1*4882a593SmuzhiyunMIPS Malta board 2*4882a593Smuzhiyun 3*4882a593SmuzhiyunHow to flash using a MIPS Navigator Probe: 4*4882a593Smuzhiyun 5*4882a593Smuzhiyun - Ensure that your Malta has jumper JP1 fitted. Without this jumper you will 6*4882a593Smuzhiyun be unable to flash your Malta using a Navigator Probe. 7*4882a593Smuzhiyun 8*4882a593Smuzhiyun - Connect Navigator Console to your probe and Malta as usual. 9*4882a593Smuzhiyun 10*4882a593Smuzhiyun - Within Navigator Console run the following commands: 11*4882a593Smuzhiyun 12*4882a593Smuzhiyun source /path/to/u-boot/board/imgtec/malta/flash-malta-boot.tcl 13*4882a593Smuzhiyun reset 14*4882a593Smuzhiyun flash-boot /path/to/u-boot/u-boot.bin 15*4882a593Smuzhiyun 16*4882a593Smuzhiyun - You should now be able to reboot your Malta to a U-Boot shell. 17