1 /* 2 * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved. 3 * 4 * SPDX-License-Identifier: BSD-3-Clause 5 */ 6 7 #ifndef XLAT_TABLES_V2_H 8 #define XLAT_TABLES_V2_H 9 10 #include <xlat_tables_defs.h> 11 #include <xlat_tables_v2_helpers.h> 12 13 #ifndef __ASSEMBLY__ 14 #include <stddef.h> 15 #include <stdint.h> 16 #include <xlat_mmu_helpers.h> 17 18 /* 19 * Default granularity size for an mmap_region_t. 20 * Useful when no specific granularity is required. 21 * 22 * By default, choose the biggest possible block size allowed by the 23 * architectural state and granule size in order to minimize the number of page 24 * tables required for the mapping. 25 */ 26 #define REGION_DEFAULT_GRANULARITY XLAT_BLOCK_SIZE(MIN_LVL_BLOCK_DESC) 27 28 /* Helper macro to define an mmap_region_t. */ 29 #define MAP_REGION(_pa, _va, _sz, _attr) \ 30 MAP_REGION_FULL_SPEC(_pa, _va, _sz, _attr, REGION_DEFAULT_GRANULARITY) 31 32 /* Helper macro to define an mmap_region_t with an identity mapping. */ 33 #define MAP_REGION_FLAT(_adr, _sz, _attr) \ 34 MAP_REGION(_adr, _adr, _sz, _attr) 35 36 /* 37 * Helper macro to define entries for mmap_region_t. It allows to define 'pa' 38 * and sets 'va' to 0 for each region. To be used with mmap_add_alloc_va(). 39 */ 40 #define MAP_REGION_ALLOC_VA(pa, sz, attr) MAP_REGION(pa, 0, sz, attr) 41 42 /* 43 * Helper macro to define an mmap_region_t to map with the desired granularity 44 * of translation tables. 45 * 46 * The granularity value passed to this macro must be a valid block or page 47 * size. When using a 4KB translation granule, this might be 4KB, 2MB or 1GB. 48 * Passing REGION_DEFAULT_GRANULARITY is also allowed and means that the library 49 * is free to choose the granularity for this region. In this case, it is 50 * equivalent to the MAP_REGION() macro. 51 */ 52 #define MAP_REGION2(_pa, _va, _sz, _attr, _gr) \ 53 MAP_REGION_FULL_SPEC(_pa, _va, _sz, _attr, _gr) 54 55 /* 56 * Shifts and masks to access fields of an mmap attribute 57 */ 58 #define MT_TYPE_MASK U(0x7) 59 #define MT_TYPE(_attr) ((_attr) & MT_TYPE_MASK) 60 /* Access permissions (RO/RW) */ 61 #define MT_PERM_SHIFT U(3) 62 /* Security state (SECURE/NS) */ 63 #define MT_SEC_SHIFT U(4) 64 /* Access permissions for instruction execution (EXECUTE/EXECUTE_NEVER) */ 65 #define MT_EXECUTE_SHIFT U(5) 66 /* In the EL1&0 translation regime, User (EL0) or Privileged (EL1). */ 67 #define MT_USER_SHIFT U(6) 68 /* All other bits are reserved */ 69 70 /* 71 * Memory mapping attributes 72 */ 73 74 /* 75 * Memory types supported. 76 * These are organised so that, going down the list, the memory types are 77 * getting weaker; conversely going up the list the memory types are getting 78 * stronger. 79 */ 80 #define MT_DEVICE U(0) 81 #define MT_NON_CACHEABLE U(1) 82 #define MT_MEMORY U(2) 83 /* Values up to 7 are reserved to add new memory types in the future */ 84 85 #define MT_RO (U(0) << MT_PERM_SHIFT) 86 #define MT_RW (U(1) << MT_PERM_SHIFT) 87 88 #define MT_SECURE (U(0) << MT_SEC_SHIFT) 89 #define MT_NS (U(1) << MT_SEC_SHIFT) 90 91 /* 92 * Access permissions for instruction execution are only relevant for normal 93 * read-only memory, i.e. MT_MEMORY | MT_RO. They are ignored (and potentially 94 * overridden) otherwise: 95 * - Device memory is always marked as execute-never. 96 * - Read-write normal memory is always marked as execute-never. 97 */ 98 #define MT_EXECUTE (U(0) << MT_EXECUTE_SHIFT) 99 #define MT_EXECUTE_NEVER (U(1) << MT_EXECUTE_SHIFT) 100 101 /* 102 * When mapping a region at EL0 or EL1, this attribute will be used to determine 103 * if a User mapping (EL0) will be created or a Privileged mapping (EL1). 104 */ 105 #define MT_USER (U(1) << MT_USER_SHIFT) 106 #define MT_PRIVILEGED (U(0) << MT_USER_SHIFT) 107 108 /* Compound attributes for most common usages */ 109 #define MT_CODE (MT_MEMORY | MT_RO | MT_EXECUTE) 110 #define MT_RO_DATA (MT_MEMORY | MT_RO | MT_EXECUTE_NEVER) 111 #define MT_RW_DATA (MT_MEMORY | MT_RW | MT_EXECUTE_NEVER) 112 113 /* 114 * Structure for specifying a single region of memory. 115 */ 116 typedef struct mmap_region { 117 unsigned long long base_pa; 118 uintptr_t base_va; 119 size_t size; 120 unsigned int attr; 121 /* Desired granularity. See the MAP_REGION2() macro for more details. */ 122 size_t granularity; 123 } mmap_region_t; 124 125 /* 126 * Translation regimes supported by this library. EL_REGIME_INVALID tells the 127 * library to detect it at runtime. 128 */ 129 #define EL1_EL0_REGIME 1 130 #define EL2_REGIME 2 131 #define EL3_REGIME 3 132 #define EL_REGIME_INVALID -1 133 134 /* 135 * Declare the translation context type. 136 * Its definition is private. 137 */ 138 typedef struct xlat_ctx xlat_ctx_t; 139 140 /* 141 * Statically allocate a translation context and associated structures. Also 142 * initialize them. 143 * 144 * _ctx_name: 145 * Prefix for the translation context variable. 146 * E.g. If _ctx_name is 'foo', the variable will be called 'foo_xlat_ctx'. 147 * Useful to distinguish multiple contexts from one another. 148 * 149 * _mmap_count: 150 * Number of mmap_region_t to allocate. 151 * Would typically be MAX_MMAP_REGIONS for the translation context describing 152 * the BL image currently executing. 153 * 154 * _xlat_tables_count: 155 * Number of sub-translation tables to allocate. 156 * Would typically be MAX_XLAT_TABLES for the translation context describing 157 * the BL image currently executing. 158 * Note that this is only for sub-tables ; at the initial lookup level, there 159 * is always a single table. 160 * 161 * _virt_addr_space_size, _phy_addr_space_size: 162 * Size (in bytes) of the virtual (resp. physical) address space. 163 * Would typically be PLAT_VIRT_ADDR_SPACE_SIZE 164 * (resp. PLAT_PHY_ADDR_SPACE_SIZE) for the translation context describing the 165 * BL image currently executing. 166 */ 167 #define REGISTER_XLAT_CONTEXT(_ctx_name, _mmap_count, _xlat_tables_count, \ 168 _virt_addr_space_size, _phy_addr_space_size) \ 169 REGISTER_XLAT_CONTEXT_FULL_SPEC(_ctx_name, (_mmap_count), \ 170 (_xlat_tables_count), \ 171 (_virt_addr_space_size), \ 172 (_phy_addr_space_size), \ 173 EL_REGIME_INVALID, "xlat_table") 174 175 /* 176 * Same as REGISTER_XLAT_CONTEXT plus the additional parameters: 177 * 178 * _xlat_regime: 179 * Specify the translation regime managed by this xlat_ctx_t instance. The 180 * values are the one from the EL*_REGIME definitions. 181 * 182 * _section_name: 183 * Specify the name of the section where the translation tables have to be 184 * placed by the linker. 185 */ 186 #define REGISTER_XLAT_CONTEXT2(_ctx_name, _mmap_count, _xlat_tables_count, \ 187 _virt_addr_space_size, _phy_addr_space_size, \ 188 _xlat_regime, _section_name) \ 189 REGISTER_XLAT_CONTEXT_FULL_SPEC(_ctx_name, (_mmap_count), \ 190 (_xlat_tables_count), \ 191 (_virt_addr_space_size), \ 192 (_phy_addr_space_size), \ 193 (_xlat_regime), (_section_name)) 194 195 /****************************************************************************** 196 * Generic translation table APIs. 197 * Each API comes in 2 variants: 198 * - one that acts on the current translation context for this BL image 199 * - another that acts on the given translation context instead. This variant 200 * is named after the 1st version, with an additional '_ctx' suffix. 201 *****************************************************************************/ 202 203 /* 204 * Initialize translation tables from the current list of mmap regions. Calling 205 * this function marks the transition point after which static regions can no 206 * longer be added. 207 */ 208 void init_xlat_tables(void); 209 void init_xlat_tables_ctx(xlat_ctx_t *ctx); 210 211 /* 212 * Add a static region with defined base PA and base VA. This function can only 213 * be used before initializing the translation tables. The region cannot be 214 * removed afterwards. 215 */ 216 void mmap_add_region(unsigned long long base_pa, uintptr_t base_va, 217 size_t size, unsigned int attr); 218 void mmap_add_region_ctx(xlat_ctx_t *ctx, const mmap_region_t *mm); 219 220 /* 221 * Add an array of static regions with defined base PA and base VA. This 222 * function can only be used before initializing the translation tables. The 223 * regions cannot be removed afterwards. 224 */ 225 void mmap_add(const mmap_region_t *mm); 226 void mmap_add_ctx(xlat_ctx_t *ctx, const mmap_region_t *mm); 227 228 /* 229 * Add a region with defined base PA. Returns base VA calculated using the 230 * highest existing region in the mmap array even if it fails to allocate the 231 * region. 232 */ 233 void mmap_add_region_alloc_va(unsigned long long base_pa, uintptr_t *base_va, 234 size_t size, unsigned int attr); 235 void mmap_add_region_alloc_va_ctx(xlat_ctx_t *ctx, mmap_region_t *mm); 236 237 /* 238 * Add an array of static regions with defined base PA, and fill the base VA 239 * field on the array of structs. This function can only be used before 240 * initializing the translation tables. The regions cannot be removed afterwards. 241 */ 242 void mmap_add_alloc_va(mmap_region_t *mm); 243 244 #if PLAT_XLAT_TABLES_DYNAMIC 245 /* 246 * Add a dynamic region with defined base PA and base VA. This type of region 247 * can be added and removed even after the translation tables are initialized. 248 * 249 * Returns: 250 * 0: Success. 251 * EINVAL: Invalid values were used as arguments. 252 * ERANGE: Memory limits were surpassed. 253 * ENOMEM: Not enough space in the mmap array or not enough free xlat tables. 254 * EPERM: It overlaps another region in an invalid way. 255 */ 256 int mmap_add_dynamic_region(unsigned long long base_pa, uintptr_t base_va, 257 size_t size, unsigned int attr); 258 int mmap_add_dynamic_region_ctx(xlat_ctx_t *ctx, mmap_region_t *mm); 259 260 /* 261 * Add a dynamic region with defined base PA. Returns base VA calculated using 262 * the highest existing region in the mmap array even if it fails to allocate 263 * the region. 264 * 265 * mmap_add_dynamic_region_alloc_va() returns the allocated VA in 'base_va'. 266 * mmap_add_dynamic_region_alloc_va_ctx() returns it in 'mm->base_va'. 267 * 268 * It returns the same error values as mmap_add_dynamic_region(). 269 */ 270 int mmap_add_dynamic_region_alloc_va(unsigned long long base_pa, 271 uintptr_t *base_va, 272 size_t size, unsigned int attr); 273 int mmap_add_dynamic_region_alloc_va_ctx(xlat_ctx_t *ctx, mmap_region_t *mm); 274 275 /* 276 * Remove a region with the specified base VA and size. Only dynamic regions can 277 * be removed, and they can be removed even if the translation tables are 278 * initialized. 279 * 280 * Returns: 281 * 0: Success. 282 * EINVAL: The specified region wasn't found. 283 * EPERM: Trying to remove a static region. 284 */ 285 int mmap_remove_dynamic_region(uintptr_t base_va, size_t size); 286 int mmap_remove_dynamic_region_ctx(xlat_ctx_t *ctx, 287 uintptr_t base_va, 288 size_t size); 289 290 #endif /* PLAT_XLAT_TABLES_DYNAMIC */ 291 292 /* 293 * Change the memory attributes of the memory region starting from a given 294 * virtual address in a set of translation tables. 295 * 296 * This function can only be used after the translation tables have been 297 * initialized. 298 * 299 * The base address of the memory region must be aligned on a page boundary. 300 * The size of this memory region must be a multiple of a page size. 301 * The memory region must be already mapped by the given translation tables 302 * and it must be mapped at the granularity of a page. 303 * 304 * Return 0 on success, a negative value on error. 305 * 306 * In case of error, the memory attributes remain unchanged and this function 307 * has no effect. 308 * 309 * ctx 310 * Translation context to work on. 311 * base_va: 312 * Virtual address of the 1st page to change the attributes of. 313 * size: 314 * Size in bytes of the memory region. 315 * attr: 316 * New attributes of the page tables. The attributes that can be changed are 317 * data access (MT_RO/MT_RW), instruction access (MT_EXECUTE_NEVER/MT_EXECUTE) 318 * and user/privileged access (MT_USER/MT_PRIVILEGED) in the case of contexts 319 * that are used in the EL1&0 translation regime. Also, note that this 320 * function doesn't allow to remap a region as RW and executable, or to remap 321 * device memory as executable. 322 * 323 * NOTE: The caller of this function must be able to write to the translation 324 * tables, i.e. the memory where they are stored must be mapped with read-write 325 * access permissions. This function assumes it is the case. If this is not 326 * the case then this function might trigger a data abort exception. 327 * 328 * NOTE2: The caller is responsible for making sure that the targeted 329 * translation tables are not modified by any other code while this function is 330 * executing. 331 */ 332 int xlat_change_mem_attributes_ctx(const xlat_ctx_t *ctx, uintptr_t base_va, 333 size_t size, uint32_t attr); 334 int xlat_change_mem_attributes(uintptr_t base_va, size_t size, uint32_t attr); 335 336 /* 337 * Query the memory attributes of a memory page in a set of translation tables. 338 * 339 * Return 0 on success, a negative error code on error. 340 * On success, the attributes are stored into *attr. 341 * 342 * ctx 343 * Translation context to work on. 344 * base_va 345 * Virtual address of the page to get the attributes of. 346 * There are no alignment restrictions on this address. The attributes of the 347 * memory page it lies within are returned. 348 * attr 349 * Output parameter where to store the attributes of the targeted memory page. 350 */ 351 int xlat_get_mem_attributes_ctx(const xlat_ctx_t *ctx, uintptr_t base_va, 352 uint32_t *attr); 353 int xlat_get_mem_attributes(uintptr_t base_va, uint32_t *attr); 354 355 #endif /*__ASSEMBLY__*/ 356 #endif /* XLAT_TABLES_V2_H */ 357