1Build Options 2============= 3 4The TF-A build system supports the following build options. Unless mentioned 5otherwise, these options are expected to be specified at the build command 6line and are not to be modified in any component makefiles. Note that the 7build system doesn't track dependency for build options. Therefore, if any of 8the build options are changed from a previous build, a clean build must be 9performed. 10 11.. _build_options_common: 12 13Common build options 14-------------------- 15 16- ``AARCH32_INSTRUCTION_SET``: Choose the AArch32 instruction set that the 17 compiler should use. Valid values are T32 and A32. It defaults to T32 due to 18 code having a smaller resulting size. 19 20- ``AARCH32_SP`` : Choose the AArch32 Secure Payload component to be built as 21 as the BL32 image when ``ARCH=aarch32``. The value should be the path to the 22 directory containing the SP source, relative to the ``bl32/``; the directory 23 is expected to contain a makefile called ``<aarch32_sp-value>.mk``. 24 25- ``AMU_RESTRICT_COUNTERS``: Register reads to the group 1 counters will return 26 zero at all but the highest implemented exception level. Reads from the 27 memory mapped view are unaffected by this control. 28 29- ``ARCH`` : Choose the target build architecture for TF-A. It can take either 30 ``aarch64`` or ``aarch32`` as values. By default, it is defined to 31 ``aarch64``. 32 33- ``ARM_ARCH_FEATURE``: Optional Arm Architecture build option which specifies 34 one or more feature modifiers. This option has the form ``[no]feature+...`` 35 and defaults to ``none``. It translates into compiler option 36 ``-march=armvX[.Y]-a+[no]feature+...``. See compiler's documentation for the 37 list of supported feature modifiers. 38 39- ``ARM_ARCH_MAJOR``: The major version of Arm Architecture to target when 40 compiling TF-A. Its value must be numeric, and defaults to 8 . See also, 41 *Armv8 Architecture Extensions* and *Armv7 Architecture Extensions* in 42 :ref:`Firmware Design`. 43 44- ``ARM_ARCH_MINOR``: The minor version of Arm Architecture to target when 45 compiling TF-A. Its value must be a numeric, and defaults to 0. See also, 46 *Armv8 Architecture Extensions* in :ref:`Firmware Design`. 47 48- ``BL2``: This is an optional build option which specifies the path to BL2 49 image for the ``fip`` target. In this case, the BL2 in the TF-A will not be 50 built. 51 52- ``BL2U``: This is an optional build option which specifies the path to 53 BL2U image. In this case, the BL2U in TF-A will not be built. 54 55- ``BL2_AT_EL3``: This is an optional build option that enables the use of 56 BL2 at EL3 execution level. 57 58- ``BL2_ENABLE_SP_LOAD``: Boolean option to enable loading SP packages from the 59 FIP. Automatically enabled if ``SP_LAYOUT_FILE`` is provided. 60 61- ``BL2_IN_XIP_MEM``: In some use-cases BL2 will be stored in eXecute In Place 62 (XIP) memory, like BL1. In these use-cases, it is necessary to initialize 63 the RW sections in RAM, while leaving the RO sections in place. This option 64 enable this use-case. For now, this option is only supported when BL2_AT_EL3 65 is set to '1'. 66 67- ``BL31``: This is an optional build option which specifies the path to 68 BL31 image for the ``fip`` target. In this case, the BL31 in TF-A will not 69 be built. 70 71- ``BL31_KEY``: This option is used when ``GENERATE_COT=1``. It specifies the 72 file that contains the BL31 private key in PEM format. If ``SAVE_KEYS=1``, 73 this file name will be used to save the key. 74 75- ``BL32``: This is an optional build option which specifies the path to 76 BL32 image for the ``fip`` target. In this case, the BL32 in TF-A will not 77 be built. 78 79- ``BL32_EXTRA1``: This is an optional build option which specifies the path to 80 Trusted OS Extra1 image for the ``fip`` target. 81 82- ``BL32_EXTRA2``: This is an optional build option which specifies the path to 83 Trusted OS Extra2 image for the ``fip`` target. 84 85- ``BL32_KEY``: This option is used when ``GENERATE_COT=1``. It specifies the 86 file that contains the BL32 private key in PEM format. If ``SAVE_KEYS=1``, 87 this file name will be used to save the key. 88 89- ``BL33``: Path to BL33 image in the host file system. This is mandatory for 90 ``fip`` target in case TF-A BL2 is used. 91 92- ``BL33_KEY``: This option is used when ``GENERATE_COT=1``. It specifies the 93 file that contains the BL33 private key in PEM format. If ``SAVE_KEYS=1``, 94 this file name will be used to save the key. 95 96- ``BRANCH_PROTECTION``: Numeric value to enable ARMv8.3 Pointer Authentication 97 and ARMv8.5 Branch Target Identification support for TF-A BL images themselves. 98 If enabled, it is needed to use a compiler that supports the option 99 ``-mbranch-protection``. Selects the branch protection features to use: 100- 0: Default value turns off all types of branch protection 101- 1: Enables all types of branch protection features 102- 2: Return address signing to its standard level 103- 3: Extend the signing to include leaf functions 104- 4: Turn on branch target identification mechanism 105 106 The table below summarizes ``BRANCH_PROTECTION`` values, GCC compilation options 107 and resulting PAuth/BTI features. 108 109 +-------+--------------+-------+-----+ 110 | Value | GCC option | PAuth | BTI | 111 +=======+==============+=======+=====+ 112 | 0 | none | N | N | 113 +-------+--------------+-------+-----+ 114 | 1 | standard | Y | Y | 115 +-------+--------------+-------+-----+ 116 | 2 | pac-ret | Y | N | 117 +-------+--------------+-------+-----+ 118 | 3 | pac-ret+leaf | Y | N | 119 +-------+--------------+-------+-----+ 120 | 4 | bti | N | Y | 121 +-------+--------------+-------+-----+ 122 123 This option defaults to 0. 124 Note that Pointer Authentication is enabled for Non-secure world 125 irrespective of the value of this option if the CPU supports it. 126 127- ``BUILD_MESSAGE_TIMESTAMP``: String used to identify the time and date of the 128 compilation of each build. It must be set to a C string (including quotes 129 where applicable). Defaults to a string that contains the time and date of 130 the compilation. 131 132- ``BUILD_STRING``: Input string for VERSION_STRING, which allows the TF-A 133 build to be uniquely identified. Defaults to the current git commit id. 134 135- ``BUILD_BASE``: Output directory for the build. Defaults to ``./build`` 136 137- ``CFLAGS``: Extra user options appended on the compiler's command line in 138 addition to the options set by the build system. 139 140- ``COLD_BOOT_SINGLE_CPU``: This option indicates whether the platform may 141 release several CPUs out of reset. It can take either 0 (several CPUs may be 142 brought up) or 1 (only one CPU will ever be brought up during cold reset). 143 Default is 0. If the platform always brings up a single CPU, there is no 144 need to distinguish between primary and secondary CPUs and the boot path can 145 be optimised. The ``plat_is_my_cpu_primary()`` and 146 ``plat_secondary_cold_boot_setup()`` platform porting interfaces do not need 147 to be implemented in this case. 148 149- ``COT``: When Trusted Boot is enabled, selects the desired chain of trust. 150 Defaults to ``tbbr``. 151 152- ``CRASH_REPORTING``: A non-zero value enables a console dump of processor 153 register state when an unexpected exception occurs during execution of 154 BL31. This option defaults to the value of ``DEBUG`` - i.e. by default 155 this is only enabled for a debug build of the firmware. 156 157- ``CREATE_KEYS``: This option is used when ``GENERATE_COT=1``. It tells the 158 certificate generation tool to create new keys in case no valid keys are 159 present or specified. Allowed options are '0' or '1'. Default is '1'. 160 161- ``CTX_INCLUDE_AARCH32_REGS`` : Boolean option that, when set to 1, will cause 162 the AArch32 system registers to be included when saving and restoring the 163 CPU context. The option must be set to 0 for AArch64-only platforms (that 164 is on hardware that does not implement AArch32, or at least not at EL1 and 165 higher ELs). Default value is 1. 166 167- ``CTX_INCLUDE_EL2_REGS`` : This boolean option provides context save/restore 168 operations when entering/exiting an EL2 execution context. This is of primary 169 interest when Armv8.4-SecEL2 extension is implemented. Default is 0 (disabled). 170 This option must be equal to 1 (enabled) when ``SPD=spmd`` and 171 ``SPMD_SPM_AT_SEL2`` is set. 172 173- ``CTX_INCLUDE_FPREGS``: Boolean option that, when set to 1, will cause the FP 174 registers to be included when saving and restoring the CPU context. Default 175 is 0. 176 177- ``CTX_INCLUDE_MTE_REGS``: Numeric value to include Memory Tagging Extension 178 registers in cpu context. This must be enabled, if the platform wants to use 179 this feature in the Secure world and MTE is enabled at ELX. This flag can 180 take values 0 to 2, to align with the ``FEATURE_DETECTION`` mechanism. 181 Default value is 0. 182 183- ``CTX_INCLUDE_NEVE_REGS``: Numeric value, when set will cause the Armv8.4-NV 184 registers to be saved/restored when entering/exiting an EL2 execution 185 context. This flag can take values 0 to 2, to align with the 186 ``FEATURE_DETECTION`` mechanism. Default value is 0. 187 188- ``CTX_INCLUDE_PAUTH_REGS``: Numeric value to enable the Pointer 189 Authentication for Secure world. This will cause the ARMv8.3-PAuth registers 190 to be included when saving and restoring the CPU context as part of world 191 switch. This flag can take values 0 to 2, to align with ``FEATURE_DETECTION`` 192 mechanism. Default value is 0. 193 194 Note that Pointer Authentication is enabled for Non-secure world irrespective 195 of the value of this flag if the CPU supports it. 196 197- ``DEBUG``: Chooses between a debug and release build. It can take either 0 198 (release) or 1 (debug) as values. 0 is the default. 199 200- ``DECRYPTION_SUPPORT``: This build flag enables the user to select the 201 authenticated decryption algorithm to be used to decrypt firmware/s during 202 boot. It accepts 2 values: ``aes_gcm`` and ``none``. The default value of 203 this flag is ``none`` to disable firmware decryption which is an optional 204 feature as per TBBR. 205 206- ``DISABLE_BIN_GENERATION``: Boolean option to disable the generation 207 of the binary image. If set to 1, then only the ELF image is built. 208 0 is the default. 209 210- ``DISABLE_MTPMU``: Boolean option to disable FEAT_MTPMU if implemented 211 (Armv8.6 onwards). Its default value is 0 to keep consistency with platforms 212 that do not implement FEAT_MTPMU. For more information on FEAT_MTPMU, 213 check the latest Arm ARM. 214 215- ``DYN_DISABLE_AUTH``: Provides the capability to dynamically disable Trusted 216 Board Boot authentication at runtime. This option is meant to be enabled only 217 for development platforms. ``TRUSTED_BOARD_BOOT`` flag must be set if this 218 flag has to be enabled. 0 is the default. 219 220- ``E``: Boolean option to make warnings into errors. Default is 1. 221 222- ``EL3_PAYLOAD_BASE``: This option enables booting an EL3 payload instead of 223 the normal boot flow. It must specify the entry point address of the EL3 224 payload. Please refer to the "Booting an EL3 payload" section for more 225 details. 226 227- ``ENABLE_AMU``: Boolean option to enable Activity Monitor Unit extensions. 228 This is an optional architectural feature available on v8.4 onwards. Some 229 v8.2 implementations also implement an AMU and this option can be used to 230 enable this feature on those systems as well. Default is 0. 231 232- ``ENABLE_AMU_AUXILIARY_COUNTERS``: Enables support for AMU auxiliary counters 233 (also known as group 1 counters). These are implementation-defined counters, 234 and as such require additional platform configuration. Default is 0. 235 236- ``ENABLE_AMU_FCONF``: Enables configuration of the AMU through FCONF, which 237 allows platforms with auxiliary counters to describe them via the 238 ``HW_CONFIG`` device tree blob. Default is 0. 239 240- ``ENABLE_ASSERTIONS``: This option controls whether or not calls to ``assert()`` 241 are compiled out. For debug builds, this option defaults to 1, and calls to 242 ``assert()`` are left in place. For release builds, this option defaults to 0 243 and calls to ``assert()`` function are compiled out. This option can be set 244 independently of ``DEBUG``. It can also be used to hide any auxiliary code 245 that is only required for the assertion and does not fit in the assertion 246 itself. 247 248- ``ENABLE_BACKTRACE``: This option controls whether to enable backtrace 249 dumps or not. It is supported in both AArch64 and AArch32. However, in 250 AArch32 the format of the frame records are not defined in the AAPCS and they 251 are defined by the implementation. This implementation of backtrace only 252 supports the format used by GCC when T32 interworking is disabled. For this 253 reason enabling this option in AArch32 will force the compiler to only 254 generate A32 code. This option is enabled by default only in AArch64 debug 255 builds, but this behaviour can be overridden in each platform's Makefile or 256 in the build command line. 257 258- ``ENABLE_FEAT_AMUv1``: Numeric value to enable access to the HAFGRTR_EL2 259 (Hypervisor Activity Monitors Fine-Grained Read Trap Register) during EL2 260 to EL3 context save/restore operations. This flag can take the values 0 to 2, 261 to align with the ``FEATURE_DETECTION`` mechanism. It is an optional feature 262 available on v8.4 and onwards and must be set to either 1 or 2 alongside 263 ``ENABLE_FEAT_FGT``, to access the HAFGRTR_EL2 register. 264 Default value is ``0``. 265 266- ``ENABLE_FEAT_AMUv1p1``: Numeric value to enable the ``FEAT_AMUv1p1`` 267 extension. ``FEAT_AMUv1p1`` is an optional feature available on Arm v8.6 268 onwards. This flag can take the values 0 to 2, to align with the 269 ``FEATURE_DETECTION`` mechanism. Default value is ``0``. 270 271- ``ENABLE_FEAT_CSV2_2``: Numeric value to enable the ``FEAT_CSV2_2`` 272 extension. It allows access to the SCXTNUM_EL2 (Software Context Number) 273 register during EL2 context save/restore operations. ``FEAT_CSV2_2`` is an 274 optional feature available on Arm v8.0 onwards. This flag can take values 275 0 to 2, to align with the ``FEATURE_DETECTION`` mechanism. 276 Default value is ``0``. 277 278- ``ENABLE_FEAT_DIT``: Numeric value to enable ``FEAT_DIT`` (Data Independent 279 Timing) extension. It allows setting the ``DIT`` bit of PSTATE in EL3. 280 ``FEAT_DIT`` is a mandatory architectural feature and is enabled from v8.4 281 and upwards. This flag can take the values 0 to 2, to align with the 282 ``FEATURE_DETECTION`` mechanism. Default value is ``0``. 283 284- ``ENABLE_FEAT_ECV``: Numeric value to enable support for the Enhanced Counter 285 Virtualization feature, allowing for access to the CNTPOFF_EL2 (Counter-timer 286 Physical Offset register) during EL2 to EL3 context save/restore operations. 287 Its a mandatory architectural feature and is enabled from v8.6 and upwards. 288 This flag can take the values 0 to 2, to align with the ``FEATURE_DETECTION`` 289 mechanism. Default value is ``0``. 290 291- ``ENABLE_FEAT_FGT``: Numeric value to enable support for FGT (Fine Grain Traps) 292 feature allowing for access to the HDFGRTR_EL2 (Hypervisor Debug Fine-Grained 293 Read Trap Register) during EL2 to EL3 context save/restore operations. 294 Its a mandatory architectural feature and is enabled from v8.6 and upwards. 295 This flag can take the values 0 to 2, to align with the ``FEATURE_DETECTION`` 296 mechanism. Default value is ``0``. 297 298- ``ENABLE_FEAT_HCX``: Numeric value to set the bit SCR_EL3.HXEn in EL3 to 299 allow access to HCRX_EL2 (extended hypervisor control register) from EL2 as 300 well as adding HCRX_EL2 to the EL2 context save/restore operations. Its a 301 mandatory architectural feature and is enabled from v8.7 and upwards. This 302 flag can take the values 0 to 2, to align with the ``FEATURE_DETECTION`` 303 mechanism. Default value is ``0``. 304 305- ``ENABLE_FEAT_PAN``: Numeric value to enable the ``FEAT_PAN`` (Privileged 306 Access Never) extension. ``FEAT_PAN`` adds a bit to PSTATE, generating a 307 permission fault for any privileged data access from EL1/EL2 to virtual 308 memory address, accessible at EL0, provided (HCR_EL2.E2H=1). It is a 309 mandatory architectural feature and is enabled from v8.1 and upwards. This 310 flag can take values 0 to 2, to align with the ``FEATURE_DETECTION`` 311 mechanism. Default value is ``0``. 312 313- ``ENABLE_FEAT_RNG``: Numeric value to enable the ``FEAT_RNG`` extension. 314 ``FEAT_RNG`` is an optional feature available on Arm v8.5 onwards. This 315 flag can take the values 0 to 2, to align with the ``FEATURE_DETECTION`` 316 mechanism. Default is ``0``. 317 318- ``ENABLE_FEAT_SB``: Numeric value to enable the ``FEAT_SB`` (Speculation 319 Barrier) extension allowing access to ``sb`` instruction. ``FEAT_SB`` is an 320 optional feature and defaults to ``0`` for pre-Armv8.5 CPUs but are mandatory 321 for Armv8.5 or later CPUs. This flag can take values 0 to 2, to align with 322 ``FEATURE_DETECTION`` mechanism. It is enabled from v8.5 and upwards and if 323 needed could be overidden from platforms explicitly. Default value is ``0``. 324 325- ``ENABLE_FEAT_SEL2``: Numeric value to enable the ``FEAT_SEL2`` (Secure EL2) 326 extension. ``FEAT_SEL2`` is a mandatory feature available on Arm v8.4. 327 This flag can take values 0 to 2, to align with the ``FEATURE_DETECTION`` 328 mechanism. Default is ``0``. 329 330- ``ENABLE_FEAT_VHE``: Numeric value to enable the ``FEAT_VHE`` (Virtualization 331 Host Extensions) extension. It allows access to CONTEXTIDR_EL2 register 332 during EL2 context save/restore operations.``FEAT_VHE`` is a mandatory 333 architectural feature and is enabled from v8.1 and upwards. It can take 334 values 0 to 2, to align with the ``FEATURE_DETECTION`` mechanism. 335 Default value is ``0``. 336 337- ``ENABLE_LTO``: Boolean option to enable Link Time Optimization (LTO) 338 support in GCC for TF-A. This option is currently only supported for 339 AArch64. Default is 0. 340 341- ``ENABLE_MPAM_FOR_LOWER_ELS``: Numeric value to enable lower ELs to use MPAM 342 feature. MPAM is an optional Armv8.4 extension that enables various memory 343 system components and resources to define partitions; software running at 344 various ELs can assign themselves to desired partition to control their 345 performance aspects. 346 347 This flag can take values 0 to 2, to align with the ``FEATURE_DETECTION`` 348 mechanism. When this option is set to ``1`` or ``2``, EL3 allows lower ELs to 349 access their own MPAM registers without trapping into EL3. This option 350 doesn't make use of partitioning in EL3, however. Platform initialisation 351 code should configure and use partitions in EL3 as required. This option 352 defaults to ``0``. 353 354- ``ENABLE_MPMM``: Boolean option to enable support for the Maximum Power 355 Mitigation Mechanism supported by certain Arm cores, which allows the SoC 356 firmware to detect and limit high activity events to assist in SoC processor 357 power domain dynamic power budgeting and limit the triggering of whole-rail 358 (i.e. clock chopping) responses to overcurrent conditions. Defaults to ``0``. 359 360- ``ENABLE_MPMM_FCONF``: Enables configuration of MPMM through FCONF, which 361 allows platforms with cores supporting MPMM to describe them via the 362 ``HW_CONFIG`` device tree blob. Default is 0. 363 364- ``ENABLE_PIE``: Boolean option to enable Position Independent Executable(PIE) 365 support within generic code in TF-A. This option is currently only supported 366 in BL2_AT_EL3, BL31, and BL32 (TSP) for AARCH64 binaries, and in BL32 367 (SP_min) for AARCH32. Default is 0. 368 369- ``ENABLE_PMF``: Boolean option to enable support for optional Performance 370 Measurement Framework(PMF). Default is 0. 371 372- ``ENABLE_PSCI_STAT``: Boolean option to enable support for optional PSCI 373 functions ``PSCI_STAT_RESIDENCY`` and ``PSCI_STAT_COUNT``. Default is 0. 374 In the absence of an alternate stat collection backend, ``ENABLE_PMF`` must 375 be enabled. If ``ENABLE_PMF`` is set, the residency statistics are tracked in 376 software. 377 378- ``ENABLE_RME``: Numeric value to enable support for the ARMv9 Realm 379 Management Extension. This flag can take the values 0 to 2, to align with 380 the ``FEATURE_DETECTION`` mechanism. Default value is 0. This is currently 381 an experimental feature. 382 383- ``ENABLE_RUNTIME_INSTRUMENTATION``: Boolean option to enable runtime 384 instrumentation which injects timestamp collection points into TF-A to 385 allow runtime performance to be measured. Currently, only PSCI is 386 instrumented. Enabling this option enables the ``ENABLE_PMF`` build option 387 as well. Default is 0. 388 389- ``ENABLE_SME_FOR_NS``: Boolean option to enable Scalable Matrix Extension 390 (SME), SVE, and FPU/SIMD for the non-secure world only. These features share 391 registers so are enabled together. Using this option without 392 ENABLE_SME_FOR_SWD=1 will cause SME, SVE, and FPU/SIMD instructions in secure 393 world to trap to EL3. SME is an optional architectural feature for AArch64 394 and TF-A support is experimental. At this time, this build option cannot be 395 used on systems that have SPD=spmd/SPM_MM or ENABLE_RME, and attempting to 396 build with these options will fail. Default is 0. 397 398- ``ENABLE_SME_FOR_SWD``: Boolean option to enable the Scalable Matrix 399 Extension for secure world use along with SVE and FPU/SIMD, ENABLE_SME_FOR_NS 400 must also be set to use this. If enabling this, the secure world MUST 401 handle context switching for SME, SVE, and FPU/SIMD registers to ensure that 402 no data is leaked to non-secure world. This is experimental. Default is 0. 403 404- ``ENABLE_SPE_FOR_LOWER_ELS`` : Boolean option to enable Statistical Profiling 405 extensions. This is an optional architectural feature for AArch64. 406 The default is 1 but is automatically disabled when the target architecture 407 is AArch32. 408 409- ``ENABLE_SVE_FOR_NS``: Boolean option to enable Scalable Vector Extension 410 (SVE) for the Non-secure world only. SVE is an optional architectural feature 411 for AArch64. Note that when SVE is enabled for the Non-secure world, access 412 to SIMD and floating-point functionality from the Secure world is disabled by 413 default and controlled with ENABLE_SVE_FOR_SWD. 414 This is to avoid corruption of the Non-secure world data in the Z-registers 415 which are aliased by the SIMD and FP registers. The build option is not 416 compatible with the ``CTX_INCLUDE_FPREGS`` build option, and will raise an 417 assert on platforms where SVE is implemented and ``ENABLE_SVE_FOR_NS`` set to 418 1. The default is 1 but is automatically disabled when ENABLE_SME_FOR_NS=1 419 since SME encompasses SVE. At this time, this build option cannot be used on 420 systems that have SPM_MM enabled. 421 422- ``ENABLE_SVE_FOR_SWD``: Boolean option to enable SVE for the Secure world. 423 SVE is an optional architectural feature for AArch64. Note that this option 424 requires ENABLE_SVE_FOR_NS to be enabled. The default is 0 and it 425 is automatically disabled when the target architecture is AArch32. 426 427- ``ENABLE_STACK_PROTECTOR``: String option to enable the stack protection 428 checks in GCC. Allowed values are "all", "strong", "default" and "none". The 429 default value is set to "none". "strong" is the recommended stack protection 430 level if this feature is desired. "none" disables the stack protection. For 431 all values other than "none", the ``plat_get_stack_protector_canary()`` 432 platform hook needs to be implemented. The value is passed as the last 433 component of the option ``-fstack-protector-$ENABLE_STACK_PROTECTOR``. 434 435- ``ENCRYPT_BL31``: Binary flag to enable encryption of BL31 firmware. This 436 flag depends on ``DECRYPTION_SUPPORT`` build flag. 437 438- ``ENCRYPT_BL32``: Binary flag to enable encryption of Secure BL32 payload. 439 This flag depends on ``DECRYPTION_SUPPORT`` build flag. 440 441- ``ENC_KEY``: A 32-byte (256-bit) symmetric key in hex string format. It could 442 either be SSK or BSSK depending on ``FW_ENC_STATUS`` flag. This value depends 443 on ``DECRYPTION_SUPPORT`` build flag. 444 445- ``ENC_NONCE``: A 12-byte (96-bit) encryption nonce or Initialization Vector 446 (IV) in hex string format. This value depends on ``DECRYPTION_SUPPORT`` 447 build flag. 448 449- ``ERROR_DEPRECATED``: This option decides whether to treat the usage of 450 deprecated platform APIs, helper functions or drivers within Trusted 451 Firmware as error. It can take the value 1 (flag the use of deprecated 452 APIs as error) or 0. The default is 0. 453 454- ``EL3_EXCEPTION_HANDLING``: When set to ``1``, enable handling of exceptions 455 targeted at EL3. When set ``0`` (default), no exceptions are expected or 456 handled at EL3, and a panic will result. This is supported only for AArch64 457 builds. 458 459- ``EVENT_LOG_LEVEL``: Chooses the log level to use for Measured Boot when 460 ``MEASURED_BOOT`` is enabled. For a list of valid values, see ``LOG_LEVEL``. 461 Default value is 40 (LOG_LEVEL_INFO). 462 463- ``FAULT_INJECTION_SUPPORT``: ARMv8.4 extensions introduced support for fault 464 injection from lower ELs, and this build option enables lower ELs to use 465 Error Records accessed via System Registers to inject faults. This is 466 applicable only to AArch64 builds. 467 468 This feature is intended for testing purposes only, and is advisable to keep 469 disabled for production images. 470 471- ``FEATURE_DETECTION``: Boolean option to enable the architectural features 472 detection mechanism. It detects whether the Architectural features enabled 473 through feature specific build flags are supported by the PE or not by 474 validating them either at boot phase or at runtime based on the value 475 possessed by the feature flag (0 to 2) and report error messages at an early 476 stage. 477 478 This prevents and benefits us from EL3 runtime exceptions during context save 479 and restore routines guarded by these build flags. Henceforth validating them 480 before their usage provides more control on the actions taken under them. 481 482 The mechanism permits the build flags to take values 0, 1 or 2 and 483 evaluates them accordingly. 484 485 Lets consider ``ENABLE_FEAT_HCX``, build flag for ``FEAT_HCX`` as an example: 486 487 :: 488 489 ENABLE_FEAT_HCX = 0: Feature disabled statically at compile time. 490 ENABLE_FEAT_HCX = 1: Feature Enabled and the flag is validated at boottime. 491 ENABLE_FEAT_HCX = 2: Feature Enabled and the flag is validated at runtime. 492 493 In the above example, if the feature build flag, ``ENABLE_FEAT_HCX`` set to 494 0, feature is disabled statically during compilation. If it is defined as 1, 495 feature is validated, wherein FEAT_HCX is detected at boot time. In case not 496 implemented by the PE, a hard panic is generated. Finally, if the flag is set 497 to 2, feature is validated at runtime. 498 499 Note that the entire implementation is divided into two phases, wherein as 500 as part of phase-1 we are supporting the values 0,1. Value 2 is currently not 501 supported and is planned to be handled explicilty in phase-2 implementation. 502 503 FEATURE_DETECTION macro is disabled by default, and is currently an 504 experimental procedure. Platforms can explicitly make use of this by 505 mechanism, by enabling it to validate whether they have set their build flags 506 properly at an early phase. 507 508- ``FIP_NAME``: This is an optional build option which specifies the FIP 509 filename for the ``fip`` target. Default is ``fip.bin``. 510 511- ``FWU_FIP_NAME``: This is an optional build option which specifies the FWU 512 FIP filename for the ``fwu_fip`` target. Default is ``fwu_fip.bin``. 513 514- ``FW_ENC_STATUS``: Top level firmware's encryption numeric flag, values: 515 516 :: 517 518 0: Encryption is done with Secret Symmetric Key (SSK) which is common 519 for a class of devices. 520 1: Encryption is done with Binding Secret Symmetric Key (BSSK) which is 521 unique per device. 522 523 This flag depends on ``DECRYPTION_SUPPORT`` build flag. 524 525- ``GENERATE_COT``: Boolean flag used to build and execute the ``cert_create`` 526 tool to create certificates as per the Chain of Trust described in 527 :ref:`Trusted Board Boot`. The build system then calls ``fiptool`` to 528 include the certificates in the FIP and FWU_FIP. Default value is '0'. 529 530 Specify both ``TRUSTED_BOARD_BOOT=1`` and ``GENERATE_COT=1`` to include support 531 for the Trusted Board Boot feature in the BL1 and BL2 images, to generate 532 the corresponding certificates, and to include those certificates in the 533 FIP and FWU_FIP. 534 535 Note that if ``TRUSTED_BOARD_BOOT=0`` and ``GENERATE_COT=1``, the BL1 and BL2 536 images will not include support for Trusted Board Boot. The FIP will still 537 include the corresponding certificates. This FIP can be used to verify the 538 Chain of Trust on the host machine through other mechanisms. 539 540 Note that if ``TRUSTED_BOARD_BOOT=1`` and ``GENERATE_COT=0``, the BL1 and BL2 541 images will include support for Trusted Board Boot, but the FIP and FWU_FIP 542 will not include the corresponding certificates, causing a boot failure. 543 544- ``GICV2_G0_FOR_EL3``: Unlike GICv3, the GICv2 architecture doesn't have 545 inherent support for specific EL3 type interrupts. Setting this build option 546 to ``1`` assumes GICv2 *Group 0* interrupts are expected to target EL3, both 547 by :ref:`platform abstraction layer<platform Interrupt Controller API>` and 548 :ref:`Interrupt Management Framework<Interrupt Management Framework>`. 549 This allows GICv2 platforms to enable features requiring EL3 interrupt type. 550 This also means that all GICv2 Group 0 interrupts are delivered to EL3, and 551 the Secure Payload interrupts needs to be synchronously handed over to Secure 552 EL1 for handling. The default value of this option is ``0``, which means the 553 Group 0 interrupts are assumed to be handled by Secure EL1. 554 555- ``HANDLE_EA_EL3_FIRST``: When set to ``1``, External Aborts and SError 556 Interrupts will be always trapped in EL3 i.e. in BL31 at runtime. When set to 557 ``0`` (default), these exceptions will be trapped in the current exception 558 level (or in EL1 if the current exception level is EL0). 559 560- ``HW_ASSISTED_COHERENCY``: On most Arm systems to-date, platform-specific 561 software operations are required for CPUs to enter and exit coherency. 562 However, newer systems exist where CPUs' entry to and exit from coherency 563 is managed in hardware. Such systems require software to only initiate these 564 operations, and the rest is managed in hardware, minimizing active software 565 management. In such systems, this boolean option enables TF-A to carry out 566 build and run-time optimizations during boot and power management operations. 567 This option defaults to 0 and if it is enabled, then it implies 568 ``WARMBOOT_ENABLE_DCACHE_EARLY`` is also enabled. 569 570 If this flag is disabled while the platform which TF-A is compiled for 571 includes cores that manage coherency in hardware, then a compilation error is 572 generated. This is based on the fact that a system cannot have, at the same 573 time, cores that manage coherency in hardware and cores that don't. In other 574 words, a platform cannot have, at the same time, cores that require 575 ``HW_ASSISTED_COHERENCY=1`` and cores that require 576 ``HW_ASSISTED_COHERENCY=0``. 577 578 Note that, when ``HW_ASSISTED_COHERENCY`` is enabled, version 2 of 579 translation library (xlat tables v2) must be used; version 1 of translation 580 library is not supported. 581 582- ``INVERTED_MEMMAP``: memmap tool print by default lower addresses at the 583 bottom, higher addresses at the top. This build flag can be set to '1' to 584 invert this behavior. Lower addresses will be printed at the top and higher 585 addresses at the bottom. 586 587- ``JUNO_AARCH32_EL3_RUNTIME``: This build flag enables you to execute EL3 588 runtime software in AArch32 mode, which is required to run AArch32 on Juno. 589 By default this flag is set to '0'. Enabling this flag builds BL1 and BL2 in 590 AArch64 and facilitates the loading of ``SP_MIN`` and BL33 as AArch32 executable 591 images. 592 593- ``KEY_ALG``: This build flag enables the user to select the algorithm to be 594 used for generating the PKCS keys and subsequent signing of the certificate. 595 It accepts 3 values: ``rsa``, ``rsa_1_5`` and ``ecdsa``. The option 596 ``rsa_1_5`` is the legacy PKCS#1 RSA 1.5 algorithm which is not TBBR 597 compliant and is retained only for compatibility. The default value of this 598 flag is ``rsa`` which is the TBBR compliant PKCS#1 RSA 2.1 scheme. 599 600- ``KEY_SIZE``: This build flag enables the user to select the key size for 601 the algorithm specified by ``KEY_ALG``. The valid values for ``KEY_SIZE`` 602 depend on the chosen algorithm and the cryptographic module. 603 604 +-----------+------------------------------------+ 605 | KEY_ALG | Possible key sizes | 606 +===========+====================================+ 607 | rsa | 1024 , 2048 (default), 3072, 4096* | 608 +-----------+------------------------------------+ 609 | ecdsa | unavailable | 610 +-----------+------------------------------------+ 611 612 * Only 2048 bits size is available with CryptoCell 712 SBROM release 1. 613 Only 3072 bits size is available with CryptoCell 712 SBROM release 2. 614 615- ``HASH_ALG``: This build flag enables the user to select the secure hash 616 algorithm. It accepts 3 values: ``sha256``, ``sha384`` and ``sha512``. 617 The default value of this flag is ``sha256``. 618 619- ``LDFLAGS``: Extra user options appended to the linkers' command line in 620 addition to the one set by the build system. 621 622- ``LOG_LEVEL``: Chooses the log level, which controls the amount of console log 623 output compiled into the build. This should be one of the following: 624 625 :: 626 627 0 (LOG_LEVEL_NONE) 628 10 (LOG_LEVEL_ERROR) 629 20 (LOG_LEVEL_NOTICE) 630 30 (LOG_LEVEL_WARNING) 631 40 (LOG_LEVEL_INFO) 632 50 (LOG_LEVEL_VERBOSE) 633 634 All log output up to and including the selected log level is compiled into 635 the build. The default value is 40 in debug builds and 20 in release builds. 636 637- ``MEASURED_BOOT``: Boolean flag to include support for the Measured Boot 638 feature. This flag can be enabled with ``TRUSTED_BOARD_BOOT`` in order to 639 provide trust that the code taking the measurements and recording them has 640 not been tampered with. 641 642 This option defaults to 0. 643 644- ``NON_TRUSTED_WORLD_KEY``: This option is used when ``GENERATE_COT=1``. It 645 specifies the file that contains the Non-Trusted World private key in PEM 646 format. If ``SAVE_KEYS=1``, this file name will be used to save the key. 647 648- ``NS_BL2U``: Path to NS_BL2U image in the host file system. This image is 649 optional. It is only needed if the platform makefile specifies that it 650 is required in order to build the ``fwu_fip`` target. 651 652- ``NS_TIMER_SWITCH``: Enable save and restore for non-secure timer register 653 contents upon world switch. It can take either 0 (don't save and restore) or 654 1 (do save and restore). 0 is the default. An SPD may set this to 1 if it 655 wants the timer registers to be saved and restored. 656 657- ``OVERRIDE_LIBC``: This option allows platforms to override the default libc 658 for the BL image. It can be either 0 (include) or 1 (remove). The default 659 value is 0. 660 661- ``PL011_GENERIC_UART``: Boolean option to indicate the PL011 driver that 662 the underlying hardware is not a full PL011 UART but a minimally compliant 663 generic UART, which is a subset of the PL011. The driver will not access 664 any register that is not part of the SBSA generic UART specification. 665 Default value is 0 (a full PL011 compliant UART is present). 666 667- ``PLAT``: Choose a platform to build TF-A for. The chosen platform name 668 must be subdirectory of any depth under ``plat/``, and must contain a 669 platform makefile named ``platform.mk``. For example, to build TF-A for the 670 Arm Juno board, select PLAT=juno. 671 672- ``PRELOADED_BL33_BASE``: This option enables booting a preloaded BL33 image 673 instead of the normal boot flow. When defined, it must specify the entry 674 point address for the preloaded BL33 image. This option is incompatible with 675 ``EL3_PAYLOAD_BASE``. If both are defined, ``EL3_PAYLOAD_BASE`` has priority 676 over ``PRELOADED_BL33_BASE``. 677 678- ``PROGRAMMABLE_RESET_ADDRESS``: This option indicates whether the reset 679 vector address can be programmed or is fixed on the platform. It can take 680 either 0 (fixed) or 1 (programmable). Default is 0. If the platform has a 681 programmable reset address, it is expected that a CPU will start executing 682 code directly at the right address, both on a cold and warm reset. In this 683 case, there is no need to identify the entrypoint on boot and the boot path 684 can be optimised. The ``plat_get_my_entrypoint()`` platform porting interface 685 does not need to be implemented in this case. 686 687- ``PSCI_EXTENDED_STATE_ID``: As per PSCI1.0 Specification, there are 2 formats 688 possible for the PSCI power-state parameter: original and extended State-ID 689 formats. This flag if set to 1, configures the generic PSCI layer to use the 690 extended format. The default value of this flag is 0, which means by default 691 the original power-state format is used by the PSCI implementation. This flag 692 should be specified by the platform makefile and it governs the return value 693 of PSCI_FEATURES API for CPU_SUSPEND smc function id. When this option is 694 enabled on Arm platforms, the option ``ARM_RECOM_STATE_ID_ENC`` needs to be 695 set to 1 as well. 696 697- ``RAS_EXTENSION``: Numeric value to enable Armv8.2 RAS features. RAS features 698 are an optional extension for pre-Armv8.2 CPUs, but are mandatory for Armv8.2 699 or later CPUs. This flag can take the values 0 to 2, to align with the 700 ``FEATURE_DETECTION`` mechanism. 701 702 When ``RAS_EXTENSION`` is set to ``1``, ``HANDLE_EA_EL3_FIRST`` must also be 703 set to ``1``. 704 705 This option is disabled by default. 706 707- ``RESET_TO_BL31``: Enable BL31 entrypoint as the CPU reset vector instead 708 of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 709 entrypoint) or 1 (CPU reset to BL31 entrypoint). 710 The default value is 0. 711 712- ``RESET_TO_SP_MIN``: SP_MIN is the minimal AArch32 Secure Payload provided 713 in TF-A. This flag configures SP_MIN entrypoint as the CPU reset vector 714 instead of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1 715 entrypoint) or 1 (CPU reset to SP_MIN entrypoint). The default value is 0. 716 717- ``ROT_KEY``: This option is used when ``GENERATE_COT=1``. It specifies the 718 file that contains the ROT private key in PEM format and enforces public key 719 hash generation. If ``SAVE_KEYS=1``, this 720 file name will be used to save the key. 721 722- ``SAVE_KEYS``: This option is used when ``GENERATE_COT=1``. It tells the 723 certificate generation tool to save the keys used to establish the Chain of 724 Trust. Allowed options are '0' or '1'. Default is '0' (do not save). 725 726- ``SCP_BL2``: Path to SCP_BL2 image in the host file system. This image is optional. 727 If a SCP_BL2 image is present then this option must be passed for the ``fip`` 728 target. 729 730- ``SCP_BL2_KEY``: This option is used when ``GENERATE_COT=1``. It specifies the 731 file that contains the SCP_BL2 private key in PEM format. If ``SAVE_KEYS=1``, 732 this file name will be used to save the key. 733 734- ``SCP_BL2U``: Path to SCP_BL2U image in the host file system. This image is 735 optional. It is only needed if the platform makefile specifies that it 736 is required in order to build the ``fwu_fip`` target. 737 738- ``SDEI_SUPPORT``: Setting this to ``1`` enables support for Software 739 Delegated Exception Interface to BL31 image. This defaults to ``0``. 740 741 When set to ``1``, the build option ``EL3_EXCEPTION_HANDLING`` must also be 742 set to ``1``. 743 744- ``SEPARATE_CODE_AND_RODATA``: Whether code and read-only data should be 745 isolated on separate memory pages. This is a trade-off between security and 746 memory usage. See "Isolating code and read-only data on separate memory 747 pages" section in :ref:`Firmware Design`. This flag is disabled by default 748 and affects all BL images. 749 750- ``SEPARATE_NOBITS_REGION``: Setting this option to ``1`` allows the NOBITS 751 sections of BL31 (.bss, stacks, page tables, and coherent memory) to be 752 allocated in RAM discontiguous from the loaded firmware image. When set, the 753 platform is expected to provide definitions for ``BL31_NOBITS_BASE`` and 754 ``BL31_NOBITS_LIMIT``. When the option is ``0`` (the default), NOBITS 755 sections are placed in RAM immediately following the loaded firmware image. 756 757- ``SEPARATE_BL2_NOLOAD_REGION``: Setting this option to ``1`` allows the 758 NOLOAD sections of BL2 (.bss, stacks, page tables) to be allocated in RAM 759 discontiguous from loaded firmware images. When set, the platform need to 760 provide definitions of ``BL2_NOLOAD_START`` and ``BL2_NOLOAD_LIMIT``. This 761 flag is disabled by default and NOLOAD sections are placed in RAM immediately 762 following the loaded firmware image. 763 764- ``SMC_PCI_SUPPORT``: This option allows platforms to handle PCI configuration 765 access requests via a standard SMCCC defined in `DEN0115`_. When combined with 766 UEFI+ACPI this can provide a certain amount of OS forward compatibility 767 with newer platforms that aren't ECAM compliant. 768 769- ``SPD``: Choose a Secure Payload Dispatcher component to be built into TF-A. 770 This build option is only valid if ``ARCH=aarch64``. The value should be 771 the path to the directory containing the SPD source, relative to 772 ``services/spd/``; the directory is expected to contain a makefile called 773 ``<spd-value>.mk``. The SPM Dispatcher standard service is located in 774 services/std_svc/spmd and enabled by ``SPD=spmd``. The SPM Dispatcher 775 cannot be enabled when the ``SPM_MM`` option is enabled. 776 777- ``SPIN_ON_BL1_EXIT``: This option introduces an infinite loop in BL1. It can 778 take either 0 (no loop) or 1 (add a loop). 0 is the default. This loop stops 779 execution in BL1 just before handing over to BL31. At this point, all 780 firmware images have been loaded in memory, and the MMU and caches are 781 turned off. Refer to the "Debugging options" section for more details. 782 783- ``SPMC_AT_EL3`` : This boolean option is used jointly with the SPM 784 Dispatcher option (``SPD=spmd``). When enabled (1) it indicates the SPMC 785 component runs at the EL3 exception level. The default value is ``0`` ( 786 disabled). This configuration supports pre-Armv8.4 platforms (aka not 787 implementing the ``FEAT_SEL2`` extension). This is an experimental feature. 788 789- ``SPMD_SPM_AT_SEL2`` : This boolean option is used jointly with the SPM 790 Dispatcher option (``SPD=spmd``). When enabled (1) it indicates the SPMC 791 component runs at the S-EL2 exception level provided by the ``FEAT_SEL2`` 792 extension. This is the default when enabling the SPM Dispatcher. When 793 disabled (0) it indicates the SPMC component runs at the S-EL1 execution 794 state or at EL3 if ``SPMC_AT_EL3`` is enabled. The latter configurations 795 support pre-Armv8.4 platforms (aka not implementing the ``FEAT_SEL2`` 796 extension). 797 798- ``SPM_MM`` : Boolean option to enable the Management Mode (MM)-based Secure 799 Partition Manager (SPM) implementation. The default value is ``0`` 800 (disabled). This option cannot be enabled (``1``) when SPM Dispatcher is 801 enabled (``SPD=spmd``). 802 803- ``SP_LAYOUT_FILE``: Platform provided path to JSON file containing the 804 description of secure partitions. The build system will parse this file and 805 package all secure partition blobs into the FIP. This file is not 806 necessarily part of TF-A tree. Only available when ``SPD=spmd``. 807 808- ``SP_MIN_WITH_SECURE_FIQ``: Boolean flag to indicate the SP_MIN handles 809 secure interrupts (caught through the FIQ line). Platforms can enable 810 this directive if they need to handle such interruption. When enabled, 811 the FIQ are handled in monitor mode and non secure world is not allowed 812 to mask these events. Platforms that enable FIQ handling in SP_MIN shall 813 implement the api ``sp_min_plat_fiq_handler()``. The default value is 0. 814 815- ``TRUSTED_BOARD_BOOT``: Boolean flag to include support for the Trusted Board 816 Boot feature. When set to '1', BL1 and BL2 images include support to load 817 and verify the certificates and images in a FIP, and BL1 includes support 818 for the Firmware Update. The default value is '0'. Generation and inclusion 819 of certificates in the FIP and FWU_FIP depends upon the value of the 820 ``GENERATE_COT`` option. 821 822 .. warning:: 823 This option depends on ``CREATE_KEYS`` to be enabled. If the keys 824 already exist in disk, they will be overwritten without further notice. 825 826- ``TRUSTED_WORLD_KEY``: This option is used when ``GENERATE_COT=1``. It 827 specifies the file that contains the Trusted World private key in PEM 828 format. If ``SAVE_KEYS=1``, this file name will be used to save the key. 829 830- ``TSP_INIT_ASYNC``: Choose BL32 initialization method as asynchronous or 831 synchronous, (see "Initializing a BL32 Image" section in 832 :ref:`Firmware Design`). It can take the value 0 (BL32 is initialized using 833 synchronous method) or 1 (BL32 is initialized using asynchronous method). 834 Default is 0. 835 836- ``TSP_NS_INTR_ASYNC_PREEMPT``: A non zero value enables the interrupt 837 routing model which routes non-secure interrupts asynchronously from TSP 838 to EL3 causing immediate preemption of TSP. The EL3 is responsible 839 for saving and restoring the TSP context in this routing model. The 840 default routing model (when the value is 0) is to route non-secure 841 interrupts to TSP allowing it to save its context and hand over 842 synchronously to EL3 via an SMC. 843 844 .. note:: 845 When ``EL3_EXCEPTION_HANDLING`` is ``1``, ``TSP_NS_INTR_ASYNC_PREEMPT`` 846 must also be set to ``1``. 847 848- ``USE_ARM_LINK``: This flag determines whether to enable support for ARM 849 linker. When the ``LINKER`` build variable points to the armlink linker, 850 this flag is enabled automatically. To enable support for armlink, platforms 851 will have to provide a scatter file for the BL image. Currently, Tegra 852 platforms use the armlink support to compile BL3-1 images. 853 854- ``USE_COHERENT_MEM``: This flag determines whether to include the coherent 855 memory region in the BL memory map or not (see "Use of Coherent memory in 856 TF-A" section in :ref:`Firmware Design`). It can take the value 1 857 (Coherent memory region is included) or 0 (Coherent memory region is 858 excluded). Default is 1. 859 860- ``USE_DEBUGFS``: When set to 1 this option activates an EXPERIMENTAL feature 861 exposing a virtual filesystem interface through BL31 as a SiP SMC function. 862 Default is 0. 863 864- ``ARM_IO_IN_DTB``: This flag determines whether to use IO based on the 865 firmware configuration framework. This will move the io_policies into a 866 configuration device tree, instead of static structure in the code base. 867 868- ``COT_DESC_IN_DTB``: This flag determines whether to create COT descriptors 869 at runtime using fconf. If this flag is enabled, COT descriptors are 870 statically captured in tb_fw_config file in the form of device tree nodes 871 and properties. Currently, COT descriptors used by BL2 are moved to the 872 device tree and COT descriptors used by BL1 are retained in the code 873 base statically. 874 875- ``SDEI_IN_FCONF``: This flag determines whether to configure SDEI setup in 876 runtime using firmware configuration framework. The platform specific SDEI 877 shared and private events configuration is retrieved from device tree rather 878 than static C structures at compile time. This is only supported if 879 SDEI_SUPPORT build flag is enabled. 880 881- ``SEC_INT_DESC_IN_FCONF``: This flag determines whether to configure Group 0 882 and Group1 secure interrupts using the firmware configuration framework. The 883 platform specific secure interrupt property descriptor is retrieved from 884 device tree in runtime rather than depending on static C structure at compile 885 time. 886 887- ``USE_ROMLIB``: This flag determines whether library at ROM will be used. 888 This feature creates a library of functions to be placed in ROM and thus 889 reduces SRAM usage. Refer to :ref:`Library at ROM` for further details. Default 890 is 0. 891 892- ``V``: Verbose build. If assigned anything other than 0, the build commands 893 are printed. Default is 0. 894 895- ``VERSION_STRING``: String used in the log output for each TF-A image. 896 Defaults to a string formed by concatenating the version number, build type 897 and build string. 898 899- ``W``: Warning level. Some compiler warning options of interest have been 900 regrouped and put in the root Makefile. This flag can take the values 0 to 3, 901 each level enabling more warning options. Default is 0. 902 903- ``WARMBOOT_ENABLE_DCACHE_EARLY`` : Boolean option to enable D-cache early on 904 the CPU after warm boot. This is applicable for platforms which do not 905 require interconnect programming to enable cache coherency (eg: single 906 cluster platforms). If this option is enabled, then warm boot path 907 enables D-caches immediately after enabling MMU. This option defaults to 0. 908 909- ``SUPPORT_STACK_MEMTAG``: This flag determines whether to enable memory 910 tagging for stack or not. It accepts 2 values: ``yes`` and ``no``. The 911 default value of this flag is ``no``. Note this option must be enabled only 912 for ARM architecture greater than Armv8.5-A. 913 914- ``ERRATA_SPECULATIVE_AT``: This flag determines whether to enable ``AT`` 915 speculative errata workaround or not. It accepts 2 values: ``1`` and ``0``. 916 The default value of this flag is ``0``. 917 918 ``AT`` speculative errata workaround disables stage1 page table walk for 919 lower ELs (EL1 and EL0) in EL3 so that ``AT`` speculative fetch at any point 920 produces either the correct result or failure without TLB allocation. 921 922 This boolean option enables errata for all below CPUs. 923 924 +---------+--------------+-------------------------+ 925 | Errata | CPU | Workaround Define | 926 +=========+==============+=========================+ 927 | 1165522 | Cortex-A76 | ``ERRATA_A76_1165522`` | 928 +---------+--------------+-------------------------+ 929 | 1319367 | Cortex-A72 | ``ERRATA_A72_1319367`` | 930 +---------+--------------+-------------------------+ 931 | 1319537 | Cortex-A57 | ``ERRATA_A57_1319537`` | 932 +---------+--------------+-------------------------+ 933 | 1530923 | Cortex-A55 | ``ERRATA_A55_1530923`` | 934 +---------+--------------+-------------------------+ 935 | 1530924 | Cortex-A53 | ``ERRATA_A53_1530924`` | 936 +---------+--------------+-------------------------+ 937 938 .. note:: 939 This option is enabled by build only if platform sets any of above defines 940 mentioned in ’Workaround Define' column in the table. 941 If this option is enabled for the EL3 software then EL2 software also must 942 implement this workaround due to the behaviour of the errata mentioned 943 in new SDEN document which will get published soon. 944 945- ``RAS_TRAP_LOWER_EL_ERR_ACCESS``: This flag enables/disables the SCR_EL3.TERR 946 bit, to trap access to the RAS ERR and RAS ERX registers from lower ELs. 947 This flag is disabled by default. 948 949- ``OPENSSL_DIR``: This flag is used to provide the installed openssl directory 950 path on the host machine which is used to build certificate generation and 951 firmware encryption tool. 952 953- ``USE_SP804_TIMER``: Use the SP804 timer instead of the Generic Timer for 954 functions that wait for an arbitrary time length (udelay and mdelay). The 955 default value is 0. 956 957- ``ENABLE_TRBE_FOR_NS``: This flag is used to enable access of trace buffer 958 control registers from NS ELs, NS-EL2 or NS-EL1(when NS-EL2 is implemented 959 but unused) when FEAT_TRBE is implemented. TRBE is an optional architectural 960 feature for AArch64. The default is 0 and it is automatically disabled when 961 the target architecture is AArch32. 962 963- ``ENABLE_SYS_REG_TRACE_FOR_NS``: Boolean option to enable trace system 964 registers access from NS ELs, NS-EL2 or NS-EL1 (when NS-EL2 is implemented 965 but unused). This feature is available if trace unit such as ETMv4.x, and 966 ETE(extending ETM feature) is implemented. This flag is disabled by default. 967 968- ``ENABLE_TRF_FOR_NS``: Numeric value to enable trace filter control registers 969 access from NS ELs, NS-EL2 or NS-EL1 (when NS-EL2 is implemented but unused), 970 if FEAT_TRF is implemented. This flag can take the values 0 to 2, to align 971 with the ``FEATURE_DETECTION`` mechanism. This flag is disabled by default. 972 973GICv3 driver options 974-------------------- 975 976GICv3 driver files are included using directive: 977 978``include drivers/arm/gic/v3/gicv3.mk`` 979 980The driver can be configured with the following options set in the platform 981makefile: 982 983- ``GICV3_SUPPORT_GIC600``: Add support for the GIC-600 variants of GICv3. 984 Enabling this option will add runtime detection support for the 985 GIC-600, so is safe to select even for a GIC500 implementation. 986 This option defaults to 0. 987 988- ``GICV3_SUPPORT_GIC600AE_FMU``: Add support for the Fault Management Unit 989 for GIC-600 AE. Enabling this option will introduce support to initialize 990 the FMU. Platforms should call the init function during boot to enable the 991 FMU and its safety mechanisms. This option defaults to 0. 992 993- ``GICV3_IMPL_GIC600_MULTICHIP``: Selects GIC-600 variant with multichip 994 functionality. This option defaults to 0 995 996- ``GICV3_OVERRIDE_DISTIF_PWR_OPS``: Allows override of default implementation 997 of ``arm_gicv3_distif_pre_save`` and ``arm_gicv3_distif_post_restore`` 998 functions. This is required for FVP platform which need to simulate GIC save 999 and restore during SYSTEM_SUSPEND without powering down GIC. Default is 0. 1000 1001- ``GIC_ENABLE_V4_EXTN`` : Enables GICv4 related changes in GICv3 driver. 1002 This option defaults to 0. 1003 1004- ``GIC_EXT_INTID``: When set to ``1``, GICv3 driver will support extended 1005 PPI (1056-1119) and SPI (4096-5119) range. This option defaults to 0. 1006 1007Debugging options 1008----------------- 1009 1010To compile a debug version and make the build more verbose use 1011 1012.. code:: shell 1013 1014 make PLAT=<platform> DEBUG=1 V=1 all 1015 1016AArch64 GCC uses DWARF version 4 debugging symbols by default. Some tools (for 1017example DS-5) might not support this and may need an older version of DWARF 1018symbols to be emitted by GCC. This can be achieved by using the 1019``-gdwarf-<version>`` flag, with the version being set to 2 or 3. Setting the 1020version to 2 is recommended for DS-5 versions older than 5.16. 1021 1022When debugging logic problems it might also be useful to disable all compiler 1023optimizations by using ``-O0``. 1024 1025.. warning:: 1026 Using ``-O0`` could cause output images to be larger and base addresses 1027 might need to be recalculated (see the **Memory layout on Arm development 1028 platforms** section in the :ref:`Firmware Design`). 1029 1030Extra debug options can be passed to the build system by setting ``CFLAGS`` or 1031``LDFLAGS``: 1032 1033.. code:: shell 1034 1035 CFLAGS='-O0 -gdwarf-2' \ 1036 make PLAT=<platform> DEBUG=1 V=1 all 1037 1038Note that using ``-Wl,`` style compilation driver options in ``CFLAGS`` will be 1039ignored as the linker is called directly. 1040 1041It is also possible to introduce an infinite loop to help in debugging the 1042post-BL2 phase of TF-A. This can be done by rebuilding BL1 with the 1043``SPIN_ON_BL1_EXIT=1`` build flag. Refer to the :ref:`build_options_common` 1044section. In this case, the developer may take control of the target using a 1045debugger when indicated by the console output. When using DS-5, the following 1046commands can be used: 1047 1048:: 1049 1050 # Stop target execution 1051 interrupt 1052 1053 # 1054 # Prepare your debugging environment, e.g. set breakpoints 1055 # 1056 1057 # Jump over the debug loop 1058 set var $AARCH64::$Core::$PC = $AARCH64::$Core::$PC + 4 1059 1060 # Resume execution 1061 continue 1062 1063Firmware update options 1064----------------------- 1065 1066- ``NR_OF_FW_BANKS``: Define the number of firmware banks. This flag is used 1067 in defining the firmware update metadata structure. This flag is by default 1068 set to '2'. 1069 1070- ``NR_OF_IMAGES_IN_FW_BANK``: Define the number of firmware images in each 1071 firmware bank. Each firmware bank must have the same number of images as per 1072 the `PSA FW update specification`_. 1073 This flag is used in defining the firmware update metadata structure. This 1074 flag is by default set to '1'. 1075 1076- ``PSA_FWU_SUPPORT``: Enable the firmware update mechanism as per the 1077 `PSA FW update specification`_. The default value is 0, and this is an 1078 experimental feature. 1079 PSA firmware update implementation has some limitations, such as BL2 is 1080 not part of the protocol-updatable images, if BL2 needs to be updated, then 1081 it should be done through another platform-defined mechanism, and it assumes 1082 that the platform's hardware supports CRC32 instructions. 1083 1084-------------- 1085 1086*Copyright (c) 2019-2022, Arm Limited. All rights reserved.* 1087 1088.. _DEN0115: https://developer.arm.com/docs/den0115/latest 1089.. _PSA FW update specification: https://developer.arm.com/documentation/den0118/a/ 1090