1Build Options 2============= 3 4The TF-A build system supports the following build options. Unless mentioned 5otherwise, these options are expected to be specified at the build command 6line and are not to be modified in any component makefiles. Note that the 7build system doesn't track dependency for build options. Therefore, if any of 8the build options are changed from a previous build, a clean build must be 9performed. 10 11.. _build_options_common: 12 13Common build options 14-------------------- 15 16- ``AARCH32_INSTRUCTION_SET``: Choose the AArch32 instruction set that the 17 compiler should use. Valid values are T32 and A32. It defaults to T32 due to 18 code having a smaller resulting size. 19 20- ``AARCH32_SP`` : Choose the AArch32 Secure Payload component to be built as 21 as the BL32 image when ``ARCH=aarch32``. The value should be the path to the 22 directory containing the SP source, relative to the ``bl32/``; the directory 23 is expected to contain a makefile called ``<aarch32_sp-value>.mk``. 24 25- ``AMU_RESTRICT_COUNTERS``: Register reads to the group 1 counters will return 26 zero at all but the highest implemented exception level. External 27 memory-mapped debug accesses are unaffected by this control. 28 The default value is 1 for all platforms. 29 30- ``ARCH`` : Choose the target build architecture for TF-A. It can take either 31 ``aarch64`` or ``aarch32`` as values. By default, it is defined to 32 ``aarch64``. 33 34- ``ARM_ARCH_FEATURE``: Optional Arm Architecture build option which specifies 35 one or more feature modifiers. This option has the form ``[no]feature+...`` 36 and defaults to ``none``. It translates into compiler option 37 ``-march=armvX[.Y]-a+[no]feature+...``. See compiler's documentation for the 38 list of supported feature modifiers. 39 40- ``ARM_ARCH_MAJOR``: The major version of Arm Architecture to target when 41 compiling TF-A. Its value must be numeric, and defaults to 8 . See also, 42 *Armv8 Architecture Extensions* and *Armv7 Architecture Extensions* in 43 :ref:`Firmware Design`. 44 45- ``ARM_ARCH_MINOR``: The minor version of Arm Architecture to target when 46 compiling TF-A. Its value must be a numeric, and defaults to 0. See also, 47 *Armv8 Architecture Extensions* in :ref:`Firmware Design`. 48 49- ``ARM_BL2_SP_LIST_DTS``: Path to DTS file snippet to override the hardcoded 50 SP nodes in tb_fw_config. 51 52- ``ARM_SPMC_MANIFEST_DTS`` : path to an alternate manifest file used as the 53 SPMC Core manifest. Valid when ``SPD=spmd`` is selected. 54 55- ``BL2``: This is an optional build option which specifies the path to BL2 56 image for the ``fip`` target. In this case, the BL2 in the TF-A will not be 57 built. 58 59- ``BL2U``: This is an optional build option which specifies the path to 60 BL2U image. In this case, the BL2U in TF-A will not be built. 61 62- ``RESET_TO_BL2``: Boolean option to enable BL2 entrypoint as the CPU reset 63 vector instead of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 64 entrypoint) or 1 (CPU reset to BL2 entrypoint). 65 The default value is 0. 66 67- ``BL2_RUNS_AT_EL3``: This is an implicit flag to denote that BL2 runs at EL3. 68 While it is explicitly set to 1 when RESET_TO_BL2 is set to 1 it can also be 69 true in a 4-world system where RESET_TO_BL2 is 0. 70 71- ``BL2_ENABLE_SP_LOAD``: Boolean option to enable loading SP packages from the 72 FIP. Automatically enabled if ``SP_LAYOUT_FILE`` is provided. 73 74- ``BL2_IN_XIP_MEM``: In some use-cases BL2 will be stored in eXecute In Place 75 (XIP) memory, like BL1. In these use-cases, it is necessary to initialize 76 the RW sections in RAM, while leaving the RO sections in place. This option 77 enable this use-case. For now, this option is only supported 78 when RESET_TO_BL2 is set to '1'. 79 80- ``BL31``: This is an optional build option which specifies the path to 81 BL31 image for the ``fip`` target. In this case, the BL31 in TF-A will not 82 be built. 83 84- ``BL31_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 85 file that contains the BL31 private key in PEM format or a PKCS11 URI. If 86 ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 87 88- ``BL32``: This is an optional build option which specifies the path to 89 BL32 image for the ``fip`` target. In this case, the BL32 in TF-A will not 90 be built. 91 92- ``BL32_EXTRA1``: This is an optional build option which specifies the path to 93 Trusted OS Extra1 image for the ``fip`` target. 94 95- ``BL32_EXTRA2``: This is an optional build option which specifies the path to 96 Trusted OS Extra2 image for the ``fip`` target. 97 98- ``BL32_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 99 file that contains the BL32 private key in PEM format or a PKCS11 URI. If 100 ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 101 102- ``RMM``: This is an optional build option used when ``ENABLE_RME`` is set. 103 It specifies the path to RMM binary for the ``fip`` target. If the RMM option 104 is not specified, TF-A builds the TRP to load and run at R-EL2. 105 106- ``BL33``: Path to BL33 image in the host file system. This is mandatory for 107 ``fip`` target in case TF-A BL2 is used. 108 109- ``BL33_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 110 file that contains the BL33 private key in PEM format or a PKCS11 URI. If 111 ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 112 113- ``BRANCH_PROTECTION``: Numeric value to enable ARMv8.3 Pointer Authentication 114 and ARMv8.5 Branch Target Identification support for TF-A BL images themselves. 115 If enabled, it is needed to use a compiler that supports the option 116 ``-mbranch-protection``. Selects the branch protection features to use: 117- 0: Default value turns off all types of branch protection 118- 1: Enables all types of branch protection features 119- 2: Return address signing to its standard level 120- 3: Extend the signing to include leaf functions 121- 4: Turn on branch target identification mechanism 122 123 The table below summarizes ``BRANCH_PROTECTION`` values, GCC compilation options 124 and resulting PAuth/BTI features. 125 126 +-------+--------------+-------+-----+ 127 | Value | GCC option | PAuth | BTI | 128 +=======+==============+=======+=====+ 129 | 0 | none | N | N | 130 +-------+--------------+-------+-----+ 131 | 1 | standard | Y | Y | 132 +-------+--------------+-------+-----+ 133 | 2 | pac-ret | Y | N | 134 +-------+--------------+-------+-----+ 135 | 3 | pac-ret+leaf | Y | N | 136 +-------+--------------+-------+-----+ 137 | 4 | bti | N | Y | 138 +-------+--------------+-------+-----+ 139 140 This option defaults to 0. 141 Note that Pointer Authentication is enabled for Non-secure world 142 irrespective of the value of this option if the CPU supports it. 143 144- ``BUILD_MESSAGE_TIMESTAMP``: String used to identify the time and date of the 145 compilation of each build. It must be set to a C string (including quotes 146 where applicable). Defaults to a string that contains the time and date of 147 the compilation. 148 149- ``BUILD_STRING``: Input string for VERSION_STRING, which allows the TF-A 150 build to be uniquely identified. Defaults to the current git commit id. 151 152- ``BUILD_BASE``: Output directory for the build. Defaults to ``./build`` 153 154- ``CFLAGS``: Extra user options appended on the compiler's command line in 155 addition to the options set by the build system. 156 157- ``COLD_BOOT_SINGLE_CPU``: This option indicates whether the platform may 158 release several CPUs out of reset. It can take either 0 (several CPUs may be 159 brought up) or 1 (only one CPU will ever be brought up during cold reset). 160 Default is 0. If the platform always brings up a single CPU, there is no 161 need to distinguish between primary and secondary CPUs and the boot path can 162 be optimised. The ``plat_is_my_cpu_primary()`` and 163 ``plat_secondary_cold_boot_setup()`` platform porting interfaces do not need 164 to be implemented in this case. 165 166- ``COT``: When Trusted Boot is enabled, selects the desired chain of trust. 167 Defaults to ``tbbr``. 168 169- ``CRASH_REPORTING``: A non-zero value enables a console dump of processor 170 register state when an unexpected exception occurs during execution of 171 BL31. This option defaults to the value of ``DEBUG`` - i.e. by default 172 this is only enabled for a debug build of the firmware. 173 174- ``CREATE_KEYS``: This option is used when ``GENERATE_COT=1``. It tells the 175 certificate generation tool to create new keys in case no valid keys are 176 present or specified. Allowed options are '0' or '1'. Default is '1'. 177 178- ``CTX_INCLUDE_AARCH32_REGS`` : Boolean option that, when set to 1, will cause 179 the AArch32 system registers to be included when saving and restoring the 180 CPU context. The option must be set to 0 for AArch64-only platforms (that 181 is on hardware that does not implement AArch32, or at least not at EL1 and 182 higher ELs). Default value is 1. 183 184- ``CTX_INCLUDE_FPREGS``: Boolean option that, when set to 1, will cause the FP 185 registers to be included when saving and restoring the CPU context. Default 186 is 0. 187 188- ``CTX_INCLUDE_MPAM_REGS``: Boolean option that, when set to 1, will cause the 189 Memory System Resource Partitioning and Monitoring (MPAM) 190 registers to be included when saving and restoring the CPU context. 191 Default is '0'. 192 193- ``CTX_INCLUDE_NEVE_REGS``: Numeric value, when set will cause the Armv8.4-NV 194 registers to be saved/restored when entering/exiting an EL2 execution 195 context. This flag can take values 0 to 2, to align with the 196 ``ENABLE_FEAT`` mechanism. Default value is 0. 197 198- ``CTX_INCLUDE_PAUTH_REGS``: Numeric value to enable the Pointer 199 Authentication for Secure world. This will cause the ARMv8.3-PAuth registers 200 to be included when saving and restoring the CPU context as part of world 201 switch. This flag can take values 0 to 2, to align with ``ENABLE_FEAT`` 202 mechanism. Default value is 0. 203 204 Note that Pointer Authentication is enabled for Non-secure world irrespective 205 of the value of this flag if the CPU supports it. 206 207- ``CTX_INCLUDE_SVE_REGS``: Boolean option that, when set to 1, will cause the 208 SVE registers to be included when saving and restoring the CPU context. Note 209 that this build option requires ``ENABLE_SVE_FOR_SWD`` to be enabled. In 210 general, it is recommended to perform SVE context management in lower ELs 211 and skip in EL3 due to the additional cost of maintaining large data 212 structures to track the SVE state. Hence, the default value is 0. 213 214- ``DEBUG``: Chooses between a debug and release build. It can take either 0 215 (release) or 1 (debug) as values. 0 is the default. 216 217- ``DECRYPTION_SUPPORT``: This build flag enables the user to select the 218 authenticated decryption algorithm to be used to decrypt firmware/s during 219 boot. It accepts 2 values: ``aes_gcm`` and ``none``. The default value of 220 this flag is ``none`` to disable firmware decryption which is an optional 221 feature as per TBBR. 222 223- ``DISABLE_BIN_GENERATION``: Boolean option to disable the generation 224 of the binary image. If set to 1, then only the ELF image is built. 225 0 is the default. 226 227- ``DISABLE_MTPMU``: Numeric option to disable ``FEAT_MTPMU`` (Multi Threaded 228 PMU). ``FEAT_MTPMU`` is an optional feature available on Armv8.6 onwards. 229 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 230 mechanism. Default is ``0``. 231 232- ``DYN_DISABLE_AUTH``: Provides the capability to dynamically disable Trusted 233 Board Boot authentication at runtime. This option is meant to be enabled only 234 for development platforms. ``TRUSTED_BOARD_BOOT`` flag must be set if this 235 flag has to be enabled. 0 is the default. 236 237- ``E``: Boolean option to make warnings into errors. Default is 1. 238 239 When specifying higher warnings levels (``W=1`` and higher), this option 240 defaults to 0. This is done to encourage contributors to use them, as they 241 are expected to produce warnings that would otherwise fail the build. New 242 contributions are still expected to build with ``W=0`` and ``E=1`` (the 243 default). 244 245- ``EARLY_CONSOLE``: This option is used to enable early traces before default 246 console is properly setup. It introduces EARLY_* traces macros, that will 247 use the non-EARLY traces macros if the flag is enabled, or do nothing 248 otherwise. To use this feature, platforms will have to create the function 249 plat_setup_early_console(). 250 Default is 0 (disabled) 251 252- ``EL3_PAYLOAD_BASE``: This option enables booting an EL3 payload instead of 253 the normal boot flow. It must specify the entry point address of the EL3 254 payload. Please refer to the "Booting an EL3 payload" section for more 255 details. 256 257- ``ENABLE_AMU_AUXILIARY_COUNTERS``: Enables support for AMU auxiliary counters 258 (also known as group 1 counters). These are implementation-defined counters, 259 and as such require additional platform configuration. Default is 0. 260 261- ``ENABLE_AMU_FCONF``: Enables configuration of the AMU through FCONF, which 262 allows platforms with auxiliary counters to describe them via the 263 ``HW_CONFIG`` device tree blob. Default is 0. 264 265- ``ENABLE_ASSERTIONS``: This option controls whether or not calls to ``assert()`` 266 are compiled out. For debug builds, this option defaults to 1, and calls to 267 ``assert()`` are left in place. For release builds, this option defaults to 0 268 and calls to ``assert()`` function are compiled out. This option can be set 269 independently of ``DEBUG``. It can also be used to hide any auxiliary code 270 that is only required for the assertion and does not fit in the assertion 271 itself. 272 273- ``ENABLE_BACKTRACE``: This option controls whether to enable backtrace 274 dumps or not. It is supported in both AArch64 and AArch32. However, in 275 AArch32 the format of the frame records are not defined in the AAPCS and they 276 are defined by the implementation. This implementation of backtrace only 277 supports the format used by GCC when T32 interworking is disabled. For this 278 reason enabling this option in AArch32 will force the compiler to only 279 generate A32 code. This option is enabled by default only in AArch64 debug 280 builds, but this behaviour can be overridden in each platform's Makefile or 281 in the build command line. 282 283- ``ENABLE_FEAT`` 284 The Arm architecture defines several architecture extension features, 285 named FEAT_xxx in the architecure manual. Some of those features require 286 setup code in higher exception levels, other features might be used by TF-A 287 code itself. 288 Most of the feature flags defined in the TF-A build system permit to take 289 the values 0, 1 or 2, with the following meaning: 290 291 :: 292 293 ENABLE_FEAT_* = 0: Feature is disabled statically at compile time. 294 ENABLE_FEAT_* = 1: Feature is enabled unconditionally at compile time. 295 ENABLE_FEAT_* = 2: Feature is enabled, but checked at runtime. 296 297 When setting the flag to 0, the feature is disabled during compilation, 298 and the compiler's optimisation stage and the linker will try to remove 299 as much of this code as possible. 300 If it is defined to 1, the code will use the feature unconditionally, so the 301 CPU is expected to support that feature. The FEATURE_DETECTION debug 302 feature, if enabled, will verify this. 303 If the feature flag is set to 2, support for the feature will be compiled 304 in, but its existence will be checked at runtime, so it works on CPUs with 305 or without the feature. This is mostly useful for platforms which either 306 support multiple different CPUs, or where the CPU is configured at runtime, 307 like in emulators. 308 309- ``ENABLE_FEAT_AMU``: Numeric value to enable Activity Monitor Unit 310 extensions. This flag can take the values 0 to 2, to align with the 311 ``ENABLE_FEAT`` mechanism. This is an optional architectural feature 312 available on v8.4 onwards. Some v8.2 implementations also implement an AMU 313 and this option can be used to enable this feature on those systems as well. 314 This flag can take the values 0 to 2, the default is 0. 315 316- ``ENABLE_FEAT_AMUv1p1``: Numeric value to enable the ``FEAT_AMUv1p1`` 317 extension. ``FEAT_AMUv1p1`` is an optional feature available on Arm v8.6 318 onwards. This flag can take the values 0 to 2, to align with the 319 ``ENABLE_FEAT`` mechanism. Default value is ``0``. 320 321- ``ENABLE_FEAT_CSV2_2``: Numeric value to enable the ``FEAT_CSV2_2`` 322 extension. It allows access to the SCXTNUM_EL2 (Software Context Number) 323 register during EL2 context save/restore operations. ``FEAT_CSV2_2`` is an 324 optional feature available on Arm v8.0 onwards. This flag can take values 325 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 326 Default value is ``0``. 327 328- ``ENABLE_FEAT_CSV2_3``: Numeric value to enable support for ``FEAT_CSV2_3`` 329 extension. This feature is supported in AArch64 state only and is an optional 330 feature available in Arm v8.0 implementations. 331 ``FEAT_CSV2_3`` implies the implementation of ``FEAT_CSV2_2``. 332 The flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 333 mechanism. Default value is ``0``. 334 335- ``ENABLE_FEAT_DEBUGV8P9``: Numeric value to enable ``FEAT_DEBUGV8P9`` 336 extension which allows the ability to implement more than 16 breakpoints 337 and/or watchpoints. This feature is mandatory from v8.9 and is optional 338 from v8.8. This flag can take the values of 0 to 2, to align with the 339 ``ENABLE_FEAT`` mechanism. Default value is ``0``. 340 341- ``ENABLE_FEAT_DIT``: Numeric value to enable ``FEAT_DIT`` (Data Independent 342 Timing) extension. It allows setting the ``DIT`` bit of PSTATE in EL3. 343 ``FEAT_DIT`` is a mandatory architectural feature and is enabled from v8.4 344 and upwards. This flag can take the values 0 to 2, to align with the 345 ``ENABLE_FEAT`` mechanism. Default value is ``0``. 346 347- ``ENABLE_FEAT_ECV``: Numeric value to enable support for the Enhanced Counter 348 Virtualization feature, allowing for access to the CNTPOFF_EL2 (Counter-timer 349 Physical Offset register) during EL2 to EL3 context save/restore operations. 350 Its a mandatory architectural feature and is enabled from v8.6 and upwards. 351 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 352 mechanism. Default value is ``0``. 353 354- ``ENABLE_FEAT_FPMR``: Numerical value to enable support for Floating Point 355 Mode Register feature, allowing access to the FPMR register. FPMR register 356 controls the behaviors of FP8 instructions. It is an optional architectural 357 feature from v9.2 and upwards. This flag can take value of 0 to 2, to align 358 with the ``FEATURE_DETECTION`` mechanism. Default value is ``0``. 359 360- ``ENABLE_FEAT_FGT``: Numeric value to enable support for FGT (Fine Grain Traps) 361 feature allowing for access to the HDFGRTR_EL2 (Hypervisor Debug Fine-Grained 362 Read Trap Register) during EL2 to EL3 context save/restore operations. 363 Its a mandatory architectural feature and is enabled from v8.6 and upwards. 364 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 365 mechanism. Default value is ``0``. 366 367- ``ENABLE_FEAT_FGT2``: Numeric value to enable support for FGT2 368 (Fine Grain Traps 2) feature allowing for access to Fine-grained trap 2 registers 369 during EL2 to EL3 context save/restore operations. 370 Its an optional architectural feature and is available from v8.8 and upwards. 371 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 372 mechanism. Default value is ``0``. 373 374- ``ENABLE_FEAT_HCX``: Numeric value to set the bit SCR_EL3.HXEn in EL3 to 375 allow access to HCRX_EL2 (extended hypervisor control register) from EL2 as 376 well as adding HCRX_EL2 to the EL2 context save/restore operations. Its a 377 mandatory architectural feature and is enabled from v8.7 and upwards. This 378 flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 379 mechanism. Default value is ``0``. 380 381- ``ENABLE_FEAT_MTE2``: Numeric value to enable Memory Tagging Extension2 382 if the platform wants to use this feature and MTE2 is enabled at ELX. 383 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 384 mechanism. Default value is ``0``. 385 386- ``ENABLE_FEAT_PAN``: Numeric value to enable the ``FEAT_PAN`` (Privileged 387 Access Never) extension. ``FEAT_PAN`` adds a bit to PSTATE, generating a 388 permission fault for any privileged data access from EL1/EL2 to virtual 389 memory address, accessible at EL0, provided (HCR_EL2.E2H=1). It is a 390 mandatory architectural feature and is enabled from v8.1 and upwards. This 391 flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 392 mechanism. Default value is ``0``. 393 394- ``ENABLE_FEAT_RNG``: Numeric value to enable the ``FEAT_RNG`` extension. 395 ``FEAT_RNG`` is an optional feature available on Arm v8.5 onwards. This 396 flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 397 mechanism. Default value is ``0``. 398 399- ``ENABLE_FEAT_RNG_TRAP``: Numeric value to enable the ``FEAT_RNG_TRAP`` 400 extension. This feature is only supported in AArch64 state. This flag can 401 take values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 402 Default value is ``0``. ``FEAT_RNG_TRAP`` is an optional feature from 403 Armv8.5 onwards. 404 405- ``ENABLE_FEAT_SB``: Boolean option to let the TF-A code use the ``FEAT_SB`` 406 (Speculation Barrier) instruction ``FEAT_SB`` is an optional feature and 407 defaults to ``0`` for pre-Armv8.5 CPUs, but is mandatory for Armv8.5 or 408 later CPUs. It is enabled from v8.5 and upwards and if needed can be 409 overidden from platforms explicitly. 410 411- ``ENABLE_FEAT_SEL2``: Numeric value to enable the ``FEAT_SEL2`` (Secure EL2) 412 extension. ``FEAT_SEL2`` is a mandatory feature available on Arm v8.4. 413 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 414 mechanism. Default is ``0``. 415 416- ``ENABLE_FEAT_TWED``: Numeric value to enable the ``FEAT_TWED`` (Delayed 417 trapping of WFE Instruction) extension. ``FEAT_TWED`` is a optional feature 418 available on Arm v8.6. This flag can take values 0 to 2, to align with the 419 ``ENABLE_FEAT`` mechanism. Default is ``0``. 420 421 When ``ENABLE_FEAT_TWED`` is set to ``1``, WFE instruction trapping gets 422 delayed by the amount of value in ``TWED_DELAY``. 423 424- ``ENABLE_FEAT_VHE``: Numeric value to enable the ``FEAT_VHE`` (Virtualization 425 Host Extensions) extension. It allows access to CONTEXTIDR_EL2 register 426 during EL2 context save/restore operations.``FEAT_VHE`` is a mandatory 427 architectural feature and is enabled from v8.1 and upwards. It can take 428 values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 429 Default value is ``0``. 430 431- ``ENABLE_FEAT_TCR2``: Numeric value to set the bit SCR_EL3.ENTCR2 in EL3 to 432 allow access to TCR2_EL2 (extended translation control) from EL2 as 433 well as adding TCR2_EL2 to the EL2 context save/restore operations. Its a 434 mandatory architectural feature and is enabled from v8.9 and upwards. This 435 flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 436 mechanism. Default value is ``0``. 437 438- ``ENABLE_FEAT_S2PIE``: Numeric value to enable support for FEAT_S2PIE 439 at EL2 and below, and context switch relevant registers. This flag 440 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 441 mechanism. Default value is ``0``. 442 443- ``ENABLE_FEAT_S1PIE``: Numeric value to enable support for FEAT_S1PIE 444 at EL2 and below, and context switch relevant registers. This flag 445 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 446 mechanism. Default value is ``0``. 447 448- ``ENABLE_FEAT_S2POE``: Numeric value to enable support for FEAT_S2POE 449 at EL2 and below, and context switch relevant registers. This flag 450 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 451 mechanism. Default value is ``0``. 452 453- ``ENABLE_FEAT_S1POE``: Numeric value to enable support for FEAT_S1POE 454 at EL2 and below, and context switch relevant registers. This flag 455 can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 456 mechanism. Default value is ``0``. 457 458- ``ENABLE_FEAT_GCS``: Numeric value to set the bit SCR_EL3.GCSEn in EL3 to 459 allow use of Guarded Control Stack from EL2 as well as adding the GCS 460 registers to the EL2 context save/restore operations. This flag can take 461 the values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 462 Default value is ``0``. 463 464- ``ENABLE_FEAT_THE``: Numeric value to enable support for FEAT_THE 465 (Translation Hardening Extension) at EL2 and below, setting the bit 466 SCR_EL3.RCWMASKEn in EL3 to allow access to RCWMASK_EL1 and RCWSMASK_EL1 467 registers and context switch them. 468 Its an optional architectural feature and is available from v8.8 and upwards. 469 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 470 mechanism. Default value is ``0``. 471 472- ``ENABLE_FEAT_SCTLR2``: Numeric value to enable support for FEAT_SCTLR2 473 (Extension to SCTLR_ELx) at EL2 and below, setting the bit 474 SCR_EL3.SCTLR2En in EL3 to allow access to SCTLR2_ELx registers and 475 context switch them. This feature is OPTIONAL from Armv8.0 implementations 476 and mandatory in Armv8.9 implementations. 477 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 478 mechanism. Default value is ``0``. 479 480- ``ENABLE_FEAT_D128``: Numeric value to enable support for FEAT_D128 481 at EL2 and below, setting the bit SCT_EL3.D128En in EL3 to allow access to 482 128 bit version of system registers like PAR_EL1, TTBR0_EL1, TTBR1_EL1, 483 TTBR0_EL2, TTBR1_EL2, TTBR0_EL12, TTBR1_EL12 , VTTBR_EL2, RCWMASK_EL1, and 484 RCWSMASK_EL1. Its an optional architectural feature and is available from 485 9.3 and upwards. 486 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 487 mechanism. Default value is ``0``. 488 489- ``ENABLE_LTO``: Boolean option to enable Link Time Optimization (LTO) 490 support in GCC for TF-A. This option is currently only supported for 491 AArch64. Default is 0. 492 493- ``ENABLE_FEAT_MPAM``: Numeric value to enable lower ELs to use MPAM 494 feature. MPAM is an optional Armv8.4 extension that enables various memory 495 system components and resources to define partitions; software running at 496 various ELs can assign themselves to desired partition to control their 497 performance aspects. 498 499 This flag can take values 0 to 2, to align with the ``ENABLE_FEAT`` 500 mechanism. When this option is set to ``1`` or ``2``, EL3 allows lower ELs to 501 access their own MPAM registers without trapping into EL3. This option 502 doesn't make use of partitioning in EL3, however. Platform initialisation 503 code should configure and use partitions in EL3 as required. This option 504 defaults to ``2`` since MPAM is enabled by default for NS world only. 505 The flag is automatically disabled when the target 506 architecture is AArch32. 507 508- ``ENABLE_FEAT_LS64_ACCDATA``: Numeric value to enable access and save and 509 restore the ACCDATA_EL1 system register, at EL2 and below. This flag can 510 take the values 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. 511 Default value is ``0``. 512 513- ``ENABLE_MPMM``: Boolean option to enable support for the Maximum Power 514 Mitigation Mechanism supported by certain Arm cores, which allows the SoC 515 firmware to detect and limit high activity events to assist in SoC processor 516 power domain dynamic power budgeting and limit the triggering of whole-rail 517 (i.e. clock chopping) responses to overcurrent conditions. Defaults to ``0``. 518 519- ``ENABLE_MPMM_FCONF``: Enables configuration of MPMM through FCONF, which 520 allows platforms with cores supporting MPMM to describe them via the 521 ``HW_CONFIG`` device tree blob. Default is 0. 522 523- ``ENABLE_PIE``: Boolean option to enable Position Independent Executable(PIE) 524 support within generic code in TF-A. This option is currently only supported 525 in BL2, BL31, and BL32 (TSP) for AARCH64 binaries, and 526 in BL32 (SP_min) for AARCH32. Default is 0. 527 528- ``ENABLE_PMF``: Boolean option to enable support for optional Performance 529 Measurement Framework(PMF). Default is 0. 530 531- ``ENABLE_PSCI_STAT``: Boolean option to enable support for optional PSCI 532 functions ``PSCI_STAT_RESIDENCY`` and ``PSCI_STAT_COUNT``. Default is 0. 533 In the absence of an alternate stat collection backend, ``ENABLE_PMF`` must 534 be enabled. If ``ENABLE_PMF`` is set, the residency statistics are tracked in 535 software. 536 537- ``ENABLE_RUNTIME_INSTRUMENTATION``: Boolean option to enable runtime 538 instrumentation which injects timestamp collection points into TF-A to 539 allow runtime performance to be measured. Currently, only PSCI is 540 instrumented. Enabling this option enables the ``ENABLE_PMF`` build option 541 as well. Default is 0. 542 543- ``ENABLE_SPE_FOR_NS`` : Numeric value to enable Statistical Profiling 544 extensions. This is an optional architectural feature for AArch64. 545 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 546 mechanism. The default is 2 but is automatically disabled when the target 547 architecture is AArch32. 548 549- ``ENABLE_SVE_FOR_NS``: Numeric value to enable Scalable Vector Extension 550 (SVE) for the Non-secure world only. SVE is an optional architectural feature 551 for AArch64. This flag can take the values 0 to 2, to align with the 552 ``ENABLE_FEAT`` mechanism. At this time, this build option cannot be used on 553 systems that have SPM_MM enabled. The default value is 2. 554 555 Note that when SVE is enabled for the Non-secure world, access 556 to SVE, SIMD and floating-point functionality from the Secure world is 557 independently controlled by build option ``ENABLE_SVE_FOR_SWD``. When enabling 558 ``CTX_INCLUDE_FPREGS`` and ``ENABLE_SVE_FOR_NS`` together, it is mandatory to 559 enable ``CTX_INCLUDE_SVE_REGS``. This is to avoid corruption of the Non-secure 560 world data in the Z-registers which are aliased by the SIMD and FP registers. 561 562- ``ENABLE_SVE_FOR_SWD``: Boolean option to enable SVE and FPU/SIMD functionality 563 for the Secure world. SVE is an optional architectural feature for AArch64. 564 The default is 0 and it is automatically disabled when the target architecture 565 is AArch32. 566 567 .. note:: 568 This build flag requires ``ENABLE_SVE_FOR_NS`` to be enabled. When enabling 569 ``ENABLE_SVE_FOR_SWD``, a developer must carefully consider whether 570 ``CTX_INCLUDE_SVE_REGS`` is also needed. 571 572- ``ENABLE_STACK_PROTECTOR``: String option to enable the stack protection 573 checks in GCC. Allowed values are "all", "strong", "default" and "none". The 574 default value is set to "none". "strong" is the recommended stack protection 575 level if this feature is desired. "none" disables the stack protection. For 576 all values other than "none", the ``plat_get_stack_protector_canary()`` 577 platform hook needs to be implemented. The value is passed as the last 578 component of the option ``-fstack-protector-$ENABLE_STACK_PROTECTOR``. 579 580- ``ENCRYPT_BL31``: Binary flag to enable encryption of BL31 firmware. This 581 flag depends on ``DECRYPTION_SUPPORT`` build flag. 582 583- ``ENCRYPT_BL32``: Binary flag to enable encryption of Secure BL32 payload. 584 This flag depends on ``DECRYPTION_SUPPORT`` build flag. 585 586- ``ENC_KEY``: A 32-byte (256-bit) symmetric key in hex string format. It could 587 either be SSK or BSSK depending on ``FW_ENC_STATUS`` flag. This value depends 588 on ``DECRYPTION_SUPPORT`` build flag. 589 590- ``ENC_NONCE``: A 12-byte (96-bit) encryption nonce or Initialization Vector 591 (IV) in hex string format. This value depends on ``DECRYPTION_SUPPORT`` 592 build flag. 593 594- ``ERROR_DEPRECATED``: This option decides whether to treat the usage of 595 deprecated platform APIs, helper functions or drivers within Trusted 596 Firmware as error. It can take the value 1 (flag the use of deprecated 597 APIs as error) or 0. The default is 0. 598 599- ``ETHOSN_NPU_DRIVER``: boolean option to enable a SiP service that can 600 configure an Arm® Ethos™-N NPU. To use this service the target platform's 601 ``HW_CONFIG`` must include the device tree nodes for the NPU. Currently, only 602 the Arm Juno platform has this included in its ``HW_CONFIG`` and the platform 603 only loads the ``HW_CONFIG`` in AArch64 builds. Default is 0. 604 605- ``ETHOSN_NPU_TZMP1``: boolean option to enable TZMP1 support for the 606 Arm® Ethos™-N NPU. Requires ``ETHOSN_NPU_DRIVER`` and 607 ``TRUSTED_BOARD_BOOT`` to be enabled. 608 609- ``ETHOSN_NPU_FW``: location of the NPU firmware binary 610 (```ethosn.bin```). This firmware image will be included in the FIP and 611 loaded at runtime. 612 613- ``EL3_EXCEPTION_HANDLING``: When set to ``1``, enable handling of exceptions 614 targeted at EL3. When set ``0`` (default), no exceptions are expected or 615 handled at EL3, and a panic will result. The exception to this rule is when 616 ``SPMD_SPM_AT_SEL2`` is set to ``1``, in which case, only exceptions 617 occuring during normal world execution, are trapped to EL3. Any exception 618 trapped during secure world execution are trapped to the SPMC. This is 619 supported only for AArch64 builds. 620 621- ``EVENT_LOG_LEVEL``: Chooses the log level to use for Measured Boot when 622 ``MEASURED_BOOT`` is enabled. For a list of valid values, see ``LOG_LEVEL``. 623 Default value is 40 (LOG_LEVEL_INFO). 624 625- ``FAULT_INJECTION_SUPPORT``: ARMv8.4 extensions introduced support for fault 626 injection from lower ELs, and this build option enables lower ELs to use 627 Error Records accessed via System Registers to inject faults. This is 628 applicable only to AArch64 builds. 629 630 This feature is intended for testing purposes only, and is advisable to keep 631 disabled for production images. 632 633- ``FIP_NAME``: This is an optional build option which specifies the FIP 634 filename for the ``fip`` target. Default is ``fip.bin``. 635 636- ``FWU_FIP_NAME``: This is an optional build option which specifies the FWU 637 FIP filename for the ``fwu_fip`` target. Default is ``fwu_fip.bin``. 638 639- ``FW_ENC_STATUS``: Top level firmware's encryption numeric flag, values: 640 641 :: 642 643 0: Encryption is done with Secret Symmetric Key (SSK) which is common 644 for a class of devices. 645 1: Encryption is done with Binding Secret Symmetric Key (BSSK) which is 646 unique per device. 647 648 This flag depends on ``DECRYPTION_SUPPORT`` build flag. 649 650- ``GENERATE_COT``: Boolean flag used to build and execute the ``cert_create`` 651 tool to create certificates as per the Chain of Trust described in 652 :ref:`Trusted Board Boot`. The build system then calls ``fiptool`` to 653 include the certificates in the FIP and FWU_FIP. Default value is '0'. 654 655 Specify both ``TRUSTED_BOARD_BOOT=1`` and ``GENERATE_COT=1`` to include support 656 for the Trusted Board Boot feature in the BL1 and BL2 images, to generate 657 the corresponding certificates, and to include those certificates in the 658 FIP and FWU_FIP. 659 660 Note that if ``TRUSTED_BOARD_BOOT=0`` and ``GENERATE_COT=1``, the BL1 and BL2 661 images will not include support for Trusted Board Boot. The FIP will still 662 include the corresponding certificates. This FIP can be used to verify the 663 Chain of Trust on the host machine through other mechanisms. 664 665 Note that if ``TRUSTED_BOARD_BOOT=1`` and ``GENERATE_COT=0``, the BL1 and BL2 666 images will include support for Trusted Board Boot, but the FIP and FWU_FIP 667 will not include the corresponding certificates, causing a boot failure. 668 669- ``GICV2_G0_FOR_EL3``: Unlike GICv3, the GICv2 architecture doesn't have 670 inherent support for specific EL3 type interrupts. Setting this build option 671 to ``1`` assumes GICv2 *Group 0* interrupts are expected to target EL3, both 672 by :ref:`platform abstraction layer<platform Interrupt Controller API>` and 673 :ref:`Interrupt Management Framework<Interrupt Management Framework>`. 674 This allows GICv2 platforms to enable features requiring EL3 interrupt type. 675 This also means that all GICv2 Group 0 interrupts are delivered to EL3, and 676 the Secure Payload interrupts needs to be synchronously handed over to Secure 677 EL1 for handling. The default value of this option is ``0``, which means the 678 Group 0 interrupts are assumed to be handled by Secure EL1. 679 680- ``HANDLE_EA_EL3_FIRST_NS``: When set to ``1``, External Aborts and SError 681 Interrupts, resulting from errors in NS world, will be always trapped in 682 EL3 i.e. in BL31 at runtime. When set to ``0`` (default), these exceptions 683 will be trapped in the current exception level (or in EL1 if the current 684 exception level is EL0). 685 686- ``HW_ASSISTED_COHERENCY``: On most Arm systems to-date, platform-specific 687 software operations are required for CPUs to enter and exit coherency. 688 However, newer systems exist where CPUs' entry to and exit from coherency 689 is managed in hardware. Such systems require software to only initiate these 690 operations, and the rest is managed in hardware, minimizing active software 691 management. In such systems, this boolean option enables TF-A to carry out 692 build and run-time optimizations during boot and power management operations. 693 This option defaults to 0 and if it is enabled, then it implies 694 ``WARMBOOT_ENABLE_DCACHE_EARLY`` is also enabled. 695 696 If this flag is disabled while the platform which TF-A is compiled for 697 includes cores that manage coherency in hardware, then a compilation error is 698 generated. This is based on the fact that a system cannot have, at the same 699 time, cores that manage coherency in hardware and cores that don't. In other 700 words, a platform cannot have, at the same time, cores that require 701 ``HW_ASSISTED_COHERENCY=1`` and cores that require 702 ``HW_ASSISTED_COHERENCY=0``. 703 704 Note that, when ``HW_ASSISTED_COHERENCY`` is enabled, version 2 of 705 translation library (xlat tables v2) must be used; version 1 of translation 706 library is not supported. 707 708- ``IMPDEF_SYSREG_TRAP``: Numeric value to enable the handling traps for 709 implementation defined system register accesses from lower ELs. Default 710 value is ``0``. 711 712- ``INVERTED_MEMMAP``: memmap tool print by default lower addresses at the 713 bottom, higher addresses at the top. This build flag can be set to '1' to 714 invert this behavior. Lower addresses will be printed at the top and higher 715 addresses at the bottom. 716 717- ``INIT_UNUSED_NS_EL2``: This build flag guards code that disables EL2 718 safely in scenario where NS-EL2 is present but unused. This flag is set to 0 719 by default. Platforms without NS-EL2 in use must enable this flag. 720 721- ``KEY_ALG``: This build flag enables the user to select the algorithm to be 722 used for generating the PKCS keys and subsequent signing of the certificate. 723 It accepts 5 values: ``rsa``, ``rsa_1_5``, ``ecdsa``, ``ecdsa-brainpool-regular`` 724 and ``ecdsa-brainpool-twisted``. The option ``rsa_1_5`` is the legacy PKCS#1 725 RSA 1.5 algorithm which is not TBBR compliant and is retained only for 726 compatibility. The default value of this flag is ``rsa`` which is the TBBR 727 compliant PKCS#1 RSA 2.1 scheme. 728 729- ``KEY_SIZE``: This build flag enables the user to select the key size for 730 the algorithm specified by ``KEY_ALG``. The valid values for ``KEY_SIZE`` 731 depend on the chosen algorithm and the cryptographic module. 732 733 +---------------------------+------------------------------------+ 734 | KEY_ALG | Possible key sizes | 735 +===========================+====================================+ 736 | rsa | 1024 , 2048 (default), 3072, 4096 | 737 +---------------------------+------------------------------------+ 738 | ecdsa | 256 (default), 384 | 739 +---------------------------+------------------------------------+ 740 | ecdsa-brainpool-regular | 256 (default) | 741 +---------------------------+------------------------------------+ 742 | ecdsa-brainpool-twisted | 256 (default) | 743 +---------------------------+------------------------------------+ 744 745- ``HASH_ALG``: This build flag enables the user to select the secure hash 746 algorithm. It accepts 3 values: ``sha256``, ``sha384`` and ``sha512``. 747 The default value of this flag is ``sha256``. 748 749- ``LDFLAGS``: Extra user options appended to the linkers' command line in 750 addition to the one set by the build system. 751 752- ``LOG_LEVEL``: Chooses the log level, which controls the amount of console log 753 output compiled into the build. This should be one of the following: 754 755 :: 756 757 0 (LOG_LEVEL_NONE) 758 10 (LOG_LEVEL_ERROR) 759 20 (LOG_LEVEL_NOTICE) 760 30 (LOG_LEVEL_WARNING) 761 40 (LOG_LEVEL_INFO) 762 50 (LOG_LEVEL_VERBOSE) 763 764 All log output up to and including the selected log level is compiled into 765 the build. The default value is 40 in debug builds and 20 in release builds. 766 767- ``MEASURED_BOOT``: Boolean flag to include support for the Measured Boot 768 feature. This flag can be enabled with ``TRUSTED_BOARD_BOOT`` in order to 769 provide trust that the code taking the measurements and recording them has 770 not been tampered with. 771 772 This option defaults to 0. 773 774- ``MARCH_DIRECTIVE``: used to pass a -march option from the platform build 775 options to the compiler. An example usage: 776 777 .. code:: make 778 779 MARCH_DIRECTIVE := -march=armv8.5-a 780 781- ``HARDEN_SLS``: used to pass -mharden-sls=all from the TF-A build 782 options to the compiler currently supporting only of the options. 783 GCC documentation: 784 https://gcc.gnu.org/onlinedocs/gcc/AArch64-Options.html#index-mharden-sls 785 786 An example usage: 787 788 .. code:: make 789 790 HARDEN_SLS := 1 791 792 This option defaults to 0. 793 794- ``NON_TRUSTED_WORLD_KEY``: This option is used when ``GENERATE_COT=1``. It 795 specifies a file that contains the Non-Trusted World private key in PEM 796 format or a PKCS11 URI. If ``SAVE_KEYS=1``, only a file is accepted and it 797 will be used to save the key. 798 799- ``NS_BL2U``: Path to NS_BL2U image in the host file system. This image is 800 optional. It is only needed if the platform makefile specifies that it 801 is required in order to build the ``fwu_fip`` target. 802 803- ``NS_TIMER_SWITCH``: Enable save and restore for non-secure timer register 804 contents upon world switch. It can take either 0 (don't save and restore) or 805 1 (do save and restore). 0 is the default. An SPD may set this to 1 if it 806 wants the timer registers to be saved and restored. 807 808- ``OVERRIDE_LIBC``: This option allows platforms to override the default libc 809 for the BL image. It can be either 0 (include) or 1 (remove). The default 810 value is 0. 811 812- ``PL011_GENERIC_UART``: Boolean option to indicate the PL011 driver that 813 the underlying hardware is not a full PL011 UART but a minimally compliant 814 generic UART, which is a subset of the PL011. The driver will not access 815 any register that is not part of the SBSA generic UART specification. 816 Default value is 0 (a full PL011 compliant UART is present). 817 818- ``PLAT``: Choose a platform to build TF-A for. The chosen platform name 819 must be subdirectory of any depth under ``plat/``, and must contain a 820 platform makefile named ``platform.mk``. For example, to build TF-A for the 821 Arm Juno board, select PLAT=juno. 822 823- ``PLATFORM_REPORT_CTX_MEM_USE``: Reports the context memory allocated for 824 each core as well as the global context. The data includes the memory used 825 by each world and each privileged exception level. This build option is 826 applicable only for ``ARCH=aarch64`` builds. The default value is 0. 827 828- ``PRELOADED_BL33_BASE``: This option enables booting a preloaded BL33 image 829 instead of the normal boot flow. When defined, it must specify the entry 830 point address for the preloaded BL33 image. This option is incompatible with 831 ``EL3_PAYLOAD_BASE``. If both are defined, ``EL3_PAYLOAD_BASE`` has priority 832 over ``PRELOADED_BL33_BASE``. 833 834- ``PRESERVE_DSU_PMU_REGS``: This options when enabled allows the platform to 835 save/restore the DynamIQ Shared Unit's(DSU) Performance Monitoring Unit(PMU) 836 registers when the cluster goes through a power cycle. This is disabled by 837 default and platforms that require this feature have to enable them. 838 839- ``PROGRAMMABLE_RESET_ADDRESS``: This option indicates whether the reset 840 vector address can be programmed or is fixed on the platform. It can take 841 either 0 (fixed) or 1 (programmable). Default is 0. If the platform has a 842 programmable reset address, it is expected that a CPU will start executing 843 code directly at the right address, both on a cold and warm reset. In this 844 case, there is no need to identify the entrypoint on boot and the boot path 845 can be optimised. The ``plat_get_my_entrypoint()`` platform porting interface 846 does not need to be implemented in this case. 847 848- ``PSCI_EXTENDED_STATE_ID``: As per PSCI1.0 Specification, there are 2 formats 849 possible for the PSCI power-state parameter: original and extended State-ID 850 formats. This flag if set to 1, configures the generic PSCI layer to use the 851 extended format. The default value of this flag is 0, which means by default 852 the original power-state format is used by the PSCI implementation. This flag 853 should be specified by the platform makefile and it governs the return value 854 of PSCI_FEATURES API for CPU_SUSPEND smc function id. When this option is 855 enabled on Arm platforms, the option ``ARM_RECOM_STATE_ID_ENC`` needs to be 856 set to 1 as well. 857 858- ``PSCI_OS_INIT_MODE``: Boolean flag to enable support for optional PSCI 859 OS-initiated mode. This option defaults to 0. 860 861- ``ARCH_FEATURE_AVAILABILITY``: Boolean flag to enable support for the 862 optional SMCCC_ARCH_FEATURE_AVAILABILITY call. This option implicitly 863 interacts with IMPDEF_SYSREG_TRAP and software emulation. This option 864 defaults to 0. 865 866- ``ENABLE_FEAT_RAS``: Boolean flag to enable Armv8.2 RAS features. RAS features 867 are an optional extension for pre-Armv8.2 CPUs, but are mandatory for Armv8.2 868 or later CPUs. This flag can take the values 0 or 1. The default value is 0. 869 NOTE: This flag enables use of IESB capability to reduce entry latency into 870 EL3 even when RAS error handling is not performed on the platform. Hence this 871 flag is recommended to be turned on Armv8.2 and later CPUs. 872 873- ``RESET_TO_BL31``: Enable BL31 entrypoint as the CPU reset vector instead 874 of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 875 entrypoint) or 1 (CPU reset to BL31 entrypoint). 876 The default value is 0. 877 878- ``RESET_TO_SP_MIN``: SP_MIN is the minimal AArch32 Secure Payload provided 879 in TF-A. This flag configures SP_MIN entrypoint as the CPU reset vector 880 instead of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 881 entrypoint) or 1 (CPU reset to SP_MIN entrypoint). The default value is 0. 882 883- ``RME_GPT_BITLOCK_BLOCK``: This defines the block size (in number of 512MB 884- blocks) covered by a single bit of the bitlock structure during RME GPT 885- operations. The lower the block size, the better opportunity for 886- parallelising GPT operations but at the cost of more bits being needed 887- for the bitlock structure. This numeric parameter can take the values 888- from 0 to 512 and must be a power of 2. The value of 0 is special and 889- and it chooses a single spinlock for all GPT L1 table entries. Default 890- value is 1 which corresponds to block size of 512MB per bit of bitlock 891- structure. 892 893- ``RME_GPT_MAX_BLOCK``: Numeric value in MB to define the maximum size of 894 supported contiguous blocks in GPT Library. This parameter can take the 895 values 0, 2, 32 and 512. Setting this value to 0 disables use of Contigious 896 descriptors. Default value is 512. 897 898- ``ROT_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 899 file that contains the ROT private key in PEM format or a PKCS11 URI and 900 enforces public key hash generation. If ``SAVE_KEYS=1``, only a file is 901 accepted and it will be used to save the key. 902 903- ``SAVE_KEYS``: This option is used when ``GENERATE_COT=1``. It tells the 904 certificate generation tool to save the keys used to establish the Chain of 905 Trust. Allowed options are '0' or '1'. Default is '0' (do not save). 906 907- ``SCP_BL2``: Path to SCP_BL2 image in the host file system. This image is optional. 908 If a SCP_BL2 image is present then this option must be passed for the ``fip`` 909 target. 910 911- ``SCP_BL2_KEY``: This option is used when ``GENERATE_COT=1``. It specifies a 912 file that contains the SCP_BL2 private key in PEM format or a PKCS11 URI. 913 If ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key. 914 915- ``SCP_BL2U``: Path to SCP_BL2U image in the host file system. This image is 916 optional. It is only needed if the platform makefile specifies that it 917 is required in order to build the ``fwu_fip`` target. 918 919- ``SDEI_SUPPORT``: Setting this to ``1`` enables support for Software 920 Delegated Exception Interface to BL31 image. This defaults to ``0``. 921 922 When set to ``1``, the build option ``EL3_EXCEPTION_HANDLING`` must also be 923 set to ``1``. 924 925- ``SEPARATE_CODE_AND_RODATA``: Whether code and read-only data should be 926 isolated on separate memory pages. This is a trade-off between security and 927 memory usage. See "Isolating code and read-only data on separate memory 928 pages" section in :ref:`Firmware Design`. This flag is disabled by default 929 and affects all BL images. 930 931- ``SEPARATE_NOBITS_REGION``: Setting this option to ``1`` allows the NOBITS 932 sections of BL31 (.bss, stacks, page tables, and coherent memory) to be 933 allocated in RAM discontiguous from the loaded firmware image. When set, the 934 platform is expected to provide definitions for ``BL31_NOBITS_BASE`` and 935 ``BL31_NOBITS_LIMIT``. When the option is ``0`` (the default), NOBITS 936 sections are placed in RAM immediately following the loaded firmware image. 937 938- ``SEPARATE_BL2_NOLOAD_REGION``: Setting this option to ``1`` allows the 939 NOLOAD sections of BL2 (.bss, stacks, page tables) to be allocated in RAM 940 discontiguous from loaded firmware images. When set, the platform need to 941 provide definitions of ``BL2_NOLOAD_START`` and ``BL2_NOLOAD_LIMIT``. This 942 flag is disabled by default and NOLOAD sections are placed in RAM immediately 943 following the loaded firmware image. 944 945- ``SEPARATE_SIMD_SECTION``: Setting this option to ``1`` allows the SIMD context 946 data structures to be put in a dedicated memory region as decided by platform 947 integrator. Default value is ``0`` which means the SIMD context is put in BSS 948 section of EL3 firmware. 949 950- ``SMC_PCI_SUPPORT``: This option allows platforms to handle PCI configuration 951 access requests via a standard SMCCC defined in `DEN0115`_. When combined with 952 UEFI+ACPI this can provide a certain amount of OS forward compatibility 953 with newer platforms that aren't ECAM compliant. 954 955- ``SPD``: Choose a Secure Payload Dispatcher component to be built into TF-A. 956 This build option is only valid if ``ARCH=aarch64``. The value should be 957 the path to the directory containing the SPD source, relative to 958 ``services/spd/``; the directory is expected to contain a makefile called 959 ``<spd-value>.mk``. The SPM Dispatcher standard service is located in 960 services/std_svc/spmd and enabled by ``SPD=spmd``. The SPM Dispatcher 961 cannot be enabled when the ``SPM_MM`` option is enabled. 962 963- ``SPIN_ON_BL1_EXIT``: This option introduces an infinite loop in BL1. It can 964 take either 0 (no loop) or 1 (add a loop). 0 is the default. This loop stops 965 execution in BL1 just before handing over to BL31. At this point, all 966 firmware images have been loaded in memory, and the MMU and caches are 967 turned off. Refer to the "Debugging options" section for more details. 968 969- ``SPMC_AT_EL3`` : This boolean option is used jointly with the SPM 970 Dispatcher option (``SPD=spmd``). When enabled (1) it indicates the SPMC 971 component runs at the EL3 exception level. The default value is ``0`` ( 972 disabled). This configuration supports pre-Armv8.4 platforms (aka not 973 implementing the ``FEAT_SEL2`` extension). 974 975- ``SPMC_AT_EL3_SEL0_SP`` : Boolean option to enable SEL0 SP load support when 976 ``SPMC_AT_EL3`` is enabled. The default value if ``0`` (disabled). This 977 option cannot be enabled (``1``) when (``SPMC_AT_EL3``) is disabled. 978 979- ``SPMC_OPTEE`` : This boolean option is used jointly with the SPM 980 Dispatcher option (``SPD=spmd``) and with ``SPMD_SPM_AT_SEL2=0`` to 981 indicate that the SPMC at S-EL1 is OP-TEE and an OP-TEE specific loading 982 mechanism should be used. 983 984- ``SPMD_SPM_AT_SEL2`` : This boolean option is used jointly with the SPM 985 Dispatcher option (``SPD=spmd``). When enabled (1) it indicates the SPMC 986 component runs at the S-EL2 exception level provided by the ``FEAT_SEL2`` 987 extension. This is the default when enabling the SPM Dispatcher. When 988 disabled (0) it indicates the SPMC component runs at the S-EL1 execution 989 state or at EL3 if ``SPMC_AT_EL3`` is enabled. The latter configurations 990 support pre-Armv8.4 platforms (aka not implementing the ``FEAT_SEL2`` 991 extension). 992 993- ``SPM_MM`` : Boolean option to enable the Management Mode (MM)-based Secure 994 Partition Manager (SPM) implementation. The default value is ``0`` 995 (disabled). This option cannot be enabled (``1``) when SPM Dispatcher is 996 enabled (``SPD=spmd``). 997 998- ``SP_LAYOUT_FILE``: Platform provided path to JSON file containing the 999 description of secure partitions. The build system will parse this file and 1000 package all secure partition blobs into the FIP. This file is not 1001 necessarily part of TF-A tree. Only available when ``SPD=spmd``. 1002 1003- ``SP_MIN_WITH_SECURE_FIQ``: Boolean flag to indicate the SP_MIN handles 1004 secure interrupts (caught through the FIQ line). Platforms can enable 1005 this directive if they need to handle such interruption. When enabled, 1006 the FIQ are handled in monitor mode and non secure world is not allowed 1007 to mask these events. Platforms that enable FIQ handling in SP_MIN shall 1008 implement the api ``sp_min_plat_fiq_handler()``. The default value is 0. 1009 1010- ``SVE_VECTOR_LEN``: SVE vector length to configure in ZCR_EL3. 1011 Platforms can configure this if they need to lower the hardware 1012 limit, for example due to asymmetric configuration or limitations of 1013 software run at lower ELs. The default is the architectural maximum 1014 of 2048 which should be suitable for most configurations, the 1015 hardware will limit the effective VL to the maximum physically supported 1016 VL. 1017 1018- ``TRNG_SUPPORT``: Setting this to ``1`` enables support for True 1019 Random Number Generator Interface to BL31 image. This defaults to ``0``. 1020 1021- ``TRUSTED_BOARD_BOOT``: Boolean flag to include support for the Trusted Board 1022 Boot feature. When set to '1', BL1 and BL2 images include support to load 1023 and verify the certificates and images in a FIP, and BL1 includes support 1024 for the Firmware Update. The default value is '0'. Generation and inclusion 1025 of certificates in the FIP and FWU_FIP depends upon the value of the 1026 ``GENERATE_COT`` option. 1027 1028 .. warning:: 1029 This option depends on ``CREATE_KEYS`` to be enabled. If the keys 1030 already exist in disk, they will be overwritten without further notice. 1031 1032- ``TRUSTED_WORLD_KEY``: This option is used when ``GENERATE_COT=1``. It 1033 specifies a file that contains the Trusted World private key in PEM 1034 format or a PKCS11 URI. If ``SAVE_KEYS=1``, only a file is accepted and 1035 it will be used to save the key. 1036 1037- ``TSP_INIT_ASYNC``: Choose BL32 initialization method as asynchronous or 1038 synchronous, (see "Initializing a BL32 Image" section in 1039 :ref:`Firmware Design`). It can take the value 0 (BL32 is initialized using 1040 synchronous method) or 1 (BL32 is initialized using asynchronous method). 1041 Default is 0. 1042 1043- ``TSP_NS_INTR_ASYNC_PREEMPT``: A non zero value enables the interrupt 1044 routing model which routes non-secure interrupts asynchronously from TSP 1045 to EL3 causing immediate preemption of TSP. The EL3 is responsible 1046 for saving and restoring the TSP context in this routing model. The 1047 default routing model (when the value is 0) is to route non-secure 1048 interrupts to TSP allowing it to save its context and hand over 1049 synchronously to EL3 via an SMC. 1050 1051 .. note:: 1052 When ``EL3_EXCEPTION_HANDLING`` is ``1``, ``TSP_NS_INTR_ASYNC_PREEMPT`` 1053 must also be set to ``1``. 1054 1055- ``TS_SP_FW_CONFIG``: DTC build flag to include Trusted Services (Crypto and 1056 internal-trusted-storage) as SP in tb_fw_config device tree. 1057 1058- ``TWED_DELAY``: Numeric value to be set in order to delay the trapping of 1059 WFE instruction. ``ENABLE_FEAT_TWED`` build option must be enabled to set 1060 this delay. It can take values in the range (0-15). Default value is ``0`` 1061 and based on this value, 2^(TWED_DELAY + 8) cycles will be delayed. 1062 Platforms need to explicitly update this value based on their requirements. 1063 1064- ``USE_ARM_LINK``: This flag determines whether to enable support for ARM 1065 linker. When the ``LINKER`` build variable points to the armlink linker, 1066 this flag is enabled automatically. To enable support for armlink, platforms 1067 will have to provide a scatter file for the BL image. Currently, Tegra 1068 platforms use the armlink support to compile BL3-1 images. 1069 1070- ``USE_COHERENT_MEM``: This flag determines whether to include the coherent 1071 memory region in the BL memory map or not (see "Use of Coherent memory in 1072 TF-A" section in :ref:`Firmware Design`). It can take the value 1 1073 (Coherent memory region is included) or 0 (Coherent memory region is 1074 excluded). Default is 1. 1075 1076- ``ARM_IO_IN_DTB``: This flag determines whether to use IO based on the 1077 firmware configuration framework. This will move the io_policies into a 1078 configuration device tree, instead of static structure in the code base. 1079 1080- ``COT_DESC_IN_DTB``: This flag determines whether to create COT descriptors 1081 at runtime using fconf. If this flag is enabled, COT descriptors are 1082 statically captured in tb_fw_config file in the form of device tree nodes 1083 and properties. Currently, COT descriptors used by BL2 are moved to the 1084 device tree and COT descriptors used by BL1 are retained in the code 1085 base statically. 1086 1087- ``SDEI_IN_FCONF``: This flag determines whether to configure SDEI setup in 1088 runtime using firmware configuration framework. The platform specific SDEI 1089 shared and private events configuration is retrieved from device tree rather 1090 than static C structures at compile time. This is only supported if 1091 SDEI_SUPPORT build flag is enabled. 1092 1093- ``SEC_INT_DESC_IN_FCONF``: This flag determines whether to configure Group 0 1094 and Group1 secure interrupts using the firmware configuration framework. The 1095 platform specific secure interrupt property descriptor is retrieved from 1096 device tree in runtime rather than depending on static C structure at compile 1097 time. 1098 1099- ``USE_ROMLIB``: This flag determines whether library at ROM will be used. 1100 This feature creates a library of functions to be placed in ROM and thus 1101 reduces SRAM usage. Refer to :ref:`Library at ROM` for further details. Default 1102 is 0. 1103 1104- ``V``: Verbose build. If assigned anything other than 0, the build commands 1105 are printed. Default is 0. 1106 1107- ``VERSION_STRING``: String used in the log output for each TF-A image. 1108 Defaults to a string formed by concatenating the version number, build type 1109 and build string. 1110 1111- ``W``: Warning level. Some compiler warning options of interest have been 1112 regrouped and put in the root Makefile. This flag can take the values 0 to 3, 1113 each level enabling more warning options. Default is 0. 1114 1115 This option is closely related to the ``E`` option, which enables 1116 ``-Werror``. 1117 1118 - ``W=0`` (default) 1119 1120 Enables a wide assortment of warnings, most notably ``-Wall`` and 1121 ``-Wextra``, as well as various bad practices and things that are likely to 1122 result in errors. Includes some compiler specific flags. No warnings are 1123 expected at this level for any build. 1124 1125 - ``W=1`` 1126 1127 Enables warnings we want the generic build to include but are too time 1128 consuming to fix at the moment. It re-enables warnings taken out for 1129 ``W=0`` builds (a few of the ``-Wextra`` additions). This level is expected 1130 to eventually be merged into ``W=0``. Some warnings are expected on some 1131 builds, but new contributions should not introduce new ones. 1132 1133 - ``W=2`` (recommended) 1134 1135 Enables warnings we want the generic build to include but cannot be enabled 1136 due to external libraries. This level is expected to eventually be merged 1137 into ``W=0``. Lots of warnings are expected, primarily from external 1138 libraries like zlib and compiler-rt, but new controbutions should not 1139 introduce new ones. 1140 1141 - ``W=3`` 1142 1143 Enables warnings that are informative but not necessary and generally too 1144 verbose and frequently ignored. A very large number of warnings are 1145 expected. 1146 1147 The exact set of warning flags depends on the compiler and TF-A warning 1148 level, however they are all succinctly set in the top-level Makefile. Please 1149 refer to the `GCC`_ or `Clang`_ documentation for more information on the 1150 individual flags. 1151 1152- ``WARMBOOT_ENABLE_DCACHE_EARLY`` : Boolean option to enable D-cache early on 1153 the CPU after warm boot. This is applicable for platforms which do not 1154 require interconnect programming to enable cache coherency (eg: single 1155 cluster platforms). If this option is enabled, then warm boot path 1156 enables D-caches immediately after enabling MMU. This option defaults to 0. 1157 1158- ``SUPPORT_STACK_MEMTAG``: This flag determines whether to enable memory 1159 tagging for stack or not. It accepts 2 values: ``yes`` and ``no``. The 1160 default value of this flag is ``no``. Note this option must be enabled only 1161 for ARM architecture greater than Armv8.5-A. 1162 1163- ``ERRATA_SPECULATIVE_AT``: This flag determines whether to enable ``AT`` 1164 speculative errata workaround or not. It accepts 2 values: ``1`` and ``0``. 1165 The default value of this flag is ``0``. 1166 1167 ``AT`` speculative errata workaround disables stage1 page table walk for 1168 lower ELs (EL1 and EL0) in EL3 so that ``AT`` speculative fetch at any point 1169 produces either the correct result or failure without TLB allocation. 1170 1171 This boolean option enables errata for all below CPUs. 1172 1173 +---------+--------------+-------------------------+ 1174 | Errata | CPU | Workaround Define | 1175 +=========+==============+=========================+ 1176 | 1165522 | Cortex-A76 | ``ERRATA_A76_1165522`` | 1177 +---------+--------------+-------------------------+ 1178 | 1319367 | Cortex-A72 | ``ERRATA_A72_1319367`` | 1179 +---------+--------------+-------------------------+ 1180 | 1319537 | Cortex-A57 | ``ERRATA_A57_1319537`` | 1181 +---------+--------------+-------------------------+ 1182 | 1530923 | Cortex-A55 | ``ERRATA_A55_1530923`` | 1183 +---------+--------------+-------------------------+ 1184 | 1530924 | Cortex-A53 | ``ERRATA_A53_1530924`` | 1185 +---------+--------------+-------------------------+ 1186 1187 .. note:: 1188 This option is enabled by build only if platform sets any of above defines 1189 mentioned in ’Workaround Define' column in the table. 1190 If this option is enabled for the EL3 software then EL2 software also must 1191 implement this workaround due to the behaviour of the errata mentioned 1192 in new SDEN document which will get published soon. 1193 1194- ``RAS_TRAP_NS_ERR_REC_ACCESS``: This flag enables/disables the SCR_EL3.TERR 1195 bit, to trap access to the RAS ERR and RAS ERX registers from lower ELs. 1196 This flag is disabled by default. 1197 1198- ``OPENSSL_DIR``: This option is used to provide the path to a directory on the 1199 host machine where a custom installation of OpenSSL is located, which is used 1200 to build the certificate generation, firmware encryption and FIP tools. If 1201 this option is not set, the default OS installation will be used. 1202 1203- ``USE_SP804_TIMER``: Use the SP804 timer instead of the Generic Timer for 1204 functions that wait for an arbitrary time length (udelay and mdelay). The 1205 default value is 0. 1206 1207- ``ENABLE_BRBE_FOR_NS``: Numeric value to enable access to the branch record 1208 buffer registers from NS ELs when FEAT_BRBE is implemented. BRBE is an 1209 optional architectural feature for AArch64. This flag can take the values 1210 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. The default is 0 1211 and it is automatically disabled when the target architecture is AArch32. 1212 1213- ``ENABLE_TRBE_FOR_NS``: Numeric value to enable access of trace buffer 1214 control registers from NS ELs, NS-EL2 or NS-EL1(when NS-EL2 is implemented 1215 but unused) when FEAT_TRBE is implemented. TRBE is an optional architectural 1216 feature for AArch64. This flag can take the values 0 to 2, to align with the 1217 ``ENABLE_FEAT`` mechanism. The default is 0 and it is automatically 1218 disabled when the target architecture is AArch32. 1219 1220- ``ENABLE_SYS_REG_TRACE_FOR_NS``: Numeric value to enable trace system 1221 registers access from NS ELs, NS-EL2 or NS-EL1 (when NS-EL2 is implemented 1222 but unused). This feature is available if trace unit such as ETMv4.x, and 1223 ETE(extending ETM feature) is implemented. This flag can take the values 1224 0 to 2, to align with the ``ENABLE_FEAT`` mechanism. The default is 0. 1225 1226- ``ENABLE_TRF_FOR_NS``: Numeric value to enable trace filter control registers 1227 access from NS ELs, NS-EL2 or NS-EL1 (when NS-EL2 is implemented but unused), 1228 if FEAT_TRF is implemented. This flag can take the values 0 to 2, to align 1229 with the ``ENABLE_FEAT`` mechanism. This flag is disabled by default. 1230 1231- ``CONDITIONAL_CMO``: Boolean option to enable call to platform-defined routine 1232 ``plat_can_cmo`` which will return zero if cache management operations should 1233 be skipped and non-zero otherwise. By default, this option is disabled which 1234 means platform hook won't be checked and CMOs will always be performed when 1235 related functions are called. 1236 1237- ``ERRATA_ABI_SUPPORT``: Boolean option to enable support for Errata management 1238 firmware interface for the BL31 image. By default its disabled (``0``). 1239 1240- ``ERRATA_NON_ARM_INTERCONNECT``: Boolean option to enable support for the 1241 errata mitigation for platforms with a non-arm interconnect using the errata 1242 ABI. By default its disabled (``0``). 1243 1244- ``ENABLE_CONSOLE_GETC``: Boolean option to enable `getc()` feature in console 1245 driver(s). By default it is disabled (``0``) because it constitutes an attack 1246 vector into TF-A by potentially allowing an attacker to inject arbitrary data. 1247 This option should only be enabled on a need basis if there is a use case for 1248 reading characters from the console. 1249 1250GICv3 driver options 1251-------------------- 1252 1253GICv3 driver files are included using directive: 1254 1255``include drivers/arm/gic/v3/gicv3.mk`` 1256 1257The driver can be configured with the following options set in the platform 1258makefile: 1259 1260- ``GICV3_SUPPORT_GIC600``: Add support for the GIC-600 variants of GICv3. 1261 Enabling this option will add runtime detection support for the 1262 GIC-600, so is safe to select even for a GIC500 implementation. 1263 This option defaults to 0. 1264 1265- ``GICV3_SUPPORT_GIC600AE_FMU``: Add support for the Fault Management Unit 1266 for GIC-600 AE. Enabling this option will introduce support to initialize 1267 the FMU. Platforms should call the init function during boot to enable the 1268 FMU and its safety mechanisms. This option defaults to 0. 1269 1270- ``GICV3_IMPL_GIC600_MULTICHIP``: Selects GIC-600 variant with multichip 1271 functionality. This option defaults to 0 1272 1273- ``GICV3_OVERRIDE_DISTIF_PWR_OPS``: Allows override of default implementation 1274 of ``arm_gicv3_distif_pre_save`` and ``arm_gicv3_distif_post_restore`` 1275 functions. This is required for FVP platform which need to simulate GIC save 1276 and restore during SYSTEM_SUSPEND without powering down GIC. Default is 0. 1277 1278- ``GIC_ENABLE_V4_EXTN`` : Enables GICv4 related changes in GICv3 driver. 1279 This option defaults to 0. 1280 1281- ``GIC_EXT_INTID``: When set to ``1``, GICv3 driver will support extended 1282 PPI (1056-1119) and SPI (4096-5119) range. This option defaults to 0. 1283 1284Debugging options 1285----------------- 1286 1287To compile a debug version and make the build more verbose use 1288 1289.. code:: shell 1290 1291 make PLAT=<platform> DEBUG=1 V=1 all 1292 1293AArch64 GCC 11 uses DWARF version 5 debugging symbols by default. Some tools 1294(for example Arm-DS) might not support this and may need an older version of 1295DWARF symbols to be emitted by GCC. This can be achieved by using the 1296``-gdwarf-<version>`` flag, with the version being set to 2, 3, 4 or 5. Setting 1297the version to 4 is recommended for Arm-DS. 1298 1299When debugging logic problems it might also be useful to disable all compiler 1300optimizations by using ``-O0``. 1301 1302.. warning:: 1303 Using ``-O0`` could cause output images to be larger and base addresses 1304 might need to be recalculated (see the **Memory layout on Arm development 1305 platforms** section in the :ref:`Firmware Design`). 1306 1307Extra debug options can be passed to the build system by setting ``CFLAGS`` or 1308``LDFLAGS``: 1309 1310.. code:: shell 1311 1312 CFLAGS='-O0 -gdwarf-2' \ 1313 make PLAT=<platform> DEBUG=1 V=1 all 1314 1315Note that using ``-Wl,`` style compilation driver options in ``CFLAGS`` will be 1316ignored as the linker is called directly. 1317 1318It is also possible to introduce an infinite loop to help in debugging the 1319post-BL2 phase of TF-A. This can be done by rebuilding BL1 with the 1320``SPIN_ON_BL1_EXIT=1`` build flag. Refer to the :ref:`build_options_common` 1321section. In this case, the developer may take control of the target using a 1322debugger when indicated by the console output. When using Arm-DS, the following 1323commands can be used: 1324 1325:: 1326 1327 # Stop target execution 1328 interrupt 1329 1330 # 1331 # Prepare your debugging environment, e.g. set breakpoints 1332 # 1333 1334 # Jump over the debug loop 1335 set var $AARCH64::$Core::$PC = $AARCH64::$Core::$PC + 4 1336 1337 # Resume execution 1338 continue 1339 1340.. _build_options_experimental: 1341 1342Experimental build options 1343--------------------------- 1344 1345Common build options 1346~~~~~~~~~~~~~~~~~~~~ 1347 1348- ``DICE_PROTECTION_ENVIRONMENT``: Boolean flag to specify the measured boot 1349 backend when ``MEASURED_BOOT`` is enabled. The default value is ``0``. When 1350 set to ``1`` then measurements and additional metadata collected during the 1351 measured boot process are sent to the DICE Protection Environment for storage 1352 and processing. A certificate chain, which represents the boot state of the 1353 device, can be queried from the DPE. 1354 1355- ``DRTM_SUPPORT``: Boolean flag to enable support for Dynamic Root of Trust 1356 for Measurement (DRTM). This feature has trust dependency on BL31 for taking 1357 the measurements and recording them as per `PSA DRTM specification`_. For 1358 platforms which use BL2 to load/authenticate BL31 ``TRUSTED_BOARD_BOOT`` can 1359 be used and for the platforms which use ``RESET_TO_BL31`` platform owners 1360 should have mechanism to authenticate BL31. This option defaults to 0. 1361 1362- ``ENABLE_RME``: Numeric value to enable support for the ARMv9 Realm 1363 Management Extension. This flag can take the values 0 to 2, to align with 1364 the ``ENABLE_FEAT`` mechanism. Default value is 0. 1365 1366- ``RMMD_ENABLE_EL3_TOKEN_SIGN``: Numeric value to enable support for singing 1367 realm attestation token signing requests in EL3. This flag can take the 1368 values 0 and 1. The default value is ``0``. When set to ``1``, this option 1369 enables additional RMMD SMCs to push and pop requests for signing to 1370 EL3 along with platform hooks that must be implemented to service those 1371 requests and responses. 1372 1373- ``ENABLE_SME_FOR_NS``: Numeric value to enable Scalable Matrix Extension 1374 (SME), SVE, and FPU/SIMD for the non-secure world only. These features share 1375 registers so are enabled together. Using this option without 1376 ENABLE_SME_FOR_SWD=1 will cause SME, SVE, and FPU/SIMD instructions in secure 1377 world to trap to EL3. Requires ``ENABLE_SVE_FOR_NS`` to be set as SME is a 1378 superset of SVE. SME is an optional architectural feature for AArch64. 1379 At this time, this build option cannot be used on systems that have 1380 SPD=spmd/SPM_MM and atempting to build with this option will fail. 1381 This flag can take the values 0 to 2, to align with the ``ENABLE_FEAT`` 1382 mechanism. Default is 0. 1383 1384- ``ENABLE_SME2_FOR_NS``: Numeric value to enable Scalable Matrix Extension 1385 version 2 (SME2) for the non-secure world only. SME2 is an optional 1386 architectural feature for AArch64. 1387 This should be set along with ENABLE_SME_FOR_NS=1, if not, the default SME 1388 accesses will still be trapped. This flag can take the values 0 to 2, to 1389 align with the ``ENABLE_FEAT`` mechanism. Default is 0. 1390 1391- ``ENABLE_SME_FOR_SWD``: Boolean option to enable the Scalable Matrix 1392 Extension for secure world. Used along with SVE and FPU/SIMD. 1393 ENABLE_SME_FOR_NS and ENABLE_SVE_FOR_SWD must also be set to use this. 1394 Default is 0. 1395 1396- ``ENABLE_SPMD_LP`` : This boolean option is used jointly with the SPM 1397 Dispatcher option (``SPD=spmd``). When enabled (1) it indicates support 1398 for logical partitions in EL3, managed by the SPMD as defined in the 1399 FF-A v1.2 specification. This flag is disabled by default. This flag 1400 must not be used if ``SPMC_AT_EL3`` is enabled. 1401 1402- ``FEATURE_DETECTION``: Boolean option to enable the architectural features 1403 verification mechanism. This is a debug feature that compares the 1404 architectural features enabled through the feature specific build flags 1405 (ENABLE_FEAT_xxx) with the features actually available on the CPU running, 1406 and reports any discrepancies. 1407 This flag will also enable errata ordering checking for ``DEBUG`` builds. 1408 1409 It is expected that this feature is only used for flexible platforms like 1410 software emulators, or for hardware platforms at bringup time, to verify 1411 that the configured feature set matches the CPU. 1412 The ``FEATURE_DETECTION`` macro is disabled by default. 1413 1414- ``PSA_CRYPTO``: Boolean option for enabling MbedTLS PSA crypto APIs support. 1415 The platform will use PSA compliant Crypto APIs during authentication and 1416 image measurement process by enabling this option. It uses APIs defined as 1417 per the `PSA Crypto API specification`_. This feature is only supported if 1418 using MbedTLS 3.x version. It is disabled (``0``) by default. 1419 1420- ``TRANSFER_LIST``: Setting this to ``1`` enables support for Firmware 1421 Handoff using Transfer List defined in `Firmware Handoff specification`_. 1422 This defaults to ``0``. Current implementation follows the Firmware Handoff 1423 specification v0.9. 1424 1425- ``USE_DEBUGFS``: When set to 1 this option exposes a virtual filesystem 1426 interface through BL31 as a SiP SMC function. 1427 Default is disabled (0). 1428 1429- ``HOB_LIST``: Setting this to ``1`` enables support for passing boot 1430 information using HOB defined in `Platform Initialization specification`_. 1431 This defaults to ``0``. 1432 1433Firmware update options 1434~~~~~~~~~~~~~~~~~~~~~~~ 1435 1436- ``PSA_FWU_SUPPORT``: Enable the firmware update mechanism as per the 1437 `PSA FW update specification`_. The default value is 0. 1438 PSA firmware update implementation has few limitations, such as: 1439 1440 - BL2 is not part of the protocol-updatable images. If BL2 needs to 1441 be updated, then it should be done through another platform-defined 1442 mechanism. 1443 1444 - It assumes the platform's hardware supports CRC32 instructions. 1445 1446- ``NR_OF_FW_BANKS``: Define the number of firmware banks. This flag is used 1447 in defining the firmware update metadata structure. This flag is by default 1448 set to '2'. 1449 1450- ``NR_OF_IMAGES_IN_FW_BANK``: Define the number of firmware images in each 1451 firmware bank. Each firmware bank must have the same number of images as per 1452 the `PSA FW update specification`_. 1453 This flag is used in defining the firmware update metadata structure. This 1454 flag is by default set to '1'. 1455 1456- ``PSA_FWU_METADATA_FW_STORE_DESC``: To be enabled when the FWU 1457 metadata contains image description. The default value is 1. 1458 1459 The version 2 of the FWU metadata allows for an opaque metadata 1460 structure where a platform can choose to not include the firmware 1461 store description in the metadata structure. This option indicates 1462 if the firmware store description, which provides information on 1463 the updatable images is part of the structure. 1464 1465-------------- 1466 1467*Copyright (c) 2019-2024, Arm Limited. All rights reserved.* 1468 1469.. _DEN0115: https://developer.arm.com/docs/den0115/latest 1470.. _PSA FW update specification: https://developer.arm.com/documentation/den0118/latest/ 1471.. _PSA DRTM specification: https://developer.arm.com/documentation/den0113/a 1472.. _GCC: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html 1473.. _Clang: https://clang.llvm.org/docs/DiagnosticsReference.html 1474.. _Firmware Handoff specification: https://github.com/FirmwareHandoff/firmware_handoff/releases/tag/v0.9 1475.. _PSA Crypto API specification: https://armmbed.github.io/mbed-crypto/html/ 1476.. _Platform Initialization specification: https://uefi.org/specs/PI/1.8/index.html 1477