xref: /OK3568_Linux_fs/u-boot/include/configs/corvus.h (revision 4882a59341e53eb6f0b4789bf948001014eff981)
1 /*
2  * Common board functions for siemens AT91SAM9G45 based boards
3  * (C) Copyright 2013 Siemens AG
4  *
5  * Based on:
6  * U-Boot file: include/configs/at91sam9m10g45ek.h
7  * (C) Copyright 2007-2008
8  * Stelian Pop <stelian@popies.net>
9  * Lead Tech Design <www.leadtechdesign.com>
10  *
11  * SPDX-License-Identifier:	GPL-2.0+
12  */
13 
14 #ifndef __CONFIG_H
15 #define __CONFIG_H
16 
17 #include <asm/hardware.h>
18 #include <linux/sizes.h>
19 
20 /*
21  * Warning: changing CONFIG_SYS_TEXT_BASE requires
22  * adapting the initial boot program.
23  * Since the linker has to swallow that define, we must use a pure
24  * hex number here!
25  */
26 
27 #define CONFIG_SYS_TEXT_BASE  0x72000000
28 
29 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
30 
31 /* ARM asynchronous clock */
32 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
33 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
34 
35 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
36 #define CONFIG_SETUP_MEMORY_TAGS
37 #define CONFIG_INITRD_TAG
38 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
39 
40 /* general purpose I/O */
41 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
42 #define CONFIG_AT91_GPIO
43 #define CONFIG_AT91_GPIO_PULLUP	1	/* keep pullups on peripheral pins */
44 
45 /* serial console */
46 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
47 #define CONFIG_USART_ID			ATMEL_ID_SYS
48 
49 /* LED */
50 #define CONFIG_AT91_LED
51 #define CONFIG_RED_LED		AT91_PIN_PD31	/* this is the user1 led */
52 #define CONFIG_GREEN_LED	AT91_PIN_PD0	/* this is the user2 led */
53 
54 
55 /*
56  * BOOTP options
57  */
58 #define CONFIG_BOOTP_BOOTFILESIZE
59 #define CONFIG_BOOTP_BOOTPATH
60 #define CONFIG_BOOTP_GATEWAY
61 #define CONFIG_BOOTP_HOSTNAME
62 
63 /* SDRAM */
64 #define CONFIG_NR_DRAM_BANKS		1
65 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS6
66 #define CONFIG_SYS_SDRAM_SIZE		0x08000000
67 
68 #define CONFIG_SYS_INIT_SP_ADDR \
69 	(CONFIG_SYS_SDRAM_BASE + SZ_32K - GENERATED_GBL_DATA_SIZE)
70 
71 /* NAND flash */
72 #ifdef CONFIG_CMD_NAND
73 #define CONFIG_SYS_MAX_NAND_DEVICE		1
74 #define CONFIG_SYS_NAND_BASE			ATMEL_BASE_CS3
75 #define CONFIG_SYS_NAND_DBW_8
76 /* our ALE is AD21 */
77 #define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
78 /* our CLE is AD22 */
79 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
80 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
81 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC8
82 #endif
83 
84 /* Ethernet */
85 #define CONFIG_MACB
86 #define CONFIG_RMII
87 #define CONFIG_NET_RETRY_COUNT		20
88 #define CONFIG_AT91_WANTS_COMMON_PHY
89 
90 /* DFU class support */
91 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	(SZ_1M)
92 #define DFU_MANIFEST_POLL_TIMEOUT	25000
93 
94 #define CONFIG_SYS_LOAD_ADDR	ATMEL_BASE_CS6
95 
96 /* bootstrap + u-boot + env in nandflash */
97 #define CONFIG_ENV_OFFSET		0x100000
98 #define CONFIG_ENV_OFFSET_REDUND	0x180000
99 #define CONFIG_ENV_SIZE			SZ_128K
100 
101 #define CONFIG_BOOTCOMMAND						\
102 	"nand read 0x70000000 0x200000 0x300000;"			\
103 	"bootm 0x70000000"
104 
105 #define CONFIG_SYS_LONGHELP
106 #define CONFIG_CMDLINE_EDITING
107 #define CONFIG_AUTO_COMPLETE
108 
109 /*
110  * Size of malloc() pool
111  */
112 #define CONFIG_SYS_MALLOC_LEN	ROUND(3 * CONFIG_ENV_SIZE + \
113 				SZ_4M, 0x1000)
114 
115 /* Defines for SPL */
116 #define CONFIG_SPL_FRAMEWORK
117 #define CONFIG_SPL_TEXT_BASE		0x300000
118 #define CONFIG_SPL_MAX_SIZE		(12 * SZ_1K)
119 #define CONFIG_SPL_STACK		(SZ_16K)
120 
121 #define CONFIG_SPL_BSS_START_ADDR	CONFIG_SPL_MAX_SIZE
122 #define CONFIG_SPL_BSS_MAX_SIZE		(SZ_2K)
123 
124 #define CONFIG_SPL_NAND_DRIVERS
125 #define CONFIG_SPL_NAND_BASE
126 #define CONFIG_SPL_NAND_ECC
127 #define CONFIG_SPL_NAND_RAW_ONLY
128 #define CONFIG_SPL_NAND_SOFTECC
129 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x20000
130 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
131 #define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
132 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
133 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
134 
135 #define CONFIG_SYS_NAND_PAGE_SIZE	SZ_2K
136 #define CONFIG_SYS_NAND_BLOCK_SIZE	(SZ_128K)
137 #define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
138 					 CONFIG_SYS_NAND_PAGE_SIZE)
139 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
140 #define CONFIG_SYS_NAND_ECCSIZE		256
141 #define CONFIG_SYS_NAND_ECCBYTES	3
142 #define CONFIG_SYS_NAND_OOBSIZE		64
143 #define CONFIG_SYS_NAND_ECCPOS		{ 40, 41, 42, 43, 44, 45, 46, 47, \
144 					  48, 49, 50, 51, 52, 53, 54, 55, \
145 					  56, 57, 58, 59, 60, 61, 62, 63, }
146 
147 #define CONFIG_SPL_ATMEL_SIZE
148 #define CONFIG_SYS_MASTER_CLOCK		132096000
149 #define AT91_PLL_LOCK_TIMEOUT		1000000
150 #define CONFIG_SYS_AT91_PLLA		0x20c73f03
151 #define CONFIG_SYS_MCKR			0x1301
152 #define CONFIG_SYS_MCKR_CSS		0x1302
153 
154 #endif
155