1 /* 2 * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions are met: 6 * 7 * Redistributions of source code must retain the above copyright notice, this 8 * list of conditions and the following disclaimer. 9 * 10 * Redistributions in binary form must reproduce the above copyright notice, 11 * this list of conditions and the following disclaimer in the documentation 12 * and/or other materials provided with the distribution. 13 * 14 * Neither the name of ARM nor the names of its contributors may be used 15 * to endorse or promote products derived from this software without specific 16 * prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 22 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 * POSSIBILITY OF SUCH DAMAGE. 29 */ 30 31 #include <stdio.h> 32 #include <string.h> 33 #include <assert.h> 34 #include <arch_helpers.h> 35 #include <console.h> 36 #include <platform.h> 37 #include <semihosting.h> 38 #include <bl_common.h> 39 #include <bl2.h> 40 #include "debug.h" 41 42 /******************************************************************************* 43 * The only thing to do in BL2 is to load further images and pass control to 44 * BL31. The memory occupied by BL2 will be reclaimed by BL3_x stages. BL2 runs 45 * entirely in S-EL1. Since arm standard c libraries are not PIC, printf et al 46 * are not available. We rely on assertions to signal error conditions 47 ******************************************************************************/ 48 void bl2_main(void) 49 { 50 meminfo *bl2_tzram_layout; 51 bl31_args *bl2_to_bl31_args; 52 unsigned long bl31_base, bl32_base = 0, bl33_base, el_status; 53 unsigned int bl2_load, bl31_load, mode; 54 55 /* Perform remaining generic architectural setup in S-El1 */ 56 bl2_arch_setup(); 57 58 /* Perform platform setup in BL1 */ 59 bl2_platform_setup(); 60 61 #if defined(__GNUC__) 62 printf("BL2 Built : %s, %s\n\r", __TIME__, __DATE__); 63 #endif 64 65 /* Find out how much free trusted ram remains after BL2 load */ 66 bl2_tzram_layout = bl2_plat_sec_mem_layout(); 67 68 /* 69 * Load BL31. BL1 tells BL2 whether it has been TOP or BOTTOM loaded. 70 * To avoid fragmentation of trusted SRAM memory, BL31 is always 71 * loaded opposite to BL2. This allows BL31 to reclaim BL2 memory 72 * while maintaining its free space in one contiguous chunk. 73 */ 74 bl2_load = bl2_tzram_layout->attr & LOAD_MASK; 75 assert((bl2_load == TOP_LOAD) || (bl2_load == BOT_LOAD)); 76 bl31_load = (bl2_load == TOP_LOAD) ? BOT_LOAD : TOP_LOAD; 77 bl31_base = load_image(bl2_tzram_layout, BL31_IMAGE_NAME, 78 bl31_load, BL31_BASE); 79 80 /* Assert if it has not been possible to load BL31 */ 81 if (bl31_base == 0) { 82 ERROR("Failed to load BL3-1.\n"); 83 panic(); 84 } 85 86 /* 87 * Get a pointer to the memory the platform has set aside to pass 88 * information to BL31. 89 */ 90 bl2_to_bl31_args = bl2_get_bl31_args_ptr(); 91 92 /* 93 * Load the BL32 image if there's one. It is upto to platform 94 * to specify where BL32 should be loaded if it exists. It 95 * could create space in the secure sram or point to a 96 * completely different memory. A zero size indicates that the 97 * platform does not want to load a BL32 image. 98 */ 99 if (bl2_to_bl31_args->bl32_meminfo.total_size) 100 bl32_base = load_image(&bl2_to_bl31_args->bl32_meminfo, 101 BL32_IMAGE_NAME, 102 bl2_to_bl31_args->bl32_meminfo.attr & 103 LOAD_MASK, 104 BL32_BASE); 105 106 /* 107 * Create a new layout of memory for BL31 as seen by BL2. This 108 * will gobble up all the BL2 memory. 109 */ 110 init_bl31_mem_layout(bl2_tzram_layout, 111 &bl2_to_bl31_args->bl31_meminfo, 112 bl31_load); 113 114 /* Load the BL33 image in non-secure memory provided by the platform */ 115 bl33_base = load_image(&bl2_to_bl31_args->bl33_meminfo, 116 BL33_IMAGE_NAME, 117 BOT_LOAD, 118 plat_get_ns_image_entrypoint()); 119 /* Halt if failed to load normal world firmware. */ 120 if (bl33_base == 0) { 121 ERROR("Failed to load BL3-3.\n"); 122 panic(); 123 } 124 125 /* 126 * BL2 also needs to tell BL31 where the non-trusted software image 127 * is located. 128 */ 129 bl2_to_bl31_args->bl33_image_info.entrypoint = bl33_base; 130 131 /* Figure out what mode we enter the non-secure world in */ 132 el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT; 133 el_status &= ID_AA64PFR0_ELX_MASK; 134 135 if (el_status) 136 mode = MODE_EL2; 137 else 138 mode = MODE_EL1; 139 140 /* 141 * TODO: Consider the possibility of specifying the SPSR in 142 * the FIP ToC and allowing the platform to have a say as 143 * well. 144 */ 145 bl2_to_bl31_args->bl33_image_info.spsr = 146 make_spsr(mode, MODE_SP_ELX, MODE_RW_64); 147 bl2_to_bl31_args->bl33_image_info.security_state = NON_SECURE; 148 149 if (bl32_base) { 150 /* Fill BL32 image info */ 151 bl2_to_bl31_args->bl32_image_info.entrypoint = bl32_base; 152 bl2_to_bl31_args->bl32_image_info.security_state = SECURE; 153 154 /* 155 * The Secure Payload Dispatcher service is responsible for 156 * setting the SPSR prior to entry into the BL32 image. 157 */ 158 bl2_to_bl31_args->bl32_image_info.spsr = 0; 159 } 160 161 /* Flush the entire BL31 args buffer */ 162 flush_dcache_range((unsigned long) bl2_to_bl31_args, 163 sizeof(*bl2_to_bl31_args)); 164 165 /* 166 * Run BL31 via an SMC to BL1. Information on how to pass control to 167 * the BL32 (if present) and BL33 software images will be passed to 168 * BL31 as an argument. 169 */ 170 run_image(bl31_base, 171 make_spsr(MODE_EL3, MODE_SP_ELX, MODE_RW_64), 172 SECURE, 173 (void *) bl2_to_bl31_args, 174 NULL); 175 } 176