1 /* 2 * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions are met: 6 * 7 * Redistributions of source code must retain the above copyright notice, this 8 * list of conditions and the following disclaimer. 9 * 10 * Redistributions in binary form must reproduce the above copyright notice, 11 * this list of conditions and the following disclaimer in the documentation 12 * and/or other materials provided with the distribution. 13 * 14 * Neither the name of ARM nor the names of its contributors may be used 15 * to endorse or promote products derived from this software without specific 16 * prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 22 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 * POSSIBILITY OF SUCH DAMAGE. 29 */ 30 #ifndef __ARM_DEF_H__ 31 #define __ARM_DEF_H__ 32 33 #include <arch.h> 34 #include <common_def.h> 35 #include <platform_def.h> 36 #include <tbbr_img_def.h> 37 #include <xlat_tables.h> 38 39 40 /****************************************************************************** 41 * Definitions common to all ARM standard platforms 42 *****************************************************************************/ 43 44 /* Special value used to verify platform parameters from BL2 to BL31 */ 45 #define ARM_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL 46 47 #define ARM_CLUSTER_COUNT 2 48 #define ARM_SYSTEM_COUNT 1 49 50 #define ARM_CACHE_WRITEBACK_SHIFT 6 51 52 /* 53 * Macros mapping the MPIDR Affinity levels to ARM Platform Power levels. The 54 * power levels have a 1:1 mapping with the MPIDR affinity levels. 55 */ 56 #define ARM_PWR_LVL0 MPIDR_AFFLVL0 57 #define ARM_PWR_LVL1 MPIDR_AFFLVL1 58 #define ARM_PWR_LVL2 MPIDR_AFFLVL2 59 60 /* 61 * Macros for local power states in ARM platforms encoded by State-ID field 62 * within the power-state parameter. 63 */ 64 /* Local power state for power domains in Run state. */ 65 #define ARM_LOCAL_STATE_RUN 0 66 /* Local power state for retention. Valid only for CPU power domains */ 67 #define ARM_LOCAL_STATE_RET 1 68 /* Local power state for OFF/power-down. Valid for CPU and cluster power 69 domains */ 70 #define ARM_LOCAL_STATE_OFF 2 71 72 /* Memory location options for TSP */ 73 #define ARM_TRUSTED_SRAM_ID 0 74 #define ARM_TRUSTED_DRAM_ID 1 75 #define ARM_DRAM_ID 2 76 77 /* The first 4KB of Trusted SRAM are used as shared memory */ 78 #define ARM_TRUSTED_SRAM_BASE 0x04000000 79 #define ARM_SHARED_RAM_BASE ARM_TRUSTED_SRAM_BASE 80 #define ARM_SHARED_RAM_SIZE 0x00001000 /* 4 KB */ 81 82 /* The remaining Trusted SRAM is used to load the BL images */ 83 #define ARM_BL_RAM_BASE (ARM_SHARED_RAM_BASE + \ 84 ARM_SHARED_RAM_SIZE) 85 #define ARM_BL_RAM_SIZE (PLAT_ARM_TRUSTED_SRAM_SIZE - \ 86 ARM_SHARED_RAM_SIZE) 87 88 /* 89 * The top 16MB of DRAM1 is configured as secure access only using the TZC 90 * - SCP TZC DRAM: If present, DRAM reserved for SCP use 91 * - AP TZC DRAM: The remaining TZC secured DRAM reserved for AP use 92 */ 93 #define ARM_TZC_DRAM1_SIZE MAKE_ULL(0x01000000) 94 95 #define ARM_SCP_TZC_DRAM1_BASE (ARM_DRAM1_BASE + \ 96 ARM_DRAM1_SIZE - \ 97 ARM_SCP_TZC_DRAM1_SIZE) 98 #define ARM_SCP_TZC_DRAM1_SIZE PLAT_ARM_SCP_TZC_DRAM1_SIZE 99 #define ARM_SCP_TZC_DRAM1_END (ARM_SCP_TZC_DRAM1_BASE + \ 100 ARM_SCP_TZC_DRAM1_SIZE - 1) 101 102 #define ARM_AP_TZC_DRAM1_BASE (ARM_DRAM1_BASE + \ 103 ARM_DRAM1_SIZE - \ 104 ARM_TZC_DRAM1_SIZE) 105 #define ARM_AP_TZC_DRAM1_SIZE (ARM_TZC_DRAM1_SIZE - \ 106 ARM_SCP_TZC_DRAM1_SIZE) 107 #define ARM_AP_TZC_DRAM1_END (ARM_AP_TZC_DRAM1_BASE + \ 108 ARM_AP_TZC_DRAM1_SIZE - 1) 109 110 111 #define ARM_NS_DRAM1_BASE ARM_DRAM1_BASE 112 #define ARM_NS_DRAM1_SIZE (ARM_DRAM1_SIZE - \ 113 ARM_TZC_DRAM1_SIZE) 114 #define ARM_NS_DRAM1_END (ARM_NS_DRAM1_BASE + \ 115 ARM_NS_DRAM1_SIZE - 1) 116 117 #define ARM_DRAM1_BASE MAKE_ULL(0x80000000) 118 #define ARM_DRAM1_SIZE MAKE_ULL(0x80000000) 119 #define ARM_DRAM1_END (ARM_DRAM1_BASE + \ 120 ARM_DRAM1_SIZE - 1) 121 122 #define ARM_DRAM2_BASE MAKE_ULL(0x880000000) 123 #define ARM_DRAM2_SIZE PLAT_ARM_DRAM2_SIZE 124 #define ARM_DRAM2_END (ARM_DRAM2_BASE + \ 125 ARM_DRAM2_SIZE - 1) 126 127 #define ARM_IRQ_SEC_PHY_TIMER 29 128 129 #define ARM_IRQ_SEC_SGI_0 8 130 #define ARM_IRQ_SEC_SGI_1 9 131 #define ARM_IRQ_SEC_SGI_2 10 132 #define ARM_IRQ_SEC_SGI_3 11 133 #define ARM_IRQ_SEC_SGI_4 12 134 #define ARM_IRQ_SEC_SGI_5 13 135 #define ARM_IRQ_SEC_SGI_6 14 136 #define ARM_IRQ_SEC_SGI_7 15 137 138 /* 139 * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3 140 * terminology. On a GICv2 system or mode, the lists will be merged and treated 141 * as Group 0 interrupts. 142 */ 143 #define ARM_G1S_IRQS ARM_IRQ_SEC_PHY_TIMER, \ 144 ARM_IRQ_SEC_SGI_1, \ 145 ARM_IRQ_SEC_SGI_2, \ 146 ARM_IRQ_SEC_SGI_3, \ 147 ARM_IRQ_SEC_SGI_4, \ 148 ARM_IRQ_SEC_SGI_5, \ 149 ARM_IRQ_SEC_SGI_7 150 151 #define ARM_G0_IRQS ARM_IRQ_SEC_SGI_0, \ 152 ARM_IRQ_SEC_SGI_6 153 154 #define ARM_SHARED_RAM_ATTR ((PLAT_ARM_SHARED_RAM_CACHED ? \ 155 MT_MEMORY : MT_DEVICE) \ 156 | MT_RW | MT_SECURE) 157 158 #define ARM_MAP_SHARED_RAM MAP_REGION_FLAT( \ 159 ARM_SHARED_RAM_BASE, \ 160 ARM_SHARED_RAM_SIZE, \ 161 ARM_SHARED_RAM_ATTR) 162 163 #define ARM_MAP_NS_DRAM1 MAP_REGION_FLAT( \ 164 ARM_NS_DRAM1_BASE, \ 165 ARM_NS_DRAM1_SIZE, \ 166 MT_MEMORY | MT_RW | MT_NS) 167 168 #define ARM_MAP_TSP_SEC_MEM MAP_REGION_FLAT( \ 169 TSP_SEC_MEM_BASE, \ 170 TSP_SEC_MEM_SIZE, \ 171 MT_MEMORY | MT_RW | MT_SECURE) 172 173 174 /* 175 * The number of regions like RO(code), coherent and data required by 176 * different BL stages which need to be mapped in the MMU. 177 */ 178 #if USE_COHERENT_MEM 179 #define ARM_BL_REGIONS 3 180 #else 181 #define ARM_BL_REGIONS 2 182 #endif 183 184 #define MAX_MMAP_REGIONS (PLAT_ARM_MMAP_ENTRIES + \ 185 ARM_BL_REGIONS) 186 187 /* Memory mapped Generic timer interfaces */ 188 #define ARM_SYS_CNTCTL_BASE 0x2a430000 189 #define ARM_SYS_CNTREAD_BASE 0x2a800000 190 #define ARM_SYS_TIMCTL_BASE 0x2a810000 191 192 #define ARM_CONSOLE_BAUDRATE 115200 193 194 /* Trusted Watchdog constants */ 195 #define ARM_SP805_TWDG_BASE 0x2a490000 196 #define ARM_SP805_TWDG_CLK_HZ 32768 197 /* The TBBR document specifies a watchdog timeout of 256 seconds. SP805 198 * asserts reset after two consecutive countdowns (2 x 128 = 256 sec) */ 199 #define ARM_TWDG_TIMEOUT_SEC 128 200 #define ARM_TWDG_LOAD_VAL (ARM_SP805_TWDG_CLK_HZ * \ 201 ARM_TWDG_TIMEOUT_SEC) 202 203 /****************************************************************************** 204 * Required platform porting definitions common to all ARM standard platforms 205 *****************************************************************************/ 206 207 #define ADDR_SPACE_SIZE (1ull << 32) 208 209 /* 210 * This macro defines the deepest retention state possible. A higher state 211 * id will represent an invalid or a power down state. 212 */ 213 #define PLAT_MAX_RET_STATE ARM_LOCAL_STATE_RET 214 215 /* 216 * This macro defines the deepest power down states possible. Any state ID 217 * higher than this is invalid. 218 */ 219 #define PLAT_MAX_OFF_STATE ARM_LOCAL_STATE_OFF 220 221 222 #define PLATFORM_CORE_COUNT (PLAT_ARM_CLUSTER0_CORE_COUNT + \ 223 PLAT_ARM_CLUSTER1_CORE_COUNT) 224 225 /* 226 * Some data must be aligned on the biggest cache line size in the platform. 227 * This is known only to the platform as it might have a combination of 228 * integrated and external caches. 229 */ 230 #define CACHE_WRITEBACK_GRANULE (1 << ARM_CACHE_WRITEBACK_SHIFT) 231 232 233 /******************************************************************************* 234 * BL1 specific defines. 235 * BL1 RW data is relocated from ROM to RAM at runtime so we need 2 sets of 236 * addresses. 237 ******************************************************************************/ 238 #define BL1_RO_BASE PLAT_ARM_TRUSTED_ROM_BASE 239 #define BL1_RO_LIMIT (PLAT_ARM_TRUSTED_ROM_BASE \ 240 + PLAT_ARM_TRUSTED_ROM_SIZE) 241 /* 242 * Put BL1 RW at the top of the Trusted SRAM. 243 */ 244 #define BL1_RW_BASE (ARM_BL_RAM_BASE + \ 245 ARM_BL_RAM_SIZE - \ 246 PLAT_ARM_MAX_BL1_RW_SIZE) 247 #define BL1_RW_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE) 248 249 /******************************************************************************* 250 * BL2 specific defines. 251 ******************************************************************************/ 252 /* 253 * Put BL2 just below BL31. 254 */ 255 #define BL2_BASE (BL31_BASE - PLAT_ARM_MAX_BL2_SIZE) 256 #define BL2_LIMIT BL31_BASE 257 258 /******************************************************************************* 259 * BL31 specific defines. 260 ******************************************************************************/ 261 /* 262 * Put BL31 at the top of the Trusted SRAM. 263 */ 264 #define BL31_BASE (ARM_BL_RAM_BASE + \ 265 ARM_BL_RAM_SIZE - \ 266 PLAT_ARM_MAX_BL31_SIZE) 267 #define BL31_PROGBITS_LIMIT BL1_RW_BASE 268 #define BL31_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE) 269 270 /******************************************************************************* 271 * BL32 specific defines. 272 ******************************************************************************/ 273 /* 274 * On ARM standard platforms, the TSP can execute from Trusted SRAM, 275 * Trusted DRAM (if available) or the DRAM region secured by the TrustZone 276 * controller. 277 */ 278 #if ARM_TSP_RAM_LOCATION_ID == ARM_TRUSTED_SRAM_ID 279 # define TSP_SEC_MEM_BASE ARM_BL_RAM_BASE 280 # define TSP_SEC_MEM_SIZE ARM_BL_RAM_SIZE 281 # define TSP_PROGBITS_LIMIT BL2_BASE 282 # define BL32_BASE ARM_BL_RAM_BASE 283 # define BL32_LIMIT BL31_BASE 284 #elif ARM_TSP_RAM_LOCATION_ID == ARM_TRUSTED_DRAM_ID 285 # define TSP_SEC_MEM_BASE PLAT_ARM_TRUSTED_DRAM_BASE 286 # define TSP_SEC_MEM_SIZE PLAT_ARM_TRUSTED_DRAM_SIZE 287 # define BL32_BASE PLAT_ARM_TRUSTED_DRAM_BASE 288 # define BL32_LIMIT (PLAT_ARM_TRUSTED_DRAM_BASE \ 289 + (1 << 21)) 290 #elif ARM_TSP_RAM_LOCATION_ID == ARM_DRAM_ID 291 # define TSP_SEC_MEM_BASE ARM_AP_TZC_DRAM1_BASE 292 # define TSP_SEC_MEM_SIZE ARM_AP_TZC_DRAM1_SIZE 293 # define BL32_BASE ARM_AP_TZC_DRAM1_BASE 294 # define BL32_LIMIT (ARM_AP_TZC_DRAM1_BASE + \ 295 ARM_AP_TZC_DRAM1_SIZE) 296 #else 297 # error "Unsupported ARM_TSP_RAM_LOCATION_ID value" 298 #endif 299 300 /******************************************************************************* 301 * FWU Images: NS_BL1U, BL2U & NS_BL2U defines. 302 ******************************************************************************/ 303 #define BL2U_BASE BL2_BASE 304 #define BL2U_LIMIT BL31_BASE 305 #define NS_BL2U_BASE ARM_NS_DRAM1_BASE 306 #define NS_BL1U_BASE (V2M_FLASH0_BASE + 0x03EB8000) 307 308 /* 309 * ID of the secure physical generic timer interrupt used by the TSP. 310 */ 311 #define TSP_IRQ_SEC_PHY_TIMER ARM_IRQ_SEC_PHY_TIMER 312 313 314 /* 315 * One cache line needed for bakery locks on ARM platforms 316 */ 317 #define PLAT_PERCPU_BAKERY_LOCK_SIZE (1 * CACHE_WRITEBACK_GRANULE) 318 319 320 #endif /* __ARM_DEF_H__ */ 321