1 /* 2 * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions are met: 6 * 7 * Redistributions of source code must retain the above copyright notice, this 8 * list of conditions and the following disclaimer. 9 * 10 * Redistributions in binary form must reproduce the above copyright notice, 11 * this list of conditions and the following disclaimer in the documentation 12 * and/or other materials provided with the distribution. 13 * 14 * Neither the name of ARM nor the names of its contributors may be used 15 * to endorse or promote products derived from this software without specific 16 * prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 22 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 * POSSIBILITY OF SUCH DAMAGE. 29 */ 30 31 #include <arch.h> 32 #include <arch_helpers.h> 33 #include <assert.h> 34 #include <bl_common.h> 35 #include <debug.h> 36 #include <platform.h> 37 #include <platform_def.h> 38 #include <stdio.h> 39 #include "bl2_private.h" 40 41 42 /******************************************************************************* 43 * The only thing to do in BL2 is to load further images and pass control to 44 * BL31. The memory occupied by BL2 will be reclaimed by BL3_x stages. BL2 runs 45 * entirely in S-EL1. Since arm standard c libraries are not PIC, printf et al 46 * are not available. We rely on assertions to signal error conditions 47 ******************************************************************************/ 48 void bl2_main(void) 49 { 50 meminfo_t *bl2_tzram_layout; 51 bl31_params_t *bl2_to_bl31_params; 52 unsigned int bl2_load, bl31_load; 53 entry_point_info_t *bl31_ep_info; 54 meminfo_t bl32_mem_info; 55 meminfo_t bl33_mem_info; 56 int e; 57 58 /* Perform remaining generic architectural setup in S-El1 */ 59 bl2_arch_setup(); 60 61 /* Perform platform setup in BL1 */ 62 bl2_platform_setup(); 63 64 printf("BL2 %s\n\r", build_message); 65 66 /* Find out how much free trusted ram remains after BL2 load */ 67 bl2_tzram_layout = bl2_plat_sec_mem_layout(); 68 69 /* 70 * Get a pointer to the memory the platform has set aside to pass 71 * information to BL31. 72 */ 73 bl2_to_bl31_params = bl2_plat_get_bl31_params(); 74 bl31_ep_info = bl2_plat_get_bl31_ep_info(); 75 76 /* Set the X0 parameter to bl31 */ 77 bl31_ep_info->args.arg0 = (unsigned long)bl2_to_bl31_params; 78 79 /* 80 * Load BL31. BL1 tells BL2 whether it has been TOP or BOTTOM loaded. 81 * To avoid fragmentation of trusted SRAM memory, BL31 is always 82 * loaded opposite to BL2. This allows BL31 to reclaim BL2 memory 83 * while maintaining its free space in one contiguous chunk. 84 */ 85 bl2_load = bl2_tzram_layout->attr & LOAD_MASK; 86 assert((bl2_load == TOP_LOAD) || (bl2_load == BOT_LOAD)); 87 bl31_load = (bl2_load == TOP_LOAD) ? BOT_LOAD : TOP_LOAD; 88 e = load_image(bl2_tzram_layout, 89 BL31_IMAGE_NAME, 90 bl31_load, 91 BL31_BASE, 92 bl2_to_bl31_params->bl31_image_info, 93 bl31_ep_info); 94 95 /* Assert if it has not been possible to load BL31 */ 96 if (e) { 97 ERROR("Failed to load BL3-1.\n"); 98 panic(); 99 } 100 101 bl2_plat_set_bl31_ep_info(bl2_to_bl31_params->bl31_image_info, 102 bl31_ep_info); 103 104 bl2_plat_get_bl33_meminfo(&bl33_mem_info); 105 106 /* Load the BL33 image in non-secure memory provided by the platform */ 107 e = load_image(&bl33_mem_info, 108 BL33_IMAGE_NAME, 109 BOT_LOAD, 110 plat_get_ns_image_entrypoint(), 111 bl2_to_bl31_params->bl33_image_info, 112 bl2_to_bl31_params->bl33_ep_info); 113 114 /* Halt if failed to load normal world firmware. */ 115 if (e) { 116 ERROR("Failed to load BL3-3.\n"); 117 panic(); 118 } 119 bl2_plat_set_bl33_ep_info(bl2_to_bl31_params->bl33_image_info, 120 bl2_to_bl31_params->bl33_ep_info); 121 122 123 #ifdef BL32_BASE 124 /* 125 * Load the BL32 image if there's one. It is upto to platform 126 * to specify where BL32 should be loaded if it exists. It 127 * could create space in the secure sram or point to a 128 * completely different memory. 129 * 130 * If a platform does not want to attempt to load BL3-2 image 131 * it must leave BL32_BASE undefined 132 */ 133 bl2_plat_get_bl32_meminfo(&bl32_mem_info); 134 e = load_image(&bl32_mem_info, 135 BL32_IMAGE_NAME, 136 bl32_mem_info.attr & LOAD_MASK, 137 BL32_BASE, 138 bl2_to_bl31_params->bl32_image_info, 139 bl2_to_bl31_params->bl32_ep_info); 140 141 /* Issue a diagnostic if no Secure Payload could be loaded */ 142 if (e) { 143 WARN("Failed to load BL3-2.\n"); 144 } else { 145 bl2_plat_set_bl32_ep_info( 146 bl2_to_bl31_params->bl32_image_info, 147 bl2_to_bl31_params->bl32_ep_info); 148 } 149 #endif /* BL32_BASE */ 150 151 /* Flush the params to be passed to memory */ 152 bl2_plat_flush_bl31_params(); 153 154 /* 155 * Run BL31 via an SMC to BL1. Information on how to pass control to 156 * the BL32 (if present) and BL33 software images will be passed to 157 * BL31 as an argument. 158 */ 159 smc(RUN_IMAGE, (unsigned long)bl31_ep_info, 0, 0, 0, 0, 0, 0); 160 } 161