xref: /rk3399_ARM-atf/bl1/aarch64/bl1_exceptions.S (revision 0c8d4fef28768233f1f46b4d085f904293dffd2c)

/*
 * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * Redistributions of source code must retain the above copyright notice, this
 * list of conditions and the following disclaimer.
 *
 * Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 *
 * Neither the name of ARM nor the names of its contributors may be used
 * to endorse or promote products derived from this software without specific
 * prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#include <arch.h>
#include <asm_macros.S>
#include <bl_common.h>
#include <runtime_svc.h>

	.globl	bl1_exceptions

	.section	.vectors, "ax"; .align 11

	/* -----------------------------------------------------
	 * Very simple stackless exception handlers used by BL1.
	 * -----------------------------------------------------
	 */
	.align	7
bl1_exceptions:
	/* -----------------------------------------------------
	 * Current EL with SP0 : 0x0 - 0x180
	 * -----------------------------------------------------
	 */
SynchronousExceptionSP0:
	mov	x0, #SYNC_EXCEPTION_SP_EL0
	bl	plat_report_exception
	b	SynchronousExceptionSP0
	check_vector_size SynchronousExceptionSP0

	.align	7
IrqSP0:
	mov	x0, #IRQ_SP_EL0
	bl	plat_report_exception
	b	IrqSP0
	check_vector_size IrqSP0

	.align	7
FiqSP0:
	mov	x0, #FIQ_SP_EL0
	bl	plat_report_exception
	b	FiqSP0
	check_vector_size FiqSP0

	.align	7
SErrorSP0:
	mov	x0, #SERROR_SP_EL0
	bl	plat_report_exception
	b	SErrorSP0
	check_vector_size SErrorSP0

	/* -----------------------------------------------------
	 * Current EL with SPx: 0x200 - 0x380
	 * -----------------------------------------------------
	 */
	.align	7
SynchronousExceptionSPx:
	mov	x0, #SYNC_EXCEPTION_SP_ELX
	bl	plat_report_exception
	b	SynchronousExceptionSPx
	check_vector_size SynchronousExceptionSPx

	.align	7
IrqSPx:
	mov	x0, #IRQ_SP_ELX
	bl	plat_report_exception
	b	IrqSPx
	check_vector_size IrqSPx

	.align	7
FiqSPx:
	mov	x0, #FIQ_SP_ELX
	bl	plat_report_exception
	b	FiqSPx
	check_vector_size FiqSPx

	.align	7
SErrorSPx:
	mov	x0, #SERROR_SP_ELX
	bl	plat_report_exception
	b	SErrorSPx
	check_vector_size SErrorSPx

	/* -----------------------------------------------------
	 * Lower EL using AArch64 : 0x400 - 0x580
	 * -----------------------------------------------------
	 */
	.align	7
SynchronousExceptionA64:
	/* Enable the SError interrupt */
	msr	daifclr, #DAIF_ABT_BIT

	/* ------------------------------------------------
	 * Only a single SMC exception from BL2 to ask
	 * BL1 to pass EL3 control to BL31 is expected
	 * here.
	 * It expects X0 with RUN_IMAGE SMC function id
	 * X1 with address of a entry_point_info_t structure
	 * describing the BL3-1 entrypoint
	 * ------------------------------------------------
	 */
	mov	x19, x0
	mov	x20, x1

	mrs	x0, esr_el3
	ubfx	x1, x0, #ESR_EC_SHIFT, #ESR_EC_LENGTH
	cmp	x1, #EC_AARCH64_SMC
	b.ne	panic

	mov	x0, #RUN_IMAGE
	cmp	x19, x0
	b.ne	panic

	mov	x0, x20
	bl	display_boot_progress

	ldp	x0, x1, [x20, #ENTRY_POINT_INFO_PC_OFFSET]
	msr	elr_el3, x0
	msr	spsr_el3, x1
	ubfx	x0, x1, #MODE_EL_SHIFT, #2
	cmp	x0, #MODE_EL3
	b.ne	panic

	bl	disable_mmu_icache_el3
	tlbi	alle3

	ldp	x6, x7, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x30)]
	ldp	x4, x5, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x20)]
	ldp	x2, x3, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x10)]
	ldp	x0, x1, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x0)]
	eret
panic:
	mov	x0, #SYNC_EXCEPTION_AARCH64
	bl	plat_report_exception

	wfi
	b	panic
	check_vector_size SynchronousExceptionA64

	.align	7
IrqA64:
	mov	x0, #IRQ_AARCH64
	bl	plat_report_exception
	b	IrqA64
	check_vector_size IrqA64

	.align	7
FiqA64:
	mov	x0, #FIQ_AARCH64
	bl	plat_report_exception
	b	FiqA64
	check_vector_size FiqA64

	.align	7
SErrorA64:
	mov	x0, #SERROR_AARCH64
	bl	plat_report_exception
	b   	SErrorA64
	check_vector_size SErrorA64

	/* -----------------------------------------------------
	 * Lower EL using AArch32 : 0x0 - 0x180
	 * -----------------------------------------------------
	 */
	.align	7
SynchronousExceptionA32:
	mov	x0, #SYNC_EXCEPTION_AARCH32
	bl	plat_report_exception
	b	SynchronousExceptionA32
	check_vector_size SynchronousExceptionA32

	.align	7
IrqA32:
	mov	x0, #IRQ_AARCH32
	bl	plat_report_exception
	b	IrqA32
	check_vector_size IrqA32

	.align	7
FiqA32:
	mov	x0, #FIQ_AARCH32
	bl	plat_report_exception
	b	FiqA32
	check_vector_size FiqA32

	.align	7
SErrorA32:
	mov	x0, #SERROR_AARCH32
	bl	plat_report_exception
	b	SErrorA32
	check_vector_size SErrorA32