xref: /rk3399_ARM-atf/include/plat/common/platform.h (revision 050a99a62f1df4de589be077b5b5fffe3c93afc7)
1 /*
2  * Copyright (c) 2013-2021, ARM Limited and Contributors. All rights reserved.
3  *
4  * SPDX-License-Identifier: BSD-3-Clause
5  */
6 
7 #ifndef PLATFORM_H
8 #define PLATFORM_H
9 
10 #include <stdint.h>
11 
12 #include <lib/psci/psci.h>
13 #if defined(SPD_spmd)
14  #include <services/spm_core_manifest.h>
15 #endif
16 #if TRNG_SUPPORT
17 #include "plat_trng.h"
18 #endif
19 #include <drivers/fwu/fwu_metadata.h>
20 
21 /*******************************************************************************
22  * Forward declarations
23  ******************************************************************************/
24 struct auth_img_desc_s;
25 struct meminfo;
26 struct image_info;
27 struct entry_point_info;
28 struct image_desc;
29 struct bl_load_info;
30 struct bl_params;
31 struct mmap_region;
32 struct spm_mm_boot_info;
33 struct sp_res_desc;
34 enum fw_enc_status_t;
35 
36 /*******************************************************************************
37  * plat_get_rotpk_info() flags
38  ******************************************************************************/
39 #define ROTPK_IS_HASH			(1 << 0)
40 /* Flag used to skip verification of the certificate ROTPK while the platform
41    ROTPK is not deployed */
42 #define ROTPK_NOT_DEPLOYED		(1 << 1)
43 
44 /*******************************************************************************
45  * plat_get_enc_key_info() flags
46  ******************************************************************************/
47 /*
48  * Flag used to notify caller that information provided in key buffer is an
49  * identifier rather than an actual key.
50  */
51 #define ENC_KEY_IS_IDENTIFIER		(1 << 0)
52 
53 /*******************************************************************************
54  * Function declarations
55  ******************************************************************************/
56 /*******************************************************************************
57  * Mandatory common functions
58  ******************************************************************************/
59 unsigned int plat_get_syscnt_freq2(void);
60 
61 int plat_get_image_source(unsigned int image_id,
62 			uintptr_t *dev_handle,
63 			uintptr_t *image_spec);
64 uintptr_t plat_get_ns_image_entrypoint(void);
65 unsigned int plat_my_core_pos(void);
66 int plat_core_pos_by_mpidr(u_register_t mpidr);
67 int plat_get_mbedtls_heap(void **heap_addr, size_t *heap_size);
68 
69 #if STACK_PROTECTOR_ENABLED
70 /*
71  * Return a new value to be used for the stack protection's canary.
72  *
73  * Ideally, this value is a random number that is impossible to predict by an
74  * attacker.
75  */
76 u_register_t plat_get_stack_protector_canary(void);
77 #endif /* STACK_PROTECTOR_ENABLED */
78 
79 /*******************************************************************************
80  * Mandatory interrupt management functions
81  ******************************************************************************/
82 uint32_t plat_ic_get_pending_interrupt_id(void);
83 uint32_t plat_ic_get_pending_interrupt_type(void);
84 uint32_t plat_ic_acknowledge_interrupt(void);
85 uint32_t plat_ic_get_interrupt_type(uint32_t id);
86 void plat_ic_end_of_interrupt(uint32_t id);
87 uint32_t plat_interrupt_type_to_line(uint32_t type,
88 				     uint32_t security_state);
89 
90 /*******************************************************************************
91  * Optional interrupt management functions, depending on chosen EL3 components.
92  ******************************************************************************/
93 unsigned int plat_ic_get_running_priority(void);
94 int plat_ic_is_spi(unsigned int id);
95 int plat_ic_is_ppi(unsigned int id);
96 int plat_ic_is_sgi(unsigned int id);
97 unsigned int plat_ic_get_interrupt_active(unsigned int id);
98 void plat_ic_disable_interrupt(unsigned int id);
99 void plat_ic_enable_interrupt(unsigned int id);
100 int plat_ic_has_interrupt_type(unsigned int type);
101 void plat_ic_set_interrupt_type(unsigned int id, unsigned int type);
102 void plat_ic_set_interrupt_priority(unsigned int id, unsigned int priority);
103 void plat_ic_raise_el3_sgi(int sgi_num, u_register_t target);
104 void plat_ic_set_spi_routing(unsigned int id, unsigned int routing_mode,
105 		u_register_t mpidr);
106 void plat_ic_set_interrupt_pending(unsigned int id);
107 void plat_ic_clear_interrupt_pending(unsigned int id);
108 unsigned int plat_ic_set_priority_mask(unsigned int mask);
109 unsigned int plat_ic_get_interrupt_id(unsigned int raw);
110 
111 /*******************************************************************************
112  * Optional common functions (may be overridden)
113  ******************************************************************************/
114 uintptr_t plat_get_my_stack(void);
115 void plat_report_exception(unsigned int exception_type);
116 int plat_crash_console_init(void);
117 int plat_crash_console_putc(int c);
118 void plat_crash_console_flush(void);
119 void plat_error_handler(int err) __dead2;
120 void plat_panic_handler(void) __dead2;
121 const char *plat_log_get_prefix(unsigned int log_level);
122 void bl2_plat_preload_setup(void);
123 int plat_try_next_boot_source(void);
124 
125 /*******************************************************************************
126  * Mandatory BL1 functions
127  ******************************************************************************/
128 void bl1_early_platform_setup(void);
129 void bl1_plat_arch_setup(void);
130 void bl1_platform_setup(void);
131 struct meminfo *bl1_plat_sec_mem_layout(void);
132 
133 /*******************************************************************************
134  * Optional EL3 component functions in BL31
135  ******************************************************************************/
136 
137 /* SDEI platform functions */
138 #if SDEI_SUPPORT
139 void plat_sdei_setup(void);
140 int plat_sdei_validate_entry_point(uintptr_t ep, unsigned int client_mode);
141 void plat_sdei_handle_masked_trigger(uint64_t mpidr, unsigned int intr);
142 #endif
143 
144 void plat_ea_handler(unsigned int ea_reason, uint64_t syndrome, void *cookie,
145 		void *handle, uint64_t flags);
146 
147 /*
148  * The following function is mandatory when the
149  * firmware update feature is used.
150  */
151 int bl1_plat_mem_check(uintptr_t mem_base, unsigned int mem_size,
152 		unsigned int flags);
153 
154 /*******************************************************************************
155  * Optional BL1 functions (may be overridden)
156  ******************************************************************************/
157 /*
158  * The following functions are used for image loading process in BL1.
159  */
160 void bl1_plat_set_ep_info(unsigned int image_id,
161 		struct entry_point_info *ep_info);
162 /*
163  * The following functions are mandatory when firmware update
164  * feature is used and optional otherwise.
165  */
166 unsigned int bl1_plat_get_next_image_id(void);
167 struct image_desc *bl1_plat_get_image_desc(unsigned int image_id);
168 
169 /*
170  * The following functions are used by firmware update
171  * feature and may optionally be overridden.
172  */
173 __dead2 void bl1_plat_fwu_done(void *client_cookie, void *reserved);
174 
175 /*
176  * This BL1 function can be used by the platforms to update/use image
177  * information for a given `image_id`.
178  */
179 int bl1_plat_handle_pre_image_load(unsigned int image_id);
180 int bl1_plat_handle_post_image_load(unsigned int image_id);
181 
182 #if MEASURED_BOOT
183 /*
184  * Calculates and writes BL2 hash data to the platform's defined location.
185  * For ARM platforms the data are written to TB_FW_CONFIG DTB.
186  */
187 void bl1_plat_set_bl2_hash(const image_desc_t *image_desc);
188 #endif
189 
190 /*******************************************************************************
191  * Mandatory BL2 functions
192  ******************************************************************************/
193 void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1, u_register_t arg2, u_register_t arg3);
194 void bl2_plat_arch_setup(void);
195 void bl2_platform_setup(void);
196 struct meminfo *bl2_plat_sec_mem_layout(void);
197 
198 /*
199  * This function can be used by the platforms to update/use image
200  * information for given `image_id`.
201  */
202 int bl2_plat_handle_pre_image_load(unsigned int image_id);
203 int bl2_plat_handle_post_image_load(unsigned int image_id);
204 
205 /*******************************************************************************
206  * Optional BL2 functions (may be overridden)
207  ******************************************************************************/
208 #if MEASURED_BOOT
209 /* Read TCG_DIGEST_SIZE bytes of BL2 hash data */
210 void bl2_plat_get_hash(void *data);
211 #endif
212 
213 /*******************************************************************************
214  * Mandatory BL2 at EL3 functions: Must be implemented if BL2_AT_EL3 image is
215  * supported
216  ******************************************************************************/
217 void bl2_el3_early_platform_setup(u_register_t arg0, u_register_t arg1,
218 				  u_register_t arg2, u_register_t arg3);
219 void bl2_el3_plat_arch_setup(void);
220 
221 /*******************************************************************************
222  * Optional BL2 at EL3 functions (may be overridden)
223  ******************************************************************************/
224 void bl2_el3_plat_prepare_exit(void);
225 
226 /*******************************************************************************
227  * Mandatory BL2U functions.
228  ******************************************************************************/
229 void bl2u_early_platform_setup(struct meminfo *mem_layout,
230 		void *plat_info);
231 void bl2u_plat_arch_setup(void);
232 void bl2u_platform_setup(void);
233 
234 /*******************************************************************************
235  * Conditionally mandatory BL2U functions for CSS platforms.
236  ******************************************************************************/
237 /*
238  * This function is used to perform any platform-specific actions required to
239  * handle the BL2U_SCP firmware.
240  */
241 int bl2u_plat_handle_scp_bl2u(void);
242 
243 /*******************************************************************************
244  * Mandatory BL31 functions
245  ******************************************************************************/
246 void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
247 		u_register_t arg2, u_register_t arg3);
248 void bl31_plat_arch_setup(void);
249 void bl31_platform_setup(void);
250 void bl31_plat_runtime_setup(void);
251 struct entry_point_info *bl31_plat_get_next_image_ep_info(uint32_t type);
252 
253 /*******************************************************************************
254  * Mandatory PSCI functions (BL31)
255  ******************************************************************************/
256 int plat_setup_psci_ops(uintptr_t sec_entrypoint,
257 			const struct plat_psci_ops **psci_ops);
258 const unsigned char *plat_get_power_domain_tree_desc(void);
259 
260 /*******************************************************************************
261  * Optional PSCI functions (BL31).
262  ******************************************************************************/
263 void plat_psci_stat_accounting_start(const psci_power_state_t *state_info);
264 void plat_psci_stat_accounting_stop(const psci_power_state_t *state_info);
265 u_register_t plat_psci_stat_get_residency(unsigned int lvl,
266 			const psci_power_state_t *state_info,
267 			unsigned int last_cpu_idx);
268 plat_local_state_t plat_get_target_pwr_state(unsigned int lvl,
269 			const plat_local_state_t *states,
270 			unsigned int ncpu);
271 
272 /*******************************************************************************
273  * Optional BL31 functions (may be overridden)
274  ******************************************************************************/
275 void bl31_plat_enable_mmu(uint32_t flags);
276 
277 /*******************************************************************************
278  * Optional BL32 functions (may be overridden)
279  ******************************************************************************/
280 void bl32_plat_enable_mmu(uint32_t flags);
281 
282 /*******************************************************************************
283  * Trusted Board Boot functions
284  ******************************************************************************/
285 int plat_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len,
286 			unsigned int *flags);
287 int plat_get_nv_ctr(void *cookie, unsigned int *nv_ctr);
288 int plat_set_nv_ctr(void *cookie, unsigned int nv_ctr);
289 int plat_set_nv_ctr2(void *cookie, const struct auth_img_desc_s *img_desc,
290 		unsigned int nv_ctr);
291 int get_mbedtls_heap_helper(void **heap_addr, size_t *heap_size);
292 int plat_get_enc_key_info(enum fw_enc_status_t fw_enc_status, uint8_t *key,
293 			  size_t *key_len, unsigned int *flags,
294 			  const uint8_t *img_id, size_t img_id_len);
295 
296 /*******************************************************************************
297  * Secure Partitions functions
298  ******************************************************************************/
299 const struct mmap_region *plat_get_secure_partition_mmap(void *cookie);
300 const struct spm_mm_boot_info *plat_get_secure_partition_boot_info(
301 		void *cookie);
302 int plat_spm_sp_rd_load(struct sp_res_desc *rd, const void *ptr, size_t size);
303 int plat_spm_sp_get_next_address(void **sp_base, size_t *sp_size,
304 				 void **rd_base, size_t *rd_size);
305 #if defined(SPD_spmd)
306 int plat_spm_core_manifest_load(spmc_manifest_attribute_t *manifest,
307 				const void *pm_addr);
308 #endif
309 /*******************************************************************************
310  * Mandatory BL image load functions(may be overridden).
311  ******************************************************************************/
312 /*
313  * This function returns pointer to the list of images that the
314  * platform has populated to load.
315  */
316 struct bl_load_info *plat_get_bl_image_load_info(void);
317 
318 /*
319  * This function returns a pointer to the shared memory that the
320  * platform has kept aside to pass trusted firmware related
321  * information that next BL image could need.
322  */
323 struct bl_params *plat_get_next_bl_params(void);
324 
325 /*
326  * This function flushes to main memory all the params that are
327  * passed to next image.
328  */
329 void plat_flush_next_bl_params(void);
330 
331 /*
332  * The below function enable Trusted Firmware components like SPDs which
333  * haven't migrated to the new platform API to compile on platforms which
334  * have the compatibility layer disabled.
335  */
336 unsigned int platform_core_pos_helper(unsigned long mpidr);
337 
338 /*
339  * Optional function to get SOC version
340  */
341 int32_t plat_get_soc_version(void);
342 
343 /*
344  * Optional function to get SOC revision
345  */
346 int32_t plat_get_soc_revision(void);
347 
348 /*
349  * Optional function to check for SMCCC function availability for platform
350  */
351 int32_t plat_is_smccc_feature_available(u_register_t fid);
352 
353 /*******************************************************************************
354  * FWU platform specific functions
355  ******************************************************************************/
356 int plat_fwu_set_metadata_image_source(unsigned int image_id,
357 				       uintptr_t *dev_handle,
358 				       uintptr_t *image_spec);
359 void plat_fwu_set_images_source(struct fwu_metadata *metadata);
360 
361 #endif /* PLATFORM_H */
362