1Build Options 2============= 3 4The TF-A build system supports the following build options. Unless mentioned 5otherwise, these options are expected to be specified at the build command 6line and are not to be modified in any component makefiles. Note that the 7build system doesn't track dependency for build options. Therefore, if any of 8the build options are changed from a previous build, a clean build must be 9performed. 10 11.. _build_options_common: 12 13Common build options 14-------------------- 15 16- ``AARCH32_INSTRUCTION_SET``: Choose the AArch32 instruction set that the 17 compiler should use. Valid values are T32 and A32. It defaults to T32 due to 18 code having a smaller resulting size. 19 20- ``AARCH32_SP`` : Choose the AArch32 Secure Payload component to be built as 21 as the BL32 image when ``ARCH=aarch32``. The value should be the path to the 22 directory containing the SP source, relative to the ``bl32/``; the directory 23 is expected to contain a makefile called ``<aarch32_sp-value>.mk``. 24 25- ``AMU_RESTRICT_COUNTERS``: Register reads to the group 1 counters will return 26 zero at all but the highest implemented exception level. External 27 memory-mapped debug accesses are unaffected by this control. 28 The default value is 1 for all platforms. 29 30- ``ARCH`` : Choose the target build architecture for TF-A. It can take either 31 ``aarch64`` or ``aarch32`` as values. By default, it is defined to 32 ``aarch64``. 33 34- ``ARM_ARCH_FEATURE``: Optional Arm Architecture build option which specifies 35 one or more feature modifiers. This option has the form ``[no]feature+...`` 36 and defaults to ``none``. It translates into compiler option 37 ``-march=armvX[.Y]-a+[no]feature+...``. See compiler's documentation for the 38 list of supported feature modifiers. 39 40- ``ARM_ARCH_MAJOR``: The major version of Arm Architecture to target when 41 compiling TF-A. Its value must be numeric, and defaults to 8 . See also, 42 *Armv8 Architecture Extensions* and *Armv7 Architecture Extensions* in 43 :ref:`Firmware Design`. 44 45- ``ARM_ARCH_MINOR``: The minor version of Arm Architecture to target when 46 compiling TF-A. Its value must be a numeric, and defaults to 0. See also, 47 *Armv8 Architecture Extensions* in :ref:`Firmware Design`. 48 49- ``ARM_BL2_SP_LIST_DTS``: Path to DTS file snippet to override the hardcoded 50 SP nodes in tb_fw_config. 51 52- ``ARM_SPMC_MANIFEST_DTS`` : path to an alternate manifest file used as the 53 SPMC Core manifest. Valid when ``SPD=spmd`` is selected. 54 55- ``BL2``: This is an optional build option which specifies the path to BL2 56 image for the ``fip`` target. In this case, the BL2 in the TF-A will not be 57 built. 58 59- ``BL2U``: This is an optional build option which specifies the path to 60 BL2U image. In this case, the BL2U in TF-A will not be built. 61 62- ``RESET_TO_BL2``: Boolean option to enable BL2 entrypoint as the CPU reset 63 vector instead of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 64 entrypoint) or 1 (CPU reset to BL2 entrypoint). 65 The default value is 0. 66 67- ``BL2_RUNS_AT_EL3``: This is an implicit flag to denote that BL2 runs at EL3. 68 While it is explicitly set to 1 when RESET_TO_BL2 is set to 1 it can also be 69 true in a 4-world system where RESET_TO_BL2 is 0. 70 71- ``BL2_ENABLE_SP_LOAD``: Boolean option to enable loading SP packages from the 72 FIP. Automatically enabled if ``SP_LAYOUT_FILE`` is provided. 73 74- ``BL2_IN_XIP_MEM``: In some use-cases BL2 will be stored in eXecute In Place 75 (XIP) memory, like BL1. In these use-cases, it is necessary to initialize 76 the RW sections in RAM, while leaving the RO sections in place. This option 77 enable this use-case. For now, this option is only supported 78 when RESET_TO_BL2 is set to '1'. 79 80- ``BL31``: This is an optional build option which specifies the path to 81 BL31 image for the ``fip`` target. In this case, the BL31 in TF-A will not 82 be built. 83 84- ``BL31_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 85 file that contains the BL31 private key in PEM format or a PKCS11 URI. If 86 ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 87 88- ``BL32``: This is an optional build option which specifies the path to 89 BL32 image for the ``fip`` target. In this case, the BL32 in TF-A will not 90 be built. 91 92- ``BL32_EXTRA1``: This is an optional build option which specifies the path to 93 Trusted OS Extra1 image for the ``fip`` target. 94 95- ``BL32_EXTRA2``: This is an optional build option which specifies the path to 96 Trusted OS Extra2 image for the ``fip`` target. 97 98- ``BL32_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 99 file that contains the BL32 private key in PEM format or a PKCS11 URI. If 100 ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 101 102- ``RMM``: This is an optional build option used when ``ENABLE_RME`` is set. 103 It specifies the path to RMM binary for the ``fip`` target. If the RMM option 104 is not specified, TF-A builds the TRP to load and run at R-EL2. 105 106- ``BL33``: Path to BL33 image in the host file system. This is mandatory for 107 ``fip`` target in case TF-A BL2 is used. 108 109- ``BL33_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 110 file that contains the BL33 private key in PEM format or a PKCS11 URI. If 111 ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 112 113- ``BRANCH_PROTECTION``: Numeric value to enable ARMv8.3 Pointer Authentication 114 and ARMv8.5 Branch Target Identification support for TF-A BL images themselves. 115 If enabled, it is needed to use a compiler that supports the option 116 ``-mbranch-protection``. The value of the ``-march`` (via ``ARM_ARCH_MINOR`` 117 and ``ARM_ARCH_MAJOR``) option will control which instructions will be 118 emitted (HINT space or not). Selects the branch protection features to use: 119- 0: Default value turns off all types of branch protection (FEAT_STATE_DISABLED) 120- 1: Enables all types of branch protection features 121- 2: Return address signing to its standard level 122- 3: Extend the signing to include leaf functions 123- 4: Turn on branch target identification mechanism 124- 5: Enables all types of branch protection features, only if present in 125 hardware (FEAT_STATE_CHECK). 126 127 The table below summarizes ``BRANCH_PROTECTION`` values, GCC compilation options 128 and resulting PAuth/BTI features. 129 130 +-------+--------------+-------+-----+ 131 | Value | GCC option | PAuth | BTI | 132 +=======+==============+=======+=====+ 133 | 0 | none | N | N | 134 +-------+--------------+-------+-----+ 135 | 1 | standard | Y | Y | 136 +-------+--------------+-------+-----+ 137 | 2 | pac-ret | Y | N | 138 +-------+--------------+-------+-----+ 139 | 3 | pac-ret+leaf | Y | N | 140 +-------+--------------+-------+-----+ 141 | 4 | bti | N | Y | 142 +-------+--------------+-------+-----+ 143 | 5 | dynamic | Y | Y | 144 +-------+--------------+-------+-----+ 145 146 This option defaults to 0. 147 Note that Pointer Authentication is enabled for Non-secure world 148 irrespective of the value of this option if the CPU supports it. 149 150- ``BUILD_MESSAGE_TIMESTAMP``: String used to identify the time and date of the 151 compilation of each build. It must be set to a C string (including quotes 152 where applicable). Defaults to a string that contains the time and date of 153 the compilation. 154 155- ``BUILD_STRING``: Input string for VERSION_STRING, which allows the TF-A 156 build to be uniquely identified. Defaults to the current git commit id. 157 158- ``BUILD_BASE``: Output directory for the build. Defaults to ``./build`` 159 160- ``CFLAGS``: Extra user options appended on the compiler's command line in 161 addition to the options set by the build system. 162 163- ``COLD_BOOT_SINGLE_CPU``: This option indicates whether the platform may 164 release several CPUs out of reset. It can take either 0 (several CPUs may be 165 brought up) or 1 (only one CPU will ever be brought up during cold reset). 166 Default is 0. If the platform always brings up a single CPU, there is no 167 need to distinguish between primary and secondary CPUs and the boot path can 168 be optimised. The ``plat_is_my_cpu_primary()`` and 169 ``plat_secondary_cold_boot_setup()`` platform porting interfaces do not need 170 to be implemented in this case. 171 172- ``COT``: When Trusted Boot is enabled, selects the desired chain of trust. 173 Defaults to ``tbbr``. 174 175- ``CRASH_REPORTING``: A non-zero value enables a console dump of processor 176 register state when an unexpected exception occurs during execution of 177 BL31. This option defaults to the value of ``DEBUG`` - i.e. by default 178 this is only enabled for a debug build of the firmware. 179 180- ``CREATE_KEYS``: This option is used when ``GENERATE_COT=1``. It tells the 181 certificate generation tool to create new keys in case no valid keys are 182 present or specified. Allowed options are '0' or '1'. Default is '1'. 183 184- ``CTX_INCLUDE_AARCH32_REGS`` : Boolean option that, when set to 1, will cause 185 the AArch32 system registers to be included when saving and restoring the 186 CPU context. The option must be set to 0 for AArch64-only platforms (that 187 is on hardware that does not implement AArch32, or at least not at EL1 and 188 higher ELs). Default value is 1. 189 190- ``CTX_INCLUDE_FPREGS``: Boolean option that, when set to 1, will cause the FP 191 registers to be included when saving and restoring the CPU context. Default 192 is 0. 193 194- ``CTX_INCLUDE_MPAM_REGS``: Boolean option that, when set to 1, will cause the 195 Memory System Resource Partitioning and Monitoring (MPAM) 196 registers to be included when saving and restoring the CPU context. 197 Default is '0'. 198 199- ``CTX_INCLUDE_NEVE_REGS``: Numeric value, when set will cause the Armv8.4-NV 200 registers to be saved/restored when entering/exiting an EL2 execution 201 context. This flag can take values 0 to 2, to align with the 202 ``ENABLE_FEAT`` mechanism. Default value is 0. 203 204- ``CTX_INCLUDE_PAUTH_REGS``: Numeric value to enable the Pointer 205 Authentication for Secure world. This will cause the ARMv8.3-PAuth registers 206 to be included when saving and restoring the CPU context as part of world 207 switch. Automatically enabled when ``BRANCH_PROTECTION`` is enabled. This flag 208 can take values 0 to 2, to align with ``ENABLE_FEAT`` mechanism. Default value 209 is 0. 210 211 Note that Pointer Authentication is enabled for Non-secure world irrespective 212 of the value of this flag if the CPU supports it. Alternatively, when 213 ``BRANCH_PROTECTION`` is enabled, this flag is superseded. 214 215- ``CTX_INCLUDE_SVE_REGS``: Boolean option that, when set to 1, will cause the 216 SVE registers to be included when saving and restoring the CPU context. Note 217 that this build option requires ``ENABLE_SVE_FOR_SWD`` to be enabled. In 218 general, it is recommended to perform SVE context management in lower ELs 219 and skip in EL3 due to the additional cost of maintaining large data 220 structures to track the SVE state. Hence, the default value is 0. 221 222- ``DEBUG``: Chooses between a debug and release build. It can take either 0 223 (release) or 1 (debug) as values. 0 is the default. 224 225- ``DECRYPTION_SUPPORT``: This build flag enables the user to select the 226 authenticated decryption algorithm to be used to decrypt firmware/s during 227 boot. It accepts 2 values: ``aes_gcm`` and ``none``. The default value of 228 this flag is ``none`` to disable firmware decryption which is an optional 229 feature as per TBBR. 230 231- ``DISABLE_BIN_GENERATION``: Boolean option to disable the generation 232 of the binary image. If set to 1, then only the ELF image is built. 233 0 is the default. 234 235- ``DISABLE_MTPMU``: Numeric option to disable ``FEAT_MTPMU`` (Multi Threaded 236 PMU). ``FEAT_MTPMU`` is an optional feature available on Armv8.6 onwards. 237 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 238 mechanism. Default is ``0``. 239 240- ``DYN_DISABLE_AUTH``: Provides the capability to dynamically disable Trusted 241 Board Boot authentication at runtime. This option is meant to be enabled only 242 for development platforms. ``TRUSTED_BOARD_BOOT`` flag must be set if this 243 flag has to be enabled. 0 is the default. 244 245- ``E``: Boolean option to make warnings into errors. Default is 1. 246 247 When specifying higher warnings levels (``W=1`` and higher), this option 248 defaults to 0. This is done to encourage contributors to use them, as they 249 are expected to produce warnings that would otherwise fail the build. New 250 contributions are still expected to build with ``W=0`` and ``E=1`` (the 251 default). 252 253- ``EARLY_CONSOLE``: This option is used to enable early traces before default 254 console is properly setup. It introduces EARLY_* traces macros, that will 255 use the non-EARLY traces macros if the flag is enabled, or do nothing 256 otherwise. To use this feature, platforms will have to create the function 257 plat_setup_early_console(). 258 Default is 0 (disabled) 259 260- ``EL3_PAYLOAD_BASE``: This option enables booting an EL3 payload instead of 261 the normal boot flow. It must specify the entry point address of the EL3 262 payload. Please refer to the "Booting an EL3 payload" section for more 263 details. 264 265- ``ENABLE_AMU_AUXILIARY_COUNTERS``: Enables support for AMU auxiliary counters 266 (also known as group 1 counters). These are implementation-defined counters, 267 and as such require additional platform configuration. Default is 0. 268 269- ``ENABLE_ASSERTIONS``: This option controls whether or not calls to ``assert()`` 270 are compiled out. For debug builds, this option defaults to 1, and calls to 271 ``assert()`` are left in place. For release builds, this option defaults to 0 272 and calls to ``assert()`` function are compiled out. This option can be set 273 independently of ``DEBUG``. It can also be used to hide any auxiliary code 274 that is only required for the assertion and does not fit in the assertion 275 itself. 276 277- ``ENABLE_BACKTRACE``: This option controls whether to enable backtrace 278 dumps or not. It is supported in both AArch64 and AArch32. However, in 279 AArch32 the format of the frame records are not defined in the AAPCS and they 280 are defined by the implementation. This implementation of backtrace only 281 supports the format used by GCC when T32 interworking is disabled. For this 282 reason enabling this option in AArch32 will force the compiler to only 283 generate A32 code. This option is enabled by default only in AArch64 debug 284 builds, but this behaviour can be overridden in each platform's Makefile or 285 in the build command line. 286 287- ``ENABLE_FEAT`` 288 The Arm architecture defines several architecture extension features, 289 named FEAT_xxx in the architecure manual. Some of those features require 290 setup code in higher exception levels, other features might be used by TF-A 291 code itself. 292 Most of the feature flags defined in the TF-A build system permit to take 293 the values 0, 1 or 2, with the following meaning: 294 295 :: 296 297 ENABLE_FEAT_* = 0: Feature is disabled statically at compile time. 298 ENABLE_FEAT_* = 1: Feature is enabled unconditionally at compile time. 299 ENABLE_FEAT_* = 2: Feature is enabled, but checked at runtime. 300 301 When setting the flag to 0, the feature is disabled during compilation, 302 and the compiler's optimisation stage and the linker will try to remove 303 as much of this code as possible. 304 If it is defined to 1, the code will use the feature unconditionally, so the 305 CPU is expected to support that feature. The FEATURE_DETECTION debug 306 feature, if enabled, will verify this. 307 If the feature flag is set to 2, support for the feature will be compiled 308 in, but its existence will be checked at runtime, so it works on CPUs with 309 or without the feature. This is mostly useful for platforms which either 310 support multiple different CPUs, or where the CPU is configured at runtime, 311 like in emulators. 312 313- ``ENABLE_FEAT_AMU``: Numeric value to enable Activity Monitor Unit 314 extensions. This flag can take the values 0 to 2, to align with the 315 ``ENABLE_FEAT`` mechanism. This is an optional architectural feature 316 available on v8.4 onwards. Some v8.2 implementations also implement an AMU 317 and this option can be used to enable this feature on those systems as well. 318 This flag can take the values 0 to 2, the default is 0. 319 320- ``ENABLE_FEAT_AMUv1p1``: Numeric value to enable the ``FEAT_AMUv1p1`` 321 extension. ``FEAT_AMUv1p1`` is an optional feature available on Arm v8.6 322 onwards. This flag can take the values 0 to 2, to align with the 323 ``ENABLE_FEAT`` mechanism. Default value is ``0``. 324 325- ``ENABLE_FEAT_CPA2``: Numeric value to enable the ``FEAT_CPA2`` extension. 326 It enables checked pointer arithmetic in EL3, which will result in address 327 faults in the event that a pointer arithmetic overflow error occurs. This is 328 an optional feature starting from Arm v9.4 and This flag can take values 0 to 329 2, to align with the ``ENABLE_FEAT`` mechanism. Default value is ``0``. 330 331- ``ENABLE_FEAT_CSV2_2``: Numeric value to enable the ``FEAT_CSV2_2`` 332 extension. It allows access to the SCXTNUM_EL2 (Software Context Number) 333 register during EL2 context save/restore operations. ``FEAT_CSV2_2`` is an 334 optional feature available on Arm v8.0 onwards. This flag can take values 335 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 336 Default value is ``0``. 337 338- ``ENABLE_FEAT_CSV2_3``: Numeric value to enable support for ``FEAT_CSV2_3`` 339 extension. This feature is supported in AArch64 state only and is an optional 340 feature available in Arm v8.0 implementations. 341 ``FEAT_CSV2_3`` implies the implementation of ``FEAT_CSV2_2``. 342 The flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 343 mechanism. Default value is ``0``. 344 345- ``ENABLE_FEAT_DEBUGV8P9``: Numeric value to enable ``FEAT_DEBUGV8P9`` 346 extension which allows the ability to implement more than 16 breakpoints 347 and/or watchpoints. This feature is mandatory from v8.9 and is optional 348 from v8.8. This flag can take the values of 0 to 2, to align with the 349 ``ENABLE_FEAT`` mechanism. Default value is ``0``. 350 351- ``ENABLE_FEAT_DIT``: Numeric value to enable ``FEAT_DIT`` (Data Independent 352 Timing) extension. It allows setting the ``DIT`` bit of PSTATE in EL3. 353 ``FEAT_DIT`` is a mandatory architectural feature and is enabled from v8.4 354 and upwards. This flag can take the values 0 to 2, to align with the 355 ``ENABLE_FEAT`` mechanism. Default value is ``0``. 356 357- ``ENABLE_FEAT_ECV``: Numeric value to enable support for the Enhanced Counter 358 Virtualization feature, allowing for access to the CNTPOFF_EL2 (Counter-timer 359 Physical Offset register) during EL2 to EL3 context save/restore operations. 360 Its a mandatory architectural feature and is enabled from v8.6 and upwards. 361 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 362 mechanism. Default value is ``0``. 363 364- ``ENABLE_FEAT_FPMR``: Numerical value to enable support for Floating Point 365 Mode Register feature, allowing access to the FPMR register. FPMR register 366 controls the behaviors of FP8 instructions. It is an optional architectural 367 feature from v9.2 and upwards. This flag can take value of 0 to 2, to align 368 with the ``FEATURE_DETECTION`` mechanism. Default value is ``0``. 369 370- ``ENABLE_FEAT_FGT``: Numeric value to enable support for FGT (Fine Grain Traps) 371 feature allowing for access to the HDFGRTR_EL2 (Hypervisor Debug Fine-Grained 372 Read Trap Register) during EL2 to EL3 context save/restore operations. 373 Its a mandatory architectural feature and is enabled from v8.6 and upwards. 374 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 375 mechanism. Default value is ``0``. 376 377- ``ENABLE_FEAT_FGT2``: Numeric value to enable support for FGT2 378 (Fine Grain Traps 2) feature allowing for access to Fine-grained trap 2 registers 379 during EL2 to EL3 context save/restore operations. 380 Its an optional architectural feature and is available from v8.8 and upwards. 381 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 382 mechanism. Default value is ``0``. 383 384- ``ENABLE_FEAT_FGWTE3``: Numeric value to enable support for 385 Fine Grained Write Trap EL3 (FEAT_FGWTE3), a feature that allows EL3 to 386 restrict overwriting certain EL3 registers after boot. 387 This lockdown is established by setting individual trap bits for 388 system registers that are not expected to be overwritten after boot. 389 This feature is an optional architectural feature and is available from 390 Armv9.4 onwards. This flag can take values from 0 to 2, aligning with 391 the ``ENABLE_FEAT`` mechanism. The default value is 0. 392 393 .. note:: 394 This feature currently traps access to all EL3 registers in 395 ``FGWTE3_EL3``, except for ``MDCR_EL3``, ``MPAM3_EL3``, 396 ``TPIDR_EL3``(when ``CRASH_REPORTING=1``), and 397 ``SCTLR_EL3``(when ``HW_ASSISTED_COHERENCY=0``). 398 If additional traps need to be disabled for specific platforms, 399 please contact the Arm team on `TF-A public mailing list`_. 400 401- ``ENABLE_FEAT_HCX``: Numeric value to set the bit SCR_EL3.HXEn in EL3 to 402 allow access to HCRX_EL2 (extended hypervisor control register) from EL2 as 403 well as adding HCRX_EL2 to the EL2 context save/restore operations. Its a 404 mandatory architectural feature and is enabled from v8.7 and upwards. This 405 flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 406 mechanism. Default value is ``0``. 407 408- ``ENABLE_FEAT_MOPS``: Numeric value to enable FEAT_MOPS (Standardization 409 of memory operations) when INIT_UNUSED_NS_EL2=1. 410 This feature is mandatory from v8.8 and enabling of FEAT_MOPS does not 411 require any settings from EL3 as the controls are present in EL2 registers 412 (HCRX_EL2.{MSCEn,MCE2} and SCTLR_EL2.MSCEn) and in most configurations 413 we expect EL2 to be present. But in case of INIT_UNUSED_NS_EL2=1 , 414 EL3 should configure the EL2 registers. This flag 415 can take values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 416 Default value is ``0``. 417 418- ``ENABLE_FEAT_MTE2``: Numeric value to enable Memory Tagging Extension2 419 if the platform wants to use this feature and MTE2 is enabled at ELX. 420 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 421 mechanism. Default value is ``0``. 422 423- ``ENABLE_FEAT_PAN``: Numeric value to enable the ``FEAT_PAN`` (Privileged 424 Access Never) extension. ``FEAT_PAN`` adds a bit to PSTATE, generating a 425 permission fault for any privileged data access from EL1/EL2 to virtual 426 memory address, accessible at EL0, provided (HCR_EL2.E2H=1). It is a 427 mandatory architectural feature and is enabled from v8.1 and upwards. This 428 flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 429 mechanism. Default value is ``0``. 430 431- ``ENABLE_FEAT_PAUTH_LR``: Numeric value to enable the ``FEAT_PAUTH_LR`` 432 extension. ``FEAT_PAUTH_LR`` is an optional feature available from Arm v9.4 433 onwards. This feature requires PAUTH to be enabled via the 434 ``BRANCH_PROTECTION`` flag. This flag can take the values 0 to 2, to align 435 with the ``ENABLE_FEAT`` mechanism. Default value is ``0``. 436 437- ``ENABLE_FEAT_RNG``: Numeric value to enable the ``FEAT_RNG`` extension. 438 ``FEAT_RNG`` is an optional feature available on Arm v8.5 onwards. This 439 flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 440 mechanism. Default value is ``0``. 441 442- ``ENABLE_FEAT_RNG_TRAP``: Numeric value to enable the ``FEAT_RNG_TRAP`` 443 extension. This feature is only supported in AArch64 state. This flag can 444 take values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 445 Default value is ``0``. ``FEAT_RNG_TRAP`` is an optional feature from 446 Armv8.5 onwards. 447 448- ``ENABLE_FEAT_SB``: Boolean option to let the TF-A code use the ``FEAT_SB`` 449 (Speculation Barrier) instruction ``FEAT_SB`` is an optional feature and 450 defaults to ``0`` for pre-Armv8.5 CPUs, but is mandatory for Armv8.5 or 451 later CPUs. It is enabled from v8.5 and upwards and if needed can be 452 overidden from platforms explicitly. 453 454- ``ENABLE_FEAT_SEL2``: Numeric value to enable the ``FEAT_SEL2`` (Secure EL2) 455 extension. ``FEAT_SEL2`` is a mandatory feature available on Arm v8.4. 456 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 457 mechanism. Default is ``0``. 458 459- ``ENABLE_FEAT_TWED``: Numeric value to enable the ``FEAT_TWED`` (Delayed 460 trapping of WFE Instruction) extension. ``FEAT_TWED`` is a optional feature 461 available on Arm v8.6. This flag can take values 0 to 2, to align with the 462 ``ENABLE_FEAT`` mechanism. Default is ``0``. 463 464 When ``ENABLE_FEAT_TWED`` is set to ``1``, WFE instruction trapping gets 465 delayed by the amount of value in ``TWED_DELAY``. 466 467- ``ENABLE_FEAT_VHE``: Numeric value to enable the ``FEAT_VHE`` (Virtualization 468 Host Extensions) extension. It allows access to CONTEXTIDR_EL2 register 469 during EL2 context save/restore operations.``FEAT_VHE`` is a mandatory 470 architectural feature and is enabled from v8.1 and upwards. It can take 471 values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 472 Default value is ``0``. 473 474- ``ENABLE_FEAT_TCR2``: Numeric value to set the bit SCR_EL3.ENTCR2 in EL3 to 475 allow access to TCR2_EL2 (extended translation control) from EL2 as 476 well as adding TCR2_EL2 to the EL2 context save/restore operations. Its a 477 mandatory architectural feature and is enabled from v8.9 and upwards. This 478 flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 479 mechanism. Default value is ``0``. 480 481- ``ENABLE_FEAT_S2PIE``: Numeric value to enable support for FEAT_S2PIE 482 at EL2 and below, and context switch relevant registers. This flag 483 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 484 mechanism. Default value is ``0``. 485 486- ``ENABLE_FEAT_S1PIE``: Numeric value to enable support for FEAT_S1PIE 487 at EL2 and below, and context switch relevant registers. This flag 488 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 489 mechanism. Default value is ``0``. 490 491- ``ENABLE_FEAT_S2POE``: Numeric value to enable support for FEAT_S2POE 492 at EL2 and below, and context switch relevant registers. This flag 493 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 494 mechanism. Default value is ``0``. 495 496- ``ENABLE_FEAT_S1POE``: Numeric value to enable support for FEAT_S1POE 497 at EL2 and below, and context switch relevant registers. This flag 498 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 499 mechanism. Default value is ``0``. 500 501- ``ENABLE_FEAT_GCS``: Numeric value to set the bit SCR_EL3.GCSEn in EL3 to 502 allow use of Guarded Control Stack from EL2 as well as adding the GCS 503 registers to the EL2 context save/restore operations. This flag can take 504 the values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 505 Default value is ``0``. 506 507 - ``ENABLE_FEAT_GCIE``: Boolean value to enable support for the GICv5 CPU 508 interface (see ``USE_GIC_DRIVER`` for the IRI). GICv5 and GICv3 are mutually 509 exclusive, so the ``ENABLE_FEAT`` mechanism is currently not supported. 510 Default value is ``0``. 511 512- ``ENABLE_FEAT_THE``: Numeric value to enable support for FEAT_THE 513 (Translation Hardening Extension) at EL2 and below, setting the bit 514 SCR_EL3.RCWMASKEn in EL3 to allow access to RCWMASK_EL1 and RCWSMASK_EL1 515 registers and context switch them. 516 Its an optional architectural feature and is available from v8.8 and upwards. 517 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 518 mechanism. Default value is ``0``. 519 520- ``ENABLE_FEAT_SCTLR2``: Numeric value to enable support for FEAT_SCTLR2 521 (Extension to SCTLR_ELx) at EL2 and below, setting the bit 522 SCR_EL3.SCTLR2En in EL3 to allow access to SCTLR2_ELx registers and 523 context switch them. This feature is OPTIONAL from Armv8.0 implementations 524 and mandatory in Armv8.9 implementations. 525 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 526 mechanism. Default value is ``0``. 527 528- ``ENABLE_FEAT_D128``: Numeric value to enable support for FEAT_D128 529 at EL2 and below, setting the bit SCT_EL3.D128En in EL3 to allow access to 530 128 bit version of system registers like PAR_EL1, TTBR0_EL1, TTBR1_EL1, 531 TTBR0_EL2, TTBR1_EL2, TTBR0_EL12, TTBR1_EL12 , VTTBR_EL2, RCWMASK_EL1, and 532 RCWSMASK_EL1. Its an optional architectural feature and is available from 533 9.3 and upwards. 534 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 535 mechanism. Default value is ``0``. 536 537- ``ENABLE_LTO``: Boolean option to enable Link Time Optimization (LTO) 538 support in GCC for TF-A. This option is currently only supported for 539 AArch64. Default is 0. 540 541- ``ENABLE_FEAT_MPAM``: Numeric value to enable lower ELs to use MPAM 542 feature. MPAM is an optional Armv8.4 extension that enables various memory 543 system components and resources to define partitions; software running at 544 various ELs can assign themselves to desired partition to control their 545 performance aspects. 546 547 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 548 mechanism. When this option is set to ``1`` or ``2``, EL3 allows lower ELs to 549 access their own MPAM registers without trapping into EL3. This option 550 doesn't make use of partitioning in EL3, however. Platform initialisation 551 code should configure and use partitions in EL3 as required. This option 552 defaults to ``2`` since MPAM is enabled by default for NS world only. 553 The flag is automatically disabled when the target 554 architecture is AArch32. 555 556- ``ENABLE_FEAT_MPAM_PE_BW_CTRL``: This option enables Armv9.3 MPAM 557 PE-side bandwidth controls and disables traps to EL3/EL2 (when 558 ``INIT_UNUSED_NS_EL2`` = 1). The flag accepts values from 0 to 2, in 559 line with the ``ENABLE_FEAT`` mechanism, and defaults to ``0``. 560 561- ``ENABLE_FEAT_LS64_ACCDATA``: Numeric value to enable access and save and 562 restore the ACCDATA_EL1 system register, at EL2 and below. This flag can 563 take the values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 564 Default value is ``0``. 565 566- ``ENABLE_MPMM``: Boolean option to enable support for the Maximum Power 567 Mitigation Mechanism supported by certain Arm cores, which allows the SoC 568 firmware to detect and limit high activity events to assist in SoC processor 569 power domain dynamic power budgeting and limit the triggering of whole-rail 570 (i.e. clock chopping) responses to overcurrent conditions. Defaults to ``0``. 571 572- ``ENABLE_PIE``: Boolean option to enable Position Independent Executable(PIE) 573 support within generic code in TF-A. This option is currently only supported 574 in BL2, BL31, and BL32 (TSP) for AARCH64 binaries, and 575 in BL32 (SP_min) for AARCH32. Default is 0. 576 577- ``ENABLE_PMF``: Boolean option to enable support for optional Performance 578 Measurement Framework(PMF). Default is 0. 579 580- ``ENABLE_PSCI_STAT``: Boolean option to enable support for optional PSCI 581 functions ``PSCI_STAT_RESIDENCY`` and ``PSCI_STAT_COUNT``. Default is 0. 582 In the absence of an alternate stat collection backend, ``ENABLE_PMF`` must 583 be enabled. If ``ENABLE_PMF`` is set, the residency statistics are tracked in 584 software. 585 586- ``ENABLE_RUNTIME_INSTRUMENTATION``: Boolean option to enable runtime 587 instrumentation which injects timestamp collection points into TF-A to 588 allow runtime performance to be measured. Currently, only PSCI is 589 instrumented. Enabling this option enables the ``ENABLE_PMF`` build option 590 as well. Default is 0. 591 592- ``ENABLE_SPE_FOR_NS`` : Numeric value to enable Statistical Profiling 593 extensions. This is an optional architectural feature for AArch64. 594 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 595 mechanism. The default is 2 but is automatically disabled when the target 596 architecture is AArch32. 597 598- ``ENABLE_SVE_FOR_NS``: Numeric value to enable Scalable Vector Extension 599 (SVE) for the Non-secure world only. SVE is an optional architectural feature 600 for AArch64. This flag can take the values 0 to 2, to align with the 601 ``ENABLE_FEAT`` mechanism. At this time, this build option cannot be used on 602 systems that have SPM_MM enabled. The default value is 2. 603 604 Note that when SVE is enabled for the Non-secure world, access 605 to SVE, SIMD and floating-point functionality from the Secure world is 606 independently controlled by build option ``ENABLE_SVE_FOR_SWD``. When enabling 607 ``CTX_INCLUDE_FPREGS`` and ``ENABLE_SVE_FOR_NS`` together, it is mandatory to 608 enable ``CTX_INCLUDE_SVE_REGS``. This is to avoid corruption of the Non-secure 609 world data in the Z-registers which are aliased by the SIMD and FP registers. 610 611- ``ENABLE_SVE_FOR_SWD``: Boolean option to enable SVE and FPU/SIMD functionality 612 for the Secure world. SVE is an optional architectural feature for AArch64. 613 The default is 0 and it is automatically disabled when the target architecture 614 is AArch32. 615 616 .. note:: 617 This build flag requires ``ENABLE_SVE_FOR_NS`` to be enabled. When enabling 618 ``ENABLE_SVE_FOR_SWD``, a developer must carefully consider whether 619 ``CTX_INCLUDE_SVE_REGS`` is also needed. 620 621- ``ENABLE_STACK_PROTECTOR``: String option to enable the stack protection 622 checks in GCC. Allowed values are "all", "strong", "default" and "none". The 623 default value is set to "none". "strong" is the recommended stack protection 624 level if this feature is desired. "none" disables the stack protection. For 625 all values other than "none", the ``plat_get_stack_protector_canary()`` 626 platform hook needs to be implemented. The value is passed as the last 627 component of the option ``-fstack-protector-$ENABLE_STACK_PROTECTOR``. 628 629- ``ENABLE_ERRATA_ALL``: This option is used only for testing purposes, Boolean 630 option to enable the workarounds for all errata that TF-A implements. Normally 631 they should be explicitly enabled depending on each platform's needs. Not 632 recommended for release builds. This option is default set to 0. 633 634- ``ENCRYPT_BL31``: Binary flag to enable encryption of BL31 firmware. This 635 flag depends on ``DECRYPTION_SUPPORT`` build flag. 636 637- ``ENCRYPT_BL32``: Binary flag to enable encryption of Secure BL32 payload. 638 This flag depends on ``DECRYPTION_SUPPORT`` build flag. 639 640- ``ENC_KEY``: A 32-byte (256-bit) symmetric key in hex string format. It could 641 either be SSK or BSSK depending on ``FW_ENC_STATUS`` flag. This value depends 642 on ``DECRYPTION_SUPPORT`` build flag. 643 644- ``ENC_NONCE``: A 12-byte (96-bit) encryption nonce or Initialization Vector 645 (IV) in hex string format. This value depends on ``DECRYPTION_SUPPORT`` 646 build flag. 647 648- ``ERROR_DEPRECATED``: This option decides whether to treat the usage of 649 deprecated platform APIs, helper functions or drivers within Trusted 650 Firmware as error. It can take the value 1 (flag the use of deprecated 651 APIs as error) or 0. The default is 0. 652 653- ``ETHOSN_NPU_DRIVER``: boolean option to enable a SiP service that can 654 configure an Arm® Ethos™-N NPU. To use this service the target platform's 655 ``HW_CONFIG`` must include the device tree nodes for the NPU. Currently, only 656 the Arm Juno platform has this included in its ``HW_CONFIG`` and the platform 657 only loads the ``HW_CONFIG`` in AArch64 builds. Default is 0. 658 659- ``ETHOSN_NPU_TZMP1``: boolean option to enable TZMP1 support for the 660 Arm® Ethos™-N NPU. Requires ``ETHOSN_NPU_DRIVER`` and 661 ``TRUSTED_BOARD_BOOT`` to be enabled. 662 663- ``ETHOSN_NPU_FW``: location of the NPU firmware binary 664 (```ethosn.bin```). This firmware image will be included in the FIP and 665 loaded at runtime. 666 667- ``EL3_EXCEPTION_HANDLING``: When set to ``1``, enable handling of exceptions 668 targeted at EL3. When set ``0`` (default), no exceptions are expected or 669 handled at EL3, and a panic will result. The exception to this rule is when 670 ``SPMD_SPM_AT_SEL2`` is set to ``1``, in which case, only exceptions 671 occuring during normal world execution, are trapped to EL3. Any exception 672 trapped during secure world execution are trapped to the SPMC. This is 673 supported only for AArch64 builds. 674 675- ``EVENT_LOG_LEVEL``: Chooses the log level to use for Measured Boot when 676 ``MEASURED_BOOT`` is enabled. For a list of valid values, see ``LOG_LEVEL``. 677 Default value is 40 (LOG_LEVEL_INFO). 678 679- ``FAULT_INJECTION_SUPPORT``: ARMv8.4 extensions introduced support for fault 680 injection from lower ELs, and this build option enables lower ELs to use 681 Error Records accessed via System Registers to inject faults. This is 682 applicable only to AArch64 builds. 683 684 This feature is intended for testing purposes only, and is advisable to keep 685 disabled for production images. 686 687- ``FIP_NAME``: This is an optional build option which specifies the FIP 688 filename for the ``fip`` target. Default is ``fip.bin``. 689 690- ``FWU_FIP_NAME``: This is an optional build option which specifies the FWU 691 FIP filename for the ``fwu_fip`` target. Default is ``fwu_fip.bin``. 692 693- ``FW_ENC_STATUS``: Top level firmware's encryption numeric flag, values: 694 695 :: 696 697 0: Encryption is done with Secret Symmetric Key (SSK) which is common 698 for a class of devices. 699 1: Encryption is done with Binding Secret Symmetric Key (BSSK) which is 700 unique per device. 701 702 This flag depends on ``DECRYPTION_SUPPORT`` build flag. 703 704- ``GENERATE_COT``: Boolean flag used to build and execute the ``cert_create`` 705 tool to create certificates as per the Chain of Trust described in 706 :ref:`Trusted Board Boot`. The build system then calls ``fiptool`` to 707 include the certificates in the FIP and FWU_FIP. Default value is '0'. 708 709 Specify both ``TRUSTED_BOARD_BOOT=1`` and ``GENERATE_COT=1`` to include support 710 for the Trusted Board Boot feature in the BL1 and BL2 images, to generate 711 the corresponding certificates, and to include those certificates in the 712 FIP and FWU_FIP. 713 714 Note that if ``TRUSTED_BOARD_BOOT=0`` and ``GENERATE_COT=1``, the BL1 and BL2 715 images will not include support for Trusted Board Boot. The FIP will still 716 include the corresponding certificates. This FIP can be used to verify the 717 Chain of Trust on the host machine through other mechanisms. 718 719 Note that if ``TRUSTED_BOARD_BOOT=1`` and ``GENERATE_COT=0``, the BL1 and BL2 720 images will include support for Trusted Board Boot, but the FIP and FWU_FIP 721 will not include the corresponding certificates, causing a boot failure. 722 723- ``GICV2_G0_FOR_EL3``: Unlike GICv3, the GICv2 architecture doesn't have 724 inherent support for specific EL3 type interrupts. Setting this build option 725 to ``1`` assumes GICv2 *Group 0* interrupts are expected to target EL3, both 726 by :ref:`platform abstraction layer<platform Interrupt Controller API>` and 727 :ref:`Interrupt Management Framework<Interrupt Management Framework>`. 728 This allows GICv2 platforms to enable features requiring EL3 interrupt type. 729 This also means that all GICv2 Group 0 interrupts are delivered to EL3, and 730 the Secure Payload interrupts needs to be synchronously handed over to Secure 731 EL1 for handling. The default value of this option is ``0``, which means the 732 Group 0 interrupts are assumed to be handled by Secure EL1. 733 734- ``HANDLE_EA_EL3_FIRST_NS``: When set to ``1``, External Aborts and SError 735 Interrupts, resulting from errors in NS world, will be always trapped in 736 EL3 i.e. in BL31 at runtime. When set to ``0`` (default), these exceptions 737 will be trapped in the current exception level (or in EL1 if the current 738 exception level is EL0). 739 740- ``HW_ASSISTED_COHERENCY``: On most Arm systems to-date, platform-specific 741 software operations are required for CPUs to enter and exit coherency. 742 However, newer systems exist where CPUs' entry to and exit from coherency 743 is managed in hardware. Such systems require software to only initiate these 744 operations, and the rest is managed in hardware, minimizing active software 745 management. In such systems, this boolean option enables TF-A to carry out 746 build and run-time optimizations during boot and power management operations. 747 This option defaults to 0 and if it is enabled, then it implies 748 ``WARMBOOT_ENABLE_DCACHE_EARLY`` is also enabled. 749 750 If this flag is disabled while the platform which TF-A is compiled for 751 includes cores that manage coherency in hardware, then a compilation error is 752 generated. This is based on the fact that a system cannot have, at the same 753 time, cores that manage coherency in hardware and cores that don't. In other 754 words, a platform cannot have, at the same time, cores that require 755 ``HW_ASSISTED_COHERENCY=1`` and cores that require 756 ``HW_ASSISTED_COHERENCY=0``. 757 758 Note that, when ``HW_ASSISTED_COHERENCY`` is enabled, version 2 of 759 translation library (xlat tables v2) must be used; version 1 of translation 760 library is not supported. 761 762- ``IMPDEF_SYSREG_TRAP``: Numeric value to enable the handling traps for 763 implementation defined system register accesses from lower ELs. Default 764 value is ``0``. 765 766- ``INVERTED_MEMMAP``: memmap tool print by default lower addresses at the 767 bottom, higher addresses at the top. This build flag can be set to '1' to 768 invert this behavior. Lower addresses will be printed at the top and higher 769 addresses at the bottom. 770 771- ``INIT_UNUSED_NS_EL2``: This build flag guards code that disables EL2 772 safely in scenario where NS-EL2 is present but unused. This flag is set to 0 773 by default. Platforms without NS-EL2 in use must enable this flag. 774 775- ``KEY_ALG``: This build flag enables the user to select the algorithm to be 776 used for generating the PKCS keys and subsequent signing of the certificate. 777 It accepts 5 values: ``rsa``, ``rsa_1_5``, ``ecdsa``, ``ecdsa-brainpool-regular`` 778 and ``ecdsa-brainpool-twisted``. The option ``rsa_1_5`` is the legacy PKCS#1 779 RSA 1.5 algorithm which is not TBBR compliant and is retained only for 780 compatibility. The default value of this flag is ``rsa`` which is the TBBR 781 compliant PKCS#1 RSA 2.1 scheme. 782 783- ``KEY_SIZE``: This build flag enables the user to select the key size for 784 the algorithm specified by ``KEY_ALG``. The valid values for ``KEY_SIZE`` 785 depend on the chosen algorithm and the cryptographic module. 786 787 +---------------------------+------------------------------------+ 788 | KEY_ALG | Possible key sizes | 789 +===========================+====================================+ 790 | rsa | 1024 , 2048 (default), 3072, 4096 | 791 +---------------------------+------------------------------------+ 792 | ecdsa | 256 (default), 384 | 793 +---------------------------+------------------------------------+ 794 | ecdsa-brainpool-regular | 256 (default) | 795 +---------------------------+------------------------------------+ 796 | ecdsa-brainpool-twisted | 256 (default) | 797 +---------------------------+------------------------------------+ 798 799- ``HASH_ALG``: This build flag enables the user to select the secure hash 800 algorithm. It accepts 3 values: ``sha256``, ``sha384`` and ``sha512``. 801 The default value of this flag is ``sha256``. 802 803- ``HW_CONFIG_BASE``: This option specifies the location in memory where the DTB 804 should either be loaded by BL2 or can be found by later stages. 805 806- ``LDFLAGS``: Extra user options appended to the linkers' command line in 807 addition to the one set by the build system. 808 809- ``LOG_LEVEL``: Chooses the log level, which controls the amount of console log 810 output compiled into the build. This should be one of the following: 811 812 :: 813 814 0 (LOG_LEVEL_NONE) 815 10 (LOG_LEVEL_ERROR) 816 20 (LOG_LEVEL_NOTICE) 817 30 (LOG_LEVEL_WARNING) 818 40 (LOG_LEVEL_INFO) 819 50 (LOG_LEVEL_VERBOSE) 820 821 All log output up to and including the selected log level is compiled into 822 the build. The default value is 40 in debug builds and 20 in release builds. 823 824- ``MEASURED_BOOT``: Boolean flag to include support for the Measured Boot 825 feature. This flag can be enabled with ``TRUSTED_BOARD_BOOT`` in order to 826 provide trust that the code taking the measurements and recording them has 827 not been tampered with. 828 829 This option defaults to 0. 830 831- ``DISCRETE_TPM``: Boolean flag to include support for a Discrete TPM. 832 833 This option defaults to 0. 834 835- ``TPM_INTERFACE``: When ``DISCRETE_TPM=1``, this is a required flag to 836 select the TPM interface. Currently only one interface is supported: 837 838 :: 839 840 FIFO_SPI 841 842- ``MBOOT_TPM_HASH_ALG``: Build flag to select the TPM hash algorithm used during 843 Measured Boot. Currently only accepts ``sha256`` as a valid algorithm. 844 845- ``MARCH_DIRECTIVE``: used to pass a -march option from the platform build 846 options to the compiler. An example usage: 847 848 .. code:: make 849 850 MARCH_DIRECTIVE := -march=armv8.5-a 851 852- ``HARDEN_SLS``: used to pass -mharden-sls=all from the TF-A build 853 options to the compiler currently supporting only of the options. 854 GCC documentation: 855 https://gcc.gnu.org/onlinedocs/gcc/AArch64-Options.html#index-mharden-sls 856 857 An example usage: 858 859 .. code:: make 860 861 HARDEN_SLS := 1 862 863 This option defaults to 0. 864 865- ``NON_TRUSTED_WORLD_KEY``: This option is used when ``GENERATE_COT=1``. It 866 specifies a file that contains the Non-Trusted World private key in PEM 867 format or a PKCS11 URI. If ``SAVE_KEYS=1``, only a file is accepted and it 868 will be used to save the key. 869 870- ``NS_BL2U``: Path to NS_BL2U image in the host file system. This image is 871 optional. It is only needed if the platform makefile specifies that it 872 is required in order to build the ``fwu_fip`` target. 873 874- ``NS_TIMER_SWITCH``: Enable save and restore for non-secure timer register 875 contents upon world switch. It can take either 0 (don't save and restore) or 876 1 (do save and restore). 0 is the default. An SPD may set this to 1 if it 877 wants the timer registers to be saved and restored. 878 879- ``OVERRIDE_LIBC``: This option allows platforms to override the default libc 880 for the BL image. It can be either 0 (include) or 1 (remove). The default 881 value is 0. 882 883- ``PL011_GENERIC_UART``: Boolean option to indicate the PL011 driver that 884 the underlying hardware is not a full PL011 UART but a minimally compliant 885 generic UART, which is a subset of the PL011. The driver will not access 886 any register that is not part of the SBSA generic UART specification. 887 Default value is 0 (a full PL011 compliant UART is present). 888 889- ``PLAT``: Choose a platform to build TF-A for. The chosen platform name 890 must be subdirectory of any depth under ``plat/``, and must contain a 891 platform makefile named ``platform.mk``. For example, to build TF-A for the 892 Arm Juno board, select PLAT=juno. 893 894- ``PLATFORM_REPORT_CTX_MEM_USE``: Reports the context memory allocated for 895 each core as well as the global context. The data includes the memory used 896 by each world and each privileged exception level. This build option is 897 applicable only for ``ARCH=aarch64`` builds. The default value is 0. 898 899- ``PRELOADED_BL33_BASE``: This option enables booting a preloaded BL33 image 900 instead of the normal boot flow. When defined, it must specify the entry 901 point address for the preloaded BL33 image. This option is incompatible with 902 ``EL3_PAYLOAD_BASE``. If both are defined, ``EL3_PAYLOAD_BASE`` has priority 903 over ``PRELOADED_BL33_BASE``. 904 905- ``PRESERVE_DSU_PMU_REGS``: This options when enabled allows the platform to 906 save/restore the DynamIQ Shared Unit's(DSU) Performance Monitoring Unit(PMU) 907 registers when the cluster goes through a power cycle. This is disabled by 908 default and platforms that require this feature have to enable them. 909 910- ``PROGRAMMABLE_RESET_ADDRESS``: This option indicates whether the reset 911 vector address can be programmed or is fixed on the platform. It can take 912 either 0 (fixed) or 1 (programmable). Default is 0. If the platform has a 913 programmable reset address, it is expected that a CPU will start executing 914 code directly at the right address, both on a cold and warm reset. In this 915 case, there is no need to identify the entrypoint on boot and the boot path 916 can be optimised. The ``plat_get_my_entrypoint()`` platform porting interface 917 does not need to be implemented in this case. 918 919- ``PSCI_EXTENDED_STATE_ID``: As per PSCI1.0 Specification, there are 2 formats 920 possible for the PSCI power-state parameter: original and extended State-ID 921 formats. This flag if set to 1, configures the generic PSCI layer to use the 922 extended format. The default value of this flag is 0, which means by default 923 the original power-state format is used by the PSCI implementation. This flag 924 should be specified by the platform makefile and it governs the return value 925 of PSCI_FEATURES API for CPU_SUSPEND smc function id. When this option is 926 enabled on Arm platforms, the option ``ARM_RECOM_STATE_ID_ENC`` needs to be 927 set to 1 as well. 928 929- ``PSCI_OS_INIT_MODE``: Boolean flag to enable support for optional PSCI 930 OS-initiated mode. This option defaults to 0. 931 932- ``ARCH_FEATURE_AVAILABILITY``: Boolean flag to enable support for the 933 optional SMCCC_ARCH_FEATURE_AVAILABILITY call. This option implicitly 934 interacts with IMPDEF_SYSREG_TRAP and software emulation. This option 935 defaults to 0. 936 937- ``ENABLE_FEAT_RAS``: Boolean flag to enable Armv8.2 RAS features. RAS features 938 are an optional extension for pre-Armv8.2 CPUs, but are mandatory for Armv8.2 939 or later CPUs. This flag can take the values 0 or 1. The default value is 0. 940 NOTE: This flag enables use of IESB capability to reduce entry latency into 941 EL3 even when RAS error handling is not performed on the platform. Hence this 942 flag is recommended to be turned on Armv8.2 and later CPUs. 943 944- ``RESET_TO_BL31``: Enable BL31 entrypoint as the CPU reset vector instead 945 of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 946 entrypoint) or 1 (CPU reset to BL31 entrypoint). 947 The default value is 0. 948 949- ``RESET_TO_SP_MIN``: SP_MIN is the minimal AArch32 Secure Payload provided 950 in TF-A. This flag configures SP_MIN entrypoint as the CPU reset vector 951 instead of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 952 entrypoint) or 1 (CPU reset to SP_MIN entrypoint). The default value is 0. 953 954- ``RME_GPT_BITLOCK_BLOCK``: This defines the block size (in number of 512MB 955- blocks) covered by a single bit of the bitlock structure during RME GPT 956- operations. The lower the block size, the better opportunity for 957- parallelising GPT operations but at the cost of more bits being needed 958- for the bitlock structure. This numeric parameter can take the values 959- from 0 to 512 and must be a power of 2. The value of 0 is special and 960- and it chooses a single spinlock for all GPT L1 table entries. Default 961- value is 1 which corresponds to block size of 512MB per bit of bitlock 962- structure. 963 964- ``RME_GPT_MAX_BLOCK``: Numeric value in MB to define the maximum size of 965 supported contiguous blocks in GPT Library. This parameter can take the 966 values 0, 2, 32 and 512. Setting this value to 0 disables use of Contigious 967 descriptors. Default value is 512. 968 969- ``ROT_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 970 file that contains the ROT private key in PEM format or a PKCS11 URI and 971 enforces public key hash generation. If ``SAVE_KEYS=1``, only a file is 972 accepted and it will be used to save the key. 973 974- ``SAVE_KEYS``: This option is used when ``GENERATE_COT=1``. It tells the 975 certificate generation tool to save the keys used to establish the Chain of 976 Trust. Allowed options are '0' or '1'. Default is '0' (do not save). 977 978- ``SCP_BL2``: Path to SCP_BL2 image in the host file system. This image is optional. 979 If a SCP_BL2 image is present then this option must be passed for the ``fip`` 980 target. 981 982- ``SCP_BL2_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 983 file that contains the SCP_BL2 private key in PEM format or a PKCS11 URI. 984 If ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 985 986- ``SCP_BL2U``: Path to SCP_BL2U image in the host file system. This image is 987 optional. It is only needed if the platform makefile specifies that it 988 is required in order to build the ``fwu_fip`` target. 989 990- ``SDEI_SUPPORT``: Setting this to ``1`` enables support for Software 991 Delegated Exception Interface to BL31 image. This defaults to ``0``. 992 993 When set to ``1``, the build option ``EL3_EXCEPTION_HANDLING`` must also be 994 set to ``1``. 995 996- ``SEPARATE_CODE_AND_RODATA``: Whether code and read-only data should be 997 isolated on separate memory pages. This is a trade-off between security and 998 memory usage. See "Isolating code and read-only data on separate memory 999 pages" section in :ref:`Firmware Design`. This flag is disabled by default 1000 and affects all BL images. 1001 1002- ``SEPARATE_NOBITS_REGION``: Setting this option to ``1`` allows the NOBITS 1003 sections of BL31 (.bss, stacks, page tables, and coherent memory) to be 1004 allocated in RAM discontiguous from the loaded firmware image. When set, the 1005 platform is expected to provide definitions for ``BL31_NOBITS_BASE`` and 1006 ``BL31_NOBITS_LIMIT``. When the option is ``0`` (the default), NOBITS 1007 sections are placed in RAM immediately following the loaded firmware image. 1008 1009- ``SEPARATE_BL2_NOLOAD_REGION``: Setting this option to ``1`` allows the 1010 NOLOAD sections of BL2 (.bss, stacks, page tables) to be allocated in RAM 1011 discontiguous from loaded firmware images. When set, the platform need to 1012 provide definitions of ``BL2_NOLOAD_START`` and ``BL2_NOLOAD_LIMIT``. This 1013 flag is disabled by default and NOLOAD sections are placed in RAM immediately 1014 following the loaded firmware image. 1015 1016- ``SEPARATE_BL2_FIP``: This option enables the separation of the BL2 FIP image 1017 from the main FIP image. When this option is enabled, the BL2 FIP image is built 1018 as a separate FIP image. The default value is 0. 1019 1020- ``SEPARATE_SIMD_SECTION``: Setting this option to ``1`` allows the SIMD context 1021 data structures to be put in a dedicated memory region as decided by platform 1022 integrator. Default value is ``0`` which means the SIMD context is put in BSS 1023 section of EL3 firmware. 1024 1025- ``SMC_PCI_SUPPORT``: This option allows platforms to handle PCI configuration 1026 access requests via a standard SMCCC defined in `DEN0115`_. When combined with 1027 UEFI+ACPI this can provide a certain amount of OS forward compatibility 1028 with newer platforms that aren't ECAM compliant. 1029 1030- ``SPD``: Choose a Secure Payload Dispatcher component to be built into TF-A. 1031 This build option is only valid if ``ARCH=aarch64``. The value should be 1032 the path to the directory containing the SPD source, relative to 1033 ``services/spd/``; the directory is expected to contain a makefile called 1034 ``<spd-value>.mk``. The SPM Dispatcher standard service is located in 1035 services/std_svc/spmd and enabled by ``SPD=spmd``. The SPM Dispatcher 1036 cannot be enabled when the ``SPM_MM`` option is enabled. 1037 1038- ``SPIN_ON_BL1_EXIT``: This option introduces an infinite loop in BL1. It can 1039 take either 0 (no loop) or 1 (add a loop). 0 is the default. This loop stops 1040 execution in BL1 just before handing over to BL31. At this point, all 1041 firmware images have been loaded in memory, and the MMU and caches are 1042 turned off. Refer to the "Debugging options" section for more details. 1043 1044- ``SPMC_AT_EL3`` : This boolean option is used jointly with the SPM 1045 Dispatcher option (``SPD=spmd``). When enabled (1) it indicates the SPMC 1046 component runs at the EL3 exception level. The default value is ``0`` ( 1047 disabled). This configuration supports pre-Armv8.4 platforms (aka not 1048 implementing the ``FEAT_SEL2`` extension). 1049 1050- ``SPMC_AT_EL3_SEL0_SP`` : Boolean option to enable SEL0 SP load support when 1051 ``SPMC_AT_EL3`` is enabled. The default value if ``0`` (disabled). This 1052 option cannot be enabled (``1``) when (``SPMC_AT_EL3``) is disabled. 1053 1054- ``SPMC_OPTEE`` : This boolean option is used jointly with the SPM 1055 Dispatcher option (``SPD=spmd``) and with ``SPMD_SPM_AT_SEL2=0`` to 1056 indicate that the SPMC at S-EL1 is OP-TEE and an OP-TEE specific loading 1057 mechanism should be used. 1058 1059- ``SPMD_SPM_AT_SEL2`` : This boolean option is used jointly with the SPM 1060 Dispatcher option (``SPD=spmd``). When enabled (1) it indicates the SPMC 1061 component runs at the S-EL2 exception level provided by the ``FEAT_SEL2`` 1062 extension. This is the default when enabling the SPM Dispatcher. When 1063 disabled (0) it indicates the SPMC component runs at the S-EL1 execution 1064 state or at EL3 if ``SPMC_AT_EL3`` is enabled. The latter configurations 1065 support pre-Armv8.4 platforms (aka not implementing the ``FEAT_SEL2`` 1066 extension). 1067 1068- ``SPM_MM`` : Boolean option to enable the Management Mode (MM)-based Secure 1069 Partition Manager (SPM) implementation. The default value is ``0`` 1070 (disabled). This option cannot be enabled (``1``) when SPM Dispatcher is 1071 enabled (``SPD=spmd``). 1072 1073- ``SP_LAYOUT_FILE``: Platform provided path to JSON file containing the 1074 description of secure partitions. The build system will parse this file and 1075 package all secure partition blobs into the FIP. This file is not 1076 necessarily part of TF-A tree. Only available when ``SPD=spmd``. 1077 1078- ``SP_MIN_WITH_SECURE_FIQ``: Boolean flag to indicate the SP_MIN handles 1079 secure interrupts (caught through the FIQ line). Platforms can enable 1080 this directive if they need to handle such interruption. When enabled, 1081 the FIQ are handled in monitor mode and non secure world is not allowed 1082 to mask these events. Platforms that enable FIQ handling in SP_MIN shall 1083 implement the api ``sp_min_plat_fiq_handler()``. The default value is 0. 1084 1085- ``SVE_VECTOR_LEN``: SVE vector length to configure in ZCR_EL3. 1086 Platforms can configure this if they need to lower the hardware 1087 limit, for example due to asymmetric configuration or limitations of 1088 software run at lower ELs. The default is the architectural maximum 1089 of 2048 which should be suitable for most configurations, the 1090 hardware will limit the effective VL to the maximum physically supported 1091 VL. 1092 1093- ``TRNG_SUPPORT``: Setting this to ``1`` enables support for True 1094 Random Number Generator Interface to BL31 image. This defaults to ``0``. 1095 1096- ``TRUSTED_BOARD_BOOT``: Boolean flag to include support for the Trusted Board 1097 Boot feature. When set to '1', BL1 and BL2 images include support to load 1098 and verify the certificates and images in a FIP, and BL1 includes support 1099 for the Firmware Update. The default value is '0'. Generation and inclusion 1100 of certificates in the FIP and FWU_FIP depends upon the value of the 1101 ``GENERATE_COT`` option. 1102 1103 .. warning:: 1104 This option depends on ``CREATE_KEYS`` to be enabled. If the keys 1105 already exist in disk, they will be overwritten without further notice. 1106 1107- ``TRUSTED_WORLD_KEY``: This option is used when ``GENERATE_COT=1``. It 1108 specifies a file that contains the Trusted World private key in PEM 1109 format or a PKCS11 URI. If ``SAVE_KEYS=1``, only a file is accepted and 1110 it will be used to save the key. 1111 1112- ``TSP_INIT_ASYNC``: Choose BL32 initialization method as asynchronous or 1113 synchronous, (see "Initializing a BL32 Image" section in 1114 :ref:`Firmware Design`). It can take the value 0 (BL32 is initialized using 1115 synchronous method) or 1 (BL32 is initialized using asynchronous method). 1116 Default is 0. 1117 1118- ``TSP_NS_INTR_ASYNC_PREEMPT``: A non zero value enables the interrupt 1119 routing model which routes non-secure interrupts asynchronously from TSP 1120 to EL3 causing immediate preemption of TSP. The EL3 is responsible 1121 for saving and restoring the TSP context in this routing model. The 1122 default routing model (when the value is 0) is to route non-secure 1123 interrupts to TSP allowing it to save its context and hand over 1124 synchronously to EL3 via an SMC. 1125 1126 .. note:: 1127 When ``EL3_EXCEPTION_HANDLING`` is ``1``, ``TSP_NS_INTR_ASYNC_PREEMPT`` 1128 must also be set to ``1``. 1129 1130- ``TS_SP_FW_CONFIG``: DTC build flag to include Trusted Services (Crypto and 1131 internal-trusted-storage) as SP in tb_fw_config device tree. 1132 1133- ``TWED_DELAY``: Numeric value to be set in order to delay the trapping of 1134 WFE instruction. ``ENABLE_FEAT_TWED`` build option must be enabled to set 1135 this delay. It can take values in the range (0-15). Default value is ``0`` 1136 and based on this value, 2^(TWED_DELAY + 8) cycles will be delayed. 1137 Platforms need to explicitly update this value based on their requirements. 1138 1139- ``USE_ARM_LINK``: This flag determines whether to enable support for ARM 1140 linker. When the ``LINKER`` build variable points to the armlink linker, 1141 this flag is enabled automatically. To enable support for armlink, platforms 1142 will have to provide a scatter file for the BL image. Currently, Tegra 1143 platforms use the armlink support to compile BL3-1 images. 1144 1145- ``USE_COHERENT_MEM``: This flag determines whether to include the coherent 1146 memory region in the BL memory map or not (see "Use of Coherent memory in 1147 TF-A" section in :ref:`Firmware Design`). It can take the value 1 1148 (Coherent memory region is included) or 0 (Coherent memory region is 1149 excluded). Default is 1. 1150 1151- ``USE_KERNEL_DT_CONVENTION``: When this option is enabled, the hardware 1152 device tree is passed to BL33 using register x0, aligning with the expectations 1153 of the Linux kernel on Arm platforms. If this option is disabled, a different 1154 register, typically x1, may be used instead. This build option is 1155 not necessary when firmware handoff is active (that is, when TRANSFER_LIST=1 1156 is set), and it will be removed once all platforms have transitioned to that 1157 convention. 1158 1159- ``USE_DSU_DRIVER``: This flag enables DSU (DynamIQ Shared Unit) driver. 1160 The DSU driver allows save/restore of DSU PMU registers through 1161 ``PRESERVE_DSU_PMU_REGS`` build option, provides access to PMU registers at 1162 EL1 and allows platforms to configure powerdown and power settings of DSU. 1163 1164- ``ARM_IO_IN_DTB``: This flag determines whether to use IO based on the 1165 firmware configuration framework. This will move the io_policies into a 1166 configuration device tree, instead of static structure in the code base. 1167 1168- ``COT_DESC_IN_DTB``: This flag determines whether to create COT descriptors 1169 at runtime using fconf. If this flag is enabled, COT descriptors are 1170 statically captured in tb_fw_config file in the form of device tree nodes 1171 and properties. Currently, COT descriptors used by BL2 are moved to the 1172 device tree and COT descriptors used by BL1 are retained in the code 1173 base statically. 1174 1175- ``SDEI_IN_FCONF``: This flag determines whether to configure SDEI setup in 1176 runtime using firmware configuration framework. The platform specific SDEI 1177 shared and private events configuration is retrieved from device tree rather 1178 than static C structures at compile time. This is only supported if 1179 SDEI_SUPPORT build flag is enabled. 1180 1181- ``SEC_INT_DESC_IN_FCONF``: This flag determines whether to configure Group 0 1182 and Group1 secure interrupts using the firmware configuration framework. The 1183 platform specific secure interrupt property descriptor is retrieved from 1184 device tree in runtime rather than depending on static C structure at compile 1185 time. 1186 1187- ``USE_ROMLIB``: This flag determines whether library at ROM will be used. 1188 This feature creates a library of functions to be placed in ROM and thus 1189 reduces SRAM usage. Refer to :ref:`Library at ROM` for further details. Default 1190 is 0. 1191 1192- ``V``: Verbose build. If assigned anything other than 0, the build commands 1193 are printed. Default is 0. 1194 1195- ``VERSION_STRING``: String used in the log output for each TF-A image. 1196 Defaults to a string formed by concatenating the version number, build type 1197 and build string. 1198 1199- ``W``: Warning level. Some compiler warning options of interest have been 1200 regrouped and put in the root Makefile. This flag can take the values 0 to 3, 1201 each level enabling more warning options. Default is 0. 1202 1203 This option is closely related to the ``E`` option, which enables 1204 ``-Werror``. 1205 1206 - ``W=0`` (default) 1207 1208 Enables a wide assortment of warnings, most notably ``-Wall`` and 1209 ``-Wextra``, as well as various bad practices and things that are likely to 1210 result in errors. Includes some compiler specific flags. No warnings are 1211 expected at this level for any build. 1212 1213 - ``W=1`` 1214 1215 Enables warnings we want the generic build to include but are too time 1216 consuming to fix at the moment. It re-enables warnings taken out for 1217 ``W=0`` builds (a few of the ``-Wextra`` additions). This level is expected 1218 to eventually be merged into ``W=0``. Some warnings are expected on some 1219 builds, but new contributions should not introduce new ones. 1220 1221 - ``W=2`` (recommended) 1222 1223 Enables warnings we want the generic build to include but cannot be enabled 1224 due to external libraries. This level is expected to eventually be merged 1225 into ``W=0``. Lots of warnings are expected, primarily from external 1226 libraries like zlib and compiler-rt, but new controbutions should not 1227 introduce new ones. 1228 1229 - ``W=3`` 1230 1231 Enables warnings that are informative but not necessary and generally too 1232 verbose and frequently ignored. A very large number of warnings are 1233 expected. 1234 1235 The exact set of warning flags depends on the compiler and TF-A warning 1236 level, however they are all succinctly set in the top-level Makefile. Please 1237 refer to the `GCC`_ or `Clang`_ documentation for more information on the 1238 individual flags. 1239 1240- ``WARMBOOT_ENABLE_DCACHE_EARLY`` : Boolean option to enable D-cache early on 1241 the CPU after warm boot. This is applicable for platforms which do not 1242 require interconnect programming to enable cache coherency (eg: single 1243 cluster platforms). If this option is enabled, then warm boot path 1244 enables D-caches immediately after enabling MMU. This option defaults to 0. 1245 1246- ``ERRATA_SPECULATIVE_AT``: This flag determines whether to enable ``AT`` 1247 speculative errata workaround or not. It accepts 2 values: ``1`` and ``0``. 1248 The default value of this flag is ``0``. 1249 1250 ``AT`` speculative errata workaround disables stage1 page table walk for 1251 lower ELs (EL1 and EL0) in EL3 so that ``AT`` speculative fetch at any point 1252 produces either the correct result or failure without TLB allocation. 1253 1254 This boolean option enables errata for all below CPUs. 1255 1256 +---------+--------------+-------------------------+ 1257 | Errata | CPU | Workaround Define | 1258 +=========+==============+=========================+ 1259 | 1165522 | Cortex-A76 | ``ERRATA_A76_1165522`` | 1260 +---------+--------------+-------------------------+ 1261 | 1319367 | Cortex-A72 | ``ERRATA_A72_1319367`` | 1262 +---------+--------------+-------------------------+ 1263 | 1319537 | Cortex-A57 | ``ERRATA_A57_1319537`` | 1264 +---------+--------------+-------------------------+ 1265 | 1530923 | Cortex-A55 | ``ERRATA_A55_1530923`` | 1266 +---------+--------------+-------------------------+ 1267 | 1530924 | Cortex-A53 | ``ERRATA_A53_1530924`` | 1268 +---------+--------------+-------------------------+ 1269 1270 .. note:: 1271 This option is enabled by build only if platform sets any of above defines 1272 mentioned in ’Workaround Define' column in the table. 1273 If this option is enabled for the EL3 software then EL2 software also must 1274 implement this workaround due to the behaviour of the errata mentioned 1275 in new SDEN document which will get published soon. 1276 1277- ``ERRATA_SME_POWER_DOWN``: Boolean option to disable SME (PSTATE.{ZA,SM}=0) 1278 before power down and downgrade a suspend to power down request to a normal 1279 suspend request. This is necessary when software running at lower ELs requests 1280 power down without first clearing these bits. On affected cores, the CME 1281 connected to it will reject its power down request. The default value is 0. 1282 1283- ``RAS_TRAP_NS_ERR_REC_ACCESS``: This flag enables/disables the SCR_EL3.TERR 1284 bit, to trap access to the RAS ERR and RAS ERX registers from lower ELs. 1285 This flag is disabled by default. 1286 1287- ``OPENSSL_DIR``: This option is used to provide the path to a directory on the 1288 host machine where a custom installation of OpenSSL is located, which is used 1289 to build the certificate generation, firmware encryption and FIP tools. If 1290 this option is not set, the default OS installation will be used. 1291 1292- ``USE_SP804_TIMER``: Use the SP804 timer instead of the Generic Timer for 1293 functions that wait for an arbitrary time length (udelay and mdelay). The 1294 default value is 0. 1295 1296- ``ENABLE_BRBE_FOR_NS``: Numeric value to enable access to the branch record 1297 buffer registers from NS ELs when FEAT_BRBE is implemented. BRBE is an 1298 optional architectural feature for AArch64. This flag can take the values 1299 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. The default is 0 1300 and it is automatically disabled when the target architecture is AArch32. 1301 1302- ``ENABLE_TRBE_FOR_NS``: Numeric value to enable access of trace buffer 1303 control registers from NS ELs, NS-EL2 or NS-EL1(when NS-EL2 is implemented 1304 but unused) when FEAT_TRBE is implemented. TRBE is an optional architectural 1305 feature for AArch64. This flag can take the values 0 to 2, to align with the 1306 ``ENABLE_FEAT`` mechanism. The default is 0 and it is automatically 1307 disabled when the target architecture is AArch32. 1308 1309- ``ENABLE_SYS_REG_TRACE_FOR_NS``: Numeric value to enable trace system 1310 registers access from NS ELs, NS-EL2 or NS-EL1 (when NS-EL2 is implemented 1311 but unused). This feature is available if trace unit such as ETMv4.x, and 1312 ETE(extending ETM feature) is implemented. This flag can take the values 1313 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. The default is 0. 1314 1315- ``ENABLE_TRF_FOR_NS``: Numeric value to enable trace filter control registers 1316 access from NS ELs, NS-EL2 or NS-EL1 (when NS-EL2 is implemented but unused), 1317 if FEAT_TRF is implemented. This flag can take the values 0 to 2, to align 1318 with the ``ENABLE_FEAT`` mechanism. This flag is disabled by default. 1319 1320- ``CONDITIONAL_CMO``: Boolean option to enable call to platform-defined routine 1321 ``plat_can_cmo`` which will return zero if cache management operations should 1322 be skipped and non-zero otherwise. By default, this option is disabled which 1323 means platform hook won't be checked and CMOs will always be performed when 1324 related functions are called. 1325 1326- ``ERRATA_ABI_SUPPORT``: Boolean option to enable support for Errata management 1327 firmware interface for the BL31 image. By default its disabled (``0``). 1328 1329- ``ERRATA_NON_ARM_INTERCONNECT``: Boolean option to enable support for the 1330 errata mitigation for platforms with a non-arm interconnect using the errata 1331 ABI. By default its disabled (``0``). 1332 1333- ``ENABLE_CONSOLE_GETC``: Boolean option to enable `getc()` feature in console 1334 driver(s). By default it is disabled (``0``) because it constitutes an attack 1335 vector into TF-A by potentially allowing an attacker to inject arbitrary data. 1336 This option should only be enabled on a need basis if there is a use case for 1337 reading characters from the console. 1338 1339GIC driver options 1340-------------------- 1341 1342The generic GIC driver can be included with the ``USE_GIC_DRIVER`` option. It is 1343a numeric option that can take the following values: 1344 1345 - ``0``: generic GIC driver not enabled. Any support is entirely in platform 1346 code. Strongly discouraged for GIC based interrupt controllers. 1347 1348 - ``1``: enable the use of the generic GIC driver but do not include any files 1349 or function definitions. It is then the platform's responsibility to provide 1350 these. This is useful if the platform either has a custom GIC implementation 1351 or an alternative interrupt controller design. Use of this option is strongly 1352 discouraged for standard GIC implementations. 1353 1354 - ``2``: use the GICv2 driver 1355 1356 - ``3``: use the GICv3 driver. See the next section on how to further configure 1357 it. Use this option for GICv4 implementations. Requires calling 1358 ``gic_set_gicr_frames()``. 1359 1360 - ``5``: use the EXPERIMENTAL GICv5 driver. Requires ``ENABLE_FEAT_GCIE=1``. 1361 1362 For GIC driver versions other than ``1``, deciding when to save and restore GIC 1363 context on a power domain state transition, as well as any GIC actions outside 1364 of the PSCI library's visibility are the platform's responsibility. The driver 1365 provides implementations of all necessary subroutines, they only need to be 1366 called as appropriate. 1367 1368GICv3 driver options 1369~~~~~~~~~~~~~~~~~~~~ 1370 1371``USE_GIC_DRIVER=3`` is the preferred way of including GICv3 driver files. The 1372old (deprecated) way of included them is using the directive: 1373``include drivers/arm/gic/v3/gicv3.mk`` 1374 1375The driver can be configured with the following options set in the platform 1376makefile: 1377 1378- ``GICV3_SUPPORT_GIC600``: Add support for the GIC-600 variants of GICv3. 1379 Enabling this option will add runtime detection support for the 1380 GIC-600, so is safe to select even for a GIC500 implementation. 1381 This option defaults to 0. 1382 1383- ``GICV3_SUPPORT_GIC600AE_FMU``: Add support for the Fault Management Unit 1384 for GIC-600 AE. Enabling this option will introduce support to initialize 1385 the FMU. Platforms should call the init function during boot to enable the 1386 FMU and its safety mechanisms. This option defaults to 0. 1387 1388- ``GICV3_IMPL_GIC600_MULTICHIP``: Selects GIC-600 variant with multichip 1389 functionality. This option defaults to 0 1390 1391- ``GICV3_OVERRIDE_DISTIF_PWR_OPS``: Allows override of default implementation 1392 of ``arm_gicv3_distif_pre_save`` and ``arm_gicv3_distif_post_restore`` 1393 functions. This is required for FVP platform which need to simulate GIC save 1394 and restore during SYSTEM_SUSPEND without powering down GIC. Default is 0. 1395 1396- ``GIC_ENABLE_V4_EXTN`` : Enables GICv4 related changes in GICv3 driver. 1397 This option defaults to 0. 1398 1399- ``GIC_EXT_INTID``: When set to ``1``, GICv3 driver will support extended 1400 PPI (1056-1119) and SPI (4096-5119) range. This option defaults to 0. 1401 1402Debugging options 1403----------------- 1404 1405To compile a debug version and make the build more verbose use 1406 1407.. code:: shell 1408 1409 make PLAT=<platform> DEBUG=1 V=1 all 1410 1411AArch64 GCC 11 uses DWARF version 5 debugging symbols by default. Some tools 1412(for example Arm-DS) might not support this and may need an older version of 1413DWARF symbols to be emitted by GCC. This can be achieved by using the 1414``-gdwarf-<version>`` flag, with the version being set to 2, 3, 4 or 5. Setting 1415the version to 4 is recommended for Arm-DS. 1416 1417When debugging logic problems it might also be useful to disable all compiler 1418optimizations by using ``-O0``. 1419 1420.. warning:: 1421 Using ``-O0`` could cause output images to be larger and base addresses 1422 might need to be recalculated (see the **Memory layout on Arm development 1423 platforms** section in the :ref:`Firmware Design`). 1424 1425Extra debug options can be passed to the build system by setting ``CFLAGS`` or 1426``LDFLAGS``: 1427 1428.. code:: shell 1429 1430 CFLAGS='-O0 -gdwarf-2' \ 1431 make PLAT=<platform> DEBUG=1 V=1 all 1432 1433Note that using ``-Wl,`` style compilation driver options in ``CFLAGS`` will be 1434ignored as the linker is called directly. 1435 1436It is also possible to introduce an infinite loop to help in debugging the 1437post-BL2 phase of TF-A. This can be done by rebuilding BL1 with the 1438``SPIN_ON_BL1_EXIT=1`` build flag. Refer to the :ref:`build_options_common` 1439section. In this case, the developer may take control of the target using a 1440debugger when indicated by the console output. When using Arm-DS, the following 1441commands can be used: 1442 1443:: 1444 1445 # Stop target execution 1446 interrupt 1447 1448 # 1449 # Prepare your debugging environment, e.g. set breakpoints 1450 # 1451 1452 # Jump over the debug loop 1453 set var $AARCH64::$Core::$PC = $AARCH64::$Core::$PC + 4 1454 1455 # Resume execution 1456 continue 1457 1458.. _build_options_experimental: 1459 1460Experimental build options 1461--------------------------- 1462 1463Common build options 1464~~~~~~~~~~~~~~~~~~~~ 1465 1466- ``DICE_PROTECTION_ENVIRONMENT``: Boolean flag to specify the measured boot 1467 backend when ``MEASURED_BOOT`` is enabled. The default value is ``0``. When 1468 set to ``1`` then measurements and additional metadata collected during the 1469 measured boot process are sent to the DICE Protection Environment for storage 1470 and processing. A certificate chain, which represents the boot state of the 1471 device, can be queried from the DPE. 1472 1473- ``DRTM_SUPPORT``: Boolean flag to enable support for Dynamic Root of Trust 1474 for Measurement (DRTM). This feature has trust dependency on BL31 for taking 1475 the measurements and recording them as per `PSA DRTM specification`_. For 1476 platforms which use BL2 to load/authenticate BL31 ``TRUSTED_BOARD_BOOT`` can 1477 be used and for the platforms which use ``RESET_TO_BL31`` platform owners 1478 should have mechanism to authenticate BL31. This option defaults to 0. 1479 1480- ``ENABLE_RME``: Numeric value to enable support for the ARMv9 Realm 1481 Management Extension. This flag can take the values 0 to 2, to align with 1482 the ``ENABLE_FEAT`` mechanism. Default value is 0. 1483 1484- ``ENABLE_FEAT_MEC``: Numeric value to enable support for the ARMv9.2 Memory 1485 Encryption Contexts (MEC). This flag can take the values 0 to 2, to align 1486 with the ``ENABLE_FEAT`` mechanism. MEC supports multiple encryption 1487 contexts for Realm security state and only one encryption context for the 1488 rest of the security states. Default value is 0. 1489 1490- ``RMMD_ENABLE_EL3_TOKEN_SIGN``: Numeric value to enable support for singing 1491 realm attestation token signing requests in EL3. This flag can take the 1492 values 0 and 1. The default value is ``0``. When set to ``1``, this option 1493 enables additional RMMD SMCs to push and pop requests for signing to 1494 EL3 along with platform hooks that must be implemented to service those 1495 requests and responses. 1496 1497- ``ENABLE_SME_FOR_NS``: Numeric value to enable Scalable Matrix Extension 1498 (SME), SVE, and FPU/SIMD for the non-secure world only. These features share 1499 registers so are enabled together. Using this option without 1500 ENABLE_SME_FOR_SWD=1 will cause SME, SVE, and FPU/SIMD instructions in secure 1501 world to trap to EL3. Requires ``ENABLE_SVE_FOR_NS`` to be set as SME is a 1502 superset of SVE. SME is an optional architectural feature for AArch64. 1503 At this time, this build option cannot be used on systems that have 1504 SPD=spmd/SPM_MM and atempting to build with this option will fail. 1505 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 1506 mechanism. Default is 0. 1507 1508- ``ENABLE_SME2_FOR_NS``: Numeric value to enable Scalable Matrix Extension 1509 version 2 (SME2) for the non-secure world only. SME2 is an optional 1510 architectural feature for AArch64. 1511 This should be set along with ENABLE_SME_FOR_NS=1, if not, the default SME 1512 accesses will still be trapped. This flag can take the values 0 to 2, to 1513 align with the ``ENABLE_FEAT`` mechanism. Default is 0. 1514 1515- ``ENABLE_SME_FOR_SWD``: Boolean option to enable the Scalable Matrix 1516 Extension for secure world. Used along with SVE and FPU/SIMD. 1517 ENABLE_SME_FOR_NS and ENABLE_SVE_FOR_SWD must also be set to use this. 1518 Default is 0. 1519 1520- ``ENABLE_SPMD_LP`` : This boolean option is used jointly with the SPM 1521 Dispatcher option (``SPD=spmd``). When enabled (1) it indicates support 1522 for logical partitions in EL3, managed by the SPMD as defined in the 1523 FF-A v1.2 specification. This flag is disabled by default. This flag 1524 must not be used if ``SPMC_AT_EL3`` is enabled. 1525 1526- ``FEATURE_DETECTION``: Boolean option to enable the architectural features 1527 verification mechanism. This is a debug feature that compares the 1528 architectural features enabled through the feature specific build flags 1529 (ENABLE_FEAT_xxx) with the features actually available on the CPU running, 1530 and reports any discrepancies. 1531 This flag will also enable errata ordering checking for ``DEBUG`` builds. 1532 1533 It is expected that this feature is only used for flexible platforms like 1534 software emulators, or for hardware platforms at bringup time, to verify 1535 that the configured feature set matches the CPU. 1536 The ``FEATURE_DETECTION`` macro is disabled by default. 1537 1538- ``PSA_CRYPTO``: Boolean option for enabling MbedTLS PSA crypto APIs support. 1539 The platform will use PSA compliant Crypto APIs during authentication and 1540 image measurement process by enabling this option. It uses APIs defined as 1541 per the `PSA Crypto API specification`_. This feature is only supported if 1542 using MbedTLS 3.x version. It is disabled (``0``) by default. 1543 1544- ``LFA_SUPPORT``: Boolean flag to enable support for Live Firmware 1545 activation as per the specification. This option defaults to 0. 1546 1547- ``TRANSFER_LIST``: Setting this to ``1`` enables support for Firmware 1548 Handoff using Transfer List defined in `Firmware Handoff specification`_. 1549 This defaults to ``0``. Current implementation follows the Firmware Handoff 1550 specification v0.9. 1551 1552- ``USE_DEBUGFS``: When set to 1 this option exposes a virtual filesystem 1553 interface through BL31 as a SiP SMC function. 1554 Default is disabled (0). 1555 1556- ``HOB_LIST``: Setting this to ``1`` enables support for passing boot 1557 information using HOB defined in `Platform Initialization specification`_. 1558 This defaults to ``0``. 1559 1560- ``ENABLE_ACS_SMC``: When set to ``1``, this enables support for ACS SMC 1561 handler code to handle SMC calls from the Architecture Compliance Suite. The 1562 handler is intentionally empty to reserve the SMC section and allow 1563 project-specific implementations in future ACS use cases. 1564 1565Firmware update options 1566~~~~~~~~~~~~~~~~~~~~~~~ 1567 1568- ``PSA_FWU_SUPPORT``: Enable the firmware update mechanism as per the 1569 `PSA FW update specification`_. The default value is 0. 1570 PSA firmware update implementation has few limitations, such as: 1571 1572 - BL2 is not part of the protocol-updatable images. If BL2 needs to 1573 be updated, then it should be done through another platform-defined 1574 mechanism. 1575 1576 - It assumes the platform's hardware supports CRC32 instructions. 1577 1578- ``NR_OF_FW_BANKS``: Define the number of firmware banks. This flag is used 1579 in defining the firmware update metadata structure. This flag is by default 1580 set to '2'. 1581 1582- ``NR_OF_IMAGES_IN_FW_BANK``: Define the number of firmware images in each 1583 firmware bank. Each firmware bank must have the same number of images as per 1584 the `PSA FW update specification`_. 1585 This flag is used in defining the firmware update metadata structure. This 1586 flag is by default set to '1'. 1587 1588- ``PSA_FWU_METADATA_FW_STORE_DESC``: To be enabled when the FWU 1589 metadata contains image description. The default value is 1. 1590 1591 The version 2 of the FWU metadata allows for an opaque metadata 1592 structure where a platform can choose to not include the firmware 1593 store description in the metadata structure. This option indicates 1594 if the firmware store description, which provides information on 1595 the updatable images is part of the structure. 1596 1597-------------- 1598 1599*Copyright (c) 2019-2025, Arm Limited. All rights reserved.* 1600 1601.. _DEN0115: https://developer.arm.com/docs/den0115/latest 1602.. _PSA FW update specification: https://developer.arm.com/documentation/den0118/latest/ 1603.. _PSA DRTM specification: https://developer.arm.com/documentation/den0113/a 1604.. _GCC: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html 1605.. _Clang: https://clang.llvm.org/docs/DiagnosticsReference.html 1606.. _Firmware Handoff specification: https://github.com/FirmwareHandoff/firmware_handoff/releases/tag/v0.9 1607.. _PSA Crypto API specification: https://armmbed.github.io/mbed-crypto/html/ 1608.. _Platform Initialization specification: https://uefi.org/specs/PI/1.8/index.html 1609.. _TF-A public mailing list: https://lists.trustedfirmware.org/mailman3/lists/tf-a.lists.trustedfirmware.org/ 1610