1 /* 2 * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions are met: 6 * 7 * Redistributions of source code must retain the above copyright notice, this 8 * list of conditions and the following disclaimer. 9 * 10 * Redistributions in binary form must reproduce the above copyright notice, 11 * this list of conditions and the following disclaimer in the documentation 12 * and/or other materials provided with the distribution. 13 * 14 * Neither the name of ARM nor the names of its contributors may be used 15 * to endorse or promote products derived from this software without specific 16 * prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 22 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 * POSSIBILITY OF SUCH DAMAGE. 29 */ 30 31 #include <arch.h> 32 #include <arch_helpers.h> 33 #include <assert.h> 34 #include <bl_common.h> 35 #include <bl1.h> 36 #include <platform.h> 37 #include <stdio.h> 38 #include "bl1_private.h" 39 40 /******************************************************************************* 41 * Function to perform late architectural and platform specific initialization. 42 * It also locates and loads the BL2 raw binary image in the trusted DRAM. Only 43 * called by the primary cpu after a cold boot. 44 * TODO: Add support for alternative image load mechanism e.g using virtio/elf 45 * loader etc. 46 ******************************************************************************/ 47 void bl1_main(void) 48 { 49 #if DEBUG 50 unsigned long sctlr_el3 = read_sctlr_el3(); 51 #endif 52 unsigned long bl2_base; 53 unsigned int load_type = TOP_LOAD, spsr; 54 meminfo_t *bl1_tzram_layout; 55 meminfo_t *bl2_tzram_layout = 0x0; 56 57 /* 58 * Ensure that MMU/Caches and coherency are turned on 59 */ 60 assert(sctlr_el3 | SCTLR_M_BIT); 61 assert(sctlr_el3 | SCTLR_C_BIT); 62 assert(sctlr_el3 | SCTLR_I_BIT); 63 64 /* Perform remaining generic architectural setup from EL3 */ 65 bl1_arch_setup(); 66 67 /* Perform platform setup in BL1. */ 68 bl1_platform_setup(); 69 70 /* Announce our arrival */ 71 printf(FIRMWARE_WELCOME_STR); 72 printf("%s\n\r", build_message); 73 74 /* 75 * Find out how much free trusted ram remains after BL1 load 76 * & load the BL2 image at its top 77 */ 78 bl1_tzram_layout = bl1_plat_sec_mem_layout(); 79 bl2_base = load_image(bl1_tzram_layout, 80 (const char *) BL2_IMAGE_NAME, 81 load_type, BL2_BASE); 82 83 /* 84 * Create a new layout of memory for BL2 as seen by BL1 i.e. 85 * tell it the amount of total and free memory available. 86 * This layout is created at the first free address visible 87 * to BL2. BL2 will read the memory layout before using its 88 * memory for other purposes. 89 */ 90 bl2_tzram_layout = (meminfo_t *) bl1_tzram_layout->free_base; 91 init_bl2_mem_layout(bl1_tzram_layout, 92 bl2_tzram_layout, 93 load_type, 94 bl2_base); 95 96 if (bl2_base) { 97 bl1_arch_next_el_setup(); 98 spsr = make_spsr(MODE_EL1, MODE_SP_ELX, MODE_RW_64); 99 printf("Booting trusted firmware boot loader stage 2\n\r"); 100 #if DEBUG 101 printf("BL2 address = 0x%llx \n\r", (unsigned long long) bl2_base); 102 printf("BL2 cpsr = 0x%x \n\r", spsr); 103 printf("BL2 memory layout address = 0x%llx \n\r", 104 (unsigned long long) bl2_tzram_layout); 105 #endif 106 run_image(bl2_base, 107 spsr, 108 SECURE, 109 (void *) bl2_tzram_layout, 110 NULL); 111 } 112 113 /* 114 * TODO: print failure to load BL2 but also add a tzwdog timer 115 * which will reset the system eventually. 116 */ 117 printf("Failed to load boot loader stage 2 (BL2) firmware.\n\r"); 118 return; 119 } 120 121 /******************************************************************************* 122 * Temporary function to print the fact that BL2 has done its job and BL31 is 123 * about to be loaded. This is needed as long as printfs cannot be used 124 ******************************************************************************/ 125 void display_boot_progress(unsigned long entrypoint, 126 unsigned long spsr, 127 unsigned long mem_layout, 128 unsigned long ns_image_info) 129 { 130 printf("Booting trusted firmware boot loader stage 3\n\r"); 131 #if DEBUG 132 printf("BL31 address = 0x%llx \n\r", (unsigned long long) entrypoint); 133 printf("BL31 cpsr = 0x%llx \n\r", (unsigned long long)spsr); 134 printf("BL31 memory layout address = 0x%llx \n\r", (unsigned long long)mem_layout); 135 printf("BL31 non-trusted image info address = 0x%llx\n\r", (unsigned long long)ns_image_info); 136 #endif 137 return; 138 } 139