xref: /rk3399_ARM-atf/bl2u/bl2u.ld.S (revision a2aedac221d36624ee1da27741b7f2a0daaa6345)

/*
 * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#include <platform_def.h>
#include <xlat_tables_defs.h>

OUTPUT_FORMAT(PLATFORM_LINKER_FORMAT)
OUTPUT_ARCH(PLATFORM_LINKER_ARCH)
ENTRY(bl2u_entrypoint)

MEMORY {
    RAM (rwx): ORIGIN = BL2U_BASE, LENGTH = BL2U_LIMIT - BL2U_BASE
}


SECTIONS
{
    . = BL2U_BASE;
    ASSERT(. == ALIGN(PAGE_SIZE),
           "BL2U_BASE address is not aligned on a page boundary.")

#if SEPARATE_CODE_AND_RODATA
    .text . : {
        __TEXT_START__ = .;
        *bl2u_entrypoint.o(.text*)
        *(.text*)
        *(.vectors)
        . = NEXT(PAGE_SIZE);
        __TEXT_END__ = .;
     } >RAM

    .rodata . : {
        __RODATA_START__ = .;
        *(.rodata*)
        . = NEXT(PAGE_SIZE);
        __RODATA_END__ = .;
    } >RAM
#else
    ro . : {
        __RO_START__ = .;
        *bl2u_entrypoint.o(.text*)
        *(.text*)
        *(.rodata*)

        *(.vectors)
        __RO_END_UNALIGNED__ = .;
        /*
         * Memory page(s) mapped to this section will be marked as
         * read-only, executable.  No RW data from the next section must
         * creep in.  Ensure the rest of the current memory page is unused.
         */
        . = NEXT(PAGE_SIZE);
        __RO_END__ = .;
    } >RAM
#endif

    /*
     * Define a linker symbol to mark start of the RW memory area for this
     * image.
     */
    __RW_START__ = . ;

    /*
     * .data must be placed at a lower address than the stacks if the stack
     * protector is enabled. Alternatively, the .data.stack_protector_canary
     * section can be placed independently of the main .data section.
     */
    .data . : {
        __DATA_START__ = .;
        *(.data*)
        __DATA_END__ = .;
    } >RAM

    stacks (NOLOAD) : {
        __STACKS_START__ = .;
        *(tzfw_normal_stacks)
        __STACKS_END__ = .;
    } >RAM

    /*
     * The .bss section gets initialised to 0 at runtime.
     * Its base address should be 16-byte aligned for better performance of the
     * zero-initialization code.
     */
    .bss : ALIGN(16) {
        __BSS_START__ = .;
        *(SORT_BY_ALIGNMENT(.bss*))
        *(COMMON)
        __BSS_END__ = .;
    } >RAM

    /*
     * The xlat_table section is for full, aligned page tables (4K).
     * Removing them from .bss avoids forcing 4K alignment on
     * the .bss section and eliminates the unecessary zero init
     */
    xlat_table (NOLOAD) : {
        *(xlat_table)
    } >RAM

#if USE_COHERENT_MEM
    /*
     * The base address of the coherent memory section must be page-aligned (4K)
     * to guarantee that the coherent data are stored on their own pages and
     * are not mixed with normal data.  This is required to set up the correct
     * memory attributes for the coherent data page tables.
     */
    coherent_ram (NOLOAD) : ALIGN(PAGE_SIZE) {
        __COHERENT_RAM_START__ = .;
        *(tzfw_coherent_mem)
        __COHERENT_RAM_END_UNALIGNED__ = .;
        /*
         * Memory page(s) mapped to this section will be marked
         * as device memory.  No other unexpected data must creep in.
         * Ensure the rest of the current memory page is unused.
         */
        . = NEXT(PAGE_SIZE);
        __COHERENT_RAM_END__ = .;
    } >RAM
#endif

    /*
     * Define a linker symbol to mark end of the RW memory area for this
     * image.
     */
    __RW_END__ = .;
    __BL2U_END__ = .;

    __BSS_SIZE__ = SIZEOF(.bss);

    ASSERT(. <= BL2U_LIMIT, "BL2U image has exceeded its limit.")
}