1 /* 2 * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions are met: 6 * 7 * Redistributions of source code must retain the above copyright notice, this 8 * list of conditions and the following disclaimer. 9 * 10 * Redistributions in binary form must reproduce the above copyright notice, 11 * this list of conditions and the following disclaimer in the documentation 12 * and/or other materials provided with the distribution. 13 * 14 * Neither the name of ARM nor the names of its contributors may be used 15 * to endorse or promote products derived from this software without specific 16 * prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 22 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 * POSSIBILITY OF SUCH DAMAGE. 29 */ 30 31 #include <arch.h> 32 #include <arch_helpers.h> 33 #include <assert.h> 34 #include <bl_common.h> 35 #include <bl2.h> 36 #include <debug.h> 37 #include <platform.h> 38 #include <stdio.h> 39 #include "bl2_private.h" 40 41 /******************************************************************************* 42 * Runs BL31 from the given entry point. It jumps to a higher exception level 43 * through an SMC. 44 ******************************************************************************/ 45 static void __dead2 bl2_run_bl31(entry_point_info_t *bl31_ep_info, 46 unsigned long arg1, 47 unsigned long arg2) 48 { 49 /* Set the args pointer */ 50 bl31_ep_info->args.arg0 = arg1; 51 bl31_ep_info->args.arg1 = arg2; 52 53 /* Flush the params to be passed to memory */ 54 bl2_plat_flush_bl31_params(); 55 56 smc(RUN_IMAGE, (unsigned long)bl31_ep_info, 0, 0, 0, 0, 0, 0); 57 } 58 59 60 /******************************************************************************* 61 * The only thing to do in BL2 is to load further images and pass control to 62 * BL31. The memory occupied by BL2 will be reclaimed by BL3_x stages. BL2 runs 63 * entirely in S-EL1. Since arm standard c libraries are not PIC, printf et al 64 * are not available. We rely on assertions to signal error conditions 65 ******************************************************************************/ 66 void bl2_main(void) 67 { 68 meminfo_t *bl2_tzram_layout; 69 bl31_params_t *bl2_to_bl31_params; 70 bl31_plat_params_t *bl2_to_bl31_plat_params; 71 unsigned int bl2_load, bl31_load; 72 entry_point_info_t *bl31_ep_info; 73 int e; 74 75 /* Perform remaining generic architectural setup in S-El1 */ 76 bl2_arch_setup(); 77 78 /* Perform platform setup in BL1 */ 79 bl2_platform_setup(); 80 81 printf("BL2 %s\n\r", build_message); 82 83 /* Find out how much free trusted ram remains after BL2 load */ 84 bl2_tzram_layout = bl2_plat_sec_mem_layout(); 85 86 /* 87 * Get a pointer to the memory the platform has set aside to pass 88 * information to BL31. 89 */ 90 bl2_to_bl31_params = bl2_plat_get_bl31_params(); 91 bl2_to_bl31_plat_params = bl2_plat_get_bl31_plat_params(); 92 bl31_ep_info = bl2_plat_get_bl31_ep_info(); 93 94 /* 95 * Load BL31. BL1 tells BL2 whether it has been TOP or BOTTOM loaded. 96 * To avoid fragmentation of trusted SRAM memory, BL31 is always 97 * loaded opposite to BL2. This allows BL31 to reclaim BL2 memory 98 * while maintaining its free space in one contiguous chunk. 99 */ 100 bl2_load = bl2_tzram_layout->attr & LOAD_MASK; 101 assert((bl2_load == TOP_LOAD) || (bl2_load == BOT_LOAD)); 102 bl31_load = (bl2_load == TOP_LOAD) ? BOT_LOAD : TOP_LOAD; 103 e = load_image(bl2_tzram_layout, 104 BL31_IMAGE_NAME, 105 bl31_load, 106 BL31_BASE, 107 bl2_to_bl31_params->bl31_image_info, 108 bl31_ep_info); 109 110 /* Assert if it has not been possible to load BL31 */ 111 if (e) { 112 ERROR("Failed to load BL3-1.\n"); 113 panic(); 114 } 115 116 bl2_plat_set_bl31_ep_info(bl2_to_bl31_params->bl31_image_info, 117 bl31_ep_info); 118 119 /* 120 * Create a new layout of memory for BL31 as seen by BL2. This 121 * will gobble up all the BL2 memory. 122 */ 123 init_bl31_mem_layout(bl2_tzram_layout, 124 &bl2_to_bl31_plat_params->bl31_meminfo, 125 bl31_load); 126 127 /* Load the BL33 image in non-secure memory provided by the platform */ 128 e = load_image(&bl2_to_bl31_plat_params->bl33_meminfo, 129 BL33_IMAGE_NAME, 130 BOT_LOAD, 131 plat_get_ns_image_entrypoint(), 132 bl2_to_bl31_params->bl33_image_info, 133 bl2_to_bl31_params->bl33_ep_info); 134 135 /* Halt if failed to load normal world firmware. */ 136 if (e) { 137 ERROR("Failed to load BL3-3.\n"); 138 panic(); 139 } 140 bl2_plat_set_bl33_ep_info(bl2_to_bl31_params->bl33_image_info, 141 bl2_to_bl31_params->bl33_ep_info); 142 143 /* 144 * Load the BL32 image if there's one. It is upto to platform 145 * to specify where BL32 should be loaded if it exists. It 146 * could create space in the secure sram or point to a 147 * completely different memory. A zero size indicates that the 148 * platform does not want to load a BL32 image. 149 */ 150 if (bl2_to_bl31_plat_params->bl32_meminfo.total_size) { 151 e = load_image(&bl2_to_bl31_plat_params->bl32_meminfo, 152 BL32_IMAGE_NAME, 153 bl2_to_bl31_plat_params->bl32_meminfo.attr & 154 LOAD_MASK, 155 BL32_BASE, 156 bl2_to_bl31_params->bl32_image_info, 157 bl2_to_bl31_params->bl32_ep_info); 158 159 /* Halt if failed to load normal world firmware. */ 160 if (e) { 161 WARN("Failed to load BL3-2.\n"); 162 } else { 163 bl2_plat_set_bl32_ep_info( 164 bl2_to_bl31_params->bl32_image_info, 165 bl2_to_bl31_params->bl32_ep_info); 166 } 167 } 168 169 170 /* 171 * Run BL31 via an SMC to BL1. Information on how to pass control to 172 * the BL32 (if present) and BL33 software images will be passed to 173 * BL31 as an argument. 174 */ 175 bl2_run_bl31(bl31_ep_info, (unsigned long)bl2_to_bl31_params, 176 (unsigned long)bl2_to_bl31_plat_params); 177 } 178