xref: /rk3399_ARM-atf/bl2u/bl2u.ld.S (revision 3429c77ab09b69eef4ed752c2d641ed724e72110) 
1/*
2 * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
3 *
4 * SPDX-License-Identifier: BSD-3-Clause
5 */
6
7#include <platform_def.h>
8#include <xlat_tables_defs.h>
9
10OUTPUT_FORMAT(PLATFORM_LINKER_FORMAT)
11OUTPUT_ARCH(PLATFORM_LINKER_ARCH)
12ENTRY(bl2u_entrypoint)
13
14MEMORY {
15    RAM (rwx): ORIGIN = BL2U_BASE, LENGTH = BL2U_LIMIT - BL2U_BASE
16}
17
18
19SECTIONS
20{
21    . = BL2U_BASE;
22    ASSERT(. == ALIGN(PAGE_SIZE),
23           "BL2U_BASE address is not aligned on a page boundary.")
24
25#if SEPARATE_CODE_AND_RODATA
26    .text . : {
27        __TEXT_START__ = .;
28        *bl2u_entrypoint.o(.text*)
29        *(.text*)
30        *(.vectors)
31        . = NEXT(PAGE_SIZE);
32        __TEXT_END__ = .;
33     } >RAM
34
35    .rodata . : {
36        __RODATA_START__ = .;
37        *(.rodata*)
38        . = NEXT(PAGE_SIZE);
39        __RODATA_END__ = .;
40    } >RAM
41#else
42    ro . : {
43        __RO_START__ = .;
44        *bl2u_entrypoint.o(.text*)
45        *(.text*)
46        *(.rodata*)
47
48        *(.vectors)
49        __RO_END_UNALIGNED__ = .;
50        /*
51         * Memory page(s) mapped to this section will be marked as
52         * read-only, executable.  No RW data from the next section must
53         * creep in.  Ensure the rest of the current memory page is unused.
54         */
55        . = NEXT(PAGE_SIZE);
56        __RO_END__ = .;
57    } >RAM
58#endif
59
60    /*
61     * Define a linker symbol to mark start of the RW memory area for this
62     * image.
63     */
64    __RW_START__ = . ;
65
66    /*
67     * .data must be placed at a lower address than the stacks if the stack
68     * protector is enabled. Alternatively, the .data.stack_protector_canary
69     * section can be placed independently of the main .data section.
70     */
71    .data . : {
72        __DATA_START__ = .;
73        *(.data*)
74        __DATA_END__ = .;
75    } >RAM
76
77    stacks (NOLOAD) : {
78        __STACKS_START__ = .;
79        *(tzfw_normal_stacks)
80        __STACKS_END__ = .;
81    } >RAM
82
83    /*
84     * The .bss section gets initialised to 0 at runtime.
85     * Its base address should be 16-byte aligned for better performance of the
86     * zero-initialization code.
87     */
88    .bss : ALIGN(16) {
89        __BSS_START__ = .;
90        *(SORT_BY_ALIGNMENT(.bss*))
91        *(COMMON)
92        __BSS_END__ = .;
93    } >RAM
94
95    /*
96     * The xlat_table section is for full, aligned page tables (4K).
97     * Removing them from .bss avoids forcing 4K alignment on
98     * the .bss section and eliminates the unecessary zero init
99     */
100    xlat_table (NOLOAD) : {
101        *(xlat_table)
102    } >RAM
103
104#if USE_COHERENT_MEM
105    /*
106     * The base address of the coherent memory section must be page-aligned (4K)
107     * to guarantee that the coherent data are stored on their own pages and
108     * are not mixed with normal data.  This is required to set up the correct
109     * memory attributes for the coherent data page tables.
110     */
111    coherent_ram (NOLOAD) : ALIGN(PAGE_SIZE) {
112        __COHERENT_RAM_START__ = .;
113        *(tzfw_coherent_mem)
114        __COHERENT_RAM_END_UNALIGNED__ = .;
115        /*
116         * Memory page(s) mapped to this section will be marked
117         * as device memory.  No other unexpected data must creep in.
118         * Ensure the rest of the current memory page is unused.
119         */
120        . = NEXT(PAGE_SIZE);
121        __COHERENT_RAM_END__ = .;
122    } >RAM
123#endif
124
125    /*
126     * Define a linker symbol to mark end of the RW memory area for this
127     * image.
128     */
129    __RW_END__ = .;
130    __BL2U_END__ = .;
131
132    __BSS_SIZE__ = SIZEOF(.bss);
133
134    ASSERT(. <= BL2U_LIMIT, "BL2U image has exceeded its limit.")
135}
136