1/* 2 * Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions are met: 6 * 7 * Redistributions of source code must retain the above copyright notice, this 8 * list of conditions and the following disclaimer. 9 * 10 * Redistributions in binary form must reproduce the above copyright notice, 11 * this list of conditions and the following disclaimer in the documentation 12 * and/or other materials provided with the distribution. 13 * 14 * Neither the name of ARM nor the names of its contributors may be used 15 * to endorse or promote products derived from this software without specific 16 * prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 22 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 * POSSIBILITY OF SUCH DAMAGE. 29 */ 30 31#include <arch.h> 32#include <asm_macros.S> 33#include <tsp.h> 34#include <xlat_tables.h> 35#include "../tsp_private.h" 36 37 38 .globl tsp_entrypoint 39 .globl tsp_vector_table 40 41 42 43 /* --------------------------------------------- 44 * Populate the params in x0-x7 from the pointer 45 * to the smc args structure in x0. 46 * --------------------------------------------- 47 */ 48 .macro restore_args_call_smc 49 ldp x6, x7, [x0, #TSP_ARG6] 50 ldp x4, x5, [x0, #TSP_ARG4] 51 ldp x2, x3, [x0, #TSP_ARG2] 52 ldp x0, x1, [x0, #TSP_ARG0] 53 smc #0 54 .endm 55 56 .macro save_eret_context reg1 reg2 57 mrs \reg1, elr_el1 58 mrs \reg2, spsr_el1 59 stp \reg1, \reg2, [sp, #-0x10]! 60 stp x30, x18, [sp, #-0x10]! 61 .endm 62 63 .macro restore_eret_context reg1 reg2 64 ldp x30, x18, [sp], #0x10 65 ldp \reg1, \reg2, [sp], #0x10 66 msr elr_el1, \reg1 67 msr spsr_el1, \reg2 68 .endm 69 70 .section .text, "ax" 71 .align 3 72 73func tsp_entrypoint 74 75 /* --------------------------------------------- 76 * Set the exception vector to something sane. 77 * --------------------------------------------- 78 */ 79 adr x0, tsp_exceptions 80 msr vbar_el1, x0 81 isb 82 83 /* --------------------------------------------- 84 * Enable the SError interrupt now that the 85 * exception vectors have been setup. 86 * --------------------------------------------- 87 */ 88 msr daifclr, #DAIF_ABT_BIT 89 90 /* --------------------------------------------- 91 * Enable the instruction cache, stack pointer 92 * and data access alignment checks 93 * --------------------------------------------- 94 */ 95 mov x1, #(SCTLR_I_BIT | SCTLR_A_BIT | SCTLR_SA_BIT) 96 mrs x0, sctlr_el1 97 orr x0, x0, x1 98 msr sctlr_el1, x0 99 isb 100 101 /* --------------------------------------------- 102 * Invalidate the RW memory used by the BL32 103 * image. This includes the data and NOBITS 104 * sections. This is done to safeguard against 105 * possible corruption of this memory by dirty 106 * cache lines in a system cache as a result of 107 * use by an earlier boot loader stage. 108 * --------------------------------------------- 109 */ 110 adr x0, __RW_START__ 111 adr x1, __RW_END__ 112 sub x1, x1, x0 113 bl inv_dcache_range 114 115 /* --------------------------------------------- 116 * Zero out NOBITS sections. There are 2 of them: 117 * - the .bss section; 118 * - the coherent memory section. 119 * --------------------------------------------- 120 */ 121 ldr x0, =__BSS_START__ 122 ldr x1, =__BSS_SIZE__ 123 bl zeromem16 124 125#if USE_COHERENT_MEM 126 ldr x0, =__COHERENT_RAM_START__ 127 ldr x1, =__COHERENT_RAM_UNALIGNED_SIZE__ 128 bl zeromem16 129#endif 130 131 /* -------------------------------------------- 132 * Allocate a stack whose memory will be marked 133 * as Normal-IS-WBWA when the MMU is enabled. 134 * There is no risk of reading stale stack 135 * memory after enabling the MMU as only the 136 * primary cpu is running at the moment. 137 * -------------------------------------------- 138 */ 139 bl plat_set_my_stack 140 141 /* --------------------------------------------- 142 * Perform early platform setup & platform 143 * specific early arch. setup e.g. mmu setup 144 * --------------------------------------------- 145 */ 146 bl tsp_early_platform_setup 147 bl tsp_plat_arch_setup 148 149 /* --------------------------------------------- 150 * Jump to main function. 151 * --------------------------------------------- 152 */ 153 bl tsp_main 154 155 /* --------------------------------------------- 156 * Tell TSPD that we are done initialising 157 * --------------------------------------------- 158 */ 159 mov x1, x0 160 mov x0, #TSP_ENTRY_DONE 161 smc #0 162 163tsp_entrypoint_panic: 164 b tsp_entrypoint_panic 165endfunc tsp_entrypoint 166 167 168 /* ------------------------------------------- 169 * Table of entrypoint vectors provided to the 170 * TSPD for the various entrypoints 171 * ------------------------------------------- 172 */ 173func tsp_vector_table 174 b tsp_std_smc_entry 175 b tsp_fast_smc_entry 176 b tsp_cpu_on_entry 177 b tsp_cpu_off_entry 178 b tsp_cpu_resume_entry 179 b tsp_cpu_suspend_entry 180 b tsp_sel1_intr_entry 181 b tsp_system_off_entry 182 b tsp_system_reset_entry 183endfunc tsp_vector_table 184 185 /*--------------------------------------------- 186 * This entrypoint is used by the TSPD when this 187 * cpu is to be turned off through a CPU_OFF 188 * psci call to ask the TSP to perform any 189 * bookeeping necessary. In the current 190 * implementation, the TSPD expects the TSP to 191 * re-initialise its state so nothing is done 192 * here except for acknowledging the request. 193 * --------------------------------------------- 194 */ 195func tsp_cpu_off_entry 196 bl tsp_cpu_off_main 197 restore_args_call_smc 198endfunc tsp_cpu_off_entry 199 200 /*--------------------------------------------- 201 * This entrypoint is used by the TSPD when the 202 * system is about to be switched off (through 203 * a SYSTEM_OFF psci call) to ask the TSP to 204 * perform any necessary bookkeeping. 205 * --------------------------------------------- 206 */ 207func tsp_system_off_entry 208 bl tsp_system_off_main 209 restore_args_call_smc 210endfunc tsp_system_off_entry 211 212 /*--------------------------------------------- 213 * This entrypoint is used by the TSPD when the 214 * system is about to be reset (through a 215 * SYSTEM_RESET psci call) to ask the TSP to 216 * perform any necessary bookkeeping. 217 * --------------------------------------------- 218 */ 219func tsp_system_reset_entry 220 bl tsp_system_reset_main 221 restore_args_call_smc 222endfunc tsp_system_reset_entry 223 224 /*--------------------------------------------- 225 * This entrypoint is used by the TSPD when this 226 * cpu is turned on using a CPU_ON psci call to 227 * ask the TSP to initialise itself i.e. setup 228 * the mmu, stacks etc. Minimal architectural 229 * state will be initialised by the TSPD when 230 * this function is entered i.e. Caches and MMU 231 * will be turned off, the execution state 232 * will be aarch64 and exceptions masked. 233 * --------------------------------------------- 234 */ 235func tsp_cpu_on_entry 236 /* --------------------------------------------- 237 * Set the exception vector to something sane. 238 * --------------------------------------------- 239 */ 240 adr x0, tsp_exceptions 241 msr vbar_el1, x0 242 isb 243 244 /* Enable the SError interrupt */ 245 msr daifclr, #DAIF_ABT_BIT 246 247 /* --------------------------------------------- 248 * Enable the instruction cache, stack pointer 249 * and data access alignment checks 250 * --------------------------------------------- 251 */ 252 mov x1, #(SCTLR_I_BIT | SCTLR_A_BIT | SCTLR_SA_BIT) 253 mrs x0, sctlr_el1 254 orr x0, x0, x1 255 msr sctlr_el1, x0 256 isb 257 258 /* -------------------------------------------- 259 * Give ourselves a stack whose memory will be 260 * marked as Normal-IS-WBWA when the MMU is 261 * enabled. 262 * -------------------------------------------- 263 */ 264 bl plat_set_my_stack 265 266 /* -------------------------------------------- 267 * Enable the MMU with the DCache disabled. It 268 * is safe to use stacks allocated in normal 269 * memory as a result. All memory accesses are 270 * marked nGnRnE when the MMU is disabled. So 271 * all the stack writes will make it to memory. 272 * All memory accesses are marked Non-cacheable 273 * when the MMU is enabled but D$ is disabled. 274 * So used stack memory is guaranteed to be 275 * visible immediately after the MMU is enabled 276 * Enabling the DCache at the same time as the 277 * MMU can lead to speculatively fetched and 278 * possibly stale stack memory being read from 279 * other caches. This can lead to coherency 280 * issues. 281 * -------------------------------------------- 282 */ 283 mov x0, #DISABLE_DCACHE 284 bl bl32_plat_enable_mmu 285 286 /* --------------------------------------------- 287 * Enable the Data cache now that the MMU has 288 * been enabled. The stack has been unwound. It 289 * will be written first before being read. This 290 * will invalidate any stale cache lines resi- 291 * -dent in other caches. We assume that 292 * interconnect coherency has been enabled for 293 * this cluster by EL3 firmware. 294 * --------------------------------------------- 295 */ 296 mrs x0, sctlr_el1 297 orr x0, x0, #SCTLR_C_BIT 298 msr sctlr_el1, x0 299 isb 300 301 /* --------------------------------------------- 302 * Enter C runtime to perform any remaining 303 * book keeping 304 * --------------------------------------------- 305 */ 306 bl tsp_cpu_on_main 307 restore_args_call_smc 308 309 /* Should never reach here */ 310tsp_cpu_on_entry_panic: 311 b tsp_cpu_on_entry_panic 312endfunc tsp_cpu_on_entry 313 314 /*--------------------------------------------- 315 * This entrypoint is used by the TSPD when this 316 * cpu is to be suspended through a CPU_SUSPEND 317 * psci call to ask the TSP to perform any 318 * bookeeping necessary. In the current 319 * implementation, the TSPD saves and restores 320 * the EL1 state. 321 * --------------------------------------------- 322 */ 323func tsp_cpu_suspend_entry 324 bl tsp_cpu_suspend_main 325 restore_args_call_smc 326endfunc tsp_cpu_suspend_entry 327 328 /*------------------------------------------------- 329 * This entrypoint is used by the TSPD to pass 330 * control for `synchronously` handling a S-EL1 331 * Interrupt which was triggered while executing 332 * in normal world. 'x0' contains a magic number 333 * which indicates this. TSPD expects control to 334 * be handed back at the end of interrupt 335 * processing. This is done through an SMC. 336 * The handover agreement is: 337 * 338 * 1. PSTATE.DAIF are set upon entry. 'x1' has 339 * the ELR_EL3 from the non-secure state. 340 * 2. TSP has to preserve the callee saved 341 * general purpose registers, SP_EL1/EL0 and 342 * LR. 343 * 3. TSP has to preserve the system and vfp 344 * registers (if applicable). 345 * 4. TSP can use 'x0-x18' to enable its C 346 * runtime. 347 * 5. TSP returns to TSPD using an SMC with 348 * 'x0' = TSP_HANDLED_S_EL1_INTR 349 * ------------------------------------------------ 350 */ 351func tsp_sel1_intr_entry 352#if DEBUG 353 mov_imm x2, TSP_HANDLE_SEL1_INTR_AND_RETURN 354 cmp x0, x2 355 b.ne tsp_sel1_int_entry_panic 356#endif 357 /*------------------------------------------------- 358 * Save any previous context needed to perform 359 * an exception return from S-EL1 e.g. context 360 * from a previous Non secure Interrupt. 361 * Update statistics and handle the S-EL1 362 * interrupt before returning to the TSPD. 363 * IRQ/FIQs are not enabled since that will 364 * complicate the implementation. Execution 365 * will be transferred back to the normal world 366 * in any case. The handler can return 0 367 * if the interrupt was handled or TSP_PREEMPTED 368 * if the expected interrupt was preempted 369 * by an interrupt that should be handled in EL3 370 * e.g. Group 0 interrupt in GICv3. In both 371 * the cases switch to EL3 using SMC with id 372 * TSP_HANDLED_S_EL1_INTR. Any other return value 373 * from the handler will result in panic. 374 * ------------------------------------------------ 375 */ 376 save_eret_context x2 x3 377 bl tsp_update_sync_sel1_intr_stats 378 bl tsp_common_int_handler 379 /* Check if the S-EL1 interrupt has been handled */ 380 cbnz x0, tsp_sel1_intr_check_preemption 381 b tsp_sel1_intr_return 382tsp_sel1_intr_check_preemption: 383 /* Check if the S-EL1 interrupt has been preempted */ 384 mov_imm x1, TSP_PREEMPTED 385 cmp x0, x1 386 b.ne tsp_sel1_int_entry_panic 387tsp_sel1_intr_return: 388 mov_imm x0, TSP_HANDLED_S_EL1_INTR 389 restore_eret_context x2 x3 390 smc #0 391 392 /* Should never reach here */ 393tsp_sel1_int_entry_panic: 394 bl plat_panic_handler 395endfunc tsp_sel1_intr_entry 396 397 /*--------------------------------------------- 398 * This entrypoint is used by the TSPD when this 399 * cpu resumes execution after an earlier 400 * CPU_SUSPEND psci call to ask the TSP to 401 * restore its saved context. In the current 402 * implementation, the TSPD saves and restores 403 * EL1 state so nothing is done here apart from 404 * acknowledging the request. 405 * --------------------------------------------- 406 */ 407func tsp_cpu_resume_entry 408 bl tsp_cpu_resume_main 409 restore_args_call_smc 410 411 /* Should never reach here */ 412 bl plat_panic_handler 413endfunc tsp_cpu_resume_entry 414 415 /*--------------------------------------------- 416 * This entrypoint is used by the TSPD to ask 417 * the TSP to service a fast smc request. 418 * --------------------------------------------- 419 */ 420func tsp_fast_smc_entry 421 bl tsp_smc_handler 422 restore_args_call_smc 423 424 /* Should never reach here */ 425 bl plat_panic_handler 426endfunc tsp_fast_smc_entry 427 428 /*--------------------------------------------- 429 * This entrypoint is used by the TSPD to ask 430 * the TSP to service a std smc request. 431 * We will enable preemption during execution 432 * of tsp_smc_handler. 433 * --------------------------------------------- 434 */ 435func tsp_std_smc_entry 436 msr daifclr, #DAIF_FIQ_BIT | DAIF_IRQ_BIT 437 bl tsp_smc_handler 438 msr daifset, #DAIF_FIQ_BIT | DAIF_IRQ_BIT 439 restore_args_call_smc 440 441 /* Should never reach here */ 442 bl plat_panic_handler 443endfunc tsp_std_smc_entry 444