1Build Options 2============= 3 4The TF-A build system supports the following build options. Unless mentioned 5otherwise, these options are expected to be specified at the build command 6line and are not to be modified in any component makefiles. Note that the 7build system doesn't track dependency for build options. Therefore, if any of 8the build options are changed from a previous build, a clean build must be 9performed. 10 11.. _build_options_common: 12 13Common build options 14-------------------- 15 16- ``AARCH32_INSTRUCTION_SET``: Choose the AArch32 instruction set that the 17 compiler should use. Valid values are T32 and A32. It defaults to T32 due to 18 code having a smaller resulting size. 19 20- ``AARCH32_SP`` : Choose the AArch32 Secure Payload component to be built as 21 as the BL32 image when ``ARCH=aarch32``. The value should be the path to the 22 directory containing the SP source, relative to the ``bl32/``; the directory 23 is expected to contain a makefile called ``<aarch32_sp-value>.mk``. 24 25- ``AMU_RESTRICT_COUNTERS``: Register reads to the group 1 counters will return 26 zero at all but the highest implemented exception level. External 27 memory-mapped debug accesses are unaffected by this control. 28 The default value is 1 for all platforms. 29 30- ``ARCH`` : Choose the target build architecture for TF-A. It can take either 31 ``aarch64`` or ``aarch32`` as values. By default, it is defined to 32 ``aarch64``. 33 34- ``ARM_ARCH_FEATURE``: Optional Arm Architecture build option which specifies 35 one or more feature modifiers. This option has the form ``[no]feature+...`` 36 and defaults to ``none``. It translates into compiler option 37 ``-march=armvX[.Y]-a+[no]feature+...``. See compiler's documentation for the 38 list of supported feature modifiers. 39 40- ``ARM_ARCH_MAJOR``: The major version of Arm Architecture to target when 41 compiling TF-A. Its value must be numeric, and defaults to 8 . See also, 42 *Armv8 Architecture Extensions* and *Armv7 Architecture Extensions* in 43 :ref:`Firmware Design`. 44 45- ``ARM_ARCH_MINOR``: The minor version of Arm Architecture to target when 46 compiling TF-A. Its value must be a numeric, and defaults to 0. See also, 47 *Armv8 Architecture Extensions* in :ref:`Firmware Design`. 48 49- ``ARM_BL2_SP_LIST_DTS``: Path to DTS file snippet to override the hardcoded 50 SP nodes in tb_fw_config. 51 52- ``ARM_SPMC_MANIFEST_DTS`` : path to an alternate manifest file used as the 53 SPMC Core manifest. Valid when ``SPD=spmd`` is selected. 54 55- ``BL2``: This is an optional build option which specifies the path to BL2 56 image for the ``fip`` target. In this case, the BL2 in the TF-A will not be 57 built. 58 59- ``BL2U``: This is an optional build option which specifies the path to 60 BL2U image. In this case, the BL2U in TF-A will not be built. 61 62- ``RESET_TO_BL2``: Boolean option to enable BL2 entrypoint as the CPU reset 63 vector instead of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 64 entrypoint) or 1 (CPU reset to BL2 entrypoint). 65 The default value is 0. 66 67- ``BL2_RUNS_AT_EL3``: This is an implicit flag to denote that BL2 runs at EL3. 68 While it is explicitly set to 1 when RESET_TO_BL2 is set to 1 it can also be 69 true in a 4-world system where RESET_TO_BL2 is 0. 70 71- ``BL2_ENABLE_SP_LOAD``: Boolean option to enable loading SP packages from the 72 FIP. Automatically enabled if ``SP_LAYOUT_FILE`` is provided. 73 74- ``BL2_IN_XIP_MEM``: In some use-cases BL2 will be stored in eXecute In Place 75 (XIP) memory, like BL1. In these use-cases, it is necessary to initialize 76 the RW sections in RAM, while leaving the RO sections in place. This option 77 enable this use-case. For now, this option is only supported 78 when RESET_TO_BL2 is set to '1'. 79 80- ``BL31``: This is an optional build option which specifies the path to 81 BL31 image for the ``fip`` target. In this case, the BL31 in TF-A will not 82 be built. 83 84- ``BL31_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 85 file that contains the BL31 private key in PEM format or a PKCS11 URI. If 86 ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 87 88- ``BL32``: This is an optional build option which specifies the path to 89 BL32 image for the ``fip`` target. In this case, the BL32 in TF-A will not 90 be built. 91 92- ``BL32_EXTRA1``: This is an optional build option which specifies the path to 93 Trusted OS Extra1 image for the ``fip`` target. 94 95- ``BL32_EXTRA2``: This is an optional build option which specifies the path to 96 Trusted OS Extra2 image for the ``fip`` target. 97 98- ``BL32_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 99 file that contains the BL32 private key in PEM format or a PKCS11 URI. If 100 ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 101 102- ``RMM``: This is an optional build option used when ``ENABLE_RME`` is set. 103 It specifies the path to RMM binary for the ``fip`` target. If the RMM option 104 is not specified, TF-A builds the TRP to load and run at R-EL2. 105 106- ``BL33``: Path to BL33 image in the host file system. This is mandatory for 107 ``fip`` target in case TF-A BL2 is used. 108 109- ``BL33_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 110 file that contains the BL33 private key in PEM format or a PKCS11 URI. If 111 ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 112 113- ``BRANCH_PROTECTION``: Numeric value to enable ARMv8.3 Pointer Authentication 114 and ARMv8.5 Branch Target Identification support for TF-A BL images themselves. 115 If enabled, it is needed to use a compiler that supports the option 116 ``-mbranch-protection``. Selects the branch protection features to use: 117- 0: Default value turns off all types of branch protection 118- 1: Enables all types of branch protection features 119- 2: Return address signing to its standard level 120- 3: Extend the signing to include leaf functions 121- 4: Turn on branch target identification mechanism 122 123 The table below summarizes ``BRANCH_PROTECTION`` values, GCC compilation options 124 and resulting PAuth/BTI features. 125 126 +-------+--------------+-------+-----+ 127 | Value | GCC option | PAuth | BTI | 128 +=======+==============+=======+=====+ 129 | 0 | none | N | N | 130 +-------+--------------+-------+-----+ 131 | 1 | standard | Y | Y | 132 +-------+--------------+-------+-----+ 133 | 2 | pac-ret | Y | N | 134 +-------+--------------+-------+-----+ 135 | 3 | pac-ret+leaf | Y | N | 136 +-------+--------------+-------+-----+ 137 | 4 | bti | N | Y | 138 +-------+--------------+-------+-----+ 139 140 This option defaults to 0. 141 Note that Pointer Authentication is enabled for Non-secure world 142 irrespective of the value of this option if the CPU supports it. 143 144- ``BUILD_MESSAGE_TIMESTAMP``: String used to identify the time and date of the 145 compilation of each build. It must be set to a C string (including quotes 146 where applicable). Defaults to a string that contains the time and date of 147 the compilation. 148 149- ``BUILD_STRING``: Input string for VERSION_STRING, which allows the TF-A 150 build to be uniquely identified. Defaults to the current git commit id. 151 152- ``BUILD_BASE``: Output directory for the build. Defaults to ``./build`` 153 154- ``CFLAGS``: Extra user options appended on the compiler's command line in 155 addition to the options set by the build system. 156 157- ``COLD_BOOT_SINGLE_CPU``: This option indicates whether the platform may 158 release several CPUs out of reset. It can take either 0 (several CPUs may be 159 brought up) or 1 (only one CPU will ever be brought up during cold reset). 160 Default is 0. If the platform always brings up a single CPU, there is no 161 need to distinguish between primary and secondary CPUs and the boot path can 162 be optimised. The ``plat_is_my_cpu_primary()`` and 163 ``plat_secondary_cold_boot_setup()`` platform porting interfaces do not need 164 to be implemented in this case. 165 166- ``COT``: When Trusted Boot is enabled, selects the desired chain of trust. 167 Defaults to ``tbbr``. 168 169- ``CRASH_REPORTING``: A non-zero value enables a console dump of processor 170 register state when an unexpected exception occurs during execution of 171 BL31. This option defaults to the value of ``DEBUG`` - i.e. by default 172 this is only enabled for a debug build of the firmware. 173 174- ``CREATE_KEYS``: This option is used when ``GENERATE_COT=1``. It tells the 175 certificate generation tool to create new keys in case no valid keys are 176 present or specified. Allowed options are '0' or '1'. Default is '1'. 177 178- ``CTX_INCLUDE_AARCH32_REGS`` : Boolean option that, when set to 1, will cause 179 the AArch32 system registers to be included when saving and restoring the 180 CPU context. The option must be set to 0 for AArch64-only platforms (that 181 is on hardware that does not implement AArch32, or at least not at EL1 and 182 higher ELs). Default value is 1. 183 184- ``CTX_INCLUDE_FPREGS``: Boolean option that, when set to 1, will cause the FP 185 registers to be included when saving and restoring the CPU context. Default 186 is 0. 187 188- ``CTX_INCLUDE_MPAM_REGS``: Boolean option that, when set to 1, will cause the 189 Memory System Resource Partitioning and Monitoring (MPAM) 190 registers to be included when saving and restoring the CPU context. 191 Default is '0'. 192 193- ``CTX_INCLUDE_NEVE_REGS``: Numeric value, when set will cause the Armv8.4-NV 194 registers to be saved/restored when entering/exiting an EL2 execution 195 context. This flag can take values 0 to 2, to align with the 196 ``ENABLE_FEAT`` mechanism. Default value is 0. 197 198- ``CTX_INCLUDE_PAUTH_REGS``: Numeric value to enable the Pointer 199 Authentication for Secure world. This will cause the ARMv8.3-PAuth registers 200 to be included when saving and restoring the CPU context as part of world 201 switch. This flag can take values 0 to 2, to align with ``ENABLE_FEAT`` 202 mechanism. Default value is 0. 203 204 Note that Pointer Authentication is enabled for Non-secure world irrespective 205 of the value of this flag if the CPU supports it. 206 207- ``CTX_INCLUDE_SVE_REGS``: Boolean option that, when set to 1, will cause the 208 SVE registers to be included when saving and restoring the CPU context. Note 209 that this build option requires ``ENABLE_SVE_FOR_SWD`` to be enabled. In 210 general, it is recommended to perform SVE context management in lower ELs 211 and skip in EL3 due to the additional cost of maintaining large data 212 structures to track the SVE state. Hence, the default value is 0. 213 214- ``DEBUG``: Chooses between a debug and release build. It can take either 0 215 (release) or 1 (debug) as values. 0 is the default. 216 217- ``DECRYPTION_SUPPORT``: This build flag enables the user to select the 218 authenticated decryption algorithm to be used to decrypt firmware/s during 219 boot. It accepts 2 values: ``aes_gcm`` and ``none``. The default value of 220 this flag is ``none`` to disable firmware decryption which is an optional 221 feature as per TBBR. 222 223- ``DISABLE_BIN_GENERATION``: Boolean option to disable the generation 224 of the binary image. If set to 1, then only the ELF image is built. 225 0 is the default. 226 227- ``DISABLE_MTPMU``: Numeric option to disable ``FEAT_MTPMU`` (Multi Threaded 228 PMU). ``FEAT_MTPMU`` is an optional feature available on Armv8.6 onwards. 229 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 230 mechanism. Default is ``0``. 231 232- ``DYN_DISABLE_AUTH``: Provides the capability to dynamically disable Trusted 233 Board Boot authentication at runtime. This option is meant to be enabled only 234 for development platforms. ``TRUSTED_BOARD_BOOT`` flag must be set if this 235 flag has to be enabled. 0 is the default. 236 237- ``E``: Boolean option to make warnings into errors. Default is 1. 238 239 When specifying higher warnings levels (``W=1`` and higher), this option 240 defaults to 0. This is done to encourage contributors to use them, as they 241 are expected to produce warnings that would otherwise fail the build. New 242 contributions are still expected to build with ``W=0`` and ``E=1`` (the 243 default). 244 245- ``EARLY_CONSOLE``: This option is used to enable early traces before default 246 console is properly setup. It introduces EARLY_* traces macros, that will 247 use the non-EARLY traces macros if the flag is enabled, or do nothing 248 otherwise. To use this feature, platforms will have to create the function 249 plat_setup_early_console(). 250 Default is 0 (disabled) 251 252- ``EL3_PAYLOAD_BASE``: This option enables booting an EL3 payload instead of 253 the normal boot flow. It must specify the entry point address of the EL3 254 payload. Please refer to the "Booting an EL3 payload" section for more 255 details. 256 257- ``ENABLE_AMU_AUXILIARY_COUNTERS``: Enables support for AMU auxiliary counters 258 (also known as group 1 counters). These are implementation-defined counters, 259 and as such require additional platform configuration. Default is 0. 260 261- ``ENABLE_AMU_FCONF``: Enables configuration of the AMU through FCONF, which 262 allows platforms with auxiliary counters to describe them via the 263 ``HW_CONFIG`` device tree blob. Default is 0. 264 265- ``ENABLE_ASSERTIONS``: This option controls whether or not calls to ``assert()`` 266 are compiled out. For debug builds, this option defaults to 1, and calls to 267 ``assert()`` are left in place. For release builds, this option defaults to 0 268 and calls to ``assert()`` function are compiled out. This option can be set 269 independently of ``DEBUG``. It can also be used to hide any auxiliary code 270 that is only required for the assertion and does not fit in the assertion 271 itself. 272 273- ``ENABLE_BACKTRACE``: This option controls whether to enable backtrace 274 dumps or not. It is supported in both AArch64 and AArch32. However, in 275 AArch32 the format of the frame records are not defined in the AAPCS and they 276 are defined by the implementation. This implementation of backtrace only 277 supports the format used by GCC when T32 interworking is disabled. For this 278 reason enabling this option in AArch32 will force the compiler to only 279 generate A32 code. This option is enabled by default only in AArch64 debug 280 builds, but this behaviour can be overridden in each platform's Makefile or 281 in the build command line. 282 283- ``ENABLE_FEAT`` 284 The Arm architecture defines several architecture extension features, 285 named FEAT_xxx in the architecure manual. Some of those features require 286 setup code in higher exception levels, other features might be used by TF-A 287 code itself. 288 Most of the feature flags defined in the TF-A build system permit to take 289 the values 0, 1 or 2, with the following meaning: 290 291 :: 292 293 ENABLE_FEAT_* = 0: Feature is disabled statically at compile time. 294 ENABLE_FEAT_* = 1: Feature is enabled unconditionally at compile time. 295 ENABLE_FEAT_* = 2: Feature is enabled, but checked at runtime. 296 297 When setting the flag to 0, the feature is disabled during compilation, 298 and the compiler's optimisation stage and the linker will try to remove 299 as much of this code as possible. 300 If it is defined to 1, the code will use the feature unconditionally, so the 301 CPU is expected to support that feature. The FEATURE_DETECTION debug 302 feature, if enabled, will verify this. 303 If the feature flag is set to 2, support for the feature will be compiled 304 in, but its existence will be checked at runtime, so it works on CPUs with 305 or without the feature. This is mostly useful for platforms which either 306 support multiple different CPUs, or where the CPU is configured at runtime, 307 like in emulators. 308 309- ``ENABLE_FEAT_AMU``: Numeric value to enable Activity Monitor Unit 310 extensions. This flag can take the values 0 to 2, to align with the 311 ``ENABLE_FEAT`` mechanism. This is an optional architectural feature 312 available on v8.4 onwards. Some v8.2 implementations also implement an AMU 313 and this option can be used to enable this feature on those systems as well. 314 This flag can take the values 0 to 2, the default is 0. 315 316- ``ENABLE_FEAT_AMUv1p1``: Numeric value to enable the ``FEAT_AMUv1p1`` 317 extension. ``FEAT_AMUv1p1`` is an optional feature available on Arm v8.6 318 onwards. This flag can take the values 0 to 2, to align with the 319 ``ENABLE_FEAT`` mechanism. Default value is ``0``. 320 321- ``ENABLE_FEAT_CSV2_2``: Numeric value to enable the ``FEAT_CSV2_2`` 322 extension. It allows access to the SCXTNUM_EL2 (Software Context Number) 323 register during EL2 context save/restore operations. ``FEAT_CSV2_2`` is an 324 optional feature available on Arm v8.0 onwards. This flag can take values 325 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 326 Default value is ``0``. 327 328- ``ENABLE_FEAT_CSV2_3``: Numeric value to enable support for ``FEAT_CSV2_3`` 329 extension. This feature is supported in AArch64 state only and is an optional 330 feature available in Arm v8.0 implementations. 331 ``FEAT_CSV2_3`` implies the implementation of ``FEAT_CSV2_2``. 332 The flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 333 mechanism. Default value is ``0``. 334 335- ``ENABLE_FEAT_DEBUGV8P9``: Numeric value to enable ``FEAT_DEBUGV8P9`` 336 extension which allows the ability to implement more than 16 breakpoints 337 and/or watchpoints. This feature is mandatory from v8.9 and is optional 338 from v8.8. This flag can take the values of 0 to 2, to align with the 339 ``ENABLE_FEAT`` mechanism. Default value is ``0``. 340 341- ``ENABLE_FEAT_DIT``: Numeric value to enable ``FEAT_DIT`` (Data Independent 342 Timing) extension. It allows setting the ``DIT`` bit of PSTATE in EL3. 343 ``FEAT_DIT`` is a mandatory architectural feature and is enabled from v8.4 344 and upwards. This flag can take the values 0 to 2, to align with the 345 ``ENABLE_FEAT`` mechanism. Default value is ``0``. 346 347- ``ENABLE_FEAT_ECV``: Numeric value to enable support for the Enhanced Counter 348 Virtualization feature, allowing for access to the CNTPOFF_EL2 (Counter-timer 349 Physical Offset register) during EL2 to EL3 context save/restore operations. 350 Its a mandatory architectural feature and is enabled from v8.6 and upwards. 351 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 352 mechanism. Default value is ``0``. 353 354- ``ENABLE_FEAT_FPMR``: Numerical value to enable support for Floating Point 355 Mode Register feature, allowing access to the FPMR register. FPMR register 356 controls the behaviors of FP8 instructions. It is an optional architectural 357 feature from v9.2 and upwards. This flag can take value of 0 to 2, to align 358 with the ``FEATURE_DETECTION`` mechanism. Default value is ``0``. 359 360- ``ENABLE_FEAT_FGT``: Numeric value to enable support for FGT (Fine Grain Traps) 361 feature allowing for access to the HDFGRTR_EL2 (Hypervisor Debug Fine-Grained 362 Read Trap Register) during EL2 to EL3 context save/restore operations. 363 Its a mandatory architectural feature and is enabled from v8.6 and upwards. 364 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 365 mechanism. Default value is ``0``. 366 367- ``ENABLE_FEAT_FGT2``: Numeric value to enable support for FGT2 368 (Fine Grain Traps 2) feature allowing for access to Fine-grained trap 2 registers 369 during EL2 to EL3 context save/restore operations. 370 Its an optional architectural feature and is available from v8.8 and upwards. 371 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 372 mechanism. Default value is ``0``. 373 374- ``ENABLE_FEAT_HCX``: Numeric value to set the bit SCR_EL3.HXEn in EL3 to 375 allow access to HCRX_EL2 (extended hypervisor control register) from EL2 as 376 well as adding HCRX_EL2 to the EL2 context save/restore operations. Its a 377 mandatory architectural feature and is enabled from v8.7 and upwards. This 378 flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 379 mechanism. Default value is ``0``. 380 381- ``ENABLE_FEAT_MOPS``: Numeric value to enable FEAT_MOPS (Standardization 382 of memory operations) when INIT_UNUSED_NS_EL2=1. 383 This feature is mandatory from v8.8 and enabling of FEAT_MOPS does not 384 require any settings from EL3 as the controls are present in EL2 registers 385 (HCRX_EL2.{MSCEn,MCE2} and SCTLR_EL2.MSCEn) and in most configurations 386 we expect EL2 to be present. But in case of INIT_UNUSED_NS_EL2=1 , 387 EL3 should configure the EL2 registers. This flag 388 can take values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 389 Default value is ``0``. 390 391- ``ENABLE_FEAT_MTE2``: Numeric value to enable Memory Tagging Extension2 392 if the platform wants to use this feature and MTE2 is enabled at ELX. 393 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 394 mechanism. Default value is ``0``. 395 396- ``ENABLE_FEAT_PAN``: Numeric value to enable the ``FEAT_PAN`` (Privileged 397 Access Never) extension. ``FEAT_PAN`` adds a bit to PSTATE, generating a 398 permission fault for any privileged data access from EL1/EL2 to virtual 399 memory address, accessible at EL0, provided (HCR_EL2.E2H=1). It is a 400 mandatory architectural feature and is enabled from v8.1 and upwards. This 401 flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 402 mechanism. Default value is ``0``. 403 404- ``ENABLE_FEAT_RNG``: Numeric value to enable the ``FEAT_RNG`` extension. 405 ``FEAT_RNG`` is an optional feature available on Arm v8.5 onwards. This 406 flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 407 mechanism. Default value is ``0``. 408 409- ``ENABLE_FEAT_RNG_TRAP``: Numeric value to enable the ``FEAT_RNG_TRAP`` 410 extension. This feature is only supported in AArch64 state. This flag can 411 take values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 412 Default value is ``0``. ``FEAT_RNG_TRAP`` is an optional feature from 413 Armv8.5 onwards. 414 415- ``ENABLE_FEAT_SB``: Boolean option to let the TF-A code use the ``FEAT_SB`` 416 (Speculation Barrier) instruction ``FEAT_SB`` is an optional feature and 417 defaults to ``0`` for pre-Armv8.5 CPUs, but is mandatory for Armv8.5 or 418 later CPUs. It is enabled from v8.5 and upwards and if needed can be 419 overidden from platforms explicitly. 420 421- ``ENABLE_FEAT_SEL2``: Numeric value to enable the ``FEAT_SEL2`` (Secure EL2) 422 extension. ``FEAT_SEL2`` is a mandatory feature available on Arm v8.4. 423 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 424 mechanism. Default is ``0``. 425 426- ``ENABLE_FEAT_TWED``: Numeric value to enable the ``FEAT_TWED`` (Delayed 427 trapping of WFE Instruction) extension. ``FEAT_TWED`` is a optional feature 428 available on Arm v8.6. This flag can take values 0 to 2, to align with the 429 ``ENABLE_FEAT`` mechanism. Default is ``0``. 430 431 When ``ENABLE_FEAT_TWED`` is set to ``1``, WFE instruction trapping gets 432 delayed by the amount of value in ``TWED_DELAY``. 433 434- ``ENABLE_FEAT_VHE``: Numeric value to enable the ``FEAT_VHE`` (Virtualization 435 Host Extensions) extension. It allows access to CONTEXTIDR_EL2 register 436 during EL2 context save/restore operations.``FEAT_VHE`` is a mandatory 437 architectural feature and is enabled from v8.1 and upwards. It can take 438 values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 439 Default value is ``0``. 440 441- ``ENABLE_FEAT_TCR2``: Numeric value to set the bit SCR_EL3.ENTCR2 in EL3 to 442 allow access to TCR2_EL2 (extended translation control) from EL2 as 443 well as adding TCR2_EL2 to the EL2 context save/restore operations. Its a 444 mandatory architectural feature and is enabled from v8.9 and upwards. This 445 flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 446 mechanism. Default value is ``0``. 447 448- ``ENABLE_FEAT_S2PIE``: Numeric value to enable support for FEAT_S2PIE 449 at EL2 and below, and context switch relevant registers. This flag 450 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 451 mechanism. Default value is ``0``. 452 453- ``ENABLE_FEAT_S1PIE``: Numeric value to enable support for FEAT_S1PIE 454 at EL2 and below, and context switch relevant registers. This flag 455 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 456 mechanism. Default value is ``0``. 457 458- ``ENABLE_FEAT_S2POE``: Numeric value to enable support for FEAT_S2POE 459 at EL2 and below, and context switch relevant registers. This flag 460 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 461 mechanism. Default value is ``0``. 462 463- ``ENABLE_FEAT_S1POE``: Numeric value to enable support for FEAT_S1POE 464 at EL2 and below, and context switch relevant registers. This flag 465 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 466 mechanism. Default value is ``0``. 467 468- ``ENABLE_FEAT_GCS``: Numeric value to set the bit SCR_EL3.GCSEn in EL3 to 469 allow use of Guarded Control Stack from EL2 as well as adding the GCS 470 registers to the EL2 context save/restore operations. This flag can take 471 the values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 472 Default value is ``0``. 473 474- ``ENABLE_FEAT_THE``: Numeric value to enable support for FEAT_THE 475 (Translation Hardening Extension) at EL2 and below, setting the bit 476 SCR_EL3.RCWMASKEn in EL3 to allow access to RCWMASK_EL1 and RCWSMASK_EL1 477 registers and context switch them. 478 Its an optional architectural feature and is available from v8.8 and upwards. 479 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 480 mechanism. Default value is ``0``. 481 482- ``ENABLE_FEAT_SCTLR2``: Numeric value to enable support for FEAT_SCTLR2 483 (Extension to SCTLR_ELx) at EL2 and below, setting the bit 484 SCR_EL3.SCTLR2En in EL3 to allow access to SCTLR2_ELx registers and 485 context switch them. This feature is OPTIONAL from Armv8.0 implementations 486 and mandatory in Armv8.9 implementations. 487 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 488 mechanism. Default value is ``0``. 489 490- ``ENABLE_FEAT_D128``: Numeric value to enable support for FEAT_D128 491 at EL2 and below, setting the bit SCT_EL3.D128En in EL3 to allow access to 492 128 bit version of system registers like PAR_EL1, TTBR0_EL1, TTBR1_EL1, 493 TTBR0_EL2, TTBR1_EL2, TTBR0_EL12, TTBR1_EL12 , VTTBR_EL2, RCWMASK_EL1, and 494 RCWSMASK_EL1. Its an optional architectural feature and is available from 495 9.3 and upwards. 496 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 497 mechanism. Default value is ``0``. 498 499- ``ENABLE_LTO``: Boolean option to enable Link Time Optimization (LTO) 500 support in GCC for TF-A. This option is currently only supported for 501 AArch64. Default is 0. 502 503- ``ENABLE_FEAT_MPAM``: Numeric value to enable lower ELs to use MPAM 504 feature. MPAM is an optional Armv8.4 extension that enables various memory 505 system components and resources to define partitions; software running at 506 various ELs can assign themselves to desired partition to control their 507 performance aspects. 508 509 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 510 mechanism. When this option is set to ``1`` or ``2``, EL3 allows lower ELs to 511 access their own MPAM registers without trapping into EL3. This option 512 doesn't make use of partitioning in EL3, however. Platform initialisation 513 code should configure and use partitions in EL3 as required. This option 514 defaults to ``2`` since MPAM is enabled by default for NS world only. 515 The flag is automatically disabled when the target 516 architecture is AArch32. 517 518- ``ENABLE_FEAT_LS64_ACCDATA``: Numeric value to enable access and save and 519 restore the ACCDATA_EL1 system register, at EL2 and below. This flag can 520 take the values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 521 Default value is ``0``. 522 523- ``ENABLE_MPMM``: Boolean option to enable support for the Maximum Power 524 Mitigation Mechanism supported by certain Arm cores, which allows the SoC 525 firmware to detect and limit high activity events to assist in SoC processor 526 power domain dynamic power budgeting and limit the triggering of whole-rail 527 (i.e. clock chopping) responses to overcurrent conditions. Defaults to ``0``. 528 529 - ``FEAT_PABANDON``: Boolean option to enable support for powerdown abandon on 530 Arm cores that support it (currently Gelas and Travis). Extends the PSCI 531 implementation to expect waking up after the terminal ``wfi``. Currently, 532 introduces a performance penalty. Once this is removed, this option will be 533 removed and the feature will be enabled by default. Defaults to ``0``. 534 535- ``ENABLE_MPMM_FCONF``: Enables configuration of MPMM through FCONF, which 536 allows platforms with cores supporting MPMM to describe them via the 537 ``HW_CONFIG`` device tree blob. Default is 0. 538 539- ``ENABLE_PIE``: Boolean option to enable Position Independent Executable(PIE) 540 support within generic code in TF-A. This option is currently only supported 541 in BL2, BL31, and BL32 (TSP) for AARCH64 binaries, and 542 in BL32 (SP_min) for AARCH32. Default is 0. 543 544- ``ENABLE_PMF``: Boolean option to enable support for optional Performance 545 Measurement Framework(PMF). Default is 0. 546 547- ``ENABLE_PSCI_STAT``: Boolean option to enable support for optional PSCI 548 functions ``PSCI_STAT_RESIDENCY`` and ``PSCI_STAT_COUNT``. Default is 0. 549 In the absence of an alternate stat collection backend, ``ENABLE_PMF`` must 550 be enabled. If ``ENABLE_PMF`` is set, the residency statistics are tracked in 551 software. 552 553- ``ENABLE_RUNTIME_INSTRUMENTATION``: Boolean option to enable runtime 554 instrumentation which injects timestamp collection points into TF-A to 555 allow runtime performance to be measured. Currently, only PSCI is 556 instrumented. Enabling this option enables the ``ENABLE_PMF`` build option 557 as well. Default is 0. 558 559- ``ENABLE_SPE_FOR_NS`` : Numeric value to enable Statistical Profiling 560 extensions. This is an optional architectural feature for AArch64. 561 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 562 mechanism. The default is 2 but is automatically disabled when the target 563 architecture is AArch32. 564 565- ``ENABLE_SVE_FOR_NS``: Numeric value to enable Scalable Vector Extension 566 (SVE) for the Non-secure world only. SVE is an optional architectural feature 567 for AArch64. This flag can take the values 0 to 2, to align with the 568 ``ENABLE_FEAT`` mechanism. At this time, this build option cannot be used on 569 systems that have SPM_MM enabled. The default value is 2. 570 571 Note that when SVE is enabled for the Non-secure world, access 572 to SVE, SIMD and floating-point functionality from the Secure world is 573 independently controlled by build option ``ENABLE_SVE_FOR_SWD``. When enabling 574 ``CTX_INCLUDE_FPREGS`` and ``ENABLE_SVE_FOR_NS`` together, it is mandatory to 575 enable ``CTX_INCLUDE_SVE_REGS``. This is to avoid corruption of the Non-secure 576 world data in the Z-registers which are aliased by the SIMD and FP registers. 577 578- ``ENABLE_SVE_FOR_SWD``: Boolean option to enable SVE and FPU/SIMD functionality 579 for the Secure world. SVE is an optional architectural feature for AArch64. 580 The default is 0 and it is automatically disabled when the target architecture 581 is AArch32. 582 583 .. note:: 584 This build flag requires ``ENABLE_SVE_FOR_NS`` to be enabled. When enabling 585 ``ENABLE_SVE_FOR_SWD``, a developer must carefully consider whether 586 ``CTX_INCLUDE_SVE_REGS`` is also needed. 587 588- ``ENABLE_STACK_PROTECTOR``: String option to enable the stack protection 589 checks in GCC. Allowed values are "all", "strong", "default" and "none". The 590 default value is set to "none". "strong" is the recommended stack protection 591 level if this feature is desired. "none" disables the stack protection. For 592 all values other than "none", the ``plat_get_stack_protector_canary()`` 593 platform hook needs to be implemented. The value is passed as the last 594 component of the option ``-fstack-protector-$ENABLE_STACK_PROTECTOR``. 595 596- ``ENCRYPT_BL31``: Binary flag to enable encryption of BL31 firmware. This 597 flag depends on ``DECRYPTION_SUPPORT`` build flag. 598 599- ``ENCRYPT_BL32``: Binary flag to enable encryption of Secure BL32 payload. 600 This flag depends on ``DECRYPTION_SUPPORT`` build flag. 601 602- ``ENC_KEY``: A 32-byte (256-bit) symmetric key in hex string format. It could 603 either be SSK or BSSK depending on ``FW_ENC_STATUS`` flag. This value depends 604 on ``DECRYPTION_SUPPORT`` build flag. 605 606- ``ENC_NONCE``: A 12-byte (96-bit) encryption nonce or Initialization Vector 607 (IV) in hex string format. This value depends on ``DECRYPTION_SUPPORT`` 608 build flag. 609 610- ``ERROR_DEPRECATED``: This option decides whether to treat the usage of 611 deprecated platform APIs, helper functions or drivers within Trusted 612 Firmware as error. It can take the value 1 (flag the use of deprecated 613 APIs as error) or 0. The default is 0. 614 615- ``ETHOSN_NPU_DRIVER``: boolean option to enable a SiP service that can 616 configure an Arm® Ethos™-N NPU. To use this service the target platform's 617 ``HW_CONFIG`` must include the device tree nodes for the NPU. Currently, only 618 the Arm Juno platform has this included in its ``HW_CONFIG`` and the platform 619 only loads the ``HW_CONFIG`` in AArch64 builds. Default is 0. 620 621- ``ETHOSN_NPU_TZMP1``: boolean option to enable TZMP1 support for the 622 Arm® Ethos™-N NPU. Requires ``ETHOSN_NPU_DRIVER`` and 623 ``TRUSTED_BOARD_BOOT`` to be enabled. 624 625- ``ETHOSN_NPU_FW``: location of the NPU firmware binary 626 (```ethosn.bin```). This firmware image will be included in the FIP and 627 loaded at runtime. 628 629- ``EL3_EXCEPTION_HANDLING``: When set to ``1``, enable handling of exceptions 630 targeted at EL3. When set ``0`` (default), no exceptions are expected or 631 handled at EL3, and a panic will result. The exception to this rule is when 632 ``SPMD_SPM_AT_SEL2`` is set to ``1``, in which case, only exceptions 633 occuring during normal world execution, are trapped to EL3. Any exception 634 trapped during secure world execution are trapped to the SPMC. This is 635 supported only for AArch64 builds. 636 637- ``EVENT_LOG_LEVEL``: Chooses the log level to use for Measured Boot when 638 ``MEASURED_BOOT`` is enabled. For a list of valid values, see ``LOG_LEVEL``. 639 Default value is 40 (LOG_LEVEL_INFO). 640 641- ``FAULT_INJECTION_SUPPORT``: ARMv8.4 extensions introduced support for fault 642 injection from lower ELs, and this build option enables lower ELs to use 643 Error Records accessed via System Registers to inject faults. This is 644 applicable only to AArch64 builds. 645 646 This feature is intended for testing purposes only, and is advisable to keep 647 disabled for production images. 648 649- ``FIP_NAME``: This is an optional build option which specifies the FIP 650 filename for the ``fip`` target. Default is ``fip.bin``. 651 652- ``FWU_FIP_NAME``: This is an optional build option which specifies the FWU 653 FIP filename for the ``fwu_fip`` target. Default is ``fwu_fip.bin``. 654 655- ``FW_ENC_STATUS``: Top level firmware's encryption numeric flag, values: 656 657 :: 658 659 0: Encryption is done with Secret Symmetric Key (SSK) which is common 660 for a class of devices. 661 1: Encryption is done with Binding Secret Symmetric Key (BSSK) which is 662 unique per device. 663 664 This flag depends on ``DECRYPTION_SUPPORT`` build flag. 665 666- ``GENERATE_COT``: Boolean flag used to build and execute the ``cert_create`` 667 tool to create certificates as per the Chain of Trust described in 668 :ref:`Trusted Board Boot`. The build system then calls ``fiptool`` to 669 include the certificates in the FIP and FWU_FIP. Default value is '0'. 670 671 Specify both ``TRUSTED_BOARD_BOOT=1`` and ``GENERATE_COT=1`` to include support 672 for the Trusted Board Boot feature in the BL1 and BL2 images, to generate 673 the corresponding certificates, and to include those certificates in the 674 FIP and FWU_FIP. 675 676 Note that if ``TRUSTED_BOARD_BOOT=0`` and ``GENERATE_COT=1``, the BL1 and BL2 677 images will not include support for Trusted Board Boot. The FIP will still 678 include the corresponding certificates. This FIP can be used to verify the 679 Chain of Trust on the host machine through other mechanisms. 680 681 Note that if ``TRUSTED_BOARD_BOOT=1`` and ``GENERATE_COT=0``, the BL1 and BL2 682 images will include support for Trusted Board Boot, but the FIP and FWU_FIP 683 will not include the corresponding certificates, causing a boot failure. 684 685- ``GICV2_G0_FOR_EL3``: Unlike GICv3, the GICv2 architecture doesn't have 686 inherent support for specific EL3 type interrupts. Setting this build option 687 to ``1`` assumes GICv2 *Group 0* interrupts are expected to target EL3, both 688 by :ref:`platform abstraction layer<platform Interrupt Controller API>` and 689 :ref:`Interrupt Management Framework<Interrupt Management Framework>`. 690 This allows GICv2 platforms to enable features requiring EL3 interrupt type. 691 This also means that all GICv2 Group 0 interrupts are delivered to EL3, and 692 the Secure Payload interrupts needs to be synchronously handed over to Secure 693 EL1 for handling. The default value of this option is ``0``, which means the 694 Group 0 interrupts are assumed to be handled by Secure EL1. 695 696- ``HANDLE_EA_EL3_FIRST_NS``: When set to ``1``, External Aborts and SError 697 Interrupts, resulting from errors in NS world, will be always trapped in 698 EL3 i.e. in BL31 at runtime. When set to ``0`` (default), these exceptions 699 will be trapped in the current exception level (or in EL1 if the current 700 exception level is EL0). 701 702- ``HW_ASSISTED_COHERENCY``: On most Arm systems to-date, platform-specific 703 software operations are required for CPUs to enter and exit coherency. 704 However, newer systems exist where CPUs' entry to and exit from coherency 705 is managed in hardware. Such systems require software to only initiate these 706 operations, and the rest is managed in hardware, minimizing active software 707 management. In such systems, this boolean option enables TF-A to carry out 708 build and run-time optimizations during boot and power management operations. 709 This option defaults to 0 and if it is enabled, then it implies 710 ``WARMBOOT_ENABLE_DCACHE_EARLY`` is also enabled. 711 712 If this flag is disabled while the platform which TF-A is compiled for 713 includes cores that manage coherency in hardware, then a compilation error is 714 generated. This is based on the fact that a system cannot have, at the same 715 time, cores that manage coherency in hardware and cores that don't. In other 716 words, a platform cannot have, at the same time, cores that require 717 ``HW_ASSISTED_COHERENCY=1`` and cores that require 718 ``HW_ASSISTED_COHERENCY=0``. 719 720 Note that, when ``HW_ASSISTED_COHERENCY`` is enabled, version 2 of 721 translation library (xlat tables v2) must be used; version 1 of translation 722 library is not supported. 723 724- ``IMPDEF_SYSREG_TRAP``: Numeric value to enable the handling traps for 725 implementation defined system register accesses from lower ELs. Default 726 value is ``0``. 727 728- ``INVERTED_MEMMAP``: memmap tool print by default lower addresses at the 729 bottom, higher addresses at the top. This build flag can be set to '1' to 730 invert this behavior. Lower addresses will be printed at the top and higher 731 addresses at the bottom. 732 733- ``INIT_UNUSED_NS_EL2``: This build flag guards code that disables EL2 734 safely in scenario where NS-EL2 is present but unused. This flag is set to 0 735 by default. Platforms without NS-EL2 in use must enable this flag. 736 737- ``KEY_ALG``: This build flag enables the user to select the algorithm to be 738 used for generating the PKCS keys and subsequent signing of the certificate. 739 It accepts 5 values: ``rsa``, ``rsa_1_5``, ``ecdsa``, ``ecdsa-brainpool-regular`` 740 and ``ecdsa-brainpool-twisted``. The option ``rsa_1_5`` is the legacy PKCS#1 741 RSA 1.5 algorithm which is not TBBR compliant and is retained only for 742 compatibility. The default value of this flag is ``rsa`` which is the TBBR 743 compliant PKCS#1 RSA 2.1 scheme. 744 745- ``KEY_SIZE``: This build flag enables the user to select the key size for 746 the algorithm specified by ``KEY_ALG``. The valid values for ``KEY_SIZE`` 747 depend on the chosen algorithm and the cryptographic module. 748 749 +---------------------------+------------------------------------+ 750 | KEY_ALG | Possible key sizes | 751 +===========================+====================================+ 752 | rsa | 1024 , 2048 (default), 3072, 4096 | 753 +---------------------------+------------------------------------+ 754 | ecdsa | 256 (default), 384 | 755 +---------------------------+------------------------------------+ 756 | ecdsa-brainpool-regular | 256 (default) | 757 +---------------------------+------------------------------------+ 758 | ecdsa-brainpool-twisted | 256 (default) | 759 +---------------------------+------------------------------------+ 760 761- ``HASH_ALG``: This build flag enables the user to select the secure hash 762 algorithm. It accepts 3 values: ``sha256``, ``sha384`` and ``sha512``. 763 The default value of this flag is ``sha256``. 764 765- ``LDFLAGS``: Extra user options appended to the linkers' command line in 766 addition to the one set by the build system. 767 768- ``LOG_LEVEL``: Chooses the log level, which controls the amount of console log 769 output compiled into the build. This should be one of the following: 770 771 :: 772 773 0 (LOG_LEVEL_NONE) 774 10 (LOG_LEVEL_ERROR) 775 20 (LOG_LEVEL_NOTICE) 776 30 (LOG_LEVEL_WARNING) 777 40 (LOG_LEVEL_INFO) 778 50 (LOG_LEVEL_VERBOSE) 779 780 All log output up to and including the selected log level is compiled into 781 the build. The default value is 40 in debug builds and 20 in release builds. 782 783- ``MEASURED_BOOT``: Boolean flag to include support for the Measured Boot 784 feature. This flag can be enabled with ``TRUSTED_BOARD_BOOT`` in order to 785 provide trust that the code taking the measurements and recording them has 786 not been tampered with. 787 788 This option defaults to 0. 789 790- ``MARCH_DIRECTIVE``: used to pass a -march option from the platform build 791 options to the compiler. An example usage: 792 793 .. code:: make 794 795 MARCH_DIRECTIVE := -march=armv8.5-a 796 797- ``HARDEN_SLS``: used to pass -mharden-sls=all from the TF-A build 798 options to the compiler currently supporting only of the options. 799 GCC documentation: 800 https://gcc.gnu.org/onlinedocs/gcc/AArch64-Options.html#index-mharden-sls 801 802 An example usage: 803 804 .. code:: make 805 806 HARDEN_SLS := 1 807 808 This option defaults to 0. 809 810- ``NON_TRUSTED_WORLD_KEY``: This option is used when ``GENERATE_COT=1``. It 811 specifies a file that contains the Non-Trusted World private key in PEM 812 format or a PKCS11 URI. If ``SAVE_KEYS=1``, only a file is accepted and it 813 will be used to save the key. 814 815- ``NS_BL2U``: Path to NS_BL2U image in the host file system. This image is 816 optional. It is only needed if the platform makefile specifies that it 817 is required in order to build the ``fwu_fip`` target. 818 819- ``NS_TIMER_SWITCH``: Enable save and restore for non-secure timer register 820 contents upon world switch. It can take either 0 (don't save and restore) or 821 1 (do save and restore). 0 is the default. An SPD may set this to 1 if it 822 wants the timer registers to be saved and restored. 823 824- ``OVERRIDE_LIBC``: This option allows platforms to override the default libc 825 for the BL image. It can be either 0 (include) or 1 (remove). The default 826 value is 0. 827 828- ``PL011_GENERIC_UART``: Boolean option to indicate the PL011 driver that 829 the underlying hardware is not a full PL011 UART but a minimally compliant 830 generic UART, which is a subset of the PL011. The driver will not access 831 any register that is not part of the SBSA generic UART specification. 832 Default value is 0 (a full PL011 compliant UART is present). 833 834- ``PLAT``: Choose a platform to build TF-A for. The chosen platform name 835 must be subdirectory of any depth under ``plat/``, and must contain a 836 platform makefile named ``platform.mk``. For example, to build TF-A for the 837 Arm Juno board, select PLAT=juno. 838 839- ``PLATFORM_REPORT_CTX_MEM_USE``: Reports the context memory allocated for 840 each core as well as the global context. The data includes the memory used 841 by each world and each privileged exception level. This build option is 842 applicable only for ``ARCH=aarch64`` builds. The default value is 0. 843 844- ``PRELOADED_BL33_BASE``: This option enables booting a preloaded BL33 image 845 instead of the normal boot flow. When defined, it must specify the entry 846 point address for the preloaded BL33 image. This option is incompatible with 847 ``EL3_PAYLOAD_BASE``. If both are defined, ``EL3_PAYLOAD_BASE`` has priority 848 over ``PRELOADED_BL33_BASE``. 849 850- ``PRESERVE_DSU_PMU_REGS``: This options when enabled allows the platform to 851 save/restore the DynamIQ Shared Unit's(DSU) Performance Monitoring Unit(PMU) 852 registers when the cluster goes through a power cycle. This is disabled by 853 default and platforms that require this feature have to enable them. 854 855- ``PROGRAMMABLE_RESET_ADDRESS``: This option indicates whether the reset 856 vector address can be programmed or is fixed on the platform. It can take 857 either 0 (fixed) or 1 (programmable). Default is 0. If the platform has a 858 programmable reset address, it is expected that a CPU will start executing 859 code directly at the right address, both on a cold and warm reset. In this 860 case, there is no need to identify the entrypoint on boot and the boot path 861 can be optimised. The ``plat_get_my_entrypoint()`` platform porting interface 862 does not need to be implemented in this case. 863 864- ``PSCI_EXTENDED_STATE_ID``: As per PSCI1.0 Specification, there are 2 formats 865 possible for the PSCI power-state parameter: original and extended State-ID 866 formats. This flag if set to 1, configures the generic PSCI layer to use the 867 extended format. The default value of this flag is 0, which means by default 868 the original power-state format is used by the PSCI implementation. This flag 869 should be specified by the platform makefile and it governs the return value 870 of PSCI_FEATURES API for CPU_SUSPEND smc function id. When this option is 871 enabled on Arm platforms, the option ``ARM_RECOM_STATE_ID_ENC`` needs to be 872 set to 1 as well. 873 874- ``PSCI_OS_INIT_MODE``: Boolean flag to enable support for optional PSCI 875 OS-initiated mode. This option defaults to 0. 876 877- ``ARCH_FEATURE_AVAILABILITY``: Boolean flag to enable support for the 878 optional SMCCC_ARCH_FEATURE_AVAILABILITY call. This option implicitly 879 interacts with IMPDEF_SYSREG_TRAP and software emulation. This option 880 defaults to 0. 881 882- ``ENABLE_FEAT_RAS``: Boolean flag to enable Armv8.2 RAS features. RAS features 883 are an optional extension for pre-Armv8.2 CPUs, but are mandatory for Armv8.2 884 or later CPUs. This flag can take the values 0 or 1. The default value is 0. 885 NOTE: This flag enables use of IESB capability to reduce entry latency into 886 EL3 even when RAS error handling is not performed on the platform. Hence this 887 flag is recommended to be turned on Armv8.2 and later CPUs. 888 889- ``RESET_TO_BL31``: Enable BL31 entrypoint as the CPU reset vector instead 890 of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 891 entrypoint) or 1 (CPU reset to BL31 entrypoint). 892 The default value is 0. 893 894- ``RESET_TO_SP_MIN``: SP_MIN is the minimal AArch32 Secure Payload provided 895 in TF-A. This flag configures SP_MIN entrypoint as the CPU reset vector 896 instead of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 897 entrypoint) or 1 (CPU reset to SP_MIN entrypoint). The default value is 0. 898 899- ``RME_GPT_BITLOCK_BLOCK``: This defines the block size (in number of 512MB 900- blocks) covered by a single bit of the bitlock structure during RME GPT 901- operations. The lower the block size, the better opportunity for 902- parallelising GPT operations but at the cost of more bits being needed 903- for the bitlock structure. This numeric parameter can take the values 904- from 0 to 512 and must be a power of 2. The value of 0 is special and 905- and it chooses a single spinlock for all GPT L1 table entries. Default 906- value is 1 which corresponds to block size of 512MB per bit of bitlock 907- structure. 908 909- ``RME_GPT_MAX_BLOCK``: Numeric value in MB to define the maximum size of 910 supported contiguous blocks in GPT Library. This parameter can take the 911 values 0, 2, 32 and 512. Setting this value to 0 disables use of Contigious 912 descriptors. Default value is 512. 913 914- ``ROT_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 915 file that contains the ROT private key in PEM format or a PKCS11 URI and 916 enforces public key hash generation. If ``SAVE_KEYS=1``, only a file is 917 accepted and it will be used to save the key. 918 919- ``SAVE_KEYS``: This option is used when ``GENERATE_COT=1``. It tells the 920 certificate generation tool to save the keys used to establish the Chain of 921 Trust. Allowed options are '0' or '1'. Default is '0' (do not save). 922 923- ``SCP_BL2``: Path to SCP_BL2 image in the host file system. This image is optional. 924 If a SCP_BL2 image is present then this option must be passed for the ``fip`` 925 target. 926 927- ``SCP_BL2_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 928 file that contains the SCP_BL2 private key in PEM format or a PKCS11 URI. 929 If ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 930 931- ``SCP_BL2U``: Path to SCP_BL2U image in the host file system. This image is 932 optional. It is only needed if the platform makefile specifies that it 933 is required in order to build the ``fwu_fip`` target. 934 935- ``SDEI_SUPPORT``: Setting this to ``1`` enables support for Software 936 Delegated Exception Interface to BL31 image. This defaults to ``0``. 937 938 When set to ``1``, the build option ``EL3_EXCEPTION_HANDLING`` must also be 939 set to ``1``. 940 941- ``SEPARATE_CODE_AND_RODATA``: Whether code and read-only data should be 942 isolated on separate memory pages. This is a trade-off between security and 943 memory usage. See "Isolating code and read-only data on separate memory 944 pages" section in :ref:`Firmware Design`. This flag is disabled by default 945 and affects all BL images. 946 947- ``SEPARATE_NOBITS_REGION``: Setting this option to ``1`` allows the NOBITS 948 sections of BL31 (.bss, stacks, page tables, and coherent memory) to be 949 allocated in RAM discontiguous from the loaded firmware image. When set, the 950 platform is expected to provide definitions for ``BL31_NOBITS_BASE`` and 951 ``BL31_NOBITS_LIMIT``. When the option is ``0`` (the default), NOBITS 952 sections are placed in RAM immediately following the loaded firmware image. 953 954- ``SEPARATE_BL2_NOLOAD_REGION``: Setting this option to ``1`` allows the 955 NOLOAD sections of BL2 (.bss, stacks, page tables) to be allocated in RAM 956 discontiguous from loaded firmware images. When set, the platform need to 957 provide definitions of ``BL2_NOLOAD_START`` and ``BL2_NOLOAD_LIMIT``. This 958 flag is disabled by default and NOLOAD sections are placed in RAM immediately 959 following the loaded firmware image. 960 961- ``SEPARATE_SIMD_SECTION``: Setting this option to ``1`` allows the SIMD context 962 data structures to be put in a dedicated memory region as decided by platform 963 integrator. Default value is ``0`` which means the SIMD context is put in BSS 964 section of EL3 firmware. 965 966- ``SMC_PCI_SUPPORT``: This option allows platforms to handle PCI configuration 967 access requests via a standard SMCCC defined in `DEN0115`_. When combined with 968 UEFI+ACPI this can provide a certain amount of OS forward compatibility 969 with newer platforms that aren't ECAM compliant. 970 971- ``SPD``: Choose a Secure Payload Dispatcher component to be built into TF-A. 972 This build option is only valid if ``ARCH=aarch64``. The value should be 973 the path to the directory containing the SPD source, relative to 974 ``services/spd/``; the directory is expected to contain a makefile called 975 ``<spd-value>.mk``. The SPM Dispatcher standard service is located in 976 services/std_svc/spmd and enabled by ``SPD=spmd``. The SPM Dispatcher 977 cannot be enabled when the ``SPM_MM`` option is enabled. 978 979- ``SPIN_ON_BL1_EXIT``: This option introduces an infinite loop in BL1. It can 980 take either 0 (no loop) or 1 (add a loop). 0 is the default. This loop stops 981 execution in BL1 just before handing over to BL31. At this point, all 982 firmware images have been loaded in memory, and the MMU and caches are 983 turned off. Refer to the "Debugging options" section for more details. 984 985- ``SPMC_AT_EL3`` : This boolean option is used jointly with the SPM 986 Dispatcher option (``SPD=spmd``). When enabled (1) it indicates the SPMC 987 component runs at the EL3 exception level. The default value is ``0`` ( 988 disabled). This configuration supports pre-Armv8.4 platforms (aka not 989 implementing the ``FEAT_SEL2`` extension). 990 991- ``SPMC_AT_EL3_SEL0_SP`` : Boolean option to enable SEL0 SP load support when 992 ``SPMC_AT_EL3`` is enabled. The default value if ``0`` (disabled). This 993 option cannot be enabled (``1``) when (``SPMC_AT_EL3``) is disabled. 994 995- ``SPMC_OPTEE`` : This boolean option is used jointly with the SPM 996 Dispatcher option (``SPD=spmd``) and with ``SPMD_SPM_AT_SEL2=0`` to 997 indicate that the SPMC at S-EL1 is OP-TEE and an OP-TEE specific loading 998 mechanism should be used. 999 1000- ``SPMD_SPM_AT_SEL2`` : This boolean option is used jointly with the SPM 1001 Dispatcher option (``SPD=spmd``). When enabled (1) it indicates the SPMC 1002 component runs at the S-EL2 exception level provided by the ``FEAT_SEL2`` 1003 extension. This is the default when enabling the SPM Dispatcher. When 1004 disabled (0) it indicates the SPMC component runs at the S-EL1 execution 1005 state or at EL3 if ``SPMC_AT_EL3`` is enabled. The latter configurations 1006 support pre-Armv8.4 platforms (aka not implementing the ``FEAT_SEL2`` 1007 extension). 1008 1009- ``SPM_MM`` : Boolean option to enable the Management Mode (MM)-based Secure 1010 Partition Manager (SPM) implementation. The default value is ``0`` 1011 (disabled). This option cannot be enabled (``1``) when SPM Dispatcher is 1012 enabled (``SPD=spmd``). 1013 1014- ``SP_LAYOUT_FILE``: Platform provided path to JSON file containing the 1015 description of secure partitions. The build system will parse this file and 1016 package all secure partition blobs into the FIP. This file is not 1017 necessarily part of TF-A tree. Only available when ``SPD=spmd``. 1018 1019- ``SP_MIN_WITH_SECURE_FIQ``: Boolean flag to indicate the SP_MIN handles 1020 secure interrupts (caught through the FIQ line). Platforms can enable 1021 this directive if they need to handle such interruption. When enabled, 1022 the FIQ are handled in monitor mode and non secure world is not allowed 1023 to mask these events. Platforms that enable FIQ handling in SP_MIN shall 1024 implement the api ``sp_min_plat_fiq_handler()``. The default value is 0. 1025 1026- ``SVE_VECTOR_LEN``: SVE vector length to configure in ZCR_EL3. 1027 Platforms can configure this if they need to lower the hardware 1028 limit, for example due to asymmetric configuration or limitations of 1029 software run at lower ELs. The default is the architectural maximum 1030 of 2048 which should be suitable for most configurations, the 1031 hardware will limit the effective VL to the maximum physically supported 1032 VL. 1033 1034- ``TRNG_SUPPORT``: Setting this to ``1`` enables support for True 1035 Random Number Generator Interface to BL31 image. This defaults to ``0``. 1036 1037- ``TRUSTED_BOARD_BOOT``: Boolean flag to include support for the Trusted Board 1038 Boot feature. When set to '1', BL1 and BL2 images include support to load 1039 and verify the certificates and images in a FIP, and BL1 includes support 1040 for the Firmware Update. The default value is '0'. Generation and inclusion 1041 of certificates in the FIP and FWU_FIP depends upon the value of the 1042 ``GENERATE_COT`` option. 1043 1044 .. warning:: 1045 This option depends on ``CREATE_KEYS`` to be enabled. If the keys 1046 already exist in disk, they will be overwritten without further notice. 1047 1048- ``TRUSTED_WORLD_KEY``: This option is used when ``GENERATE_COT=1``. It 1049 specifies a file that contains the Trusted World private key in PEM 1050 format or a PKCS11 URI. If ``SAVE_KEYS=1``, only a file is accepted and 1051 it will be used to save the key. 1052 1053- ``TSP_INIT_ASYNC``: Choose BL32 initialization method as asynchronous or 1054 synchronous, (see "Initializing a BL32 Image" section in 1055 :ref:`Firmware Design`). It can take the value 0 (BL32 is initialized using 1056 synchronous method) or 1 (BL32 is initialized using asynchronous method). 1057 Default is 0. 1058 1059- ``TSP_NS_INTR_ASYNC_PREEMPT``: A non zero value enables the interrupt 1060 routing model which routes non-secure interrupts asynchronously from TSP 1061 to EL3 causing immediate preemption of TSP. The EL3 is responsible 1062 for saving and restoring the TSP context in this routing model. The 1063 default routing model (when the value is 0) is to route non-secure 1064 interrupts to TSP allowing it to save its context and hand over 1065 synchronously to EL3 via an SMC. 1066 1067 .. note:: 1068 When ``EL3_EXCEPTION_HANDLING`` is ``1``, ``TSP_NS_INTR_ASYNC_PREEMPT`` 1069 must also be set to ``1``. 1070 1071- ``TS_SP_FW_CONFIG``: DTC build flag to include Trusted Services (Crypto and 1072 internal-trusted-storage) as SP in tb_fw_config device tree. 1073 1074- ``TWED_DELAY``: Numeric value to be set in order to delay the trapping of 1075 WFE instruction. ``ENABLE_FEAT_TWED`` build option must be enabled to set 1076 this delay. It can take values in the range (0-15). Default value is ``0`` 1077 and based on this value, 2^(TWED_DELAY + 8) cycles will be delayed. 1078 Platforms need to explicitly update this value based on their requirements. 1079 1080- ``USE_ARM_LINK``: This flag determines whether to enable support for ARM 1081 linker. When the ``LINKER`` build variable points to the armlink linker, 1082 this flag is enabled automatically. To enable support for armlink, platforms 1083 will have to provide a scatter file for the BL image. Currently, Tegra 1084 platforms use the armlink support to compile BL3-1 images. 1085 1086- ``USE_COHERENT_MEM``: This flag determines whether to include the coherent 1087 memory region in the BL memory map or not (see "Use of Coherent memory in 1088 TF-A" section in :ref:`Firmware Design`). It can take the value 1 1089 (Coherent memory region is included) or 0 (Coherent memory region is 1090 excluded). Default is 1. 1091 1092- ``ARM_IO_IN_DTB``: This flag determines whether to use IO based on the 1093 firmware configuration framework. This will move the io_policies into a 1094 configuration device tree, instead of static structure in the code base. 1095 1096- ``COT_DESC_IN_DTB``: This flag determines whether to create COT descriptors 1097 at runtime using fconf. If this flag is enabled, COT descriptors are 1098 statically captured in tb_fw_config file in the form of device tree nodes 1099 and properties. Currently, COT descriptors used by BL2 are moved to the 1100 device tree and COT descriptors used by BL1 are retained in the code 1101 base statically. 1102 1103- ``SDEI_IN_FCONF``: This flag determines whether to configure SDEI setup in 1104 runtime using firmware configuration framework. The platform specific SDEI 1105 shared and private events configuration is retrieved from device tree rather 1106 than static C structures at compile time. This is only supported if 1107 SDEI_SUPPORT build flag is enabled. 1108 1109- ``SEC_INT_DESC_IN_FCONF``: This flag determines whether to configure Group 0 1110 and Group1 secure interrupts using the firmware configuration framework. The 1111 platform specific secure interrupt property descriptor is retrieved from 1112 device tree in runtime rather than depending on static C structure at compile 1113 time. 1114 1115- ``USE_ROMLIB``: This flag determines whether library at ROM will be used. 1116 This feature creates a library of functions to be placed in ROM and thus 1117 reduces SRAM usage. Refer to :ref:`Library at ROM` for further details. Default 1118 is 0. 1119 1120- ``V``: Verbose build. If assigned anything other than 0, the build commands 1121 are printed. Default is 0. 1122 1123- ``VERSION_STRING``: String used in the log output for each TF-A image. 1124 Defaults to a string formed by concatenating the version number, build type 1125 and build string. 1126 1127- ``W``: Warning level. Some compiler warning options of interest have been 1128 regrouped and put in the root Makefile. This flag can take the values 0 to 3, 1129 each level enabling more warning options. Default is 0. 1130 1131 This option is closely related to the ``E`` option, which enables 1132 ``-Werror``. 1133 1134 - ``W=0`` (default) 1135 1136 Enables a wide assortment of warnings, most notably ``-Wall`` and 1137 ``-Wextra``, as well as various bad practices and things that are likely to 1138 result in errors. Includes some compiler specific flags. No warnings are 1139 expected at this level for any build. 1140 1141 - ``W=1`` 1142 1143 Enables warnings we want the generic build to include but are too time 1144 consuming to fix at the moment. It re-enables warnings taken out for 1145 ``W=0`` builds (a few of the ``-Wextra`` additions). This level is expected 1146 to eventually be merged into ``W=0``. Some warnings are expected on some 1147 builds, but new contributions should not introduce new ones. 1148 1149 - ``W=2`` (recommended) 1150 1151 Enables warnings we want the generic build to include but cannot be enabled 1152 due to external libraries. This level is expected to eventually be merged 1153 into ``W=0``. Lots of warnings are expected, primarily from external 1154 libraries like zlib and compiler-rt, but new controbutions should not 1155 introduce new ones. 1156 1157 - ``W=3`` 1158 1159 Enables warnings that are informative but not necessary and generally too 1160 verbose and frequently ignored. A very large number of warnings are 1161 expected. 1162 1163 The exact set of warning flags depends on the compiler and TF-A warning 1164 level, however they are all succinctly set in the top-level Makefile. Please 1165 refer to the `GCC`_ or `Clang`_ documentation for more information on the 1166 individual flags. 1167 1168- ``WARMBOOT_ENABLE_DCACHE_EARLY`` : Boolean option to enable D-cache early on 1169 the CPU after warm boot. This is applicable for platforms which do not 1170 require interconnect programming to enable cache coherency (eg: single 1171 cluster platforms). If this option is enabled, then warm boot path 1172 enables D-caches immediately after enabling MMU. This option defaults to 0. 1173 1174- ``SUPPORT_STACK_MEMTAG``: This flag determines whether to enable memory 1175 tagging for stack or not. It accepts 2 values: ``yes`` and ``no``. The 1176 default value of this flag is ``no``. Note this option must be enabled only 1177 for ARM architecture greater than Armv8.5-A. 1178 1179- ``ERRATA_SPECULATIVE_AT``: This flag determines whether to enable ``AT`` 1180 speculative errata workaround or not. It accepts 2 values: ``1`` and ``0``. 1181 The default value of this flag is ``0``. 1182 1183 ``AT`` speculative errata workaround disables stage1 page table walk for 1184 lower ELs (EL1 and EL0) in EL3 so that ``AT`` speculative fetch at any point 1185 produces either the correct result or failure without TLB allocation. 1186 1187 This boolean option enables errata for all below CPUs. 1188 1189 +---------+--------------+-------------------------+ 1190 | Errata | CPU | Workaround Define | 1191 +=========+==============+=========================+ 1192 | 1165522 | Cortex-A76 | ``ERRATA_A76_1165522`` | 1193 +---------+--------------+-------------------------+ 1194 | 1319367 | Cortex-A72 | ``ERRATA_A72_1319367`` | 1195 +---------+--------------+-------------------------+ 1196 | 1319537 | Cortex-A57 | ``ERRATA_A57_1319537`` | 1197 +---------+--------------+-------------------------+ 1198 | 1530923 | Cortex-A55 | ``ERRATA_A55_1530923`` | 1199 +---------+--------------+-------------------------+ 1200 | 1530924 | Cortex-A53 | ``ERRATA_A53_1530924`` | 1201 +---------+--------------+-------------------------+ 1202 1203 .. note:: 1204 This option is enabled by build only if platform sets any of above defines 1205 mentioned in ’Workaround Define' column in the table. 1206 If this option is enabled for the EL3 software then EL2 software also must 1207 implement this workaround due to the behaviour of the errata mentioned 1208 in new SDEN document which will get published soon. 1209 1210- ``ERRATA_SME_POWER_DOWN``: Boolean option to disable SME (PSTATE.{ZA,SM}=0) 1211 before power down and downgrade a suspend to power down request to a normal 1212 suspend request. This is necessary when software running at lower ELs requests 1213 power down without first clearing these bits. On affected cores, the CME 1214 connected to it will reject its power down request. The default value is 0. 1215 1216- ``RAS_TRAP_NS_ERR_REC_ACCESS``: This flag enables/disables the SCR_EL3.TERR 1217 bit, to trap access to the RAS ERR and RAS ERX registers from lower ELs. 1218 This flag is disabled by default. 1219 1220- ``OPENSSL_DIR``: This option is used to provide the path to a directory on the 1221 host machine where a custom installation of OpenSSL is located, which is used 1222 to build the certificate generation, firmware encryption and FIP tools. If 1223 this option is not set, the default OS installation will be used. 1224 1225- ``USE_SP804_TIMER``: Use the SP804 timer instead of the Generic Timer for 1226 functions that wait for an arbitrary time length (udelay and mdelay). The 1227 default value is 0. 1228 1229- ``ENABLE_BRBE_FOR_NS``: Numeric value to enable access to the branch record 1230 buffer registers from NS ELs when FEAT_BRBE is implemented. BRBE is an 1231 optional architectural feature for AArch64. This flag can take the values 1232 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. The default is 0 1233 and it is automatically disabled when the target architecture is AArch32. 1234 1235- ``ENABLE_TRBE_FOR_NS``: Numeric value to enable access of trace buffer 1236 control registers from NS ELs, NS-EL2 or NS-EL1(when NS-EL2 is implemented 1237 but unused) when FEAT_TRBE is implemented. TRBE is an optional architectural 1238 feature for AArch64. This flag can take the values 0 to 2, to align with the 1239 ``ENABLE_FEAT`` mechanism. The default is 0 and it is automatically 1240 disabled when the target architecture is AArch32. 1241 1242- ``ENABLE_SYS_REG_TRACE_FOR_NS``: Numeric value to enable trace system 1243 registers access from NS ELs, NS-EL2 or NS-EL1 (when NS-EL2 is implemented 1244 but unused). This feature is available if trace unit such as ETMv4.x, and 1245 ETE(extending ETM feature) is implemented. This flag can take the values 1246 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. The default is 0. 1247 1248- ``ENABLE_TRF_FOR_NS``: Numeric value to enable trace filter control registers 1249 access from NS ELs, NS-EL2 or NS-EL1 (when NS-EL2 is implemented but unused), 1250 if FEAT_TRF is implemented. This flag can take the values 0 to 2, to align 1251 with the ``ENABLE_FEAT`` mechanism. This flag is disabled by default. 1252 1253- ``CONDITIONAL_CMO``: Boolean option to enable call to platform-defined routine 1254 ``plat_can_cmo`` which will return zero if cache management operations should 1255 be skipped and non-zero otherwise. By default, this option is disabled which 1256 means platform hook won't be checked and CMOs will always be performed when 1257 related functions are called. 1258 1259- ``ERRATA_ABI_SUPPORT``: Boolean option to enable support for Errata management 1260 firmware interface for the BL31 image. By default its disabled (``0``). 1261 1262- ``ERRATA_NON_ARM_INTERCONNECT``: Boolean option to enable support for the 1263 errata mitigation for platforms with a non-arm interconnect using the errata 1264 ABI. By default its disabled (``0``). 1265 1266- ``ENABLE_CONSOLE_GETC``: Boolean option to enable `getc()` feature in console 1267 driver(s). By default it is disabled (``0``) because it constitutes an attack 1268 vector into TF-A by potentially allowing an attacker to inject arbitrary data. 1269 This option should only be enabled on a need basis if there is a use case for 1270 reading characters from the console. 1271 1272GICv3 driver options 1273-------------------- 1274 1275GICv3 driver files are included using directive: 1276 1277``include drivers/arm/gic/v3/gicv3.mk`` 1278 1279The driver can be configured with the following options set in the platform 1280makefile: 1281 1282- ``GICV3_SUPPORT_GIC600``: Add support for the GIC-600 variants of GICv3. 1283 Enabling this option will add runtime detection support for the 1284 GIC-600, so is safe to select even for a GIC500 implementation. 1285 This option defaults to 0. 1286 1287- ``GICV3_SUPPORT_GIC600AE_FMU``: Add support for the Fault Management Unit 1288 for GIC-600 AE. Enabling this option will introduce support to initialize 1289 the FMU. Platforms should call the init function during boot to enable the 1290 FMU and its safety mechanisms. This option defaults to 0. 1291 1292- ``GICV3_IMPL_GIC600_MULTICHIP``: Selects GIC-600 variant with multichip 1293 functionality. This option defaults to 0 1294 1295- ``GICV3_OVERRIDE_DISTIF_PWR_OPS``: Allows override of default implementation 1296 of ``arm_gicv3_distif_pre_save`` and ``arm_gicv3_distif_post_restore`` 1297 functions. This is required for FVP platform which need to simulate GIC save 1298 and restore during SYSTEM_SUSPEND without powering down GIC. Default is 0. 1299 1300- ``GIC_ENABLE_V4_EXTN`` : Enables GICv4 related changes in GICv3 driver. 1301 This option defaults to 0. 1302 1303- ``GIC_EXT_INTID``: When set to ``1``, GICv3 driver will support extended 1304 PPI (1056-1119) and SPI (4096-5119) range. This option defaults to 0. 1305 1306Debugging options 1307----------------- 1308 1309To compile a debug version and make the build more verbose use 1310 1311.. code:: shell 1312 1313 make PLAT=<platform> DEBUG=1 V=1 all 1314 1315AArch64 GCC 11 uses DWARF version 5 debugging symbols by default. Some tools 1316(for example Arm-DS) might not support this and may need an older version of 1317DWARF symbols to be emitted by GCC. This can be achieved by using the 1318``-gdwarf-<version>`` flag, with the version being set to 2, 3, 4 or 5. Setting 1319the version to 4 is recommended for Arm-DS. 1320 1321When debugging logic problems it might also be useful to disable all compiler 1322optimizations by using ``-O0``. 1323 1324.. warning:: 1325 Using ``-O0`` could cause output images to be larger and base addresses 1326 might need to be recalculated (see the **Memory layout on Arm development 1327 platforms** section in the :ref:`Firmware Design`). 1328 1329Extra debug options can be passed to the build system by setting ``CFLAGS`` or 1330``LDFLAGS``: 1331 1332.. code:: shell 1333 1334 CFLAGS='-O0 -gdwarf-2' \ 1335 make PLAT=<platform> DEBUG=1 V=1 all 1336 1337Note that using ``-Wl,`` style compilation driver options in ``CFLAGS`` will be 1338ignored as the linker is called directly. 1339 1340It is also possible to introduce an infinite loop to help in debugging the 1341post-BL2 phase of TF-A. This can be done by rebuilding BL1 with the 1342``SPIN_ON_BL1_EXIT=1`` build flag. Refer to the :ref:`build_options_common` 1343section. In this case, the developer may take control of the target using a 1344debugger when indicated by the console output. When using Arm-DS, the following 1345commands can be used: 1346 1347:: 1348 1349 # Stop target execution 1350 interrupt 1351 1352 # 1353 # Prepare your debugging environment, e.g. set breakpoints 1354 # 1355 1356 # Jump over the debug loop 1357 set var $AARCH64::$Core::$PC = $AARCH64::$Core::$PC + 4 1358 1359 # Resume execution 1360 continue 1361 1362.. _build_options_experimental: 1363 1364Experimental build options 1365--------------------------- 1366 1367Common build options 1368~~~~~~~~~~~~~~~~~~~~ 1369 1370- ``DICE_PROTECTION_ENVIRONMENT``: Boolean flag to specify the measured boot 1371 backend when ``MEASURED_BOOT`` is enabled. The default value is ``0``. When 1372 set to ``1`` then measurements and additional metadata collected during the 1373 measured boot process are sent to the DICE Protection Environment for storage 1374 and processing. A certificate chain, which represents the boot state of the 1375 device, can be queried from the DPE. 1376 1377- ``DRTM_SUPPORT``: Boolean flag to enable support for Dynamic Root of Trust 1378 for Measurement (DRTM). This feature has trust dependency on BL31 for taking 1379 the measurements and recording them as per `PSA DRTM specification`_. For 1380 platforms which use BL2 to load/authenticate BL31 ``TRUSTED_BOARD_BOOT`` can 1381 be used and for the platforms which use ``RESET_TO_BL31`` platform owners 1382 should have mechanism to authenticate BL31. This option defaults to 0. 1383 1384- ``ENABLE_RME``: Numeric value to enable support for the ARMv9 Realm 1385 Management Extension. This flag can take the values 0 to 2, to align with 1386 the ``ENABLE_FEAT`` mechanism. Default value is 0. 1387 1388- ``RMMD_ENABLE_EL3_TOKEN_SIGN``: Numeric value to enable support for singing 1389 realm attestation token signing requests in EL3. This flag can take the 1390 values 0 and 1. The default value is ``0``. When set to ``1``, this option 1391 enables additional RMMD SMCs to push and pop requests for signing to 1392 EL3 along with platform hooks that must be implemented to service those 1393 requests and responses. 1394 1395- ``ENABLE_SME_FOR_NS``: Numeric value to enable Scalable Matrix Extension 1396 (SME), SVE, and FPU/SIMD for the non-secure world only. These features share 1397 registers so are enabled together. Using this option without 1398 ENABLE_SME_FOR_SWD=1 will cause SME, SVE, and FPU/SIMD instructions in secure 1399 world to trap to EL3. Requires ``ENABLE_SVE_FOR_NS`` to be set as SME is a 1400 superset of SVE. SME is an optional architectural feature for AArch64. 1401 At this time, this build option cannot be used on systems that have 1402 SPD=spmd/SPM_MM and atempting to build with this option will fail. 1403 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 1404 mechanism. Default is 0. 1405 1406- ``ENABLE_SME2_FOR_NS``: Numeric value to enable Scalable Matrix Extension 1407 version 2 (SME2) for the non-secure world only. SME2 is an optional 1408 architectural feature for AArch64. 1409 This should be set along with ENABLE_SME_FOR_NS=1, if not, the default SME 1410 accesses will still be trapped. This flag can take the values 0 to 2, to 1411 align with the ``ENABLE_FEAT`` mechanism. Default is 0. 1412 1413- ``ENABLE_SME_FOR_SWD``: Boolean option to enable the Scalable Matrix 1414 Extension for secure world. Used along with SVE and FPU/SIMD. 1415 ENABLE_SME_FOR_NS and ENABLE_SVE_FOR_SWD must also be set to use this. 1416 Default is 0. 1417 1418- ``ENABLE_SPMD_LP`` : This boolean option is used jointly with the SPM 1419 Dispatcher option (``SPD=spmd``). When enabled (1) it indicates support 1420 for logical partitions in EL3, managed by the SPMD as defined in the 1421 FF-A v1.2 specification. This flag is disabled by default. This flag 1422 must not be used if ``SPMC_AT_EL3`` is enabled. 1423 1424- ``FEATURE_DETECTION``: Boolean option to enable the architectural features 1425 verification mechanism. This is a debug feature that compares the 1426 architectural features enabled through the feature specific build flags 1427 (ENABLE_FEAT_xxx) with the features actually available on the CPU running, 1428 and reports any discrepancies. 1429 This flag will also enable errata ordering checking for ``DEBUG`` builds. 1430 1431 It is expected that this feature is only used for flexible platforms like 1432 software emulators, or for hardware platforms at bringup time, to verify 1433 that the configured feature set matches the CPU. 1434 The ``FEATURE_DETECTION`` macro is disabled by default. 1435 1436- ``PSA_CRYPTO``: Boolean option for enabling MbedTLS PSA crypto APIs support. 1437 The platform will use PSA compliant Crypto APIs during authentication and 1438 image measurement process by enabling this option. It uses APIs defined as 1439 per the `PSA Crypto API specification`_. This feature is only supported if 1440 using MbedTLS 3.x version. It is disabled (``0``) by default. 1441 1442- ``TRANSFER_LIST``: Setting this to ``1`` enables support for Firmware 1443 Handoff using Transfer List defined in `Firmware Handoff specification`_. 1444 This defaults to ``0``. Current implementation follows the Firmware Handoff 1445 specification v0.9. 1446 1447- ``USE_DEBUGFS``: When set to 1 this option exposes a virtual filesystem 1448 interface through BL31 as a SiP SMC function. 1449 Default is disabled (0). 1450 1451- ``HOB_LIST``: Setting this to ``1`` enables support for passing boot 1452 information using HOB defined in `Platform Initialization specification`_. 1453 This defaults to ``0``. 1454 1455Firmware update options 1456~~~~~~~~~~~~~~~~~~~~~~~ 1457 1458- ``PSA_FWU_SUPPORT``: Enable the firmware update mechanism as per the 1459 `PSA FW update specification`_. The default value is 0. 1460 PSA firmware update implementation has few limitations, such as: 1461 1462 - BL2 is not part of the protocol-updatable images. If BL2 needs to 1463 be updated, then it should be done through another platform-defined 1464 mechanism. 1465 1466 - It assumes the platform's hardware supports CRC32 instructions. 1467 1468- ``NR_OF_FW_BANKS``: Define the number of firmware banks. This flag is used 1469 in defining the firmware update metadata structure. This flag is by default 1470 set to '2'. 1471 1472- ``NR_OF_IMAGES_IN_FW_BANK``: Define the number of firmware images in each 1473 firmware bank. Each firmware bank must have the same number of images as per 1474 the `PSA FW update specification`_. 1475 This flag is used in defining the firmware update metadata structure. This 1476 flag is by default set to '1'. 1477 1478- ``PSA_FWU_METADATA_FW_STORE_DESC``: To be enabled when the FWU 1479 metadata contains image description. The default value is 1. 1480 1481 The version 2 of the FWU metadata allows for an opaque metadata 1482 structure where a platform can choose to not include the firmware 1483 store description in the metadata structure. This option indicates 1484 if the firmware store description, which provides information on 1485 the updatable images is part of the structure. 1486 1487-------------- 1488 1489*Copyright (c) 2019-2025, Arm Limited. All rights reserved.* 1490 1491.. _DEN0115: https://developer.arm.com/docs/den0115/latest 1492.. _PSA FW update specification: https://developer.arm.com/documentation/den0118/latest/ 1493.. _PSA DRTM specification: https://developer.arm.com/documentation/den0113/a 1494.. _GCC: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html 1495.. _Clang: https://clang.llvm.org/docs/DiagnosticsReference.html 1496.. _Firmware Handoff specification: https://github.com/FirmwareHandoff/firmware_handoff/releases/tag/v0.9 1497.. _PSA Crypto API specification: https://armmbed.github.io/mbed-crypto/html/ 1498.. _Platform Initialization specification: https://uefi.org/specs/PI/1.8/index.html 1499