1 /* 2 * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved. 3 * 4 * SPDX-License-Identifier: BSD-3-Clause 5 */ 6 7 /* 8 * This header file contains internal definitions that are not supposed to be 9 * used outside of this library code. 10 */ 11 12 #ifndef __XLAT_TABLES_V2_HELPERS_H__ 13 #define __XLAT_TABLES_V2_HELPERS_H__ 14 15 #ifndef __XLAT_TABLES_V2_H__ 16 #error "Do not include this header file directly. Include xlat_tables_v2.h instead." 17 #endif 18 19 /* Offsets into mmu_cfg_params array. All parameters are 32 bits wide. */ 20 #define MMU_CFG_MAIR0 0 21 #define MMU_CFG_TCR 1 22 #define MMU_CFG_TTBR0_LO 2 23 #define MMU_CFG_TTBR0_HI 3 24 #define MMU_CFG_PARAM_MAX 4 25 26 #ifndef __ASSEMBLY__ 27 28 #include <cassert.h> 29 #include <platform_def.h> 30 #include <stddef.h> 31 #include <xlat_tables_arch.h> 32 #include <xlat_tables_defs.h> 33 34 /* Parameters of register values required when enabling MMU */ 35 extern uint32_t mmu_cfg_params[MMU_CFG_PARAM_MAX]; 36 37 /* Forward declaration */ 38 struct mmap_region; 39 40 /* 41 * Helper macro to define an mmap_region_t. This macro allows to specify all 42 * the fields of the structure but its parameter list is not guaranteed to 43 * remain stable as we add members to mmap_region_t. 44 */ 45 #define _MAP_REGION_FULL_SPEC(_pa, _va, _sz, _attr, _gr) \ 46 { \ 47 .base_pa = (_pa), \ 48 .base_va = (_va), \ 49 .size = (_sz), \ 50 .attr = (_attr), \ 51 .granularity = (_gr), \ 52 } 53 54 /* Struct that holds all information about the translation tables. */ 55 struct xlat_ctx { 56 /* 57 * Max allowed Virtual and Physical Addresses. 58 */ 59 unsigned long long pa_max_address; 60 uintptr_t va_max_address; 61 62 /* 63 * Array of all memory regions stored in order of ascending end address 64 * and ascending size to simplify the code that allows overlapping 65 * regions. The list is terminated by the first entry with size == 0. 66 * The max size of the list is stored in `mmap_num`. `mmap` points to an 67 * array of mmap_num + 1 elements, so that there is space for the final 68 * null entry. 69 */ 70 struct mmap_region *mmap; 71 unsigned int mmap_num; 72 73 /* 74 * Array of finer-grain translation tables. 75 * For example, if the initial lookup level is 1 then this array would 76 * contain both level-2 and level-3 entries. 77 */ 78 uint64_t (*tables)[XLAT_TABLE_ENTRIES]; 79 unsigned int tables_num; 80 /* 81 * Keep track of how many regions are mapped in each table. The base 82 * table can't be unmapped so it isn't needed to keep track of it. 83 */ 84 #if PLAT_XLAT_TABLES_DYNAMIC 85 int *tables_mapped_regions; 86 #endif /* PLAT_XLAT_TABLES_DYNAMIC */ 87 88 unsigned int next_table; 89 90 /* 91 * Base translation table. It doesn't need to have the same amount of 92 * entries as the ones used for other levels. 93 */ 94 uint64_t *base_table; 95 unsigned int base_table_entries; 96 97 /* 98 * Max Physical and Virtual addresses currently in use by the 99 * translation tables. These might get updated as we map/unmap memory 100 * regions but they will never go beyond pa/va_max_address. 101 */ 102 unsigned long long max_pa; 103 uintptr_t max_va; 104 105 /* Level of the base translation table. */ 106 unsigned int base_level; 107 108 /* Set to 1 when the translation tables are initialized. */ 109 unsigned int initialized; 110 111 /* 112 * Translation regime managed by this xlat_ctx_t. It should be one of 113 * the EL*_REGIME defines. 114 */ 115 int xlat_regime; 116 }; 117 118 #if PLAT_XLAT_TABLES_DYNAMIC 119 #define _ALLOC_DYNMAP_STRUCT(_ctx_name, _xlat_tables_count) \ 120 static int _ctx_name##_mapped_regions[_xlat_tables_count]; 121 122 #define _REGISTER_DYNMAP_STRUCT(_ctx_name) \ 123 .tables_mapped_regions = _ctx_name##_mapped_regions, 124 #else 125 #define _ALLOC_DYNMAP_STRUCT(_ctx_name, _xlat_tables_count) \ 126 /* do nothing */ 127 128 #define _REGISTER_DYNMAP_STRUCT(_ctx_name) \ 129 /* do nothing */ 130 #endif /* PLAT_XLAT_TABLES_DYNAMIC */ 131 132 #define _REGISTER_XLAT_CONTEXT_FULL_SPEC(_ctx_name, _mmap_count, _xlat_tables_count, \ 133 _virt_addr_space_size, _phy_addr_space_size, \ 134 _xlat_regime, _section_name) \ 135 CASSERT(CHECK_VIRT_ADDR_SPACE_SIZE(_virt_addr_space_size), \ 136 assert_invalid_virtual_addr_space_size_for_##_ctx_name); \ 137 \ 138 CASSERT(CHECK_PHY_ADDR_SPACE_SIZE(_phy_addr_space_size), \ 139 assert_invalid_physical_addr_space_sizefor_##_ctx_name); \ 140 \ 141 static mmap_region_t _ctx_name##_mmap[_mmap_count + 1]; \ 142 \ 143 static uint64_t _ctx_name##_xlat_tables[_xlat_tables_count] \ 144 [XLAT_TABLE_ENTRIES] \ 145 __aligned(XLAT_TABLE_SIZE) __section(_section_name); \ 146 \ 147 static uint64_t _ctx_name##_base_xlat_table \ 148 [GET_NUM_BASE_LEVEL_ENTRIES(_virt_addr_space_size)] \ 149 __aligned(GET_NUM_BASE_LEVEL_ENTRIES(_virt_addr_space_size) \ 150 * sizeof(uint64_t)); \ 151 \ 152 _ALLOC_DYNMAP_STRUCT(_ctx_name, _xlat_tables_count) \ 153 \ 154 static xlat_ctx_t _ctx_name##_xlat_ctx = { \ 155 .va_max_address = (_virt_addr_space_size) - 1, \ 156 .pa_max_address = (_phy_addr_space_size) - 1, \ 157 .mmap = _ctx_name##_mmap, \ 158 .mmap_num = (_mmap_count), \ 159 .base_level = GET_XLAT_TABLE_LEVEL_BASE(_virt_addr_space_size), \ 160 .base_table = _ctx_name##_base_xlat_table, \ 161 .base_table_entries = \ 162 GET_NUM_BASE_LEVEL_ENTRIES(_virt_addr_space_size), \ 163 .tables = _ctx_name##_xlat_tables, \ 164 .tables_num = _xlat_tables_count, \ 165 _REGISTER_DYNMAP_STRUCT(_ctx_name) \ 166 .xlat_regime = (_xlat_regime), \ 167 .max_pa = 0, \ 168 .max_va = 0, \ 169 .next_table = 0, \ 170 .initialized = 0, \ 171 } 172 173 #endif /*__ASSEMBLY__*/ 174 175 #if AARCH64 176 177 /* 178 * This IMAGE_EL macro must not to be used outside the library, and it is only 179 * used in AArch64. 180 */ 181 #if defined(IMAGE_BL1) || defined(IMAGE_BL31) || (defined(IMAGE_BL2) && BL2_AT_EL3) 182 # define IMAGE_EL 3 183 # define IMAGE_XLAT_DEFAULT_REGIME EL3_REGIME 184 #else 185 # define IMAGE_EL 1 186 # define IMAGE_XLAT_DEFAULT_REGIME EL1_EL0_REGIME 187 #endif 188 189 #else /* if AARCH32 */ 190 191 /* 192 * The PL1&0 translation regime in AArch32 behaves like the EL1&0 regime in 193 * AArch64 except for the XN bits, but we set and unset them at the same time, 194 * so there's no difference in practice. 195 */ 196 #define IMAGE_XLAT_DEFAULT_REGIME EL1_EL0_REGIME 197 198 #endif /* AARCH64 */ 199 200 #endif /* __XLAT_TABLES_V2_HELPERS_H__ */ 201