1Build Options 2============= 3 4The TF-A build system supports the following build options. Unless mentioned 5otherwise, these options are expected to be specified at the build command 6line and are not to be modified in any component makefiles. Note that the 7build system doesn't track dependency for build options. Therefore, if any of 8the build options are changed from a previous build, a clean build must be 9performed. 10 11.. _build_options_common: 12 13Common build options 14-------------------- 15 16- ``AARCH32_INSTRUCTION_SET``: Choose the AArch32 instruction set that the 17 compiler should use. Valid values are T32 and A32. It defaults to T32 due to 18 code having a smaller resulting size. 19 20- ``AARCH32_SP`` : Choose the AArch32 Secure Payload component to be built as 21 as the BL32 image when ``ARCH=aarch32``. The value should be the path to the 22 directory containing the SP source, relative to the ``bl32/``; the directory 23 is expected to contain a makefile called ``<aarch32_sp-value>.mk``. 24 25- ``AMU_RESTRICT_COUNTERS``: Register reads to the group 1 counters will return 26 zero at all but the highest implemented exception level. External 27 memory-mapped debug accesses are unaffected by this control. 28 The default value is 1 for all platforms. 29 30- ``ARCH`` : Choose the target build architecture for TF-A. It can take either 31 ``aarch64`` or ``aarch32`` as values. By default, it is defined to 32 ``aarch64``. 33 34- ``ARM_ARCH_FEATURE``: Optional Arm Architecture build option which specifies 35 one or more feature modifiers. This option has the form ``[no]feature+...`` 36 and defaults to ``none``. It translates into compiler option 37 ``-march=armvX[.Y]-a+[no]feature+...``. See compiler's documentation for the 38 list of supported feature modifiers. 39 40- ``ARM_ARCH_MAJOR``: The major version of Arm Architecture to target when 41 compiling TF-A. Its value must be numeric, and defaults to 8 . See also, 42 *Armv8 Architecture Extensions* and *Armv7 Architecture Extensions* in 43 :ref:`Firmware Design`. 44 45- ``ARM_ARCH_MINOR``: The minor version of Arm Architecture to target when 46 compiling TF-A. Its value must be a numeric, and defaults to 0. See also, 47 *Armv8 Architecture Extensions* in :ref:`Firmware Design`. 48 49- ``ARM_BL2_SP_LIST_DTS``: Path to DTS file snippet to override the hardcoded 50 SP nodes in tb_fw_config. 51 52- ``ARM_SPMC_MANIFEST_DTS`` : path to an alternate manifest file used as the 53 SPMC Core manifest. Valid when ``SPD=spmd`` is selected. 54 55- ``BL2``: This is an optional build option which specifies the path to BL2 56 image for the ``fip`` target. In this case, the BL2 in the TF-A will not be 57 built. 58 59- ``BL2U``: This is an optional build option which specifies the path to 60 BL2U image. In this case, the BL2U in TF-A will not be built. 61 62- ``RESET_TO_BL2``: Boolean option to enable BL2 entrypoint as the CPU reset 63 vector instead of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 64 entrypoint) or 1 (CPU reset to BL2 entrypoint). 65 The default value is 0. 66 67- ``BL2_RUNS_AT_EL3``: This is an implicit flag to denote that BL2 runs at EL3. 68 While it is explicitly set to 1 when RESET_TO_BL2 is set to 1 it can also be 69 true in a 4-world system where RESET_TO_BL2 is 0. 70 71- ``BL2_ENABLE_SP_LOAD``: Boolean option to enable loading SP packages from the 72 FIP. Automatically enabled if ``SP_LAYOUT_FILE`` is provided. 73 74- ``BL2_IN_XIP_MEM``: In some use-cases BL2 will be stored in eXecute In Place 75 (XIP) memory, like BL1. In these use-cases, it is necessary to initialize 76 the RW sections in RAM, while leaving the RO sections in place. This option 77 enable this use-case. For now, this option is only supported 78 when RESET_TO_BL2 is set to '1'. 79 80- ``BL31``: This is an optional build option which specifies the path to 81 BL31 image for the ``fip`` target. In this case, the BL31 in TF-A will not 82 be built. 83 84- ``BL31_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 85 file that contains the BL31 private key in PEM format or a PKCS11 URI. If 86 ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 87 88- ``BL32``: This is an optional build option which specifies the path to 89 BL32 image for the ``fip`` target. In this case, the BL32 in TF-A will not 90 be built. 91 92- ``BL32_EXTRA1``: This is an optional build option which specifies the path to 93 Trusted OS Extra1 image for the ``fip`` target. 94 95- ``BL32_EXTRA2``: This is an optional build option which specifies the path to 96 Trusted OS Extra2 image for the ``fip`` target. 97 98- ``BL32_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 99 file that contains the BL32 private key in PEM format or a PKCS11 URI. If 100 ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 101 102- ``RMM``: This is an optional build option used when ``ENABLE_RME`` is set. 103 It specifies the path to RMM binary for the ``fip`` target. If the RMM option 104 is not specified, TF-A builds the TRP to load and run at R-EL2. 105 106- ``BL33``: Path to BL33 image in the host file system. This is mandatory for 107 ``fip`` target in case TF-A BL2 is used. 108 109- ``BL33_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 110 file that contains the BL33 private key in PEM format or a PKCS11 URI. If 111 ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 112 113- ``BRANCH_PROTECTION``: Numeric value to enable ARMv8.3 Pointer Authentication 114 and ARMv8.5 Branch Target Identification support for TF-A BL images themselves. 115 If enabled, it is needed to use a compiler that supports the option 116 ``-mbranch-protection``. Selects the branch protection features to use: 117- 0: Default value turns off all types of branch protection 118- 1: Enables all types of branch protection features 119- 2: Return address signing to its standard level 120- 3: Extend the signing to include leaf functions 121- 4: Turn on branch target identification mechanism 122 123 The table below summarizes ``BRANCH_PROTECTION`` values, GCC compilation options 124 and resulting PAuth/BTI features. 125 126 +-------+--------------+-------+-----+ 127 | Value | GCC option | PAuth | BTI | 128 +=======+==============+=======+=====+ 129 | 0 | none | N | N | 130 +-------+--------------+-------+-----+ 131 | 1 | standard | Y | Y | 132 +-------+--------------+-------+-----+ 133 | 2 | pac-ret | Y | N | 134 +-------+--------------+-------+-----+ 135 | 3 | pac-ret+leaf | Y | N | 136 +-------+--------------+-------+-----+ 137 | 4 | bti | N | Y | 138 +-------+--------------+-------+-----+ 139 140 This option defaults to 0. 141 Note that Pointer Authentication is enabled for Non-secure world 142 irrespective of the value of this option if the CPU supports it. 143 144- ``BUILD_MESSAGE_TIMESTAMP``: String used to identify the time and date of the 145 compilation of each build. It must be set to a C string (including quotes 146 where applicable). Defaults to a string that contains the time and date of 147 the compilation. 148 149- ``BUILD_STRING``: Input string for VERSION_STRING, which allows the TF-A 150 build to be uniquely identified. Defaults to the current git commit id. 151 152- ``BUILD_BASE``: Output directory for the build. Defaults to ``./build`` 153 154- ``CFLAGS``: Extra user options appended on the compiler's command line in 155 addition to the options set by the build system. 156 157- ``COLD_BOOT_SINGLE_CPU``: This option indicates whether the platform may 158 release several CPUs out of reset. It can take either 0 (several CPUs may be 159 brought up) or 1 (only one CPU will ever be brought up during cold reset). 160 Default is 0. If the platform always brings up a single CPU, there is no 161 need to distinguish between primary and secondary CPUs and the boot path can 162 be optimised. The ``plat_is_my_cpu_primary()`` and 163 ``plat_secondary_cold_boot_setup()`` platform porting interfaces do not need 164 to be implemented in this case. 165 166- ``COT``: When Trusted Boot is enabled, selects the desired chain of trust. 167 Defaults to ``tbbr``. 168 169- ``CRASH_REPORTING``: A non-zero value enables a console dump of processor 170 register state when an unexpected exception occurs during execution of 171 BL31. This option defaults to the value of ``DEBUG`` - i.e. by default 172 this is only enabled for a debug build of the firmware. 173 174- ``CREATE_KEYS``: This option is used when ``GENERATE_COT=1``. It tells the 175 certificate generation tool to create new keys in case no valid keys are 176 present or specified. Allowed options are '0' or '1'. Default is '1'. 177 178- ``CTX_INCLUDE_AARCH32_REGS`` : Boolean option that, when set to 1, will cause 179 the AArch32 system registers to be included when saving and restoring the 180 CPU context. The option must be set to 0 for AArch64-only platforms (that 181 is on hardware that does not implement AArch32, or at least not at EL1 and 182 higher ELs). Default value is 1. 183 184- ``CTX_INCLUDE_FPREGS``: Boolean option that, when set to 1, will cause the FP 185 registers to be included when saving and restoring the CPU context. Default 186 is 0. 187 188- ``CTX_INCLUDE_MPAM_REGS``: Boolean option that, when set to 1, will cause the 189 Memory System Resource Partitioning and Monitoring (MPAM) 190 registers to be included when saving and restoring the CPU context. 191 Default is '0'. 192 193- ``CTX_INCLUDE_NEVE_REGS``: Numeric value, when set will cause the Armv8.4-NV 194 registers to be saved/restored when entering/exiting an EL2 execution 195 context. This flag can take values 0 to 2, to align with the 196 ``ENABLE_FEAT`` mechanism. Default value is 0. 197 198- ``CTX_INCLUDE_PAUTH_REGS``: Numeric value to enable the Pointer 199 Authentication for Secure world. This will cause the ARMv8.3-PAuth registers 200 to be included when saving and restoring the CPU context as part of world 201 switch. This flag can take values 0 to 2, to align with ``ENABLE_FEAT`` 202 mechanism. Default value is 0. 203 204 Note that Pointer Authentication is enabled for Non-secure world irrespective 205 of the value of this flag if the CPU supports it. 206 207- ``CTX_INCLUDE_SVE_REGS``: Boolean option that, when set to 1, will cause the 208 SVE registers to be included when saving and restoring the CPU context. Note 209 that this build option requires ``ENABLE_SVE_FOR_SWD`` to be enabled. In 210 general, it is recommended to perform SVE context management in lower ELs 211 and skip in EL3 due to the additional cost of maintaining large data 212 structures to track the SVE state. Hence, the default value is 0. 213 214- ``DEBUG``: Chooses between a debug and release build. It can take either 0 215 (release) or 1 (debug) as values. 0 is the default. 216 217- ``DECRYPTION_SUPPORT``: This build flag enables the user to select the 218 authenticated decryption algorithm to be used to decrypt firmware/s during 219 boot. It accepts 2 values: ``aes_gcm`` and ``none``. The default value of 220 this flag is ``none`` to disable firmware decryption which is an optional 221 feature as per TBBR. 222 223- ``DISABLE_BIN_GENERATION``: Boolean option to disable the generation 224 of the binary image. If set to 1, then only the ELF image is built. 225 0 is the default. 226 227- ``DISABLE_MTPMU``: Numeric option to disable ``FEAT_MTPMU`` (Multi Threaded 228 PMU). ``FEAT_MTPMU`` is an optional feature available on Armv8.6 onwards. 229 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 230 mechanism. Default is ``0``. 231 232- ``DYN_DISABLE_AUTH``: Provides the capability to dynamically disable Trusted 233 Board Boot authentication at runtime. This option is meant to be enabled only 234 for development platforms. ``TRUSTED_BOARD_BOOT`` flag must be set if this 235 flag has to be enabled. 0 is the default. 236 237- ``E``: Boolean option to make warnings into errors. Default is 1. 238 239 When specifying higher warnings levels (``W=1`` and higher), this option 240 defaults to 0. This is done to encourage contributors to use them, as they 241 are expected to produce warnings that would otherwise fail the build. New 242 contributions are still expected to build with ``W=0`` and ``E=1`` (the 243 default). 244 245- ``EARLY_CONSOLE``: This option is used to enable early traces before default 246 console is properly setup. It introduces EARLY_* traces macros, that will 247 use the non-EARLY traces macros if the flag is enabled, or do nothing 248 otherwise. To use this feature, platforms will have to create the function 249 plat_setup_early_console(). 250 Default is 0 (disabled) 251 252- ``EL3_PAYLOAD_BASE``: This option enables booting an EL3 payload instead of 253 the normal boot flow. It must specify the entry point address of the EL3 254 payload. Please refer to the "Booting an EL3 payload" section for more 255 details. 256 257- ``ENABLE_AMU_AUXILIARY_COUNTERS``: Enables support for AMU auxiliary counters 258 (also known as group 1 counters). These are implementation-defined counters, 259 and as such require additional platform configuration. Default is 0. 260 261- ``ENABLE_ASSERTIONS``: This option controls whether or not calls to ``assert()`` 262 are compiled out. For debug builds, this option defaults to 1, and calls to 263 ``assert()`` are left in place. For release builds, this option defaults to 0 264 and calls to ``assert()`` function are compiled out. This option can be set 265 independently of ``DEBUG``. It can also be used to hide any auxiliary code 266 that is only required for the assertion and does not fit in the assertion 267 itself. 268 269- ``ENABLE_BACKTRACE``: This option controls whether to enable backtrace 270 dumps or not. It is supported in both AArch64 and AArch32. However, in 271 AArch32 the format of the frame records are not defined in the AAPCS and they 272 are defined by the implementation. This implementation of backtrace only 273 supports the format used by GCC when T32 interworking is disabled. For this 274 reason enabling this option in AArch32 will force the compiler to only 275 generate A32 code. This option is enabled by default only in AArch64 debug 276 builds, but this behaviour can be overridden in each platform's Makefile or 277 in the build command line. 278 279- ``ENABLE_FEAT`` 280 The Arm architecture defines several architecture extension features, 281 named FEAT_xxx in the architecure manual. Some of those features require 282 setup code in higher exception levels, other features might be used by TF-A 283 code itself. 284 Most of the feature flags defined in the TF-A build system permit to take 285 the values 0, 1 or 2, with the following meaning: 286 287 :: 288 289 ENABLE_FEAT_* = 0: Feature is disabled statically at compile time. 290 ENABLE_FEAT_* = 1: Feature is enabled unconditionally at compile time. 291 ENABLE_FEAT_* = 2: Feature is enabled, but checked at runtime. 292 293 When setting the flag to 0, the feature is disabled during compilation, 294 and the compiler's optimisation stage and the linker will try to remove 295 as much of this code as possible. 296 If it is defined to 1, the code will use the feature unconditionally, so the 297 CPU is expected to support that feature. The FEATURE_DETECTION debug 298 feature, if enabled, will verify this. 299 If the feature flag is set to 2, support for the feature will be compiled 300 in, but its existence will be checked at runtime, so it works on CPUs with 301 or without the feature. This is mostly useful for platforms which either 302 support multiple different CPUs, or where the CPU is configured at runtime, 303 like in emulators. 304 305- ``ENABLE_FEAT_AMU``: Numeric value to enable Activity Monitor Unit 306 extensions. This flag can take the values 0 to 2, to align with the 307 ``ENABLE_FEAT`` mechanism. This is an optional architectural feature 308 available on v8.4 onwards. Some v8.2 implementations also implement an AMU 309 and this option can be used to enable this feature on those systems as well. 310 This flag can take the values 0 to 2, the default is 0. 311 312- ``ENABLE_FEAT_AMUv1p1``: Numeric value to enable the ``FEAT_AMUv1p1`` 313 extension. ``FEAT_AMUv1p1`` is an optional feature available on Arm v8.6 314 onwards. This flag can take the values 0 to 2, to align with the 315 ``ENABLE_FEAT`` mechanism. Default value is ``0``. 316 317- ``ENABLE_FEAT_CSV2_2``: Numeric value to enable the ``FEAT_CSV2_2`` 318 extension. It allows access to the SCXTNUM_EL2 (Software Context Number) 319 register during EL2 context save/restore operations. ``FEAT_CSV2_2`` is an 320 optional feature available on Arm v8.0 onwards. This flag can take values 321 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 322 Default value is ``0``. 323 324- ``ENABLE_FEAT_CSV2_3``: Numeric value to enable support for ``FEAT_CSV2_3`` 325 extension. This feature is supported in AArch64 state only and is an optional 326 feature available in Arm v8.0 implementations. 327 ``FEAT_CSV2_3`` implies the implementation of ``FEAT_CSV2_2``. 328 The flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 329 mechanism. Default value is ``0``. 330 331- ``ENABLE_FEAT_DEBUGV8P9``: Numeric value to enable ``FEAT_DEBUGV8P9`` 332 extension which allows the ability to implement more than 16 breakpoints 333 and/or watchpoints. This feature is mandatory from v8.9 and is optional 334 from v8.8. This flag can take the values of 0 to 2, to align with the 335 ``ENABLE_FEAT`` mechanism. Default value is ``0``. 336 337- ``ENABLE_FEAT_DIT``: Numeric value to enable ``FEAT_DIT`` (Data Independent 338 Timing) extension. It allows setting the ``DIT`` bit of PSTATE in EL3. 339 ``FEAT_DIT`` is a mandatory architectural feature and is enabled from v8.4 340 and upwards. This flag can take the values 0 to 2, to align with the 341 ``ENABLE_FEAT`` mechanism. Default value is ``0``. 342 343- ``ENABLE_FEAT_ECV``: Numeric value to enable support for the Enhanced Counter 344 Virtualization feature, allowing for access to the CNTPOFF_EL2 (Counter-timer 345 Physical Offset register) during EL2 to EL3 context save/restore operations. 346 Its a mandatory architectural feature and is enabled from v8.6 and upwards. 347 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 348 mechanism. Default value is ``0``. 349 350- ``ENABLE_FEAT_FPMR``: Numerical value to enable support for Floating Point 351 Mode Register feature, allowing access to the FPMR register. FPMR register 352 controls the behaviors of FP8 instructions. It is an optional architectural 353 feature from v9.2 and upwards. This flag can take value of 0 to 2, to align 354 with the ``FEATURE_DETECTION`` mechanism. Default value is ``0``. 355 356- ``ENABLE_FEAT_FGT``: Numeric value to enable support for FGT (Fine Grain Traps) 357 feature allowing for access to the HDFGRTR_EL2 (Hypervisor Debug Fine-Grained 358 Read Trap Register) during EL2 to EL3 context save/restore operations. 359 Its a mandatory architectural feature and is enabled from v8.6 and upwards. 360 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 361 mechanism. Default value is ``0``. 362 363- ``ENABLE_FEAT_FGT2``: Numeric value to enable support for FGT2 364 (Fine Grain Traps 2) feature allowing for access to Fine-grained trap 2 registers 365 during EL2 to EL3 context save/restore operations. 366 Its an optional architectural feature and is available from v8.8 and upwards. 367 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 368 mechanism. Default value is ``0``. 369 370- ``ENABLE_FEAT_HCX``: Numeric value to set the bit SCR_EL3.HXEn in EL3 to 371 allow access to HCRX_EL2 (extended hypervisor control register) from EL2 as 372 well as adding HCRX_EL2 to the EL2 context save/restore operations. Its a 373 mandatory architectural feature and is enabled from v8.7 and upwards. This 374 flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 375 mechanism. Default value is ``0``. 376 377- ``ENABLE_FEAT_MOPS``: Numeric value to enable FEAT_MOPS (Standardization 378 of memory operations) when INIT_UNUSED_NS_EL2=1. 379 This feature is mandatory from v8.8 and enabling of FEAT_MOPS does not 380 require any settings from EL3 as the controls are present in EL2 registers 381 (HCRX_EL2.{MSCEn,MCE2} and SCTLR_EL2.MSCEn) and in most configurations 382 we expect EL2 to be present. But in case of INIT_UNUSED_NS_EL2=1 , 383 EL3 should configure the EL2 registers. This flag 384 can take values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 385 Default value is ``0``. 386 387- ``ENABLE_FEAT_MTE2``: Numeric value to enable Memory Tagging Extension2 388 if the platform wants to use this feature and MTE2 is enabled at ELX. 389 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 390 mechanism. Default value is ``0``. 391 392- ``ENABLE_FEAT_PAN``: Numeric value to enable the ``FEAT_PAN`` (Privileged 393 Access Never) extension. ``FEAT_PAN`` adds a bit to PSTATE, generating a 394 permission fault for any privileged data access from EL1/EL2 to virtual 395 memory address, accessible at EL0, provided (HCR_EL2.E2H=1). It is a 396 mandatory architectural feature and is enabled from v8.1 and upwards. This 397 flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 398 mechanism. Default value is ``0``. 399 400- ``ENABLE_FEAT_RNG``: Numeric value to enable the ``FEAT_RNG`` extension. 401 ``FEAT_RNG`` is an optional feature available on Arm v8.5 onwards. This 402 flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 403 mechanism. Default value is ``0``. 404 405- ``ENABLE_FEAT_RNG_TRAP``: Numeric value to enable the ``FEAT_RNG_TRAP`` 406 extension. This feature is only supported in AArch64 state. This flag can 407 take values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 408 Default value is ``0``. ``FEAT_RNG_TRAP`` is an optional feature from 409 Armv8.5 onwards. 410 411- ``ENABLE_FEAT_SB``: Boolean option to let the TF-A code use the ``FEAT_SB`` 412 (Speculation Barrier) instruction ``FEAT_SB`` is an optional feature and 413 defaults to ``0`` for pre-Armv8.5 CPUs, but is mandatory for Armv8.5 or 414 later CPUs. It is enabled from v8.5 and upwards and if needed can be 415 overidden from platforms explicitly. 416 417- ``ENABLE_FEAT_SEL2``: Numeric value to enable the ``FEAT_SEL2`` (Secure EL2) 418 extension. ``FEAT_SEL2`` is a mandatory feature available on Arm v8.4. 419 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 420 mechanism. Default is ``0``. 421 422- ``ENABLE_FEAT_TWED``: Numeric value to enable the ``FEAT_TWED`` (Delayed 423 trapping of WFE Instruction) extension. ``FEAT_TWED`` is a optional feature 424 available on Arm v8.6. This flag can take values 0 to 2, to align with the 425 ``ENABLE_FEAT`` mechanism. Default is ``0``. 426 427 When ``ENABLE_FEAT_TWED`` is set to ``1``, WFE instruction trapping gets 428 delayed by the amount of value in ``TWED_DELAY``. 429 430- ``ENABLE_FEAT_VHE``: Numeric value to enable the ``FEAT_VHE`` (Virtualization 431 Host Extensions) extension. It allows access to CONTEXTIDR_EL2 register 432 during EL2 context save/restore operations.``FEAT_VHE`` is a mandatory 433 architectural feature and is enabled from v8.1 and upwards. It can take 434 values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 435 Default value is ``0``. 436 437- ``ENABLE_FEAT_TCR2``: Numeric value to set the bit SCR_EL3.ENTCR2 in EL3 to 438 allow access to TCR2_EL2 (extended translation control) from EL2 as 439 well as adding TCR2_EL2 to the EL2 context save/restore operations. Its a 440 mandatory architectural feature and is enabled from v8.9 and upwards. This 441 flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 442 mechanism. Default value is ``0``. 443 444- ``ENABLE_FEAT_S2PIE``: Numeric value to enable support for FEAT_S2PIE 445 at EL2 and below, and context switch relevant registers. This flag 446 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 447 mechanism. Default value is ``0``. 448 449- ``ENABLE_FEAT_S1PIE``: Numeric value to enable support for FEAT_S1PIE 450 at EL2 and below, and context switch relevant registers. This flag 451 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 452 mechanism. Default value is ``0``. 453 454- ``ENABLE_FEAT_S2POE``: Numeric value to enable support for FEAT_S2POE 455 at EL2 and below, and context switch relevant registers. This flag 456 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 457 mechanism. Default value is ``0``. 458 459- ``ENABLE_FEAT_S1POE``: Numeric value to enable support for FEAT_S1POE 460 at EL2 and below, and context switch relevant registers. This flag 461 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 462 mechanism. Default value is ``0``. 463 464- ``ENABLE_FEAT_GCS``: Numeric value to set the bit SCR_EL3.GCSEn in EL3 to 465 allow use of Guarded Control Stack from EL2 as well as adding the GCS 466 registers to the EL2 context save/restore operations. This flag can take 467 the values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 468 Default value is ``0``. 469 470- ``ENABLE_FEAT_THE``: Numeric value to enable support for FEAT_THE 471 (Translation Hardening Extension) at EL2 and below, setting the bit 472 SCR_EL3.RCWMASKEn in EL3 to allow access to RCWMASK_EL1 and RCWSMASK_EL1 473 registers and context switch them. 474 Its an optional architectural feature and is available from v8.8 and upwards. 475 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 476 mechanism. Default value is ``0``. 477 478- ``ENABLE_FEAT_SCTLR2``: Numeric value to enable support for FEAT_SCTLR2 479 (Extension to SCTLR_ELx) at EL2 and below, setting the bit 480 SCR_EL3.SCTLR2En in EL3 to allow access to SCTLR2_ELx registers and 481 context switch them. This feature is OPTIONAL from Armv8.0 implementations 482 and mandatory in Armv8.9 implementations. 483 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 484 mechanism. Default value is ``0``. 485 486- ``ENABLE_FEAT_D128``: Numeric value to enable support for FEAT_D128 487 at EL2 and below, setting the bit SCT_EL3.D128En in EL3 to allow access to 488 128 bit version of system registers like PAR_EL1, TTBR0_EL1, TTBR1_EL1, 489 TTBR0_EL2, TTBR1_EL2, TTBR0_EL12, TTBR1_EL12 , VTTBR_EL2, RCWMASK_EL1, and 490 RCWSMASK_EL1. Its an optional architectural feature and is available from 491 9.3 and upwards. 492 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 493 mechanism. Default value is ``0``. 494 495- ``ENABLE_LTO``: Boolean option to enable Link Time Optimization (LTO) 496 support in GCC for TF-A. This option is currently only supported for 497 AArch64. Default is 0. 498 499- ``ENABLE_FEAT_MPAM``: Numeric value to enable lower ELs to use MPAM 500 feature. MPAM is an optional Armv8.4 extension that enables various memory 501 system components and resources to define partitions; software running at 502 various ELs can assign themselves to desired partition to control their 503 performance aspects. 504 505 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 506 mechanism. When this option is set to ``1`` or ``2``, EL3 allows lower ELs to 507 access their own MPAM registers without trapping into EL3. This option 508 doesn't make use of partitioning in EL3, however. Platform initialisation 509 code should configure and use partitions in EL3 as required. This option 510 defaults to ``2`` since MPAM is enabled by default for NS world only. 511 The flag is automatically disabled when the target 512 architecture is AArch32. 513 514- ``ENABLE_FEAT_LS64_ACCDATA``: Numeric value to enable access and save and 515 restore the ACCDATA_EL1 system register, at EL2 and below. This flag can 516 take the values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 517 Default value is ``0``. 518 519- ``ENABLE_MPMM``: Boolean option to enable support for the Maximum Power 520 Mitigation Mechanism supported by certain Arm cores, which allows the SoC 521 firmware to detect and limit high activity events to assist in SoC processor 522 power domain dynamic power budgeting and limit the triggering of whole-rail 523 (i.e. clock chopping) responses to overcurrent conditions. Defaults to ``0``. 524 525 - ``FEAT_PABANDON``: Boolean option to enable support for powerdown abandon on 526 Arm cores that support it (currently Gelas and Travis). Extends the PSCI 527 implementation to expect waking up after the terminal ``wfi``. Currently, 528 introduces a performance penalty. Once this is removed, this option will be 529 removed and the feature will be enabled by default. Defaults to ``0``. 530 531- ``ENABLE_PIE``: Boolean option to enable Position Independent Executable(PIE) 532 support within generic code in TF-A. This option is currently only supported 533 in BL2, BL31, and BL32 (TSP) for AARCH64 binaries, and 534 in BL32 (SP_min) for AARCH32. Default is 0. 535 536- ``ENABLE_PMF``: Boolean option to enable support for optional Performance 537 Measurement Framework(PMF). Default is 0. 538 539- ``ENABLE_PSCI_STAT``: Boolean option to enable support for optional PSCI 540 functions ``PSCI_STAT_RESIDENCY`` and ``PSCI_STAT_COUNT``. Default is 0. 541 In the absence of an alternate stat collection backend, ``ENABLE_PMF`` must 542 be enabled. If ``ENABLE_PMF`` is set, the residency statistics are tracked in 543 software. 544 545- ``ENABLE_RUNTIME_INSTRUMENTATION``: Boolean option to enable runtime 546 instrumentation which injects timestamp collection points into TF-A to 547 allow runtime performance to be measured. Currently, only PSCI is 548 instrumented. Enabling this option enables the ``ENABLE_PMF`` build option 549 as well. Default is 0. 550 551- ``ENABLE_SPE_FOR_NS`` : Numeric value to enable Statistical Profiling 552 extensions. This is an optional architectural feature for AArch64. 553 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 554 mechanism. The default is 2 but is automatically disabled when the target 555 architecture is AArch32. 556 557- ``ENABLE_SVE_FOR_NS``: Numeric value to enable Scalable Vector Extension 558 (SVE) for the Non-secure world only. SVE is an optional architectural feature 559 for AArch64. This flag can take the values 0 to 2, to align with the 560 ``ENABLE_FEAT`` mechanism. At this time, this build option cannot be used on 561 systems that have SPM_MM enabled. The default value is 2. 562 563 Note that when SVE is enabled for the Non-secure world, access 564 to SVE, SIMD and floating-point functionality from the Secure world is 565 independently controlled by build option ``ENABLE_SVE_FOR_SWD``. When enabling 566 ``CTX_INCLUDE_FPREGS`` and ``ENABLE_SVE_FOR_NS`` together, it is mandatory to 567 enable ``CTX_INCLUDE_SVE_REGS``. This is to avoid corruption of the Non-secure 568 world data in the Z-registers which are aliased by the SIMD and FP registers. 569 570- ``ENABLE_SVE_FOR_SWD``: Boolean option to enable SVE and FPU/SIMD functionality 571 for the Secure world. SVE is an optional architectural feature for AArch64. 572 The default is 0 and it is automatically disabled when the target architecture 573 is AArch32. 574 575 .. note:: 576 This build flag requires ``ENABLE_SVE_FOR_NS`` to be enabled. When enabling 577 ``ENABLE_SVE_FOR_SWD``, a developer must carefully consider whether 578 ``CTX_INCLUDE_SVE_REGS`` is also needed. 579 580- ``ENABLE_STACK_PROTECTOR``: String option to enable the stack protection 581 checks in GCC. Allowed values are "all", "strong", "default" and "none". The 582 default value is set to "none". "strong" is the recommended stack protection 583 level if this feature is desired. "none" disables the stack protection. For 584 all values other than "none", the ``plat_get_stack_protector_canary()`` 585 platform hook needs to be implemented. The value is passed as the last 586 component of the option ``-fstack-protector-$ENABLE_STACK_PROTECTOR``. 587 588- ``ENABLE_ERRATA_ALL``: This option is used only for testing purposes, Boolean 589 option to enable the workarounds for all errata that TF-A implements. Normally 590 they should be explicitly enabled depending on each platform's needs. Not 591 recommended for release builds. This option is default set to 0. 592 593- ``ENCRYPT_BL31``: Binary flag to enable encryption of BL31 firmware. This 594 flag depends on ``DECRYPTION_SUPPORT`` build flag. 595 596- ``ENCRYPT_BL32``: Binary flag to enable encryption of Secure BL32 payload. 597 This flag depends on ``DECRYPTION_SUPPORT`` build flag. 598 599- ``ENC_KEY``: A 32-byte (256-bit) symmetric key in hex string format. It could 600 either be SSK or BSSK depending on ``FW_ENC_STATUS`` flag. This value depends 601 on ``DECRYPTION_SUPPORT`` build flag. 602 603- ``ENC_NONCE``: A 12-byte (96-bit) encryption nonce or Initialization Vector 604 (IV) in hex string format. This value depends on ``DECRYPTION_SUPPORT`` 605 build flag. 606 607- ``ERROR_DEPRECATED``: This option decides whether to treat the usage of 608 deprecated platform APIs, helper functions or drivers within Trusted 609 Firmware as error. It can take the value 1 (flag the use of deprecated 610 APIs as error) or 0. The default is 0. 611 612- ``ETHOSN_NPU_DRIVER``: boolean option to enable a SiP service that can 613 configure an Arm® Ethos™-N NPU. To use this service the target platform's 614 ``HW_CONFIG`` must include the device tree nodes for the NPU. Currently, only 615 the Arm Juno platform has this included in its ``HW_CONFIG`` and the platform 616 only loads the ``HW_CONFIG`` in AArch64 builds. Default is 0. 617 618- ``ETHOSN_NPU_TZMP1``: boolean option to enable TZMP1 support for the 619 Arm® Ethos™-N NPU. Requires ``ETHOSN_NPU_DRIVER`` and 620 ``TRUSTED_BOARD_BOOT`` to be enabled. 621 622- ``ETHOSN_NPU_FW``: location of the NPU firmware binary 623 (```ethosn.bin```). This firmware image will be included in the FIP and 624 loaded at runtime. 625 626- ``EL3_EXCEPTION_HANDLING``: When set to ``1``, enable handling of exceptions 627 targeted at EL3. When set ``0`` (default), no exceptions are expected or 628 handled at EL3, and a panic will result. The exception to this rule is when 629 ``SPMD_SPM_AT_SEL2`` is set to ``1``, in which case, only exceptions 630 occuring during normal world execution, are trapped to EL3. Any exception 631 trapped during secure world execution are trapped to the SPMC. This is 632 supported only for AArch64 builds. 633 634- ``EVENT_LOG_LEVEL``: Chooses the log level to use for Measured Boot when 635 ``MEASURED_BOOT`` is enabled. For a list of valid values, see ``LOG_LEVEL``. 636 Default value is 40 (LOG_LEVEL_INFO). 637 638- ``FAULT_INJECTION_SUPPORT``: ARMv8.4 extensions introduced support for fault 639 injection from lower ELs, and this build option enables lower ELs to use 640 Error Records accessed via System Registers to inject faults. This is 641 applicable only to AArch64 builds. 642 643 This feature is intended for testing purposes only, and is advisable to keep 644 disabled for production images. 645 646- ``FIP_NAME``: This is an optional build option which specifies the FIP 647 filename for the ``fip`` target. Default is ``fip.bin``. 648 649- ``FWU_FIP_NAME``: This is an optional build option which specifies the FWU 650 FIP filename for the ``fwu_fip`` target. Default is ``fwu_fip.bin``. 651 652- ``FW_ENC_STATUS``: Top level firmware's encryption numeric flag, values: 653 654 :: 655 656 0: Encryption is done with Secret Symmetric Key (SSK) which is common 657 for a class of devices. 658 1: Encryption is done with Binding Secret Symmetric Key (BSSK) which is 659 unique per device. 660 661 This flag depends on ``DECRYPTION_SUPPORT`` build flag. 662 663- ``GENERATE_COT``: Boolean flag used to build and execute the ``cert_create`` 664 tool to create certificates as per the Chain of Trust described in 665 :ref:`Trusted Board Boot`. The build system then calls ``fiptool`` to 666 include the certificates in the FIP and FWU_FIP. Default value is '0'. 667 668 Specify both ``TRUSTED_BOARD_BOOT=1`` and ``GENERATE_COT=1`` to include support 669 for the Trusted Board Boot feature in the BL1 and BL2 images, to generate 670 the corresponding certificates, and to include those certificates in the 671 FIP and FWU_FIP. 672 673 Note that if ``TRUSTED_BOARD_BOOT=0`` and ``GENERATE_COT=1``, the BL1 and BL2 674 images will not include support for Trusted Board Boot. The FIP will still 675 include the corresponding certificates. This FIP can be used to verify the 676 Chain of Trust on the host machine through other mechanisms. 677 678 Note that if ``TRUSTED_BOARD_BOOT=1`` and ``GENERATE_COT=0``, the BL1 and BL2 679 images will include support for Trusted Board Boot, but the FIP and FWU_FIP 680 will not include the corresponding certificates, causing a boot failure. 681 682- ``GICV2_G0_FOR_EL3``: Unlike GICv3, the GICv2 architecture doesn't have 683 inherent support for specific EL3 type interrupts. Setting this build option 684 to ``1`` assumes GICv2 *Group 0* interrupts are expected to target EL3, both 685 by :ref:`platform abstraction layer<platform Interrupt Controller API>` and 686 :ref:`Interrupt Management Framework<Interrupt Management Framework>`. 687 This allows GICv2 platforms to enable features requiring EL3 interrupt type. 688 This also means that all GICv2 Group 0 interrupts are delivered to EL3, and 689 the Secure Payload interrupts needs to be synchronously handed over to Secure 690 EL1 for handling. The default value of this option is ``0``, which means the 691 Group 0 interrupts are assumed to be handled by Secure EL1. 692 693- ``HANDLE_EA_EL3_FIRST_NS``: When set to ``1``, External Aborts and SError 694 Interrupts, resulting from errors in NS world, will be always trapped in 695 EL3 i.e. in BL31 at runtime. When set to ``0`` (default), these exceptions 696 will be trapped in the current exception level (or in EL1 if the current 697 exception level is EL0). 698 699- ``HW_ASSISTED_COHERENCY``: On most Arm systems to-date, platform-specific 700 software operations are required for CPUs to enter and exit coherency. 701 However, newer systems exist where CPUs' entry to and exit from coherency 702 is managed in hardware. Such systems require software to only initiate these 703 operations, and the rest is managed in hardware, minimizing active software 704 management. In such systems, this boolean option enables TF-A to carry out 705 build and run-time optimizations during boot and power management operations. 706 This option defaults to 0 and if it is enabled, then it implies 707 ``WARMBOOT_ENABLE_DCACHE_EARLY`` is also enabled. 708 709 If this flag is disabled while the platform which TF-A is compiled for 710 includes cores that manage coherency in hardware, then a compilation error is 711 generated. This is based on the fact that a system cannot have, at the same 712 time, cores that manage coherency in hardware and cores that don't. In other 713 words, a platform cannot have, at the same time, cores that require 714 ``HW_ASSISTED_COHERENCY=1`` and cores that require 715 ``HW_ASSISTED_COHERENCY=0``. 716 717 Note that, when ``HW_ASSISTED_COHERENCY`` is enabled, version 2 of 718 translation library (xlat tables v2) must be used; version 1 of translation 719 library is not supported. 720 721- ``IMPDEF_SYSREG_TRAP``: Numeric value to enable the handling traps for 722 implementation defined system register accesses from lower ELs. Default 723 value is ``0``. 724 725- ``INVERTED_MEMMAP``: memmap tool print by default lower addresses at the 726 bottom, higher addresses at the top. This build flag can be set to '1' to 727 invert this behavior. Lower addresses will be printed at the top and higher 728 addresses at the bottom. 729 730- ``INIT_UNUSED_NS_EL2``: This build flag guards code that disables EL2 731 safely in scenario where NS-EL2 is present but unused. This flag is set to 0 732 by default. Platforms without NS-EL2 in use must enable this flag. 733 734- ``KEY_ALG``: This build flag enables the user to select the algorithm to be 735 used for generating the PKCS keys and subsequent signing of the certificate. 736 It accepts 5 values: ``rsa``, ``rsa_1_5``, ``ecdsa``, ``ecdsa-brainpool-regular`` 737 and ``ecdsa-brainpool-twisted``. The option ``rsa_1_5`` is the legacy PKCS#1 738 RSA 1.5 algorithm which is not TBBR compliant and is retained only for 739 compatibility. The default value of this flag is ``rsa`` which is the TBBR 740 compliant PKCS#1 RSA 2.1 scheme. 741 742- ``KEY_SIZE``: This build flag enables the user to select the key size for 743 the algorithm specified by ``KEY_ALG``. The valid values for ``KEY_SIZE`` 744 depend on the chosen algorithm and the cryptographic module. 745 746 +---------------------------+------------------------------------+ 747 | KEY_ALG | Possible key sizes | 748 +===========================+====================================+ 749 | rsa | 1024 , 2048 (default), 3072, 4096 | 750 +---------------------------+------------------------------------+ 751 | ecdsa | 256 (default), 384 | 752 +---------------------------+------------------------------------+ 753 | ecdsa-brainpool-regular | 256 (default) | 754 +---------------------------+------------------------------------+ 755 | ecdsa-brainpool-twisted | 256 (default) | 756 +---------------------------+------------------------------------+ 757 758- ``HASH_ALG``: This build flag enables the user to select the secure hash 759 algorithm. It accepts 3 values: ``sha256``, ``sha384`` and ``sha512``. 760 The default value of this flag is ``sha256``. 761 762- ``LDFLAGS``: Extra user options appended to the linkers' command line in 763 addition to the one set by the build system. 764 765- ``LOG_LEVEL``: Chooses the log level, which controls the amount of console log 766 output compiled into the build. This should be one of the following: 767 768 :: 769 770 0 (LOG_LEVEL_NONE) 771 10 (LOG_LEVEL_ERROR) 772 20 (LOG_LEVEL_NOTICE) 773 30 (LOG_LEVEL_WARNING) 774 40 (LOG_LEVEL_INFO) 775 50 (LOG_LEVEL_VERBOSE) 776 777 All log output up to and including the selected log level is compiled into 778 the build. The default value is 40 in debug builds and 20 in release builds. 779 780- ``MEASURED_BOOT``: Boolean flag to include support for the Measured Boot 781 feature. This flag can be enabled with ``TRUSTED_BOARD_BOOT`` in order to 782 provide trust that the code taking the measurements and recording them has 783 not been tampered with. 784 785 This option defaults to 0. 786 787- ``MARCH_DIRECTIVE``: used to pass a -march option from the platform build 788 options to the compiler. An example usage: 789 790 .. code:: make 791 792 MARCH_DIRECTIVE := -march=armv8.5-a 793 794- ``HARDEN_SLS``: used to pass -mharden-sls=all from the TF-A build 795 options to the compiler currently supporting only of the options. 796 GCC documentation: 797 https://gcc.gnu.org/onlinedocs/gcc/AArch64-Options.html#index-mharden-sls 798 799 An example usage: 800 801 .. code:: make 802 803 HARDEN_SLS := 1 804 805 This option defaults to 0. 806 807- ``NON_TRUSTED_WORLD_KEY``: This option is used when ``GENERATE_COT=1``. It 808 specifies a file that contains the Non-Trusted World private key in PEM 809 format or a PKCS11 URI. If ``SAVE_KEYS=1``, only a file is accepted and it 810 will be used to save the key. 811 812- ``NS_BL2U``: Path to NS_BL2U image in the host file system. This image is 813 optional. It is only needed if the platform makefile specifies that it 814 is required in order to build the ``fwu_fip`` target. 815 816- ``NS_TIMER_SWITCH``: Enable save and restore for non-secure timer register 817 contents upon world switch. It can take either 0 (don't save and restore) or 818 1 (do save and restore). 0 is the default. An SPD may set this to 1 if it 819 wants the timer registers to be saved and restored. 820 821- ``OVERRIDE_LIBC``: This option allows platforms to override the default libc 822 for the BL image. It can be either 0 (include) or 1 (remove). The default 823 value is 0. 824 825- ``PL011_GENERIC_UART``: Boolean option to indicate the PL011 driver that 826 the underlying hardware is not a full PL011 UART but a minimally compliant 827 generic UART, which is a subset of the PL011. The driver will not access 828 any register that is not part of the SBSA generic UART specification. 829 Default value is 0 (a full PL011 compliant UART is present). 830 831- ``PLAT``: Choose a platform to build TF-A for. The chosen platform name 832 must be subdirectory of any depth under ``plat/``, and must contain a 833 platform makefile named ``platform.mk``. For example, to build TF-A for the 834 Arm Juno board, select PLAT=juno. 835 836- ``PLATFORM_REPORT_CTX_MEM_USE``: Reports the context memory allocated for 837 each core as well as the global context. The data includes the memory used 838 by each world and each privileged exception level. This build option is 839 applicable only for ``ARCH=aarch64`` builds. The default value is 0. 840 841- ``PRELOADED_BL33_BASE``: This option enables booting a preloaded BL33 image 842 instead of the normal boot flow. When defined, it must specify the entry 843 point address for the preloaded BL33 image. This option is incompatible with 844 ``EL3_PAYLOAD_BASE``. If both are defined, ``EL3_PAYLOAD_BASE`` has priority 845 over ``PRELOADED_BL33_BASE``. 846 847- ``PRESERVE_DSU_PMU_REGS``: This options when enabled allows the platform to 848 save/restore the DynamIQ Shared Unit's(DSU) Performance Monitoring Unit(PMU) 849 registers when the cluster goes through a power cycle. This is disabled by 850 default and platforms that require this feature have to enable them. 851 852- ``PROGRAMMABLE_RESET_ADDRESS``: This option indicates whether the reset 853 vector address can be programmed or is fixed on the platform. It can take 854 either 0 (fixed) or 1 (programmable). Default is 0. If the platform has a 855 programmable reset address, it is expected that a CPU will start executing 856 code directly at the right address, both on a cold and warm reset. In this 857 case, there is no need to identify the entrypoint on boot and the boot path 858 can be optimised. The ``plat_get_my_entrypoint()`` platform porting interface 859 does not need to be implemented in this case. 860 861- ``PSCI_EXTENDED_STATE_ID``: As per PSCI1.0 Specification, there are 2 formats 862 possible for the PSCI power-state parameter: original and extended State-ID 863 formats. This flag if set to 1, configures the generic PSCI layer to use the 864 extended format. The default value of this flag is 0, which means by default 865 the original power-state format is used by the PSCI implementation. This flag 866 should be specified by the platform makefile and it governs the return value 867 of PSCI_FEATURES API for CPU_SUSPEND smc function id. When this option is 868 enabled on Arm platforms, the option ``ARM_RECOM_STATE_ID_ENC`` needs to be 869 set to 1 as well. 870 871- ``PSCI_OS_INIT_MODE``: Boolean flag to enable support for optional PSCI 872 OS-initiated mode. This option defaults to 0. 873 874- ``ARCH_FEATURE_AVAILABILITY``: Boolean flag to enable support for the 875 optional SMCCC_ARCH_FEATURE_AVAILABILITY call. This option implicitly 876 interacts with IMPDEF_SYSREG_TRAP and software emulation. This option 877 defaults to 0. 878 879- ``ENABLE_FEAT_RAS``: Boolean flag to enable Armv8.2 RAS features. RAS features 880 are an optional extension for pre-Armv8.2 CPUs, but are mandatory for Armv8.2 881 or later CPUs. This flag can take the values 0 or 1. The default value is 0. 882 NOTE: This flag enables use of IESB capability to reduce entry latency into 883 EL3 even when RAS error handling is not performed on the platform. Hence this 884 flag is recommended to be turned on Armv8.2 and later CPUs. 885 886- ``RESET_TO_BL31``: Enable BL31 entrypoint as the CPU reset vector instead 887 of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 888 entrypoint) or 1 (CPU reset to BL31 entrypoint). 889 The default value is 0. 890 891- ``RESET_TO_SP_MIN``: SP_MIN is the minimal AArch32 Secure Payload provided 892 in TF-A. This flag configures SP_MIN entrypoint as the CPU reset vector 893 instead of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 894 entrypoint) or 1 (CPU reset to SP_MIN entrypoint). The default value is 0. 895 896- ``RME_GPT_BITLOCK_BLOCK``: This defines the block size (in number of 512MB 897- blocks) covered by a single bit of the bitlock structure during RME GPT 898- operations. The lower the block size, the better opportunity for 899- parallelising GPT operations but at the cost of more bits being needed 900- for the bitlock structure. This numeric parameter can take the values 901- from 0 to 512 and must be a power of 2. The value of 0 is special and 902- and it chooses a single spinlock for all GPT L1 table entries. Default 903- value is 1 which corresponds to block size of 512MB per bit of bitlock 904- structure. 905 906- ``RME_GPT_MAX_BLOCK``: Numeric value in MB to define the maximum size of 907 supported contiguous blocks in GPT Library. This parameter can take the 908 values 0, 2, 32 and 512. Setting this value to 0 disables use of Contigious 909 descriptors. Default value is 512. 910 911- ``ROT_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 912 file that contains the ROT private key in PEM format or a PKCS11 URI and 913 enforces public key hash generation. If ``SAVE_KEYS=1``, only a file is 914 accepted and it will be used to save the key. 915 916- ``SAVE_KEYS``: This option is used when ``GENERATE_COT=1``. It tells the 917 certificate generation tool to save the keys used to establish the Chain of 918 Trust. Allowed options are '0' or '1'. Default is '0' (do not save). 919 920- ``SCP_BL2``: Path to SCP_BL2 image in the host file system. This image is optional. 921 If a SCP_BL2 image is present then this option must be passed for the ``fip`` 922 target. 923 924- ``SCP_BL2_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 925 file that contains the SCP_BL2 private key in PEM format or a PKCS11 URI. 926 If ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 927 928- ``SCP_BL2U``: Path to SCP_BL2U image in the host file system. This image is 929 optional. It is only needed if the platform makefile specifies that it 930 is required in order to build the ``fwu_fip`` target. 931 932- ``SDEI_SUPPORT``: Setting this to ``1`` enables support for Software 933 Delegated Exception Interface to BL31 image. This defaults to ``0``. 934 935 When set to ``1``, the build option ``EL3_EXCEPTION_HANDLING`` must also be 936 set to ``1``. 937 938- ``SEPARATE_CODE_AND_RODATA``: Whether code and read-only data should be 939 isolated on separate memory pages. This is a trade-off between security and 940 memory usage. See "Isolating code and read-only data on separate memory 941 pages" section in :ref:`Firmware Design`. This flag is disabled by default 942 and affects all BL images. 943 944- ``SEPARATE_NOBITS_REGION``: Setting this option to ``1`` allows the NOBITS 945 sections of BL31 (.bss, stacks, page tables, and coherent memory) to be 946 allocated in RAM discontiguous from the loaded firmware image. When set, the 947 platform is expected to provide definitions for ``BL31_NOBITS_BASE`` and 948 ``BL31_NOBITS_LIMIT``. When the option is ``0`` (the default), NOBITS 949 sections are placed in RAM immediately following the loaded firmware image. 950 951- ``SEPARATE_BL2_NOLOAD_REGION``: Setting this option to ``1`` allows the 952 NOLOAD sections of BL2 (.bss, stacks, page tables) to be allocated in RAM 953 discontiguous from loaded firmware images. When set, the platform need to 954 provide definitions of ``BL2_NOLOAD_START`` and ``BL2_NOLOAD_LIMIT``. This 955 flag is disabled by default and NOLOAD sections are placed in RAM immediately 956 following the loaded firmware image. 957 958- ``SEPARATE_SIMD_SECTION``: Setting this option to ``1`` allows the SIMD context 959 data structures to be put in a dedicated memory region as decided by platform 960 integrator. Default value is ``0`` which means the SIMD context is put in BSS 961 section of EL3 firmware. 962 963- ``SMC_PCI_SUPPORT``: This option allows platforms to handle PCI configuration 964 access requests via a standard SMCCC defined in `DEN0115`_. When combined with 965 UEFI+ACPI this can provide a certain amount of OS forward compatibility 966 with newer platforms that aren't ECAM compliant. 967 968- ``SPD``: Choose a Secure Payload Dispatcher component to be built into TF-A. 969 This build option is only valid if ``ARCH=aarch64``. The value should be 970 the path to the directory containing the SPD source, relative to 971 ``services/spd/``; the directory is expected to contain a makefile called 972 ``<spd-value>.mk``. The SPM Dispatcher standard service is located in 973 services/std_svc/spmd and enabled by ``SPD=spmd``. The SPM Dispatcher 974 cannot be enabled when the ``SPM_MM`` option is enabled. 975 976- ``SPIN_ON_BL1_EXIT``: This option introduces an infinite loop in BL1. It can 977 take either 0 (no loop) or 1 (add a loop). 0 is the default. This loop stops 978 execution in BL1 just before handing over to BL31. At this point, all 979 firmware images have been loaded in memory, and the MMU and caches are 980 turned off. Refer to the "Debugging options" section for more details. 981 982- ``SPMC_AT_EL3`` : This boolean option is used jointly with the SPM 983 Dispatcher option (``SPD=spmd``). When enabled (1) it indicates the SPMC 984 component runs at the EL3 exception level. The default value is ``0`` ( 985 disabled). This configuration supports pre-Armv8.4 platforms (aka not 986 implementing the ``FEAT_SEL2`` extension). 987 988- ``SPMC_AT_EL3_SEL0_SP`` : Boolean option to enable SEL0 SP load support when 989 ``SPMC_AT_EL3`` is enabled. The default value if ``0`` (disabled). This 990 option cannot be enabled (``1``) when (``SPMC_AT_EL3``) is disabled. 991 992- ``SPMC_OPTEE`` : This boolean option is used jointly with the SPM 993 Dispatcher option (``SPD=spmd``) and with ``SPMD_SPM_AT_SEL2=0`` to 994 indicate that the SPMC at S-EL1 is OP-TEE and an OP-TEE specific loading 995 mechanism should be used. 996 997- ``SPMD_SPM_AT_SEL2`` : This boolean option is used jointly with the SPM 998 Dispatcher option (``SPD=spmd``). When enabled (1) it indicates the SPMC 999 component runs at the S-EL2 exception level provided by the ``FEAT_SEL2`` 1000 extension. This is the default when enabling the SPM Dispatcher. When 1001 disabled (0) it indicates the SPMC component runs at the S-EL1 execution 1002 state or at EL3 if ``SPMC_AT_EL3`` is enabled. The latter configurations 1003 support pre-Armv8.4 platforms (aka not implementing the ``FEAT_SEL2`` 1004 extension). 1005 1006- ``SPM_MM`` : Boolean option to enable the Management Mode (MM)-based Secure 1007 Partition Manager (SPM) implementation. The default value is ``0`` 1008 (disabled). This option cannot be enabled (``1``) when SPM Dispatcher is 1009 enabled (``SPD=spmd``). 1010 1011- ``SP_LAYOUT_FILE``: Platform provided path to JSON file containing the 1012 description of secure partitions. The build system will parse this file and 1013 package all secure partition blobs into the FIP. This file is not 1014 necessarily part of TF-A tree. Only available when ``SPD=spmd``. 1015 1016- ``SP_MIN_WITH_SECURE_FIQ``: Boolean flag to indicate the SP_MIN handles 1017 secure interrupts (caught through the FIQ line). Platforms can enable 1018 this directive if they need to handle such interruption. When enabled, 1019 the FIQ are handled in monitor mode and non secure world is not allowed 1020 to mask these events. Platforms that enable FIQ handling in SP_MIN shall 1021 implement the api ``sp_min_plat_fiq_handler()``. The default value is 0. 1022 1023- ``SVE_VECTOR_LEN``: SVE vector length to configure in ZCR_EL3. 1024 Platforms can configure this if they need to lower the hardware 1025 limit, for example due to asymmetric configuration or limitations of 1026 software run at lower ELs. The default is the architectural maximum 1027 of 2048 which should be suitable for most configurations, the 1028 hardware will limit the effective VL to the maximum physically supported 1029 VL. 1030 1031- ``TRNG_SUPPORT``: Setting this to ``1`` enables support for True 1032 Random Number Generator Interface to BL31 image. This defaults to ``0``. 1033 1034- ``TRUSTED_BOARD_BOOT``: Boolean flag to include support for the Trusted Board 1035 Boot feature. When set to '1', BL1 and BL2 images include support to load 1036 and verify the certificates and images in a FIP, and BL1 includes support 1037 for the Firmware Update. The default value is '0'. Generation and inclusion 1038 of certificates in the FIP and FWU_FIP depends upon the value of the 1039 ``GENERATE_COT`` option. 1040 1041 .. warning:: 1042 This option depends on ``CREATE_KEYS`` to be enabled. If the keys 1043 already exist in disk, they will be overwritten without further notice. 1044 1045- ``TRUSTED_WORLD_KEY``: This option is used when ``GENERATE_COT=1``. It 1046 specifies a file that contains the Trusted World private key in PEM 1047 format or a PKCS11 URI. If ``SAVE_KEYS=1``, only a file is accepted and 1048 it will be used to save the key. 1049 1050- ``TSP_INIT_ASYNC``: Choose BL32 initialization method as asynchronous or 1051 synchronous, (see "Initializing a BL32 Image" section in 1052 :ref:`Firmware Design`). It can take the value 0 (BL32 is initialized using 1053 synchronous method) or 1 (BL32 is initialized using asynchronous method). 1054 Default is 0. 1055 1056- ``TSP_NS_INTR_ASYNC_PREEMPT``: A non zero value enables the interrupt 1057 routing model which routes non-secure interrupts asynchronously from TSP 1058 to EL3 causing immediate preemption of TSP. The EL3 is responsible 1059 for saving and restoring the TSP context in this routing model. The 1060 default routing model (when the value is 0) is to route non-secure 1061 interrupts to TSP allowing it to save its context and hand over 1062 synchronously to EL3 via an SMC. 1063 1064 .. note:: 1065 When ``EL3_EXCEPTION_HANDLING`` is ``1``, ``TSP_NS_INTR_ASYNC_PREEMPT`` 1066 must also be set to ``1``. 1067 1068- ``TS_SP_FW_CONFIG``: DTC build flag to include Trusted Services (Crypto and 1069 internal-trusted-storage) as SP in tb_fw_config device tree. 1070 1071- ``TWED_DELAY``: Numeric value to be set in order to delay the trapping of 1072 WFE instruction. ``ENABLE_FEAT_TWED`` build option must be enabled to set 1073 this delay. It can take values in the range (0-15). Default value is ``0`` 1074 and based on this value, 2^(TWED_DELAY + 8) cycles will be delayed. 1075 Platforms need to explicitly update this value based on their requirements. 1076 1077- ``USE_ARM_LINK``: This flag determines whether to enable support for ARM 1078 linker. When the ``LINKER`` build variable points to the armlink linker, 1079 this flag is enabled automatically. To enable support for armlink, platforms 1080 will have to provide a scatter file for the BL image. Currently, Tegra 1081 platforms use the armlink support to compile BL3-1 images. 1082 1083- ``USE_COHERENT_MEM``: This flag determines whether to include the coherent 1084 memory region in the BL memory map or not (see "Use of Coherent memory in 1085 TF-A" section in :ref:`Firmware Design`). It can take the value 1 1086 (Coherent memory region is included) or 0 (Coherent memory region is 1087 excluded). Default is 1. 1088 1089- ``ARM_IO_IN_DTB``: This flag determines whether to use IO based on the 1090 firmware configuration framework. This will move the io_policies into a 1091 configuration device tree, instead of static structure in the code base. 1092 1093- ``COT_DESC_IN_DTB``: This flag determines whether to create COT descriptors 1094 at runtime using fconf. If this flag is enabled, COT descriptors are 1095 statically captured in tb_fw_config file in the form of device tree nodes 1096 and properties. Currently, COT descriptors used by BL2 are moved to the 1097 device tree and COT descriptors used by BL1 are retained in the code 1098 base statically. 1099 1100- ``SDEI_IN_FCONF``: This flag determines whether to configure SDEI setup in 1101 runtime using firmware configuration framework. The platform specific SDEI 1102 shared and private events configuration is retrieved from device tree rather 1103 than static C structures at compile time. This is only supported if 1104 SDEI_SUPPORT build flag is enabled. 1105 1106- ``SEC_INT_DESC_IN_FCONF``: This flag determines whether to configure Group 0 1107 and Group1 secure interrupts using the firmware configuration framework. The 1108 platform specific secure interrupt property descriptor is retrieved from 1109 device tree in runtime rather than depending on static C structure at compile 1110 time. 1111 1112- ``USE_ROMLIB``: This flag determines whether library at ROM will be used. 1113 This feature creates a library of functions to be placed in ROM and thus 1114 reduces SRAM usage. Refer to :ref:`Library at ROM` for further details. Default 1115 is 0. 1116 1117- ``V``: Verbose build. If assigned anything other than 0, the build commands 1118 are printed. Default is 0. 1119 1120- ``VERSION_STRING``: String used in the log output for each TF-A image. 1121 Defaults to a string formed by concatenating the version number, build type 1122 and build string. 1123 1124- ``W``: Warning level. Some compiler warning options of interest have been 1125 regrouped and put in the root Makefile. This flag can take the values 0 to 3, 1126 each level enabling more warning options. Default is 0. 1127 1128 This option is closely related to the ``E`` option, which enables 1129 ``-Werror``. 1130 1131 - ``W=0`` (default) 1132 1133 Enables a wide assortment of warnings, most notably ``-Wall`` and 1134 ``-Wextra``, as well as various bad practices and things that are likely to 1135 result in errors. Includes some compiler specific flags. No warnings are 1136 expected at this level for any build. 1137 1138 - ``W=1`` 1139 1140 Enables warnings we want the generic build to include but are too time 1141 consuming to fix at the moment. It re-enables warnings taken out for 1142 ``W=0`` builds (a few of the ``-Wextra`` additions). This level is expected 1143 to eventually be merged into ``W=0``. Some warnings are expected on some 1144 builds, but new contributions should not introduce new ones. 1145 1146 - ``W=2`` (recommended) 1147 1148 Enables warnings we want the generic build to include but cannot be enabled 1149 due to external libraries. This level is expected to eventually be merged 1150 into ``W=0``. Lots of warnings are expected, primarily from external 1151 libraries like zlib and compiler-rt, but new controbutions should not 1152 introduce new ones. 1153 1154 - ``W=3`` 1155 1156 Enables warnings that are informative but not necessary and generally too 1157 verbose and frequently ignored. A very large number of warnings are 1158 expected. 1159 1160 The exact set of warning flags depends on the compiler and TF-A warning 1161 level, however they are all succinctly set in the top-level Makefile. Please 1162 refer to the `GCC`_ or `Clang`_ documentation for more information on the 1163 individual flags. 1164 1165- ``WARMBOOT_ENABLE_DCACHE_EARLY`` : Boolean option to enable D-cache early on 1166 the CPU after warm boot. This is applicable for platforms which do not 1167 require interconnect programming to enable cache coherency (eg: single 1168 cluster platforms). If this option is enabled, then warm boot path 1169 enables D-caches immediately after enabling MMU. This option defaults to 0. 1170 1171- ``SUPPORT_STACK_MEMTAG``: This flag determines whether to enable memory 1172 tagging for stack or not. It accepts 2 values: ``yes`` and ``no``. The 1173 default value of this flag is ``no``. Note this option must be enabled only 1174 for ARM architecture greater than Armv8.5-A. 1175 1176- ``ERRATA_SPECULATIVE_AT``: This flag determines whether to enable ``AT`` 1177 speculative errata workaround or not. It accepts 2 values: ``1`` and ``0``. 1178 The default value of this flag is ``0``. 1179 1180 ``AT`` speculative errata workaround disables stage1 page table walk for 1181 lower ELs (EL1 and EL0) in EL3 so that ``AT`` speculative fetch at any point 1182 produces either the correct result or failure without TLB allocation. 1183 1184 This boolean option enables errata for all below CPUs. 1185 1186 +---------+--------------+-------------------------+ 1187 | Errata | CPU | Workaround Define | 1188 +=========+==============+=========================+ 1189 | 1165522 | Cortex-A76 | ``ERRATA_A76_1165522`` | 1190 +---------+--------------+-------------------------+ 1191 | 1319367 | Cortex-A72 | ``ERRATA_A72_1319367`` | 1192 +---------+--------------+-------------------------+ 1193 | 1319537 | Cortex-A57 | ``ERRATA_A57_1319537`` | 1194 +---------+--------------+-------------------------+ 1195 | 1530923 | Cortex-A55 | ``ERRATA_A55_1530923`` | 1196 +---------+--------------+-------------------------+ 1197 | 1530924 | Cortex-A53 | ``ERRATA_A53_1530924`` | 1198 +---------+--------------+-------------------------+ 1199 1200 .. note:: 1201 This option is enabled by build only if platform sets any of above defines 1202 mentioned in ’Workaround Define' column in the table. 1203 If this option is enabled for the EL3 software then EL2 software also must 1204 implement this workaround due to the behaviour of the errata mentioned 1205 in new SDEN document which will get published soon. 1206 1207- ``ERRATA_SME_POWER_DOWN``: Boolean option to disable SME (PSTATE.{ZA,SM}=0) 1208 before power down and downgrade a suspend to power down request to a normal 1209 suspend request. This is necessary when software running at lower ELs requests 1210 power down without first clearing these bits. On affected cores, the CME 1211 connected to it will reject its power down request. The default value is 0. 1212 1213- ``RAS_TRAP_NS_ERR_REC_ACCESS``: This flag enables/disables the SCR_EL3.TERR 1214 bit, to trap access to the RAS ERR and RAS ERX registers from lower ELs. 1215 This flag is disabled by default. 1216 1217- ``OPENSSL_DIR``: This option is used to provide the path to a directory on the 1218 host machine where a custom installation of OpenSSL is located, which is used 1219 to build the certificate generation, firmware encryption and FIP tools. If 1220 this option is not set, the default OS installation will be used. 1221 1222- ``USE_SP804_TIMER``: Use the SP804 timer instead of the Generic Timer for 1223 functions that wait for an arbitrary time length (udelay and mdelay). The 1224 default value is 0. 1225 1226- ``ENABLE_BRBE_FOR_NS``: Numeric value to enable access to the branch record 1227 buffer registers from NS ELs when FEAT_BRBE is implemented. BRBE is an 1228 optional architectural feature for AArch64. This flag can take the values 1229 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. The default is 0 1230 and it is automatically disabled when the target architecture is AArch32. 1231 1232- ``ENABLE_TRBE_FOR_NS``: Numeric value to enable access of trace buffer 1233 control registers from NS ELs, NS-EL2 or NS-EL1(when NS-EL2 is implemented 1234 but unused) when FEAT_TRBE is implemented. TRBE is an optional architectural 1235 feature for AArch64. This flag can take the values 0 to 2, to align with the 1236 ``ENABLE_FEAT`` mechanism. The default is 0 and it is automatically 1237 disabled when the target architecture is AArch32. 1238 1239- ``ENABLE_SYS_REG_TRACE_FOR_NS``: Numeric value to enable trace system 1240 registers access from NS ELs, NS-EL2 or NS-EL1 (when NS-EL2 is implemented 1241 but unused). This feature is available if trace unit such as ETMv4.x, and 1242 ETE(extending ETM feature) is implemented. This flag can take the values 1243 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. The default is 0. 1244 1245- ``ENABLE_TRF_FOR_NS``: Numeric value to enable trace filter control registers 1246 access from NS ELs, NS-EL2 or NS-EL1 (when NS-EL2 is implemented but unused), 1247 if FEAT_TRF is implemented. This flag can take the values 0 to 2, to align 1248 with the ``ENABLE_FEAT`` mechanism. This flag is disabled by default. 1249 1250- ``CONDITIONAL_CMO``: Boolean option to enable call to platform-defined routine 1251 ``plat_can_cmo`` which will return zero if cache management operations should 1252 be skipped and non-zero otherwise. By default, this option is disabled which 1253 means platform hook won't be checked and CMOs will always be performed when 1254 related functions are called. 1255 1256- ``ERRATA_ABI_SUPPORT``: Boolean option to enable support for Errata management 1257 firmware interface for the BL31 image. By default its disabled (``0``). 1258 1259- ``ERRATA_NON_ARM_INTERCONNECT``: Boolean option to enable support for the 1260 errata mitigation for platforms with a non-arm interconnect using the errata 1261 ABI. By default its disabled (``0``). 1262 1263- ``ENABLE_CONSOLE_GETC``: Boolean option to enable `getc()` feature in console 1264 driver(s). By default it is disabled (``0``) because it constitutes an attack 1265 vector into TF-A by potentially allowing an attacker to inject arbitrary data. 1266 This option should only be enabled on a need basis if there is a use case for 1267 reading characters from the console. 1268 1269GICv3 driver options 1270-------------------- 1271 1272GICv3 driver files are included using directive: 1273 1274``include drivers/arm/gic/v3/gicv3.mk`` 1275 1276The driver can be configured with the following options set in the platform 1277makefile: 1278 1279- ``GICV3_SUPPORT_GIC600``: Add support for the GIC-600 variants of GICv3. 1280 Enabling this option will add runtime detection support for the 1281 GIC-600, so is safe to select even for a GIC500 implementation. 1282 This option defaults to 0. 1283 1284- ``GICV3_SUPPORT_GIC600AE_FMU``: Add support for the Fault Management Unit 1285 for GIC-600 AE. Enabling this option will introduce support to initialize 1286 the FMU. Platforms should call the init function during boot to enable the 1287 FMU and its safety mechanisms. This option defaults to 0. 1288 1289- ``GICV3_IMPL_GIC600_MULTICHIP``: Selects GIC-600 variant with multichip 1290 functionality. This option defaults to 0 1291 1292- ``GICV3_OVERRIDE_DISTIF_PWR_OPS``: Allows override of default implementation 1293 of ``arm_gicv3_distif_pre_save`` and ``arm_gicv3_distif_post_restore`` 1294 functions. This is required for FVP platform which need to simulate GIC save 1295 and restore during SYSTEM_SUSPEND without powering down GIC. Default is 0. 1296 1297- ``GIC_ENABLE_V4_EXTN`` : Enables GICv4 related changes in GICv3 driver. 1298 This option defaults to 0. 1299 1300- ``GIC_EXT_INTID``: When set to ``1``, GICv3 driver will support extended 1301 PPI (1056-1119) and SPI (4096-5119) range. This option defaults to 0. 1302 1303Debugging options 1304----------------- 1305 1306To compile a debug version and make the build more verbose use 1307 1308.. code:: shell 1309 1310 make PLAT=<platform> DEBUG=1 V=1 all 1311 1312AArch64 GCC 11 uses DWARF version 5 debugging symbols by default. Some tools 1313(for example Arm-DS) might not support this and may need an older version of 1314DWARF symbols to be emitted by GCC. This can be achieved by using the 1315``-gdwarf-<version>`` flag, with the version being set to 2, 3, 4 or 5. Setting 1316the version to 4 is recommended for Arm-DS. 1317 1318When debugging logic problems it might also be useful to disable all compiler 1319optimizations by using ``-O0``. 1320 1321.. warning:: 1322 Using ``-O0`` could cause output images to be larger and base addresses 1323 might need to be recalculated (see the **Memory layout on Arm development 1324 platforms** section in the :ref:`Firmware Design`). 1325 1326Extra debug options can be passed to the build system by setting ``CFLAGS`` or 1327``LDFLAGS``: 1328 1329.. code:: shell 1330 1331 CFLAGS='-O0 -gdwarf-2' \ 1332 make PLAT=<platform> DEBUG=1 V=1 all 1333 1334Note that using ``-Wl,`` style compilation driver options in ``CFLAGS`` will be 1335ignored as the linker is called directly. 1336 1337It is also possible to introduce an infinite loop to help in debugging the 1338post-BL2 phase of TF-A. This can be done by rebuilding BL1 with the 1339``SPIN_ON_BL1_EXIT=1`` build flag. Refer to the :ref:`build_options_common` 1340section. In this case, the developer may take control of the target using a 1341debugger when indicated by the console output. When using Arm-DS, the following 1342commands can be used: 1343 1344:: 1345 1346 # Stop target execution 1347 interrupt 1348 1349 # 1350 # Prepare your debugging environment, e.g. set breakpoints 1351 # 1352 1353 # Jump over the debug loop 1354 set var $AARCH64::$Core::$PC = $AARCH64::$Core::$PC + 4 1355 1356 # Resume execution 1357 continue 1358 1359.. _build_options_experimental: 1360 1361Experimental build options 1362--------------------------- 1363 1364Common build options 1365~~~~~~~~~~~~~~~~~~~~ 1366 1367- ``DICE_PROTECTION_ENVIRONMENT``: Boolean flag to specify the measured boot 1368 backend when ``MEASURED_BOOT`` is enabled. The default value is ``0``. When 1369 set to ``1`` then measurements and additional metadata collected during the 1370 measured boot process are sent to the DICE Protection Environment for storage 1371 and processing. A certificate chain, which represents the boot state of the 1372 device, can be queried from the DPE. 1373 1374- ``DRTM_SUPPORT``: Boolean flag to enable support for Dynamic Root of Trust 1375 for Measurement (DRTM). This feature has trust dependency on BL31 for taking 1376 the measurements and recording them as per `PSA DRTM specification`_. For 1377 platforms which use BL2 to load/authenticate BL31 ``TRUSTED_BOARD_BOOT`` can 1378 be used and for the platforms which use ``RESET_TO_BL31`` platform owners 1379 should have mechanism to authenticate BL31. This option defaults to 0. 1380 1381- ``ENABLE_RME``: Numeric value to enable support for the ARMv9 Realm 1382 Management Extension. This flag can take the values 0 to 2, to align with 1383 the ``ENABLE_FEAT`` mechanism. Default value is 0. 1384 1385- ``RMMD_ENABLE_EL3_TOKEN_SIGN``: Numeric value to enable support for singing 1386 realm attestation token signing requests in EL3. This flag can take the 1387 values 0 and 1. The default value is ``0``. When set to ``1``, this option 1388 enables additional RMMD SMCs to push and pop requests for signing to 1389 EL3 along with platform hooks that must be implemented to service those 1390 requests and responses. 1391 1392- ``ENABLE_SME_FOR_NS``: Numeric value to enable Scalable Matrix Extension 1393 (SME), SVE, and FPU/SIMD for the non-secure world only. These features share 1394 registers so are enabled together. Using this option without 1395 ENABLE_SME_FOR_SWD=1 will cause SME, SVE, and FPU/SIMD instructions in secure 1396 world to trap to EL3. Requires ``ENABLE_SVE_FOR_NS`` to be set as SME is a 1397 superset of SVE. SME is an optional architectural feature for AArch64. 1398 At this time, this build option cannot be used on systems that have 1399 SPD=spmd/SPM_MM and atempting to build with this option will fail. 1400 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 1401 mechanism. Default is 0. 1402 1403- ``ENABLE_SME2_FOR_NS``: Numeric value to enable Scalable Matrix Extension 1404 version 2 (SME2) for the non-secure world only. SME2 is an optional 1405 architectural feature for AArch64. 1406 This should be set along with ENABLE_SME_FOR_NS=1, if not, the default SME 1407 accesses will still be trapped. This flag can take the values 0 to 2, to 1408 align with the ``ENABLE_FEAT`` mechanism. Default is 0. 1409 1410- ``ENABLE_SME_FOR_SWD``: Boolean option to enable the Scalable Matrix 1411 Extension for secure world. Used along with SVE and FPU/SIMD. 1412 ENABLE_SME_FOR_NS and ENABLE_SVE_FOR_SWD must also be set to use this. 1413 Default is 0. 1414 1415- ``ENABLE_SPMD_LP`` : This boolean option is used jointly with the SPM 1416 Dispatcher option (``SPD=spmd``). When enabled (1) it indicates support 1417 for logical partitions in EL3, managed by the SPMD as defined in the 1418 FF-A v1.2 specification. This flag is disabled by default. This flag 1419 must not be used if ``SPMC_AT_EL3`` is enabled. 1420 1421- ``FEATURE_DETECTION``: Boolean option to enable the architectural features 1422 verification mechanism. This is a debug feature that compares the 1423 architectural features enabled through the feature specific build flags 1424 (ENABLE_FEAT_xxx) with the features actually available on the CPU running, 1425 and reports any discrepancies. 1426 This flag will also enable errata ordering checking for ``DEBUG`` builds. 1427 1428 It is expected that this feature is only used for flexible platforms like 1429 software emulators, or for hardware platforms at bringup time, to verify 1430 that the configured feature set matches the CPU. 1431 The ``FEATURE_DETECTION`` macro is disabled by default. 1432 1433- ``PSA_CRYPTO``: Boolean option for enabling MbedTLS PSA crypto APIs support. 1434 The platform will use PSA compliant Crypto APIs during authentication and 1435 image measurement process by enabling this option. It uses APIs defined as 1436 per the `PSA Crypto API specification`_. This feature is only supported if 1437 using MbedTLS 3.x version. It is disabled (``0``) by default. 1438 1439- ``TRANSFER_LIST``: Setting this to ``1`` enables support for Firmware 1440 Handoff using Transfer List defined in `Firmware Handoff specification`_. 1441 This defaults to ``0``. Current implementation follows the Firmware Handoff 1442 specification v0.9. 1443 1444- ``USE_DEBUGFS``: When set to 1 this option exposes a virtual filesystem 1445 interface through BL31 as a SiP SMC function. 1446 Default is disabled (0). 1447 1448- ``HOB_LIST``: Setting this to ``1`` enables support for passing boot 1449 information using HOB defined in `Platform Initialization specification`_. 1450 This defaults to ``0``. 1451 1452Firmware update options 1453~~~~~~~~~~~~~~~~~~~~~~~ 1454 1455- ``PSA_FWU_SUPPORT``: Enable the firmware update mechanism as per the 1456 `PSA FW update specification`_. The default value is 0. 1457 PSA firmware update implementation has few limitations, such as: 1458 1459 - BL2 is not part of the protocol-updatable images. If BL2 needs to 1460 be updated, then it should be done through another platform-defined 1461 mechanism. 1462 1463 - It assumes the platform's hardware supports CRC32 instructions. 1464 1465- ``NR_OF_FW_BANKS``: Define the number of firmware banks. This flag is used 1466 in defining the firmware update metadata structure. This flag is by default 1467 set to '2'. 1468 1469- ``NR_OF_IMAGES_IN_FW_BANK``: Define the number of firmware images in each 1470 firmware bank. Each firmware bank must have the same number of images as per 1471 the `PSA FW update specification`_. 1472 This flag is used in defining the firmware update metadata structure. This 1473 flag is by default set to '1'. 1474 1475- ``PSA_FWU_METADATA_FW_STORE_DESC``: To be enabled when the FWU 1476 metadata contains image description. The default value is 1. 1477 1478 The version 2 of the FWU metadata allows for an opaque metadata 1479 structure where a platform can choose to not include the firmware 1480 store description in the metadata structure. This option indicates 1481 if the firmware store description, which provides information on 1482 the updatable images is part of the structure. 1483 1484-------------- 1485 1486*Copyright (c) 2019-2025, Arm Limited. All rights reserved.* 1487 1488.. _DEN0115: https://developer.arm.com/docs/den0115/latest 1489.. _PSA FW update specification: https://developer.arm.com/documentation/den0118/latest/ 1490.. _PSA DRTM specification: https://developer.arm.com/documentation/den0113/a 1491.. _GCC: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html 1492.. _Clang: https://clang.llvm.org/docs/DiagnosticsReference.html 1493.. _Firmware Handoff specification: https://github.com/FirmwareHandoff/firmware_handoff/releases/tag/v0.9 1494.. _PSA Crypto API specification: https://armmbed.github.io/mbed-crypto/html/ 1495.. _Platform Initialization specification: https://uefi.org/specs/PI/1.8/index.html 1496