xref: /rk3399_ARM-atf/drivers/st/bsec/bsec3.c (revision 68eacbbf852603a61a6add94f91db093cf30e86f) 
1 /*
2  * Copyright (c) 2024-2026, STMicroelectronics - All Rights Reserved
3  *
4  * SPDX-License-Identifier: BSD-3-Clause
5  */
6 
7 #include <assert.h>
8 #include <limits.h>
9 
10 #include <arch_helpers.h>
11 #include <common/debug.h>
12 #include <drivers/st/bsec.h>
13 #include <drivers/st/bsec3_reg.h>
14 #include <drivers/st/stm32mp_reset.h>
15 #include <lib/mmio.h>
16 #include <lib/spinlock.h>
17 #include <libfdt.h>
18 
19 #include <platform_def.h>
20 
21 #define BSEC_IP_VERSION_1_0	U(0x10)
22 #define BSEC_IP_VERSION_1_2	U(0x12)
23 #define BSEC_IP_ID_3		U(0x100033)
24 
25 #define MAX_NB_TRIES		U(3)
26 
27 /*
28  * IP configuration
29  */
30 #define BSEC_OTP_MASK			GENMASK_32(4, 0)
31 #define BSEC_OTP_BANK_SHIFT		U(5)
32 #define BSEC_TIMEOUT_VALUE		U(0x800000) /* ~7sec @1.2GHz */
33 
34 static uint32_t otp_bank(uint32_t otp)
35 {
36 	if (otp > STM32MP2_OTP_MAX_ID) {
37 		panic();
38 	}
39 
40 	return (otp & ~BSEC_OTP_MASK) >> BSEC_OTP_BANK_SHIFT;
41 }
42 
43 static uint32_t otp_bit_mask(uint32_t otp)
44 {
45 	return BIT(otp & BSEC_OTP_MASK);
46 }
47 
48 /*
49  * bsec_get_status: return status register value.
50  */
51 static uint32_t bsec_get_status(void)
52 {
53 	return mmio_read_32(BSEC_BASE + BSEC_OTPSR);
54 }
55 
56 /*
57  * bsec_get_version: return BSEC version.
58  */
59 static uint32_t bsec_get_version(void)
60 {
61 	return mmio_read_32(BSEC_BASE + BSEC_VERR) & BSEC_VERR_MASK;
62 }
63 
64 /*
65  * bsec_get_id: return BSEC ID.
66  */
67 static uint32_t bsec_get_id(void)
68 {
69 	return mmio_read_32(BSEC_BASE + BSEC_IPIDR);
70 }
71 
72 static bool is_fuse_shadowed(uint32_t otp)
73 {
74 	uint32_t bank = otp_bank(otp);
75 	uint32_t otp_mask = otp_bit_mask(otp);
76 	uint32_t bank_value;
77 
78 	bank_value = mmio_read_32(BSEC_BASE + BSEC_SFSR(bank));
79 
80 	if ((bank_value & otp_mask) != 0U) {
81 		return true;
82 	}
83 
84 	return false;
85 }
86 
87 static void poll_otp_status_busy(void)
88 {
89 	uint32_t timeout = BSEC_TIMEOUT_VALUE;
90 
91 	while (((bsec_get_status() & BSEC_OTPSR_BUSY) != 0U) && (timeout != 0U)) {
92 		timeout--;
93 	}
94 
95 	if ((bsec_get_status() & BSEC_OTPSR_BUSY) != 0U) {
96 		ERROR("BSEC timeout\n");
97 		panic();
98 	}
99 }
100 
101 static uint32_t check_read_error(uint32_t otp)
102 {
103 	uint32_t status = bsec_get_status();
104 
105 	if ((status & BSEC_OTPSR_SECF) != 0U) {
106 		VERBOSE("BSEC read %u single error correction detected\n", otp);
107 	}
108 
109 	if ((status & BSEC_OTPSR_PPLF) != 0U) {
110 		VERBOSE("BSEC read %u permanent programming lock detected.\n", otp);
111 	}
112 
113 	if ((status & BSEC_OTPSR_PPLMF) != 0U) {
114 		ERROR("BSEC read %u error 0x%x\n", otp, status);
115 		return BSEC_ERROR;
116 	}
117 
118 	if ((status & (BSEC_OTPSR_DISTURBF | BSEC_OTPSR_DEDF | BSEC_OTPSR_AMEF)) != 0U) {
119 		ERROR("BSEC read %u error 0x%x with invalid FVR\n", otp, status);
120 		return BSEC_RETRY;
121 	}
122 
123 	return BSEC_OK;
124 }
125 
126 static uint32_t check_program_error(uint32_t otp)
127 {
128 	uint32_t status = bsec_get_status();
129 
130 	if ((status & BSEC_OTPSR_PROGFAIL) != 0U) {
131 		ERROR("BSEC program %u error 0x%x\n", otp, status);
132 		return BSEC_RETRY;
133 	}
134 
135 	return BSEC_OK;
136 }
137 
138 static void check_reset_error(void)
139 {
140 	uint32_t status = bsec_get_status();
141 
142 	/* check initial status reporting */
143 	if ((status & BSEC_OTPSR_BUSY) != 0U) {
144 		VERBOSE("BSEC reset and busy when OTPSR read\n");
145 	}
146 	if ((status & BSEC_OTPSR_HIDEUP) != 0U) {
147 		VERBOSE("BSEC upper fuse are not accessible (HIDEUP)\n");
148 	}
149 	if ((status & BSEC_OTPSR_OTPSEC) != 0U) {
150 		VERBOSE("BSEC reset single error correction detected\n");
151 	}
152 	if ((status & BSEC_OTPSR_OTPNVIR) == 0U) {
153 		VERBOSE("BSEC reset first fuse word 0 is detected zero\n");
154 	}
155 	if ((status & BSEC_OTPSR_OTPERR) != 0U) {
156 		ERROR("BSEC reset critical error 0x%x\n", status);
157 		panic();
158 	}
159 	if ((status & BSEC_OTPSR_INIT_DONE) != BSEC_OTPSR_INIT_DONE) {
160 		ERROR("BSEC reset critical error 0x%x\n", status);
161 		panic();
162 	}
163 }
164 
165 static bool is_bsec_write_locked(void)
166 {
167 	return (mmio_read_32(BSEC_BASE + BSEC_LOCKR) & BSEC_LOCKR_GWLOCK_MASK) != 0U;
168 }
169 
170 /*
171  * bsec_probe: initialize BSEC driver.
172  * return value: BSEC_OK if no error.
173  */
174 uint32_t bsec_probe(void)
175 {
176 	uint32_t version = bsec_get_version();
177 	uint32_t id = bsec_get_id();
178 
179 #if STM32MP21
180 	if ((version != BSEC_IP_VERSION_1_2) || (id != BSEC_IP_ID_3)) {
181 #else /* STM32MP21 */
182 	if ((version != BSEC_IP_VERSION_1_0) || (id != BSEC_IP_ID_3)) {
183 #endif /* STM32MP21 */
184 		EARLY_ERROR("%s: version = 0x%x, id = 0x%x\n", __func__, version, id);
185 		panic();
186 	}
187 
188 	check_reset_error();
189 
190 	return BSEC_OK;
191 }
192 
193 /*
194  * bsec_shadow_register: copy SAFMEM OTP to BSEC data.
195  * otp: OTP number.
196  * return value: BSEC_OK if no error.
197  */
198 static uint32_t bsec_shadow_register(uint32_t otp)
199 {
200 	uint32_t result;
201 	uint32_t i;
202 	bool value;
203 
204 	result = bsec_read_sr_lock(otp, &value);
205 	if (result != BSEC_OK) {
206 		WARN("BSEC: %u Sticky-read bit read Error %u\n", otp, result);
207 	} else if (value) {
208 		VERBOSE("BSEC: OTP %u is locked and will not be refreshed\n", otp);
209 	}
210 
211 	for (i = 0U; i < MAX_NB_TRIES; i++) {
212 		mmio_write_32(BSEC_BASE + BSEC_OTPCR, otp);
213 
214 		poll_otp_status_busy();
215 
216 		result = check_read_error(otp);
217 		if (result != BSEC_RETRY) {
218 			break;
219 		}
220 	}
221 
222 	return result;
223 }
224 
225 /*
226  * bsec_write_otp: write a value in shadow OTP.
227  * val: value to program.
228  * otp: OTP number.
229  * return value: BSEC_OK if no error.
230  */
231 uint32_t bsec_write_otp(uint32_t val, uint32_t otp)
232 {
233 	bool state;
234 	uint32_t result;
235 
236 	if (otp > STM32MP2_OTP_MAX_ID) {
237 		panic();
238 	}
239 
240 	if (!is_fuse_shadowed(otp)) {
241 		return BSEC_ERROR;
242 	}
243 
244 	if (is_bsec_write_locked()) {
245 		return BSEC_WRITE_LOCKED;
246 	}
247 
248 	result = bsec_read_sw_lock(otp, &state);
249 	if (result != BSEC_OK) {
250 		WARN("Shadow register is SW locked\n");
251 		return result;
252 	}
253 
254 	mmio_write_32(BSEC_BASE + BSEC_FVR(otp), val);
255 
256 	return BSEC_OK;
257 }
258 
259 /*
260  * bsec_program_otp: program a bit in SAFMEM after the prog.
261  *	The OTP data is not refreshed.
262  * val: value to program.
263  * otp: OTP number.
264  * return value: BSEC_OK if no error.
265  */
266 uint32_t bsec_program_otp(uint32_t val, uint32_t otp)
267 {
268 	uint32_t result;
269 	uint32_t i;
270 	bool value;
271 
272 	if (otp > STM32MP2_OTP_MAX_ID) {
273 		panic();
274 	}
275 
276 	if (is_bsec_write_locked() == true) {
277 		return BSEC_WRITE_LOCKED;
278 	}
279 
280 	result = bsec_read_sp_lock(otp, &value);
281 	if (result != BSEC_OK) {
282 		WARN("BSEC: %u Sticky-prog bit read Error %u\n", otp, result);
283 	} else if (value) {
284 		WARN("BSEC: OTP locked, prog will be ignored\n");
285 		return BSEC_WRITE_LOCKED;
286 	}
287 
288 	mmio_write_32(BSEC_BASE + BSEC_WDR, val);
289 
290 	for (i = 0U; i < MAX_NB_TRIES; i++) {
291 		mmio_write_32(BSEC_BASE + BSEC_OTPCR, otp | BSEC_OTPCR_PROG);
292 
293 		poll_otp_status_busy();
294 
295 		result = check_program_error(otp);
296 		if (result != BSEC_RETRY) {
297 			break;
298 		}
299 	}
300 
301 	return result;
302 }
303 
304 /*
305  * bsec_read_debug_conf: read debug configuration.
306  */
307 uint32_t bsec_read_debug_conf(void)
308 {
309 	return mmio_read_32(BSEC_BASE + BSEC_DENR);
310 }
311 
312 static uint32_t bsec_lock_register_set(uint32_t offset, uint32_t mask)
313 {
314 	uint32_t value = mmio_read_32(BSEC_BASE + offset);
315 
316 	/* The lock is already set */
317 	if ((value & mask) != 0U) {
318 		return BSEC_OK;
319 	}
320 
321 	if (is_bsec_write_locked()) {
322 		return BSEC_WRITE_LOCKED;
323 	}
324 
325 	value |= mask;
326 
327 	mmio_write_32(BSEC_BASE + offset, value);
328 
329 	return BSEC_OK;
330 }
331 
332 static bool bsec_lock_register_get(uint32_t offset, uint32_t mask)
333 {
334 	uint32_t value = mmio_read_32(BSEC_BASE + offset);
335 
336 	return (value & mask) != 0U;
337 }
338 
339 /*
340  * bsec_set_sr_lock: set shadow-read lock.
341  * otp: OTP number.
342  * return value: BSEC_OK if no error.
343  */
344 uint32_t bsec_set_sr_lock(uint32_t otp)
345 {
346 	uint32_t bank = otp_bank(otp);
347 	uint32_t otp_mask = otp_bit_mask(otp);
348 
349 	if (otp > STM32MP2_OTP_MAX_ID) {
350 		panic();
351 	}
352 
353 	return bsec_lock_register_set(BSEC_SRLOCK(bank), otp_mask);
354 }
355 
356 /*
357  * bsec_read_sr_lock: read shadow-read lock.
358  * otp: OTP number.
359  * value: read value (true or false).
360  * return value: BSEC_OK if no error.
361  */
362 uint32_t bsec_read_sr_lock(uint32_t otp, bool *value)
363 {
364 	uint32_t bank = otp_bank(otp);
365 	uint32_t otp_mask = otp_bit_mask(otp);
366 
367 	assert(value != NULL);
368 	if (otp > STM32MP2_OTP_MAX_ID) {
369 		panic();
370 	}
371 
372 	*value = bsec_lock_register_get(BSEC_SRLOCK(bank), otp_mask);
373 
374 	return BSEC_OK;
375 }
376 
377 /*
378  * bsec_set_sw_lock: set shadow-write lock.
379  * otp: OTP number.
380  * return value: BSEC_OK if no error.
381  */
382 uint32_t bsec_set_sw_lock(uint32_t otp)
383 {
384 	uint32_t bank = otp_bank(otp);
385 	uint32_t otp_mask = otp_bit_mask(otp);
386 
387 	if (otp > STM32MP2_OTP_MAX_ID) {
388 		panic();
389 	}
390 
391 	return bsec_lock_register_set(BSEC_SWLOCK(bank), otp_mask);
392 }
393 
394 /*
395  * bsec_read_sw_lock: read shadow-write lock.
396  * otp: OTP number.
397  * value: read value (true or false).
398  * return value: BSEC_OK if no error.
399  */
400 uint32_t bsec_read_sw_lock(uint32_t otp, bool *value)
401 {
402 	uint32_t bank = otp_bank(otp);
403 	uint32_t otp_mask = otp_bit_mask(otp);
404 
405 	assert(value != NULL);
406 	if (otp > STM32MP2_OTP_MAX_ID) {
407 		panic();
408 	}
409 
410 	*value = bsec_lock_register_get(BSEC_SWLOCK(bank), otp_mask);
411 
412 	return BSEC_OK;
413 }
414 
415 /*
416  * bsec_set_sp_lock: set shadow-program lock.
417  * otp: OTP number.
418  * return value: BSEC_OK if no error.
419  */
420 uint32_t bsec_set_sp_lock(uint32_t otp)
421 {
422 	uint32_t bank = otp_bank(otp);
423 	uint32_t otp_mask = otp_bit_mask(otp);
424 
425 	if (otp > STM32MP2_OTP_MAX_ID) {
426 		panic();
427 	}
428 
429 	return bsec_lock_register_set(BSEC_SPLOCK(bank), otp_mask);
430 }
431 
432 /*
433  * bsec_read_sp_lock: read shadow-program lock.
434  * otp: OTP number.
435  * value: read value (true or false).
436  * return value: BSEC_OK if no error.
437  */
438 uint32_t bsec_read_sp_lock(uint32_t otp, bool *value)
439 {
440 	uint32_t bank = otp_bank(otp);
441 	uint32_t otp_mask = otp_bit_mask(otp);
442 
443 	assert(value != NULL);
444 	if (otp > STM32MP2_OTP_MAX_ID) {
445 		panic();
446 	}
447 
448 	*value = bsec_lock_register_get(BSEC_SPLOCK(bank), otp_mask);
449 
450 	return BSEC_OK;
451 }
452 
453 /*
454  * bsec_get_secure_state: read state in BSEC status register.
455  * return: secure state
456  */
457 uint32_t bsec_get_secure_state(void)
458 {
459 	uint32_t state = BSEC_STATE_INVALID;
460 	uint32_t status = bsec_get_status();
461 	uint32_t bsec_sr = mmio_read_32(BSEC_BASE + BSEC_SR);
462 
463 	if ((status & BSEC_OTPSR_INIT_DONE) == BSEC_OTPSR_INIT_DONE) {
464 		/* NVSTATE is only valid if INIT_DONE */
465 		uint32_t nvstates = (bsec_sr & BSEC_SR_NVSTATE_MASK) >> BSEC_SR_NVSTATE_SHIFT;
466 
467 		if (nvstates == BSEC_SR_NVSTATE_OPEN) {
468 			state = BSEC_STATE_SEC_OPEN;
469 		} else if (nvstates == BSEC_SR_NVSTATE_CLOSED) {
470 			state = BSEC_STATE_SEC_CLOSED;
471 		} else {
472 			VERBOSE("%s nvstates = %u\n", __func__, nvstates);
473 		}
474 	}
475 
476 	return state;
477 }
478 
479 /*
480  * bsec_shadow_read_otp: Load OTP from SAFMEM and provide its value
481  * val: read value.
482  * otp: OTP number.
483  * return value: BSEC_OK if no error.
484  */
485 uint32_t bsec_shadow_read_otp(uint32_t *val, uint32_t otp)
486 {
487 	assert(val != NULL);
488 	if (otp > STM32MP2_OTP_MAX_ID) {
489 		panic();
490 	}
491 
492 	*val = 0U;
493 
494 	if (is_bsec_write_locked()) {
495 		return BSEC_WRITE_LOCKED;
496 	}
497 
498 	if (!is_fuse_shadowed(otp)) {
499 		uint32_t result = bsec_shadow_register(otp);
500 
501 		if (result != BSEC_OK) {
502 			ERROR("BSEC: %u Shadowing Error %u\n", otp, result);
503 			return result;
504 		}
505 	}
506 
507 	*val = mmio_read_32(BSEC_BASE + BSEC_FVR(otp));
508 
509 	return BSEC_OK;
510 }
511 
512 /*
513  * bsec_read_otp: read an OTP data value.
514  * val: read value.
515  * otp: OTP number.
516  * return value: BSEC_OK if no error.
517  */
518 uint32_t bsec_read_otp(uint32_t *val, uint32_t otp)
519 {
520 	assert(val != NULL);
521 	if (otp > STM32MP2_OTP_MAX_ID) {
522 		panic();
523 	}
524 
525 	return bsec_shadow_read_otp(val, otp);
526 }
527