xref: /rk3399_ARM-atf/bl1/bl1.ld.S (revision 0a30cf54af7bb1f77b405062b1d5b44e809d0290)
1/*
2 * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
3 *
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions are met:
6 *
7 * Redistributions of source code must retain the above copyright notice, this
8 * list of conditions and the following disclaimer.
9 *
10 * Redistributions in binary form must reproduce the above copyright notice,
11 * this list of conditions and the following disclaimer in the documentation
12 * and/or other materials provided with the distribution.
13 *
14 * Neither the name of ARM nor the names of its contributors may be used
15 * to endorse or promote products derived from this software without specific
16 * prior written permission.
17 *
18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
22 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28 * POSSIBILITY OF SUCH DAMAGE.
29 */
30
31#include <platform.h>
32
33OUTPUT_FORMAT(PLATFORM_LINKER_FORMAT)
34OUTPUT_ARCH(PLATFORM_LINKER_ARCH)
35ENTRY(bl1_entrypoint)
36
37MEMORY {
38    ROM (rx): ORIGIN = TZROM_BASE, LENGTH = TZROM_SIZE
39    RAM (rwx): ORIGIN = TZRAM_BASE, LENGTH = TZRAM_SIZE
40}
41
42SECTIONS
43{
44    ro : {
45        __RO_START__ = .;
46        *bl1_entrypoint.o(.text*)
47        *(.text*)
48        *(.rodata*)
49        *(.vectors)
50        __RO_END__ = .;
51    } >ROM
52
53    /*
54     * The .data section gets copied from ROM to RAM at runtime.
55     * Its LMA and VMA must be 16-byte aligned.
56     */
57    . = NEXT(16);        /* Align LMA */
58    .data : ALIGN(16) {  /* Align VMA */
59        __DATA_RAM_START__ = .;
60        *(.data*)
61        __DATA_RAM_END__ = .;
62    } >RAM AT>ROM
63
64    stacks (NOLOAD) : {
65        __STACKS_START__ = .;
66        *(tzfw_normal_stacks)
67        __STACKS_END__ = .;
68    } >RAM
69
70    /*
71     * The .bss section gets initialised to 0 at runtime.
72     * Its base address must be 16-byte aligned.
73     */
74    .bss : ALIGN(16) {
75        __BSS_START__ = .;
76        *(.bss*)
77        *(COMMON)
78        __BSS_END__ = .;
79    } >RAM
80
81    /*
82     * The xlat_table section is for full, aligned page tables (4K).
83     * Removing them from .bss avoids forcing 4K alignment on
84     * the .bss section and eliminates the unecessary zero init
85     */
86    xlat_table (NOLOAD) : {
87        *(xlat_table)
88    } >RAM
89
90    /*
91     * The base address of the coherent memory section must be page-aligned (4K)
92     * to guarantee that the coherent data are stored on their own pages and
93     * are not mixed with normal data.  This is required to set up the correct
94     * memory attributes for the coherent data page tables.
95     */
96    coherent_ram (NOLOAD) : ALIGN(4096) {
97        __COHERENT_RAM_START__ = .;
98        *(tzfw_coherent_mem)
99        __COHERENT_RAM_END_UNALIGNED__ = .;
100        /*
101         * Memory page(s) mapped to this section will be marked
102         * as device memory.  No other unexpected data must creep in.
103         * Ensure the rest of the current memory page is unused.
104         */
105        . = NEXT(4096);
106        __COHERENT_RAM_END__ = .;
107    } >RAM
108
109    __BL1_RAM_START__ = ADDR(.data);
110    __BL1_RAM_END__ = .;
111
112    __DATA_ROM_START__ = LOADADDR(.data);
113    __DATA_SIZE__ = SIZEOF(.data);
114
115    __BSS_SIZE__ = SIZEOF(.bss);
116
117    __COHERENT_RAM_UNALIGNED_SIZE__ =
118        __COHERENT_RAM_END_UNALIGNED__ - __COHERENT_RAM_START__;
119
120    ASSERT(. <= BL31_BASE, "BL1 image overlaps BL31 image.")
121}
122