1Build Options 2============= 3 4The TF-A build system supports the following build options. Unless mentioned 5otherwise, these options are expected to be specified at the build command 6line and are not to be modified in any component makefiles. Note that the 7build system doesn't track dependency for build options. Therefore, if any of 8the build options are changed from a previous build, a clean build must be 9performed. 10 11.. _build_options_common: 12 13Common build options 14-------------------- 15 16- ``AARCH32_INSTRUCTION_SET``: Choose the AArch32 instruction set that the 17 compiler should use. Valid values are T32 and A32. It defaults to T32 due to 18 code having a smaller resulting size. 19 20- ``AARCH32_SP`` : Choose the AArch32 Secure Payload component to be built as 21 as the BL32 image when ``ARCH=aarch32``. The value should be the path to the 22 directory containing the SP source, relative to the ``bl32/``; the directory 23 is expected to contain a makefile called ``<aarch32_sp-value>.mk``. 24 25- ``AMU_RESTRICT_COUNTERS``: Register reads to the group 1 counters will return 26 zero at all but the highest implemented exception level. Reads from the 27 memory mapped view are unaffected by this control. 28 29- ``ARCH`` : Choose the target build architecture for TF-A. It can take either 30 ``aarch64`` or ``aarch32`` as values. By default, it is defined to 31 ``aarch64``. 32 33- ``ARM_ARCH_FEATURE``: Optional Arm Architecture build option which specifies 34 one or more feature modifiers. This option has the form ``[no]feature+...`` 35 and defaults to ``none``. It translates into compiler option 36 ``-march=armvX[.Y]-a+[no]feature+...``. See compiler's documentation for the 37 list of supported feature modifiers. 38 39- ``ARM_ARCH_MAJOR``: The major version of Arm Architecture to target when 40 compiling TF-A. Its value must be numeric, and defaults to 8 . See also, 41 *Armv8 Architecture Extensions* and *Armv7 Architecture Extensions* in 42 :ref:`Firmware Design`. 43 44- ``ARM_ARCH_MINOR``: The minor version of Arm Architecture to target when 45 compiling TF-A. Its value must be a numeric, and defaults to 0. See also, 46 *Armv8 Architecture Extensions* in :ref:`Firmware Design`. 47 48- ``BL2``: This is an optional build option which specifies the path to BL2 49 image for the ``fip`` target. In this case, the BL2 in the TF-A will not be 50 built. 51 52- ``BL2U``: This is an optional build option which specifies the path to 53 BL2U image. In this case, the BL2U in TF-A will not be built. 54 55- ``RESET_TO_BL2``: Boolean option to enable BL2 entrypoint as the CPU reset 56 vector instead of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 57 entrypoint) or 1 (CPU reset to BL2 entrypoint). 58 The default value is 0. 59 60- ``BL2_RUNS_AT_EL3``: This is an implicit flag to denote that BL2 runs at EL3. 61 While it is explicitly set to 1 when RESET_TO_BL2 is set to 1 it can also be 62 true in a 4-world system where RESET_TO_BL2 is 0. 63 64- ``BL2_ENABLE_SP_LOAD``: Boolean option to enable loading SP packages from the 65 FIP. Automatically enabled if ``SP_LAYOUT_FILE`` is provided. 66 67- ``BL2_IN_XIP_MEM``: In some use-cases BL2 will be stored in eXecute In Place 68 (XIP) memory, like BL1. In these use-cases, it is necessary to initialize 69 the RW sections in RAM, while leaving the RO sections in place. This option 70 enable this use-case. For now, this option is only supported 71 when RESET_TO_BL2 is set to '1'. 72 73- ``BL31``: This is an optional build option which specifies the path to 74 BL31 image for the ``fip`` target. In this case, the BL31 in TF-A will not 75 be built. 76 77- ``BL31_KEY``: This option is used when ``GENERATE_COT=1``. It specifies the 78 file that contains the BL31 private key in PEM format. If ``SAVE_KEYS=1``, 79 this file name will be used to save the key. 80 81- ``BL32``: This is an optional build option which specifies the path to 82 BL32 image for the ``fip`` target. In this case, the BL32 in TF-A will not 83 be built. 84 85- ``BL32_EXTRA1``: This is an optional build option which specifies the path to 86 Trusted OS Extra1 image for the ``fip`` target. 87 88- ``BL32_EXTRA2``: This is an optional build option which specifies the path to 89 Trusted OS Extra2 image for the ``fip`` target. 90 91- ``BL32_KEY``: This option is used when ``GENERATE_COT=1``. It specifies the 92 file that contains the BL32 private key in PEM format. If ``SAVE_KEYS=1``, 93 this file name will be used to save the key. 94 95- ``BL33``: Path to BL33 image in the host file system. This is mandatory for 96 ``fip`` target in case TF-A BL2 is used. 97 98- ``BL33_KEY``: This option is used when ``GENERATE_COT=1``. It specifies the 99 file that contains the BL33 private key in PEM format. If ``SAVE_KEYS=1``, 100 this file name will be used to save the key. 101 102- ``BRANCH_PROTECTION``: Numeric value to enable ARMv8.3 Pointer Authentication 103 and ARMv8.5 Branch Target Identification support for TF-A BL images themselves. 104 If enabled, it is needed to use a compiler that supports the option 105 ``-mbranch-protection``. Selects the branch protection features to use: 106- 0: Default value turns off all types of branch protection 107- 1: Enables all types of branch protection features 108- 2: Return address signing to its standard level 109- 3: Extend the signing to include leaf functions 110- 4: Turn on branch target identification mechanism 111 112 The table below summarizes ``BRANCH_PROTECTION`` values, GCC compilation options 113 and resulting PAuth/BTI features. 114 115 +-------+--------------+-------+-----+ 116 | Value | GCC option | PAuth | BTI | 117 +=======+==============+=======+=====+ 118 | 0 | none | N | N | 119 +-------+--------------+-------+-----+ 120 | 1 | standard | Y | Y | 121 +-------+--------------+-------+-----+ 122 | 2 | pac-ret | Y | N | 123 +-------+--------------+-------+-----+ 124 | 3 | pac-ret+leaf | Y | N | 125 +-------+--------------+-------+-----+ 126 | 4 | bti | N | Y | 127 +-------+--------------+-------+-----+ 128 129 This option defaults to 0. 130 Note that Pointer Authentication is enabled for Non-secure world 131 irrespective of the value of this option if the CPU supports it. 132 133- ``BUILD_MESSAGE_TIMESTAMP``: String used to identify the time and date of the 134 compilation of each build. It must be set to a C string (including quotes 135 where applicable). Defaults to a string that contains the time and date of 136 the compilation. 137 138- ``BUILD_STRING``: Input string for VERSION_STRING, which allows the TF-A 139 build to be uniquely identified. Defaults to the current git commit id. 140 141- ``BUILD_BASE``: Output directory for the build. Defaults to ``./build`` 142 143- ``CFLAGS``: Extra user options appended on the compiler's command line in 144 addition to the options set by the build system. 145 146- ``COLD_BOOT_SINGLE_CPU``: This option indicates whether the platform may 147 release several CPUs out of reset. It can take either 0 (several CPUs may be 148 brought up) or 1 (only one CPU will ever be brought up during cold reset). 149 Default is 0. If the platform always brings up a single CPU, there is no 150 need to distinguish between primary and secondary CPUs and the boot path can 151 be optimised. The ``plat_is_my_cpu_primary()`` and 152 ``plat_secondary_cold_boot_setup()`` platform porting interfaces do not need 153 to be implemented in this case. 154 155- ``COT``: When Trusted Boot is enabled, selects the desired chain of trust. 156 Defaults to ``tbbr``. 157 158- ``CRASH_REPORTING``: A non-zero value enables a console dump of processor 159 register state when an unexpected exception occurs during execution of 160 BL31. This option defaults to the value of ``DEBUG`` - i.e. by default 161 this is only enabled for a debug build of the firmware. 162 163- ``CREATE_KEYS``: This option is used when ``GENERATE_COT=1``. It tells the 164 certificate generation tool to create new keys in case no valid keys are 165 present or specified. Allowed options are '0' or '1'. Default is '1'. 166 167- ``CTX_INCLUDE_AARCH32_REGS`` : Boolean option that, when set to 1, will cause 168 the AArch32 system registers to be included when saving and restoring the 169 CPU context. The option must be set to 0 for AArch64-only platforms (that 170 is on hardware that does not implement AArch32, or at least not at EL1 and 171 higher ELs). Default value is 1. 172 173- ``CTX_INCLUDE_FPREGS``: Boolean option that, when set to 1, will cause the FP 174 registers to be included when saving and restoring the CPU context. Default 175 is 0. 176 177- ``CTX_INCLUDE_MTE_REGS``: Numeric value to include Memory Tagging Extension 178 registers in cpu context. This must be enabled, if the platform wants to use 179 this feature in the Secure world and MTE is enabled at ELX. This flag can 180 take values 0 to 2, to align with the ``FEATURE_DETECTION`` mechanism. 181 Default value is 0. 182 183- ``CTX_INCLUDE_NEVE_REGS``: Numeric value, when set will cause the Armv8.4-NV 184 registers to be saved/restored when entering/exiting an EL2 execution 185 context. This flag can take values 0 to 2, to align with the 186 ``FEATURE_DETECTION`` mechanism. Default value is 0. 187 188- ``CTX_INCLUDE_PAUTH_REGS``: Numeric value to enable the Pointer 189 Authentication for Secure world. This will cause the ARMv8.3-PAuth registers 190 to be included when saving and restoring the CPU context as part of world 191 switch. This flag can take values 0 to 2, to align with ``FEATURE_DETECTION`` 192 mechanism. Default value is 0. 193 194 Note that Pointer Authentication is enabled for Non-secure world irrespective 195 of the value of this flag if the CPU supports it. 196 197- ``DEBUG``: Chooses between a debug and release build. It can take either 0 198 (release) or 1 (debug) as values. 0 is the default. 199 200- ``DECRYPTION_SUPPORT``: This build flag enables the user to select the 201 authenticated decryption algorithm to be used to decrypt firmware/s during 202 boot. It accepts 2 values: ``aes_gcm`` and ``none``. The default value of 203 this flag is ``none`` to disable firmware decryption which is an optional 204 feature as per TBBR. 205 206- ``DISABLE_BIN_GENERATION``: Boolean option to disable the generation 207 of the binary image. If set to 1, then only the ELF image is built. 208 0 is the default. 209 210- ``DISABLE_MTPMU``: Boolean option to disable FEAT_MTPMU if implemented 211 (Armv8.6 onwards). Its default value is 0 to keep consistency with platforms 212 that do not implement FEAT_MTPMU. For more information on FEAT_MTPMU, 213 check the latest Arm ARM. 214 215- ``DYN_DISABLE_AUTH``: Provides the capability to dynamically disable Trusted 216 Board Boot authentication at runtime. This option is meant to be enabled only 217 for development platforms. ``TRUSTED_BOARD_BOOT`` flag must be set if this 218 flag has to be enabled. 0 is the default. 219 220- ``E``: Boolean option to make warnings into errors. Default is 1. 221 222 When specifying higher warnings levels (``W=1`` and higher), this option 223 defaults to 0. This is done to encourage contributors to use them, as they 224 are expected to produce warnings that would otherwise fail the build. New 225 contributions are still expected to build with ``W=0`` and ``E=1`` (the 226 default). 227 228- ``EL3_PAYLOAD_BASE``: This option enables booting an EL3 payload instead of 229 the normal boot flow. It must specify the entry point address of the EL3 230 payload. Please refer to the "Booting an EL3 payload" section for more 231 details. 232 233- ``ENABLE_AMU_AUXILIARY_COUNTERS``: Enables support for AMU auxiliary counters 234 (also known as group 1 counters). These are implementation-defined counters, 235 and as such require additional platform configuration. Default is 0. 236 237- ``ENABLE_AMU_FCONF``: Enables configuration of the AMU through FCONF, which 238 allows platforms with auxiliary counters to describe them via the 239 ``HW_CONFIG`` device tree blob. Default is 0. 240 241- ``ENABLE_ASSERTIONS``: This option controls whether or not calls to ``assert()`` 242 are compiled out. For debug builds, this option defaults to 1, and calls to 243 ``assert()`` are left in place. For release builds, this option defaults to 0 244 and calls to ``assert()`` function are compiled out. This option can be set 245 independently of ``DEBUG``. It can also be used to hide any auxiliary code 246 that is only required for the assertion and does not fit in the assertion 247 itself. 248 249- ``ENABLE_BACKTRACE``: This option controls whether to enable backtrace 250 dumps or not. It is supported in both AArch64 and AArch32. However, in 251 AArch32 the format of the frame records are not defined in the AAPCS and they 252 are defined by the implementation. This implementation of backtrace only 253 supports the format used by GCC when T32 interworking is disabled. For this 254 reason enabling this option in AArch32 will force the compiler to only 255 generate A32 code. This option is enabled by default only in AArch64 debug 256 builds, but this behaviour can be overridden in each platform's Makefile or 257 in the build command line. 258 259- ``ENABLE_FEAT_AMU``: Numeric value to enable Activity Monitor Unit 260 extensions. This flag can take the values 0 to 2, to align with the 261 ``FEATURE_DETECTION`` mechanism. This is an optional architectural feature 262 available on v8.4 onwards. Some v8.2 implementations also implement an AMU 263 and this option can be used to enable this feature on those systems as well. 264 This flag can take the values 0 to 2, the default is 0. 265 266- ``ENABLE_FEAT_AMUv1p1``: Numeric value to enable the ``FEAT_AMUv1p1`` 267 extension. ``FEAT_AMUv1p1`` is an optional feature available on Arm v8.6 268 onwards. This flag can take the values 0 to 2, to align with the 269 ``FEATURE_DETECTION`` mechanism. Default value is ``0``. 270 271- ``ENABLE_FEAT_CSV2_2``: Numeric value to enable the ``FEAT_CSV2_2`` 272 extension. It allows access to the SCXTNUM_EL2 (Software Context Number) 273 register during EL2 context save/restore operations. ``FEAT_CSV2_2`` is an 274 optional feature available on Arm v8.0 onwards. This flag can take values 275 0 to 2, to align with the ``FEATURE_DETECTION`` mechanism. 276 Default value is ``0``. 277 278- ``ENABLE_FEAT_DIT``: Numeric value to enable ``FEAT_DIT`` (Data Independent 279 Timing) extension. It allows setting the ``DIT`` bit of PSTATE in EL3. 280 ``FEAT_DIT`` is a mandatory architectural feature and is enabled from v8.4 281 and upwards. This flag can take the values 0 to 2, to align with the 282 ``FEATURE_DETECTION`` mechanism. Default value is ``0``. 283 284- ``ENABLE_FEAT_ECV``: Numeric value to enable support for the Enhanced Counter 285 Virtualization feature, allowing for access to the CNTPOFF_EL2 (Counter-timer 286 Physical Offset register) during EL2 to EL3 context save/restore operations. 287 Its a mandatory architectural feature and is enabled from v8.6 and upwards. 288 This flag can take the values 0 to 2, to align with the ``FEATURE_DETECTION`` 289 mechanism. Default value is ``0``. 290 291- ``ENABLE_FEAT_FGT``: Numeric value to enable support for FGT (Fine Grain Traps) 292 feature allowing for access to the HDFGRTR_EL2 (Hypervisor Debug Fine-Grained 293 Read Trap Register) during EL2 to EL3 context save/restore operations. 294 Its a mandatory architectural feature and is enabled from v8.6 and upwards. 295 This flag can take the values 0 to 2, to align with the ``FEATURE_DETECTION`` 296 mechanism. Default value is ``0``. 297 298- ``ENABLE_FEAT_HCX``: Numeric value to set the bit SCR_EL3.HXEn in EL3 to 299 allow access to HCRX_EL2 (extended hypervisor control register) from EL2 as 300 well as adding HCRX_EL2 to the EL2 context save/restore operations. Its a 301 mandatory architectural feature and is enabled from v8.7 and upwards. This 302 flag can take the values 0 to 2, to align with the ``FEATURE_DETECTION`` 303 mechanism. Default value is ``0``. 304 305- ``ENABLE_FEAT_PAN``: Numeric value to enable the ``FEAT_PAN`` (Privileged 306 Access Never) extension. ``FEAT_PAN`` adds a bit to PSTATE, generating a 307 permission fault for any privileged data access from EL1/EL2 to virtual 308 memory address, accessible at EL0, provided (HCR_EL2.E2H=1). It is a 309 mandatory architectural feature and is enabled from v8.1 and upwards. This 310 flag can take values 0 to 2, to align with the ``FEATURE_DETECTION`` 311 mechanism. Default value is ``0``. 312 313- ``ENABLE_FEAT_RNG``: Numeric value to enable the ``FEAT_RNG`` extension. 314 ``FEAT_RNG`` is an optional feature available on Arm v8.5 onwards. This 315 flag can take the values 0 to 2, to align with the ``FEATURE_DETECTION`` 316 mechanism. Default value is ``0``. 317 318- ``ENABLE_FEAT_RNG_TRAP``: Numeric value to enable the ``FEAT_RNG_TRAP`` 319 extension. This feature is only supported in AArch64 state. This flag can 320 take values 0 to 2, to align with the ``FEATURE_DETECTION`` mechanism. 321 Default value is ``0``. ``FEAT_RNG_TRAP`` is an optional feature from 322 Armv8.5 onwards. 323 324- ``ENABLE_FEAT_SB``: Boolean option to let the TF-A code use the ``FEAT_SB`` 325 (Speculation Barrier) instruction ``FEAT_SB`` is an optional feature and 326 defaults to ``0`` for pre-Armv8.5 CPUs, but is mandatory for Armv8.5 or 327 later CPUs. It is enabled from v8.5 and upwards and if needed can be 328 overidden from platforms explicitly. 329 330- ``ENABLE_FEAT_SEL2``: Numeric value to enable the ``FEAT_SEL2`` (Secure EL2) 331 extension. ``FEAT_SEL2`` is a mandatory feature available on Arm v8.4. 332 This flag can take values 0 to 2, to align with the ``FEATURE_DETECTION`` 333 mechanism. Default is ``0``. 334 335- ``ENABLE_FEAT_TWED``: Numeric value to enable the ``FEAT_TWED`` (Delayed 336 trapping of WFE Instruction) extension. ``FEAT_TWED`` is a optional feature 337 available on Arm v8.6. This flag can take values 0 to 2, to align with the 338 ``FEATURE_DETECTION`` mechanism. Default is ``0``. 339 340 When ``ENABLE_FEAT_TWED`` is set to ``1``, WFE instruction trapping gets 341 delayed by the amount of value in ``TWED_DELAY``. 342 343- ``ENABLE_FEAT_VHE``: Numeric value to enable the ``FEAT_VHE`` (Virtualization 344 Host Extensions) extension. It allows access to CONTEXTIDR_EL2 register 345 during EL2 context save/restore operations.``FEAT_VHE`` is a mandatory 346 architectural feature and is enabled from v8.1 and upwards. It can take 347 values 0 to 2, to align with the ``FEATURE_DETECTION`` mechanism. 348 Default value is ``0``. 349 350- ``ENABLE_FEAT_TCR2``: Numeric value to set the bit SCR_EL3.ENTCR2 in EL3 to 351 allow access to TCR2_EL2 (extended translation control) from EL2 as 352 well as adding TCR2_EL2 to the EL2 context save/restore operations. Its a 353 mandatory architectural feature and is enabled from v8.9 and upwards. This 354 flag can take the values 0 to 2, to align with the ``FEATURE_DETECTION`` 355 mechanism. Default value is ``0``. 356 357- ``ENABLE_LTO``: Boolean option to enable Link Time Optimization (LTO) 358 support in GCC for TF-A. This option is currently only supported for 359 AArch64. Default is 0. 360 361- ``ENABLE_MPAM_FOR_LOWER_ELS``: Numeric value to enable lower ELs to use MPAM 362 feature. MPAM is an optional Armv8.4 extension that enables various memory 363 system components and resources to define partitions; software running at 364 various ELs can assign themselves to desired partition to control their 365 performance aspects. 366 367 This flag can take values 0 to 2, to align with the ``FEATURE_DETECTION`` 368 mechanism. When this option is set to ``1`` or ``2``, EL3 allows lower ELs to 369 access their own MPAM registers without trapping into EL3. This option 370 doesn't make use of partitioning in EL3, however. Platform initialisation 371 code should configure and use partitions in EL3 as required. This option 372 defaults to ``0``. 373 374- ``ENABLE_MPMM``: Boolean option to enable support for the Maximum Power 375 Mitigation Mechanism supported by certain Arm cores, which allows the SoC 376 firmware to detect and limit high activity events to assist in SoC processor 377 power domain dynamic power budgeting and limit the triggering of whole-rail 378 (i.e. clock chopping) responses to overcurrent conditions. Defaults to ``0``. 379 380- ``ENABLE_MPMM_FCONF``: Enables configuration of MPMM through FCONF, which 381 allows platforms with cores supporting MPMM to describe them via the 382 ``HW_CONFIG`` device tree blob. Default is 0. 383 384- ``ENABLE_PIE``: Boolean option to enable Position Independent Executable(PIE) 385 support within generic code in TF-A. This option is currently only supported 386 in BL2, BL31, and BL32 (TSP) for AARCH64 binaries, and 387 in BL32 (SP_min) for AARCH32. Default is 0. 388 389- ``ENABLE_PMF``: Boolean option to enable support for optional Performance 390 Measurement Framework(PMF). Default is 0. 391 392- ``ENABLE_PSCI_STAT``: Boolean option to enable support for optional PSCI 393 functions ``PSCI_STAT_RESIDENCY`` and ``PSCI_STAT_COUNT``. Default is 0. 394 In the absence of an alternate stat collection backend, ``ENABLE_PMF`` must 395 be enabled. If ``ENABLE_PMF`` is set, the residency statistics are tracked in 396 software. 397 398- ``ENABLE_RME``: Numeric value to enable support for the ARMv9 Realm 399 Management Extension. This flag can take the values 0 to 2, to align with 400 the ``FEATURE_DETECTION`` mechanism. Default value is 0. This is currently 401 an experimental feature. 402 403- ``ENABLE_RUNTIME_INSTRUMENTATION``: Boolean option to enable runtime 404 instrumentation which injects timestamp collection points into TF-A to 405 allow runtime performance to be measured. Currently, only PSCI is 406 instrumented. Enabling this option enables the ``ENABLE_PMF`` build option 407 as well. Default is 0. 408 409- ``ENABLE_SME_FOR_NS``: Numeric value to enable Scalable Matrix Extension 410 (SME), SVE, and FPU/SIMD for the non-secure world only. These features share 411 registers so are enabled together. Using this option without 412 ENABLE_SME_FOR_SWD=1 will cause SME, SVE, and FPU/SIMD instructions in secure 413 world to trap to EL3. SME is an optional architectural feature for AArch64 414 and TF-A support is experimental. At this time, this build option cannot be 415 used on systems that have SPD=spmd/SPM_MM or ENABLE_RME, and attempting to 416 build with these options will fail. This flag can take the values 0 to 2, to 417 align with the ``FEATURE_DETECTION`` mechanism. Default is 0. 418 419- ``ENABLE_SME_FOR_SWD``: Boolean option to enable the Scalable Matrix 420 Extension for secure world use along with SVE and FPU/SIMD, ENABLE_SME_FOR_NS 421 must also be set to use this. If enabling this, the secure world MUST 422 handle context switching for SME, SVE, and FPU/SIMD registers to ensure that 423 no data is leaked to non-secure world. This is experimental. Default is 0. 424 425- ``ENABLE_SPE_FOR_NS`` : Numeric value to enable Statistical Profiling 426 extensions. This is an optional architectural feature for AArch64. 427 This flag can take the values 0 to 2, to align with the ``FEATURE_DETECTION`` 428 mechanism. The default is 2 but is automatically disabled when the target 429 architecture is AArch32. 430 431- ``ENABLE_SVE_FOR_NS``: Numeric value to enable Scalable Vector Extension 432 (SVE) for the Non-secure world only. SVE is an optional architectural feature 433 for AArch64. Note that when SVE is enabled for the Non-secure world, access 434 to SIMD and floating-point functionality from the Secure world is disabled by 435 default and controlled with ENABLE_SVE_FOR_SWD. 436 This is to avoid corruption of the Non-secure world data in the Z-registers 437 which are aliased by the SIMD and FP registers. The build option is not 438 compatible with the ``CTX_INCLUDE_FPREGS`` build option, and will raise an 439 assert on platforms where SVE is implemented and ``ENABLE_SVE_FOR_NS`` set to 440 1. This flag can take the values 0 to 2, to align with the ``FEATURE_DETECTION`` 441 mechanism. The default is 1 but is automatically disabled when 442 ENABLE_SME_FOR_NS=1 since SME encompasses SVE. At this time, this build 443 option cannot be used on systems that have SPM_MM enabled. 444 445- ``ENABLE_SVE_FOR_SWD``: Boolean option to enable SVE for the Secure world. 446 SVE is an optional architectural feature for AArch64. Note that this option 447 requires ENABLE_SVE_FOR_NS to be enabled. The default is 0 and it 448 is automatically disabled when the target architecture is AArch32. 449 450- ``ENABLE_STACK_PROTECTOR``: String option to enable the stack protection 451 checks in GCC. Allowed values are "all", "strong", "default" and "none". The 452 default value is set to "none". "strong" is the recommended stack protection 453 level if this feature is desired. "none" disables the stack protection. For 454 all values other than "none", the ``plat_get_stack_protector_canary()`` 455 platform hook needs to be implemented. The value is passed as the last 456 component of the option ``-fstack-protector-$ENABLE_STACK_PROTECTOR``. 457 458- ``ENCRYPT_BL31``: Binary flag to enable encryption of BL31 firmware. This 459 flag depends on ``DECRYPTION_SUPPORT`` build flag. 460 461- ``ENCRYPT_BL32``: Binary flag to enable encryption of Secure BL32 payload. 462 This flag depends on ``DECRYPTION_SUPPORT`` build flag. 463 464- ``ENC_KEY``: A 32-byte (256-bit) symmetric key in hex string format. It could 465 either be SSK or BSSK depending on ``FW_ENC_STATUS`` flag. This value depends 466 on ``DECRYPTION_SUPPORT`` build flag. 467 468- ``ENC_NONCE``: A 12-byte (96-bit) encryption nonce or Initialization Vector 469 (IV) in hex string format. This value depends on ``DECRYPTION_SUPPORT`` 470 build flag. 471 472- ``ERROR_DEPRECATED``: This option decides whether to treat the usage of 473 deprecated platform APIs, helper functions or drivers within Trusted 474 Firmware as error. It can take the value 1 (flag the use of deprecated 475 APIs as error) or 0. The default is 0. 476 477- ``EL3_EXCEPTION_HANDLING``: When set to ``1``, enable handling of exceptions 478 targeted at EL3. When set ``0`` (default), no exceptions are expected or 479 handled at EL3, and a panic will result. The exception to this rule is when 480 ``SPMD_SPM_AT_SEL2`` is set to ``1``, in which case, only exceptions 481 occuring during normal world execution, are trapped to EL3. Any exception 482 trapped during secure world execution are trapped to the SPMC. This is 483 supported only for AArch64 builds. 484 485- ``EVENT_LOG_LEVEL``: Chooses the log level to use for Measured Boot when 486 ``MEASURED_BOOT`` is enabled. For a list of valid values, see ``LOG_LEVEL``. 487 Default value is 40 (LOG_LEVEL_INFO). 488 489- ``FAULT_INJECTION_SUPPORT``: ARMv8.4 extensions introduced support for fault 490 injection from lower ELs, and this build option enables lower ELs to use 491 Error Records accessed via System Registers to inject faults. This is 492 applicable only to AArch64 builds. 493 494 This feature is intended for testing purposes only, and is advisable to keep 495 disabled for production images. 496 497- ``FEATURE_DETECTION``: Boolean option to enable the architectural features 498 detection mechanism. It detects whether the Architectural features enabled 499 through feature specific build flags are supported by the PE or not by 500 validating them either at boot phase or at runtime based on the value 501 possessed by the feature flag (0 to 2) and report error messages at an early 502 stage. 503 504 This prevents and benefits us from EL3 runtime exceptions during context save 505 and restore routines guarded by these build flags. Henceforth validating them 506 before their usage provides more control on the actions taken under them. 507 508 The mechanism permits the build flags to take values 0, 1 or 2 and 509 evaluates them accordingly. 510 511 Lets consider ``ENABLE_FEAT_HCX``, build flag for ``FEAT_HCX`` as an example: 512 513 :: 514 515 ENABLE_FEAT_HCX = 0: Feature disabled statically at compile time. 516 ENABLE_FEAT_HCX = 1: Feature Enabled and the flag is validated at boottime. 517 ENABLE_FEAT_HCX = 2: Feature Enabled and the flag is validated at runtime. 518 519 In the above example, if the feature build flag, ``ENABLE_FEAT_HCX`` set to 520 0, feature is disabled statically during compilation. If it is defined as 1, 521 feature is validated, wherein FEAT_HCX is detected at boot time. In case not 522 implemented by the PE, a hard panic is generated. Finally, if the flag is set 523 to 2, feature is validated at runtime. 524 525 Note that the entire implementation is divided into two phases, wherein as 526 as part of phase-1 we are supporting the values 0,1. Value 2 is currently not 527 supported and is planned to be handled explicilty in phase-2 implementation. 528 529 FEATURE_DETECTION macro is disabled by default, and is currently an 530 experimental procedure. Platforms can explicitly make use of this by 531 mechanism, by enabling it to validate whether they have set their build flags 532 properly at an early phase. 533 534- ``FIP_NAME``: This is an optional build option which specifies the FIP 535 filename for the ``fip`` target. Default is ``fip.bin``. 536 537- ``FWU_FIP_NAME``: This is an optional build option which specifies the FWU 538 FIP filename for the ``fwu_fip`` target. Default is ``fwu_fip.bin``. 539 540- ``FW_ENC_STATUS``: Top level firmware's encryption numeric flag, values: 541 542 :: 543 544 0: Encryption is done with Secret Symmetric Key (SSK) which is common 545 for a class of devices. 546 1: Encryption is done with Binding Secret Symmetric Key (BSSK) which is 547 unique per device. 548 549 This flag depends on ``DECRYPTION_SUPPORT`` build flag. 550 551- ``GENERATE_COT``: Boolean flag used to build and execute the ``cert_create`` 552 tool to create certificates as per the Chain of Trust described in 553 :ref:`Trusted Board Boot`. The build system then calls ``fiptool`` to 554 include the certificates in the FIP and FWU_FIP. Default value is '0'. 555 556 Specify both ``TRUSTED_BOARD_BOOT=1`` and ``GENERATE_COT=1`` to include support 557 for the Trusted Board Boot feature in the BL1 and BL2 images, to generate 558 the corresponding certificates, and to include those certificates in the 559 FIP and FWU_FIP. 560 561 Note that if ``TRUSTED_BOARD_BOOT=0`` and ``GENERATE_COT=1``, the BL1 and BL2 562 images will not include support for Trusted Board Boot. The FIP will still 563 include the corresponding certificates. This FIP can be used to verify the 564 Chain of Trust on the host machine through other mechanisms. 565 566 Note that if ``TRUSTED_BOARD_BOOT=1`` and ``GENERATE_COT=0``, the BL1 and BL2 567 images will include support for Trusted Board Boot, but the FIP and FWU_FIP 568 will not include the corresponding certificates, causing a boot failure. 569 570- ``GICV2_G0_FOR_EL3``: Unlike GICv3, the GICv2 architecture doesn't have 571 inherent support for specific EL3 type interrupts. Setting this build option 572 to ``1`` assumes GICv2 *Group 0* interrupts are expected to target EL3, both 573 by :ref:`platform abstraction layer<platform Interrupt Controller API>` and 574 :ref:`Interrupt Management Framework<Interrupt Management Framework>`. 575 This allows GICv2 platforms to enable features requiring EL3 interrupt type. 576 This also means that all GICv2 Group 0 interrupts are delivered to EL3, and 577 the Secure Payload interrupts needs to be synchronously handed over to Secure 578 EL1 for handling. The default value of this option is ``0``, which means the 579 Group 0 interrupts are assumed to be handled by Secure EL1. 580 581- ``HANDLE_EA_EL3_FIRST_NS``: When set to ``1``, External Aborts and SError 582 Interrupts, resulting from errors in NS world, will be always trapped in 583 EL3 i.e. in BL31 at runtime. When set to ``0`` (default), these exceptions 584 will be trapped in the current exception level (or in EL1 if the current 585 exception level is EL0). 586 587- ``HW_ASSISTED_COHERENCY``: On most Arm systems to-date, platform-specific 588 software operations are required for CPUs to enter and exit coherency. 589 However, newer systems exist where CPUs' entry to and exit from coherency 590 is managed in hardware. Such systems require software to only initiate these 591 operations, and the rest is managed in hardware, minimizing active software 592 management. In such systems, this boolean option enables TF-A to carry out 593 build and run-time optimizations during boot and power management operations. 594 This option defaults to 0 and if it is enabled, then it implies 595 ``WARMBOOT_ENABLE_DCACHE_EARLY`` is also enabled. 596 597 If this flag is disabled while the platform which TF-A is compiled for 598 includes cores that manage coherency in hardware, then a compilation error is 599 generated. This is based on the fact that a system cannot have, at the same 600 time, cores that manage coherency in hardware and cores that don't. In other 601 words, a platform cannot have, at the same time, cores that require 602 ``HW_ASSISTED_COHERENCY=1`` and cores that require 603 ``HW_ASSISTED_COHERENCY=0``. 604 605 Note that, when ``HW_ASSISTED_COHERENCY`` is enabled, version 2 of 606 translation library (xlat tables v2) must be used; version 1 of translation 607 library is not supported. 608 609- ``INVERTED_MEMMAP``: memmap tool print by default lower addresses at the 610 bottom, higher addresses at the top. This build flag can be set to '1' to 611 invert this behavior. Lower addresses will be printed at the top and higher 612 addresses at the bottom. 613 614- ``JUNO_AARCH32_EL3_RUNTIME``: This build flag enables you to execute EL3 615 runtime software in AArch32 mode, which is required to run AArch32 on Juno. 616 By default this flag is set to '0'. Enabling this flag builds BL1 and BL2 in 617 AArch64 and facilitates the loading of ``SP_MIN`` and BL33 as AArch32 executable 618 images. 619 620- ``KEY_ALG``: This build flag enables the user to select the algorithm to be 621 used for generating the PKCS keys and subsequent signing of the certificate. 622 It accepts 5 values: ``rsa``, ``rsa_1_5``, ``ecdsa``, ``ecdsa-brainpool-regular`` 623 and ``ecdsa-brainpool-twisted``. The option ``rsa_1_5`` is the legacy PKCS#1 624 RSA 1.5 algorithm which is not TBBR compliant and is retained only for 625 compatibility. The default value of this flag is ``rsa`` which is the TBBR 626 compliant PKCS#1 RSA 2.1 scheme. 627 628- ``KEY_SIZE``: This build flag enables the user to select the key size for 629 the algorithm specified by ``KEY_ALG``. The valid values for ``KEY_SIZE`` 630 depend on the chosen algorithm and the cryptographic module. 631 632 +---------------------------+------------------------------------+ 633 | KEY_ALG | Possible key sizes | 634 +===========================+====================================+ 635 | rsa | 1024 , 2048 (default), 3072, 4096* | 636 +---------------------------+------------------------------------+ 637 | ecdsa | unavailable | 638 +---------------------------+------------------------------------+ 639 | ecdsa-brainpool-regular | unavailable | 640 +---------------------------+------------------------------------+ 641 | ecdsa-brainpool-twisted | unavailable | 642 +---------------------------+------------------------------------+ 643 644 645 * Only 2048 bits size is available with CryptoCell 712 SBROM release 1. 646 Only 3072 bits size is available with CryptoCell 712 SBROM release 2. 647 648- ``HASH_ALG``: This build flag enables the user to select the secure hash 649 algorithm. It accepts 3 values: ``sha256``, ``sha384`` and ``sha512``. 650 The default value of this flag is ``sha256``. 651 652- ``LDFLAGS``: Extra user options appended to the linkers' command line in 653 addition to the one set by the build system. 654 655- ``LOG_LEVEL``: Chooses the log level, which controls the amount of console log 656 output compiled into the build. This should be one of the following: 657 658 :: 659 660 0 (LOG_LEVEL_NONE) 661 10 (LOG_LEVEL_ERROR) 662 20 (LOG_LEVEL_NOTICE) 663 30 (LOG_LEVEL_WARNING) 664 40 (LOG_LEVEL_INFO) 665 50 (LOG_LEVEL_VERBOSE) 666 667 All log output up to and including the selected log level is compiled into 668 the build. The default value is 40 in debug builds and 20 in release builds. 669 670- ``MEASURED_BOOT``: Boolean flag to include support for the Measured Boot 671 feature. This flag can be enabled with ``TRUSTED_BOARD_BOOT`` in order to 672 provide trust that the code taking the measurements and recording them has 673 not been tampered with. 674 675 This option defaults to 0. 676 677- ``DRTM_SUPPORT``: Boolean flag to enable support for Dynamic Root of Trust 678 for Measurement (DRTM). This feature has trust dependency on BL31 for taking 679 the measurements and recording them as per `PSA DRTM specification`_. For 680 platforms which use BL2 to load/authenticate BL31 ``TRUSTED_BOARD_BOOT`` can 681 be used and for the platforms which use ``RESET_TO_BL31`` platform owners 682 should have mechanism to authenticate BL31. This is an experimental feature. 683 684 This option defaults to 0. 685 686- ``NON_TRUSTED_WORLD_KEY``: This option is used when ``GENERATE_COT=1``. It 687 specifies the file that contains the Non-Trusted World private key in PEM 688 format. If ``SAVE_KEYS=1``, this file name will be used to save the key. 689 690- ``NS_BL2U``: Path to NS_BL2U image in the host file system. This image is 691 optional. It is only needed if the platform makefile specifies that it 692 is required in order to build the ``fwu_fip`` target. 693 694- ``NS_TIMER_SWITCH``: Enable save and restore for non-secure timer register 695 contents upon world switch. It can take either 0 (don't save and restore) or 696 1 (do save and restore). 0 is the default. An SPD may set this to 1 if it 697 wants the timer registers to be saved and restored. 698 699- ``OVERRIDE_LIBC``: This option allows platforms to override the default libc 700 for the BL image. It can be either 0 (include) or 1 (remove). The default 701 value is 0. 702 703- ``PL011_GENERIC_UART``: Boolean option to indicate the PL011 driver that 704 the underlying hardware is not a full PL011 UART but a minimally compliant 705 generic UART, which is a subset of the PL011. The driver will not access 706 any register that is not part of the SBSA generic UART specification. 707 Default value is 0 (a full PL011 compliant UART is present). 708 709- ``PLAT``: Choose a platform to build TF-A for. The chosen platform name 710 must be subdirectory of any depth under ``plat/``, and must contain a 711 platform makefile named ``platform.mk``. For example, to build TF-A for the 712 Arm Juno board, select PLAT=juno. 713 714- ``PRELOADED_BL33_BASE``: This option enables booting a preloaded BL33 image 715 instead of the normal boot flow. When defined, it must specify the entry 716 point address for the preloaded BL33 image. This option is incompatible with 717 ``EL3_PAYLOAD_BASE``. If both are defined, ``EL3_PAYLOAD_BASE`` has priority 718 over ``PRELOADED_BL33_BASE``. 719 720- ``PROGRAMMABLE_RESET_ADDRESS``: This option indicates whether the reset 721 vector address can be programmed or is fixed on the platform. It can take 722 either 0 (fixed) or 1 (programmable). Default is 0. If the platform has a 723 programmable reset address, it is expected that a CPU will start executing 724 code directly at the right address, both on a cold and warm reset. In this 725 case, there is no need to identify the entrypoint on boot and the boot path 726 can be optimised. The ``plat_get_my_entrypoint()`` platform porting interface 727 does not need to be implemented in this case. 728 729- ``PSCI_EXTENDED_STATE_ID``: As per PSCI1.0 Specification, there are 2 formats 730 possible for the PSCI power-state parameter: original and extended State-ID 731 formats. This flag if set to 1, configures the generic PSCI layer to use the 732 extended format. The default value of this flag is 0, which means by default 733 the original power-state format is used by the PSCI implementation. This flag 734 should be specified by the platform makefile and it governs the return value 735 of PSCI_FEATURES API for CPU_SUSPEND smc function id. When this option is 736 enabled on Arm platforms, the option ``ARM_RECOM_STATE_ID_ENC`` needs to be 737 set to 1 as well. 738 739- ``PSCI_OS_INIT_MODE``: Boolean flag to enable support for optional PSCI 740 OS-initiated mode. This option defaults to 0. 741 742- ``RAS_EXTENSION``: Numeric value to enable Armv8.2 RAS features. RAS features 743 are an optional extension for pre-Armv8.2 CPUs, but are mandatory for Armv8.2 744 or later CPUs. This flag can take the values 0 to 2, to align with the 745 ``FEATURE_DETECTION`` mechanism. 746 747 When ``RAS_EXTENSION`` is set to ``1``, ``HANDLE_EA_EL3_FIRST_NS`` must also be 748 set to ``1``. 749 750 This option is disabled by default. 751 752- ``RESET_TO_BL31``: Enable BL31 entrypoint as the CPU reset vector instead 753 of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 754 entrypoint) or 1 (CPU reset to BL31 entrypoint). 755 The default value is 0. 756 757- ``RESET_TO_BL31_WITH_PARAMS``: If ``RESET_TO_BL31`` has been enabled, setting 758 this additional option guarantees that the input registers are not cleared 759 therefore allowing parameters to be passed to the BL31 entrypoint. 760 The default value is 0. 761 762- ``RESET_TO_SP_MIN``: SP_MIN is the minimal AArch32 Secure Payload provided 763 in TF-A. This flag configures SP_MIN entrypoint as the CPU reset vector 764 instead of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 765 entrypoint) or 1 (CPU reset to SP_MIN entrypoint). The default value is 0. 766 767- ``ROT_KEY``: This option is used when ``GENERATE_COT=1``. It specifies the 768 file that contains the ROT private key in PEM format and enforces public key 769 hash generation. If ``SAVE_KEYS=1``, this 770 file name will be used to save the key. 771 772- ``SAVE_KEYS``: This option is used when ``GENERATE_COT=1``. It tells the 773 certificate generation tool to save the keys used to establish the Chain of 774 Trust. Allowed options are '0' or '1'. Default is '0' (do not save). 775 776- ``SCP_BL2``: Path to SCP_BL2 image in the host file system. This image is optional. 777 If a SCP_BL2 image is present then this option must be passed for the ``fip`` 778 target. 779 780- ``SCP_BL2_KEY``: This option is used when ``GENERATE_COT=1``. It specifies the 781 file that contains the SCP_BL2 private key in PEM format. If ``SAVE_KEYS=1``, 782 this file name will be used to save the key. 783 784- ``SCP_BL2U``: Path to SCP_BL2U image in the host file system. This image is 785 optional. It is only needed if the platform makefile specifies that it 786 is required in order to build the ``fwu_fip`` target. 787 788- ``SDEI_SUPPORT``: Setting this to ``1`` enables support for Software 789 Delegated Exception Interface to BL31 image. This defaults to ``0``. 790 791 When set to ``1``, the build option ``EL3_EXCEPTION_HANDLING`` must also be 792 set to ``1``. 793 794- ``SEPARATE_CODE_AND_RODATA``: Whether code and read-only data should be 795 isolated on separate memory pages. This is a trade-off between security and 796 memory usage. See "Isolating code and read-only data on separate memory 797 pages" section in :ref:`Firmware Design`. This flag is disabled by default 798 and affects all BL images. 799 800- ``SEPARATE_NOBITS_REGION``: Setting this option to ``1`` allows the NOBITS 801 sections of BL31 (.bss, stacks, page tables, and coherent memory) to be 802 allocated in RAM discontiguous from the loaded firmware image. When set, the 803 platform is expected to provide definitions for ``BL31_NOBITS_BASE`` and 804 ``BL31_NOBITS_LIMIT``. When the option is ``0`` (the default), NOBITS 805 sections are placed in RAM immediately following the loaded firmware image. 806 807- ``SEPARATE_BL2_NOLOAD_REGION``: Setting this option to ``1`` allows the 808 NOLOAD sections of BL2 (.bss, stacks, page tables) to be allocated in RAM 809 discontiguous from loaded firmware images. When set, the platform need to 810 provide definitions of ``BL2_NOLOAD_START`` and ``BL2_NOLOAD_LIMIT``. This 811 flag is disabled by default and NOLOAD sections are placed in RAM immediately 812 following the loaded firmware image. 813 814- ``SMC_PCI_SUPPORT``: This option allows platforms to handle PCI configuration 815 access requests via a standard SMCCC defined in `DEN0115`_. When combined with 816 UEFI+ACPI this can provide a certain amount of OS forward compatibility 817 with newer platforms that aren't ECAM compliant. 818 819- ``SPD``: Choose a Secure Payload Dispatcher component to be built into TF-A. 820 This build option is only valid if ``ARCH=aarch64``. The value should be 821 the path to the directory containing the SPD source, relative to 822 ``services/spd/``; the directory is expected to contain a makefile called 823 ``<spd-value>.mk``. The SPM Dispatcher standard service is located in 824 services/std_svc/spmd and enabled by ``SPD=spmd``. The SPM Dispatcher 825 cannot be enabled when the ``SPM_MM`` option is enabled. 826 827- ``SPIN_ON_BL1_EXIT``: This option introduces an infinite loop in BL1. It can 828 take either 0 (no loop) or 1 (add a loop). 0 is the default. This loop stops 829 execution in BL1 just before handing over to BL31. At this point, all 830 firmware images have been loaded in memory, and the MMU and caches are 831 turned off. Refer to the "Debugging options" section for more details. 832 833- ``SPMC_AT_EL3`` : This boolean option is used jointly with the SPM 834 Dispatcher option (``SPD=spmd``). When enabled (1) it indicates the SPMC 835 component runs at the EL3 exception level. The default value is ``0`` ( 836 disabled). This configuration supports pre-Armv8.4 platforms (aka not 837 implementing the ``FEAT_SEL2`` extension). This is an experimental feature. 838 839- ``SPMC_OPTEE`` : This boolean option is used jointly with the SPM 840 Dispatcher option (``SPD=spmd``) and with ``SPMD_SPM_AT_SEL2=0`` to 841 indicate that the SPMC at S-EL1 is OP-TEE and an OP-TEE specific loading 842 mechanism should be used. 843 844- ``SPMD_SPM_AT_SEL2`` : This boolean option is used jointly with the SPM 845 Dispatcher option (``SPD=spmd``). When enabled (1) it indicates the SPMC 846 component runs at the S-EL2 exception level provided by the ``FEAT_SEL2`` 847 extension. This is the default when enabling the SPM Dispatcher. When 848 disabled (0) it indicates the SPMC component runs at the S-EL1 execution 849 state or at EL3 if ``SPMC_AT_EL3`` is enabled. The latter configurations 850 support pre-Armv8.4 platforms (aka not implementing the ``FEAT_SEL2`` 851 extension). 852 853- ``SPM_MM`` : Boolean option to enable the Management Mode (MM)-based Secure 854 Partition Manager (SPM) implementation. The default value is ``0`` 855 (disabled). This option cannot be enabled (``1``) when SPM Dispatcher is 856 enabled (``SPD=spmd``). 857 858- ``SP_LAYOUT_FILE``: Platform provided path to JSON file containing the 859 description of secure partitions. The build system will parse this file and 860 package all secure partition blobs into the FIP. This file is not 861 necessarily part of TF-A tree. Only available when ``SPD=spmd``. 862 863- ``SP_MIN_WITH_SECURE_FIQ``: Boolean flag to indicate the SP_MIN handles 864 secure interrupts (caught through the FIQ line). Platforms can enable 865 this directive if they need to handle such interruption. When enabled, 866 the FIQ are handled in monitor mode and non secure world is not allowed 867 to mask these events. Platforms that enable FIQ handling in SP_MIN shall 868 implement the api ``sp_min_plat_fiq_handler()``. The default value is 0. 869 870- ``SVE_VECTOR_LEN``: SVE vector length to configure in ZCR_EL3. 871 Platforms can configure this if they need to lower the hardware 872 limit, for example due to asymmetric configuration or limitations of 873 software run at lower ELs. The default is the architectural maximum 874 of 2048 which should be suitable for most configurations, the 875 hardware will limit the effective VL to the maximum physically supported 876 VL. 877 878- ``TRNG_SUPPORT``: Setting this to ``1`` enables support for True 879 Random Number Generator Interface to BL31 image. This defaults to ``0``. 880 881- ``TRUSTED_BOARD_BOOT``: Boolean flag to include support for the Trusted Board 882 Boot feature. When set to '1', BL1 and BL2 images include support to load 883 and verify the certificates and images in a FIP, and BL1 includes support 884 for the Firmware Update. The default value is '0'. Generation and inclusion 885 of certificates in the FIP and FWU_FIP depends upon the value of the 886 ``GENERATE_COT`` option. 887 888 .. warning:: 889 This option depends on ``CREATE_KEYS`` to be enabled. If the keys 890 already exist in disk, they will be overwritten without further notice. 891 892- ``TRUSTED_WORLD_KEY``: This option is used when ``GENERATE_COT=1``. It 893 specifies the file that contains the Trusted World private key in PEM 894 format. If ``SAVE_KEYS=1``, this file name will be used to save the key. 895 896- ``TSP_INIT_ASYNC``: Choose BL32 initialization method as asynchronous or 897 synchronous, (see "Initializing a BL32 Image" section in 898 :ref:`Firmware Design`). It can take the value 0 (BL32 is initialized using 899 synchronous method) or 1 (BL32 is initialized using asynchronous method). 900 Default is 0. 901 902- ``TSP_NS_INTR_ASYNC_PREEMPT``: A non zero value enables the interrupt 903 routing model which routes non-secure interrupts asynchronously from TSP 904 to EL3 causing immediate preemption of TSP. The EL3 is responsible 905 for saving and restoring the TSP context in this routing model. The 906 default routing model (when the value is 0) is to route non-secure 907 interrupts to TSP allowing it to save its context and hand over 908 synchronously to EL3 via an SMC. 909 910 .. note:: 911 When ``EL3_EXCEPTION_HANDLING`` is ``1``, ``TSP_NS_INTR_ASYNC_PREEMPT`` 912 must also be set to ``1``. 913 914- ``TWED_DELAY``: Numeric value to be set in order to delay the trapping of 915 WFE instruction. ``ENABLE_FEAT_TWED`` build option must be enabled to set 916 this delay. It can take values in the range (0-15). Default value is ``0`` 917 and based on this value, 2^(TWED_DELAY + 8) cycles will be delayed. 918 Platforms need to explicitly update this value based on their requirements. 919 920- ``USE_ARM_LINK``: This flag determines whether to enable support for ARM 921 linker. When the ``LINKER`` build variable points to the armlink linker, 922 this flag is enabled automatically. To enable support for armlink, platforms 923 will have to provide a scatter file for the BL image. Currently, Tegra 924 platforms use the armlink support to compile BL3-1 images. 925 926- ``USE_COHERENT_MEM``: This flag determines whether to include the coherent 927 memory region in the BL memory map or not (see "Use of Coherent memory in 928 TF-A" section in :ref:`Firmware Design`). It can take the value 1 929 (Coherent memory region is included) or 0 (Coherent memory region is 930 excluded). Default is 1. 931 932- ``USE_DEBUGFS``: When set to 1 this option activates an EXPERIMENTAL feature 933 exposing a virtual filesystem interface through BL31 as a SiP SMC function. 934 Default is 0. 935 936- ``ARM_IO_IN_DTB``: This flag determines whether to use IO based on the 937 firmware configuration framework. This will move the io_policies into a 938 configuration device tree, instead of static structure in the code base. 939 940- ``COT_DESC_IN_DTB``: This flag determines whether to create COT descriptors 941 at runtime using fconf. If this flag is enabled, COT descriptors are 942 statically captured in tb_fw_config file in the form of device tree nodes 943 and properties. Currently, COT descriptors used by BL2 are moved to the 944 device tree and COT descriptors used by BL1 are retained in the code 945 base statically. 946 947- ``SDEI_IN_FCONF``: This flag determines whether to configure SDEI setup in 948 runtime using firmware configuration framework. The platform specific SDEI 949 shared and private events configuration is retrieved from device tree rather 950 than static C structures at compile time. This is only supported if 951 SDEI_SUPPORT build flag is enabled. 952 953- ``SEC_INT_DESC_IN_FCONF``: This flag determines whether to configure Group 0 954 and Group1 secure interrupts using the firmware configuration framework. The 955 platform specific secure interrupt property descriptor is retrieved from 956 device tree in runtime rather than depending on static C structure at compile 957 time. 958 959- ``USE_ROMLIB``: This flag determines whether library at ROM will be used. 960 This feature creates a library of functions to be placed in ROM and thus 961 reduces SRAM usage. Refer to :ref:`Library at ROM` for further details. Default 962 is 0. 963 964- ``V``: Verbose build. If assigned anything other than 0, the build commands 965 are printed. Default is 0. 966 967- ``VERSION_STRING``: String used in the log output for each TF-A image. 968 Defaults to a string formed by concatenating the version number, build type 969 and build string. 970 971- ``W``: Warning level. Some compiler warning options of interest have been 972 regrouped and put in the root Makefile. This flag can take the values 0 to 3, 973 each level enabling more warning options. Default is 0. 974 975 This option is closely related to the ``E`` option, which enables 976 ``-Werror``. 977 978 - ``W=0`` (default) 979 980 Enables a wide assortment of warnings, most notably ``-Wall`` and 981 ``-Wextra``, as well as various bad practices and things that are likely to 982 result in errors. Includes some compiler specific flags. No warnings are 983 expected at this level for any build. 984 985 - ``W=1`` 986 987 Enables warnings we want the generic build to include but are too time 988 consuming to fix at the moment. It re-enables warnings taken out for 989 ``W=0`` builds (a few of the ``-Wextra`` additions). This level is expected 990 to eventually be merged into ``W=0``. Some warnings are expected on some 991 builds, but new contributions should not introduce new ones. 992 993 - ``W=2`` (recommended) 994 995 Enables warnings we want the generic build to include but cannot be enabled 996 due to external libraries. This level is expected to eventually be merged 997 into ``W=0``. Lots of warnings are expected, primarily from external 998 libraries like zlib and compiler-rt, but new controbutions should not 999 introduce new ones. 1000 1001 - ``W=3`` 1002 1003 Enables warnings that are informative but not necessary and generally too 1004 verbose and frequently ignored. A very large number of warnings are 1005 expected. 1006 1007 The exact set of warning flags depends on the compiler and TF-A warning 1008 level, however they are all succinctly set in the top-level Makefile. Please 1009 refer to the `GCC`_ or `Clang`_ documentation for more information on the 1010 individual flags. 1011 1012- ``WARMBOOT_ENABLE_DCACHE_EARLY`` : Boolean option to enable D-cache early on 1013 the CPU after warm boot. This is applicable for platforms which do not 1014 require interconnect programming to enable cache coherency (eg: single 1015 cluster platforms). If this option is enabled, then warm boot path 1016 enables D-caches immediately after enabling MMU. This option defaults to 0. 1017 1018- ``SUPPORT_STACK_MEMTAG``: This flag determines whether to enable memory 1019 tagging for stack or not. It accepts 2 values: ``yes`` and ``no``. The 1020 default value of this flag is ``no``. Note this option must be enabled only 1021 for ARM architecture greater than Armv8.5-A. 1022 1023- ``ERRATA_SPECULATIVE_AT``: This flag determines whether to enable ``AT`` 1024 speculative errata workaround or not. It accepts 2 values: ``1`` and ``0``. 1025 The default value of this flag is ``0``. 1026 1027 ``AT`` speculative errata workaround disables stage1 page table walk for 1028 lower ELs (EL1 and EL0) in EL3 so that ``AT`` speculative fetch at any point 1029 produces either the correct result or failure without TLB allocation. 1030 1031 This boolean option enables errata for all below CPUs. 1032 1033 +---------+--------------+-------------------------+ 1034 | Errata | CPU | Workaround Define | 1035 +=========+==============+=========================+ 1036 | 1165522 | Cortex-A76 | ``ERRATA_A76_1165522`` | 1037 +---------+--------------+-------------------------+ 1038 | 1319367 | Cortex-A72 | ``ERRATA_A72_1319367`` | 1039 +---------+--------------+-------------------------+ 1040 | 1319537 | Cortex-A57 | ``ERRATA_A57_1319537`` | 1041 +---------+--------------+-------------------------+ 1042 | 1530923 | Cortex-A55 | ``ERRATA_A55_1530923`` | 1043 +---------+--------------+-------------------------+ 1044 | 1530924 | Cortex-A53 | ``ERRATA_A53_1530924`` | 1045 +---------+--------------+-------------------------+ 1046 1047 .. note:: 1048 This option is enabled by build only if platform sets any of above defines 1049 mentioned in ’Workaround Define' column in the table. 1050 If this option is enabled for the EL3 software then EL2 software also must 1051 implement this workaround due to the behaviour of the errata mentioned 1052 in new SDEN document which will get published soon. 1053 1054- ``RAS_TRAP_NS_ERR_REC_ACCESS``: This flag enables/disables the SCR_EL3.TERR 1055 bit, to trap access to the RAS ERR and RAS ERX registers from lower ELs. 1056 This flag is disabled by default. 1057 1058- ``OPENSSL_DIR``: This option is used to provide the path to a directory on the 1059 host machine where a custom installation of OpenSSL is located, which is used 1060 to build the certificate generation, firmware encryption and FIP tools. If 1061 this option is not set, the default OS installation will be used. 1062 1063- ``USE_SP804_TIMER``: Use the SP804 timer instead of the Generic Timer for 1064 functions that wait for an arbitrary time length (udelay and mdelay). The 1065 default value is 0. 1066 1067- ``ENABLE_BRBE_FOR_NS``: Numeric value to enable access to the branch record 1068 buffer registers from NS ELs when FEAT_BRBE is implemented. BRBE is an 1069 optional architectural feature for AArch64. This flag can take the values 1070 0 to 2, to align with the ``FEATURE_DETECTION`` mechanism. The default is 0 1071 and it is automatically disabled when the target architecture is AArch32. 1072 1073- ``ENABLE_TRBE_FOR_NS``: Numeric value to enable access of trace buffer 1074 control registers from NS ELs, NS-EL2 or NS-EL1(when NS-EL2 is implemented 1075 but unused) when FEAT_TRBE is implemented. TRBE is an optional architectural 1076 feature for AArch64. This flag can take the values 0 to 2, to align with the 1077 ``FEATURE_DETECTION`` mechanism. The default is 0 and it is automatically 1078 disabled when the target architecture is AArch32. 1079 1080- ``ENABLE_SYS_REG_TRACE_FOR_NS``: Numeric value to enable trace system 1081 registers access from NS ELs, NS-EL2 or NS-EL1 (when NS-EL2 is implemented 1082 but unused). This feature is available if trace unit such as ETMv4.x, and 1083 ETE(extending ETM feature) is implemented. This flag can take the values 1084 0 to 2, to align with the ``FEATURE_DETECTION`` mechanism. The default is 0. 1085 1086- ``ENABLE_TRF_FOR_NS``: Numeric value to enable trace filter control registers 1087 access from NS ELs, NS-EL2 or NS-EL1 (when NS-EL2 is implemented but unused), 1088 if FEAT_TRF is implemented. This flag can take the values 0 to 2, to align 1089 with the ``FEATURE_DETECTION`` mechanism. This flag is disabled by default. 1090 1091- ``PLAT_RSS_NOT_SUPPORTED``: Boolean option to enable the usage of the PSA 1092 APIs on platforms that doesn't support RSS (providing Arm CCA HES 1093 functionalities). When enabled (``1``), a mocked version of the APIs are used. 1094 The default value is 0. 1095 1096- ``CONDITIONAL_CMO``: Boolean option to enable call to platform-defined routine 1097 ``plat_can_cmo`` which will return zero if cache management operations should 1098 be skipped and non-zero otherwise. By default, this option is disabled which 1099 means platform hook won't be checked and CMOs will always be performed when 1100 related functions are called. 1101 1102GICv3 driver options 1103-------------------- 1104 1105GICv3 driver files are included using directive: 1106 1107``include drivers/arm/gic/v3/gicv3.mk`` 1108 1109The driver can be configured with the following options set in the platform 1110makefile: 1111 1112- ``GICV3_SUPPORT_GIC600``: Add support for the GIC-600 variants of GICv3. 1113 Enabling this option will add runtime detection support for the 1114 GIC-600, so is safe to select even for a GIC500 implementation. 1115 This option defaults to 0. 1116 1117- ``GICV3_SUPPORT_GIC600AE_FMU``: Add support for the Fault Management Unit 1118 for GIC-600 AE. Enabling this option will introduce support to initialize 1119 the FMU. Platforms should call the init function during boot to enable the 1120 FMU and its safety mechanisms. This option defaults to 0. 1121 1122- ``GICV3_IMPL_GIC600_MULTICHIP``: Selects GIC-600 variant with multichip 1123 functionality. This option defaults to 0 1124 1125- ``GICV3_OVERRIDE_DISTIF_PWR_OPS``: Allows override of default implementation 1126 of ``arm_gicv3_distif_pre_save`` and ``arm_gicv3_distif_post_restore`` 1127 functions. This is required for FVP platform which need to simulate GIC save 1128 and restore during SYSTEM_SUSPEND without powering down GIC. Default is 0. 1129 1130- ``GIC_ENABLE_V4_EXTN`` : Enables GICv4 related changes in GICv3 driver. 1131 This option defaults to 0. 1132 1133- ``GIC_EXT_INTID``: When set to ``1``, GICv3 driver will support extended 1134 PPI (1056-1119) and SPI (4096-5119) range. This option defaults to 0. 1135 1136Debugging options 1137----------------- 1138 1139To compile a debug version and make the build more verbose use 1140 1141.. code:: shell 1142 1143 make PLAT=<platform> DEBUG=1 V=1 all 1144 1145AArch64 GCC 11 uses DWARF version 5 debugging symbols by default. Some tools 1146(for example Arm-DS) might not support this and may need an older version of 1147DWARF symbols to be emitted by GCC. This can be achieved by using the 1148``-gdwarf-<version>`` flag, with the version being set to 2, 3, 4 or 5. Setting 1149the version to 4 is recommended for Arm-DS. 1150 1151When debugging logic problems it might also be useful to disable all compiler 1152optimizations by using ``-O0``. 1153 1154.. warning:: 1155 Using ``-O0`` could cause output images to be larger and base addresses 1156 might need to be recalculated (see the **Memory layout on Arm development 1157 platforms** section in the :ref:`Firmware Design`). 1158 1159Extra debug options can be passed to the build system by setting ``CFLAGS`` or 1160``LDFLAGS``: 1161 1162.. code:: shell 1163 1164 CFLAGS='-O0 -gdwarf-2' \ 1165 make PLAT=<platform> DEBUG=1 V=1 all 1166 1167Note that using ``-Wl,`` style compilation driver options in ``CFLAGS`` will be 1168ignored as the linker is called directly. 1169 1170It is also possible to introduce an infinite loop to help in debugging the 1171post-BL2 phase of TF-A. This can be done by rebuilding BL1 with the 1172``SPIN_ON_BL1_EXIT=1`` build flag. Refer to the :ref:`build_options_common` 1173section. In this case, the developer may take control of the target using a 1174debugger when indicated by the console output. When using Arm-DS, the following 1175commands can be used: 1176 1177:: 1178 1179 # Stop target execution 1180 interrupt 1181 1182 # 1183 # Prepare your debugging environment, e.g. set breakpoints 1184 # 1185 1186 # Jump over the debug loop 1187 set var $AARCH64::$Core::$PC = $AARCH64::$Core::$PC + 4 1188 1189 # Resume execution 1190 continue 1191 1192Firmware update options 1193----------------------- 1194 1195- ``NR_OF_FW_BANKS``: Define the number of firmware banks. This flag is used 1196 in defining the firmware update metadata structure. This flag is by default 1197 set to '2'. 1198 1199- ``NR_OF_IMAGES_IN_FW_BANK``: Define the number of firmware images in each 1200 firmware bank. Each firmware bank must have the same number of images as per 1201 the `PSA FW update specification`_. 1202 This flag is used in defining the firmware update metadata structure. This 1203 flag is by default set to '1'. 1204 1205- ``PSA_FWU_SUPPORT``: Enable the firmware update mechanism as per the 1206 `PSA FW update specification`_. The default value is 0, and this is an 1207 experimental feature. 1208 PSA firmware update implementation has some limitations, such as BL2 is 1209 not part of the protocol-updatable images, if BL2 needs to be updated, then 1210 it should be done through another platform-defined mechanism, and it assumes 1211 that the platform's hardware supports CRC32 instructions. 1212 1213-------------- 1214 1215*Copyright (c) 2019-2023, Arm Limited. All rights reserved.* 1216 1217.. _DEN0115: https://developer.arm.com/docs/den0115/latest 1218.. _PSA FW update specification: https://developer.arm.com/documentation/den0118/a/ 1219.. _PSA DRTM specification: https://developer.arm.com/documentation/den0113/a 1220.. _GCC: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html 1221.. _Clang: https://clang.llvm.org/docs/DiagnosticsReference.html 1222