xref: /optee_os/lib/libmbedtls/mbedtls/ChangeLog (revision a1d5c81f8834a9d2c6f4372cce2e59e70e709121)
1mbed TLS ChangeLog (Sorted per branch, date)
2
3= mbed TLS 2.22.0 branch released 2020-04-14
4
5New deprecations
6   * Deprecate MBEDTLS_SSL_HW_RECORD_ACCEL that enables function hooks in the
7     SSL module for hardware acceleration of individual records.
8   * Deprecate mbedtls_ssl_get_max_frag_len() in favour of
9     mbedtls_ssl_get_output_max_frag_len() and
10     mbedtls_ssl_get_input_max_frag_len() to be more precise about which max
11     fragment length is desired.
12
13Security
14   * Fix issue in DTLS handling of new associations with the same parameters
15     (RFC 6347 section 4.2.8): an attacker able to send forged UDP packets to
16     the server could cause it to drop established associations with
17     legitimate clients, resulting in a Denial of Service. This could only
18     happen when MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE was enabled in config.h
19     (which it is by default).
20   * Fix side channel in ECC code that allowed an adversary with access to
21     precise enough timing and memory access information (typically an
22     untrusted operating system attacking a secure enclave) to fully recover
23     an ECDSA private key. Found and reported by Alejandro Cabrera Aldaya,
24     Billy Brumley and Cesar Pereida Garcia. CVE-2020-10932
25   * Fix a potentially remotely exploitable buffer overread in a
26     DTLS client when parsing the Hello Verify Request message.
27
28Features
29   * The new build option MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH automatically
30     resizes the I/O buffers before and after handshakes, reducing the memory
31     consumption during application data transfer.
32
33Bugfix
34   * Fix compilation failure when both MBEDTLS_SSL_PROTO_DTLS and
35     MBEDTLS_SSL_HW_RECORD_ACCEL are enabled.
36   * Remove a spurious check in ssl_parse_client_psk_identity that triggered
37     a warning with some compilers. Fix contributed by irwir in #2856.
38   * Fix a function name in a debug message. Contributed by Ercan Ozturk in
39     #3013.
40
41Changes
42   * Mbed Crypto is no longer a Git submodule. The crypto part of the library
43     is back directly in the present repository.
44   * Split mbedtls_ssl_get_max_frag_len() into
45     mbedtls_ssl_get_output_max_frag_len() and
46     mbedtls_ssl_get_input_max_frag_len() to ensure that a sufficient input
47     buffer is allocated by the server (if MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
48     is defined), regardless of what MFL was configured for it.
49
50= mbed TLS 2.21.0 branch released 2020-02-20
51
52New deprecations
53   * Deprecate MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO that enables parsing
54     SSLv2 ClientHello messages.
55   * Deprecate MBEDTLS_SSL_PROTO_SSL3 that enables support for SSLv3.
56   * Deprecate for MBEDTLS_PKCS11_C, the wrapper around the pkcs11-helper
57     library which allows TLS authentication to use keys stored in a
58     PKCS#11 token such as a smartcard.
59
60Security
61   * Fix potential memory overread when performing an ECDSA signature
62     operation. The overread only happens with cryptographically low
63     probability (of the order of 2^-n where n is the bitsize of the curve)
64     unless the RNG is broken, and could result in information disclosure or
65     denial of service (application crash or extra resource consumption).
66     Found by Auke Zeilstra and Peter Schwabe, using static analysis.
67   * To avoid a side channel vulnerability when parsing an RSA private key,
68     read all the CRT parameters from the DER structure rather than
69     reconstructing them. Found by Alejandro Cabrera Aldaya and Billy Bob
70     Brumley. Reported and fix contributed by Jack Lloyd.
71     ARMmbed/mbed-crypto#352
72
73Features
74   * The new build option MBEDTLS_SHA512_NO_SHA384 allows building SHA-512
75     support without SHA-384.
76
77API changes
78   * Change the encoding of key types and curves in the PSA API. The new
79     values are aligned with the upcoming release of the PSA Crypto API
80     specification version 1.0.0. The main change which may break some
81     existing code is that elliptic curve key types no longer encode the
82     exact curve: a psa_ecc_curve_t or psa_key_type_t value only encodes
83     a curve family and the key size determines the exact curve (for example,
84     PSA_ECC_CURVE_SECP_R1 with 256 bits is P256R1). ARMmbed/mbed-crypto#330
85
86Bugfix
87   * Fix an unchecked call to mbedtls_md() in the x509write module.
88   * Fix build failure with MBEDTLS_ZLIB_SUPPORT enabled. Reported by
89     Jack Lloyd in #2859. Fix submitted by jiblime in #2963.
90   * Fix some false-positive uninitialized variable warnings in X.509. Fix
91     contributed by apple-ihack-geek in #2663.
92   * Fix a possible error code mangling in psa_mac_verify_finish() when
93     a cryptographic accelerator fails. ARMmbed/mbed-crypto#345
94   * Fix a bug in mbedtls_pk_parse_key() that would cause it to accept some
95     RSA keys that would later be rejected by functions expecting private
96     keys. Found by Catena cyber using oss-fuzz (issue 20467).
97   * Fix a bug in mbedtls_pk_parse_key() that would cause it to
98     accept some RSA keys with invalid values by silently fixing those values.
99
100= mbed TLS 2.20.0 branch released 2020-01-15
101
102Default behavior changes
103   * The initial seeding of a CTR_DRBG instance makes a second call to the
104     entropy function to obtain entropy for a nonce if the entropy size is less
105     than 3/2 times the key size. In case you want to disable the extra call to
106     grab entropy, you can call mbedtls_ctr_drbg_set_nonce_len() to force the
107     nonce length to 0.
108
109Security
110   * Enforce that mbedtls_entropy_func() gathers a total of
111     MBEDTLS_ENTROPY_BLOCK_SIZE bytes or more from strong sources. In the
112     default configuration, on a platform with a single entropy source, the
113     entropy module formerly only grabbed 32 bytes, which is good enough for
114     security if the source is genuinely strong, but less than the expected 64
115     bytes (size of the entropy accumulator).
116   * Zeroize local variables in mbedtls_internal_aes_encrypt() and
117     mbedtls_internal_aes_decrypt() before exiting the function. The value of
118     these variables can be used to recover the last round key. To follow best
119     practice and to limit the impact of buffer overread vulnerabilities (like
120     Heartbleed) we need to zeroize them before exiting the function.
121     Issue reported by Tuba Yavuz, Farhaan Fowze, Ken (Yihang) Bai,
122     Grant Hernandez, and Kevin Butler (University of Florida) and
123     Dave Tian (Purdue University).
124   * Fix side channel vulnerability in ECDSA. Our bignum implementation is not
125     constant time/constant trace, so side channel attacks can retrieve the
126     blinded value, factor it (as it is smaller than RSA keys and not guaranteed
127     to have only large prime factors), and then, by brute force, recover the
128     key. Reported by Alejandro Cabrera Aldaya and Billy Brumley.
129   * Fix side channel vulnerability in ECDSA key generation. Obtaining precise
130     timings on the comparison in the key generation enabled the attacker to
131     learn leading bits of the ephemeral key used during ECDSA signatures and to
132     recover the private key. Reported by Jeremy Dubeuf.
133   * Catch failure of AES functions in mbedtls_ctr_drbg_random(). Uncaught
134     failures could happen with alternative implementations of AES. Bug
135     reported and fix proposed by Johan Uppman Bruce and Christoffer Lauri,
136     Sectra.
137
138Features
139   * Key derivation inputs in the PSA API can now either come from a key object
140     or from a buffer regardless of the step type.
141   * The CTR_DRBG module can grab a nonce from the entropy source during the
142     initial seeding. The default nonce length is chosen based on the key size
143     to achieve the security strength defined by NIST SP 800-90A. You can
144     change it with mbedtls_ctr_drbg_set_nonce_len().
145   * Add ENUMERATED tag support to the ASN.1 module. Contributed by
146     msopiha-linaro in ARMmbed/mbed-crypto#307.
147
148API changes
149   * In the PSA API, forbid zero-length keys. To pass a zero-length input to a
150     key derivation function, use a buffer instead (this is now always
151     possible).
152   * Rename psa_asymmetric_sign() to psa_sign_hash() and
153     psa_asymmetric_verify() to psa_verify_hash().
154
155Bugfix
156   * Fix an incorrect size in a debugging message. Reported and fix
157     submitted by irwir. Fixes #2717.
158   * Fix an unused variable warning when compiling without DTLS.
159     Reported and fix submitted by irwir. Fixes #2800.
160   * Remove a useless assignment. Reported and fix submitted by irwir.
161     Fixes #2801.
162   * Fix a buffer overflow in the PSA HMAC code when using a long key with an
163     unsupported algorithm. Fixes ARMmbed/mbed-crypto#254.
164   * Fix mbedtls_asn1_get_int to support any number of leading zeros. Credit
165     to OSS-Fuzz for finding a bug in an intermediate version of the fix.
166   * Fix mbedtls_asn1_get_bitstring_null to correctly parse bitstrings of at
167     most 2 bytes.
168   * mbedtls_ctr_drbg_set_entropy_len() and
169     mbedtls_hmac_drbg_set_entropy_len() now work if you call them before
170     mbedtls_ctr_drbg_seed() or mbedtls_hmac_drbg_seed().
171
172Changes
173   * Remove the technical possibility to define custom mbedtls_md_info
174     structures, which was exposed only in an internal header.
175   * psa_close_key(0) and psa_destroy_key(0) now succeed (doing nothing, as
176     before).
177   * Variables containing error codes are now initialized to an error code
178     rather than success, so that coding mistakes or memory corruption tends to
179     cause functions to return this error code rather than a success. There are
180     no known instances where this changes the behavior of the library: this is
181     merely a robustness improvement. ARMmbed/mbed-crypto#323
182   * Remove a useless call to mbedtls_ecp_group_free(). Contributed by
183     Alexander Krizhanovsky in ARMmbed/mbed-crypto#210.
184   * Speed up PBKDF2 by caching the digest calculation. Contributed by Jack
185     Lloyd and Fortanix Inc in ARMmbed/mbed-crypto#277.
186   * Small performance improvement of mbedtls_mpi_div_mpi(). Contributed by
187     Alexander Krizhanovsky in ARMmbed/mbed-crypto#308.
188
189= mbed TLS 2.19.1 branch released 2019-09-16
190
191Features
192   * Declare include headers as PUBLIC to propagate to CMake project consumers
193     Contributed by Zachary J. Fields in PR #2949.
194   * Add nss_keylog to ssl_client2 and ssl_server2, enabling easier analysis of
195     TLS sessions with tools like Wireshark.
196
197API Changes
198   * Make client_random and server_random const in
199     mbedtls_ssl_export_keys_ext_t, so that the key exporter is discouraged
200     from modifying the client/server hello.
201
202Bugfix
203   * Fix some false-positive uninitialized variable warnings in crypto. Fix
204     contributed by apple-ihack-geek in #2663.
205
206= mbed TLS 2.19.0 branch released 2019-09-06
207
208Security
209   * Fix a missing error detection in ECJPAKE. This could have caused a
210     predictable shared secret if a hardware accelerator failed and the other
211     side of the key exchange had a similar bug.
212   * When writing a private EC key, use a constant size for the private
213     value, as specified in RFC 5915. Previously, the value was written
214     as an ASN.1 INTEGER, which caused the size of the key to leak
215     about 1 bit of information on average and could cause the value to be
216     1 byte too large for the output buffer.
217   * The deterministic ECDSA calculation reused the scheme's HMAC-DRBG to
218     implement blinding. Because of this for the same key and message the same
219     blinding value was generated. This reduced the effectiveness of the
220     countermeasure and leaked information about the private key through side
221     channels. Reported by Jack Lloyd.
222
223Features
224   * Add new API functions mbedtls_ssl_session_save() and
225     mbedtls_ssl_session_load() to allow serializing a session, for example to
226     store it in non-volatile storage, and later using it for TLS session
227     resumption.
228   * Add a new API function mbedtls_ssl_check_record() to allow checking that
229     an incoming record is valid, authentic and has not been seen before. This
230     feature can be used alongside Connection ID and SSL context serialisation.
231     The feature is enabled at compile-time by MBEDTLS_SSL_RECORD_CHECKING
232     option.
233   * New implementation of X25519 (ECDH using Curve25519) from Project Everest
234     (https://project-everest.github.io/). It can be enabled at compile time
235     with MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED. This implementation is formally
236     verified and significantly faster, but is only supported on x86 platforms
237     (32-bit and 64-bit) using GCC, Clang or Visual Studio. Contributed by
238     Christoph Wintersteiger from Microsoft Research.
239   * Add mbedtls_net_close(), enabling the building of forking servers where
240     the parent process closes the client socket and continue accepting, and
241     the child process closes the listening socket and handles the client
242     socket. Contributed by Robert Larsen in #2803.
243
244API Changes
245   * Add DER-encoded test CRTs to library/certs.c, allowing
246     the example programs ssl_server2 and ssl_client2 to be run
247     if MBEDTLS_FS_IO and MBEDTLS_PEM_PARSE_C are unset. Fixes #2254.
248   * The HAVEGE state type now uses uint32_t elements instead of int.
249   * The functions mbedtls_ecp_curve_list() and mbedtls_ecp_grp_id_list() now
250     list all curves for which at least one of ECDH or ECDSA is supported, not
251     just curves for which both are supported. Call mbedtls_ecdsa_can_do() or
252     mbedtls_ecdh_can_do() on each result to check whether each algorithm is
253     supported.
254   * The new function mbedtls_ecdsa_sign_det_ext() is similar to
255     mbedtls_ecdsa_sign_det() but allows passing an external RNG for the
256     purpose of blinding.
257
258New deprecations
259   * Deprecate mbedtls_ecdsa_sign_det() in favor of a functions that can take an
260     RNG function as an input.
261   * Calling mbedtls_ecdsa_write_signature() with NULL as the f_rng argument
262     is now deprecated.
263
264Bugfix
265   * Fix missing bounds checks in X.509 parsing functions that could
266     lead to successful parsing of ill-formed X.509 CRTs. Fixes #2437.
267   * Fix multiple X.509 functions previously returning ASN.1 low-level error
268     codes to always wrap these codes into X.509 high level error codes before
269     returning. Fixes #2431.
270   * Fix to allow building test suites with any warning that detects unused
271     functions. Fixes #1628.
272   * Fix typo in net_would_block(). Fixes #528 reported by github-monoculture.
273   * Remove redundant include file in timing.c. Fixes #2640 reported by irwir.
274   * Fix build failure when building with mingw on Windows by including
275     stdarg.h where needed. Fixes #2656.
276   * Fix Visual Studio Release x64 build configuration by inheriting
277     PlatformToolset from the project configuration. Fixes #1430 reported by
278     irwir.
279   * Enable Suite B with subset of ECP curves. Make sure the code compiles even
280     if some curves are not defined. Fixes #1591 reported by dbedev.
281   * Fix misuse of signed arithmetic in the HAVEGE module. #2598
282   * Avoid use of statically sized stack buffers for certificate writing.
283     This previously limited the maximum size of DER encoded certificates
284     in mbedtls_x509write_crt_der() to 2Kb. Reported by soccerGB in #2631.
285   * Fix partial zeroing in x509_get_other_name. Found and fixed by ekse, #2716.
286   * Update test certificates that were about to expire. Reported by
287     Bernhard M. Wiedemann in #2357.
288   * Fix the build on ARMv5TE in ARM mode to not use assembly instructions
289     that are only available in Thumb mode. Fix contributed by Aurelien Jarno
290     in #2169.
291   * Fix propagation of restart contexts in restartable EC operations.
292     This could previously lead to segmentation faults in builds using an
293     address-sanitizer and enabling but not using MBEDTLS_ECP_RESTARTABLE.
294   * Fix memory leak in in mpi_miller_rabin(). Contributed by
295     Jens Wiklander <jens.wiklander@linaro.org> in #2363
296   * Improve code clarity in x509_crt module, removing false-positive
297     uninitialized variable warnings on some recent toolchains (GCC8, etc).
298     Discovered and fixed by Andy Gross (Linaro), #2392.
299   * Fix bug in endianness conversion in bignum module. This lead to
300     functionally incorrect code on bigendian systems which don't have
301     __BYTE_ORDER__ defined. Reported by Brendan Shanks. Fixes #2622.
302
303Changes
304   * Replace multiple uses of MD2 by SHA-256 in X.509 test suite. Fixes #821.
305   * Make it easier to define MBEDTLS_PARAM_FAILED as assert (which config.h
306     suggests). #2671
307   * Make `make clean` clean all programs always. Fixes #1862.
308   * Add a Dockerfile and helper scripts (all-in-docker.sh, basic-in-docker.sh,
309     docker-env.sh) to simplify running test suites on a Linux host. Contributed
310     by Peter Kolbus (Garmin).
311   * Add `reproducible` option to `ssl_client2` and `ssl_server2` to enable
312     test runs without variability. Contributed by Philippe Antoine (Catena
313     cyber) in #2681.
314   * Extended .gitignore to ignore Visual Studio artifacts. Fixed by ConfusedSushi.
315   * Adds fuzz targets, especially for continuous fuzzing with OSS-Fuzz.
316     Contributed by Philippe Antoine (Catena cyber).
317   * Remove the crypto part of the library from Mbed TLS. The crypto
318     code and tests are now only available via Mbed Crypto, which
319     Mbed TLS references as a Git submodule.
320
321= mbed TLS 2.18.1 branch released 2019-07-12
322
323Bugfix
324   * Fix build failure when building with mingw on Windows by including
325     stdarg.h where needed. Fixes #2656.
326
327Changes
328   * Enable building of Mbed TLS as a CMake subproject. Suggested and fixed by
329     Ashley Duncan in #2609.
330
331= mbed TLS 2.18.0 branch released 2019-06-11
332
333Features
334   * Add the Any Policy certificate policy oid, as defined in
335     rfc 5280 section 4.2.1.4.
336   * It is now possible to use NIST key wrap mode via the mbedtls_cipher API.
337     Contributed by Jack Lloyd and Fortanix Inc.
338   * Add the Wi-SUN Field Area Network (FAN) device extended key usage.
339   * Add the oid certificate policy x509 extension.
340   * It is now possible to perform RSA PKCS v1.5 signatures with RIPEMD-160 digest.
341     Contributed by Jack Lloyd and Fortanix Inc.
342   * Extend the MBEDTLS_SSL_EXPORT_KEYS to export the handshake randbytes,
343     and the used tls-prf.
344   * Add public API for tls-prf function, according to requested enum.
345   * Add support for parsing otherName entries in the Subject Alternative Name
346     X.509 certificate extension, specifically type hardware module name,
347     as defined in RFC 4108 section 5.
348   * Add support for parsing certificate policies extension, as defined in
349     RFC 5280 section 4.2.1.4. Currently, only the "Any Policy" policy is
350     supported.
351   * List all SAN types in the subject_alt_names field of the certificate.
352     Resolves #459.
353   * Add support for draft-05 of the Connection ID extension, as specified
354     in https://tools.ietf.org/html/draft-ietf-tls-dtls-connection-id-05.
355     The Connection ID extension allows to keep DTLS connections beyond the
356     lifetime of the underlying transport by adding a connection identifier
357     to the DTLS record header. This identifier can be used to associated an
358     incoming record with the correct connection data even after the peer has
359     changed its IP or port. The feature is enabled at compile-time by setting
360     MBEDTLS_SSL_DTLS_CONNECTION_ID (disabled by default), and at run-time
361     through the new APIs mbedtls_ssl_conf_cid() and mbedtls_ssl_set_cid().
362
363
364API Changes
365   * Extend the MBEDTLS_SSL_EXPORT_KEYS to export the handshake randbytes,
366     and the used tls-prf.
367   * Add public API for tls-prf function, according to requested enum.
368
369Bugfix
370   * Fix private key DER output in the key_app_writer example. File contents
371     were shifted by one byte, creating an invalid ASN.1 tag. Fixed by
372     Christian Walther in #2239.
373   * Fix potential memory leak in X.509 self test. Found and fixed by
374     Junhwan Park, #2106.
375   * Reduce stack usage of hkdf tests. Fixes #2195.
376   * Fix 1-byte buffer overflow in mbedtls_mpi_write_string() when
377     used with negative inputs. Found by Guido Vranken in #2404. Credit to
378     OSS-Fuzz.
379   * Fix bugs in the AEAD test suite which would be exposed by ciphers which
380     either used both encrypt and decrypt key schedules, or which perform padding.
381     GCM and CCM were not affected. Fixed by Jack Lloyd.
382   * Fix incorrect default port number in ssl_mail_client example's usage.
383     Found and fixed by irwir. #2337
384   * Add psa_util.h to test/cpp_dummy_build to fix build_default_make_gcc_and_cxx.
385     Fixed by Peter Kolbus (Garmin). #2579
386   * Add missing parentheses around parameters in the definition of the
387     public macro MBEDTLS_X509_ID_FLAG. This could lead to invalid evaluation
388     in case operators binding less strongly than subtraction were used
389     for the parameter.
390   * Add a check for MBEDTLS_X509_CRL_PARSE_C in ssl_server2, guarding the crl
391     sni entry parameter. Reported by inestlerode in #560.
392   * Set the next sequence of the subject_alt_name to NULL when deleting
393     sequence on failure. Found and fix suggested by Philippe Antoine.
394     Credit to OSS-Fuzz.
395
396Changes
397   * Server's RSA certificate in certs.c was SHA-1 signed. In the default
398     mbedTLS configuration only SHA-2 signed certificates are accepted.
399     This certificate is used in the demo server programs, which lead the
400     client programs to fail at the peer's certificate verification
401     due to an unacceptable hash signature. The certificate has been
402     updated to one that is SHA-256 signed. Fix contributed by
403     Illya Gerasymchuk.
404   * Return from various debugging routines immediately if the
405     provided SSL context is unset.
406   * Remove dead code from bignum.c in the default configuration.
407     Found by Coverity, reported and fixed by Peter Kolbus (Garmin). Fixes #2309.
408   * Add test for minimal value of MBEDTLS_MPI_WINDOW_SIZE to all.sh.
409     Contributed by Peter Kolbus (Garmin).
410   * Change wording in the `mbedtls_ssl_conf_max_frag_len()`'s documentation to
411     improve clarity. Fixes #2258.
412
413= mbed TLS 2.17.0 branch released 2019-03-19
414
415Features
416   * Add a new X.509 API call `mbedtls_x509_parse_der_nocopy()`
417     which allows copy-less parsing of DER encoded X.509 CRTs,
418     at the cost of additional lifetime constraints on the input
419     buffer, but at the benefit of reduced RAM consumption.
420   * Add a new function mbedtls_asn1_write_named_bitstring() to write ASN.1
421     named bitstring in DER as required by RFC 5280 Appendix B.
422   * Add MBEDTLS_REMOVE_3DES_CIPHERSUITES to allow removing 3DES ciphersuites
423     from the default list (enabled by default). See
424     https://sweet32.info/SWEET32_CCS16.pdf.
425
426API Changes
427   * Add a new X.509 API call `mbedtls_x509_parse_der_nocopy()`.
428     See the Features section for more information.
429   * Allow to opt in to the removal the API mbedtls_ssl_get_peer_cert()
430     for the benefit of saving RAM, by disabling the new compile-time
431     option MBEDTLS_SSL_KEEP_PEER_CERTIFICATE (enabled by default for
432     API stability). Disabling this option makes mbedtls_ssl_get_peer_cert()
433     always return NULL, and removes the peer_cert field from the
434     mbedtls_ssl_session structure which otherwise stores the peer's
435     certificate.
436
437Security
438   * Make mbedtls_ecdh_get_params return an error if the second key
439     belongs to a different group from the first. Before, if an application
440     passed keys that belonged to different group, the first key's data was
441     interpreted according to the second group, which could lead to either
442     an error or a meaningless output from mbedtls_ecdh_get_params. In the
443     latter case, this could expose at most 5 bits of the private key.
444
445Bugfix
446   * Fix a compilation issue with mbedtls_ecp_restart_ctx not being defined
447     when MBEDTLS_ECP_ALT is defined. Reported by jwhui. Fixes #2242.
448   * Run the AD too long test only if MBEDTLS_CCM_ALT is not defined.
449     Raised as a comment in #1996.
450   * Reduce the stack consumption of mbedtls_mpi_fill_random() which could
451     previously lead to a stack overflow on constrained targets.
452   * Add `MBEDTLS_SELF_TEST` for the mbedtls_self_test functions
453     in the header files, which missed the precompilation check. #971
454   * Fix returning the value 1 when mbedtls_ecdsa_genkey failed.
455   * Remove a duplicate #include in a sample program. Fixed by Masashi Honma #2326.
456   * Remove the mbedtls namespacing from the header file, to fix a "file not found"
457     build error. Fixed by Haijun Gu #2319.
458   * Fix signed-to-unsigned integer conversion warning
459     in X.509 module. Fixes #2212.
460   * Reduce stack usage of `mpi_write_hlp()` by eliminating recursion.
461     Fixes #2190.
462   * Fix false failure in all.sh when backup files exist in include/mbedtls
463     (e.g. config.h.bak). Fixed by Peter Kolbus (Garmin) #2407.
464   * Ensure that unused bits are zero when writing ASN.1 bitstrings when using
465     mbedtls_asn1_write_bitstring().
466   * Fix issue when writing the named bitstrings in KeyUsage and NsCertType
467     extensions in CSRs and CRTs that caused these bitstrings to not be encoded
468     correctly as trailing zeroes were not accounted for as unused bits in the
469     leading content octet. Fixes #1610.
470
471Changes
472   * Reduce RAM consumption during session renegotiation by not storing
473     the peer CRT chain and session ticket twice.
474   * Include configuration file in all header files that use configuration,
475     instead of relying on other header files that they include.
476     Inserted as an enhancement for #1371
477   * Add support for alternative CSR headers, as used by Microsoft and defined
478     in RFC 7468. Found by Michael Ernst. Fixes #767.
479   * Correct many misspellings. Fixed by MisterDA #2371.
480   * Provide an abstraction of vsnprintf to allow alternative implementations
481     for platforms that don't provide it. Based on contributions by Joris Aerts
482     and Nathaniel Wesley Filardo.
483   * Fix clobber list in MIPS assembly for large integer multiplication.
484     Previously, this could lead to functionally incorrect assembly being
485     produced by some optimizing compilers, showing up as failures in
486     e.g. RSA or ECC signature operations. Reported in #1722, fix suggested
487     by Aurelien Jarno and submitted by Jeffrey Martin.
488   * Reduce the complexity of the timing tests. They were assuming more than the
489     underlying OS actually guarantees.
490   * Fix configuration queries in ssl-opt.h. #2030
491   * Ensure that ssl-opt.h can be run in OS X. #2029
492   * Re-enable certain interoperability tests in ssl-opt.sh which had previously
493     been disabled for lack of a sufficiently recent version of GnuTLS on the CI.
494   * Ciphersuites based on 3DES now have the lowest priority by default when
495     they are enabled.
496
497= mbed TLS 2.16.0 branch released 2018-12-21
498
499Features
500   * Add a new config.h option of MBEDTLS_CHECK_PARAMS that enables validation
501     of parameters in the API. This allows detection of obvious misuses of the
502     API, such as passing NULL pointers. The API of existing functions hasn't
503     changed, but requirements on parameters have been made more explicit in
504     the documentation. See the corresponding API documentation for each
505     function to see for which parameter values it is defined. This feature is
506     disabled by default. See its API documentation in config.h for additional
507     steps you have to take when enabling it.
508
509API Changes
510   * The following functions in the random generator modules have been
511     deprecated and replaced as shown below. The new functions change
512     the return type from void to int to allow returning error codes when
513     using MBEDTLS_<MODULE>_ALT for the underlying AES or message digest
514     primitive. Fixes #1798.
515     mbedtls_ctr_drbg_update() -> mbedtls_ctr_drbg_update_ret()
516     mbedtls_hmac_drbg_update() -> mbedtls_hmac_drbg_update_ret()
517   * Extend ECDH interface to enable alternative implementations.
518   * Deprecate error codes of the form MBEDTLS_ERR_xxx_INVALID_KEY_LENGTH for
519     ARIA, CAMELLIA and Blowfish. These error codes will be replaced by
520     the more generic per-module error codes MBEDTLS_ERR_xxx_BAD_INPUT_DATA.
521   * Additional parameter validation checks have been added for the following
522     modules - AES, ARIA, Blowfish, CAMELLIA, CCM, GCM, DHM, ECP, ECDSA, ECDH,
523     ECJPAKE, SHA, Chacha20 and Poly1305, cipher, pk, RSA, and MPI.
524     Where modules have had parameter validation added, existing parameter
525     checks may have changed. Some modules, such as Chacha20 had existing
526     parameter validation whereas other modules had little. This has now been
527     changed so that the same level of validation is present in all modules, and
528     that it is now optional with the MBEDTLS_CHECK_PARAMS flag which by default
529     is off. That means that checks which were previously present by default
530     will no longer be.
531
532New deprecations
533   * Deprecate mbedtls_ctr_drbg_update and mbedtls_hmac_drbg_update
534     in favor of functions that can return an error code.
535
536Bugfix
537   * Fix for Clang, which was reporting a warning for the bignum.c inline
538     assembly for AMD64 targets creating string literals greater than those
539     permitted by the ISO C99 standard. Found by Aaron Jones. Fixes #482.
540   * Fix runtime error in `mbedtls_platform_entropy_poll()` when run
541     through qemu user emulation. Reported and fix suggested by randombit
542     in #1212. Fixes #1212.
543   * Fix an unsafe bounds check when restoring an SSL session from a ticket.
544     This could lead to a buffer overflow, but only in case ticket authentication
545     was broken. Reported and fix suggested by Guido Vranken in #659.
546   * Add explicit integer to enumeration type casts to example program
547     programs/pkey/gen_key which previously led to compilation failure
548     on some toolchains. Reported by phoenixmcallister. Fixes #2170.
549   * Fix double initialization of ECC hardware that made some accelerators
550     hang.
551   * Clarify documentation of mbedtls_ssl_set_own_cert() regarding the absence
552     of check for certificate/key matching. Reported by Attila Molnar, #507.
553
554 = mbed TLS 2.15.1 branch released 2018-11-30
555
556 Changes
557    * Update the Mbed Crypto submodule to version 0.1.0b2.
558
559 = mbed TLS 2.15.0 branch released 2018-11-23
560
561 Features
562    * Add an experimental build option, USE_CRYPTO_SUBMODULE, to enable use of
563      Mbed Crypto as the source of the cryptography implementation.
564    * Add an experimental configuration option, MBEDTLS_PSA_CRYPTO_C, to enable
565      the PSA Crypto API from Mbed Crypto when additionally used with the
566      USE_CRYPTO_SUBMODULE build option.
567
568 Changes
569    * Add unit tests for AES-GCM when called through mbedtls_cipher_auth_xxx()
570      from the cipher abstraction layer. Fixes #2198.
571
572= mbed TLS 2.14.1 branch released 2018-11-30
573
574Security
575   * Fix timing variations and memory access variations in RSA PKCS#1 v1.5
576     decryption that could lead to a Bleichenbacher-style padding oracle
577     attack. In TLS, this affects servers that accept ciphersuites based on
578     RSA decryption (i.e. ciphersuites whose name contains RSA but not
579     (EC)DH(E)). Discovered by Eyal Ronen (Weizmann Institute),  Robert Gillham
580     (University of Adelaide), Daniel Genkin (University of Michigan),
581     Adi Shamir (Weizmann Institute), David Wong (NCC Group), and Yuval Yarom
582     (University of Adelaide, Data61). The attack is described in more detail
583     in the paper available here: http://cat.eyalro.net/cat.pdf  CVE-2018-19608
584   * In mbedtls_mpi_write_binary(), don't leak the exact size of the number
585     via branching and memory access patterns. An attacker who could submit
586     a plaintext for RSA PKCS#1 v1.5 decryption but only observe the timing
587     of the decryption and not its result could nonetheless decrypt RSA
588     plaintexts and forge RSA signatures. Other asymmetric algorithms may
589     have been similarly vulnerable. Reported by Eyal Ronen, Robert Gillham,
590     Daniel Genkin, Adi Shamir, David Wong and Yuval Yarom.
591   * Wipe sensitive buffers on the stack in the CTR_DRBG and HMAC_DRBG
592     modules.
593
594API Changes
595   * The new functions mbedtls_ctr_drbg_update_ret() and
596     mbedtls_hmac_drbg_update_ret() are similar to mbedtls_ctr_drbg_update()
597     and mbedtls_hmac_drbg_update() respectively, but the new functions
598     report errors whereas the old functions return void. We recommend that
599     applications use the new functions.
600
601= mbed TLS 2.14.0 branch released 2018-11-19
602
603Security
604   * Fix overly strict DN comparison when looking for CRLs belonging to a
605     particular CA. This previously led to ignoring CRLs when the CRL's issuer
606     name and the CA's subject name differed in their string encoding (e.g.,
607     one using PrintableString and the other UTF8String) or in the choice of
608     upper and lower case. Reported by Henrik Andersson of Bosch GmbH in issue
609     #1784.
610   * Fix a flawed bounds check in server PSK hint parsing. In case the
611     incoming message buffer was placed within the first 64KiB of address
612     space and a PSK-(EC)DHE ciphersuite was used, this allowed an attacker
613     to trigger a memory access up to 64KiB beyond the incoming message buffer,
614     potentially leading to an application crash or information disclosure.
615   * Fix mbedtls_mpi_is_prime() to use more rounds of probabilistic testing. The
616     previous settings for the number of rounds made it practical for an
617     adversary to construct non-primes that would be erroneously accepted as
618     primes with high probability. This does not have an impact on the
619     security of TLS, but can matter in other contexts with numbers chosen
620     potentially by an adversary that should be prime and can be validated.
621     For example, the number of rounds was enough to securely generate RSA key
622     pairs or Diffie-Hellman parameters, but was insufficient to validate
623     Diffie-Hellman parameters properly.
624     See "Prime and Prejudice" by by Martin R. Albrecht and Jake Massimo and
625     Kenneth G. Paterson and Juraj Somorovsky.
626
627Features
628   * Add support for temporarily suspending expensive ECC computations after
629     some configurable amount of operations. This is intended to be used in
630     constrained, single-threaded systems where ECC is time consuming and can
631     block other operations until they complete. This is disabled by default,
632     but can be enabled by MBEDTLS_ECP_RESTARTABLE at compile time and
633     configured by mbedtls_ecp_set_max_ops() at runtime. It applies to the new
634     xxx_restartable functions in ECP, ECDSA, PK and X.509 (CRL not supported
635     yet), and to existing functions in ECDH and SSL (currently only
636     implemented client-side, for ECDHE-ECDSA ciphersuites in TLS 1.2,
637     including client authentication).
638   * Add support for Arm CPU DSP extensions to accelerate asymmetric key
639     operations. On CPUs where the extensions are available, they can accelerate
640     MPI multiplications used in ECC and RSA cryptography. Contributed by
641     Aurelien Jarno.
642   * Extend RSASSA-PSS signature to allow a smaller salt size. Previously, PSS
643     signature always used a salt with the same length as the hash, and returned
644     an error if this was not possible. Now the salt size may be up to two bytes
645     shorter. This allows the library to support all hash and signature sizes
646     that comply with FIPS 186-4, including SHA-512 with a 1024-bit key.
647   * Add support for 128-bit keys in CTR_DRBG. Note that using keys shorter
648     than 256 bits limits the security of generated material to 128 bits.
649
650API Changes
651   * Add a common error code of `MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED` for
652     a feature that is not supported by underlying alternative
653     implementations implementing cryptographic primitives. This is useful for
654     hardware accelerators that don't implement all options or features.
655
656New deprecations
657   * All module specific errors following the form
658     MBEDTLS_ERR_XXX_FEATURE_UNAVAILABLE that indicate a feature is not
659     supported are deprecated and are now replaced by the new equivalent
660     platform error.
661   * All module specific generic hardware acceleration errors following the
662     form MBEDTLS_ERR_XXX_HW_ACCEL_FAILED that are deprecated and are replaced
663     by the equivalent plaform error.
664   * Deprecate the function mbedtls_mpi_is_prime() in favor of
665     mbedtls_mpi_is_prime_ext() which allows specifying the number of
666     Miller-Rabin rounds.
667
668Bugfix
669   * Fix wrong order of freeing in programs/ssl/ssl_server2 example
670     application leading to a memory leak in case both
671     MBEDTLS_MEMORY_BUFFER_ALLOC_C and MBEDTLS_MEMORY_BACKTRACE are set.
672     Fixes #2069.
673   * Fix a bug in the update function for SSL ticket keys which previously
674     invalidated keys of a lifetime of less than a 1s. Fixes #1968.
675   * Fix failure in hmac_drbg in the benchmark sample application, when
676     MBEDTLS_THREADING_C is defined. Found by TrinityTonic, #1095
677   * Fix a bug in the record decryption routine ssl_decrypt_buf()
678     which lead to accepting properly authenticated but improperly
679     padded records in case of CBC ciphersuites using Encrypt-then-MAC.
680   * Fix memory leak and freeing without initialization in the example
681     program programs/x509/cert_write. Fixes #1422.
682   * Ignore IV in mbedtls_cipher_set_iv() when the cipher mode is
683     MBEDTLS_MODE_ECB. Found by ezdevelop. Fixes #1091.
684   * Zeroize memory used for buffering or reassembling handshake messages
685     after use.
686   * Use `mbedtls_platform_zeroize()` instead of `memset()` for zeroization
687     of sensitive data in the example programs aescrypt2 and crypt_and_hash.
688   * Change the default string format used for various X.509 DN attributes to
689     UTF8String. Previously, the use of the PrintableString format led to
690     wildcards and non-ASCII characters being unusable in some DN attributes.
691     Reported by raprepo in #1860 and by kevinpt in #468. Fix contributed by
692     Thomas-Dee.
693   * Fix compilation failure for configurations which use compile time
694     replacements of standard calloc/free functions through the macros
695     MBEDTLS_PLATFORM_CALLOC_MACRO and MBEDTLS_PLATFORM_FREE_MACRO.
696     Reported by ole-de and ddhome2006. Fixes #882, #1642 and #1706.
697
698Changes
699   * Removed support for Yotta as a build tool.
700   * Add tests for session resumption in DTLS.
701   * Close a test gap in (D)TLS between the client side and the server side:
702     test the handling of large packets and small packets on the client side
703     in the same way as on the server side.
704   * Change the dtls_client and dtls_server samples to work by default over
705     IPv6 and optionally by a build option over IPv4.
706   * Change the use of Windows threading to use Microsoft Visual C++ runtime
707     calls, rather than Win32 API calls directly. This is necessary to avoid
708     conflict with C runtime usage. Found and fixed by irwir.
709   * Remember the string format of X.509 DN attributes when replicating
710     X.509 DNs. Previously, DN attributes were always written in their default
711     string format (mostly PrintableString), which could lead to CRTs being
712     created which used PrintableStrings in the issuer field even though the
713     signing CA used UTF8Strings in its subject field; while X.509 compliant,
714     such CRTs were rejected in some applications, e.g. some versions of
715     Firefox, curl and GnuTLS. Reported in #1033 by Moschn. Fix contributed by
716     Thomas-Dee.
717   * Improve documentation of mbedtls_ssl_get_verify_result().
718     Fixes #517 reported by github-monoculture.
719   * Add MBEDTLS_MPI_GEN_PRIME_FLAG_LOW_ERR flag to mbedtls_mpi_gen_prime() and
720     use it to reduce error probability in RSA key generation to levels mandated
721     by FIPS-186-4.
722
723= mbed TLS 2.13.1 branch released 2018-09-06
724
725API Changes
726   * Extend the platform module with an abstraction mbedtls_platform_gmtime_r()
727     whose implementation should behave as a thread-safe version of gmtime().
728     This allows users to configure such an implementation at compile time when
729     the target system cannot be deduced automatically, by setting the option
730     MBEDTLS_PLATFORM_GMTIME_R_ALT. At this stage Mbed TLS is only able to
731     automatically select implementations for Windows and POSIX C libraries.
732
733Bugfix
734   * Fix build failures on platforms where only gmtime() is available but
735     neither gmtime_r() nor gmtime_s() are present. Fixes #1907.
736
737= mbed TLS 2.13.0 branch released 2018-08-31
738
739Security
740   * Fix an issue in the X.509 module which could lead to a buffer overread
741     during certificate extensions parsing. In case of receiving malformed
742     input (extensions length field equal to 0), an illegal read of one byte
743     beyond the input buffer is made. Found and analyzed by Nathan Crandall.
744
745Features
746   * Add support for fragmentation of outgoing DTLS handshake messages. This
747     is controlled by the maximum fragment length as set locally or negotiated
748     with the peer, as well as by a new per-connection MTU option, set using
749     mbedtls_ssl_set_mtu().
750   * Add support for auto-adjustment of MTU to a safe value during the
751     handshake when flights do not get through (RFC 6347, section 4.1.1.1,
752     last paragraph).
753   * Add support for packing multiple records within a single datagram,
754     enabled by default.
755   * Add support for buffering out-of-order handshake messages in DTLS.
756     The maximum amount of RAM used for this can be controlled by the
757     compile-time constant MBEDTLS_SSL_DTLS_MAX_BUFFERING defined
758     in mbedtls/config.h.
759
760API Changes
761   * Add function mbedtls_ssl_set_datagram_packing() to configure
762     the use of datagram packing (enabled by default).
763
764Bugfix
765   * Fix a potential memory leak in mbedtls_ssl_setup() function. An allocation
766     failure in the function could lead to other buffers being leaked.
767   * Fixes an issue with MBEDTLS_CHACHAPOLY_C which would not compile if
768     MBEDTLS_ARC4_C and MBEDTLS_CIPHER_NULL_CIPHER weren't also defined. #1890
769   * Fix a memory leak in ecp_mul_comb() if ecp_precompute_comb() fails.
770     Fix contributed by Espressif Systems.
771   * Add ecc extensions only if an ecc based ciphersuite is used.
772     This improves compliance to RFC 4492, and as a result, solves
773     interoperability issues with BouncyCastle. Raised by milenamil in #1157.
774   * Replace printf with mbedtls_printf in the ARIA module. Found by
775     TrinityTonic in #1908.
776   * Fix potential use-after-free in mbedtls_ssl_get_max_frag_len()
777     and mbedtls_ssl_get_record_expansion() after a session reset. Fixes #1941.
778   * Fix a bug that caused SSL/TLS clients to incorrectly abort the handshake
779     with TLS versions 1.1 and earlier when the server requested authentication
780     without providing a list of CAs. This was due to an overly strict bounds
781     check in parsing the CertificateRequest message,
782     introduced in Mbed TLS 2.12.0. Fixes #1954.
783   * Fix a miscalculation of the maximum record expansion in
784     mbedtls_ssl_get_record_expansion() in case of ChachaPoly ciphersuites,
785     or CBC ciphersuites in (D)TLS versions 1.1 or higher. Fixes #1913, #1914.
786   * Fix undefined shifts with negative values in certificates parsing
787     (found by Catena cyber using oss-fuzz)
788   * Fix memory leak and free without initialization in pk_encrypt
789     and pk_decrypt example programs. Reported by Brace Stout. Fixes #1128.
790   * Remove redundant else statement. Raised by irwir. Fixes #1776.
791
792Changes
793   * Copy headers preserving timestamps when doing a "make install".
794     Contributed by xueruini.
795   * Allow the forward declaration of public structs. Contributed by Dawid
796     Drozd. Fixes #1215 raised by randombit.
797   * Improve compatibility with some alternative CCM implementations by using
798     CCM test vectors from RAM.
799   * Add support for buffering of out-of-order handshake messages.
800   * Add warnings to the documentation of the HKDF module to reduce the risk
801     of misusing the mbedtls_hkdf_extract() and mbedtls_hkdf_expand()
802     functions. Fixes #1775. Reported by Brian J. Murray.
803
804= mbed TLS 2.12.0 branch released 2018-07-25
805
806Security
807   * Fix a vulnerability in TLS ciphersuites based on CBC and using SHA-384,
808     in (D)TLS 1.0 to 1.2, that allowed an active network attacker to
809     partially recover the plaintext of messages under some conditions by
810     exploiting timing measurements. With DTLS, the attacker could perform
811     this recovery by sending many messages in the same connection. With TLS
812     or if mbedtls_ssl_conf_dtls_badmac_limit() was used, the attack only
813     worked if the same secret (for example a HTTP Cookie) has been repeatedly
814     sent over connections manipulated by the attacker. Connections using GCM
815     or CCM instead of CBC, using hash sizes other than SHA-384, or using
816     Encrypt-then-Mac (RFC 7366) were not affected. The vulnerability was
817     caused by a miscalculation (for SHA-384) in a countermeasure to the
818     original Lucky 13 attack. Found by Kenny Paterson, Eyal Ronen and Adi
819     Shamir.
820   * Fix a vulnerability in TLS ciphersuites based on CBC, in (D)TLS 1.0 to
821     1.2, that allowed a local attacker, able to execute code on the local
822     machine as well as manipulate network packets, to partially recover the
823     plaintext of messages under some conditions by using a cache attack
824     targeting an internal MD/SHA buffer. With TLS or if
825     mbedtls_ssl_conf_dtls_badmac_limit() was used, the attack only worked if
826     the same secret (for example a HTTP Cookie) has been repeatedly sent over
827     connections manipulated by the attacker. Connections using GCM or CCM
828     instead of CBC or using Encrypt-then-Mac (RFC 7366) were not affected.
829     Found by Kenny Paterson, Eyal Ronen and Adi Shamir.
830   * Add a counter-measure against a vulnerability in TLS ciphersuites based
831     on CBC, in (D)TLS 1.0 to 1.2, that allowed a local attacker, able to
832     execute code on the local machine as well as manipulate network packets,
833     to partially recover the plaintext of messages under some conditions (see
834     previous entry) by using a cache attack targeting the SSL input record
835     buffer. Connections using GCM or CCM instead of CBC or using
836     Encrypt-then-Mac (RFC 7366) were not affected. Found by Kenny Paterson,
837     Eyal Ronen and Adi Shamir.
838
839Features
840   * Add new crypto primitives from RFC 7539: stream cipher Chacha20, one-time
841     authenticator Poly1305 and AEAD construct Chacha20-Poly1305. Contributed
842     by Daniel King.
843   * Add support for CHACHA20-POLY1305 ciphersuites from RFC 7905.
844   * Add platform support for the Haiku OS. (https://www.haiku-os.org).
845     Contributed by Augustin Cavalier.
846   * Make the receive and transmit buffers independent sizes, for situations
847     where the outgoing buffer can be fixed at a smaller size than the incoming
848     buffer, which can save some RAM. If buffer lengths are kept equal, there
849     is no functional difference. Contributed by Angus Gratton, and also
850     independently contributed again by Paul Sokolovsky.
851   * Add support for key wrapping modes based on AES as defined by
852     NIST SP 800-38F algorithms KW and KWP and by RFC 3394 and RFC 5649.
853
854Bugfix
855   * Fix the key_app_writer example which was writing a leading zero byte which
856     was creating an invalid ASN.1 tag. Found by Aryeh R. Fixes #1257.
857   * Fix compilation error on C++, because of a variable named new.
858     Found and fixed by Hirotaka Niisato in #1783.
859   * Fix "no symbols" warning issued by ranlib when building on Mac OS X. Fix
860     contributed by tabascoeye.
861   * Clarify documentation for mbedtls_ssl_write() to include 0 as a valid
862     return value. Found by @davidwu2000. #839
863   * Fix a memory leak in mbedtls_x509_csr_parse(), found by catenacyber,
864     Philippe Antoine. Fixes #1623.
865   * Remove unused headers included in x509.c. Found by Chris Hanson and fixed
866     by Brendan Shanks. Part of a fix for #992.
867   * Fix compilation error when MBEDTLS_ARC4_C is disabled and
868     MBEDTLS_CIPHER_NULL_CIPHER is enabled. Found by TrinityTonic in #1719.
869   * Added length checks to some TLS parsing functions. Found and fixed by
870     Philippe Antoine from Catena cyber. #1663.
871   * Fix the inline assembly for the MPI multiply helper function for i386 and
872     i386 with SSE2. Found by László Langó. Fixes #1550
873   * Fix namespacing in header files. Remove the `mbedtls` namespacing in
874     the `#include` in the header files. Resolves #857
875   * Fix compiler warning of 'use before initialisation' in
876     mbedtls_pk_parse_key(). Found by Martin Boye Petersen and fixed by Dawid
877     Drozd. #1098
878   * Fix decryption for zero length messages (which contain all padding) when a
879     CBC based ciphersuite is used together with Encrypt-then-MAC. Previously,
880     such a message was wrongly reported as an invalid record and therefore lead
881     to the connection being terminated. Seen most often with OpenSSL using
882     TLS 1.0. Reported by @kFYatek and by Conor Murphy on the forum. Fix
883     contributed by Espressif Systems. Fixes #1632
884   * Fix ssl_client2 example to send application data with 0-length content
885     when the request_size argument is set to 0 as stated in the documentation.
886     Fixes #1833.
887   * Correct the documentation for `mbedtls_ssl_get_session()`. This API has
888     deep copy of the session, and the peer certificate is not lost. Fixes #926.
889   * Fix build using -std=c99. Fixed by Nick Wilson.
890
891Changes
892   * Fail when receiving a TLS alert message with an invalid length, or invalid
893     zero-length messages when using TLS 1.2. Contributed by Espressif Systems.
894   * Change the default behaviour of mbedtls_hkdf_extract() to return an error
895     when calling with a NULL salt and non-zero salt_len. Contributed by
896     Brian J Murray
897   * Change the shebang line in Perl scripts to look up perl in the PATH.
898     Contributed by fbrosson.
899   * Allow overriding the time on Windows via the platform-time abstraction.
900     Fixed by Nick Wilson.
901   * Use gmtime_r/gmtime_s for thread-safety. Fixed by Nick Wilson.
902
903= mbed TLS 2.11.0 branch released 2018-06-18
904
905Features
906   * Add additional block mode, OFB (Output Feedback), to the AES module and
907     cipher abstraction module.
908   * Implement the HMAC-based extract-and-expand key derivation function
909     (HKDF) per RFC 5869. Contributed by Thomas Fossati.
910   * Add support for the CCM* block cipher mode as defined in IEEE Std. 802.15.4.
911   * Add support for the XTS block cipher mode with AES (AES-XTS).
912     Contributed by Aorimn in pull request #414.
913   * In TLS servers, support offloading private key operations to an external
914     cryptoprocessor. Private key operations can be asynchronous to allow
915     non-blocking operation of the TLS server stack.
916
917Bugfix
918   * Fix the cert_write example to handle certificates signed with elliptic
919     curves as well as RSA. Fixes #777 found by dbedev.
920   * Fix for redefinition of _WIN32_WINNT to avoid overriding a definition
921     used by user applications. Found and fixed by Fabio Alessandrelli.
922   * Fix compilation warnings with IAR toolchain, on 32 bit platform.
923     Reported by rahmanih in #683
924   * Fix braces in mbedtls_memory_buffer_alloc_status(). Found by sbranden, #552.
925
926Changes
927   * Changed CMake defaults for IAR to treat all compiler warnings as errors.
928   * Changed the Clang parameters used in the CMake build files to work for
929     versions later than 3.6. Versions of Clang earlier than this may no longer
930     work. Fixes #1072
931
932= mbed TLS 2.10.0 branch released 2018-06-06
933
934Features
935   * Add support for ARIA cipher (RFC 5794) and associated TLS ciphersuites
936     (RFC 6209). Disabled by default, see MBEDTLS_ARIA_C in config.h
937
938API Changes
939   * Extend the platform module with a util component that contains
940     functionality shared by multiple Mbed TLS modules. At this stage
941     platform_util.h (and its associated platform_util.c) only contain
942     mbedtls_platform_zeroize(), which is a critical function from a security
943     point of view. mbedtls_platform_zeroize() needs to be regularly tested
944     against compilers to ensure that calls to it are not removed from the
945     output binary as part of redundant code elimination optimizations.
946     Therefore, mbedtls_platform_zeroize() is moved to the platform module to
947     facilitate testing and maintenance.
948
949Bugfix
950   * Fix an issue with MicroBlaze support in bn_mul.h which was causing the
951     build to fail. Found by zv-io. Fixes #1651.
952
953Changes
954   * Support TLS testing in out-of-source builds using cmake. Fixes #1193.
955   * Fix redundant declaration of mbedtls_ssl_list_ciphersuites. Raised by
956     TrinityTonic. #1359.
957
958= mbed TLS 2.9.0 branch released 2018-04-30
959
960Security
961   * Fix an issue in the X.509 module which could lead to a buffer overread
962     during certificate validation. Additionally, the issue could also lead to
963     unnecessary callback checks being made or to some validation checks to be
964     omitted. The overread could be triggered remotely, while the other issues
965     would require a non DER-compliant certificate to be correctly signed by a
966     trusted CA, or a trusted CA with a non DER-compliant certificate. Found by
967     luocm. Fixes #825.
968   * Fix the buffer length assertion in the ssl_parse_certificate_request()
969     function which led to an arbitrary overread of the message buffer. The
970     overreads could be caused by receiving a malformed message at the point
971     where an optional signature algorithms list is expected when the signature
972     algorithms section is too short. In builds with debug output, the overread
973     data is output with the debug data.
974   * Fix a client-side bug in the validation of the server's ciphersuite choice
975     which could potentially lead to the client accepting a ciphersuite it didn't
976     offer or a ciphersuite that cannot be used with the TLS or DTLS version
977     chosen by the server. This could lead to corruption of internal data
978     structures for some configurations.
979
980Features
981   * Add an option, MBEDTLS_AES_FEWER_TABLES, to dynamically compute smaller AES
982     tables during runtime, thereby reducing the RAM/ROM footprint by ~6KiB.
983     Suggested and contributed by jkivilin in pull request #394.
984   * Add initial support for Curve448 (RFC 7748). Only mbedtls_ecp_mul() and
985     ECDH primitive functions (mbedtls_ecdh_gen_public(),
986     mbedtls_ecdh_compute_shared()) are supported for now. Contributed by
987     Nicholas Wilson in pull request #348.
988
989API Changes
990   * Extend the public API with the function of mbedtls_net_poll() to allow user
991     applications to wait for a network context to become ready before reading
992     or writing.
993   * Add function mbedtls_ssl_check_pending() to the public API to allow
994     a check for whether more more data is pending to be processed in the
995     internal message buffers.
996     This function is necessary to determine when it is safe to idle on the
997     underlying transport in case event-driven IO is used.
998
999Bugfix
1000   * Fix a spurious uninitialized variable warning in cmac.c. Fix independently
1001     contributed by Brian J Murray and David Brown.
1002   * Add missing dependencies in test suites that led to build failures
1003     in configurations that omit certain hashes or public-key algorithms.
1004     Fixes #1040.
1005   * Fix C89 incompatibility in benchmark.c. Contributed by Brendan Shanks.
1006     #1353
1007   * Add missing dependencies for MBEDTLS_HAVE_TIME_DATE and
1008     MBEDTLS_VERSION_FEATURES in some test suites. Contributed by
1009     Deomid Ryabkov. Fixes #1299, #1475.
1010   * Fix the Makefile build process for building shared libraries on Mac OS X.
1011     Fixed by mnacamura.
1012   * Fix parsing of PKCS#8 encoded Elliptic Curve keys. Previously Mbed TLS was
1013     unable to parse keys which had only the optional parameters field of the
1014     ECPrivateKey structure. Found by Jethro Beekman, fixed in #1379.
1015   * Return the plaintext data more quickly on unpadded CBC decryption, as
1016     stated in the mbedtls_cipher_update() documentation. Contributed by
1017     Andy Leiserson.
1018   * Fix overriding and ignoring return values when parsing and writing to
1019     a file in pk_sign program. Found by kevlut in #1142.
1020   * Restrict usage of error code MBEDTLS_ERR_SSL_WANT_READ to situations
1021     where data needs to be fetched from the underlying transport in order
1022     to make progress. Previously, this error code was also occasionally
1023     returned when unexpected messages were being discarded, ignoring that
1024     further messages could potentially already be pending to be processed
1025     in the internal buffers; these cases led to deadlocks when event-driven
1026     I/O was used. Found and reported by Hubert Mis in #772.
1027   * Fix buffer length assertions in the ssl_parse_certificate_request()
1028     function which leads to a potential one byte overread of the message
1029     buffer.
1030   * Fix invalid buffer sizes passed to zlib during record compression and
1031     decompression.
1032   * Fix the soversion of libmbedcrypto to match the soversion of the
1033     maintained 2.7 branch. The soversion was increased in Mbed TLS
1034     version 2.7.1 to reflect breaking changes in that release, but the
1035     increment was missed in 2.8.0 and later releases outside of the 2.7 branch.
1036
1037Changes
1038   * Remove some redundant code in bignum.c. Contributed by Alexey Skalozub.
1039   * Support cmake builds where Mbed TLS is a subproject. Fix contributed
1040     independently by Matthieu Volat and Arne Schwabe.
1041   * Improve testing in configurations that omit certain hashes or
1042     public-key algorithms. Includes contributions by Gert van Dijk.
1043   * Improve negative testing of X.509 parsing.
1044   * Do not define global mutexes around readdir() and gmtime() in
1045     configurations where the feature is disabled. Found and fixed by Gergely
1046     Budai.
1047   * Harden the function mbedtls_ssl_config_free() against misuse, so that it
1048     doesn't leak memory if the user doesn't use mbedtls_ssl_conf_psk() and
1049     instead incorrectly manipulates the configuration structure directly.
1050     Found and fix submitted by junyeonLEE in #1220.
1051   * Provide an empty implementation of mbedtls_pkcs5_pbes2() when
1052     MBEDTLS_ASN1_PARSE_C is not enabled. This allows the use of PBKDF2
1053     without PBES2. Fixed by Marcos Del Sol Vives.
1054   * Add the order of the base point as N in the mbedtls_ecp_group structure
1055     for Curve25519 (other curves had it already). Contributed by Nicholas
1056     Wilson #481
1057   * Improve the documentation of mbedtls_net_accept(). Contributed by Ivan
1058     Krylov.
1059   * Improve the documentation of mbedtls_ssl_write(). Suggested by
1060     Paul Sokolovsky in #1356.
1061   * Add an option in the Makefile to support ar utilities where the operation
1062     letter must not be prefixed by '-', such as LLVM. Found and fixed by
1063     Alex Hixon.
1064   * Allow configuring the shared library extension by setting the DLEXT
1065     environment variable when using the project makefiles.
1066   * Optimize unnecessary zeroing in mbedtls_mpi_copy. Based on a contribution
1067     by Alexey Skalozub in #405.
1068   * In the SSL module, when f_send, f_recv or f_recv_timeout report
1069     transmitting more than the required length, return an error. Raised by
1070     Sam O'Connor in #1245.
1071   * Improve robustness of mbedtls_ssl_derive_keys against the use of
1072     HMAC functions with non-HMAC ciphersuites. Independently contributed
1073     by Jiayuan Chen in #1377. Fixes #1437.
1074   * Improve security of RSA key generation by including criteria from
1075     FIPS 186-4. Contributed by Jethro Beekman. #1380
1076   * Declare functions in header files even when an alternative implementation
1077     of the corresponding module is activated by defining the corresponding
1078     MBEDTLS_XXX_ALT macro. This means that alternative implementations do
1079     not need to copy the declarations, and ensures that they will have the
1080     same API.
1081   * Add platform setup and teardown calls in test suites.
1082
1083= mbed TLS 2.8.0 branch released 2018-03-16
1084
1085Default behavior changes
1086   * The truncated HMAC extension now conforms to RFC 6066. This means
1087     that when both sides of a TLS connection negotiate the truncated
1088     HMAC extension, Mbed TLS can now interoperate with other
1089     compliant implementations, but this breaks interoperability with
1090     prior versions of Mbed TLS. To restore the old behavior, enable
1091     the (deprecated) option MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT in
1092     config.h. Found by Andreas Walz (ivESK, Offenburg University of
1093     Applied Sciences).
1094
1095Security
1096   * Fix implementation of the truncated HMAC extension. The previous
1097     implementation allowed an offline 2^80 brute force attack on the
1098     HMAC key of a single, uninterrupted connection (with no
1099     resumption of the session).
1100   * Verify results of RSA private key operations to defend
1101     against Bellcore glitch attack.
1102   * Fix a buffer overread in ssl_parse_server_key_exchange() that could cause
1103     a crash on invalid input.
1104   * Fix a buffer overread in ssl_parse_server_psk_hint() that could cause a
1105     crash on invalid input.
1106   * Fix CRL parsing to reject CRLs containing unsupported critical
1107     extensions. Found by Falko Strenzke and Evangelos Karatsiolis.
1108
1109Features
1110   * Extend PKCS#8 interface by introducing support for the entire SHA
1111     algorithms family when encrypting private keys using PKCS#5 v2.0.
1112     This allows reading encrypted PEM files produced by software that
1113     uses PBKDF2-SHA2, such as OpenSSL 1.1. Submitted by Antonio Quartulli,
1114     OpenVPN Inc. Fixes #1339
1115   * Add support for public keys encoded in PKCS#1 format. #1122
1116
1117New deprecations
1118   * Deprecate support for record compression (configuration option
1119     MBEDTLS_ZLIB_SUPPORT).
1120
1121Bugfix
1122   * Fix the name of a DHE parameter that was accidentally changed in 2.7.0.
1123     Fixes #1358.
1124   * Fix test_suite_pk to work on 64-bit ILP32 systems. #849
1125   * Fix mbedtls_x509_crt_profile_suiteb, which used to reject all certificates
1126     with flag MBEDTLS_X509_BADCERT_BAD_PK even when the key type was correct.
1127     In the context of SSL, this resulted in handshake failure. Reported by
1128     daniel in the Mbed TLS forum. #1351
1129   * Fix Windows x64 builds with the included mbedTLS.sln file. #1347
1130   * Fix setting version TLSv1 as minimal version, even if TLS 1
1131     is not enabled. Set MBEDTLS_SSL_MIN_MAJOR_VERSION
1132     and MBEDTLS_SSL_MIN_MINOR_VERSION instead of
1133     MBEDTLS_SSL_MAJOR_VERSION_3 and MBEDTLS_SSL_MINOR_VERSION_1. #664
1134   * Fix compilation error on Mingw32 when _TRUNCATE is defined. Use _TRUNCATE
1135     only if __MINGW32__ not defined. Fix suggested by Thomas Glanzmann and
1136     Nick Wilson on issue #355
1137   * In test_suite_pk, pass valid parameters when testing for hash length
1138     overflow. #1179
1139   * Fix memory allocation corner cases in memory_buffer_alloc.c module. Found
1140     by Guido Vranken. #639
1141   * Log correct number of ciphersuites used in Client Hello message. #918
1142   * Fix X509 CRT parsing that would potentially accept an invalid tag when
1143     parsing the subject alternative names.
1144   * Fix a possible arithmetic overflow in ssl_parse_server_key_exchange()
1145     that could cause a key exchange to fail on valid data.
1146   * Fix a possible arithmetic overflow in ssl_parse_server_psk_hint() that
1147     could cause a key exchange to fail on valid data.
1148   * Don't define mbedtls_aes_decrypt and mbedtls_aes_encrypt under
1149     MBEDTLS_DEPRECATED_REMOVED. #1388
1150   * Fix a 1-byte heap buffer overflow (read-only) during private key parsing.
1151     Found through fuzz testing.
1152
1153Changes
1154   * Fix tag lengths and value ranges in the documentation of CCM encryption.
1155     Contributed by Mathieu Briand.
1156   * Fix typo in a comment ctr_drbg.c. Contributed by Paul Sokolovsky.
1157   * Remove support for the library reference configuration for picocoin.
1158   * MD functions deprecated in 2.7.0 are no longer inline, to provide
1159     a migration path for those depending on the library's ABI.
1160   * Clarify the documentation of mbedtls_ssl_setup.
1161   * Use (void) when defining functions with no parameters. Contributed by
1162     Joris Aerts. #678
1163
1164= mbed TLS 2.7.0 branch released 2018-02-03
1165
1166Security
1167   * Fix a heap corruption issue in the implementation of the truncated HMAC
1168     extension. When the truncated HMAC extension is enabled and CBC is used,
1169     sending a malicious application packet could be used to selectively corrupt
1170     6 bytes on the peer's heap, which could potentially lead to crash or remote
1171     code execution. The issue could be triggered remotely from either side in
1172     both TLS and DTLS. CVE-2018-0488
1173   * Fix a buffer overflow in RSA-PSS verification when the hash was too large
1174     for the key size, which could potentially lead to crash or remote code
1175     execution. Found by Seth Terashima, Qualcomm Product Security Initiative,
1176     Qualcomm Technologies Inc. CVE-2018-0487
1177   * Fix buffer overflow in RSA-PSS verification when the unmasked data is all
1178     zeros.
1179   * Fix an unsafe bounds check in ssl_parse_client_psk_identity() when adding
1180     64 KiB to the address of the SSL buffer and causing a wrap around.
1181   * Fix a potential heap buffer overflow in mbedtls_ssl_write(). When the (by
1182     default enabled) maximum fragment length extension is disabled in the
1183     config and the application data buffer passed to mbedtls_ssl_write
1184     is larger than the internal message buffer (16384 bytes by default), the
1185     latter overflows. The exploitability of this issue depends on whether the
1186     application layer can be forced into sending such large packets. The issue
1187     was independently reported by Tim Nordell via e-mail and by Florin Petriuc
1188     and sjorsdewit on GitHub. Fix proposed by Florin Petriuc in #1022.
1189     Fixes #707.
1190   * Add a provision to prevent compiler optimizations breaking the time
1191     constancy of mbedtls_ssl_safer_memcmp().
1192   * Ensure that buffers are cleared after use if they contain sensitive data.
1193     Changes were introduced in multiple places in the library.
1194   * Set PEM buffer to zero before freeing it, to avoid decoded private keys
1195     being leaked to memory after release.
1196   * Fix dhm_check_range() failing to detect trivial subgroups and potentially
1197     leaking 1 bit of the private key. Reported by prashantkspatil.
1198   * Make mbedtls_mpi_read_binary() constant-time with respect to the input
1199     data. Previously, trailing zero bytes were detected and omitted for the
1200     sake of saving memory, but potentially leading to slight timing
1201     differences. Reported by Marco Macchetti, Kudelski Group.
1202   * Wipe stack buffer temporarily holding EC private exponent
1203     after keypair generation.
1204   * Fix a potential heap buffer over-read in ALPN extension parsing
1205     (server-side). Could result in application crash, but only if an ALPN
1206     name larger than 16 bytes had been configured on the server.
1207   * Change default choice of DHE parameters from untrustworthy RFC 5114
1208     to RFC 3526 containing parameters generated in a nothing-up-my-sleeve
1209     manner.
1210
1211Features
1212   * Allow comments in test data files.
1213   * The selftest program can execute a subset of the tests based on command
1214     line arguments.
1215   * New unit tests for timing. Improve the self-test to be more robust
1216     when run on a heavily-loaded machine.
1217   * Add alternative implementation support for CCM and CMAC (MBEDTLS_CCM_ALT,
1218     MBEDTLS_CMAC_ALT). Submitted by Steven Cooreman, Silicon Labs.
1219   * Add support for alternative implementations of GCM, selected by the
1220     configuration flag MBEDTLS_GCM_ALT.
1221   * Add support for alternative implementations for ECDSA, controlled by new
1222     configuration flags MBEDTLS_ECDSA_SIGN_ALT, MBEDTLS_ECDSA_VERIFY_ALT and
1223     MBEDTLS_ECDSDA_GENKEY_AT in config.h.
1224     The following functions from the ECDSA module can be replaced
1225     with alternative implementation:
1226     mbedtls_ecdsa_sign(), mbedtls_ecdsa_verify() and mbedtls_ecdsa_genkey().
1227   * Add support for alternative implementation of ECDH, controlled by the
1228     new configuration flags MBEDTLS_ECDH_COMPUTE_SHARED_ALT and
1229     MBEDTLS_ECDH_GEN_PUBLIC_ALT in config.h.
1230     The following functions from the ECDH module can be replaced
1231     with an alternative implementation:
1232     mbedtls_ecdh_gen_public() and mbedtls_ecdh_compute_shared().
1233   * Add support for alternative implementation of ECJPAKE, controlled by
1234     the new configuration flag MBEDTLS_ECJPAKE_ALT.
1235   * Add mechanism to provide alternative implementation of the DHM module.
1236
1237API Changes
1238   * Extend RSA interface by multiple functions allowing structure-
1239     independent setup and export of RSA contexts. Most notably,
1240     mbedtls_rsa_import() and mbedtls_rsa_complete() are introduced for setting
1241     up RSA contexts from partial key material and having them completed to the
1242     needs of the implementation automatically. This allows to setup private RSA
1243     contexts from keys consisting of N,D,E only, even if P,Q are needed for the
1244     purpose or CRT and/or blinding.
1245   * The configuration option MBEDTLS_RSA_ALT can be used to define alternative
1246     implementations of the RSA interface declared in rsa.h.
1247   * The following functions in the message digest modules (MD2, MD4, MD5,
1248     SHA1, SHA256, SHA512) have been deprecated and replaced as shown below.
1249     The new functions change the return type from void to int to allow
1250     returning error codes when using MBEDTLS_<MODULE>_ALT.
1251     mbedtls_<MODULE>_starts() -> mbedtls_<MODULE>_starts_ret()
1252     mbedtls_<MODULE>_update() -> mbedtls_<MODULE>_update_ret()
1253     mbedtls_<MODULE>_finish() -> mbedtls_<MODULE>_finish_ret()
1254     mbedtls_<MODULE>_process() -> mbedtls_internal_<MODULE>_process()
1255
1256New deprecations
1257   * Deprecate usage of RSA primitives with non-matching key-type
1258     (e.g. signing with a public key).
1259   * Direct manipulation of structure fields of RSA contexts is deprecated.
1260     Users are advised to use the extended RSA API instead.
1261   * Deprecate usage of message digest functions that return void
1262     (mbedtls_<MODULE>_starts, mbedtls_<MODULE>_update,
1263     mbedtls_<MODULE>_finish and mbedtls_<MODULE>_process where <MODULE> is
1264     any of MD2, MD4, MD5, SHA1, SHA256, SHA512) in favor of functions
1265     that can return an error code.
1266   * Deprecate untrustworthy DHE parameters from RFC 5114. Superseded by
1267     parameters from RFC 3526 or the newly added parameters from RFC 7919.
1268   * Deprecate hex string DHE constants MBEDTLS_DHM_RFC3526_MODP_2048_P etc.
1269     Supserseded by binary encoded constants MBEDTLS_DHM_RFC3526_MODP_2048_P_BIN
1270     etc.
1271   * Deprecate mbedtls_ssl_conf_dh_param() for setting default DHE parameters
1272     from hex strings. Superseded by mbedtls_ssl_conf_dh_param_bin()
1273     accepting DHM parameters in binary form, matching the new constants.
1274
1275Bugfix
1276   * Fix ssl_parse_record_header() to silently discard invalid DTLS records
1277     as recommended in RFC 6347 Section 4.1.2.7.
1278   * Fix memory leak in mbedtls_ssl_set_hostname() when called multiple times.
1279     Found by projectgus and Jethro Beekman, #836.
1280   * Fix usage help in ssl_server2 example. Found and fixed by Bei Lin.
1281   * Parse signature algorithm extension when renegotiating. Previously,
1282     renegotiated handshakes would only accept signatures using SHA-1
1283     regardless of the peer's preferences, or fail if SHA-1 was disabled.
1284   * Fix leap year calculation in x509_date_is_valid() to ensure that invalid
1285     dates on leap years with 100 and 400 intervals are handled correctly. Found
1286     by Nicholas Wilson. #694
1287   * Fix some invalid RSA-PSS signatures with keys of size 8N+1 that were
1288     accepted. Generating these signatures required the private key.
1289   * Fix out-of-memory problem when parsing 4096-bit PKCS8-encrypted RSA keys.
1290     Found independently by Florian in the mbed TLS forum and by Mishamax.
1291     #878, #1019.
1292   * Fix variable used before assignment compilation warnings with IAR
1293     toolchain. Found by gkerrien38.
1294   * Fix unchecked return codes from AES, DES and 3DES functions in
1295     pem_aes_decrypt(), pem_des_decrypt() and pem_des3_decrypt() respectively.
1296     If a call to one of the functions of the cryptographic primitive modules
1297     failed, the error may not be noticed by the function
1298     mbedtls_pem_read_buffer() causing it to return invalid values. Found by
1299     Guido Vranken. #756
1300   * Include configuration file in md.h, to fix compilation warnings.
1301     Reported by aaronmdjones in #1001
1302   * Correct extraction of signature-type from PK instance in X.509 CRT and CSR
1303     writing routines that prevented these functions to work with alternative
1304     RSA implementations. Raised by J.B. in the Mbed TLS forum. Fixes #1011.
1305   * Don't print X.509 version tag for v1 CRT's, and omit extensions for
1306     non-v3 CRT's.
1307   * Fix bugs in RSA test suite under MBEDTLS_NO_PLATFORM_ENTROPY. #1023 #1024
1308   * Fix net_would_block() to avoid modification by errno through fcntl() call.
1309     Found by nkolban. Fixes #845.
1310   * Fix handling of handshake messages in mbedtls_ssl_read() in case
1311     MBEDTLS_SSL_RENEGOTIATION is disabled. Found by erja-gp.
1312   * Add a check for invalid private parameters in mbedtls_ecdsa_sign().
1313     Reported by Yolan Romailler.
1314   * Fix word size check in in pk.c to not depend on MBEDTLS_HAVE_INT64.
1315   * Fix incorrect unit in benchmark output. #850
1316   * Add size-checks for record and handshake message content, securing
1317     fragile yet non-exploitable code-paths.
1318   * Fix crash when calling mbedtls_ssl_cache_free() twice. Found by
1319     MilenkoMitrovic, #1104
1320   * Fix mbedtls_timing_alarm(0) on Unix and MinGW.
1321   * Fix use of uninitialized memory in mbedtls_timing_get_timer() when reset=1.
1322   * Fix possible memory leaks in mbedtls_gcm_self_test().
1323   * Added missing return code checks in mbedtls_aes_self_test().
1324   * Fix issues in RSA key generation program programs/x509/rsa_genkey and the
1325     RSA test suite where the failure of CTR DRBG initialization lead to
1326     freeing an RSA context and several MPI's without proper initialization
1327     beforehand.
1328   * Fix error message in programs/pkey/gen_key.c. Found and fixed by Chris Xue.
1329   * Fix programs/pkey/dh_server.c so that it actually works with dh_client.c.
1330     Found and fixed by Martijn de Milliano.
1331   * Fix an issue in the cipher decryption with the mode
1332     MBEDTLS_PADDING_ONE_AND_ZEROS that sometimes accepted invalid padding.
1333     Note, this padding mode is not used by the TLS protocol. Found and fixed by
1334     Micha Kraus.
1335   * Fix the entropy.c module to not call mbedtls_sha256_starts() or
1336     mbedtls_sha512_starts() in the mbedtls_entropy_init() function.
1337   * Fix the entropy.c module to ensure that mbedtls_sha256_init() or
1338     mbedtls_sha512_init() is called before operating on the relevant context
1339     structure. Do not assume that zeroizing a context is a correct way to
1340     reset it. Found independently by ccli8 on Github.
1341   * In mbedtls_entropy_free(), properly free the message digest context.
1342   * Fix status handshake status message in programs/ssl/dtls_client.c. Found
1343     and fixed by muddog.
1344
1345Changes
1346   * Extend cert_write example program by options to set the certificate version
1347     and the message digest. Further, allow enabling/disabling of authority
1348     identifier, subject identifier and basic constraints extensions.
1349   * Only check for necessary RSA structure fields in `mbedtls_rsa_private`. In
1350     particular, don't require P,Q if neither CRT nor blinding are
1351     used. Reported and fix proposed independently by satur9nine and sliai
1352     on GitHub.
1353   * Only run AES-192 self-test if AES-192 is available. Fixes #963.
1354   * Tighten the RSA PKCS#1 v1.5 signature verification code and remove the
1355     undeclared dependency of the RSA module on the ASN.1 module.
1356   * Update all internal usage of deprecated message digest functions to the
1357     new ones with return codes. In particular, this modifies the
1358     mbedtls_md_info_t structure. Propagate errors from these functions
1359     everywhere except some locations in the ssl_tls.c module.
1360   * Improve CTR_DRBG error handling by propagating underlying AES errors.
1361   * Add MBEDTLS_ERR_XXX_HW_ACCEL_FAILED error codes for all cryptography
1362     modules where the software implementation can be replaced by a hardware
1363     implementation.
1364   * Add explicit warnings for the use of MD2, MD4, MD5, SHA-1, DES and ARC4
1365     throughout the library.
1366
1367= mbed TLS 2.6.0 branch released 2017-08-10
1368
1369Security
1370   * Fix authentication bypass in SSL/TLS: when authmode is set to optional,
1371     mbedtls_ssl_get_verify_result() would incorrectly return 0 when the peer's
1372     X.509 certificate chain had more than MBEDTLS_X509_MAX_INTERMEDIATE_CA
1373     (default: 8) intermediates, even when it was not trusted. This could be
1374     triggered remotely from either side. (With authmode set to 'required'
1375     (the default), the handshake was correctly aborted).
1376   * Reliably wipe sensitive data after use in the AES example applications
1377     programs/aes/aescrypt2 and programs/aes/crypt_and_hash.
1378     Found by Laurent Simon.
1379
1380Features
1381   * Add the functions mbedtls_platform_setup() and mbedtls_platform_teardown()
1382     and the context struct mbedtls_platform_context to perform
1383     platform-specific setup and teardown operations. The macro
1384     MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT allows the functions to be overridden
1385     by the user in a platform_alt.h file. These new functions are required in
1386     some embedded environments to provide a means of initialising underlying
1387     cryptographic acceleration hardware.
1388
1389API Changes
1390   * Reverted API/ABI breaking changes introduced in mbed TLS 2.5.1, to make the
1391     API consistent with mbed TLS 2.5.0. Specifically removed the inline
1392     qualifier from the functions mbedtls_aes_decrypt, mbedtls_aes_encrypt,
1393     mbedtls_ssl_ciphersuite_uses_ec and mbedtls_ssl_ciphersuite_uses_psk. Found
1394     by James Cowgill. #978
1395   * Certificate verification functions now set flags to -1 in case the full
1396     chain was not verified due to an internal error (including in the verify
1397     callback) or chain length limitations.
1398   * With authmode set to optional, the TLS handshake is now aborted if the
1399     verification of the peer's certificate failed due to an overlong chain or
1400     a fatal error in the verify callback.
1401
1402Bugfix
1403   * Add a check if iv_len is zero in GCM, and return an error if it is zero.
1404     Reported by roberto. #716
1405   * Replace preprocessor condition from #if defined(MBEDTLS_THREADING_PTHREAD)
1406     to #if defined(MBEDTLS_THREADING_C) as the library cannot assume they will
1407     always be implemented by pthread support. #696
1408   * Fix a resource leak on Windows platforms in mbedtls_x509_crt_parse_path(),
1409     in the case of an error. Found by redplait. #590
1410   * Add MBEDTLS_MPI_CHK to check for error value of mbedtls_mpi_fill_random.
1411     Reported and fix suggested by guidovranken. #740
1412   * Fix conditional preprocessor directives in bignum.h to enable 64-bit
1413     compilation when using ARM Compiler 6.
1414   * Fix a potential integer overflow in the version verification for DER
1415     encoded X.509 CRLs. The overflow could enable maliciously constructed CRLs
1416     to bypass the version verification check. Found by Peng Li/Yueh-Hsun Lin,
1417     KNOX Security, Samsung Research America
1418   * Fix potential integer overflow in the version verification for DER
1419     encoded X.509 CSRs. The overflow could enable maliciously constructed CSRs
1420     to bypass the version verification check. Found by Peng Li/Yueh-Hsun Lin,
1421     KNOX Security, Samsung Research America
1422   * Fix a potential integer overflow in the version verification for DER
1423     encoded X.509 certificates. The overflow could enable maliciously
1424     constructed certificates to bypass the certificate verification check.
1425   * Fix a call to the libc function time() to call the platform abstraction
1426     function mbedtls_time() instead. Found by wairua. #666
1427   * Avoid shadowing of time and index functions through mbed TLS function
1428     arguments. Found by inestlerode. #557.
1429
1430Changes
1431   * Added config.h option MBEDTLS_NO_UDBL_DIVISION, to prevent the use of
1432     64-bit division. This is useful on embedded platforms where 64-bit division
1433     created a dependency on external libraries. #708
1434   * Removed mutexes from ECP hardware accelerator code. Now all hardware
1435     accelerator code in the library leaves concurrency handling to the
1436     platform. Reported by Steven Cooreman. #863
1437   * Define the macro MBEDTLS_AES_ROM_TABLES in the configuration file
1438     config-no-entropy.h to reduce the RAM footprint.
1439   * Added a test script that can be hooked into git that verifies commits
1440     before they are pushed.
1441   * Improve documentation of PKCS1 decryption functions.
1442
1443= mbed TLS 2.5.1 released 2017-06-21
1444
1445Security
1446   * Fixed unlimited overread of heap-based buffer in mbedtls_ssl_read().
1447     The issue could only happen client-side with renegotiation enabled.
1448     Could result in DoS (application crash) or information leak
1449     (if the application layer sent data read from mbedtls_ssl_read()
1450     back to the server or to a third party). Can be triggered remotely.
1451   * Removed SHA-1 and RIPEMD-160 from the default hash algorithms for
1452     certificate verification. SHA-1 can be turned back on with a compile-time
1453     option if needed.
1454   * Fixed offset in FALLBACK_SCSV parsing that caused TLS server to fail to
1455     detect it sometimes. Reported by Hugo Leisink. #810
1456   * Tighten parsing of RSA PKCS#1 v1.5 signatures, to avoid a
1457     potential Bleichenbacher/BERserk-style attack.
1458
1459Bugfix
1460   * Remove size zero arrays from ECJPAKE test suite. Size zero arrays are not
1461     valid C and they prevented the test from compiling in Visual Studio 2015
1462     and with GCC using the -Wpedantic compilation option.
1463   * Fix insufficient support for signature-hash-algorithm extension,
1464     resulting in compatibility problems with Chrome. Found by hfloyrd. #823
1465   * Fix behaviour that hid the original cause of fatal alerts in some cases
1466     when sending the alert failed. The fix makes sure not to hide the error
1467     that triggered the alert.
1468   * Fix SSLv3 renegotiation behaviour and stop processing data received from
1469     peer after sending a fatal alert to refuse a renegotiation attempt.
1470     Previous behaviour was to keep processing data even after the alert has
1471     been sent.
1472   * Accept empty trusted CA chain in authentication mode
1473     MBEDTLS_SSL_VERIFY_OPTIONAL. Found by Jethro Beekman. #864
1474   * Fix implementation of mbedtls_ssl_parse_certificate() to not annihilate
1475     fatal errors in authentication mode MBEDTLS_SSL_VERIFY_OPTIONAL and to
1476     reflect bad EC curves within verification result.
1477   * Fix bug that caused the modular inversion function to accept the invalid
1478     modulus 1 and therefore to hang. Found by blaufish. #641.
1479   * Fix incorrect sign computation in modular exponentiation when the base is
1480     a negative MPI. Previously the result was always negative. Found by Guido
1481     Vranken.
1482   * Fix a numerical underflow leading to stack overflow in mpi_read_file()
1483     that was triggered uppon reading an empty line. Found by Guido Vranken.
1484
1485Changes
1486   * Send fatal alerts in more cases. The previous behaviour was to skip
1487     sending the fatal alert and just drop the connection.
1488   * Clarify ECDSA documentation and improve the sample code to avoid
1489     misunderstanding and potentially dangerous use of the API. Pointed out
1490     by Jean-Philippe Aumasson.
1491
1492= mbed TLS 2.5.0 branch released 2017-05-17
1493
1494Security
1495   * Wipe stack buffers in RSA private key operations
1496     (rsa_rsaes_pkcs1_v15_decrypt(), rsa_rsaes_oaep_decrypt). Found by Laurent
1497     Simon.
1498   * Add exponent blinding to RSA private operations as a countermeasure
1499     against side-channel attacks like the cache attack described in
1500     https://arxiv.org/abs/1702.08719v2.
1501     Found and fix proposed by Michael Schwarz, Samuel Weiser, Daniel Gruss,
1502     Clémentine Maurice and Stefan Mangard.
1503
1504Features
1505   * Add hardware acceleration support for the Elliptic Curve Point module.
1506     This involved exposing parts of the internal interface to enable
1507     replacing the core functions and adding and alternative, module level
1508     replacement support for enabling the extension of the interface.
1509   * Add a new configuration option to 'mbedtls_ssl_config' to enable
1510     suppressing the CA list in Certificate Request messages. The default
1511     behaviour has not changed, namely every configured CAs name is included.
1512
1513API Changes
1514   * The following functions in the AES module have been deprecated and replaced
1515     by the functions shown below. The new functions change the return type from
1516     void to int to allow returning error codes when using MBEDTLS_AES_ALT,
1517     MBEDTLS_AES_DECRYPT_ALT or MBEDTLS_AES_ENCRYPT_ALT.
1518     mbedtls_aes_decrypt() -> mbedtls_internal_aes_decrypt()
1519     mbedtls_aes_encrypt() -> mbedtls_internal_aes_encrypt()
1520
1521Bugfix
1522   * Remove macros from compat-1.3.h that correspond to deleted items from most
1523     recent versions of the library. Found by Kyle Keen.
1524   * Fixed issue in the Threading module that prevented mutexes from
1525     initialising. Found by sznaider. #667 #843
1526   * Add checks in the PK module for the RSA functions on 64-bit systems.
1527     The PK and RSA modules use different types for passing hash length and
1528     without these checks the type cast could lead to data loss. Found by Guido
1529     Vranken.
1530
1531= mbed TLS 2.4.2 branch released 2017-03-08
1532
1533Security
1534   * Add checks to prevent signature forgeries for very large messages while
1535     using RSA through the PK module in 64-bit systems. The issue was caused by
1536     some data loss when casting a size_t to an unsigned int value in the
1537     functions rsa_verify_wrap(), rsa_sign_wrap(), rsa_alt_sign_wrap() and
1538     mbedtls_pk_sign(). Found by Jean-Philippe Aumasson.
1539   * Fixed potential livelock during the parsing of a CRL in PEM format in
1540     mbedtls_x509_crl_parse(). A string containing a CRL followed by trailing
1541     characters after the footer could result in the execution of an infinite
1542     loop. The issue can be triggered remotely. Found by Greg Zaverucha,
1543     Microsoft.
1544   * Removed MD5 from the allowed hash algorithms for CertificateRequest and
1545     CertificateVerify messages, to prevent SLOTH attacks against TLS 1.2.
1546     Introduced by interoperability fix for #513.
1547   * Fixed a bug that caused freeing a buffer that was allocated on the stack,
1548     when verifying the validity of a key on secp224k1. This could be
1549     triggered remotely for example with a maliciously constructed certificate
1550     and potentially could lead to remote code execution on some platforms.
1551     Reported independently by rongsaws and Aleksandar Nikolic, Cisco Talos
1552     team. #569 CVE-2017-2784
1553
1554Bugfix
1555   * Fix output certificate verification flags set by x509_crt_verify_top() when
1556     traversing a chain of trusted CA. The issue would cause both flags,
1557     MBEDTLS_X509_BADCERT_NOT_TRUSTED and MBEDTLS_X509_BADCERT_EXPIRED, to be
1558     set when the verification conditions are not met regardless of the cause.
1559     Found by Harm Verhagen and inestlerode. #665 #561
1560   * Fix the redefinition of macro ssl_set_bio to an undefined symbol
1561     mbedtls_ssl_set_bio_timeout in compat-1.3.h, by removing it.
1562     Found by omlib-lin. #673
1563   * Fix unused variable/function compilation warnings in pem.c, x509_crt.c and
1564     x509_csr.c that are reported when building mbed TLS with a config.h that
1565     does not define MBEDTLS_PEM_PARSE_C. Found by omnium21. #562
1566   * Fix incorrect renegotiation condition in ssl_check_ctr_renegotiate() that
1567     would compare 64 bits of the record counter instead of 48 bits as indicated
1568     in RFC 6347 Section 4.3.1. This could cause the execution of the
1569     renegotiation routines at unexpected times when the protocol is DTLS. Found
1570     by wariua. #687
1571   * Fixed multiple buffer overreads in mbedtls_pem_read_buffer() when parsing
1572     the input string in PEM format to extract the different components. Found
1573     by Eyal Itkin.
1574   * Fixed potential arithmetic overflow in mbedtls_ctr_drbg_reseed() that could
1575     cause buffer bound checks to be bypassed. Found by Eyal Itkin.
1576   * Fixed potential arithmetic overflows in mbedtls_cipher_update() that could
1577     cause buffer bound checks to be bypassed. Found by Eyal Itkin.
1578   * Fixed potential arithmetic overflow in mbedtls_md2_update() that could
1579     cause buffer bound checks to be bypassed. Found by Eyal Itkin.
1580   * Fixed potential arithmetic overflow in mbedtls_base64_decode() that could
1581     cause buffer bound checks to be bypassed. Found by Eyal Itkin.
1582   * Fixed heap overreads in mbedtls_x509_get_time(). Found by Peng
1583     Li/Yueh-Hsun Lin, KNOX Security, Samsung Research America.
1584   * Fix potential memory leak in mbedtls_x509_crl_parse(). The leak was caused
1585     by missing calls to mbedtls_pem_free() in cases when a
1586     MBEDTLS_ERR_PEM_NO_HEADER_FOOTER_PRESENT error was encountered. Found and
1587     fix proposed by Guido Vranken. #722
1588   * Fixed the templates used to generate project and solution files for Visual
1589     Studio 2015 as well as the files themselves, to remove a build warning
1590     generated in Visual Studio 2015. Reported by Steve Valliere. #742
1591   * Fix a resource leak in ssl_cookie, when using MBEDTLS_THREADING_C.
1592     Raised and fix suggested by Alan Gillingham in the mbed TLS forum. #771
1593   * Fix 1 byte buffer overflow in mbedtls_mpi_write_string() when the MPI
1594     number to write in hexadecimal is negative and requires an odd number of
1595     digits. Found and fixed by Guido Vranken.
1596   * Fix unlisted DES configuration dependency in some pkparse test cases. Found
1597     by inestlerode. #555
1598
1599= mbed TLS 2.4.1 branch released 2016-12-13
1600
1601Changes
1602   * Update to CMAC test data, taken from - NIST Special Publication 800-38B -
1603     Recommendation for Block Cipher Modes of Operation: The CMAC Mode for
1604     Authentication – October  2016
1605
1606= mbed TLS 2.4.0 branch released 2016-10-17
1607
1608Security
1609   * Removed the MBEDTLS_SSL_AEAD_RANDOM_IV option, because it was not compliant
1610     with RFC-5116 and could lead to session key recovery in very long TLS
1611     sessions. "Nonce-Disrespecting Adversaries Practical Forgery Attacks on GCM in
1612     TLS" - H. Bock, A. Zauner, S. Devlin, J. Somorovsky, P. Jovanovic.
1613     https://eprint.iacr.org/2016/475.pdf
1614   * Fixed potential stack corruption in mbedtls_x509write_crt_der() and
1615     mbedtls_x509write_csr_der() when the signature is copied to the buffer
1616     without checking whether there is enough space in the destination. The
1617     issue cannot be triggered remotely. Found by Jethro Beekman.
1618
1619Features
1620   * Added support for CMAC for AES and 3DES and AES-CMAC-PRF-128, as defined by
1621     NIST SP 800-38B, RFC-4493 and RFC-4615.
1622   * Added hardware entropy selftest to verify that the hardware entropy source
1623     is functioning correctly.
1624   * Added a script to print build environment info for diagnostic use in test
1625     scripts, which is also now called by all.sh.
1626   * Added the macro MBEDTLS_X509_MAX_FILE_PATH_LEN that enables the user to
1627     configure the maximum length of a file path that can be buffered when
1628     calling mbedtls_x509_crt_parse_path().
1629   * Added a configuration file config-no-entropy.h that configures the subset of
1630     library features that do not require an entropy source.
1631   * Added the macro MBEDTLS_ENTROPY_MIN_HARDWARE in config.h. This allows users
1632     to configure the minimum number of bytes for entropy sources using the
1633     mbedtls_hardware_poll() function.
1634
1635Bugfix
1636   * Fix for platform time abstraction to avoid dependency issues where a build
1637     may need time but not the standard C library abstraction, and added
1638     configuration consistency checks to check_config.h
1639   * Fix dependency issue in Makefile to allow parallel builds.
1640   * Fix incorrect handling of block lengths in crypt_and_hash.c sample program,
1641     when GCM is used. Found by udf2457. #441
1642   * Fix for key exchanges based on ECDH-RSA or ECDH-ECDSA which weren't
1643     enabled unless others were also present. Found by David Fernandez. #428
1644   * Fix for out-of-tree builds using CMake. Found by jwurzer, and fix based on
1645     a contribution from Tobias Tangemann. #541
1646   * Fixed cert_app.c sample program for debug output and for use when no root
1647     certificates are provided.
1648   * Fix conditional statement that would cause a 1 byte overread in
1649     mbedtls_asn1_get_int(). Found and fixed by Guido Vranken. #599
1650   * Fixed pthread implementation to avoid unintended double initialisations
1651     and double frees. Found by Niklas Amnebratt.
1652   * Fixed the sample applications gen_key.c, cert_req.c and cert_write.c for
1653     builds where the configuration MBEDTLS_PEM_WRITE_C is not defined. Found
1654     by inestlerode. #559.
1655   * Fix mbedtls_x509_get_sig() to update the ASN1 type in the mbedtls_x509_buf
1656     data structure until after error checks are successful. Found by
1657     subramanyam-c. #622
1658   * Fix documentation and implementation missmatch for function arguments of
1659     mbedtls_gcm_finish(). Found by cmiatpaar. #602
1660   * Guarantee that P>Q at RSA key generation. Found by inestlerode. #558
1661   * Fix potential byte overread when verifying malformed SERVER_HELLO in
1662     ssl_parse_hello_verify_request() for DTLS. Found by Guido Vranken.
1663   * Fix check for validity of date when parsing in mbedtls_x509_get_time().
1664     Found by subramanyam-c. #626
1665   * Fix compatibility issue with Internet Explorer client authentication,
1666     where the limited hash choices prevented the client from sending its
1667     certificate. Found by teumas. #513
1668   * Fix compilation without MBEDTLS_SELF_TEST enabled.
1669
1670Changes
1671   * Extended test coverage of special cases, and added new timing test suite.
1672   * Removed self-tests from the basic-built-test.sh script, and added all
1673     missing self-tests to the test suites, to ensure self-tests are only
1674     executed once.
1675   * Added support for 3 and 4 byte lengths to mbedtls_asn1_write_len().
1676   * Added support for a Yotta specific configuration file -
1677     through the symbol YOTTA_CFG_MBEDTLS_TARGET_CONFIG_FILE.
1678   * Added optimization for code space for X.509/OID based on configured
1679     features. Contributed by Aviv Palivoda.
1680   * Renamed source file library/net.c to library/net_sockets.c to avoid
1681     naming collision in projects which also have files with the common name
1682     net.c. For consistency, the corresponding header file, net.h, is marked as
1683     deprecated, and its contents moved to net_sockets.h.
1684   * Changed the strategy for X.509 certificate parsing and validation, to no
1685     longer disregard certificates with unrecognised fields.
1686
1687= mbed TLS 2.3.0 branch released 2016-06-28
1688
1689Security
1690   * Fix missing padding length check in mbedtls_rsa_rsaes_pkcs1_v15_decrypt
1691     required by PKCS1 v2.2
1692   * Fix potential integer overflow to buffer overflow in
1693     mbedtls_rsa_rsaes_pkcs1_v15_encrypt and mbedtls_rsa_rsaes_oaep_encrypt
1694     (not triggerable remotely in (D)TLS).
1695   * Fix a potential integer underflow to buffer overread in
1696     mbedtls_rsa_rsaes_oaep_decrypt. It is not triggerable remotely in
1697     SSL/TLS.
1698
1699Features
1700   * Support for platform abstraction of the standard C library time()
1701     function.
1702
1703Bugfix
1704   * Fix bug in mbedtls_mpi_add_mpi() that caused wrong results when the three
1705     arguments where the same (in-place doubling). Found and fixed by Janos
1706     Follath. #309
1707   * Fix potential build failures related to the 'apidoc' target, introduced
1708     in the previous patch release. Found by Robert Scheck. #390 #391
1709   * Fix issue in Makefile that prevented building using armar. #386
1710   * Fix memory leak that occurred only when ECJPAKE was enabled and ECDHE and
1711     ECDSA was disabled in config.h . The leak didn't occur by default.
1712   * Fix an issue that caused valid certificates to be rejected whenever an
1713     expired or not yet valid certificate was parsed before a valid certificate
1714     in the trusted certificate list.
1715   * Fix bug in mbedtls_x509_crt_parse that caused trailing extra data in the
1716     buffer after DER certificates to be included in the raw representation.
1717   * Fix issue that caused a hang when generating RSA keys of odd bitlength
1718   * Fix bug in mbedtls_rsa_rsaes_pkcs1_v15_encrypt that made null pointer
1719     dereference possible.
1720   * Fix issue that caused a crash if invalid curves were passed to
1721     mbedtls_ssl_conf_curves. #373
1722   * Fix issue in ssl_fork_server which was preventing it from functioning. #429
1723   * Fix memory leaks in test framework
1724   * Fix test in ssl-opt.sh that does not run properly with valgrind
1725   * Fix unchecked calls to mmbedtls_md_setup(). Fix by Brian Murray. #502
1726
1727Changes
1728   * On ARM platforms, when compiling with -O0 with GCC, Clang or armcc5,
1729     don't use the optimized assembly for bignum multiplication. This removes
1730     the need to pass -fomit-frame-pointer to avoid a build error with -O0.
1731   * Disabled SSLv3 in the default configuration.
1732   * Optimized mbedtls_mpi_zeroize() for MPI integer size. (Fix by Alexey
1733     Skalozub).
1734   * Fix non-compliance server extension handling. Extensions for SSLv3 are now
1735     ignored, as required by RFC6101.
1736
1737= mbed TLS 2.2.1 released 2016-01-05
1738
1739Security
1740   * Fix potential double free when mbedtls_asn1_store_named_data() fails to
1741     allocate memory. Only used for certificate generation, not triggerable
1742     remotely in SSL/TLS. Found by Rafał Przywara. #367
1743   * Disable MD5 handshake signatures in TLS 1.2 by default to prevent the
1744     SLOTH attack on TLS 1.2 server authentication (other attacks from the
1745     SLOTH paper do not apply to any version of mbed TLS or PolarSSL).
1746     https://www.mitls.org/pages/attacks/SLOTH
1747
1748Bugfix
1749   * Fix over-restrictive length limit in GCM. Found by Andreas-N. #362
1750   * Fix bug in certificate validation that caused valid chains to be rejected
1751     when the first intermediate certificate has pathLenConstraint=0. Found by
1752     Nicholas Wilson. Introduced in mbed TLS 2.2.0. #280
1753   * Removed potential leak in mbedtls_rsa_rsassa_pkcs1_v15_sign(), found by
1754     JayaraghavendranK. #372
1755   * Fix suboptimal handling of unexpected records that caused interop issues
1756     with some peers over unreliable links. Avoid dropping an entire DTLS
1757     datagram if a single record in a datagram is unexpected, instead only
1758     drop the record and look at subsequent records (if any are present) in
1759     the same datagram. Found by jeannotlapin. #345
1760
1761= mbed TLS 2.2.0 released 2015-11-04
1762
1763Security
1764   * Fix potential double free if mbedtls_ssl_conf_psk() is called more than
1765     once and some allocation fails. Cannot be forced remotely. Found by Guido
1766     Vranken, Intelworks.
1767   * Fix potential heap corruption on Windows when
1768     mbedtls_x509_crt_parse_path() is passed a path longer than 2GB. Cannot be
1769     triggered remotely. Found by Guido Vranken, Intelworks.
1770   * Fix potential buffer overflow in some asn1_write_xxx() functions.
1771     Cannot be triggered remotely unless you create X.509 certificates based
1772     on untrusted input or write keys of untrusted origin. Found by Guido
1773     Vranken, Intelworks.
1774   * The X509 max_pathlen constraint was not enforced on intermediate
1775     certificates. Found by Nicholas Wilson, fix and tests provided by
1776     Janos Follath. #280 and #319
1777
1778Features
1779   * Experimental support for EC J-PAKE as defined in Thread 1.0.0.
1780     Disabled by default as the specification might still change.
1781   * Added a key extraction callback to accees the master secret and key
1782     block. (Potential uses include EAP-TLS and Thread.)
1783
1784Bugfix
1785   * Self-signed certificates were not excluded from pathlen counting,
1786     resulting in some valid X.509 being incorrectly rejected. Found and fix
1787     provided by Janos Follath. #319
1788   * Fix build error with configurations where ECDHE-PSK is the only key
1789     exchange. Found and fix provided by Chris Hammond. #270
1790   * Fix build error with configurations where RSA, RSA-PSK, ECDH-RSA or
1791     ECHD-ECDSA if the only key exchange. Multiple reports. #310
1792   * Fixed a bug causing some handshakes to fail due to some non-fatal alerts
1793     not being properly ignored. Found by mancha and Kasom Koht-arsa, #308
1794   * mbedtls_x509_crt_verify(_with_profile)() now also checks the key type and
1795     size/curve against the profile. Before that, there was no way to set a
1796     minimum key size for end-entity certificates with RSA keys. Found by
1797     Matthew Page of Scannex Electronics Ltd.
1798   * Fix failures in MPI on Sparc(64) due to use of bad assembly code.
1799     Found by Kurt Danielson. #292
1800   * Fix typo in name of the extKeyUsage OID. Found by inestlerode, #314
1801   * Fix bug in ASN.1 encoding of booleans that caused generated CA
1802     certificates to be rejected by some applications, including OS X
1803     Keychain. Found and fixed by Jonathan Leroy, Inikup.
1804
1805Changes
1806   * Improved performance of mbedtls_ecp_muladd() when one of the scalars is 1
1807     or -1.
1808
1809= mbed TLS 2.1.2 released 2015-10-06
1810
1811Security
1812   * Added fix for CVE-2015-5291 to prevent heap corruption due to buffer
1813     overflow of the hostname or session ticket. Found by Guido Vranken,
1814     Intelworks.
1815   * Fix potential double-free if mbedtls_ssl_set_hs_psk() is called more than
1816     once in the same handhake and mbedtls_ssl_conf_psk() was used.
1817     Found and patch provided by Guido Vranken, Intelworks. Cannot be forced
1818     remotely.
1819   * Fix stack buffer overflow in pkcs12 decryption (used by
1820     mbedtls_pk_parse_key(file)() when the password is > 129 bytes.
1821     Found by Guido Vranken, Intelworks. Not triggerable remotely.
1822   * Fix potential buffer overflow in mbedtls_mpi_read_string().
1823     Found by Guido Vranken, Intelworks. Not exploitable remotely in the context
1824     of TLS, but might be in other uses. On 32 bit machines, requires reading a
1825     string of close to or larger than 1GB to exploit; on 64 bit machines, would
1826     require reading a string of close to or larger than 2^62 bytes.
1827   * Fix potential random memory allocation in mbedtls_pem_read_buffer()
1828     on crafted PEM input data. Found and fix provided by Guido Vranken,
1829     Intelworks. Not triggerable remotely in TLS. Triggerable remotely if you
1830     accept PEM data from an untrusted source.
1831   * Fix possible heap buffer overflow in base64_encoded() when the input
1832     buffer is 512MB or larger on 32-bit platforms. Found by Guido Vranken,
1833     Intelworks. Not trigerrable remotely in TLS.
1834   * Fix potential double-free if mbedtls_conf_psk() is called repeatedly on
1835     the same mbedtls_ssl_config object and memory allocation fails. Found by
1836     Guido Vranken, Intelworks. Cannot be forced remotely.
1837   * Fix potential heap buffer overflow in servers that perform client
1838     authentication against a crafted CA cert. Cannot be triggered remotely
1839     unless you allow third parties to pick trust CAs for client auth.
1840     Found by Guido Vranken, Intelworks.
1841
1842Bugfix
1843   * Fix compile error in net.c with musl libc. Found and patch provided by
1844     zhasha (#278).
1845   * Fix macroization of 'inline' keyword when building as C++. (#279)
1846
1847Changes
1848   * Added checking of hostname length in mbedtls_ssl_set_hostname() to ensure
1849     domain names are compliant with RFC 1035.
1850   * Fixed paths for check_config.h in example config files. (Found by bachp)
1851     (#291)
1852
1853= mbed TLS 2.1.1 released 2015-09-17
1854
1855Security
1856   * Add countermeasure against Lenstra's RSA-CRT attack for PKCS#1 v1.5
1857     signatures. (Found by Florian Weimer, Red Hat.)
1858     https://securityblog.redhat.com/2015/09/02/factoring-rsa-keys-with-tls-perfect-forward-secrecy/
1859   * Fix possible client-side NULL pointer dereference (read) when the client
1860     tries to continue the handshake after it failed (a misuse of the API).
1861     (Found and patch provided by Fabian Foerg, Gotham Digital Science using
1862     afl-fuzz.)
1863
1864Bugfix
1865   * Fix warning when using a 64bit platform. (found by embedthis) (#275)
1866   * Fix off-by-one error in parsing Supported Point Format extension that
1867     caused some handshakes to fail.
1868
1869Changes
1870   * Made X509 profile pointer const in mbedtls_ssl_conf_cert_profile() to allow
1871     use of mbedtls_x509_crt_profile_next. (found by NWilson)
1872   * When a client initiates a reconnect from the same port as a live
1873     connection, if cookie verification is available
1874     (MBEDTLS_SSL_DTLS_HELLO_VERIFY defined in config.h, and usable cookie
1875     callbacks set with mbedtls_ssl_conf_dtls_cookies()), this will be
1876     detected and mbedtls_ssl_read() will return
1877     MBEDTLS_ERR_SSL_CLIENT_RECONNECT - it is then possible to start a new
1878     handshake with the same context. (See RFC 6347 section 4.2.8.)
1879
1880= mbed TLS 2.1.0 released 2015-09-04
1881
1882Features
1883   * Added support for yotta as a build system.
1884   * Primary open source license changed to Apache 2.0 license.
1885
1886Bugfix
1887   * Fix segfault in the benchmark program when benchmarking DHM.
1888   * Fix build error with CMake and pre-4.5 versions of GCC (found by Hugo
1889     Leisink).
1890   * Fix bug when parsing a ServerHello without extensions (found by David
1891     Sears).
1892   * Fix bug in CMake lists that caused libmbedcrypto.a not to be installed
1893     (found by Benoit Lecocq).
1894   * Fix bug in Makefile that caused libmbedcrypto and libmbedx509 not to be
1895     installed (found by Rawi666).
1896   * Fix compile error with armcc 5 with --gnu option.
1897   * Fix bug in Makefile that caused programs not to be installed correctly
1898     (found by robotanarchy) (#232).
1899   * Fix bug in Makefile that prevented from installing without building the
1900     tests (found by robotanarchy) (#232).
1901   * Fix missing -static-libgcc when building shared libraries for Windows
1902     with make.
1903   * Fix link error when building shared libraries for Windows with make.
1904   * Fix error when loading libmbedtls.so.
1905   * Fix bug in mbedtls_ssl_conf_default() that caused the default preset to
1906     be always used (found by dcb314) (#235)
1907   * Fix bug in mbedtls_rsa_public() and mbedtls_rsa_private() that could
1908     result trying to unlock an unlocked mutex on invalid input (found by
1909     Fredrik Axelsson) (#257)
1910   * Fix -Wshadow warnings (found by hnrkp) (#240)
1911   * Fix memory corruption on client with overlong PSK identity, around
1912     SSL_MAX_CONTENT_LEN or higher - not triggerrable remotely (found by
1913     Aleksandrs Saveljevs) (#238)
1914   * Fix unused function warning when using MBEDTLS_MDx_ALT or
1915     MBEDTLS_SHAxxx_ALT (found by Henrik) (#239)
1916   * Fix memory corruption in pkey programs (found by yankuncheng) (#210)
1917
1918Changes
1919   * The PEM parser now accepts a trailing space at end of lines (#226).
1920   * It is now possible to #include a user-provided configuration file at the
1921     end of the default config.h by defining MBEDTLS_USER_CONFIG_FILE on the
1922     compiler's command line.
1923   * When verifying a certificate chain, if an intermediate certificate is
1924     trusted, no later cert is checked. (suggested by hannes-landeholm)
1925     (#220).
1926   * Prepend a "thread identifier" to debug messages (issue pointed out by
1927     Hugo Leisink) (#210).
1928   * Add mbedtls_ssl_get_max_frag_len() to query the current maximum fragment
1929     length.
1930
1931= mbed TLS 2.0.0 released 2015-07-13
1932
1933Features
1934   * Support for DTLS 1.0 and 1.2 (RFC 6347).
1935   * Ability to override core functions from MDx, SHAx, AES and DES modules
1936     with custom implementation (eg hardware accelerated), complementing the
1937     ability to override the whole module.
1938   * New server-side implementation of session tickets that rotate keys to
1939     preserve forward secrecy, and allows sharing across multiple contexts.
1940   * Added a concept of X.509 cerificate verification profile that controls
1941     which algorithms and key sizes (curves for ECDSA) are acceptable.
1942   * Expanded configurability of security parameters in the SSL module with
1943     mbedtls_ssl_conf_dhm_min_bitlen() and mbedtls_ssl_conf_sig_hashes().
1944   * Introduced a concept of presets for SSL security-relevant configuration
1945     parameters.
1946
1947API Changes
1948   * The library has been split into libmbedcrypto, libmbedx509, libmbedtls.
1949     You now need to link to all of them if you use TLS for example.
1950   * All public identifiers moved to the mbedtls_* or MBEDTLS_* namespace.
1951     Some names have been further changed to make them more consistent.
1952     Migration helpers scripts/rename.pl and include/mbedtls/compat-1.3.h are
1953     provided. Full list of renamings in scripts/data_files/rename-1.3-2.0.txt
1954   * Renamings of fields inside structures, not covered by the previous list:
1955     mbedtls_cipher_info_t.key_length -> key_bitlen
1956     mbedtls_cipher_context_t.key_length -> key_bitlen
1957     mbedtls_ecp_curve_info.size -> bit_size
1958   * Headers are now found in the 'mbedtls' directory (previously 'polarssl').
1959   * The following _init() functions that could return errors have
1960     been split into an _init() that returns void and another function that
1961     should generally be the first function called on this context after init:
1962     mbedtls_ssl_init() -> mbedtls_ssl_setup()
1963     mbedtls_ccm_init() -> mbedtls_ccm_setkey()
1964     mbedtls_gcm_init() -> mbedtls_gcm_setkey()
1965     mbedtls_hmac_drbg_init() -> mbedtls_hmac_drbg_seed(_buf)()
1966     mbedtls_ctr_drbg_init()  -> mbedtls_ctr_drbg_seed()
1967     Note that for mbedtls_ssl_setup(), you need to be done setting up the
1968     ssl_config structure before calling it.
1969   * Most ssl_set_xxx() functions (all except ssl_set_bio(), ssl_set_hostname(),
1970     ssl_set_session() and ssl_set_client_transport_id(), plus
1971     ssl_legacy_renegotiation()) have been renamed to mbedtls_ssl_conf_xxx()
1972     (see rename.pl and compat-1.3.h above) and their first argument's type
1973     changed from ssl_context to ssl_config.
1974   * ssl_set_bio() changed signature (contexts merged, order switched, one
1975     additional callback for read-with-timeout).
1976   * The following functions have been introduced and must be used in callback
1977     implementations (SNI, PSK) instead of their *conf counterparts:
1978     mbedtls_ssl_set_hs_own_cert()
1979     mbedtls_ssl_set_hs_ca_chain()
1980     mbedtls_ssl_set_hs_psk()
1981   * mbedtls_ssl_conf_ca_chain() lost its last argument (peer_cn), now set
1982     using mbedtls_ssl_set_hostname().
1983   * mbedtls_ssl_conf_session_cache() changed prototype (only one context
1984     pointer, parameters reordered).
1985   * On server, mbedtls_ssl_conf_session_tickets_cb() must now be used in
1986     place of mbedtls_ssl_conf_session_tickets() to enable session tickets.
1987   * The SSL debug callback gained two new arguments (file name, line number).
1988   * Debug modes were removed.
1989   * mbedtls_ssl_conf_truncated_hmac() now returns void.
1990   * mbedtls_memory_buffer_alloc_init() now returns void.
1991   * X.509 verification flags are now an uint32_t. Affect the signature of:
1992     mbedtls_ssl_get_verify_result()
1993     mbedtls_x509_ctr_verify_info()
1994     mbedtls_x509_crt_verify() (flags, f_vrfy -> needs to be updated)
1995     mbedtls_ssl_conf_verify() (f_vrfy -> needs to be updated)
1996   * The following functions changed prototype to avoid an in-out length
1997     parameter:
1998     mbedtls_base64_encode()
1999     mbedtls_base64_decode()
2000     mbedtls_mpi_write_string()
2001     mbedtls_dhm_calc_secret()
2002   * In the NET module, all "int" and "int *" arguments for file descriptors
2003     changed type to "mbedtls_net_context *".
2004   * net_accept() gained new arguments for the size of the client_ip buffer.
2005   * In the threading layer, mbedtls_mutex_init() and mbedtls_mutex_free() now
2006     return void.
2007   * ecdsa_write_signature() gained an additional md_alg argument and
2008     ecdsa_write_signature_det() was deprecated.
2009   * pk_sign() no longer accepts md_alg == POLARSSL_MD_NONE with ECDSA.
2010   * Last argument of x509_crt_check_key_usage() and
2011     mbedtls_x509write_crt_set_key_usage() changed from int to unsigned.
2012   * test_ca_list (from certs.h) is renamed to test_cas_pem and is only
2013     available if POLARSSL_PEM_PARSE_C is defined (it never worked without).
2014   * Test certificates in certs.c are no longer guaranteed to be nul-terminated
2015     strings; use the new *_len variables instead of strlen().
2016   * Functions mbedtls_x509_xxx_parse(), mbedtls_pk_parse_key(),
2017     mbedtls_pk_parse_public_key() and mbedtls_dhm_parse_dhm() now expect the
2018     length parameter to include the terminating null byte for PEM input.
2019   * Signature of mpi_mul_mpi() changed to make the last argument unsigned
2020   * calloc() is now used instead of malloc() everywhere. API of platform
2021     layer and the memory_buffer_alloc module changed accordingly.
2022     (Thanks to Mansour Moufid for helping with the replacement.)
2023   * Change SSL_DISABLE_RENEGOTIATION config.h flag to SSL_RENEGOTIATION
2024     (support for renegotiation now needs explicit enabling in config.h).
2025   * Split MBEDTLS_HAVE_TIME into MBEDTLS_HAVE_TIME and MBEDTLS_HAVE_TIME_DATE
2026     in config.h
2027   * net_connect() and net_bind() have a new 'proto' argument to choose
2028     between TCP and UDP, using the macros NET_PROTO_TCP or NET_PROTO_UDP.
2029     Their 'port' argument type is changed to a string.
2030   * Some constness fixes
2031
2032Removals
2033   * Removed mbedtls_ecp_group_read_string(). Only named groups are supported.
2034   * Removed mbedtls_ecp_sub() and mbedtls_ecp_add(), use
2035     mbedtls_ecp_muladd().
2036   * Removed individual mdX_hmac, shaX_hmac, mdX_file and shaX_file functions
2037     (use generic functions from md.h)
2038   * Removed mbedtls_timing_msleep(). Use mbedtls_net_usleep() or a custom
2039     waiting function.
2040   * Removed test DHM parameters from the test certs module.
2041   * Removed the PBKDF2 module (use PKCS5).
2042   * Removed POLARSSL_ERROR_STRERROR_BC (use mbedtls_strerror()).
2043   * Removed compat-1.2.h (helper for migrating from 1.2 to 1.3).
2044   * Removed openssl.h (very partial OpenSSL compatibility layer).
2045   * Configuration options POLARSSL_HAVE_LONGLONG was removed (now always on).
2046   * Configuration options POLARSSL_HAVE_INT8 and POLARSSL_HAVE_INT16 have
2047     been removed (compiler is required to support 32-bit operations).
2048   * Configuration option POLARSSL_HAVE_IPV6 was removed (always enabled).
2049   * Removed test program o_p_test, the script compat.sh does more.
2050   * Removed test program ssl_test, superseded by ssl-opt.sh.
2051   * Removed helper script active-config.pl
2052
2053New deprecations
2054   * md_init_ctx() is deprecated in favour of md_setup(), that adds a third
2055     argument (allowing memory savings if HMAC is not used)
2056
2057Semi-API changes (technically public, morally private)
2058   * Renamed a few headers to include _internal in the name. Those headers are
2059     not supposed to be included by users.
2060   * Changed md_info_t into an opaque structure (use md_get_xxx() accessors).
2061   * Changed pk_info_t into an opaque structure.
2062   * Changed cipher_base_t into an opaque structure.
2063   * Removed sig_oid2 and rename sig_oid1 to sig_oid in x509_crt and x509_crl.
2064   * x509_crt.key_usage changed from unsigned char to unsigned int.
2065   * Removed r and s from ecdsa_context
2066   * Removed mode from des_context and des3_context
2067
2068Default behavior changes
2069   * The default minimum TLS version is now TLS 1.0.
2070   * RC4 is now blacklisted by default in the SSL/TLS layer, and excluded from the
2071     default ciphersuite list returned by ssl_list_ciphersuites()
2072   * Support for receiving SSLv2 ClientHello is now disabled by default at
2073     compile time.
2074   * The default authmode for SSL/TLS clients is now REQUIRED.
2075   * Support for RSA_ALT contexts in the PK layer is now optional. Since is is
2076     enabled in the default configuration, this is only noticeable if using a
2077     custom config.h
2078   * Default DHM parameters server-side upgraded from 1024 to 2048 bits.
2079   * A minimum RSA key size of 2048 bits is now enforced during ceritificate
2080     chain verification.
2081   * Negotiation of truncated HMAC is now disabled by default on server too.
2082   * The following functions are now case-sensitive:
2083     mbedtls_cipher_info_from_string()
2084     mbedtls_ecp_curve_info_from_name()
2085     mbedtls_md_info_from_string()
2086     mbedtls_ssl_ciphersuite_from_string()
2087     mbedtls_version_check_feature()
2088
2089Requirement changes
2090   * The minimum MSVC version required is now 2010 (better C99 support).
2091   * The NET layer now unconditionnaly relies on getaddrinfo() and select().
2092   * Compiler is required to support C99 types such as long long and uint32_t.
2093
2094API changes from the 1.4 preview branch
2095   * ssl_set_bio_timeout() was removed, split into mbedtls_ssl_set_bio() with
2096     new prototype, and mbedtls_ssl_set_read_timeout().
2097   * The following functions now return void:
2098     mbedtls_ssl_conf_transport()
2099     mbedtls_ssl_conf_max_version()
2100     mbedtls_ssl_conf_min_version()
2101   * DTLS no longer hard-depends on TIMING_C, but uses a callback interface
2102     instead, see mbedtls_ssl_set_timer_cb(), with the Timing module providing
2103     an example implementation, see mbedtls_timing_delay_context and
2104     mbedtls_timing_set/get_delay().
2105   * With UDP sockets, it is no longer necessary to call net_bind() again
2106     after a successful net_accept().
2107
2108Changes
2109   * mbedtls_ctr_drbg_random() and mbedtls_hmac_drbg_random() are now
2110     thread-safe if MBEDTLS_THREADING_C is enabled.
2111   * Reduced ROM fooprint of SHA-256 and added an option to reduce it even
2112     more (at the expense of performance) MBEDTLS_SHA256_SMALLER.
2113
2114= mbed TLS 1.3 branch
2115
2116Security
2117   * With authmode set to SSL_VERIFY_OPTIONAL, verification of keyUsage and
2118     extendedKeyUsage on the leaf certificate was lost (results not accessible
2119     via ssl_get_verify_results()).
2120   * Add countermeasure against "Lucky 13 strikes back" cache-based attack,
2121     https://dl.acm.org/citation.cfm?id=2714625
2122
2123Features
2124   * Improve ECC performance by using more efficient doubling formulas
2125     (contributed by Peter Dettman).
2126   * Add x509_crt_verify_info() to display certificate verification results.
2127   * Add support for reading DH parameters with privateValueLength included
2128     (contributed by Daniel Kahn Gillmor).
2129   * Add support for bit strings in X.509 names (request by Fredrik Axelsson).
2130   * Add support for id-at-uniqueIdentifier in X.509 names.
2131   * Add support for overriding snprintf() (except on Windows) and exit() in
2132     the platform layer.
2133   * Add an option to use macros instead of function pointers in the platform
2134     layer (helps get rid of unwanted references).
2135   * Improved Makefiles for Windows targets by fixing library targets and making
2136     cross-compilation easier (thanks to Alon Bar-Lev).
2137   * The benchmark program also prints heap usage for public-key primitives
2138     if POLARSSL_MEMORY_BUFFER_ALLOC_C and POLARSSL_MEMORY_DEBUG are defined.
2139   * New script ecc-heap.sh helps measuring the impact of ECC parameters on
2140     speed and RAM (heap only for now) usage.
2141   * New script memory.sh helps measuring the ROM and RAM requirements of two
2142     reduced configurations (PSK-CCM and NSA suite B).
2143   * Add config flag POLARSSL_DEPRECATED_WARNING (off by default) to produce
2144     warnings on use of deprecated functions (with GCC and Clang only).
2145   * Add config flag POLARSSL_DEPRECATED_REMOVED (off by default) to produce
2146     errors on use of deprecated functions.
2147
2148Bugfix
2149   * Fix compile errors with PLATFORM_NO_STD_FUNCTIONS.
2150   * Fix compile error with PLATFORM_EXIT_ALT (thanks to Rafał Przywara).
2151   * Fix bug in entropy.c when THREADING_C is also enabled that caused
2152     entropy_free() to crash (thanks to Rafał Przywara).
2153   * Fix memory leak when gcm_setkey() and ccm_setkey() are used more than
2154     once on the same context.
2155   * Fix bug in ssl_mail_client when password is longer that username (found
2156     by Bruno Pape).
2157   * Fix undefined behaviour (memcmp( NULL, NULL, 0 );) in X.509 modules
2158     (detected by Clang's 3.6 UBSan).
2159   * mpi_size() and mpi_msb() would segfault when called on an mpi that is
2160     initialized but not set (found by pravic).
2161   * Fix detection of support for getrandom() on Linux (reported by syzzer) by
2162     doing it at runtime (using uname) rather that compile time.
2163   * Fix handling of symlinks by "make install" (found by Gaël PORTAY).
2164   * Fix potential NULL pointer dereference (not trigerrable remotely) when
2165     ssl_write() is called before the handshake is finished (introduced in
2166     1.3.10) (first reported by Martin Blumenstingl).
2167   * Fix bug in pk_parse_key() that caused some valid private EC keys to be
2168     rejected.
2169   * Fix bug in Via Padlock support (found by Nikos Mavrogiannopoulos).
2170   * Fix thread safety bug in RSA operations (found by Fredrik Axelsson).
2171   * Fix hardclock() (only used in the benchmarking program) with some
2172     versions of mingw64 (found by kxjhlele).
2173   * Fix warnings from mingw64 in timing.c (found by kxjklele).
2174   * Fix potential unintended sign extension in asn1_get_len() on 64-bit
2175     platforms.
2176   * Fix potential memory leak in ssl_set_psk() (found by Mansour Moufid).
2177   * Fix compile error when POLARSSL_SSL_DISABLE_RENEGOTATION and
2178     POLARSSL_SSL_SSESSION_TICKETS where both enabled in config.h (introduced
2179     in 1.3.10).
2180   * Add missing extern "C" guard in aesni.h (reported by amir zamani).
2181   * Add missing dependency on SHA-256 in some x509 programs (reported by
2182     Gergely Budai).
2183   * Fix bug related to ssl_set_curves(): the client didn't check that the
2184     curve picked by the server was actually allowed.
2185
2186Changes
2187   * Remove bias in mpi_gen_prime (contributed by Pascal Junod).
2188   * Remove potential sources of timing variations (some contributed by Pascal
2189     Junod).
2190   * Options POLARSSL_HAVE_INT8 and POLARSSL_HAVE_INT16 are deprecated.
2191   * Enabling POLARSSL_NET_C without POLARSSL_HAVE_IPV6 is deprecated.
2192   * compat-1.2.h and openssl.h are deprecated.
2193   * Adjusting/overriding CFLAGS and LDFLAGS with the make build system is now
2194     more flexible (warning: OFLAGS is not used any more) (see the README)
2195     (contributed by Alon Bar-Lev).
2196   * ssl_set_own_cert() no longer calls pk_check_pair() since the
2197     performance impact was bad for some users (this was introduced in 1.3.10).
2198   * Move from SHA-1 to SHA-256 in example programs using signatures
2199     (suggested by Thorsten Mühlfelder).
2200   * Remove some unneeded inclusions of header files from the standard library
2201     "minimize" others (eg use stddef.h if only size_t is needed).
2202   * Change #include lines in test files to use double quotes instead of angle
2203     brackets for uniformity with the rest of the code.
2204   * Remove dependency on sscanf() in X.509 parsing modules.
2205
2206= mbed TLS 1.3.10 released 2015-02-09
2207Security
2208   * NULL pointer dereference in the buffer-based allocator when the buffer is
2209     full and polarssl_free() is called (found by Mark Hasemeyer)
2210     (only possible if POLARSSL_MEMORY_BUFFER_ALLOC_C is enabled, which it is
2211     not by default).
2212   * Fix remotely-triggerable uninitialised pointer dereference caused by
2213     crafted X.509 certificate (TLS server is not affected if it doesn't ask for a
2214     client certificate) (found using Codenomicon Defensics).
2215   * Fix remotely-triggerable memory leak caused by crafted X.509 certificates
2216     (TLS server is not affected if it doesn't ask for a client certificate)
2217     (found using Codenomicon Defensics).
2218   * Fix potential stack overflow while parsing crafted X.509 certificates
2219     (TLS server is not affected if it doesn't ask for a client certificate)
2220     (found using Codenomicon Defensics).
2221   * Fix timing difference that could theoretically lead to a
2222     Bleichenbacher-style attack in the RSA and RSA-PSK key exchanges
2223     (reported by Sebastian Schinzel).
2224
2225Features
2226   * Add support for FALLBACK_SCSV (draft-ietf-tls-downgrade-scsv).
2227   * Add support for Extended Master Secret (draft-ietf-tls-session-hash).
2228   * Add support for Encrypt-then-MAC (RFC 7366).
2229   * Add function pk_check_pair() to test if public and private keys match.
2230   * Add x509_crl_parse_der().
2231   * Add compile-time option POLARSSL_X509_MAX_INTERMEDIATE_CA to limit the
2232     length of an X.509 verification chain.
2233   * Support for renegotiation can now be disabled at compile-time
2234   * Support for 1/n-1 record splitting, a countermeasure against BEAST.
2235   * Certificate selection based on signature hash, preferring SHA-1 over SHA-2
2236     for pre-1.2 clients when multiple certificates are available.
2237   * Add support for getrandom() syscall on recent Linux kernels with Glibc or
2238     a compatible enough libc (eg uClibc).
2239   * Add ssl_set_arc4_support() to make it easier to disable RC4 at runtime
2240     while using the default ciphersuite list.
2241   * Added new error codes and debug messages about selection of
2242     ciphersuite/certificate.
2243
2244Bugfix
2245   * Stack buffer overflow if ctr_drbg_update() is called with too large
2246     add_len (found by Jean-Philippe Aumasson) (not triggerable remotely).
2247   * Possible buffer overflow of length at most POLARSSL_MEMORY_ALIGN_MULTIPLE
2248     if memory_buffer_alloc_init() was called with buf not aligned and len not
2249     a multiple of POLARSSL_MEMORY_ALIGN_MULTIPLE (not triggerable remotely).
2250   * User set CFLAGS were ignored by Cmake with gcc (introduced in 1.3.9, found
2251     by Julian Ospald).
2252   * Fix potential undefined behaviour in Camellia.
2253   * Fix potential failure in ECDSA signatures when POLARSSL_ECP_MAX_BITS is a
2254     multiple of 8 (found by Gergely Budai).
2255   * Fix unchecked return code in x509_crt_parse_path() on Windows (found by
2256     Peter Vaskovic).
2257   * Fix assembly selection for MIPS64 (thanks to James Cowgill).
2258   * ssl_get_verify_result() now works even if the handshake was aborted due
2259     to a failed verification (found by Fredrik Axelsson).
2260   * Skip writing and parsing signature_algorithm extension if none of the
2261     key exchanges enabled needs certificates. This fixes a possible interop
2262     issue with some servers when a zero-length extension was sent. (Reported
2263     by Peter Dettman.)
2264   * On a 0-length input, base64_encode() did not correctly set output length
2265     (found by Hendrik van den Boogaard).
2266
2267Changes
2268   * Use deterministic nonces for AEAD ciphers in TLS by default (possible to
2269     switch back to random with POLARSSL_SSL_AEAD_RANDOM_IV in config.h).
2270   * Blind RSA private operations even when POLARSSL_RSA_NO_CRT is defined.
2271   * ssl_set_own_cert() now returns an error on key-certificate mismatch.
2272   * Forbid repeated extensions in X.509 certificates.
2273   * debug_print_buf() now prints a text view in addition to hexadecimal.
2274   * A specific error is now returned when there are ciphersuites in common
2275     but none of them is usable due to external factors such as no certificate
2276     with a suitable (extended)KeyUsage or curve or no PSK set.
2277   * It is now possible to disable negotiation of truncated HMAC server-side
2278     at runtime with ssl_set_truncated_hmac().
2279   * Example programs for SSL client and server now disable SSLv3 by default.
2280   * Example programs for SSL client and server now disable RC4 by default.
2281   * Use platform.h in all test suites and programs.
2282
2283= PolarSSL 1.3.9 released 2014-10-20
2284Security
2285   * Lowest common hash was selected from signature_algorithms extension in
2286     TLS 1.2 (found by Darren Bane) (introduced in 1.3.8).
2287   * Remotely-triggerable memory leak when parsing some X.509 certificates
2288     (server is not affected if it doesn't ask for a client certificate)
2289     (found using Codenomicon Defensics).
2290   * Remotely-triggerable memory leak when parsing crafted ClientHello
2291     (not affected if ECC support was compiled out) (found using Codenomicon
2292     Defensics).
2293
2294Bugfix
2295   * Support escaping of commas in x509_string_to_names()
2296   * Fix compile error in ssl_pthread_server (found by Julian Ospald).
2297   * Fix net_accept() regarding non-blocking sockets (found by Luca Pesce).
2298   * Don't print uninitialised buffer in ssl_mail_client (found by Marc Abel).
2299   * Fix warnings from Clang's scan-build (contributed by Alfred Klomp).
2300   * Fix compile error in timing.c when POLARSSL_NET_C and POLARSSL_SELFTEST
2301     are defined but not POLARSSL_HAVE_TIME (found by Stephane Di Vito).
2302   * Remove non-existent file from VS projects (found by Peter Vaskovic).
2303   * ssl_read() could return non-application data records on server while
2304     renegotation was pending, and on client when a HelloRequest was received.
2305   * Server-initiated renegotiation would fail with non-blocking I/O if the
2306     write callback returned WANT_WRITE when requesting renegotiation.
2307   * ssl_close_notify() could send more than one message in some circumstances
2308     with non-blocking I/O.
2309   * Fix compiler warnings on iOS (found by Sander Niemeijer).
2310   * x509_crt_parse() did not increase total_failed on PEM error
2311   * Fix compile error with armcc in mpi_is_prime()
2312   * Fix potential bad read in parsing ServerHello (found by Adrien
2313     Vialletelle).
2314
2315Changes
2316   * Ciphersuites using SHA-256 or SHA-384 now require TLS 1.x (there is no
2317     standard defining how to use SHA-2 with SSL 3.0).
2318   * Ciphersuites using RSA-PSK key exchange new require TLS 1.x (the spec is
2319     ambiguous on how to encode some packets with SSL 3.0).
2320   * Made buffer size in pk_write_(pub)key_pem() more dynamic, eg smaller if
2321     RSA is disabled, larger if POLARSSL_MPI_MAX_SIZE is larger.
2322   * ssl_read() now returns POLARSSL_ERR_NET_WANT_READ rather than
2323     POLARSSL_ERR_SSL_UNEXPECTED_MESSAGE on harmless alerts.
2324   * POLARSSL_MPI_MAX_SIZE now defaults to 1024 in order to allow 8192 bits
2325     RSA keys.
2326   * Accept spaces at end of line or end of buffer in base64_decode().
2327   * X.509 certificates with more than one AttributeTypeAndValue per
2328     RelativeDistinguishedName are not accepted any more.
2329
2330= PolarSSL 1.3.8 released 2014-07-11
2331Security
2332   * Fix length checking for AEAD ciphersuites (found by Codenomicon).
2333     It was possible to crash the server (and client) using crafted messages
2334     when a GCM suite was chosen.
2335
2336Features
2337   * Add CCM module and cipher mode to Cipher Layer
2338   * Support for CCM and CCM_8 ciphersuites
2339   * Support for parsing and verifying RSASSA-PSS signatures in the X.509
2340     modules (certificates, CRLs and CSRs).
2341   * Blowfish in the cipher layer now supports variable length keys.
2342   * Add example config.h for PSK with CCM, optimized for low RAM usage.
2343   * Optimize for RAM usage in example config.h for NSA Suite B profile.
2344   * Add POLARSSL_REMOVE_ARC4_CIPHERSUITES to allow removing RC4 ciphersuites
2345     from the default list (inactive by default).
2346   * Add server-side enforcement of sent renegotiation requests
2347     (ssl_set_renegotiation_enforced())
2348   * Add SSL_CIPHERSUITES config.h flag to allow specifying a list of
2349     ciphersuites to use and save some memory if the list is small.
2350
2351Changes
2352   * Add LINK_WITH_PTHREAD option in CMake for explicit linking that is
2353     required on some platforms (e.g. OpenBSD)
2354   * Migrate zeroizing of data to polarssl_zeroize() instead of memset()
2355     against unwanted compiler optimizations
2356   * md_list() now returns hashes strongest first
2357   * Selection of hash for signing ServerKeyExchange in TLS 1.2 now picks
2358     strongest offered by client.
2359   * All public contexts have _init() and _free() functions now for simpler
2360     usage pattern
2361
2362Bugfix
2363   * Fix in debug_print_msg()
2364   * Enforce alignment in the buffer allocator even if buffer is not aligned
2365   * Remove less-than-zero checks on unsigned numbers
2366   * Stricter check on SSL ClientHello internal sizes compared to actual packet
2367     size (found by TrustInSoft)
2368   * Fix WSAStartup() return value check (found by Peter Vaskovic)
2369   * Other minor issues (found by Peter Vaskovic)
2370   * Fix symlink command for cross compiling with CMake (found by Andre
2371     Heinecke)
2372   * Fix DER output of gen_key app (found by Gergely Budai)
2373   * Very small records were incorrectly rejected when truncated HMAC was in
2374     use with some ciphersuites and versions (RC4 in all versions, CBC with
2375     versions < TLS 1.1).
2376   * Very large records using more than 224 bytes of padding were incorrectly
2377     rejected with CBC-based ciphersuites and TLS >= 1.1
2378   * Very large records using less padding could cause a buffer overread of up
2379     to 32 bytes with CBC-based ciphersuites and TLS >= 1.1
2380   * Restore ability to use a v1 cert as a CA if trusted locally. (This had
2381     been removed in 1.3.6.)
2382   * Restore ability to locally trust a self-signed cert that is not a proper
2383     CA for use as an end entity certificate. (This had been removed in
2384     1.3.6.)
2385   * Fix preprocessor checks for bn_mul PPC asm (found by Barry K. Nathan).
2386   * Use \n\t rather than semicolons for bn_mul asm, since some assemblers
2387     interpret semicolons as comment delimiters (found by Barry K. Nathan).
2388   * Fix off-by-one error in parsing Supported Point Format extension that
2389     caused some handshakes to fail.
2390   * Fix possible miscomputation of the premaster secret with DHE-PSK key
2391     exchange that caused some handshakes to fail with other implementations.
2392     (Failure rate <= 1/255 with common DHM moduli.)
2393   * Disable broken Sparc64 bn_mul assembly (found by Florian Obser).
2394   * Fix base64_decode() to return and check length correctly (in case of
2395     tight buffers)
2396   * Fix mpi_write_string() to write "00" as hex output for empty MPI (found
2397     by Hui Dong)
2398
2399= PolarSSL 1.3.7 released on 2014-05-02
2400Features
2401   * debug_set_log_mode() added to determine raw or full logging
2402   * debug_set_threshold() added to ignore messages over threshold level
2403   * version_check_feature() added to check for compile-time options at
2404     run-time
2405
2406Changes
2407   * POLARSSL_CONFIG_OPTIONS has been removed. All values are individually
2408     checked and filled in the relevant module headers
2409   * Debug module only outputs full lines instead of parts
2410   * Better support for the different Attribute Types from IETF PKIX (RFC 5280)
2411   * AES-NI now compiles with "old" assemblers too
2412   * Ciphersuites based on RC4 now have the lowest priority by default
2413
2414Bugfix
2415   * Only iterate over actual certificates in ssl_write_certificate_request()
2416     (found by Matthew Page)
2417   * Typos in platform.c and pkcs11.c (found by Daniel Phillips and Steffan
2418     Karger)
2419   * cert_write app should use subject of issuer certificate as issuer of cert
2420   * Fix false reject in padding check in ssl_decrypt_buf() for CBC
2421     ciphersuites, for full SSL frames of data.
2422   * Improve interoperability by not writing extension length in ClientHello /
2423     ServerHello when no extensions are present (found by Matthew Page)
2424   * rsa_check_pubkey() now allows an E up to N
2425   * On OpenBSD, use arc4random_buf() instead of rand() to prevent warnings
2426   * mpi_fill_random() was creating numbers larger than requested on
2427     big-endian platform when size was not an integer number of limbs
2428   * Fix dependencies issues in X.509 test suite.
2429   * Some parts of ssl_tls.c were compiled even when the module was disabled.
2430   * Fix detection of DragonflyBSD in net.c (found by Markus Pfeiffer)
2431   * Fix detection of Clang on some Apple platforms with CMake
2432     (found by Barry K. Nathan)
2433
2434= PolarSSL 1.3.6 released on 2014-04-11
2435
2436Features
2437   * Support for the ALPN SSL extension
2438   * Add option 'use_dev_random' to gen_key application
2439   * Enable verification of the keyUsage extension for CA and leaf
2440     certificates (POLARSSL_X509_CHECK_KEY_USAGE)
2441   * Enable verification of the extendedKeyUsage extension
2442     (POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE)
2443
2444Changes
2445   * x509_crt_info() now prints information about parsed extensions as well
2446   * pk_verify() now returns a specific error code when the signature is valid
2447     but shorter than the supplied length.
2448   * Use UTC time to check certificate validity.
2449   * Reject certificates with times not in UTC, per RFC 5280.
2450
2451Security
2452   * Avoid potential timing leak in ecdsa_sign() by blinding modular division.
2453     (Found by Watson Ladd.)
2454   * The notAfter date of some certificates was no longer checked since 1.3.5.
2455     This affects certificates in the user-supplied chain except the top
2456     certificate. If the user-supplied chain contains only one certificates,
2457     it is not affected (ie, its notAfter date is properly checked).
2458   * Prevent potential NULL pointer dereference in ssl_read_record() (found by
2459     TrustInSoft)
2460
2461Bugfix
2462   * The length of various ClientKeyExchange messages was not properly checked.
2463   * Some example server programs were not sending the close_notify alert.
2464   * Potential memory leak in mpi_exp_mod() when error occurs during
2465     calculation of RR.
2466   * Fixed malloc/free default #define in platform.c (found by Gergely Budai).
2467   * Fixed type which made POLARSSL_ENTROPY_FORCE_SHA256 uneffective (found by
2468     Gergely Budai).
2469   * Fix #include path in ecdsa.h which wasn't accepted by some compilers.
2470     (found by Gergely Budai)
2471   * Fix compile errors when POLARSSL_ERROR_STRERROR_BC is undefined (found by
2472     Shuo Chen).
2473   * oid_get_numeric_string() used to truncate the output without returning an
2474     error if the output buffer was just 1 byte too small.
2475   * dhm_parse_dhm() (hence dhm_parse_dhmfile()) did not set dhm->len.
2476   * Calling pk_debug() on an RSA-alt key would segfault.
2477   * pk_get_size() and pk_get_len() were off by a factor 8 for RSA-alt keys.
2478   * Potential buffer overwrite in pem_write_buffer() because of low length
2479     indication (found by Thijs Alkemade)
2480   * EC curves constants, which should be only in ROM since 1.3.3, were also
2481     stored in RAM due to missing 'const's (found by Gergely Budai).
2482
2483= PolarSSL 1.3.5 released on 2014-03-26
2484Features
2485   * HMAC-DRBG as a separate module
2486   * Option to set the Curve preference order (disabled by default)
2487   * Single Platform compatilibity layer (for memory / printf / fprintf)
2488   * Ability to provide alternate timing implementation
2489   * Ability to force the entropy module to use SHA-256 as its basis
2490     (POLARSSL_ENTROPY_FORCE_SHA256)
2491   * Testing script ssl-opt.sh added for testing 'live' ssl option
2492     interoperability against OpenSSL and PolarSSL
2493   * Support for reading EC keys that use SpecifiedECDomain in some cases.
2494   * Entropy module now supports seed writing and reading
2495
2496Changes
2497   * Deprecated the Memory layer
2498   * entropy_add_source(), entropy_update_manual() and entropy_gather()
2499     now thread-safe if POLARSSL_THREADING_C defined
2500   * Improvements to the CMake build system, contributed by Julian Ospald.
2501   * Work around a bug of the version of Clang shipped by Apple with Mavericks
2502     that prevented bignum.c from compiling. (Reported by Rafael Baptista.)
2503   * Revamped the compat.sh interoperatibility script to include support for
2504     testing against GnuTLS
2505   * Deprecated ssl_set_own_cert_rsa() and ssl_set_own_cert_rsa_alt()
2506   * Improvements to tests/Makefile, contributed by Oden Eriksson.
2507
2508Security
2509   * Forbid change of server certificate during renegotiation to prevent
2510     "triple handshake" attack when authentication mode is 'optional' (the
2511     attack was already impossible when authentication is required).
2512   * Check notBefore timestamp of certificates and CRLs from the future.
2513   * Forbid sequence number wrapping
2514   * Fixed possible buffer overflow with overlong PSK
2515   * Possible remotely-triggered out-of-bounds memory access fixed (found by
2516     TrustInSoft)
2517
2518Bugfix
2519   * ecp_gen_keypair() does more tries to prevent failure because of
2520     statistics
2521   * Fixed bug in RSA PKCS#1 v1.5 "reversed" operations
2522   * Fixed testing with out-of-source builds using cmake
2523   * Fixed version-major intolerance in server
2524   * Fixed CMake symlinking on out-of-source builds
2525   * Fixed dependency issues in test suite
2526   * Programs rsa_sign_pss and rsa_verify_pss were not using PSS since 1.3.0
2527   * Bignum's MIPS-32 assembly was used on MIPS-64, causing chaos. (Found by
2528     Alex Wilson.)
2529   * ssl_cache was creating entries when max_entries=0 if TIMING_C was enabled.
2530   * m_sleep() was sleeping twice too long on most Unix platforms.
2531   * Fixed bug with session tickets and non-blocking I/O in the unlikely case
2532     send() would return an EAGAIN error when sending the ticket.
2533   * ssl_cache was leaking memory when reusing a timed out entry containing a
2534     client certificate.
2535   * ssl_srv was leaking memory when client presented a timed out ticket
2536     containing a client certificate
2537   * ssl_init() was leaving a dirty pointer in ssl_context if malloc of
2538     out_ctr failed
2539   * ssl_handshake_init() was leaving dirty pointers in subcontexts if malloc
2540     of one of them failed
2541   * Fix typo in rsa_copy() that impacted PKCS#1 v2 contexts
2542   * x509_get_current_time() uses localtime_r() to prevent thread issues
2543
2544= PolarSSL 1.3.4 released on 2014-01-27
2545Features
2546   * Support for the Koblitz curves: secp192k1, secp224k1, secp256k1
2547   * Support for RIPEMD-160
2548   * Support for AES CFB8 mode
2549   * Support for deterministic ECDSA (RFC 6979)
2550
2551Bugfix
2552   * Potential memory leak in bignum_selftest()
2553   * Replaced expired test certificate
2554   * ssl_mail_client now terminates lines with CRLF, instead of LF
2555   * net module handles timeouts on blocking sockets better (found by Tilman
2556     Sauerbeck)
2557   * Assembly format fixes in bn_mul.h
2558
2559Security
2560   * Missing MPI_CHK calls added around unguarded mpi calls (found by
2561     TrustInSoft)
2562
2563= PolarSSL 1.3.3 released on 2013-12-31
2564Features
2565   * EC key generation support in gen_key app
2566   * Support for adhering to client ciphersuite order preference
2567     (POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE)
2568   * Support for Curve25519
2569   * Support for ECDH-RSA and ECDH-ECDSA key exchanges and ciphersuites
2570   * Support for IPv6 in the NET module
2571   * AES-NI support for AES, AES-GCM and AES key scheduling
2572   * SSL Pthread-based server example added (ssl_pthread_server)
2573
2574Changes
2575   * gen_prime() speedup
2576   * Speedup of ECP multiplication operation
2577   * Relaxed some SHA2 ciphersuite's version requirements
2578   * Dropped use of readdir_r() instead of readdir() with threading support
2579   * More constant-time checks in the RSA module
2580   * Split off curves from ecp.c into ecp_curves.c
2581   * Curves are now stored fully in ROM
2582   * Memory usage optimizations in ECP module
2583   * Removed POLARSSL_THREADING_DUMMY
2584
2585Bugfix
2586   * Fixed bug in mpi_set_bit() on platforms where t_uint is wider than int
2587   * Fixed X.509 hostname comparison (with non-regular characters)
2588   * SSL now gracefully handles missing RNG
2589   * Missing defines / cases for RSA_PSK key exchange
2590   * crypt_and_hash app checks MAC before final decryption
2591   * Potential memory leak in ssl_ticket_keys_init()
2592   * Memory leak in benchmark application
2593   * Fixed x509_crt_parse_path() bug on Windows platforms
2594   * Added missing MPI_CHK() around some statements in mpi_div_mpi() (found by
2595     TrustInSoft)
2596   * Fixed potential overflow in certificate size verification in
2597     ssl_write_certificate() (found by TrustInSoft)
2598
2599Security
2600   * Possible remotely-triggered out-of-bounds memory access fixed (found by
2601     TrustInSoft)
2602
2603= PolarSSL 1.3.2 released on 2013-11-04
2604Features
2605   * PK tests added to test framework
2606   * Added optional optimization for NIST MODP curves (POLARSSL_ECP_NIST_OPTIM)
2607   * Support for Camellia-GCM mode and ciphersuites
2608
2609Changes
2610   * Padding checks in cipher layer are now constant-time
2611   * Value comparisons in SSL layer are now constant-time
2612   * Support for serialNumber, postalAddress and postalCode in X509 names
2613   * SSL Renegotiation was refactored
2614
2615Bugfix
2616   * More stringent checks in cipher layer
2617   * Server does not send out extensions not advertised by client
2618   * Prevent possible alignment warnings on casting from char * to 'aligned *'
2619   * Misc fixes and additions to dependency checks
2620   * Const correctness
2621   * cert_write with selfsign should use issuer_name as subject_name
2622   * Fix ECDSA corner case: missing reduction mod N (found by DualTachyon)
2623   * Defines to handle UEFI environment under MSVC
2624   * Server-side initiated renegotiations send HelloRequest
2625
2626= PolarSSL 1.3.1 released on 2013-10-15
2627Features
2628   * Support for Brainpool curves and TLS ciphersuites (RFC 7027)
2629   * Support for ECDHE-PSK key-exchange and ciphersuites
2630   * Support for RSA-PSK key-exchange and ciphersuites
2631
2632Changes
2633   * RSA blinding locks for a smaller amount of time
2634   * TLS compression only allocates working buffer once
2635   * Introduced POLARSSL_HAVE_READDIR_R for systems without it
2636   * config.h is more script-friendly
2637
2638Bugfix
2639   * Missing MSVC defines added
2640   * Compile errors with POLARSSL_RSA_NO_CRT
2641   * Header files with 'polarssl/'
2642   * Const correctness
2643   * Possible naming collision in dhm_context
2644   * Better support for MSVC
2645   * threading_set_alt() name
2646   * Added missing x509write_crt_set_version()
2647
2648= PolarSSL 1.3.0 released on 2013-10-01
2649Features
2650   * Elliptic Curve Cryptography module added
2651   * Elliptic Curve Diffie Hellman module added
2652   * Ephemeral Elliptic Curve Diffie Hellman support for SSL/TLS
2653    (ECDHE-based ciphersuites)
2654   * Ephemeral Elliptic Curve Digital Signature Algorithm support for SSL/TLS
2655    (ECDSA-based ciphersuites)
2656   * Ability to specify allowed ciphersuites based on the protocol version.
2657   * PSK and DHE-PSK based ciphersuites added
2658   * Memory allocation abstraction layer added
2659   * Buffer-based memory allocator added (no malloc() / free() / HEAP usage)
2660   * Threading abstraction layer added (dummy / pthread / alternate)
2661   * Public Key abstraction layer added
2662   * Parsing Elliptic Curve keys
2663   * Parsing Elliptic Curve certificates
2664   * Support for max_fragment_length extension (RFC 6066)
2665   * Support for truncated_hmac extension (RFC 6066)
2666   * Support for zeros-and-length (ANSI X.923) padding, one-and-zeros
2667     (ISO/IEC 7816-4) padding and zero padding in the cipher layer
2668   * Support for session tickets (RFC 5077)
2669   * Certificate Request (CSR) generation with extensions (key_usage,
2670     ns_cert_type)
2671   * X509 Certificate writing with extensions (basic_constraints,
2672     issuer_key_identifier, etc)
2673   * Optional blinding for RSA, DHM and EC
2674   * Support for multiple active certificate / key pairs in SSL servers for
2675     the same host (Not to be confused with SNI!)
2676
2677Changes
2678   * Ability to enable / disable SSL v3 / TLS 1.0 / TLS 1.1 / TLS 1.2
2679     individually
2680   * Introduced separate SSL Ciphersuites module that is based on
2681     Cipher and MD information
2682   * Internals for SSL module adapted to have separate IV pointer that is
2683     dynamically set (Better support for hardware acceleration)
2684   * Moved all OID functionality to a separate module. RSA function
2685     prototypes for the RSA sign and verify functions changed as a result
2686   * Split up the GCM module into a starts/update/finish cycle
2687   * Client and server now filter sent and accepted ciphersuites on minimum
2688     and maximum protocol version
2689   * Ability to disable server_name extension (RFC 6066)
2690   * Renamed error_strerror() to the less conflicting polarssl_strerror()
2691     (Ability to keep old as well with POLARSSL_ERROR_STRERROR_BC)
2692   * SHA2 renamed to SHA256, SHA4 renamed to SHA512 and functions accordingly
2693   * All RSA operations require a random generator for blinding purposes
2694   * X509 core refactored
2695   * x509_crt_verify() now case insensitive for cn (RFC 6125 6.4)
2696   * Also compiles / runs without time-based functions (!POLARSSL_HAVE_TIME)
2697   * Support faulty X509 v1 certificates with extensions
2698     (POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3)
2699
2700Bugfix
2701   * Fixed parse error in ssl_parse_certificate_request()
2702   * zlib compression/decompression skipped on empty blocks
2703   * Support for AIX header locations in net.c module
2704   * Fixed file descriptor leaks
2705
2706Security
2707   * RSA blinding on CRT operations to counter timing attacks
2708     (found by Cyril Arnaud and Pierre-Alain Fouque)
2709
2710
2711= Version 1.2.14 released 2015-05-??
2712
2713Security
2714   * Fix potential invalid memory read in the server, that allows a client to
2715     crash it remotely (found by Caj Larsson).
2716   * Fix potential invalid memory read in certificate parsing, that allows a
2717     client to crash the server remotely if client authentication is enabled
2718     (found using Codenomicon Defensics).
2719   * Add countermeasure against "Lucky 13 strikes back" cache-based attack,
2720     https://dl.acm.org/citation.cfm?id=2714625
2721
2722Bugfix
2723   * Fix bug in Via Padlock support (found by Nikos Mavrogiannopoulos).
2724   * Fix hardclock() (only used in the benchmarking program) with some
2725     versions of mingw64 (found by kxjhlele).
2726   * Fix warnings from mingw64 in timing.c (found by kxjklele).
2727   * Fix potential unintended sign extension in asn1_get_len() on 64-bit
2728     platforms (found with Coverity Scan).
2729
2730= Version 1.2.13 released 2015-02-16
2731Note: Although PolarSSL has been renamed to mbed TLS, no changes reflecting
2732      this will be made in the 1.2 branch at this point.
2733
2734Security
2735   * Fix remotely-triggerable uninitialised pointer dereference caused by
2736     crafted X.509 certificate (TLS server is not affected if it doesn't ask
2737     for a client certificate) (found using Codenomicon Defensics).
2738   * Fix remotely-triggerable memory leak caused by crafted X.509 certificates
2739     (TLS server is not affected if it doesn't ask for a client certificate)
2740     (found using Codenomicon Defensics).
2741   * Fix potential stack overflow while parsing crafted X.509 certificates
2742     (TLS server is not affected if it doesn't ask for a client certificate)
2743     found using Codenomicon Defensics).
2744   * Fix buffer overread of size 1 when parsing crafted X.509 certificates
2745     (TLS server is not affected if it doesn't ask for a client certificate).
2746
2747Bugfix
2748   * Fix potential undefined behaviour in Camellia.
2749   * Fix memory leaks in PKCS#5 and PKCS#12.
2750   * Stack buffer overflow if ctr_drbg_update() is called with too large
2751     add_len (found by Jean-Philippe Aumasson) (not triggerable remotely).
2752   * Fix bug in MPI/bignum on s390/s390x (reported by Dan Horák) (introduced
2753     in 1.2.12).
2754   * Fix unchecked return code in x509_crt_parse_path() on Windows (found by
2755     Peter Vaskovic).
2756   * Fix assembly selection for MIPS64 (thanks to James Cowgill).
2757   * ssl_get_verify_result() now works even if the handshake was aborted due
2758     to a failed verification (found by Fredrik Axelsson).
2759   * Skip writing and parsing signature_algorithm extension if none of the
2760     key exchanges enabled needs certificates. This fixes a possible interop
2761     issue with some servers when a zero-length extension was sent. (Reported
2762     by Peter Dettman.)
2763   * On a 0-length input, base64_encode() did not correctly set output length
2764     (found by Hendrik van den Boogaard).
2765
2766Changes
2767   * Blind RSA private operations even when POLARSSL_RSA_NO_CRT is defined.
2768   * Forbid repeated extensions in X.509 certificates.
2769   * Add compile-time option POLARSSL_X509_MAX_INTERMEDIATE_CA to limit the
2770     length of an X.509 verification chain (default = 8).
2771= Version 1.2.12 released 2014-10-24
2772
2773Security
2774   * Remotely-triggerable memory leak when parsing some X.509 certificates
2775     (server is not affected if it doesn't ask for a client certificate).
2776     (Found using Codenomicon Defensics.)
2777
2778Bugfix
2779   * Fix potential bad read in parsing ServerHello (found by Adrien
2780     Vialletelle).
2781   * ssl_close_notify() could send more than one message in some circumstances
2782     with non-blocking I/O.
2783   * x509_crt_parse() did not increase total_failed on PEM error
2784   * Fix compiler warnings on iOS (found by Sander Niemeijer).
2785   * Don't print uninitialised buffer in ssl_mail_client (found by Marc Abel).
2786   * Fix net_accept() regarding non-blocking sockets (found by Luca Pesce).
2787   * ssl_read() could return non-application data records on server while
2788     renegotation was pending, and on client when a HelloRequest was received.
2789   * Fix warnings from Clang's scan-build (contributed by Alfred Klomp).
2790
2791Changes
2792   * X.509 certificates with more than one AttributeTypeAndValue per
2793     RelativeDistinguishedName are not accepted any more.
2794   * ssl_read() now returns POLARSSL_ERR_NET_WANT_READ rather than
2795     POLARSSL_ERR_SSL_UNEXPECTED_MESSAGE on harmless alerts.
2796   * Accept spaces at end of line or end of buffer in base64_decode().
2797
2798= Version 1.2.11 released 2014-07-11
2799Features
2800   * Entropy module now supports seed writing and reading
2801
2802Changes
2803   * Introduced POLARSSL_HAVE_READDIR_R for systems without it
2804   * Improvements to the CMake build system, contributed by Julian Ospald.
2805   * Work around a bug of the version of Clang shipped by Apple with Mavericks
2806     that prevented bignum.c from compiling. (Reported by Rafael Baptista.)
2807   * Improvements to tests/Makefile, contributed by Oden Eriksson.
2808   * Use UTC time to check certificate validity.
2809   * Reject certificates with times not in UTC, per RFC 5280.
2810   * Migrate zeroizing of data to polarssl_zeroize() instead of memset()
2811     against unwanted compiler optimizations
2812
2813Security
2814   * Forbid change of server certificate during renegotiation to prevent
2815     "triple handshake" attack when authentication mode is optional (the
2816     attack was already impossible when authentication is required).
2817   * Check notBefore timestamp of certificates and CRLs from the future.
2818   * Forbid sequence number wrapping
2819   * Prevent potential NULL pointer dereference in ssl_read_record() (found by
2820     TrustInSoft)
2821   * Fix length checking for AEAD ciphersuites (found by Codenomicon).
2822     It was possible to crash the server (and client) using crafted messages
2823     when a GCM suite was chosen.
2824
2825Bugfix
2826   * Fixed X.509 hostname comparison (with non-regular characters)
2827   * SSL now gracefully handles missing RNG
2828   * crypt_and_hash app checks MAC before final decryption
2829   * Fixed x509_crt_parse_path() bug on Windows platforms
2830   * Added missing MPI_CHK() around some statements in mpi_div_mpi() (found by
2831     TrustInSoft)
2832   * Fixed potential overflow in certificate size verification in
2833     ssl_write_certificate() (found by TrustInSoft)
2834   * Fix ASM format in bn_mul.h
2835   * Potential memory leak in bignum_selftest()
2836   * Replaced expired test certificate
2837   * ssl_mail_client now terminates lines with CRLF, instead of LF
2838   * Fix bug in RSA PKCS#1 v1.5 "reversed" operations
2839   * Fixed testing with out-of-source builds using cmake
2840   * Fixed version-major intolerance in server
2841   * Fixed CMake symlinking on out-of-source builds
2842   * Bignum's MIPS-32 assembly was used on MIPS-64, causing chaos. (Found by
2843     Alex Wilson.)
2844   * ssl_init() was leaving a dirty pointer in ssl_context if malloc of
2845     out_ctr failed
2846   * ssl_handshake_init() was leaving dirty pointers in subcontexts if malloc
2847     of one of them failed
2848   * x509_get_current_time() uses localtime_r() to prevent thread issues
2849   * Some example server programs were not sending the close_notify alert.
2850   * Potential memory leak in mpi_exp_mod() when error occurs during
2851     calculation of RR.
2852   * Improve interoperability by not writing extension length in ClientHello
2853     when no extensions are present (found by Matthew Page)
2854   * rsa_check_pubkey() now allows an E up to N
2855   * On OpenBSD, use arc4random_buf() instead of rand() to prevent warnings
2856   * mpi_fill_random() was creating numbers larger than requested on
2857     big-endian platform when size was not an integer number of limbs
2858   * Fix detection of DragonflyBSD in net.c (found by Markus Pfeiffer)
2859   * Stricter check on SSL ClientHello internal sizes compared to actual packet
2860     size (found by TrustInSoft)
2861   * Fix preprocessor checks for bn_mul PPC asm (found by Barry K. Nathan).
2862   * Use \n\t rather than semicolons for bn_mul asm, since some assemblers
2863     interpret semicolons as comment delimiters (found by Barry K. Nathan).
2864   * Disable broken Sparc64 bn_mul assembly (found by Florian Obser).
2865   * Fix base64_decode() to return and check length correctly (in case of
2866     tight buffers)
2867
2868= Version 1.2.10 released 2013-10-07
2869Changes
2870   * Changed RSA blinding to a slower but thread-safe version
2871
2872Bugfix
2873   * Fixed memory leak in RSA as a result of introduction of blinding
2874   * Fixed ssl_pkcs11_decrypt() prototype
2875   * Fixed MSVC project files
2876
2877= Version 1.2.9 released 2013-10-01
2878Changes
2879   * x509_verify() now case insensitive for cn (RFC 6125 6.4)
2880
2881Bugfix
2882   * Fixed potential memory leak when failing to resume a session
2883   * Fixed potential file descriptor leaks (found by Remi Gacogne)
2884   * Minor fixes
2885
2886Security
2887   * Fixed potential heap buffer overflow on large hostname setting
2888   * Fixed potential negative value misinterpretation in load_file()
2889   * RSA blinding on CRT operations to counter timing attacks
2890     (found by Cyril Arnaud and Pierre-Alain Fouque)
2891
2892= Version 1.2.8 released 2013-06-19
2893Features
2894   * Parsing of PKCS#8 encrypted private key files
2895   * PKCS#12 PBE and derivation functions
2896   * Centralized module option values in config.h to allow user-defined
2897     settings without editing header files by using POLARSSL_CONFIG_OPTIONS
2898
2899Changes
2900   * HAVEGE random generator disabled by default
2901   * Internally split up x509parse_key() into a (PEM) handler function
2902     and specific DER parser functions for the PKCS#1 and unencrypted
2903     PKCS#8 private key formats
2904   * Added mechanism to provide alternative implementations for all
2905     symmetric cipher and hash algorithms (e.g. POLARSSL_AES_ALT in
2906     config.h)
2907   * PKCS#5 module added. Moved PBKDF2 functionality inside and deprecated
2908     old PBKDF2 module
2909
2910Bugfix
2911   * Secure renegotiation extension should only be sent in case client
2912     supports secure renegotiation
2913   * Fixed offset for cert_type list in ssl_parse_certificate_request()
2914   * Fixed const correctness issues that have no impact on the ABI
2915   * x509parse_crt() now better handles PEM error situations
2916   * ssl_parse_certificate() now calls x509parse_crt_der() directly
2917     instead of the x509parse_crt() wrapper that can also parse PEM
2918     certificates
2919   * x509parse_crtpath() is now reentrant and uses more portable stat()
2920   * Fixed bignum.c and bn_mul.h to support Thumb2 and LLVM compiler
2921   * Fixed values for 2-key Triple DES in cipher layer
2922   * ssl_write_certificate_request() can handle empty ca_chain
2923
2924Security
2925   * A possible DoS during the SSL Handshake, due to faulty parsing of
2926     PEM-encoded certificates has been fixed (found by Jack Lloyd)
2927
2928= Version 1.2.7 released 2013-04-13
2929Features
2930   * Ability to specify allowed ciphersuites based on the protocol version.
2931
2932Changes
2933   * Default Blowfish keysize is now 128-bits
2934   * Test suites made smaller to accommodate Raspberry Pi
2935
2936Bugfix
2937   * Fix for MPI assembly for ARM
2938   * GCM adapted to support sizes > 2^29
2939
2940= Version 1.2.6 released 2013-03-11
2941Bugfix
2942   * Fixed memory leak in ssl_free() and ssl_reset() for active session
2943   * Corrected GCM counter incrementation to use only 32-bits instead of
2944     128-bits (found by Yawning Angel)
2945   * Fixes for 64-bit compilation with MS Visual Studio
2946   * Fixed net_bind() for specified IP addresses on little endian systems
2947   * Fixed assembly code for ARM (Thumb and regular) for some compilers
2948
2949Changes
2950   * Internally split up rsa_pkcs1_encrypt(), rsa_pkcs1_decrypt(),
2951     rsa_pkcs1_sign() and rsa_pkcs1_verify() to separate PKCS#1 v1.5 and
2952     PKCS#1 v2.1 functions
2953   * Added support for custom labels when using rsa_rsaes_oaep_encrypt()
2954     or rsa_rsaes_oaep_decrypt()
2955   * Re-added handling for SSLv2 Client Hello when the define
2956     POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO is set
2957   * The SSL session cache module (ssl_cache) now also retains peer_cert
2958     information (not the entire chain)
2959
2960Security
2961   * Removed further timing differences during SSL message decryption in
2962     ssl_decrypt_buf()
2963   * Removed timing differences due to bad padding from
2964     rsa_rsaes_pkcs1_v15_decrypt() and rsa_pkcs1_decrypt() for PKCS#1 v1.5
2965     operations
2966
2967= Version 1.2.5 released 2013-02-02
2968Changes
2969   * Allow enabling of dummy error_strerror() to support some use-cases
2970   * Debug messages about padding errors during SSL message decryption are
2971     disabled by default and can be enabled with POLARSSL_SSL_DEBUG_ALL
2972   * Sending of security-relevant alert messages that do not break
2973     interoperability can be switched on/off with the flag
2974     POLARSSL_SSL_ALL_ALERT_MESSAGES
2975
2976Security
2977   * Removed timing differences during SSL message decryption in
2978     ssl_decrypt_buf() due to badly formatted padding
2979
2980= Version 1.2.4 released 2013-01-25
2981Changes
2982   * More advanced SSL ciphersuite representation and moved to more dynamic
2983     SSL core
2984   * Added ssl_handshake_step() to allow single stepping the handshake process
2985
2986Bugfix
2987   * Memory leak when using RSA_PKCS_V21 operations fixed
2988   * Handle future version properly in ssl_write_certificate_request()
2989   * Correctly handle CertificateRequest message in client for <= TLS 1.1
2990     without DN list
2991
2992= Version 1.2.3 released 2012-11-26
2993Bugfix
2994   * Server not always sending correct CertificateRequest message
2995
2996= Version 1.2.2 released 2012-11-24
2997Changes
2998   * Added p_hw_data to ssl_context for context specific hardware acceleration
2999     data
3000   * During verify trust-CA is only checked for expiration and CRL presence
3001
3002Bugfixes
3003   * Fixed client authentication compatibility
3004   * Fixed dependency on POLARSSL_SHA4_C in SSL modules
3005
3006= Version 1.2.1 released 2012-11-20
3007Changes
3008   * Depth that the certificate verify callback receives is now numbered
3009     bottom-up (Peer cert depth is 0)
3010
3011Bugfixes
3012   * Fixes for MSVC6
3013   * Moved mpi_inv_mod() outside POLARSSL_GENPRIME
3014   * Allow R and A to point to same mpi in mpi_div_mpi (found by Manuel
3015     Pégourié-Gonnard)
3016   * Fixed possible segfault in mpi_shift_r() (found by Manuel
3017     Pégourié-Gonnard)
3018   * Added max length check for rsa_pkcs1_sign with PKCS#1 v2.1
3019
3020= Version 1.2.0 released 2012-10-31
3021Features
3022   * Added support for NULL cipher (POLARSSL_CIPHER_NULL_CIPHER) and weak
3023     ciphersuites (POLARSSL_ENABLE_WEAK_CIPHERSUITES). They are disabled by
3024     default!
3025   * Added support for wildcard certificates
3026   * Added support for multi-domain certificates through the X509 Subject
3027     Alternative Name extension
3028   * Added preliminary ASN.1 buffer writing support
3029   * Added preliminary X509 Certificate Request writing support
3030   * Added key_app_writer example application
3031   * Added cert_req example application
3032   * Added base Galois Counter Mode (GCM) for AES
3033   * Added TLS 1.2 support (RFC 5246)
3034   * Added GCM suites to TLS 1.2 (RFC 5288)
3035   * Added commandline error code convertor (util/strerror)
3036   * Added support for Hardware Acceleration hooking in SSL/TLS
3037   * Added OpenSSL / PolarSSL compatibility script (tests/compat.sh) and
3038     example application (programs/ssl/o_p_test) (requires OpenSSL)
3039   * Added X509 CA Path support
3040   * Added Thumb assembly optimizations
3041   * Added DEFLATE compression support as per RFC3749 (requires zlib)
3042   * Added blowfish algorithm (Generic and cipher layer)
3043   * Added PKCS#5 PBKDF2 key derivation function
3044   * Added Secure Renegotiation (RFC 5746)
3045   * Added predefined DHM groups from RFC 5114
3046   * Added simple SSL session cache implementation
3047   * Added ServerName extension parsing (SNI) at server side
3048   * Added option to add minimum accepted SSL/TLS protocol version
3049
3050Changes
3051   * Removed redundant POLARSSL_DEBUG_MSG define
3052   * AES code only check for Padlock once
3053   * Fixed const-correctness mpi_get_bit()
3054   * Documentation for mpi_lsb() and mpi_msb()
3055   * Moved out_msg to out_hdr + 32 to support hardware acceleration
3056   * Changed certificate verify behaviour to comply with RFC 6125 section 6.3
3057     to not match CN if subjectAltName extension is present (Closes ticket #56)
3058   * Cipher layer cipher_mode_t POLARSSL_MODE_CFB128 is renamed to
3059     POLARSSL_MODE_CFB, to also handle different block size CFB modes.
3060   * Removed handling for SSLv2 Client Hello (as per RFC 5246 recommendation)
3061   * Revamped session resumption handling
3062   * Generalized external private key implementation handling (like PKCS#11)
3063     in SSL/TLS
3064   * Revamped x509_verify() and the SSL f_vrfy callback implementations
3065   * Moved from unsigned long to fixed width uint32_t types throughout code
3066   * Renamed ciphersuites naming scheme to IANA reserved names
3067
3068Bugfix
3069   * Fixed handling error in mpi_cmp_mpi() on longer B values (found by
3070     Hui Dong)
3071   * Fixed potential heap corruption in x509_name allocation
3072   * Fixed single RSA test that failed on Big Endian systems (Closes ticket #54)
3073   * mpi_exp_mod() now correctly handles negative base numbers (Closes ticket
3074     #52)
3075   * Handle encryption with private key and decryption with public key as per
3076     RFC 2313
3077   * Handle empty certificate subject names
3078   * Prevent reading over buffer boundaries on X509 certificate parsing
3079   * mpi_add_abs() now correctly handles adding short numbers to long numbers
3080     with carry rollover (found by Ruslan Yushchenko)
3081   * Handle existence of OpenSSL Trust Extensions at end of X.509 DER blob
3082   * Fixed MPI assembly for SPARC64 platform
3083
3084Security
3085   * Fixed potential memory zeroization on miscrafted RSA key (found by Eloi
3086     Vanderbeken)
3087
3088= Version 1.1.8 released on 2013-10-01
3089Bugfix
3090   * Fixed potential memory leak when failing to resume a session
3091   * Fixed potential file descriptor leaks
3092
3093Security
3094   * Potential buffer-overflow for ssl_read_record() (independently found by
3095     both TrustInSoft and Paul Brodeur of Leviathan Security Group)
3096   * Potential negative value misinterpretation in load_file()
3097   * Potential heap buffer overflow on large hostname setting
3098
3099= Version 1.1.7 released on 2013-06-19
3100Changes
3101   * HAVEGE random generator disabled by default
3102
3103Bugfix
3104   * x509parse_crt() now better handles PEM error situations
3105   * ssl_parse_certificate() now calls x509parse_crt_der() directly
3106     instead of the x509parse_crt() wrapper that can also parse PEM
3107     certificates
3108   * Fixed values for 2-key Triple DES in cipher layer
3109   * ssl_write_certificate_request() can handle empty ca_chain
3110
3111Security
3112   * A possible DoS during the SSL Handshake, due to faulty parsing of
3113     PEM-encoded certificates has been fixed (found by Jack Lloyd)
3114
3115= Version 1.1.6 released on 2013-03-11
3116Bugfix
3117   * Fixed net_bind() for specified IP addresses on little endian systems
3118
3119Changes
3120   * Allow enabling of dummy error_strerror() to support some use-cases
3121   * Debug messages about padding errors during SSL message decryption are
3122     disabled by default and can be enabled with POLARSSL_SSL_DEBUG_ALL
3123
3124Security
3125   * Removed timing differences during SSL message decryption in
3126     ssl_decrypt_buf()
3127   * Removed timing differences due to bad padding from
3128     rsa_rsaes_pkcs1_v15_decrypt() and rsa_pkcs1_decrypt() for PKCS#1 v1.5
3129     operations
3130
3131= Version 1.1.5 released on 2013-01-16
3132Bugfix
3133   * Fixed MPI assembly for SPARC64 platform
3134   * Handle existence of OpenSSL Trust Extensions at end of X.509 DER blob
3135   * mpi_add_abs() now correctly handles adding short numbers to long numbers
3136     with carry rollover
3137   * Moved mpi_inv_mod() outside POLARSSL_GENPRIME
3138   * Prevent reading over buffer boundaries on X509 certificate parsing
3139   * mpi_exp_mod() now correctly handles negative base numbers (Closes ticket
3140     #52)
3141   * Fixed possible segfault in mpi_shift_r() (found by Manuel
3142     Pégourié-Gonnard)
3143   * Allow R and A to point to same mpi in mpi_div_mpi (found by Manuel
3144     Pégourié-Gonnard)
3145   * Added max length check for rsa_pkcs1_sign with PKCS#1 v2.1
3146   * Memory leak when using RSA_PKCS_V21 operations fixed
3147   * Handle encryption with private key and decryption with public key as per
3148     RFC 2313
3149   * Fixes for MSVC6
3150
3151Security
3152   * Fixed potential memory zeroization on miscrafted RSA key (found by Eloi
3153     Vanderbeken)
3154
3155= Version 1.1.4 released on 2012-05-31
3156Bugfix
3157   * Correctly handle empty SSL/TLS packets (Found by James Yonan)
3158   * Fixed potential heap corruption in x509_name allocation
3159   * Fixed single RSA test that failed on Big Endian systems (Closes ticket #54)
3160
3161= Version 1.1.3 released on 2012-04-29
3162Bugfix
3163   * Fixed random MPI generation to not generate more size than requested.
3164
3165= Version 1.1.2 released on 2012-04-26
3166Bugfix
3167   * Fixed handling error in mpi_cmp_mpi() on longer B values (found by
3168     Hui Dong)
3169
3170Security
3171   * Fixed potential memory corruption on miscrafted client messages (found by
3172     Frama-C team at CEA LIST)
3173   * Fixed generation of DHM parameters to correct length (found by Ruslan
3174     Yushchenko)
3175
3176= Version 1.1.1 released on 2012-01-23
3177Bugfix
3178   * Check for failed malloc() in ssl_set_hostname() and x509_get_entries()
3179     (Closes ticket #47, found by Hugo Leisink)
3180   * Fixed issues with Intel compiler on 64-bit systems (Closes ticket #50)
3181   * Fixed multiple compiler warnings for VS6 and armcc
3182   * Fixed bug in CTR_CRBG selftest
3183
3184= Version 1.1.0 released on 2011-12-22
3185Features
3186   * Added ssl_session_reset() to allow better multi-connection pools of
3187     SSL contexts without needing to set all non-connection-specific
3188     data and pointers again. Adapted ssl_server to use this functionality.
3189   * Added ssl_set_max_version() to allow clients to offer a lower maximum
3190     supported version to a server to help buggy server implementations.
3191     (Closes ticket #36)
3192   * Added cipher_get_cipher_mode() and cipher_get_cipher_operation()
3193     introspection functions (Closes ticket #40)
3194   * Added CTR_DRBG based on AES-256-CTR (NIST SP 800-90) random generator
3195   * Added a generic entropy accumulator that provides support for adding
3196     custom entropy sources and added some generic and platform dependent
3197     entropy sources
3198
3199Changes
3200   * Documentation for AES and Camellia in modes CTR and CFB128 clarified.
3201   * Fixed rsa_encrypt and rsa_decrypt examples to use public key for
3202     encryption and private key for decryption. (Closes ticket #34)
3203   * Inceased maximum size of ASN1 length reads to 32-bits.
3204   * Added an EXPLICIT tag number parameter to x509_get_ext()
3205   * Added a separate CRL entry extension parsing function
3206   * Separated the ASN.1 parsing code from the X.509 specific parsing code.
3207     So now there is a module that is controlled with POLARSSL_ASN1_PARSE_C.
3208   * Changed the defined key-length of DES ciphers in cipher.h to include the
3209     parity bits, to prevent mistakes in copying data. (Closes ticket #33)
3210   * Loads of minimal changes to better support WINCE as a build target
3211     (Credits go to Marco Lizza)
3212   * Added POLARSSL_MPI_WINDOW_SIZE definition to allow easier time to memory
3213     trade-off
3214   * Introduced POLARSSL_MPI_MAX_SIZE and POLARSSL_MPI_MAX_BITS for MPI size
3215     management (Closes ticket #44)
3216   * Changed the used random function pointer to more flexible format. Renamed
3217     havege_rand() to havege_random() to prevent mistakes. Lots of changes as
3218     a consequence in library code and programs
3219   * Moved all examples programs to use the new entropy and CTR_DRBG
3220   * Added permissive certificate parsing to x509parse_crt() and
3221     x509parse_crtfile(). With permissive parsing the parsing does not stop on
3222     encountering a parse-error. Beware that the meaning of return values has
3223     changed!
3224   * All error codes are now negative. Even on mermory failures and IO errors.
3225
3226Bugfix
3227   * Fixed faulty HMAC-MD2 implementation. Found by dibac. (Closes
3228     ticket #37)
3229   * Fixed a bug where the CRL parser expected an EXPLICIT ASN.1 tag
3230     before version numbers
3231   * Allowed X509 key usage parsing to accept 4 byte values instead of the
3232     standard 1 byte version sometimes used by Microsoft. (Closes ticket #38)
3233   * Fixed incorrect behaviour in case of RSASSA-PSS with a salt length
3234     smaller than the hash length. (Closes ticket #41)
3235   * If certificate serial is longer than 32 octets, serial number is now
3236     appended with '....' after first 28 octets
3237   * Improved build support for s390x and sparc64 in bignum.h
3238   * Fixed MS Visual C++ name clash with int64 in sha4.h
3239   * Corrected removal of leading "00:" in printing serial numbers in
3240     certificates and CRLs
3241
3242= Version 1.0.0 released on 2011-07-27
3243Features
3244   * Expanded cipher layer with support for CFB128 and CTR mode
3245   * Added rsa_encrypt and rsa_decrypt simple example programs.
3246
3247Changes
3248   * The generic cipher and message digest layer now have normal error
3249     codes instead of integers
3250
3251Bugfix
3252   * Undid faulty bug fix in ssl_write() when flushing old data (Ticket
3253     #18)
3254
3255= Version 0.99-pre5 released on 2011-05-26
3256Features
3257   * Added additional Cipher Block Modes to symmetric ciphers
3258     (AES CTR, Camellia CTR, XTEA CBC) including the option to
3259     enable and disable individual modes when needed
3260   * Functions requiring File System functions can now be disabled
3261     by undefining POLARSSL_FS_IO
3262   * A error_strerror function() has been added to translate between
3263     error codes and their description.
3264   * Added mpi_get_bit() and mpi_set_bit() individual bit setter/getter
3265     functions.
3266   * Added ssl_mail_client and ssl_fork_server as example programs.
3267
3268Changes
3269   * Major argument / variable rewrite. Introduced use of size_t
3270     instead of int for buffer lengths and loop variables for
3271     better unsigned / signed use. Renamed internal bigint types
3272     t_int and t_dbl to t_uint and t_udbl in the process
3273   * mpi_init() and mpi_free() now only accept a single MPI
3274     argument and do not accept variable argument lists anymore.
3275   * The error codes have been remapped and combining error codes
3276     is now done with a PLUS instead of an OR as error codes
3277     used are negative.
3278   * Changed behaviour of net_read(), ssl_fetch_input() and ssl_recv().
3279     net_recv() now returns 0 on EOF instead of
3280     POLARSSL_ERR_NET_CONN_RESET. ssl_fetch_input() returns
3281     POLARSSL_ERR_SSL_CONN_EOF on an EOF from its f_recv() function.
3282     ssl_read() returns 0 if a POLARSSL_ERR_SSL_CONN_EOF is received
3283     after the handshake.
3284   * Network functions now return POLARSSL_ERR_NET_WANT_READ or
3285     POLARSSL_ERR_NET_WANT_WRITE instead of the ambiguous
3286     POLARSSL_ERR_NET_TRY_AGAIN
3287
3288= Version 0.99-pre4 released on 2011-04-01
3289Features
3290   * Added support for PKCS#1 v2.1 encoding and thus support
3291     for the RSAES-OAEP and RSASSA-PSS operations.
3292   * Reading of Public Key files incorporated into default x509
3293     functionality as well.
3294   * Added mpi_fill_random() for centralized filling of big numbers
3295     with random data (Fixed ticket #10)
3296
3297Changes
3298   * Debug print of MPI now removes leading zero octets and
3299     displays actual bit size of the value.
3300   * x509parse_key() (and as a consequence x509parse_keyfile())
3301     does not zeroize memory in advance anymore. Use rsa_init()
3302     before parsing a key or keyfile!
3303
3304Bugfix
3305   * Debug output of MPI's now the same independent of underlying
3306     platform (32-bit / 64-bit) (Fixes ticket #19, found by Mads
3307     Kiilerich and Mihai Militaru)
3308   * Fixed bug in ssl_write() when flushing old data (Fixed ticket
3309     #18, found by Nikolay Epifanov)
3310   * Fixed proper handling of RSASSA-PSS verification with variable
3311     length salt lengths
3312
3313= Version 0.99-pre3 released on 2011-02-28
3314This release replaces version 0.99-pre2 which had possible copyright issues.
3315Features
3316   * Parsing PEM private keys encrypted with DES and AES
3317     are now supported as well (Fixes ticket #5)
3318   * Added crl_app program to allow easy reading and
3319     printing of X509 CRLs from file
3320
3321Changes
3322   * Parsing of PEM files moved to separate module (Fixes
3323     ticket #13). Also possible to remove PEM support for
3324     systems only using DER encoding
3325
3326Bugfixes
3327   * Corrected parsing of UTCTime dates before 1990 and
3328     after 1950
3329   * Support more exotic OID's when parsing certificates
3330     (found by Mads Kiilerich)
3331   * Support more exotic name representations when parsing
3332     certificates (found by Mads Kiilerich)
3333   * Replaced the expired test certificates
3334   * Do not bail out if no client certificate specified. Try
3335     to negotiate anonymous connection (Fixes ticket #12,
3336     found by Boris Krasnovskiy)
3337
3338Security fixes
3339   * Fixed a possible Man-in-the-Middle attack on the
3340     Diffie Hellman key exchange (thanks to Larry Highsmith,
3341     Subreption LLC)
3342
3343= Version 0.99-pre1 released on 2011-01-30
3344Features
3345Note: Most of these features have been donated by Fox-IT
3346   * Added Doxygen source code documentation parts
3347   * Added reading of DHM context from memory and file
3348   * Improved X509 certificate parsing to include extended
3349     certificate fields, including Key Usage
3350   * Improved certificate verification and verification
3351     against the available CRLs
3352   * Detection for DES weak keys and parity bits added
3353   * Improvements to support integration in other
3354     applications:
3355       + Added generic message digest and cipher wrapper
3356       + Improved information about current capabilities,
3357         status, objects and configuration
3358       + Added verification callback on certificate chain
3359         verification to allow external blacklisting
3360       + Additional example programs to show usage
3361   * Added support for PKCS#11 through the use of the
3362     libpkcs11-helper library
3363
3364Changes
3365   * x509parse_time_expired() checks time in addition to
3366     the existing date check
3367   * The ciphers member of ssl_context and the cipher member
3368     of ssl_session have been renamed to ciphersuites and
3369     ciphersuite respectively. This clarifies the difference
3370     with the generic cipher layer and is better naming
3371     altogether
3372
3373= Version 0.14.0 released on 2010-08-16
3374Features
3375   * Added support for SSL_EDH_RSA_AES_128_SHA and
3376     SSL_EDH_RSA_CAMELLIA_128_SHA ciphersuites
3377   * Added compile-time and run-time version information
3378   * Expanded ssl_client2 arguments for more flexibility
3379   * Added support for TLS v1.1
3380
3381Changes
3382   * Made Makefile cleaner
3383   * Removed dependency on rand() in rsa_pkcs1_encrypt().
3384     Now using random fuction provided to function and
3385     changed the prototype of rsa_pkcs1_encrypt(),
3386     rsa_init() and rsa_gen_key().
3387   * Some SSL defines were renamed in order to avoid
3388     future confusion
3389
3390Bug fixes
3391   * Fixed CMake out of source build for tests (found by
3392     kkert)
3393   * rsa_check_private() now supports PKCS1v2 keys as well
3394   * Fixed deadlock in rsa_pkcs1_encrypt() on failing random
3395     generator
3396
3397= Version 0.13.1 released on 2010-03-24
3398Bug fixes
3399   * Fixed Makefile in library that was mistakenly merged
3400   * Added missing const string fixes
3401
3402= Version 0.13.0 released on 2010-03-21
3403Features
3404   * Added option parsing for host and port selection to
3405     ssl_client2
3406   * Added support for GeneralizedTime in X509 parsing
3407   * Added cert_app program to allow easy reading and
3408     printing of X509 certificates from file or SSL
3409     connection.
3410
3411Changes
3412   * Added const correctness for main code base
3413   * X509 signature algorithm determination is now
3414     in a function to allow easy future expansion
3415   * Changed symmetric cipher functions to
3416     identical interface (returning int result values)
3417   * Changed ARC4 to use separate input/output buffer
3418   * Added reset function for HMAC context as speed-up
3419     for specific use-cases
3420
3421Bug fixes
3422   * Fixed bug resulting in failure to send the last
3423     certificate in the chain in ssl_write_certificate() and
3424     ssl_write_certificate_request() (found by fatbob)
3425   * Added small fixes for compiler warnings on a Mac
3426     (found by Frank de Brabander)
3427   * Fixed algorithmic bug in mpi_is_prime() (found by
3428     Smbat Tonoyan)
3429
3430= Version 0.12.1 released on 2009-10-04
3431Changes
3432   * Coverage test definitions now support 'depends_on'
3433     tagging system.
3434   * Tests requiring specific hashing algorithms now honor
3435     the defines.
3436
3437Bug fixes
3438   * Changed typo in #ifdef in x509parse.c (found
3439     by Eduardo)
3440
3441= Version 0.12.0 released on 2009-07-28
3442Features
3443   * Added CMake makefiles as alternative to regular Makefiles.
3444   * Added preliminary Code Coverage tests for AES, ARC4,
3445     Base64, MPI, SHA-family, MD-family, HMAC-SHA-family,
3446     Camellia, DES, 3-DES, RSA PKCS#1, XTEA, Diffie-Hellman
3447     and X509parse.
3448
3449Changes
3450   * Error codes are not (necessarily) negative. Keep
3451     this is mind when checking for errors.
3452   * RSA_RAW renamed to SIG_RSA_RAW for consistency.
3453   * Fixed typo in name of POLARSSL_ERR_RSA_OUTPUT_TOO_LARGE.
3454   * Changed interface for AES and Camellia setkey functions
3455     to indicate invalid key lengths.
3456
3457Bug fixes
3458   * Fixed include location of endian.h on FreeBSD (found by
3459     Gabriel)
3460   * Fixed include location of endian.h and name clash on
3461     Apples (found by Martin van Hensbergen)
3462   * Fixed HMAC-MD2 by modifying md2_starts(), so that the
3463     required HMAC ipad and opad variables are not cleared.
3464     (found by code coverage tests)
3465   * Prevented use of long long in bignum if
3466     POLARSSL_HAVE_LONGLONG not defined (found by Giles
3467     Bathgate).
3468   * Fixed incorrect handling of negative strings in
3469     mpi_read_string() (found by code coverage tests).
3470   * Fixed segfault on handling empty rsa_context in
3471     rsa_check_pubkey() and rsa_check_privkey() (found by
3472     code coverage tests).
3473   * Fixed incorrect handling of one single negative input
3474     value in mpi_add_abs() (found by code coverage tests).
3475   * Fixed incorrect handling of negative first input
3476     value in mpi_sub_abs() (found by code coverage tests).
3477   * Fixed incorrect handling of negative first input
3478     value in mpi_mod_mpi() and mpi_mod_int(). Resulting
3479     change also affects mpi_write_string() (found by code
3480     coverage tests).
3481   * Corrected is_prime() results for 0, 1 and 2 (found by
3482     code coverage tests).
3483   * Fixed Camellia and XTEA for 64-bit Windows systems.
3484
3485= Version 0.11.1 released on 2009-05-17
3486   * Fixed missing functionality for SHA-224, SHA-256, SHA384,
3487     SHA-512 in rsa_pkcs1_sign()
3488
3489= Version 0.11.0 released on 2009-05-03
3490   * Fixed a bug in mpi_gcd() so that it also works when both
3491     input numbers are even and added testcases to check
3492     (found by Pierre Habouzit).
3493   * Added support for SHA-224, SHA-256, SHA-384 and SHA-512
3494     one way hash functions with the PKCS#1 v1.5 signing and
3495     verification.
3496   * Fixed minor bug regarding mpi_gcd located within the
3497     POLARSSL_GENPRIME block.
3498   * Fixed minor memory leak in x509parse_crt() and added better
3499     handling of 'full' certificate chains (found by Mathias
3500     Olsson).
3501   * Centralized file opening and reading for x509 files into
3502     load_file()
3503   * Made definition of net_htons() endian-clean for big endian
3504     systems (Found by Gernot).
3505   * Undefining POLARSSL_HAVE_ASM now also handles prevents asm in
3506     padlock and timing code.
3507   * Fixed an off-by-one buffer allocation in ssl_set_hostname()
3508     responsible for crashes and unwanted behaviour.
3509   * Added support for Certificate Revocation List (CRL) parsing.
3510   * Added support for CRL revocation to x509parse_verify() and
3511     SSL/TLS code.
3512   * Fixed compatibility of XTEA and Camellia on a 64-bit system
3513     (found by Felix von Leitner).
3514
3515= Version 0.10.0 released on 2009-01-12
3516   * Migrated XySSL to PolarSSL
3517   * Added XTEA symmetric cipher
3518   * Added Camellia symmetric cipher
3519   * Added support for ciphersuites: SSL_RSA_CAMELLIA_128_SHA,
3520     SSL_RSA_CAMELLIA_256_SHA and SSL_EDH_RSA_CAMELLIA_256_SHA
3521   * Fixed dangerous bug that can cause a heap overflow in
3522     rsa_pkcs1_decrypt (found by Christophe Devine)
3523
3524================================================================
3525XySSL ChangeLog
3526
3527= Version 0.9 released on 2008-03-16
3528
3529    * Added support for ciphersuite: SSL_RSA_AES_128_SHA
3530    * Enabled support for large files by default in aescrypt2.c
3531    * Preliminary openssl wrapper contributed by David Barrett
3532    * Fixed a bug in ssl_write() that caused the same payload to
3533      be sent twice in non-blocking mode when send returns EAGAIN
3534    * Fixed ssl_parse_client_hello(): session id and challenge must
3535      not be swapped in the SSLv2 ClientHello (found by Greg Robson)
3536    * Added user-defined callback debug function (Krystian Kolodziej)
3537    * Before freeing a certificate, properly zero out all cert. data
3538    * Fixed the "mode" parameter so that encryption/decryption are
3539      not swapped on PadLock; also fixed compilation on older versions
3540      of gcc (bug reported by David Barrett)
3541    * Correctly handle the case in padlock_xcryptcbc() when input or
3542      output data is non-aligned by falling back to the software
3543      implementation, as VIA Nehemiah cannot handle non-aligned buffers
3544    * Fixed a memory leak in x509parse_crt() which was reported by Greg
3545      Robson-Garth; some x509write.c fixes by Pascal Vizeli, thanks to
3546      Matthew Page who reported several bugs
3547    * Fixed x509_get_ext() to accept some rare certificates which have
3548      an INTEGER instead of a BOOLEAN for BasicConstraints::cA.
3549    * Added support on the client side for the TLS "hostname" extension
3550      (patch contributed by David Patino)
3551    * Make x509parse_verify() return BADCERT_CN_MISMATCH when an empty
3552      string is passed as the CN (bug reported by spoofy)
3553    * Added an option to enable/disable the BN assembly code
3554    * Updated rsa_check_privkey() to verify that (D*E) = 1 % (P-1)*(Q-1)
3555    * Disabled obsolete hash functions by default (MD2, MD4); updated
3556      selftest and benchmark to not test ciphers that have been disabled
3557    * Updated x509parse_cert_info() to correctly display byte 0 of the
3558      serial number, setup correct server port in the ssl client example
3559    * Fixed a critical denial-of-service with X.509 cert. verification:
3560      peer may cause xyssl to loop indefinitely by sending a certificate
3561      for which the RSA signature check fails (bug reported by Benoit)
3562    * Added test vectors for: AES-CBC, AES-CFB, DES-CBC and 3DES-CBC,
3563      HMAC-MD5, HMAC-SHA1, HMAC-SHA-256, HMAC-SHA-384, and HMAC-SHA-512
3564    * Fixed HMAC-SHA-384 and HMAC-SHA-512 (thanks to Josh Sinykin)
3565    * Modified ssl_parse_client_key_exchange() to protect against
3566      Daniel Bleichenbacher attack on PKCS#1 v1.5 padding, as well
3567      as the Klima-Pokorny-Rosa extension of Bleichenbacher's attack
3568    * Updated rsa_gen_key() so that ctx->N is always nbits in size
3569    * Fixed assembly PPC compilation errors on Mac OS X, thanks to
3570      David Barrett and Dusan Semen
3571
3572= Version 0.8 released on 2007-10-20
3573
3574    * Modified the HMAC functions to handle keys larger
3575      than 64 bytes, thanks to Stephane Desneux and gary ng
3576    * Fixed ssl_read_record() to properly update the handshake
3577      message digests, which fixes IE6/IE7 client authentication
3578    * Cleaned up the XYSSL* #defines, suggested by Azriel Fasten
3579    * Fixed net_recv(), thanks to Lorenz Schori and Egon Kocjan
3580    * Added user-defined callbacks for handling I/O and sessions
3581    * Added lots of debugging output in the SSL/TLS functions
3582    * Added preliminary X.509 cert. writing by Pascal Vizeli
3583    * Added preliminary support for the VIA PadLock routines
3584    * Added AES-CFB mode of operation, contributed by chmike
3585    * Added an SSL/TLS stress testing program (ssl_test.c)
3586    * Updated the RSA PKCS#1 code to allow choosing between
3587      RSA_PUBLIC and RSA_PRIVATE, as suggested by David Barrett
3588    * Updated ssl_read() to skip 0-length records from OpenSSL
3589    * Fixed the make install target to comply with *BSD make
3590    * Fixed a bug in mpi_read_binary() on 64-bit platforms
3591    * mpi_is_prime() speedups, thanks to Kevin McLaughlin
3592    * Fixed a long standing memory leak in mpi_is_prime()
3593    * Replaced realloc with malloc in mpi_grow(), and set
3594      the sign of zero as positive in mpi_init() (reported
3595      by Jonathan M. McCune)
3596
3597= Version 0.7 released on 2007-07-07
3598
3599    * Added support for the MicroBlaze soft-core processor
3600    * Fixed a bug in ssl_tls.c which sometimes prevented SSL
3601      connections from being established with non-blocking I/O
3602    * Fixed a couple bugs in the VS6 and UNIX Makefiles
3603    * Fixed the "PIC register ebx clobbered in asm" bug
3604    * Added HMAC starts/update/finish support functions
3605    * Added the SHA-224, SHA-384 and SHA-512 hash functions
3606    * Fixed the net_set_*block routines, thanks to Andreas
3607    * Added a few demonstration programs: md5sum, sha1sum,
3608      dh_client, dh_server, rsa_genkey, rsa_sign, rsa_verify
3609    * Added new bignum import and export helper functions
3610    * Rewrote README.txt in program/ssl/ca to better explain
3611      how to create a test PKI
3612
3613= Version 0.6 released on 2007-04-01
3614
3615    * Ciphers used in SSL/TLS can now be disabled at compile
3616      time, to reduce the memory footprint on embedded systems
3617    * Added multiply assembly code for the TriCore and modified
3618      havege_struct for this processor, thanks to David Patiño
3619    * Added multiply assembly code for 64-bit PowerPCs,
3620      thanks to Peking University and the OSU Open Source Lab
3621    * Added experimental support of Quantum Cryptography
3622    * Added support for autoconf, contributed by Arnaud Cornet
3623    * Fixed "long long" compilation issues on IA-64 and PPC64
3624    * Fixed a bug introduced in xyssl-0.5/timing.c: hardclock
3625      was not being correctly defined on ARM and MIPS
3626
3627= Version 0.5 released on 2007-03-01
3628
3629    * Added multiply assembly code for SPARC and Alpha
3630    * Added (beta) support for non-blocking I/O operations
3631    * Implemented session resuming and client authentication
3632    * Fixed some portability issues on WinCE, MINIX 3, Plan9
3633      (thanks to Benjamin Newman), HP-UX, FreeBSD and Solaris
3634    * Improved the performance of the EDH key exchange
3635    * Fixed a bug that caused valid packets with a payload
3636      size of 16384 bytes to be rejected
3637
3638= Version 0.4 released on 2007-02-01
3639
3640    * Added support for Ephemeral Diffie-Hellman key exchange
3641    * Added multiply asm code for SSE2, ARM, PPC, MIPS and M68K
3642    * Various improvement to the modular exponentiation code
3643    * Rewrote the headers to generate the API docs with doxygen
3644    * Fixed a bug in ssl_encrypt_buf (incorrect padding was
3645      generated) and in ssl_parse_client_hello (max. client
3646      version was not properly set), thanks to Didier Rebeix
3647    * Fixed another bug in ssl_parse_client_hello: clients with
3648      cipherlists larger than 96 bytes were incorrectly rejected
3649    * Fixed a couple memory leak in x509_read.c
3650
3651= Version 0.3 released on 2007-01-01
3652
3653    * Added server-side SSLv3 and TLSv1.0 support
3654    * Multiple fixes to enhance the compatibility with g++,
3655      thanks to Xosé Antón Otero Ferreira
3656    * Fixed a bug in the CBC code, thanks to dowst; also,
3657      the bignum code is no longer dependent on long long
3658    * Updated rsa_pkcs1_sign to handle arbitrary large inputs
3659    * Updated timing.c for improved compatibility with i386
3660      and 486 processors, thanks to Arnaud Cornet
3661
3662= Version 0.2 released on 2006-12-01
3663
3664    * Updated timing.c to support ARM and MIPS arch
3665    * Updated the MPI code to support 8086 on MSVC 1.5
3666    * Added the copyright notice at the top of havege.h
3667    * Fixed a bug in sha2_hmac, thanks to newsoft/Wenfang Zhang
3668    * Fixed a bug reported by Adrian Rüegsegger in x509_read_key
3669    * Fixed a bug reported by Torsten Lauter in ssl_read_record
3670    * Fixed a bug in rsa_check_privkey that would wrongly cause
3671      valid RSA keys to be dismissed (thanks to oldwolf)
3672    * Fixed a bug in mpi_is_prime that caused some primes to fail
3673      the Miller-Rabin primality test
3674
3675    I'd also like to thank Younès Hafri for the CRUX linux port,
3676    Khalil Petit who added XySSL into pkgsrc and Arnaud Cornet
3677    who maintains the Debian package :-)
3678
3679= Version 0.1 released on 2006-11-01
3680