1*4882a593SmuzhiyunBoard information 2*4882a593Smuzhiyun----------------- 3*4882a593Smuzhiyun 4*4882a593SmuzhiyunThe evaluation board "pbab01" is thought to be used 5*4882a593Smuzhiyuntogether with the SOM. 6*4882a593Smuzhiyun 7*4882a593SmuzhiyunMore information on the board can be found on manufacturer's 8*4882a593Smuzhiyunwebsite: 9*4882a593Smuzhiyun 10*4882a593Smuzhiyunhttp://www.phytec.de/produkt/system-on-modules/phyflex-imx-6/ 11*4882a593Smuzhiyun 12*4882a593SmuzhiyunBuilding U-Boot 13*4882a593Smuzhiyun------------------------------- 14*4882a593Smuzhiyun 15*4882a593Smuzhiyun$ make pfla02_defconfig 16*4882a593Smuzhiyun$ make 17*4882a593Smuzhiyun 18*4882a593SmuzhiyunThis generates the artifacts SPL and u-boot.img. 19*4882a593SmuzhiyunThe SOM can boot from NAND or from SD-Card, having the SPI-NOR 20*4882a593Smuzhiyunas second option. 21*4882a593SmuzhiyunThe dip switch "SW3" on the board let choose the boot device. 22*4882a593Smuzhiyun 23*4882a593SmuzhiyunSW3_1(on), SW3_2(on), SW3_3(off): Boot first from SD, then try SPI 24*4882a593SmuzhiyunSW3_1(off), SW3_2(on), SW3_3(off): Boot from SPI 25