1Build Options 2============= 3 4The TF-A build system supports the following build options. Unless mentioned 5otherwise, these options are expected to be specified at the build command 6line and are not to be modified in any component makefiles. Note that the 7build system doesn't track dependency for build options. Therefore, if any of 8the build options are changed from a previous build, a clean build must be 9performed. 10 11.. _build_options_common: 12 13Common build options 14-------------------- 15 16- ``AARCH32_INSTRUCTION_SET``: Choose the AArch32 instruction set that the 17 compiler should use. Valid values are T32 and A32. It defaults to T32 due to 18 code having a smaller resulting size. 19 20- ``AARCH32_SP`` : Choose the AArch32 Secure Payload component to be built as 21 as the BL32 image when ``ARCH=aarch32``. The value should be the path to the 22 directory containing the SP source, relative to the ``bl32/``; the directory 23 is expected to contain a makefile called ``<aarch32_sp-value>.mk``. 24 25- ``AMU_RESTRICT_COUNTERS``: Register reads to the group 1 counters will return 26 zero at all but the highest implemented exception level. External 27 memory-mapped debug accesses are unaffected by this control. 28 The default value is 1 for all platforms. 29 30- ``ARCH`` : Choose the target build architecture for TF-A. It can take either 31 ``aarch64`` or ``aarch32`` as values. By default, it is defined to 32 ``aarch64``. 33 34- ``ARM_ARCH_FEATURE``: Optional Arm Architecture build option which specifies 35 one or more feature modifiers. This option has the form ``[no]feature+...`` 36 and defaults to ``none``. It translates into compiler option 37 ``-march=armvX[.Y]-a+[no]feature+...``. See compiler's documentation for the 38 list of supported feature modifiers. 39 40- ``ARM_ARCH_MAJOR``: The major version of Arm Architecture to target when 41 compiling TF-A. Its value must be numeric, and defaults to 8 . See also, 42 *Armv8 Architecture Extensions* and *Armv7 Architecture Extensions* in 43 :ref:`Firmware Design`. 44 45- ``ARM_ARCH_MINOR``: The minor version of Arm Architecture to target when 46 compiling TF-A. Its value must be a numeric, and defaults to 0. See also, 47 *Armv8 Architecture Extensions* in :ref:`Firmware Design`. 48 49- ``ARM_BL2_SP_LIST_DTS``: Path to DTS file snippet to override the hardcoded 50 SP nodes in tb_fw_config. 51 52- ``ARM_SPMC_MANIFEST_DTS`` : path to an alternate manifest file used as the 53 SPMC Core manifest. Valid when ``SPD=spmd`` is selected. 54 55- ``BL2``: This is an optional build option which specifies the path to BL2 56 image for the ``fip`` target. In this case, the BL2 in the TF-A will not be 57 built. 58 59- ``BL2U``: This is an optional build option which specifies the path to 60 BL2U image. In this case, the BL2U in TF-A will not be built. 61 62- ``RESET_TO_BL2``: Boolean option to enable BL2 entrypoint as the CPU reset 63 vector instead of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 64 entrypoint) or 1 (CPU reset to BL2 entrypoint). 65 The default value is 0. 66 67- ``BL2_RUNS_AT_EL3``: This is an implicit flag to denote that BL2 runs at EL3. 68 While it is explicitly set to 1 when RESET_TO_BL2 is set to 1 it can also be 69 true in a 4-world system where RESET_TO_BL2 is 0. 70 71- ``BL2_ENABLE_SP_LOAD``: Boolean option to enable loading SP packages from the 72 FIP. Automatically enabled if ``SP_LAYOUT_FILE`` is provided. 73 74- ``BL2_IN_XIP_MEM``: In some use-cases BL2 will be stored in eXecute In Place 75 (XIP) memory, like BL1. In these use-cases, it is necessary to initialize 76 the RW sections in RAM, while leaving the RO sections in place. This option 77 enable this use-case. For now, this option is only supported 78 when RESET_TO_BL2 is set to '1'. 79 80- ``BL31``: This is an optional build option which specifies the path to 81 BL31 image for the ``fip`` target. In this case, the BL31 in TF-A will not 82 be built. 83 84- ``BL31_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 85 file that contains the BL31 private key in PEM format or a PKCS11 URI. If 86 ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 87 88- ``BL32``: This is an optional build option which specifies the path to 89 BL32 image for the ``fip`` target. In this case, the BL32 in TF-A will not 90 be built. 91 92- ``BL32_EXTRA1``: This is an optional build option which specifies the path to 93 Trusted OS Extra1 image for the ``fip`` target. 94 95- ``BL32_EXTRA2``: This is an optional build option which specifies the path to 96 Trusted OS Extra2 image for the ``fip`` target. 97 98- ``BL32_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 99 file that contains the BL32 private key in PEM format or a PKCS11 URI. If 100 ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 101 102- ``RMM``: This is an optional build option used when ``ENABLE_RME`` is set. 103 It specifies the path to RMM binary for the ``fip`` target. If the RMM option 104 is not specified, TF-A builds the TRP to load and run at R-EL2. 105 106- ``BL33``: Path to BL33 image in the host file system. This is mandatory for 107 ``fip`` target in case TF-A BL2 is used. 108 109- ``BL33_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 110 file that contains the BL33 private key in PEM format or a PKCS11 URI. If 111 ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 112 113- ``BRANCH_PROTECTION``: Numeric value to enable ARMv8.3 Pointer Authentication 114 and ARMv8.5 Branch Target Identification support for TF-A BL images themselves. 115 If enabled, it is needed to use a compiler that supports the option 116 ``-mbranch-protection``. The value of the ``-march`` (via ``ARM_ARCH_MINOR`` 117 and ``ARM_ARCH_MAJOR``) option will control which instructions will be 118 emitted (HINT space or not). Selects the branch protection features to use: 119- 0: Default value turns off all types of branch protection (FEAT_STATE_DISABLED) 120- 1: Enables all types of branch protection features 121- 2: Return address signing to its standard level 122- 3: Extend the signing to include leaf functions 123- 4: Turn on branch target identification mechanism 124- 5: Enables all types of branch protection features, only if present in 125 hardware (FEAT_STATE_CHECK). 126 127 The table below summarizes ``BRANCH_PROTECTION`` values, GCC compilation options 128 and resulting PAuth/BTI features. 129 130 +-------+--------------+-------+-----+ 131 | Value | GCC option | PAuth | BTI | 132 +=======+==============+=======+=====+ 133 | 0 | none | N | N | 134 +-------+--------------+-------+-----+ 135 | 1 | standard | Y | Y | 136 +-------+--------------+-------+-----+ 137 | 2 | pac-ret | Y | N | 138 +-------+--------------+-------+-----+ 139 | 3 | pac-ret+leaf | Y | N | 140 +-------+--------------+-------+-----+ 141 | 4 | bti | N | Y | 142 +-------+--------------+-------+-----+ 143 | 5 | dynamic | Y | Y | 144 +-------+--------------+-------+-----+ 145 146 This option defaults to 0. 147 Note that Pointer Authentication is enabled for Non-secure world 148 irrespective of the value of this option if the CPU supports it. 149 150- ``BUILD_MESSAGE_TIMESTAMP``: String used to identify the time and date of the 151 compilation of each build. It must be set to a C string (including quotes 152 where applicable). Defaults to a string that contains the time and date of 153 the compilation. 154 155- ``BUILD_STRING``: Input string for VERSION_STRING, which allows the TF-A 156 build to be uniquely identified. Defaults to the current git commit id. 157 158- ``BUILD_BASE``: Output directory for the build. Defaults to ``./build`` 159 160- ``CFLAGS``: Extra user options appended on the compiler's command line in 161 addition to the options set by the build system. 162 163- ``COLD_BOOT_SINGLE_CPU``: This option indicates whether the platform may 164 release several CPUs out of reset. It can take either 0 (several CPUs may be 165 brought up) or 1 (only one CPU will ever be brought up during cold reset). 166 Default is 0. If the platform always brings up a single CPU, there is no 167 need to distinguish between primary and secondary CPUs and the boot path can 168 be optimised. The ``plat_is_my_cpu_primary()`` and 169 ``plat_secondary_cold_boot_setup()`` platform porting interfaces do not need 170 to be implemented in this case. 171 172- ``COT``: When Trusted Boot is enabled, selects the desired chain of trust. 173 Defaults to ``tbbr``. 174 175- ``CRASH_REPORTING``: A non-zero value enables a console dump of processor 176 register state when an unexpected exception occurs during execution of 177 BL31. This option defaults to the value of ``DEBUG`` - i.e. by default 178 this is only enabled for a debug build of the firmware. 179 180- ``CREATE_KEYS``: This option is used when ``GENERATE_COT=1``. It tells the 181 certificate generation tool to create new keys in case no valid keys are 182 present or specified. Allowed options are '0' or '1'. Default is '1'. 183 184- ``CTX_INCLUDE_AARCH32_REGS`` : Boolean option that, when set to 1, will cause 185 the AArch32 system registers to be included when saving and restoring the 186 CPU context. The option must be set to 0 for AArch64-only platforms (that 187 is on hardware that does not implement AArch32, or at least not at EL1 and 188 higher ELs). Default value is 1. 189 190- ``CTX_INCLUDE_FPREGS``: Boolean option that, when set to 1, will cause the FP 191 registers to be included when saving and restoring the CPU context. Default 192 is 0. 193 194- ``CTX_INCLUDE_MPAM_REGS``: Boolean option that, when set to 1, will cause the 195 Memory System Resource Partitioning and Monitoring (MPAM) 196 registers to be included when saving and restoring the CPU context. 197 Default is '0'. 198 199- ``CTX_INCLUDE_NEVE_REGS``: Numeric value, when set will cause the Armv8.4-NV 200 registers to be saved/restored when entering/exiting an EL2 execution 201 context. This flag can take values 0 to 2, to align with the 202 ``ENABLE_FEAT`` mechanism. Default value is 0. 203 204- ``CTX_INCLUDE_PAUTH_REGS``: Numeric value to enable the Pointer 205 Authentication for Secure world. This will cause the ARMv8.3-PAuth registers 206 to be included when saving and restoring the CPU context as part of world 207 switch. Automatically enabled when ``BRANCH_PROTECTION`` is enabled. This flag 208 can take values 0 to 2, to align with ``ENABLE_FEAT`` mechanism. Default value 209 is 0. 210 211 Note that Pointer Authentication is enabled for Non-secure world irrespective 212 of the value of this flag if the CPU supports it. Alternatively, when 213 ``BRANCH_PROTECTION`` is enabled, this flag is superseded. 214 215- ``CTX_INCLUDE_SVE_REGS``: Boolean option that, when set to 1, will cause the 216 SVE registers to be included when saving and restoring the CPU context. Note 217 that this build option requires ``ENABLE_SVE_FOR_SWD`` to be enabled. In 218 general, it is recommended to perform SVE context management in lower ELs 219 and skip in EL3 due to the additional cost of maintaining large data 220 structures to track the SVE state. Hence, the default value is 0. 221 222- ``DEBUG``: Chooses between a debug and release build. It can take either 0 223 (release) or 1 (debug) as values. 0 is the default. 224 225- ``DECRYPTION_SUPPORT``: This build flag enables the user to select the 226 authenticated decryption algorithm to be used to decrypt firmware/s during 227 boot. It accepts 2 values: ``aes_gcm`` and ``none``. The default value of 228 this flag is ``none`` to disable firmware decryption which is an optional 229 feature as per TBBR. 230 231- ``DISABLE_BIN_GENERATION``: Boolean option to disable the generation 232 of the binary image. If set to 1, then only the ELF image is built. 233 0 is the default. 234 235- ``DISABLE_MTPMU``: Numeric option to disable ``FEAT_MTPMU`` (Multi Threaded 236 PMU). ``FEAT_MTPMU`` is an optional feature available on Armv8.6 onwards. 237 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 238 mechanism. Default is ``0``. 239 240- ``DYN_DISABLE_AUTH``: Provides the capability to dynamically disable Trusted 241 Board Boot authentication at runtime. This option is meant to be enabled only 242 for development platforms. ``TRUSTED_BOARD_BOOT`` flag must be set if this 243 flag has to be enabled. 0 is the default. 244 245- ``E``: Boolean option to make warnings into errors. Default is 1. 246 247 When specifying higher warnings levels (``W=1`` and higher), this option 248 defaults to 0. This is done to encourage contributors to use them, as they 249 are expected to produce warnings that would otherwise fail the build. New 250 contributions are still expected to build with ``W=0`` and ``E=1`` (the 251 default). 252 253- ``EARLY_CONSOLE``: This option is used to enable early traces before default 254 console is properly setup. It introduces EARLY_* traces macros, that will 255 use the non-EARLY traces macros if the flag is enabled, or do nothing 256 otherwise. To use this feature, platforms will have to create the function 257 plat_setup_early_console(). 258 Default is 0 (disabled) 259 260- ``EL3_PAYLOAD_BASE``: This option enables booting an EL3 payload instead of 261 the normal boot flow. It must specify the entry point address of the EL3 262 payload. Please refer to the "Booting an EL3 payload" section for more 263 details. 264 265- ``ENABLE_AMU_AUXILIARY_COUNTERS``: Enables support for AMU auxiliary counters 266 (also known as group 1 counters). These are implementation-defined counters, 267 and as such require additional platform configuration. Default is 0. 268 269- ``ENABLE_ASSERTIONS``: This option controls whether or not calls to ``assert()`` 270 are compiled out. For debug builds, this option defaults to 1, and calls to 271 ``assert()`` are left in place. For release builds, this option defaults to 0 272 and calls to ``assert()`` function are compiled out. This option can be set 273 independently of ``DEBUG``. It can also be used to hide any auxiliary code 274 that is only required for the assertion and does not fit in the assertion 275 itself. 276 277- ``ENABLE_BACKTRACE``: This option controls whether to enable backtrace 278 dumps or not. It is supported in both AArch64 and AArch32. However, in 279 AArch32 the format of the frame records are not defined in the AAPCS and they 280 are defined by the implementation. This implementation of backtrace only 281 supports the format used by GCC when T32 interworking is disabled. For this 282 reason enabling this option in AArch32 will force the compiler to only 283 generate A32 code. This option is enabled by default only in AArch64 debug 284 builds, but this behaviour can be overridden in each platform's Makefile or 285 in the build command line. 286 287- ``ENABLE_FEAT`` 288 The Arm architecture defines several architecture extension features, 289 named FEAT_xxx in the architecure manual. Some of those features require 290 setup code in higher exception levels, other features might be used by TF-A 291 code itself. 292 Most of the feature flags defined in the TF-A build system permit to take 293 the values 0, 1 or 2, with the following meaning: 294 295 :: 296 297 ENABLE_FEAT_* = 0: Feature is disabled statically at compile time. 298 ENABLE_FEAT_* = 1: Feature is enabled unconditionally at compile time. 299 ENABLE_FEAT_* = 2: Feature is enabled, but checked at runtime. 300 301 When setting the flag to 0, the feature is disabled during compilation, 302 and the compiler's optimisation stage and the linker will try to remove 303 as much of this code as possible. 304 If it is defined to 1, the code will use the feature unconditionally, so the 305 CPU is expected to support that feature. The FEATURE_DETECTION debug 306 feature, if enabled, will verify this. 307 If the feature flag is set to 2, support for the feature will be compiled 308 in, but its existence will be checked at runtime, so it works on CPUs with 309 or without the feature. This is mostly useful for platforms which either 310 support multiple different CPUs, or where the CPU is configured at runtime, 311 like in emulators. 312 313- ``ENABLE_FEAT_AMU``: Numeric value to enable Activity Monitor Unit 314 extensions. This flag can take the values 0 to 2, to align with the 315 ``ENABLE_FEAT`` mechanism. This is an optional architectural feature 316 available on v8.4 onwards. Some v8.2 implementations also implement an AMU 317 and this option can be used to enable this feature on those systems as well. 318 This flag can take the values 0 to 2, the default is 0. 319 320- ``ENABLE_FEAT_AMUv1p1``: Numeric value to enable the ``FEAT_AMUv1p1`` 321 extension. ``FEAT_AMUv1p1`` is an optional feature available on Arm v8.6 322 onwards. This flag can take the values 0 to 2, to align with the 323 ``ENABLE_FEAT`` mechanism. Default value is ``0``. 324 325- ``ENABLE_FEAT_CPA2``: Numeric value to enable the ``FEAT_CPA2`` extension. 326 It enables checked pointer arithmetic in EL3, which will result in address 327 faults in the event that a pointer arithmetic overflow error occurs. This is 328 an optional feature starting from Arm v9.4 and This flag can take values 0 to 329 2, to align with the ``ENABLE_FEAT`` mechanism. Default value is ``0``. 330 331- ``ENABLE_FEAT_CSV2_2``: Numeric value to enable the ``FEAT_CSV2_2`` 332 extension. It allows access to the SCXTNUM_EL2 (Software Context Number) 333 register during EL2 context save/restore operations. ``FEAT_CSV2_2`` is an 334 optional feature available on Arm v8.0 onwards. This flag can take values 335 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 336 Default value is ``0``. 337 338- ``ENABLE_FEAT_CSV2_3``: Numeric value to enable support for ``FEAT_CSV2_3`` 339 extension. This feature is supported in AArch64 state only and is an optional 340 feature available in Arm v8.0 implementations. 341 ``FEAT_CSV2_3`` implies the implementation of ``FEAT_CSV2_2``. 342 The flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 343 mechanism. Default value is ``0``. 344 345- ``ENABLE_FEAT_DEBUGV8P9``: Numeric value to enable ``FEAT_DEBUGV8P9`` 346 extension which allows the ability to implement more than 16 breakpoints 347 and/or watchpoints. This feature is mandatory from v8.9 and is optional 348 from v8.8. This flag can take the values of 0 to 2, to align with the 349 ``ENABLE_FEAT`` mechanism. Default value is ``0``. 350 351- ``ENABLE_FEAT_DIT``: Numeric value to enable ``FEAT_DIT`` (Data Independent 352 Timing) extension. It allows setting the ``DIT`` bit of PSTATE in EL3. 353 ``FEAT_DIT`` is a mandatory architectural feature and is enabled from v8.4 354 and upwards. This flag can take the values 0 to 2, to align with the 355 ``ENABLE_FEAT`` mechanism. Default value is ``0``. 356 357- ``ENABLE_FEAT_ECV``: Numeric value to enable support for the Enhanced Counter 358 Virtualization feature, allowing for access to the CNTPOFF_EL2 (Counter-timer 359 Physical Offset register) during EL2 to EL3 context save/restore operations. 360 Its a mandatory architectural feature and is enabled from v8.6 and upwards. 361 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 362 mechanism. Default value is ``0``. 363 364- ``ENABLE_FEAT_FPMR``: Numerical value to enable support for Floating Point 365 Mode Register feature, allowing access to the FPMR register. FPMR register 366 controls the behaviors of FP8 instructions. It is an optional architectural 367 feature from v9.2 and upwards. This flag can take value of 0 to 2, to align 368 with the ``FEATURE_DETECTION`` mechanism. Default value is ``0``. 369 370- ``ENABLE_FEAT_FGT``: Numeric value to enable support for FGT (Fine Grain Traps) 371 feature allowing for access to the HDFGRTR_EL2 (Hypervisor Debug Fine-Grained 372 Read Trap Register) during EL2 to EL3 context save/restore operations. 373 Its a mandatory architectural feature and is enabled from v8.6 and upwards. 374 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 375 mechanism. Default value is ``0``. 376 377- ``ENABLE_FEAT_FGT2``: Numeric value to enable support for FGT2 378 (Fine Grain Traps 2) feature allowing for access to Fine-grained trap 2 registers 379 during EL2 to EL3 context save/restore operations. 380 Its an optional architectural feature and is available from v8.8 and upwards. 381 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 382 mechanism. Default value is ``0``. 383 384- ``ENABLE_FEAT_FGWTE3``: Numeric value to enable support for 385 Fine Grained Write Trap EL3 (FEAT_FGWTE3), a feature that allows EL3 to 386 restrict overwriting certain EL3 registers after boot. 387 This lockdown is established by setting individual trap bits for 388 system registers that are not expected to be overwritten after boot. 389 This feature is an optional architectural feature and is available from 390 Armv9.4 onwards. This flag can take values from 0 to 2, aligning with 391 the ``ENABLE_FEAT`` mechanism. The default value is 0. 392 393 .. note:: 394 This feature currently traps access to all EL3 registers in 395 ``FGWTE3_EL3``, except for ``MDCR_EL3``, ``MPAM3_EL3``, 396 ``TPIDR_EL3``(when ``CRASH_REPORTING=1``), and 397 ``SCTLR_EL3``(when ``HW_ASSISTED_COHERENCY=0``). 398 If additional traps need to be disabled for specific platforms, 399 please contact the Arm team on `TF-A public mailing list`_. 400 401- ``ENABLE_FEAT_HCX``: Numeric value to set the bit SCR_EL3.HXEn in EL3 to 402 allow access to HCRX_EL2 (extended hypervisor control register) from EL2 as 403 well as adding HCRX_EL2 to the EL2 context save/restore operations. Its a 404 mandatory architectural feature and is enabled from v8.7 and upwards. This 405 flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 406 mechanism. Default value is ``0``. 407 408- ``ENABLE_FEAT_MOPS``: Numeric value to enable FEAT_MOPS (Standardization 409 of memory operations) when INIT_UNUSED_NS_EL2=1. 410 This feature is mandatory from v8.8 and enabling of FEAT_MOPS does not 411 require any settings from EL3 as the controls are present in EL2 registers 412 (HCRX_EL2.{MSCEn,MCE2} and SCTLR_EL2.MSCEn) and in most configurations 413 we expect EL2 to be present. But in case of INIT_UNUSED_NS_EL2=1 , 414 EL3 should configure the EL2 registers. This flag 415 can take values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 416 Default value is ``0``. 417 418- ``ENABLE_FEAT_MTE2``: Numeric value to enable Memory Tagging Extension2 419 if the platform wants to use this feature and MTE2 is enabled at ELX. 420 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 421 mechanism. Default value is ``0``. 422 423- ``ENABLE_FEAT_PAN``: Numeric value to enable the ``FEAT_PAN`` (Privileged 424 Access Never) extension. ``FEAT_PAN`` adds a bit to PSTATE, generating a 425 permission fault for any privileged data access from EL1/EL2 to virtual 426 memory address, accessible at EL0, provided (HCR_EL2.E2H=1). It is a 427 mandatory architectural feature and is enabled from v8.1 and upwards. This 428 flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 429 mechanism. Default value is ``0``. 430 431- ``ENABLE_FEAT_PAUTH_LR``: Numeric value to enable the ``FEAT_PAUTH_LR`` 432 extension. ``FEAT_PAUTH_LR`` is an optional feature available from Arm v9.4 433 onwards. This feature requires PAUTH to be enabled via the 434 ``BRANCH_PROTECTION`` flag. This flag can take the values 0 to 2, to align 435 with the ``ENABLE_FEAT`` mechanism. Default value is ``0``. 436 437- ``ENABLE_FEAT_RNG``: Numeric value to enable the ``FEAT_RNG`` extension. 438 ``FEAT_RNG`` is an optional feature available on Arm v8.5 onwards. This 439 flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 440 mechanism. Default value is ``0``. 441 442- ``ENABLE_FEAT_RNG_TRAP``: Numeric value to enable the ``FEAT_RNG_TRAP`` 443 extension. This feature is only supported in AArch64 state. This flag can 444 take values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 445 Default value is ``0``. ``FEAT_RNG_TRAP`` is an optional feature from 446 Armv8.5 onwards. 447 448- ``ENABLE_FEAT_SB``: Boolean option to let the TF-A code use the ``FEAT_SB`` 449 (Speculation Barrier) instruction ``FEAT_SB`` is an optional feature and 450 defaults to ``0`` for pre-Armv8.5 CPUs, but is mandatory for Armv8.5 or 451 later CPUs. It is enabled from v8.5 and upwards and if needed can be 452 overidden from platforms explicitly. 453 454- ``ENABLE_FEAT_SEL2``: Numeric value to enable the ``FEAT_SEL2`` (Secure EL2) 455 extension. ``FEAT_SEL2`` is a mandatory feature available on Arm v8.4. 456 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 457 mechanism. Default is ``0``. 458 459- ``ENABLE_FEAT_TWED``: Numeric value to enable the ``FEAT_TWED`` (Delayed 460 trapping of WFE Instruction) extension. ``FEAT_TWED`` is a optional feature 461 available on Arm v8.6. This flag can take values 0 to 2, to align with the 462 ``ENABLE_FEAT`` mechanism. Default is ``0``. 463 464 When ``ENABLE_FEAT_TWED`` is set to ``1``, WFE instruction trapping gets 465 delayed by the amount of value in ``TWED_DELAY``. 466 467- ``ENABLE_FEAT_VHE``: Numeric value to enable the ``FEAT_VHE`` (Virtualization 468 Host Extensions) extension. It allows access to CONTEXTIDR_EL2 register 469 during EL2 context save/restore operations.``FEAT_VHE`` is a mandatory 470 architectural feature and is enabled from v8.1 and upwards. It can take 471 values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 472 Default value is ``0``. 473 474- ``ENABLE_FEAT_TCR2``: Numeric value to set the bit SCR_EL3.ENTCR2 in EL3 to 475 allow access to TCR2_EL2 (extended translation control) from EL2 as 476 well as adding TCR2_EL2 to the EL2 context save/restore operations. Its a 477 mandatory architectural feature and is enabled from v8.9 and upwards. This 478 flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 479 mechanism. Default value is ``0``. 480 481- ``ENABLE_FEAT_S2PIE``: Numeric value to enable support for FEAT_S2PIE 482 at EL2 and below, and context switch relevant registers. This flag 483 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 484 mechanism. Default value is ``0``. 485 486- ``ENABLE_FEAT_S1PIE``: Numeric value to enable support for FEAT_S1PIE 487 at EL2 and below, and context switch relevant registers. This flag 488 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 489 mechanism. Default value is ``0``. 490 491- ``ENABLE_FEAT_S2POE``: Numeric value to enable support for FEAT_S2POE 492 at EL2 and below, and context switch relevant registers. This flag 493 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 494 mechanism. Default value is ``0``. 495 496- ``ENABLE_FEAT_S1POE``: Numeric value to enable support for FEAT_S1POE 497 at EL2 and below, and context switch relevant registers. This flag 498 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 499 mechanism. Default value is ``0``. 500 501- ``ENABLE_FEAT_GCS``: Numeric value to set the bit SCR_EL3.GCSEn in EL3 to 502 allow use of Guarded Control Stack from EL2 as well as adding the GCS 503 registers to the EL2 context save/restore operations. This flag can take 504 the values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 505 Default value is ``0``. 506 507 - ``ENABLE_FEAT_GCIE``: Boolean value to enable support for the GICv5 CPU 508 interface (see ``USE_GIC_DRIVER`` for the IRI). GICv5 and GICv3 are mutually 509 exclusive, so the ``ENABLE_FEAT`` mechanism is currently not supported. 510 Default value is ``0``. 511 512- ``ENABLE_FEAT_THE``: Numeric value to enable support for FEAT_THE 513 (Translation Hardening Extension) at EL2 and below, setting the bit 514 SCR_EL3.RCWMASKEn in EL3 to allow access to RCWMASK_EL1 and RCWSMASK_EL1 515 registers and context switch them. 516 Its an optional architectural feature and is available from v8.8 and upwards. 517 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 518 mechanism. Default value is ``0``. 519 520- ``ENABLE_FEAT_SCTLR2``: Numeric value to enable support for FEAT_SCTLR2 521 (Extension to SCTLR_ELx) at EL2 and below, setting the bit 522 SCR_EL3.SCTLR2En in EL3 to allow access to SCTLR2_ELx registers and 523 context switch them. This feature is OPTIONAL from Armv8.0 implementations 524 and mandatory in Armv8.9 implementations. 525 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 526 mechanism. Default value is ``0``. 527 528- ``ENABLE_FEAT_D128``: Numeric value to enable support for FEAT_D128 529 at EL2 and below, setting the bit SCT_EL3.D128En in EL3 to allow access to 530 128 bit version of system registers like PAR_EL1, TTBR0_EL1, TTBR1_EL1, 531 TTBR0_EL2, TTBR1_EL2, TTBR0_EL12, TTBR1_EL12 , VTTBR_EL2, RCWMASK_EL1, and 532 RCWSMASK_EL1. Its an optional architectural feature and is available from 533 9.3 and upwards. 534 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 535 mechanism. Default value is ``0``. 536 537- ``ENABLE_LTO``: Boolean option to enable Link Time Optimization (LTO) 538 support in GCC for TF-A. This option is currently only supported for 539 AArch64. Default is 0. 540 541- ``ENABLE_FEAT_MPAM``: Numeric value to enable lower ELs to use MPAM 542 feature. MPAM is an optional Armv8.4 extension that enables various memory 543 system components and resources to define partitions; software running at 544 various ELs can assign themselves to desired partition to control their 545 performance aspects. 546 547 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 548 mechanism. When this option is set to ``1`` or ``2``, EL3 allows lower ELs to 549 access their own MPAM registers without trapping into EL3. This option 550 doesn't make use of partitioning in EL3, however. Platform initialisation 551 code should configure and use partitions in EL3 as required. This option 552 defaults to ``2`` since MPAM is enabled by default for NS world only. 553 The flag is automatically disabled when the target 554 architecture is AArch32. 555 556- ``ENABLE_FEAT_MPAM_PE_BW_CTRL``: This option enables Armv9.3 MPAM 557 PE-side bandwidth controls and disables traps to EL3/EL2 (when 558 ``INIT_UNUSED_NS_EL2`` = 1). The flag accepts values from 0 to 2, in 559 line with the ``ENABLE_FEAT`` mechanism, and defaults to ``0``. 560 561- ``ENABLE_FEAT_LS64_ACCDATA``: Numeric value to enable access and save and 562 restore the ACCDATA_EL1 system register, at EL2 and below. This flag can 563 take the values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 564 Default value is ``0``. 565 566- ``ENABLE_FEAT_AIE``: Numeric value to enable access to the (A)MAIR2 system 567 registers from non-secure world. This flag can take the values 0 to 2, to 568 align with the ``ENABLE_FEAT`` mechanism. 569 Default value is ``0``. 570 571- ``ENABLE_MPMM``: Boolean option to enable support for the Maximum Power 572 Mitigation Mechanism supported by certain Arm cores, which allows the SoC 573 firmware to detect and limit high activity events to assist in SoC processor 574 power domain dynamic power budgeting and limit the triggering of whole-rail 575 (i.e. clock chopping) responses to overcurrent conditions. Defaults to ``0``. 576 577- ``ENABLE_PIE``: Boolean option to enable Position Independent Executable(PIE) 578 support within generic code in TF-A. This option is currently only supported 579 in BL2, BL31, and BL32 (TSP) for AARCH64 binaries, and 580 in BL32 (SP_min) for AARCH32. Default is 0. 581 582- ``ENABLE_PMF``: Boolean option to enable support for optional Performance 583 Measurement Framework(PMF). Default is 0. 584 585- ``ENABLE_PSCI_STAT``: Boolean option to enable support for optional PSCI 586 functions ``PSCI_STAT_RESIDENCY`` and ``PSCI_STAT_COUNT``. Default is 0. 587 In the absence of an alternate stat collection backend, ``ENABLE_PMF`` must 588 be enabled. If ``ENABLE_PMF`` is set, the residency statistics are tracked in 589 software. 590 591- ``ENABLE_RUNTIME_INSTRUMENTATION``: Boolean option to enable runtime 592 instrumentation which injects timestamp collection points into TF-A to 593 allow runtime performance to be measured. Currently, only PSCI is 594 instrumented. Enabling this option enables the ``ENABLE_PMF`` build option 595 as well. Default is 0. 596 597- ``ENABLE_SPE_FOR_NS`` : Numeric value to enable Statistical Profiling 598 extensions. This is an optional architectural feature for AArch64. 599 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 600 mechanism. The default is 2 but is automatically disabled when the target 601 architecture is AArch32. 602 603- ``ENABLE_SVE_FOR_NS``: Numeric value to enable Scalable Vector Extension 604 (SVE) for the Non-secure world only. SVE is an optional architectural feature 605 for AArch64. This flag can take the values 0 to 2, to align with the 606 ``ENABLE_FEAT`` mechanism. At this time, this build option cannot be used on 607 systems that have SPM_MM enabled. The default value is 2. 608 609 Note that when SVE is enabled for the Non-secure world, access 610 to SVE, SIMD and floating-point functionality from the Secure world is 611 independently controlled by build option ``ENABLE_SVE_FOR_SWD``. When enabling 612 ``CTX_INCLUDE_FPREGS`` and ``ENABLE_SVE_FOR_NS`` together, it is mandatory to 613 enable ``CTX_INCLUDE_SVE_REGS``. This is to avoid corruption of the Non-secure 614 world data in the Z-registers which are aliased by the SIMD and FP registers. 615 616- ``ENABLE_SVE_FOR_SWD``: Boolean option to enable SVE and FPU/SIMD functionality 617 for the Secure world. SVE is an optional architectural feature for AArch64. 618 The default is 0 and it is automatically disabled when the target architecture 619 is AArch32. 620 621 .. note:: 622 This build flag requires ``ENABLE_SVE_FOR_NS`` to be enabled. When enabling 623 ``ENABLE_SVE_FOR_SWD``, a developer must carefully consider whether 624 ``CTX_INCLUDE_SVE_REGS`` is also needed. 625 626- ``ENABLE_STACK_PROTECTOR``: String option to enable the stack protection 627 checks in GCC. Allowed values are "all", "strong", "default" and "none". The 628 default value is set to "none". "strong" is the recommended stack protection 629 level if this feature is desired. "none" disables the stack protection. For 630 all values other than "none", the ``plat_get_stack_protector_canary()`` 631 platform hook needs to be implemented. The value is passed as the last 632 component of the option ``-fstack-protector-$ENABLE_STACK_PROTECTOR``. 633 634- ``ENABLE_ERRATA_ALL``: This option is used only for testing purposes, Boolean 635 option to enable the workarounds for all errata that TF-A implements. Normally 636 they should be explicitly enabled depending on each platform's needs. Not 637 recommended for release builds. This option is default set to 0. 638 639- ``ENCRYPT_BL31``: Binary flag to enable encryption of BL31 firmware. This 640 flag depends on ``DECRYPTION_SUPPORT`` build flag. 641 642- ``ENCRYPT_BL32``: Binary flag to enable encryption of Secure BL32 payload. 643 This flag depends on ``DECRYPTION_SUPPORT`` build flag. 644 645- ``ENC_KEY``: A 32-byte (256-bit) symmetric key in hex string format. It could 646 either be SSK or BSSK depending on ``FW_ENC_STATUS`` flag. This value depends 647 on ``DECRYPTION_SUPPORT`` build flag. 648 649- ``ENC_NONCE``: A 12-byte (96-bit) encryption nonce or Initialization Vector 650 (IV) in hex string format. This value depends on ``DECRYPTION_SUPPORT`` 651 build flag. 652 653- ``ERROR_DEPRECATED``: This option decides whether to treat the usage of 654 deprecated platform APIs, helper functions or drivers within Trusted 655 Firmware as error. It can take the value 1 (flag the use of deprecated 656 APIs as error) or 0. The default is 0. 657 658- ``ETHOSN_NPU_DRIVER``: boolean option to enable a SiP service that can 659 configure an Arm® Ethos™-N NPU. To use this service the target platform's 660 ``HW_CONFIG`` must include the device tree nodes for the NPU. Currently, only 661 the Arm Juno platform has this included in its ``HW_CONFIG`` and the platform 662 only loads the ``HW_CONFIG`` in AArch64 builds. Default is 0. 663 664- ``ETHOSN_NPU_TZMP1``: boolean option to enable TZMP1 support for the 665 Arm® Ethos™-N NPU. Requires ``ETHOSN_NPU_DRIVER`` and 666 ``TRUSTED_BOARD_BOOT`` to be enabled. 667 668- ``ETHOSN_NPU_FW``: location of the NPU firmware binary 669 (```ethosn.bin```). This firmware image will be included in the FIP and 670 loaded at runtime. 671 672- ``EL3_EXCEPTION_HANDLING``: When set to ``1``, enable handling of exceptions 673 targeted at EL3. When set ``0`` (default), no exceptions are expected or 674 handled at EL3, and a panic will result. The exception to this rule is when 675 ``SPMD_SPM_AT_SEL2`` is set to ``1``, in which case, only exceptions 676 occuring during normal world execution, are trapped to EL3. Any exception 677 trapped during secure world execution are trapped to the SPMC. This is 678 supported only for AArch64 builds. 679 680- ``EVENT_LOG_LEVEL``: Chooses the log level to use for Measured Boot when 681 ``MEASURED_BOOT`` is enabled. For a list of valid values, see ``LOG_LEVEL``. 682 Default value is 40 (LOG_LEVEL_INFO). 683 684- ``FAULT_INJECTION_SUPPORT``: ARMv8.4 extensions introduced support for fault 685 injection from lower ELs, and this build option enables lower ELs to use 686 Error Records accessed via System Registers to inject faults. This is 687 applicable only to AArch64 builds. 688 689 This feature is intended for testing purposes only, and is advisable to keep 690 disabled for production images. 691 692- ``FIP_NAME``: This is an optional build option which specifies the FIP 693 filename for the ``fip`` target. Default is ``fip.bin``. 694 695- ``FWU_FIP_NAME``: This is an optional build option which specifies the FWU 696 FIP filename for the ``fwu_fip`` target. Default is ``fwu_fip.bin``. 697 698- ``FW_ENC_STATUS``: Top level firmware's encryption numeric flag, values: 699 700 :: 701 702 0: Encryption is done with Secret Symmetric Key (SSK) which is common 703 for a class of devices. 704 1: Encryption is done with Binding Secret Symmetric Key (BSSK) which is 705 unique per device. 706 707 This flag depends on ``DECRYPTION_SUPPORT`` build flag. 708 709- ``GENERATE_COT``: Boolean flag used to build and execute the ``cert_create`` 710 tool to create certificates as per the Chain of Trust described in 711 :ref:`Trusted Board Boot`. The build system then calls ``fiptool`` to 712 include the certificates in the FIP and FWU_FIP. Default value is '0'. 713 714 Specify both ``TRUSTED_BOARD_BOOT=1`` and ``GENERATE_COT=1`` to include support 715 for the Trusted Board Boot feature in the BL1 and BL2 images, to generate 716 the corresponding certificates, and to include those certificates in the 717 FIP and FWU_FIP. 718 719 Note that if ``TRUSTED_BOARD_BOOT=0`` and ``GENERATE_COT=1``, the BL1 and BL2 720 images will not include support for Trusted Board Boot. The FIP will still 721 include the corresponding certificates. This FIP can be used to verify the 722 Chain of Trust on the host machine through other mechanisms. 723 724 Note that if ``TRUSTED_BOARD_BOOT=1`` and ``GENERATE_COT=0``, the BL1 and BL2 725 images will include support for Trusted Board Boot, but the FIP and FWU_FIP 726 will not include the corresponding certificates, causing a boot failure. 727 728- ``GICV2_G0_FOR_EL3``: Unlike GICv3, the GICv2 architecture doesn't have 729 inherent support for specific EL3 type interrupts. Setting this build option 730 to ``1`` assumes GICv2 *Group 0* interrupts are expected to target EL3, both 731 by :ref:`platform abstraction layer<platform Interrupt Controller API>` and 732 :ref:`Interrupt Management Framework<Interrupt Management Framework>`. 733 This allows GICv2 platforms to enable features requiring EL3 interrupt type. 734 This also means that all GICv2 Group 0 interrupts are delivered to EL3, and 735 the Secure Payload interrupts needs to be synchronously handed over to Secure 736 EL1 for handling. The default value of this option is ``0``, which means the 737 Group 0 interrupts are assumed to be handled by Secure EL1. 738 739- ``HANDLE_EA_EL3_FIRST_NS``: When set to ``1``, External Aborts and SError 740 Interrupts, resulting from errors in NS world, will be always trapped in 741 EL3 i.e. in BL31 at runtime. When set to ``0`` (default), these exceptions 742 will be trapped in the current exception level (or in EL1 if the current 743 exception level is EL0). 744 745- ``HW_ASSISTED_COHERENCY``: On most Arm systems to-date, platform-specific 746 software operations are required for CPUs to enter and exit coherency. 747 However, newer systems exist where CPUs' entry to and exit from coherency 748 is managed in hardware. Such systems require software to only initiate these 749 operations, and the rest is managed in hardware, minimizing active software 750 management. In such systems, this boolean option enables TF-A to carry out 751 build and run-time optimizations during boot and power management operations. 752 This option defaults to 0 and if it is enabled, then it implies 753 ``WARMBOOT_ENABLE_DCACHE_EARLY`` is also enabled. 754 755 If this flag is disabled while the platform which TF-A is compiled for 756 includes cores that manage coherency in hardware, then a compilation error is 757 generated. This is based on the fact that a system cannot have, at the same 758 time, cores that manage coherency in hardware and cores that don't. In other 759 words, a platform cannot have, at the same time, cores that require 760 ``HW_ASSISTED_COHERENCY=1`` and cores that require 761 ``HW_ASSISTED_COHERENCY=0``. 762 763 Note that, when ``HW_ASSISTED_COHERENCY`` is enabled, version 2 of 764 translation library (xlat tables v2) must be used; version 1 of translation 765 library is not supported. 766 767- ``IMPDEF_SYSREG_TRAP``: Numeric value to enable the handling traps for 768 implementation defined system register accesses from lower ELs. Default 769 value is ``0``. 770 771- ``INVERTED_MEMMAP``: memmap tool print by default lower addresses at the 772 bottom, higher addresses at the top. This build flag can be set to '1' to 773 invert this behavior. Lower addresses will be printed at the top and higher 774 addresses at the bottom. 775 776- ``INIT_UNUSED_NS_EL2``: This build flag guards code that disables EL2 777 safely in scenario where NS-EL2 is present but unused. This flag is set to 0 778 by default. Platforms without NS-EL2 in use must enable this flag. 779 780- ``KEY_ALG``: This build flag enables the user to select the algorithm to be 781 used for generating the PKCS keys and subsequent signing of the certificate. 782 It accepts 5 values: ``rsa``, ``rsa_1_5``, ``ecdsa``, ``ecdsa-brainpool-regular`` 783 and ``ecdsa-brainpool-twisted``. The option ``rsa_1_5`` is the legacy PKCS#1 784 RSA 1.5 algorithm which is not TBBR compliant and is retained only for 785 compatibility. The default value of this flag is ``rsa`` which is the TBBR 786 compliant PKCS#1 RSA 2.1 scheme. 787 788- ``KEY_SIZE``: This build flag enables the user to select the key size for 789 the algorithm specified by ``KEY_ALG``. The valid values for ``KEY_SIZE`` 790 depend on the chosen algorithm and the cryptographic module. 791 792 +---------------------------+------------------------------------+ 793 | KEY_ALG | Possible key sizes | 794 +===========================+====================================+ 795 | rsa | 1024 , 2048 (default), 3072, 4096 | 796 +---------------------------+------------------------------------+ 797 | ecdsa | 256 (default), 384 | 798 +---------------------------+------------------------------------+ 799 | ecdsa-brainpool-regular | 256 (default) | 800 +---------------------------+------------------------------------+ 801 | ecdsa-brainpool-twisted | 256 (default) | 802 +---------------------------+------------------------------------+ 803 804- ``HASH_ALG``: This build flag enables the user to select the secure hash 805 algorithm. It accepts 3 values: ``sha256``, ``sha384`` and ``sha512``. 806 The default value of this flag is ``sha256``. 807 808- ``HW_CONFIG_BASE``: This option specifies the location in memory where the DTB 809 should either be loaded by BL2 or can be found by later stages. 810 811- ``LDFLAGS``: Extra user options appended to the linkers' command line in 812 addition to the one set by the build system. 813 814- ``LOG_LEVEL``: Chooses the log level, which controls the amount of console log 815 output compiled into the build. This should be one of the following: 816 817 :: 818 819 0 (LOG_LEVEL_NONE) 820 10 (LOG_LEVEL_ERROR) 821 20 (LOG_LEVEL_NOTICE) 822 30 (LOG_LEVEL_WARNING) 823 40 (LOG_LEVEL_INFO) 824 50 (LOG_LEVEL_VERBOSE) 825 826 All log output up to and including the selected log level is compiled into 827 the build. The default value is 40 in debug builds and 20 in release builds. 828 829- ``MEASURED_BOOT``: Boolean flag to include support for the Measured Boot 830 feature. This flag can be enabled with ``TRUSTED_BOARD_BOOT`` in order to 831 provide trust that the code taking the measurements and recording them has 832 not been tampered with. 833 834 This option defaults to 0. 835 836- ``DISCRETE_TPM``: Boolean flag to include support for a Discrete TPM. 837 838 This option defaults to 0. 839 840- ``TPM_INTERFACE``: When ``DISCRETE_TPM=1``, this is a required flag to 841 select the TPM interface. Currently only one interface is supported: 842 843 :: 844 845 FIFO_SPI 846 847- ``MBOOT_TPM_HASH_ALG``: Build flag to select the TPM hash algorithm used during 848 Measured Boot. Currently only accepts ``sha256`` as a valid algorithm. 849 850- ``MARCH_DIRECTIVE``: used to pass a -march option from the platform build 851 options to the compiler. An example usage: 852 853 .. code:: make 854 855 MARCH_DIRECTIVE := -march=armv8.5-a 856 857- ``HARDEN_SLS``: used to pass -mharden-sls=all from the TF-A build 858 options to the compiler currently supporting only of the options. 859 GCC documentation: 860 https://gcc.gnu.org/onlinedocs/gcc/AArch64-Options.html#index-mharden-sls 861 862 An example usage: 863 864 .. code:: make 865 866 HARDEN_SLS := 1 867 868 This option defaults to 0. 869 870- ``NON_TRUSTED_WORLD_KEY``: This option is used when ``GENERATE_COT=1``. It 871 specifies a file that contains the Non-Trusted World private key in PEM 872 format or a PKCS11 URI. If ``SAVE_KEYS=1``, only a file is accepted and it 873 will be used to save the key. 874 875- ``NS_BL2U``: Path to NS_BL2U image in the host file system. This image is 876 optional. It is only needed if the platform makefile specifies that it 877 is required in order to build the ``fwu_fip`` target. 878 879- ``NS_TIMER_SWITCH``: Enable save and restore for non-secure timer register 880 contents upon world switch. It can take either 0 (don't save and restore) or 881 1 (do save and restore). 0 is the default. An SPD may set this to 1 if it 882 wants the timer registers to be saved and restored. 883 884- ``OVERRIDE_LIBC``: This option allows platforms to override the default libc 885 for the BL image. It can be either 0 (include) or 1 (remove). The default 886 value is 0. 887 888- ``PL011_GENERIC_UART``: Boolean option to indicate the PL011 driver that 889 the underlying hardware is not a full PL011 UART but a minimally compliant 890 generic UART, which is a subset of the PL011. The driver will not access 891 any register that is not part of the SBSA generic UART specification. 892 Default value is 0 (a full PL011 compliant UART is present). 893 894- ``PLAT``: Choose a platform to build TF-A for. The chosen platform name 895 must be subdirectory of any depth under ``plat/``, and must contain a 896 platform makefile named ``platform.mk``. For example, to build TF-A for the 897 Arm Juno board, select PLAT=juno. 898 899- ``PLATFORM_REPORT_CTX_MEM_USE``: Reports the context memory allocated for 900 each core as well as the global context. The data includes the memory used 901 by each world and each privileged exception level. This build option is 902 applicable only for ``ARCH=aarch64`` builds. The default value is 0. 903 904- ``PRELOADED_BL33_BASE``: This option enables booting a preloaded BL33 image 905 instead of the normal boot flow. When defined, it must specify the entry 906 point address for the preloaded BL33 image. This option is incompatible with 907 ``EL3_PAYLOAD_BASE``. If both are defined, ``EL3_PAYLOAD_BASE`` has priority 908 over ``PRELOADED_BL33_BASE``. 909 910- ``PRESERVE_DSU_PMU_REGS``: This options when enabled allows the platform to 911 save/restore the DynamIQ Shared Unit's(DSU) Performance Monitoring Unit(PMU) 912 registers when the cluster goes through a power cycle. This is disabled by 913 default and platforms that require this feature have to enable them. 914 915- ``PROGRAMMABLE_RESET_ADDRESS``: This option indicates whether the reset 916 vector address can be programmed or is fixed on the platform. It can take 917 either 0 (fixed) or 1 (programmable). Default is 0. If the platform has a 918 programmable reset address, it is expected that a CPU will start executing 919 code directly at the right address, both on a cold and warm reset. In this 920 case, there is no need to identify the entrypoint on boot and the boot path 921 can be optimised. The ``plat_get_my_entrypoint()`` platform porting interface 922 does not need to be implemented in this case. 923 924- ``PSCI_EXTENDED_STATE_ID``: As per PSCI1.0 Specification, there are 2 formats 925 possible for the PSCI power-state parameter: original and extended State-ID 926 formats. This flag if set to 1, configures the generic PSCI layer to use the 927 extended format. The default value of this flag is 0, which means by default 928 the original power-state format is used by the PSCI implementation. This flag 929 should be specified by the platform makefile and it governs the return value 930 of PSCI_FEATURES API for CPU_SUSPEND smc function id. When this option is 931 enabled on Arm platforms, the option ``ARM_RECOM_STATE_ID_ENC`` needs to be 932 set to 1 as well. 933 934- ``PSCI_OS_INIT_MODE``: Boolean flag to enable support for optional PSCI 935 OS-initiated mode. This option defaults to 0. 936 937- ``ARCH_FEATURE_AVAILABILITY``: Boolean flag to enable support for the 938 optional SMCCC_ARCH_FEATURE_AVAILABILITY call. This option implicitly 939 interacts with IMPDEF_SYSREG_TRAP and software emulation. This option 940 defaults to 0. 941 942- ``ENABLE_FEAT_RAS``: Boolean flag to enable Armv8.2 RAS features. RAS features 943 are an optional extension for pre-Armv8.2 CPUs, but are mandatory for Armv8.2 944 or later CPUs. This flag can take the values 0 or 1. The default value is 0. 945 NOTE: This flag enables use of IESB capability to reduce entry latency into 946 EL3 even when RAS error handling is not performed on the platform. Hence this 947 flag is recommended to be turned on Armv8.2 and later CPUs. 948 949- ``RESET_TO_BL31``: Enable BL31 entrypoint as the CPU reset vector instead 950 of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 951 entrypoint) or 1 (CPU reset to BL31 entrypoint). 952 The default value is 0. 953 954- ``RESET_TO_SP_MIN``: SP_MIN is the minimal AArch32 Secure Payload provided 955 in TF-A. This flag configures SP_MIN entrypoint as the CPU reset vector 956 instead of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 957 entrypoint) or 1 (CPU reset to SP_MIN entrypoint). The default value is 0. 958 959- ``RME_GPT_BITLOCK_BLOCK``: This defines the block size (in number of 512MB 960- blocks) covered by a single bit of the bitlock structure during RME GPT 961- operations. The lower the block size, the better opportunity for 962- parallelising GPT operations but at the cost of more bits being needed 963- for the bitlock structure. This numeric parameter can take the values 964- from 0 to 512 and must be a power of 2. The value of 0 is special and 965- and it chooses a single spinlock for all GPT L1 table entries. Default 966- value is 1 which corresponds to block size of 512MB per bit of bitlock 967- structure. 968 969- ``RME_GPT_MAX_BLOCK``: Numeric value in MB to define the maximum size of 970 supported contiguous blocks in GPT Library. This parameter can take the 971 values 0, 2, 32 and 512. Setting this value to 0 disables use of Contigious 972 descriptors. Default value is 512. 973 974- ``ROT_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 975 file that contains the ROT private key in PEM format or a PKCS11 URI and 976 enforces public key hash generation. If ``SAVE_KEYS=1``, only a file is 977 accepted and it will be used to save the key. 978 979- ``SAVE_KEYS``: This option is used when ``GENERATE_COT=1``. It tells the 980 certificate generation tool to save the keys used to establish the Chain of 981 Trust. Allowed options are '0' or '1'. Default is '0' (do not save). 982 983- ``SCP_BL2``: Path to SCP_BL2 image in the host file system. This image is optional. 984 If a SCP_BL2 image is present then this option must be passed for the ``fip`` 985 target. 986 987- ``SCP_BL2_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 988 file that contains the SCP_BL2 private key in PEM format or a PKCS11 URI. 989 If ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 990 991- ``SCP_BL2U``: Path to SCP_BL2U image in the host file system. This image is 992 optional. It is only needed if the platform makefile specifies that it 993 is required in order to build the ``fwu_fip`` target. 994 995- ``SDEI_SUPPORT``: Setting this to ``1`` enables support for Software 996 Delegated Exception Interface to BL31 image. This defaults to ``0``. 997 998 When set to ``1``, the build option ``EL3_EXCEPTION_HANDLING`` must also be 999 set to ``1``. 1000 1001- ``SEPARATE_CODE_AND_RODATA``: Whether code and read-only data should be 1002 isolated on separate memory pages. This is a trade-off between security and 1003 memory usage. See "Isolating code and read-only data on separate memory 1004 pages" section in :ref:`Firmware Design`. This flag is disabled by default 1005 and affects all BL images. 1006 1007- ``SEPARATE_NOBITS_REGION``: Setting this option to ``1`` allows the NOBITS 1008 sections of BL31 (.bss, stacks, page tables, and coherent memory) to be 1009 allocated in RAM discontiguous from the loaded firmware image. When set, the 1010 platform is expected to provide definitions for ``BL31_NOBITS_BASE`` and 1011 ``BL31_NOBITS_LIMIT``. When the option is ``0`` (the default), NOBITS 1012 sections are placed in RAM immediately following the loaded firmware image. 1013 1014- ``SEPARATE_BL2_NOLOAD_REGION``: Setting this option to ``1`` allows the 1015 NOLOAD sections of BL2 (.bss, stacks, page tables) to be allocated in RAM 1016 discontiguous from loaded firmware images. When set, the platform need to 1017 provide definitions of ``BL2_NOLOAD_START`` and ``BL2_NOLOAD_LIMIT``. This 1018 flag is disabled by default and NOLOAD sections are placed in RAM immediately 1019 following the loaded firmware image. 1020 1021- ``SEPARATE_BL2_FIP``: This option enables the separation of the BL2 FIP image 1022 from the main FIP image. When this option is enabled, the BL2 FIP image is built 1023 as a separate FIP image. The default value is 0. 1024 1025- ``SEPARATE_SIMD_SECTION``: Setting this option to ``1`` allows the SIMD context 1026 data structures to be put in a dedicated memory region as decided by platform 1027 integrator. Default value is ``0`` which means the SIMD context is put in BSS 1028 section of EL3 firmware. 1029 1030- ``SMC_PCI_SUPPORT``: This option allows platforms to handle PCI configuration 1031 access requests via a standard SMCCC defined in `DEN0115`_. When combined with 1032 UEFI+ACPI this can provide a certain amount of OS forward compatibility 1033 with newer platforms that aren't ECAM compliant. 1034 1035- ``SPD``: Choose a Secure Payload Dispatcher component to be built into TF-A. 1036 This build option is only valid if ``ARCH=aarch64``. The value should be 1037 the path to the directory containing the SPD source, relative to 1038 ``services/spd/``; the directory is expected to contain a makefile called 1039 ``<spd-value>.mk``. The SPM Dispatcher standard service is located in 1040 services/std_svc/spmd and enabled by ``SPD=spmd``. The SPM Dispatcher 1041 cannot be enabled when the ``SPM_MM`` option is enabled. 1042 1043- ``SPIN_ON_BL1_EXIT``: This option introduces an infinite loop in BL1. It can 1044 take either 0 (no loop) or 1 (add a loop). 0 is the default. This loop stops 1045 execution in BL1 just before handing over to BL31. At this point, all 1046 firmware images have been loaded in memory, and the MMU and caches are 1047 turned off. Refer to the "Debugging options" section for more details. 1048 1049- ``SPMC_AT_EL3`` : This boolean option is used jointly with the SPM 1050 Dispatcher option (``SPD=spmd``). When enabled (1) it indicates the SPMC 1051 component runs at the EL3 exception level. The default value is ``0`` ( 1052 disabled). This configuration supports pre-Armv8.4 platforms (aka not 1053 implementing the ``FEAT_SEL2`` extension). 1054 1055- ``SPMC_AT_EL3_SEL0_SP`` : Boolean option to enable SEL0 SP load support when 1056 ``SPMC_AT_EL3`` is enabled. The default value if ``0`` (disabled). This 1057 option cannot be enabled (``1``) when (``SPMC_AT_EL3``) is disabled. 1058 1059- ``SPMC_OPTEE`` : This boolean option is used jointly with the SPM 1060 Dispatcher option (``SPD=spmd``) and with ``SPMD_SPM_AT_SEL2=0`` to 1061 indicate that the SPMC at S-EL1 is OP-TEE and an OP-TEE specific loading 1062 mechanism should be used. 1063 1064- ``SPMD_SPM_AT_SEL2`` : This boolean option is used jointly with the SPM 1065 Dispatcher option (``SPD=spmd``). When enabled (1) it indicates the SPMC 1066 component runs at the S-EL2 exception level provided by the ``FEAT_SEL2`` 1067 extension. This is the default when enabling the SPM Dispatcher. When 1068 disabled (0) it indicates the SPMC component runs at the S-EL1 execution 1069 state or at EL3 if ``SPMC_AT_EL3`` is enabled. The latter configurations 1070 support pre-Armv8.4 platforms (aka not implementing the ``FEAT_SEL2`` 1071 extension). 1072 1073- ``SPM_MM`` : Boolean option to enable the Management Mode (MM)-based Secure 1074 Partition Manager (SPM) implementation. The default value is ``0`` 1075 (disabled). This option cannot be enabled (``1``) when SPM Dispatcher is 1076 enabled (``SPD=spmd``). 1077 1078- ``SP_LAYOUT_FILE``: Platform provided path to JSON file containing the 1079 description of secure partitions. The build system will parse this file and 1080 package all secure partition blobs into the FIP. This file is not 1081 necessarily part of TF-A tree. Only available when ``SPD=spmd``. 1082 1083- ``SP_MIN_WITH_SECURE_FIQ``: Boolean flag to indicate the SP_MIN handles 1084 secure interrupts (caught through the FIQ line). Platforms can enable 1085 this directive if they need to handle such interruption. When enabled, 1086 the FIQ are handled in monitor mode and non secure world is not allowed 1087 to mask these events. Platforms that enable FIQ handling in SP_MIN shall 1088 implement the api ``sp_min_plat_fiq_handler()``. The default value is 0. 1089 1090- ``SVE_VECTOR_LEN``: SVE vector length to configure in ZCR_EL3. 1091 Platforms can configure this if they need to lower the hardware 1092 limit, for example due to asymmetric configuration or limitations of 1093 software run at lower ELs. The default is the architectural maximum 1094 of 2048 which should be suitable for most configurations, the 1095 hardware will limit the effective VL to the maximum physically supported 1096 VL. 1097 1098- ``TRNG_SUPPORT``: Setting this to ``1`` enables support for True 1099 Random Number Generator Interface to BL31 image. This defaults to ``0``. 1100 1101- ``TRUSTED_BOARD_BOOT``: Boolean flag to include support for the Trusted Board 1102 Boot feature. When set to '1', BL1 and BL2 images include support to load 1103 and verify the certificates and images in a FIP, and BL1 includes support 1104 for the Firmware Update. The default value is '0'. Generation and inclusion 1105 of certificates in the FIP and FWU_FIP depends upon the value of the 1106 ``GENERATE_COT`` option. 1107 1108 .. warning:: 1109 This option depends on ``CREATE_KEYS`` to be enabled. If the keys 1110 already exist in disk, they will be overwritten without further notice. 1111 1112- ``TRUSTED_WORLD_KEY``: This option is used when ``GENERATE_COT=1``. It 1113 specifies a file that contains the Trusted World private key in PEM 1114 format or a PKCS11 URI. If ``SAVE_KEYS=1``, only a file is accepted and 1115 it will be used to save the key. 1116 1117- ``TSP_INIT_ASYNC``: Choose BL32 initialization method as asynchronous or 1118 synchronous, (see "Initializing a BL32 Image" section in 1119 :ref:`Firmware Design`). It can take the value 0 (BL32 is initialized using 1120 synchronous method) or 1 (BL32 is initialized using asynchronous method). 1121 Default is 0. 1122 1123- ``TSP_NS_INTR_ASYNC_PREEMPT``: A non zero value enables the interrupt 1124 routing model which routes non-secure interrupts asynchronously from TSP 1125 to EL3 causing immediate preemption of TSP. The EL3 is responsible 1126 for saving and restoring the TSP context in this routing model. The 1127 default routing model (when the value is 0) is to route non-secure 1128 interrupts to TSP allowing it to save its context and hand over 1129 synchronously to EL3 via an SMC. 1130 1131 .. note:: 1132 When ``EL3_EXCEPTION_HANDLING`` is ``1``, ``TSP_NS_INTR_ASYNC_PREEMPT`` 1133 must also be set to ``1``. 1134 1135- ``TS_SP_FW_CONFIG``: DTC build flag to include Trusted Services (Crypto and 1136 internal-trusted-storage) as SP in tb_fw_config device tree. 1137 1138- ``TWED_DELAY``: Numeric value to be set in order to delay the trapping of 1139 WFE instruction. ``ENABLE_FEAT_TWED`` build option must be enabled to set 1140 this delay. It can take values in the range (0-15). Default value is ``0`` 1141 and based on this value, 2^(TWED_DELAY + 8) cycles will be delayed. 1142 Platforms need to explicitly update this value based on their requirements. 1143 1144- ``USE_ARM_LINK``: This flag determines whether to enable support for ARM 1145 linker. When the ``LINKER`` build variable points to the armlink linker, 1146 this flag is enabled automatically. To enable support for armlink, platforms 1147 will have to provide a scatter file for the BL image. Currently, Tegra 1148 platforms use the armlink support to compile BL3-1 images. 1149 1150- ``USE_COHERENT_MEM``: This flag determines whether to include the coherent 1151 memory region in the BL memory map or not (see "Use of Coherent memory in 1152 TF-A" section in :ref:`Firmware Design`). It can take the value 1 1153 (Coherent memory region is included) or 0 (Coherent memory region is 1154 excluded). Default is 1. 1155 1156- ``USE_KERNEL_DT_CONVENTION``: When this option is enabled, the hardware 1157 device tree is passed to BL33 using register x0, aligning with the expectations 1158 of the Linux kernel on Arm platforms. If this option is disabled, a different 1159 register, typically x1, may be used instead. This build option is 1160 not necessary when firmware handoff is active (that is, when TRANSFER_LIST=1 1161 is set), and it will be removed once all platforms have transitioned to that 1162 convention. 1163 1164- ``USE_DSU_DRIVER``: This flag enables DSU (DynamIQ Shared Unit) driver. 1165 The DSU driver allows save/restore of DSU PMU registers through 1166 ``PRESERVE_DSU_PMU_REGS`` build option, provides access to PMU registers at 1167 EL1 and allows platforms to configure powerdown and power settings of DSU. 1168 1169- ``ARM_IO_IN_DTB``: This flag determines whether to use IO based on the 1170 firmware configuration framework. This will move the io_policies into a 1171 configuration device tree, instead of static structure in the code base. 1172 1173- ``COT_DESC_IN_DTB``: This flag determines whether to create COT descriptors 1174 at runtime using fconf. If this flag is enabled, COT descriptors are 1175 statically captured in tb_fw_config file in the form of device tree nodes 1176 and properties. Currently, COT descriptors used by BL2 are moved to the 1177 device tree and COT descriptors used by BL1 are retained in the code 1178 base statically. 1179 1180- ``SDEI_IN_FCONF``: This flag determines whether to configure SDEI setup in 1181 runtime using firmware configuration framework. The platform specific SDEI 1182 shared and private events configuration is retrieved from device tree rather 1183 than static C structures at compile time. This is only supported if 1184 SDEI_SUPPORT build flag is enabled. 1185 1186- ``SEC_INT_DESC_IN_FCONF``: This flag determines whether to configure Group 0 1187 and Group1 secure interrupts using the firmware configuration framework. The 1188 platform specific secure interrupt property descriptor is retrieved from 1189 device tree in runtime rather than depending on static C structure at compile 1190 time. 1191 1192- ``USE_ROMLIB``: This flag determines whether library at ROM will be used. 1193 This feature creates a library of functions to be placed in ROM and thus 1194 reduces SRAM usage. Refer to :ref:`Library at ROM` for further details. Default 1195 is 0. 1196 1197- ``V``: Verbose build. If assigned anything other than 0, the build commands 1198 are printed. Default is 0. 1199 1200- ``VERSION_STRING``: String used in the log output for each TF-A image. 1201 Defaults to a string formed by concatenating the version number, build type 1202 and build string. 1203 1204- ``W``: Warning level. Some compiler warning options of interest have been 1205 regrouped and put in the root Makefile. This flag can take the values 0 to 3, 1206 each level enabling more warning options. Default is 0. 1207 1208 This option is closely related to the ``E`` option, which enables 1209 ``-Werror``. 1210 1211 - ``W=0`` (default) 1212 1213 Enables a wide assortment of warnings, most notably ``-Wall`` and 1214 ``-Wextra``, as well as various bad practices and things that are likely to 1215 result in errors. Includes some compiler specific flags. No warnings are 1216 expected at this level for any build. 1217 1218 - ``W=1`` 1219 1220 Enables warnings we want the generic build to include but are too time 1221 consuming to fix at the moment. It re-enables warnings taken out for 1222 ``W=0`` builds (a few of the ``-Wextra`` additions). This level is expected 1223 to eventually be merged into ``W=0``. Some warnings are expected on some 1224 builds, but new contributions should not introduce new ones. 1225 1226 - ``W=2`` (recommended) 1227 1228 Enables warnings we want the generic build to include but cannot be enabled 1229 due to external libraries. This level is expected to eventually be merged 1230 into ``W=0``. Lots of warnings are expected, primarily from external 1231 libraries like zlib and compiler-rt, but new controbutions should not 1232 introduce new ones. 1233 1234 - ``W=3`` 1235 1236 Enables warnings that are informative but not necessary and generally too 1237 verbose and frequently ignored. A very large number of warnings are 1238 expected. 1239 1240 The exact set of warning flags depends on the compiler and TF-A warning 1241 level, however they are all succinctly set in the top-level Makefile. Please 1242 refer to the `GCC`_ or `Clang`_ documentation for more information on the 1243 individual flags. 1244 1245- ``WARMBOOT_ENABLE_DCACHE_EARLY`` : Boolean option to enable D-cache early on 1246 the CPU after warm boot. This is applicable for platforms which do not 1247 require interconnect programming to enable cache coherency (eg: single 1248 cluster platforms). If this option is enabled, then warm boot path 1249 enables D-caches immediately after enabling MMU. This option defaults to 0. 1250 1251- ``ERRATA_SPECULATIVE_AT``: This flag determines whether to enable ``AT`` 1252 speculative errata workaround or not. It accepts 2 values: ``1`` and ``0``. 1253 The default value of this flag is ``0``. 1254 1255 ``AT`` speculative errata workaround disables stage1 page table walk for 1256 lower ELs (EL1 and EL0) in EL3 so that ``AT`` speculative fetch at any point 1257 produces either the correct result or failure without TLB allocation. 1258 1259 This boolean option enables errata for all below CPUs. 1260 1261 +---------+--------------+-------------------------+ 1262 | Errata | CPU | Workaround Define | 1263 +=========+==============+=========================+ 1264 | 1165522 | Cortex-A76 | ``ERRATA_A76_1165522`` | 1265 +---------+--------------+-------------------------+ 1266 | 1319367 | Cortex-A72 | ``ERRATA_A72_1319367`` | 1267 +---------+--------------+-------------------------+ 1268 | 1319537 | Cortex-A57 | ``ERRATA_A57_1319537`` | 1269 +---------+--------------+-------------------------+ 1270 | 1530923 | Cortex-A55 | ``ERRATA_A55_1530923`` | 1271 +---------+--------------+-------------------------+ 1272 | 1530924 | Cortex-A53 | ``ERRATA_A53_1530924`` | 1273 +---------+--------------+-------------------------+ 1274 1275 .. note:: 1276 This option is enabled by build only if platform sets any of above defines 1277 mentioned in ’Workaround Define' column in the table. 1278 If this option is enabled for the EL3 software then EL2 software also must 1279 implement this workaround due to the behaviour of the errata mentioned 1280 in new SDEN document which will get published soon. 1281 1282- ``ERRATA_SME_POWER_DOWN``: Boolean option to disable SME (PSTATE.{ZA,SM}=0) 1283 before power down and downgrade a suspend to power down request to a normal 1284 suspend request. This is necessary when software running at lower ELs requests 1285 power down without first clearing these bits. On affected cores, the CME 1286 connected to it will reject its power down request. The default value is 0. 1287 1288- ``RAS_TRAP_NS_ERR_REC_ACCESS``: This flag enables/disables the SCR_EL3.TERR 1289 bit, to trap access to the RAS ERR and RAS ERX registers from lower ELs. 1290 This flag is disabled by default. 1291 1292- ``OPENSSL_DIR``: This option is used to provide the path to a directory on the 1293 host machine where a custom installation of OpenSSL is located, which is used 1294 to build the certificate generation, firmware encryption and FIP tools. If 1295 this option is not set, the default OS installation will be used. 1296 1297- ``USE_SP804_TIMER``: Use the SP804 timer instead of the Generic Timer for 1298 functions that wait for an arbitrary time length (udelay and mdelay). The 1299 default value is 0. 1300 1301- ``ENABLE_BRBE_FOR_NS``: Numeric value to enable access to the branch record 1302 buffer registers from NS ELs when FEAT_BRBE is implemented. BRBE is an 1303 optional architectural feature for AArch64. This flag can take the values 1304 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. The default is 0 1305 and it is automatically disabled when the target architecture is AArch32. 1306 1307- ``ENABLE_TRBE_FOR_NS``: Numeric value to enable access of trace buffer 1308 control registers from NS ELs, NS-EL2 or NS-EL1(when NS-EL2 is implemented 1309 but unused) when FEAT_TRBE is implemented. TRBE is an optional architectural 1310 feature for AArch64. This flag can take the values 0 to 2, to align with the 1311 ``ENABLE_FEAT`` mechanism. The default is 0 and it is automatically 1312 disabled when the target architecture is AArch32. 1313 1314- ``ENABLE_SYS_REG_TRACE_FOR_NS``: Numeric value to enable trace system 1315 registers access from NS ELs, NS-EL2 or NS-EL1 (when NS-EL2 is implemented 1316 but unused). This feature is available if trace unit such as ETMv4.x, and 1317 ETE(extending ETM feature) is implemented. This flag can take the values 1318 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. The default is 0. 1319 1320- ``ENABLE_TRF_FOR_NS``: Numeric value to enable trace filter control registers 1321 access from NS ELs, NS-EL2 or NS-EL1 (when NS-EL2 is implemented but unused), 1322 if FEAT_TRF is implemented. This flag can take the values 0 to 2, to align 1323 with the ``ENABLE_FEAT`` mechanism. This flag is disabled by default. 1324 1325- ``CONDITIONAL_CMO``: Boolean option to enable call to platform-defined routine 1326 ``plat_can_cmo`` which will return zero if cache management operations should 1327 be skipped and non-zero otherwise. By default, this option is disabled which 1328 means platform hook won't be checked and CMOs will always be performed when 1329 related functions are called. 1330 1331- ``ERRATA_ABI_SUPPORT``: Boolean option to enable support for Errata management 1332 firmware interface for the BL31 image. By default its disabled (``0``). 1333 1334- ``ERRATA_NON_ARM_INTERCONNECT``: Boolean option to enable support for the 1335 errata mitigation for platforms with a non-arm interconnect using the errata 1336 ABI. By default its disabled (``0``). 1337 1338- ``ENABLE_CONSOLE_GETC``: Boolean option to enable `getc()` feature in console 1339 driver(s). By default it is disabled (``0``) because it constitutes an attack 1340 vector into TF-A by potentially allowing an attacker to inject arbitrary data. 1341 This option should only be enabled on a need basis if there is a use case for 1342 reading characters from the console. 1343 1344GIC driver options 1345-------------------- 1346 1347The generic GIC driver can be included with the ``USE_GIC_DRIVER`` option. It is 1348a numeric option that can take the following values: 1349 1350 - ``0``: generic GIC driver not enabled. Any support is entirely in platform 1351 code. Strongly discouraged for GIC based interrupt controllers. 1352 1353 - ``1``: enable the use of the generic GIC driver but do not include any files 1354 or function definitions. It is then the platform's responsibility to provide 1355 these. This is useful if the platform either has a custom GIC implementation 1356 or an alternative interrupt controller design. Use of this option is strongly 1357 discouraged for standard GIC implementations. 1358 1359 - ``2``: use the GICv2 driver 1360 1361 - ``3``: use the GICv3 driver. See the next section on how to further configure 1362 it. Use this option for GICv4 implementations. Requires calling 1363 ``gic_set_gicr_frames()``. 1364 1365 - ``5``: use the EXPERIMENTAL GICv5 driver. Requires ``ENABLE_FEAT_GCIE=1``. 1366 1367 For GIC driver versions other than ``1``, deciding when to save and restore GIC 1368 context on a power domain state transition, as well as any GIC actions outside 1369 of the PSCI library's visibility are the platform's responsibility. The driver 1370 provides implementations of all necessary subroutines, they only need to be 1371 called as appropriate. 1372 1373GICv3 driver options 1374~~~~~~~~~~~~~~~~~~~~ 1375 1376``USE_GIC_DRIVER=3`` is the preferred way of including GICv3 driver files. The 1377old (deprecated) way of included them is using the directive: 1378``include drivers/arm/gic/v3/gicv3.mk`` 1379 1380The driver can be configured with the following options set in the platform 1381makefile: 1382 1383- ``GICV3_SUPPORT_GIC600``: Add support for the GIC-600 variants of GICv3. 1384 Enabling this option will add runtime detection support for the 1385 GIC-600, so is safe to select even for a GIC500 implementation. 1386 This option defaults to 0. 1387 1388- ``GICV3_SUPPORT_GIC600AE_FMU``: Add support for the Fault Management Unit 1389 for GIC-600 AE. Enabling this option will introduce support to initialize 1390 the FMU. Platforms should call the init function during boot to enable the 1391 FMU and its safety mechanisms. This option defaults to 0. 1392 1393- ``GICV3_IMPL_GIC600_MULTICHIP``: Selects GIC-600 variant with multichip 1394 functionality. This option defaults to 0 1395 1396- ``GICV3_OVERRIDE_DISTIF_PWR_OPS``: Allows override of default implementation 1397 of ``arm_gicv3_distif_pre_save`` and ``arm_gicv3_distif_post_restore`` 1398 functions. This is required for FVP platform which need to simulate GIC save 1399 and restore during SYSTEM_SUSPEND without powering down GIC. Default is 0. 1400 1401- ``GIC_ENABLE_V4_EXTN`` : Enables GICv4 related changes in GICv3 driver. 1402 This option defaults to 0. 1403 1404- ``GIC_EXT_INTID``: When set to ``1``, GICv3 driver will support extended 1405 PPI (1056-1119) and SPI (4096-5119) range. This option defaults to 0. 1406 1407Debugging options 1408----------------- 1409 1410To compile a debug version and make the build more verbose use 1411 1412.. code:: shell 1413 1414 make PLAT=<platform> DEBUG=1 V=1 all 1415 1416AArch64 GCC 11 uses DWARF version 5 debugging symbols by default. Some tools 1417(for example Arm-DS) might not support this and may need an older version of 1418DWARF symbols to be emitted by GCC. This can be achieved by using the 1419``-gdwarf-<version>`` flag, with the version being set to 2, 3, 4 or 5. Setting 1420the version to 4 is recommended for Arm-DS. 1421 1422When debugging logic problems it might also be useful to disable all compiler 1423optimizations by using ``-O0``. 1424 1425.. warning:: 1426 Using ``-O0`` could cause output images to be larger and base addresses 1427 might need to be recalculated (see the **Memory layout on Arm development 1428 platforms** section in the :ref:`Firmware Design`). 1429 1430Extra debug options can be passed to the build system by setting ``CFLAGS`` or 1431``LDFLAGS``: 1432 1433.. code:: shell 1434 1435 CFLAGS='-O0 -gdwarf-2' \ 1436 make PLAT=<platform> DEBUG=1 V=1 all 1437 1438Note that using ``-Wl,`` style compilation driver options in ``CFLAGS`` will be 1439ignored as the linker is called directly. 1440 1441It is also possible to introduce an infinite loop to help in debugging the 1442post-BL2 phase of TF-A. This can be done by rebuilding BL1 with the 1443``SPIN_ON_BL1_EXIT=1`` build flag. Refer to the :ref:`build_options_common` 1444section. In this case, the developer may take control of the target using a 1445debugger when indicated by the console output. When using Arm-DS, the following 1446commands can be used: 1447 1448:: 1449 1450 # Stop target execution 1451 interrupt 1452 1453 # 1454 # Prepare your debugging environment, e.g. set breakpoints 1455 # 1456 1457 # Jump over the debug loop 1458 set var $AARCH64::$Core::$PC = $AARCH64::$Core::$PC + 4 1459 1460 # Resume execution 1461 continue 1462 1463.. _build_options_experimental: 1464 1465Experimental build options 1466--------------------------- 1467 1468Common build options 1469~~~~~~~~~~~~~~~~~~~~ 1470 1471- ``DICE_PROTECTION_ENVIRONMENT``: Boolean flag to specify the measured boot 1472 backend when ``MEASURED_BOOT`` is enabled. The default value is ``0``. When 1473 set to ``1`` then measurements and additional metadata collected during the 1474 measured boot process are sent to the DICE Protection Environment for storage 1475 and processing. A certificate chain, which represents the boot state of the 1476 device, can be queried from the DPE. 1477 1478- ``DRTM_SUPPORT``: Boolean flag to enable support for Dynamic Root of Trust 1479 for Measurement (DRTM). This feature has trust dependency on BL31 for taking 1480 the measurements and recording them as per `PSA DRTM specification`_. For 1481 platforms which use BL2 to load/authenticate BL31 ``TRUSTED_BOARD_BOOT`` can 1482 be used and for the platforms which use ``RESET_TO_BL31`` platform owners 1483 should have mechanism to authenticate BL31. This option defaults to 0. 1484 1485- ``ENABLE_RME``: Numeric value to enable support for the ARMv9 Realm 1486 Management Extension. This flag can take the values 0 to 2, to align with 1487 the ``ENABLE_FEAT`` mechanism. Default value is 0. 1488 1489- ``ENABLE_FEAT_MEC``: Numeric value to enable support for the ARMv9.2 Memory 1490 Encryption Contexts (MEC). This flag can take the values 0 to 2, to align 1491 with the ``ENABLE_FEAT`` mechanism. MEC supports multiple encryption 1492 contexts for Realm security state and only one encryption context for the 1493 rest of the security states. Default value is 0. 1494 1495- ``RMMD_ENABLE_EL3_TOKEN_SIGN``: Numeric value to enable support for singing 1496 realm attestation token signing requests in EL3. This flag can take the 1497 values 0 and 1. The default value is ``0``. When set to ``1``, this option 1498 enables additional RMMD SMCs to push and pop requests for signing to 1499 EL3 along with platform hooks that must be implemented to service those 1500 requests and responses. 1501 1502- ``ENABLE_SME_FOR_NS``: Numeric value to enable Scalable Matrix Extension 1503 (SME), SVE, and FPU/SIMD for the non-secure world only. These features share 1504 registers so are enabled together. Using this option without 1505 ENABLE_SME_FOR_SWD=1 will cause SME, SVE, and FPU/SIMD instructions in secure 1506 world to trap to EL3. Requires ``ENABLE_SVE_FOR_NS`` to be set as SME is a 1507 superset of SVE. SME is an optional architectural feature for AArch64. 1508 At this time, this build option cannot be used on systems that have 1509 SPD=spmd/SPM_MM and atempting to build with this option will fail. 1510 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 1511 mechanism. Default is 0. 1512 1513- ``ENABLE_SME2_FOR_NS``: Numeric value to enable Scalable Matrix Extension 1514 version 2 (SME2) for the non-secure world only. SME2 is an optional 1515 architectural feature for AArch64. 1516 This should be set along with ENABLE_SME_FOR_NS=1, if not, the default SME 1517 accesses will still be trapped. This flag can take the values 0 to 2, to 1518 align with the ``ENABLE_FEAT`` mechanism. Default is 0. 1519 1520- ``ENABLE_SME_FOR_SWD``: Boolean option to enable the Scalable Matrix 1521 Extension for secure world. Used along with SVE and FPU/SIMD. 1522 ENABLE_SME_FOR_NS and ENABLE_SVE_FOR_SWD must also be set to use this. 1523 Default is 0. 1524 1525- ``ENABLE_SPMD_LP`` : This boolean option is used jointly with the SPM 1526 Dispatcher option (``SPD=spmd``). When enabled (1) it indicates support 1527 for logical partitions in EL3, managed by the SPMD as defined in the 1528 FF-A v1.2 specification. This flag is disabled by default. This flag 1529 must not be used if ``SPMC_AT_EL3`` is enabled. 1530 1531- ``FEATURE_DETECTION``: Boolean option to enable the architectural features 1532 verification mechanism. This is a debug feature that compares the 1533 architectural features enabled through the feature specific build flags 1534 (ENABLE_FEAT_xxx) with the features actually available on the CPU running, 1535 and reports any discrepancies. 1536 This flag will also enable errata ordering checking for ``DEBUG`` builds. 1537 1538 It is expected that this feature is only used for flexible platforms like 1539 software emulators, or for hardware platforms at bringup time, to verify 1540 that the configured feature set matches the CPU. 1541 The ``FEATURE_DETECTION`` macro is disabled by default. 1542 1543- ``PSA_CRYPTO``: Boolean option for enabling MbedTLS PSA crypto APIs support. 1544 The platform will use PSA compliant Crypto APIs during authentication and 1545 image measurement process by enabling this option. It uses APIs defined as 1546 per the `PSA Crypto API specification`_. This feature is only supported if 1547 using MbedTLS 3.x version. It is disabled (``0``) by default. 1548 1549- ``LFA_SUPPORT``: Boolean flag to enable support for Live Firmware 1550 activation as per the specification. This option defaults to 0. 1551 1552- ``TRANSFER_LIST``: Setting this to ``1`` enables support for Firmware 1553 Handoff using Transfer List defined in `Firmware Handoff specification`_. 1554 This defaults to ``0``. Current implementation follows the Firmware Handoff 1555 specification v0.9. 1556 1557- ``USE_DEBUGFS``: When set to 1 this option exposes a virtual filesystem 1558 interface through BL31 as a SiP SMC function. 1559 Default is disabled (0). 1560 1561- ``HOB_LIST``: Setting this to ``1`` enables support for passing boot 1562 information using HOB defined in `Platform Initialization specification`_. 1563 This defaults to ``0``. 1564 1565- ``ENABLE_ACS_SMC``: When set to ``1``, this enables support for ACS SMC 1566 handler code to handle SMC calls from the Architecture Compliance Suite. The 1567 handler is intentionally empty to reserve the SMC section and allow 1568 project-specific implementations in future ACS use cases. 1569 1570Firmware update options 1571~~~~~~~~~~~~~~~~~~~~~~~ 1572 1573- ``PSA_FWU_SUPPORT``: Enable the firmware update mechanism as per the 1574 `PSA FW update specification`_. The default value is 0. 1575 PSA firmware update implementation has few limitations, such as: 1576 1577 - BL2 is not part of the protocol-updatable images. If BL2 needs to 1578 be updated, then it should be done through another platform-defined 1579 mechanism. 1580 1581 - It assumes the platform's hardware supports CRC32 instructions. 1582 1583- ``NR_OF_FW_BANKS``: Define the number of firmware banks. This flag is used 1584 in defining the firmware update metadata structure. This flag is by default 1585 set to '2'. 1586 1587- ``NR_OF_IMAGES_IN_FW_BANK``: Define the number of firmware images in each 1588 firmware bank. Each firmware bank must have the same number of images as per 1589 the `PSA FW update specification`_. 1590 This flag is used in defining the firmware update metadata structure. This 1591 flag is by default set to '1'. 1592 1593- ``PSA_FWU_METADATA_FW_STORE_DESC``: To be enabled when the FWU 1594 metadata contains image description. The default value is 1. 1595 1596 The version 2 of the FWU metadata allows for an opaque metadata 1597 structure where a platform can choose to not include the firmware 1598 store description in the metadata structure. This option indicates 1599 if the firmware store description, which provides information on 1600 the updatable images is part of the structure. 1601 1602-------------- 1603 1604*Copyright (c) 2019-2025, Arm Limited. All rights reserved.* 1605 1606.. _DEN0115: https://developer.arm.com/docs/den0115/latest 1607.. _PSA FW update specification: https://developer.arm.com/documentation/den0118/latest/ 1608.. _PSA DRTM specification: https://developer.arm.com/documentation/den0113/a 1609.. _GCC: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html 1610.. _Clang: https://clang.llvm.org/docs/DiagnosticsReference.html 1611.. _Firmware Handoff specification: https://github.com/FirmwareHandoff/firmware_handoff/releases/tag/v0.9 1612.. _PSA Crypto API specification: https://armmbed.github.io/mbed-crypto/html/ 1613.. _Platform Initialization specification: https://uefi.org/specs/PI/1.8/index.html 1614.. _TF-A public mailing list: https://lists.trustedfirmware.org/mailman3/lists/tf-a.lists.trustedfirmware.org/ 1615