4  * SPDX-License-Identifier: BSD-3-Clause
5  */
6 
7 #ifndef PLATFORM_H
8 #define PLATFORM_H
9 
10 #include <stdint.h>
11 
12 #include <lib/psci/psci.h>
13 #if defined(SPD_spmd)
14  #include <services/spm_core_manifest.h>
15 #endif
16 #if ENABLE_RME
17 #include <services/rmm_core_manifest.h>
18 #endif
19 #if TRNG_SUPPORT
20 #include "plat_trng.h"
21 #endif
22 #include <drivers/fwu/fwu_metadata.h>
23 
24 /*******************************************************************************
25  * Forward declarations
26  ******************************************************************************/
27 struct auth_img_desc_s;
28 struct meminfo;
29 struct image_info;
30 struct entry_point_info;
31 struct image_desc;
32 struct bl_load_info;
33 struct bl_params;
34 struct mmap_region;
35 struct spm_mm_boot_info;
36 struct sp_res_desc;
37 enum fw_enc_status_t;
38 
39 /*******************************************************************************
40  * plat_get_rotpk_info() flags
41  ******************************************************************************/
42 #define ROTPK_IS_HASH			(1 << 0)
43 /* Flag used to skip verification of the certificate ROTPK while the platform
44    ROTPK is not deployed */
45 #define ROTPK_NOT_DEPLOYED		(1 << 1)
46 
47 /*******************************************************************************
48  * plat_get_enc_key_info() flags
49  ******************************************************************************/
50 /*
51  * Flag used to notify caller that information provided in key buffer is an
52  * identifier rather than an actual key.
53  */
54 #define ENC_KEY_IS_IDENTIFIER		(1 << 0)
55 
56 /*******************************************************************************
57  * Function declarations
58  ******************************************************************************/
59 /*******************************************************************************
60  * Mandatory common functions
61  ******************************************************************************/
62 unsigned int plat_get_syscnt_freq2(void);
63 
64 int plat_get_image_source(unsigned int image_id,
65 			uintptr_t *dev_handle,
66 			uintptr_t *image_spec);
67 uintptr_t plat_get_ns_image_entrypoint(void);
68 unsigned int plat_my_core_pos(void);
69 int plat_core_pos_by_mpidr(u_register_t mpidr);
70 int plat_get_mbedtls_heap(void **heap_addr, size_t *heap_size);
71 
72 #if STACK_PROTECTOR_ENABLED
73 /*
74  * Return a new value to be used for the stack protection's canary.
75  *
76  * Ideally, this value is a random number that is impossible to predict by an
77  * attacker.
78  */
79 u_register_t plat_get_stack_protector_canary(void);
80 #endif /* STACK_PROTECTOR_ENABLED */
81 
82 /*******************************************************************************
83  * Mandatory interrupt management functions
84  ******************************************************************************/
85 uint32_t plat_ic_get_pending_interrupt_id(void);
86 uint32_t plat_ic_get_pending_interrupt_type(void);
87 uint32_t plat_ic_acknowledge_interrupt(void);
88 uint32_t plat_ic_get_interrupt_type(uint32_t id);
89 void plat_ic_end_of_interrupt(uint32_t id);
90 uint32_t plat_interrupt_type_to_line(uint32_t type,
91 				     uint32_t security_state);
92 
93 /*******************************************************************************
94  * Optional interrupt management functions, depending on chosen EL3 components.
95  ******************************************************************************/
96 unsigned int plat_ic_get_running_priority(void);
97 int plat_ic_is_spi(unsigned int id);
98 int plat_ic_is_ppi(unsigned int id);
99 int plat_ic_is_sgi(unsigned int id);
100 unsigned int plat_ic_get_interrupt_active(unsigned int id);
101 void plat_ic_disable_interrupt(unsigned int id);
102 void plat_ic_enable_interrupt(unsigned int id);
103 int plat_ic_has_interrupt_type(unsigned int type);
104 void plat_ic_set_interrupt_type(unsigned int id, unsigned int type);
105 void plat_ic_set_interrupt_priority(unsigned int id, unsigned int priority);
106 void plat_ic_raise_el3_sgi(int sgi_num, u_register_t target);
107 void plat_ic_set_spi_routing(unsigned int id, unsigned int routing_mode,
108 		u_register_t mpidr);
109 void plat_ic_set_interrupt_pending(unsigned int id);
110 void plat_ic_clear_interrupt_pending(unsigned int id);
111 unsigned int plat_ic_set_priority_mask(unsigned int mask);
112 unsigned int plat_ic_get_interrupt_id(unsigned int raw);
113 
114 /*******************************************************************************
115  * Optional common functions (may be overridden)
116  ******************************************************************************/
117 uintptr_t plat_get_my_stack(void);
118 void plat_report_exception(unsigned int exception_type);
119 int plat_crash_console_init(void);
120 int plat_crash_console_putc(int c);
121 void plat_crash_console_flush(void);
122 void plat_error_handler(int err) __dead2;
123 void plat_panic_handler(void) __dead2;
124 const char *plat_log_get_prefix(unsigned int log_level);
125 void bl2_plat_preload_setup(void);
126 int plat_try_next_boot_source(void);
127 
128 #if MEASURED_BOOT
129 int plat_mboot_measure_image(unsigned int image_id, image_info_t *image_data);
130 int plat_mboot_measure_critical_data(unsigned int critical_data_id,
131 				     const void *base,
132 				     size_t size);
133 #else
134 static inline int plat_mboot_measure_image(unsigned int image_id __unused,
135 					   image_info_t *image_data __unused)
136 {
137 	return 0;
138 }
139 static inline int plat_mboot_measure_critical_data(
140 					unsigned int critical_data_id __unused,
141 					const void *base __unused,
142 					size_t size __unused)
143 {
144 	return 0;
145 }
146 #endif /* MEASURED_BOOT */
147 
148 /*******************************************************************************
149  * Mandatory BL1 functions
150  ******************************************************************************/
151 void bl1_early_platform_setup(void);
152 void bl1_plat_arch_setup(void);
153 void bl1_platform_setup(void);
154 struct meminfo *bl1_plat_sec_mem_layout(void);
155 
156 /*******************************************************************************
157  * Optional EL3 component functions in BL31
158  ******************************************************************************/
159 
160 /* SDEI platform functions */
161 #if SDEI_SUPPORT
162 void plat_sdei_setup(void);
163 int plat_sdei_validate_entry_point(uintptr_t ep, unsigned int client_mode);
164 void plat_sdei_handle_masked_trigger(uint64_t mpidr, unsigned int intr);
165 #endif
166 
167 void plat_default_ea_handler(unsigned int ea_reason, uint64_t syndrome, void *cookie,
168 		void *handle, uint64_t flags);
169 void plat_ea_handler(unsigned int ea_reason, uint64_t syndrome, void *cookie,
170 		void *handle, uint64_t flags);
171 
172 /*
173  * The following function is mandatory when the
174  * firmware update feature is used.
175  */
176 int bl1_plat_mem_check(uintptr_t mem_base, unsigned int mem_size,
177 		unsigned int flags);
178 
179 /*******************************************************************************
180  * Optional BL1 functions (may be overridden)
181  ******************************************************************************/
182 /*
183  * The following functions are used for image loading process in BL1.
184  */
185 void bl1_plat_set_ep_info(unsigned int image_id,
186 		struct entry_point_info *ep_info);
187 /*
188  * The following functions are mandatory when firmware update
189  * feature is used and optional otherwise.
190  */
191 unsigned int bl1_plat_get_next_image_id(void);
192 struct image_desc *bl1_plat_get_image_desc(unsigned int image_id);
193 
194 /*
195  * The following functions are used by firmware update
196  * feature and may optionally be overridden.
197  */
198 __dead2 void bl1_plat_fwu_done(void *client_cookie, void *reserved);
199 
200 /*
201  * This BL1 function can be used by the platforms to update/use image
202  * information for a given `image_id`.
203  */
204 int bl1_plat_handle_pre_image_load(unsigned int image_id);
205 int bl1_plat_handle_post_image_load(unsigned int image_id);
206 
207 #if MEASURED_BOOT
208 void bl1_plat_mboot_init(void);
209 void bl1_plat_mboot_finish(void);
210 #else
211 static inline void bl1_plat_mboot_init(void)
212 {
213 }
214 static inline void bl1_plat_mboot_finish(void)
215 {
216 }
217 #endif /* MEASURED_BOOT */
218 
219 /*******************************************************************************
220  * Mandatory BL2 functions
221  ******************************************************************************/
222 void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1, u_register_t arg2, u_register_t arg3);
223 void bl2_plat_arch_setup(void);
224 void bl2_platform_setup(void);
225 struct meminfo *bl2_plat_sec_mem_layout(void);
226 
227 /*
228  * This function can be used by the platforms to update/use image
229  * information for given `image_id`.
230  */
231 int bl2_plat_handle_pre_image_load(unsigned int image_id);
232 int bl2_plat_handle_post_image_load(unsigned int image_id);
233 
234 /*******************************************************************************
235  * Optional BL2 functions (may be overridden)
236  ******************************************************************************/
237 #if MEASURED_BOOT
238 void bl2_plat_mboot_init(void);
239 void bl2_plat_mboot_finish(void);
240 #else
241 static inline void bl2_plat_mboot_init(void)
242 {
243 }
244 static inline void bl2_plat_mboot_finish(void)
245 {
246 }
247 #endif /* MEASURED_BOOT */
248 
249 /*******************************************************************************
250  * Mandatory BL2 at EL3 functions: Must be implemented if BL2_AT_EL3 image is
251  * supported
252  ******************************************************************************/
253 void bl2_el3_early_platform_setup(u_register_t arg0, u_register_t arg1,
254 				  u_register_t arg2, u_register_t arg3);
255 void bl2_el3_plat_arch_setup(void);
256 
257 /*******************************************************************************
258  * Optional BL2 at EL3 functions (may be overridden)
259  ******************************************************************************/
260 void bl2_el3_plat_prepare_exit(void);
261 
262 /*******************************************************************************
263  * Mandatory BL2U functions.
264  ******************************************************************************/
265 void bl2u_early_platform_setup(struct meminfo *mem_layout,
266 		void *plat_info);
267 void bl2u_plat_arch_setup(void);
268 void bl2u_platform_setup(void);
269 
270 /*******************************************************************************
271  * Conditionally mandatory BL2U functions for CSS platforms.
272  ******************************************************************************/
273 /*
274  * This function is used to perform any platform-specific actions required to
275  * handle the BL2U_SCP firmware.
276  */
277 int bl2u_plat_handle_scp_bl2u(void);
278 
279 /*******************************************************************************
280  * Mandatory BL31 functions
281  ******************************************************************************/
282 void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
283 		u_register_t arg2, u_register_t arg3);
284 void bl31_plat_arch_setup(void);
285 void bl31_platform_setup(void);
286 void bl31_plat_runtime_setup(void);
287 struct entry_point_info *bl31_plat_get_next_image_ep_info(uint32_t type);
288 
289 /*******************************************************************************
290  * Mandatory PSCI functions (BL31)
291  ******************************************************************************/
292 int plat_setup_psci_ops(uintptr_t sec_entrypoint,
293 			const struct plat_psci_ops **psci_ops);
294 const unsigned char *plat_get_power_domain_tree_desc(void);
295 
296 /*******************************************************************************
297  * Optional PSCI functions (BL31).
298  ******************************************************************************/
299 void plat_psci_stat_accounting_start(const psci_power_state_t *state_info);
300 void plat_psci_stat_accounting_stop(const psci_power_state_t *state_info);
301 u_register_t plat_psci_stat_get_residency(unsigned int lvl,
302 			const psci_power_state_t *state_info,
303 			unsigned int last_cpu_idx);
304 plat_local_state_t plat_get_target_pwr_state(unsigned int lvl,
305 			const plat_local_state_t *states,
306 			unsigned int ncpu);
307 
308 /*******************************************************************************
309  * Mandatory BL31 functions when ENABLE_RME=1
310  ******************************************************************************/
311 #if ENABLE_RME
312 int plat_rmmd_get_cca_attest_token(uintptr_t buf, size_t *len,
313 				   uintptr_t hash, size_t hash_size);
314 int plat_rmmd_get_cca_realm_attest_key(uintptr_t buf, size_t *len,
315 				       unsigned int type);
316 size_t plat_rmmd_get_el3_rmm_shared_mem(uintptr_t *shared);
317 int plat_rmmd_load_manifest(rmm_manifest_t *manifest);
318 #endif
319 
320 /*******************************************************************************
321  * Optional BL31 functions (may be overridden)
322  ******************************************************************************/
323 void bl31_plat_enable_mmu(uint32_t flags);
324 
325 /*******************************************************************************
326  * Optional BL32 functions (may be overridden)
327  ******************************************************************************/
328 void bl32_plat_enable_mmu(uint32_t flags);
329 
330 /*******************************************************************************
331  * Trusted Board Boot functions
332  ******************************************************************************/
333 int plat_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len,
334 			unsigned int *flags);
335 int plat_get_nv_ctr(void *cookie, unsigned int *nv_ctr);
336 int plat_set_nv_ctr(void *cookie, unsigned int nv_ctr);
337 int plat_set_nv_ctr2(void *cookie, const struct auth_img_desc_s *img_desc,
338 		unsigned int nv_ctr);
339 int get_mbedtls_heap_helper(void **heap_addr, size_t *heap_size);
340 int plat_get_enc_key_info(enum fw_enc_status_t fw_enc_status, uint8_t *key,
341 			  size_t *key_len, unsigned int *flags,
342 			  const uint8_t *img_id, size_t img_id_len);
343 
344 /*******************************************************************************
345  * Secure Partitions functions
346  ******************************************************************************/
347 const struct mmap_region *plat_get_secure_partition_mmap(void *cookie);
348 const struct spm_mm_boot_info *plat_get_secure_partition_boot_info(
349 		void *cookie);
350 int plat_spm_sp_rd_load(struct sp_res_desc *rd, const void *ptr, size_t size);
351 int plat_spm_sp_get_next_address(void **sp_base, size_t *sp_size,
352 				 void **rd_base, size_t *rd_size);
353 #if defined(SPD_spmd)
354 int plat_spm_core_manifest_load(spmc_manifest_attribute_t *manifest,
355 				const void *pm_addr);
356 #endif
357 #if defined(SPMC_AT_EL3)
358 int plat_spmc_shmem_datastore_get(uint8_t **datastore, size_t *size);
359 #endif
360 
361 /*******************************************************************************
362  * Mandatory BL image load functions(may be overridden).
363  ******************************************************************************/
364 /*
365  * This function returns pointer to the list of images that the
366  * platform has populated to load.
367  */
368 struct bl_load_info *plat_get_bl_image_load_info(void);
369 
370 /*
371  * This function returns a pointer to the shared memory that the
372  * platform has kept aside to pass trusted firmware related
373  * information that next BL image could need.
374  */
375 struct bl_params *plat_get_next_bl_params(void);
376 
377 /*
378  * This function flushes to main memory all the params that are
379  * passed to next image.
380  */
381 void plat_flush_next_bl_params(void);
382 
383 /*
384  * The below function enable Trusted Firmware components like SPDs which
385  * haven't migrated to the new platform API to compile on platforms which
386  * have the compatibility layer disabled.
387  */
388 unsigned int platform_core_pos_helper(unsigned long mpidr);
389 
390 /*
391  * Optional function to get SOC version
392  */
393 int32_t plat_get_soc_version(void);
394 
395 /*
396  * Optional function to get SOC revision
397  */
398 int32_t plat_get_soc_revision(void);
399 
400 /*
401  * Optional function to check for SMCCC function availability for platform
402  */
403 int32_t plat_is_smccc_feature_available(u_register_t fid);
404 
405 /*******************************************************************************
406  * FWU platform specific functions
407  ******************************************************************************/
408 int plat_fwu_set_metadata_image_source(unsigned int image_id,
409 				       uintptr_t *dev_handle,
410 				       uintptr_t *image_spec);
411 void plat_fwu_set_images_source(const struct fwu_metadata *metadata);
412 uint32_t plat_fwu_get_boot_idx(void);
413 
414 #endif /* PLATFORM_H */
415