1*4882a593SmuzhiyunAndes Technology SoC AG101P 2*4882a593Smuzhiyun=========================== 3*4882a593Smuzhiyun 4*4882a593SmuzhiyunAG101P is the mainline SoC produced by Andes Technology using N1213 CPU core 5*4882a593Smuzhiyunwith FPU and DDR contoller support. 6*4882a593SmuzhiyunAG101P has integrated both AHB and APB bus and many periphals for application 7*4882a593Smuzhiyunand product development. 8*4882a593Smuzhiyun 9*4882a593SmuzhiyunADP-AG101P 10*4882a593Smuzhiyun========= 11*4882a593Smuzhiyun 12*4882a593SmuzhiyunADP-AG101P is the SoC with AG101 hardcore CPU. 13*4882a593Smuzhiyun 14*4882a593SmuzhiyunConfigurations 15*4882a593Smuzhiyun============== 16*4882a593Smuzhiyun 17*4882a593SmuzhiyunCONFIG_MEM_REMAP: 18*4882a593Smuzhiyun Doing memory remap is essential for preparing some non-OS or RTOS 19*4882a593Smuzhiyun applications. 20*4882a593Smuzhiyun 21*4882a593SmuzhiyunCONFIG_SKIP_LOWLEVEL_INIT: 22*4882a593Smuzhiyun If you want to boot this system from SPI ROM and bypass e-bios (the 23*4882a593Smuzhiyun other boot loader on ROM). You should undefine CONFIG_SKIP_LOWLEVEL_INIT 24*4882a593Smuzhiyun in "include/configs/adp-ag101p.h". 25*4882a593Smuzhiyun 26*4882a593SmuzhiyunBuild and boot steps 27*4882a593Smuzhiyun==================== 28*4882a593Smuzhiyun 29*4882a593Smuzhiyunbuild: 30*4882a593Smuzhiyun1. Prepare the toolchains and make sure the $PATH to toolchains is correct. 31*4882a593Smuzhiyun2. Use `make adp-ag101p_defconfig` in u-boot root to build the image. 32*4882a593Smuzhiyun 33*4882a593SmuzhiyunBurn u-boot to SPI ROM: 34*4882a593Smuzhiyun==================== 35*4882a593Smuzhiyun 36*4882a593SmuzhiyunThis section will be added later. 37