1 /* 2 * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved. 3 * 4 * SPDX-License-Identifier: BSD-3-Clause 5 */ 6 7 #include <assert.h> 8 #include <debug.h> 9 #include <mmio.h> 10 #include <tzc_dmc500.h> 11 #include "tzc_common.h" 12 #include "tzc_common_private.h" 13 14 /* 15 * Macros which will be used by common core functions. 16 */ 17 #define TZC_DMC500_REGION_BASE_LOW_0_OFFSET 0x054 18 #define TZC_DMC500_REGION_BASE_HIGH_0_OFFSET 0x058 19 #define TZC_DMC500_REGION_TOP_LOW_0_OFFSET 0x05C 20 #define TZC_DMC500_REGION_TOP_HIGH_0_OFFSET 0x060 21 #define TZC_DMC500_REGION_ATTR_0_OFFSET 0x064 22 #define TZC_DMC500_REGION_ID_ACCESS_0_OFFSET 0x068 23 24 #define TZC_DMC500_ACTION_OFF 0x50 25 26 /* Pointer to the tzc_dmc500_driver_data structure populated by the platform */ 27 static const tzc_dmc500_driver_data_t *g_driver_data; 28 static unsigned int g_sys_if_count; 29 30 #define verify_region_attr(region, attr) \ 31 ((g_conf_regions[(region)].sec_attr == \ 32 ((attr) >> TZC_REGION_ATTR_SEC_SHIFT)) \ 33 && ((attr) & (0x1 << TZC_REGION_ATTR_F_EN_SHIFT))) 34 35 /* 36 * Structure for configured regions attributes in DMC500. 37 */ 38 typedef struct tzc_dmc500_regions { 39 unsigned int sec_attr; 40 int is_enabled; 41 } tzc_dmc500_regions_t; 42 43 /* 44 * Array storing the attributes of the configured regions. This array 45 * will be used by the `tzc_dmc500_verify_complete` to verify the flush 46 * completion. 47 */ 48 static tzc_dmc500_regions_t g_conf_regions[MAX_REGION_VAL + 1]; 49 50 /* Helper Macros for making the code readable */ 51 #define DMC_INST_BASE_ADDR(instance) (g_driver_data->dmc_base[instance]) 52 #define DMC_INST_SI_BASE(instance, interface) \ 53 (DMC_INST_BASE_ADDR(instance) + IFACE_OFFSET(interface)) 54 55 DEFINE_TZC_COMMON_WRITE_ACTION(_dmc500, DMC500) 56 DEFINE_TZC_COMMON_WRITE_REGION_BASE(_dmc500, DMC500) 57 DEFINE_TZC_COMMON_WRITE_REGION_TOP(_dmc500, DMC500) 58 DEFINE_TZC_COMMON_WRITE_REGION_ATTRIBUTES(_dmc500, DMC500) 59 DEFINE_TZC_COMMON_WRITE_REGION_ID_ACCESS(_dmc500, DMC500) 60 61 DEFINE_TZC_COMMON_CONFIGURE_REGION0(_dmc500) 62 DEFINE_TZC_COMMON_CONFIGURE_REGION(_dmc500) 63 64 static inline unsigned int _tzc_dmc500_read_region_attr_0( 65 uintptr_t dmc_si_base, 66 unsigned int region_no) 67 { 68 return mmio_read_32(dmc_si_base + 69 TZC_REGION_OFFSET(TZC_DMC500_REGION_SIZE, region_no) + 70 TZC_DMC500_REGION_ATTR_0_OFFSET); 71 } 72 73 static inline void _tzc_dmc500_write_flush_control(uintptr_t dmc_si_base) 74 { 75 mmio_write_32(dmc_si_base + SI_FLUSH_CTRL_OFFSET, 1); 76 } 77 78 /* 79 * Sets the Flush controls for all the DMC Instances and System Interfaces. 80 * This initiates the flush of configuration settings from the shadow 81 * registers to the actual configuration register. The caller should poll 82 * changed register to confirm update. 83 */ 84 void tzc_dmc500_config_complete(void) 85 { 86 int dmc_inst, sys_if; 87 88 assert(g_driver_data); 89 90 for (dmc_inst = 0; dmc_inst < g_driver_data->dmc_count; dmc_inst++) { 91 assert(DMC_INST_BASE_ADDR(dmc_inst)); 92 for (sys_if = 0; sys_if < g_sys_if_count; sys_if++) 93 _tzc_dmc500_write_flush_control( 94 DMC_INST_SI_BASE(dmc_inst, sys_if)); 95 } 96 } 97 98 /* 99 * This function reads back the secure attributes from the configuration 100 * register for each DMC Instance and System Interface and compares it with 101 * the configured value. The successful verification of the region attributes 102 * confirms that the flush operation has completed. 103 * If the verification fails, the caller is expected to invoke this API again 104 * till it succeeds. 105 * Returns 0 on success and 1 on failure. 106 */ 107 int tzc_dmc500_verify_complete(void) 108 { 109 int dmc_inst, sys_if, region_no; 110 unsigned int attr; 111 112 assert(g_driver_data); 113 /* Region 0 must be configured */ 114 assert(g_conf_regions[0].is_enabled); 115 116 /* Iterate over all configured regions */ 117 for (region_no = 0; region_no <= MAX_REGION_VAL; region_no++) { 118 if (!g_conf_regions[region_no].is_enabled) 119 continue; 120 for (dmc_inst = 0; dmc_inst < g_driver_data->dmc_count; 121 dmc_inst++) { 122 assert(DMC_INST_BASE_ADDR(dmc_inst)); 123 for (sys_if = 0; sys_if < g_sys_if_count; 124 sys_if++) { 125 attr = _tzc_dmc500_read_region_attr_0( 126 DMC_INST_SI_BASE(dmc_inst, sys_if), 127 region_no); 128 VERBOSE("Verifying DMC500 region:%d" 129 " dmc_inst:%d sys_if:%d attr:%x\n", 130 region_no, dmc_inst, sys_if, attr); 131 if (!verify_region_attr(region_no, attr)) 132 return 1; 133 } 134 } 135 } 136 137 return 0; 138 } 139 140 /* 141 * `tzc_dmc500_configure_region0` is used to program region 0 in both the 142 * system interfaces of all the DMC-500 instances. Region 0 covers the whole 143 * address space that is not mapped to any other region for a system interface, 144 * and is always enabled; this cannot be changed. This function only changes 145 * the access permissions. 146 */ 147 void tzc_dmc500_configure_region0(unsigned int sec_attr, 148 unsigned int nsaid_permissions) 149 { 150 int dmc_inst, sys_if; 151 152 /* Assert if DMC-500 is not initialized */ 153 assert(g_driver_data); 154 155 /* Configure region_0 in all DMC instances */ 156 for (dmc_inst = 0; dmc_inst < g_driver_data->dmc_count; dmc_inst++) { 157 assert(DMC_INST_BASE_ADDR(dmc_inst)); 158 for (sys_if = 0; sys_if < g_sys_if_count; sys_if++) 159 _tzc_dmc500_configure_region0( 160 DMC_INST_SI_BASE(dmc_inst, sys_if), 161 sec_attr, nsaid_permissions); 162 } 163 164 g_conf_regions[0].sec_attr = sec_attr; 165 g_conf_regions[0].is_enabled = 1; 166 } 167 168 /* 169 * `tzc_dmc500_configure_region` is used to program a region into all system 170 * interfaces of all the DMC instances. 171 * NOTE: 172 * Region 0 is special; it is preferable to use tzc_dmc500_configure_region0 173 * for this region (see comment for that function). 174 */ 175 void tzc_dmc500_configure_region(unsigned int region_no, 176 unsigned long long region_base, 177 unsigned long long region_top, 178 unsigned int sec_attr, 179 unsigned int nsaid_permissions) 180 { 181 int dmc_inst, sys_if; 182 183 assert(g_driver_data); 184 /* Do range checks on regions. */ 185 assert((region_no >= 0U) && (region_no <= MAX_REGION_VAL)); 186 187 /* 188 * Do address range check based on DMC-TZ configuration. A 43bit address 189 * is the max and expected case. 190 */ 191 assert(((region_top <= _tzc_get_max_top_addr(43)) && 192 (region_base < region_top))); 193 194 /* region_base and (region_top + 1) must be 4KB aligned */ 195 assert(((region_base | (region_top + 1U)) & (4096U - 1U)) == 0U); 196 197 for (dmc_inst = 0; dmc_inst < g_driver_data->dmc_count; dmc_inst++) { 198 assert(DMC_INST_BASE_ADDR(dmc_inst)); 199 for (sys_if = 0; sys_if < g_sys_if_count; sys_if++) 200 _tzc_dmc500_configure_region( 201 DMC_INST_SI_BASE(dmc_inst, sys_if), 202 TZC_DMC500_REGION_ATTR_F_EN_MASK, 203 region_no, region_base, region_top, 204 sec_attr, nsaid_permissions); 205 } 206 207 g_conf_regions[region_no].sec_attr = sec_attr; 208 g_conf_regions[region_no].is_enabled = 1; 209 } 210 211 /* Sets the action value for all the DMC instances */ 212 void tzc_dmc500_set_action(unsigned int action) 213 { 214 int dmc_inst; 215 216 assert(g_driver_data); 217 218 for (dmc_inst = 0; dmc_inst < g_driver_data->dmc_count; dmc_inst++) { 219 assert(DMC_INST_BASE_ADDR(dmc_inst)); 220 /* 221 * - Currently no handler is provided to trap an error via 222 * interrupt or exception. 223 * - The interrupt action has not been tested. 224 */ 225 _tzc_dmc500_write_action(DMC_INST_BASE_ADDR(dmc_inst), action); 226 } 227 } 228 229 /* 230 * A DMC-500 instance must be present at each base address provided by the 231 * platform. It also expects platform to pass at least one instance of 232 * DMC-500. 233 */ 234 static void validate_plat_driver_data( 235 const tzc_dmc500_driver_data_t *plat_driver_data) 236 { 237 #if ENABLE_ASSERTIONS 238 int i; 239 unsigned int dmc_id; 240 uintptr_t dmc_base; 241 242 assert(plat_driver_data); 243 assert(plat_driver_data->dmc_count > 0 && 244 (plat_driver_data->dmc_count <= MAX_DMC_COUNT)); 245 246 for (i = 0; i < plat_driver_data->dmc_count; i++) { 247 dmc_base = plat_driver_data->dmc_base[i]; 248 assert(dmc_base); 249 250 dmc_id = _tzc_read_peripheral_id(dmc_base); 251 assert(dmc_id == DMC500_PERIPHERAL_ID); 252 } 253 #endif /* ENABLE_ASSERTIONS */ 254 } 255 256 257 /* 258 * Initializes the base address and count of DMC instances. 259 * 260 * Note : Only pointer to plat_driver_data is saved, so it is caller's 261 * responsibility to keep it valid until the driver is used. 262 */ 263 void tzc_dmc500_driver_init(const tzc_dmc500_driver_data_t *plat_driver_data) 264 { 265 /* Check valid pointer is passed */ 266 assert(plat_driver_data); 267 268 /* 269 * NOTE: This driver expects the DMC-500 controller is already in 270 * READY state. Hence, it uses the reconfiguration method for 271 * programming TrustZone regions 272 */ 273 /* Validates the information passed by platform */ 274 validate_plat_driver_data(plat_driver_data); 275 g_driver_data = plat_driver_data; 276 277 /* Check valid system interface count */ 278 assert(g_driver_data->sys_if_count <= MAX_SYS_IF_COUNT); 279 280 g_sys_if_count = g_driver_data->sys_if_count; 281 282 /* If interface count is not present then assume max */ 283 if (g_sys_if_count == 0U) 284 g_sys_if_count = MAX_SYS_IF_COUNT; 285 } 286